TY - GEN A1 - Herrmann, Stefan T1 - Charakterisierung zweier monoklonaler Antikörper zur Detektion von Sprengstoffen N2 - In 2019 over 30 000 people were killed or injured by explosions caused by explosives like TNT, PETN, HMX and RDX. Therefore, highly sensitive assays for the detection of TNT are needed. In this study we compared two commercially available TNT antibodies: A1.1.1 and EW75C with a highly optimized indirect competitive ELISA based on a BSA-TNA conjugate. As a result, a precision profile for both antibodies was determined with a LOD of 170 pmol L-1 for the clone A1.1.1 and a LOD of 3,2 nmol L-1 for the clone EW75C. The measurements showed that the clone A1.1.1 is a highly sensitive antibody for the detection of TNT while the clone EW75C does show medium performance at most. In the cross-reactivity characterization of both antibodies many substances, closely related to the structure of TNT were tested. Both antibodies showed strong cross reactivity with trinitroaniline and trinitrobenzene. For the clone A1.1.1, which is known to originate from immunization of mice with an TNP-glycine-KLH conjugate, this has to be expected. Interestingly the clone EW75C, which was not characterized yet, showed similar behavior. This suggests a TNA-conjugate as immunogen for the EW75C antibody as well. None of both antibodies showed cross-reactions to the high explosives PETN, HMX and RDX. Also, the cross-reactions of nitro musks with the antibodies were investigated. Despite their prohibition, nitro musks are still used in Asia especially and are particularly popular in India. The overall superior clone A1.1.1 showed a significant cross-reactivity to musk ambrette. For practical reasons the influence of musk ambrette on this assay when used in natural environment should be investigated. In further experiments, the highly sensitive TNT antibody A1.1.1 was digested with papain to obtain monovalent Fab-fragments. Due to its high stability against the digestion, a custom protocol for the IgG1 subclass of mice, to which the clone A1.1.1 belongs, was developed, resulting in a quantitative digestion of the intact antibody to Fab fragments. The success of the digestion was determined with MALDI-TOF-MS and SDS-PAGE. It was shown that this protocol worked for many different antibodies of IgG1 subclass as well. KW - TNT KW - Trinitrotoluol KW - Nitroaromaten KW - Nitromoschus KW - Duftstoffe KW - ELISA KW - Immunoassay KW - Antibody KW - Explosives KW - Klon A1.1.1 KW - Klon EW75C KW - Fab Fragment KW - Kreuzreaktion KW - Crossreactivity KW - Precision Profile KW - Präzisionsprofil KW - Affinity KW - Affinitätskonstante KW - IC50 PY - 2020 SP - 1 EP - 113 PB - Hochschule für Technik und Wirtschaft Berlin - htw CY - Berlin AN - OPUS4-54556 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian T1 - Misuse of pyrotechnics - a hazard assessment N2 - The contribution focuses on intentional misuse of pyrotechnic articles, which are for the EU-market CE-marked and tested according to an intended use as declared by the manufacturer. Specific properties of the articles and associated hazards in view of the intended use and - in comparison - the illegal use are presented. Moreover, the basic concepts of the conformity assessment procedures and selected standard requirements for the articles concerned are described. T2 - Security of Explosives pan-European Specialists Network — EXERTER, Virtual Conference - Year 4, topic: “Criminal use of explosives” CY - Online meeting DA - 06.04.2022 KW - Misuse KW - Pyrotechnics KW - Explosives KW - Intended use PY - 2022 AN - OPUS4-54614 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander T1 - Considerations on energy deposition with the BAM-Fallhammer N2 - The aim of this study is to quantify how much a real Fallhammer deviates from the idealised functioning, and what the differences between different Fallhammers in different laboratories are. Such a comparison has never been done and data have not been collected in a consistent way. Further it is the aim to develop guidance on the mechanical properties of the Fallhammer, which can be used for internal quality control, validation of the correct functioning of the Fallhammer, and preparation of Round-Robin tests. An established and verified mechanical status of a Fallhammer would greatly improve the quality and comparability of results and Round-Robin tests on the impact sensitivity of explosives. T2 - et users group meeting CY - Park City, Utah, USA DA - 11.10.2016 KW - Impact sensitivity KW - Explosives KW - BAM-Fallhammer PY - 2016 AN - OPUS4-37804 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander T1 - Identification of explosives applying Raman-spectroscopy N2 - A hand-held Raman spectrometer has been used to identify various explosives and spectra are made available to the scientific community. T2 - 18th International Conference of Chief Inspectors of Explosives CY - Ottawa, Kanada DA - 15.04.2018 KW - Raman spectroscopy KW - Explosives PY - 2018 AN - OPUS4-44852 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Léonard, Fabien A1 - Zhang, Zhen A1 - Krebs, Holger A1 - Bruno, Giovanni T1 - Structural and Morphological Quantitative 3D Characterisation of Ammonium Nitrate Prills by X-ray Computed Tomography N2 - The mixture of ammonium nitrate (AN) prills and fuel oil (FO), usually referred to as ANFO, is extensively used in the mining industry as a bulk explosive. One of the major performance predictors of ANFO mixtures is the fuel oil retention, which is itself governed by the complex pore structure of the AN prills. In this study, we present how X-ray computed tomography (XCT), and the associated advanced data processing workflow, can be used to fully characterise the structure and morphology of AN prills. We show that structural parameters such as volume fraction of the different phases and morphological parameters such as specific surface area and shape factor can be reliably extracted from the XCT data, and that there is a good agreement with the measured oil retention values. Importantly, oil retention measurements (qualifying the efficiency of ANFO as explosives) correlate well with the specific surface area determined by XCT. XCT can therefore be employed non-destructively; it can accurately evaluate and characterise porosity in ammonium nitrate prills, and even predict their efficiency. KW - ANFO KW - Explosives KW - Surface area KW - Porosity KW - XCT KW - Data processing PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-505395 VL - 13 IS - 5 (Special Issue "Micro Non-Destructive Testing and Evaluation") SP - 1230 PB - MDPI AN - OPUS4-50539 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Léonard, Fabien T1 - Overview of XCT data processing workflow for ammonium nitrate prills quantitative analysis N2 - This video presents the data processing workflow that was developed to perform the quantitative structural and morphological analysis of ammonium nitrate prills by x-ray computed tomography. KW - ANFO KW - Data processing KW - Explosives KW - Porosity KW - Surface area KW - XCT PY - 2020 U6 - https://doi.org/10.5281/zenodo.3611339 PB - Zenodo CY - Geneva AN - OPUS4-51897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander T1 - BAM Projects and Areas of Interest in Explosives and Testing N2 - This is a short review on ongoing work and interests in Division 2.6 of BAM with a focus on transport regulations and related testing. The behaviour of primer caps in different packaging configurations is addressed and the new apparatus for the "Minimum Burning Pressure" test is presented. Further topics regarding classification are touched with the aim to attract comments and stimulate cooperation internationally. T2 - IGUS EPP & CIE Virtual Meeting #1 CY - Online meeting DA - 16.03.2021 KW - Explosives KW - Class 1 KW - Classification KW - Primer caps KW - UN-test methods PY - 2021 AN - OPUS4-52306 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander T1 - Validation of the BAM drop test and BAM friction test by dry runs N2 - Examinations of the mechanical properties of the BAM drop hammer and the BAM friction test were done recently. In order to validate the correct functioning of both tests, usually Round-Robin tests are done with selected test substances. A relatively large spread of the results including some outliers is usually accepted and attributed to the nature of the tests. The author asked, however, in how much the mere mechanical properties could already differ between different institutes, even when no substance is involved (dry runs). A thorough inter-laboratory study was done for the drop test, and results for the friction test are on its way. The current state of these investigations will be presented. T2 - EPP Working Group of IGUS and 17th International Conference of Chief Inspectors of Explosives CY - Xi'an, China DA - 17.04.2017 KW - BAM-Reibapparat KW - Explosivstoffe KW - Schlagempfindlichkeit KW - Reibempfindlichkeit KW - BAM-Fallhammer KW - BAM drop test KW - Impact sensitivity KW - Friction sensitivity KW - Explosives KW - BAM friction test PY - 2017 AN - OPUS4-39998 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander T1 - Process hazard analysis and other aspects of occupational safety and health N2 - Controlling the hazards in explosives manufacture has been addressed ever since such substances have entered industrial processing. The rigour of exercising such control appears to vary in different fields of application (fireworks versus blasting explosives) and in different countries worldwide. Nonetheless, each tradition has developed a set of standard tests addressing sensitivity and other aspects of behaviour of explosives. With a full system of workers protection in place in most countries nowadays, the control of hazards in explosives manufacture has become much more formalised. The paper aims to show the common parts of process hazard analysis and the consequential steps involving either a risk based approach or a prescriptive approach. The paper aims to stimulate discussions about recent developments. T2 - EPP Working Group of IGUS and 17th International Conference of Chief Inspectors of Explosives CY - Xi'an, China DA - 17.04.2017 KW - Gefährdungsbeurteilung KW - Explosivstoffe KW - Explosives KW - Process hazard analysis PY - 2017 AN - OPUS4-39999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Léonard, Fabien A1 - Hasenfelder, Uta A1 - Krebs, Holger A1 - Bruno, Giovanni T1 - Assessment of shock tube systems by synchrotron X-ray computed tomography N2 - Shock tube systems are non-electric explosive fuses employed in blasting and demolition applications to trigger the detonation of explosive charges. Their working principle is based on the explosive reaction of a fine explosive powder on the tubing's inner surface, generating a shock wave traveling at a velocity of 2,100 m/s along the length of the tube, without destroying it. One of the key aspects of the manufacturing process of these shock tubes is the size and morphology of the explosive powder grains and their distribution on the inner wall of the tube, in order to propagate the shockwave efficiently and reliably. For the first time, synchrotron X-ray computed tomography has been used to characterize non-destructively the explosive powder grains, typically Al/HMX between 10 and 20 μm in size, in terms of morphology and 3D distribution but also to characterise the presence and location of defects within the shock tube walls. KW - Explosives KW - Nonel KW - Shock wave KW - Blasting KW - Energetic systems PY - 2017 UR - http://www.ndt.net/events/iCT2017/app/content/Paper/61_Leonard.pdf SP - 1 EP - 7 CY - Leuven, Belgium AN - OPUS4-39345 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -