TY - CONF A1 - Schröpfer, Dirk T1 - Beanspruchungen bei der Fertigung hochfester Komponenten N2 - Hochfeste und -warmfeste Legierungen nehmen in vielen Bereichen des Maschinen- und Anlagenbaus eine immer größere Rolle ein, deren Wirtschaftlichkeit und Effizienz durch eine kostensparende und präzise fügetechnische und abtragende Fertigung bestimmt wird. Komponenten aus modernen hochfesten Werkstoffen erfordern aufgrund ihres spezifischen Legierungskonzeptes und Gefüges und der oft hohen thermo-mechanischen Belastungen speziell adaptierte Fertigungsabläufe. Der Beitrag stellt einige Themenschwerpunkte vor, bei denen fertigungsbedingte Beanspruchungen und Eigenschaftsdegradationen an hochinnovativen Werkstoffen optimiert und wirtschaftliche Fertigungsbedingungen untersucht werden. T2 - Forschungsseminar OVGU CY - Magdeburg, Germany DA - 15.11.2018 KW - Eigenspannungen KW - MAG-Schweißen KW - Hochfeste Feinkornbaustähle KW - Bauteilprüfung KW - Zerspanung KW - HEA KW - Hochtemperaturwerkstoffe PY - 2018 AN - OPUS4-46608 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröpfer, Dirk T1 - Beanspruchungen bei der Fertigung hochfester Komponenten N2 - Hochfeste und -warmfeste Legierungen nehmen in vielen Bereichen des Maschinen- und Anlagenbaus eine immer größere Rolle ein, deren Wirtschaftlichkeit und Effizienz durch eine kostensparende und präzise fügetechnische und abtragende Fertigung bestimmt wird. Komponenten aus modernen hochfesten Werkstoffen erfordern aufgrund ihres spezifischen Legierungskonzeptes und Gefüges und der oft hohen thermo-mechanischen Belastungen speziell adaptierte Fertigungsabläufe. Der Beitrag stellt einige Themenschwerpunkte vor, bei denen fertigungsbedingte Beanspruchungen und Eigenschaftsdegradationen an hochinnovativen Werkstoffen optimiert und wirtschaftliche Fertigungsbedingungen untersucht werden. T2 - Forschungsseminar, Access, Aachen CY - Aachen, Germany DA - 19.11.2018 KW - Bauteilprüfung KW - Eigenspannungen KW - Hochfeste Feinkornbaustähle KW - HEA KW - Hochtemperaturwerkstoffe KW - MAG-Schweißen KW - Zerspanung PY - 2018 AN - OPUS4-47723 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yusenko, Kirill T1 - Reaction of high-entropy alloys with hydrogen under extreme conditions N2 - In the current study, we investigate an interaction under high-pressure high-temperature of single phase fcc-, hcp- and bcc-structured high-entropy alloys with hydrogen, carbon and nitrogen to obtain high-entropy hydrides, carbides and nitrides. Structural changes in high-entropy alloys upon compression and heating in the presence of these light elements are in the focus of our investigation. An easy route to high-entropy hydrides, carbides and nitrides will open new synthetic horizons in compositionally complex materials. Our study suggests that high-entropy alloys form high- entropy hydrides mainly with a composition close to M:H 1:1 ratio. Hydrides can be obtained under compression with hydrogen as a pressure compression medium or using hydrogen fluid as reactive agent. T2 - Intermetallics 2023 CY - Bad Staffelstein, Germany DA - 03.10.2023 KW - HEA PY - 2023 AN - OPUS4-58555 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Wencke A1 - Stephan-Scherb, Christiane A1 - Karafiludis, Stephanos A1 - Schneider, Mike A1 - Laplanche, Guillaume T1 - High temperature corrosion of high (HEA) and medium (MEA) entropy alloys N2 - The high-temperature corrosion behavior of the medium-entropy alloy Cr33Co33Ni33 (MEA) and the high-entropy alloy Fe20Cr20Co20Ni20Mn20 (HEA) in a mixed gas atmosphere of 10% H2O-2% O2 -0.5% SO2 + Ar as carrier gas [Vol.%] at 800 °C with duration times of t = 24h, 48h and 96h was investigated. Both alloys have a single-phase fcc microstructure. The oxidation kinetics of the HEA-CrMnFeCoNi roughly followed a linear rate law and a slow oxide growth was observable for the MEA-CrCoNi. The scale thickness of the corrosion layer in the quinary alloy increased with exposure time, while the scale thickness in the ternary alloy remained constant at around 1 µm. The MEA-CrCoNi developed a protective Cr2O3 layer with minor buckled parts. Co,Ni-chromite (Co,Ni)Cr2O4 was detected by XRD in minor amounts. The scale on HEA-CrMnFeCoNi displayed a triplex structure of a thin, continuous, inner Cr2O3 layer, a dense, intermediate Mn3O4 layer, and a thick, outer, porous layer consisting of Mn3O4 and MnSO4. Sulphides were only identified in the matrix of HEA-CrMnFeCoNi. Thermodynamic equilibrium calculations with FactSage (Log(S2) vs. Log(O2), ΔG of reactions) are in good agreement with these observations. The intense diffusion of Cr in the ternary alloy leads to an immediate formation of a protective Cr2O3 layer. The fast diffusion of Mn through the bulk HEA material and through the formed Cr2O3 layer compared to the other alloying elements is considered as the rate-limiting process. T2 - DMG Sektionstreffen Angewandte Mineralogie und Kristallographie CY - Online meeting DA - 25.02.2021 KW - Cr2O3 KW - High-Temperature Corrosion KW - HEA KW - MEA PY - 2021 AN - OPUS4-52164 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -