TY - CONF A1 - Dieck, S. A1 - Ecke, M. A1 - Rosemann, Paul A1 - Halle, T. T1 - Reversed austenite for enhancing ductility of martensitic stainless steel N2 - Quenching and partitioning (Q&P) heat Treatment increases the deformability of high-strength martensitic steels. Therefore, it is necessary to have some metastable austenite in the microstructure, which transforms in martensite during plastic deformation (TRIP effect). The austenitic-martensitic microstructure is gained by an increased austenitization temperature, water quenching and additional partitioning. The partitioning enables local carbon diffusion, which stabilizes retained austenite and leads to partial reversion of martensite to austenite. The influence of partitioning time was studied for the martensitic stainless steel AISI 420 (X46Cr13, 1.4034). In line with these efforts, metallographic, XRD and EBSD measurements were performed to characterize the microstructural evolution. The mechanical properties were tested using tension and compression loading. Additional corrosion investigations showed the benefits of Q&P heat treatment compared to conventional tempering. The reversion of austenite by the partitioning treatment was verified with EBSD and XRD. Furthermore, the results of the mechanical and corrosion testing showed improved properties due to the Q&P heat treatment. T2 - International Conference on Martensitic Transformations CY - Chicago, IL, USA DA - 09.07.2017 KW - Heat treatment KW - High ductility KW - Martensitic stainless steels KW - Quenching and partitioning KW - Transformation induced plasticity KW - KorroPad KW - EBSD KW - Mechanical testing PY - 2018 SN - 978-3-319-76968-4 DO - https://doi.org/10.1007/978-3-319-76968-4_19 SP - 123 EP - 128 PB - Springer AN - OPUS4-44689 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Thoralf T1 - Korrosionsschutzmethoden N2 - Der Vortrag thematisiert die Grundlagen des Korrosionsschutzes. Dieser kann planungs-,werkstoff oder mediumsseitig erfolgen oder mit elektrochemischen Methoden umgesetzt werden. Der Vortrag beschreit die Korrosivitäten der Atmosphären und welche Maßnahmen für den Korrosionsschutz daraus abgeleitet werden können. T2 - Fachausbildung Kathodischer Korrosionsschutz - Grundlagenkurs für erdverlegte Anlagen, Stahlbeton und Innenschutz CY - Esslingen, Germany DA - 23.01.2018 KW - Korrosion KW - Korrosionsschutz KW - Bimetallkorrosion KW - Passivität PY - 2018 AN - OPUS4-44060 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Thoralf T1 - Korrosion metallischer Werkstoffe - Grundlagen N2 - Der Vortrag thematisiert die Grundlagen der Korrosion metallischer Werksoffe. Inhalt des Vortrags sind die Grundlagen zur Potentialbildung, die Teilreaktionen der Korrosionsreaktion, elektrochemische Versuche und deren Auswertung sowie die Grundlagen der Bimetallkorrosion. T2 - Fachausbildung Kathodischer Korrosionsschutz - Grundlagenkurs für erdverlegte Anlagen, Stahlbeton und Innenschutz CY - Esslingen, Germany DA - 23.01.2018 KW - Korrosion KW - Korrosionsschutz KW - Bimetallkorrosion KW - Potential PY - 2018 AN - OPUS4-44061 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lehmann, Jens A1 - Leonhard, H. T1 - Schnelltest für nichtrostende Stähle N2 - Rohrsysteme und Behälter aus nichtrostendem Stahl sind prinzipiell vor Korrosion geschützt. Ist die Passivschicht auf der Stahloberfläche jedoch beschädigt, geht dieser Schutz verloren. Das KorroPad-Verfahren ist ein Schnelltest zur Überprüfung der Passivschicht. Die Anwendung ist einfach und dauert nur 15 Minuten. KW - Nichtrostender Stahl KW - Korrosionsschnelltest KW - KorroPad KW - Passivschicht PY - 2018 SN - 0170-6993 VL - 45 IS - 3 SP - 40 EP - 41 PB - verlag moderne industrie GmbH CY - Landsberg am Lech AN - OPUS4-45039 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - So einfach und doch komplex – Grundlagen der Korrosion metallischer Werkstoffe N2 - Die grundlegenden Korrosionsprozesse sind mit wenigen chemischen Formeln beschrieben, aber Korrosion ist immer eine Systemeigenschaft zwischen dem Werkstoff, dem Medium in dem er eingesetzt wird und den konstruktiven Bedingungen. Das macht es zu einem komplexen System, indem alle Einflussfaktoren ganzheitlich berücksichtigt werden müssen. T2 - Metallbautechnisches Kolloquium - Verarbeitung von Edelstahl Rostfrei CY - Bruchsal, Germany DA - 14.05.2018 KW - Korrosion PY - 2018 AN - OPUS4-45040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Speziell – Das Korrosionsverhalten nichtrostender Stähle N2 - Das Korrosionsverhalten nichtrostender Stähle ist ein komplexes Zusammenspiel aus den Werkstoffeigenschaften, dem Umgebungsbedingungen und den konstruktiven Gegebenheiten. Viele Einflussfaktoren spielen eine Rolle. T2 - Metallbautechnisches Kolloquium - Verarbeitung von Edelstahl Rostfrei CY - Bruchsal, Germany DA - 14.05.2018 KW - Nichtrostender Stahl PY - 2018 AN - OPUS4-45041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Der Korropad Korrosionsschnelltest einfach, schnell, zerstörungsfrei N2 - Bauteile aus nichtrostendem Stahl sind mit einer Passivschicht vor Korrosion geschützt. Kritisch wird es, wenn diese Schicht unvollständig oder beschädigt ist. Mit dem KorroPad Korrosionsschnelltest kann man Fehlstellen innerhalb von nur 15 Minuten überführen - auch ohne Spezialwissen. T2 - Metallbautechnisches Kolloquium - Verarbeitung von Edelstahl Rostfrei CY - Bruchsal, Germany DA - 14.05.2018 KW - Nichtrostender Stahl PY - 2018 AN - OPUS4-45042 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Aktuelle Schadensfälle aus der Trinkwasserinstallation N2 - Zwei typische Probleme aus aktuellen Schadensfällen werden vorgestellt: Zum einen ein falsch eingestellter Werkstoffzustand an einer Kupferlegierung, zum anderen ein Schaden an nichtrostendem Stahl durch Desinfektion T2 - 42. Sitzung des GfKORR Arbeistkreises Schadensuntersuchung CY - Frankfurt a.M., Germany DA - 17.04.2018 KW - Nichtrostender Stahl KW - Messing KW - Korrosion PY - 2018 AN - OPUS4-44711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Le, Quynh Hoa A1 - Bäßler, Ralph A1 - Knauer, S A1 - Kratzig, Andreas A1 - Bettge, Dirk A1 - Kranzmann, Axel T1 - Droplet corrosion of CO2 transport pipeline steels N2 - This work examined the droplet corrosion of CO2 pipeline steels caused by impurities in CO2 supercritical/dense phase at 278 K, simulating the underground transport condition. The wetting properties of carbon steels (X52 and X70) as well as martensitic steel UNS S41500, and superaustenite UNS N08031 were studied by contact angle measurement, revealing reactive wetting behavior of carbon steels. Exposure tests with CO2 saturated water droplet on steel surface showed that the impurities (220 ppmv SO2 and 6700 ppmv O2) diffused into the droplet and then reacted with metal coupons in supercritical/dense phase condition, forming the corrosion product instantly during pumping process. Due to the active wetting behavior, the carbon steels suffered from heavily attack, while negligible corrosion product was observed in cases of martensitic steel UNS S41500 and superaustenite UNS 08031 coupons. Condensation experiments that were carried out on fresh polished coupons in CO2 with 1200 ppmv H2O showed that the formation and aggregation of droplet is dependent on the presence of impurities. Without SO2 and O2, the same concentration of H2O did not cause observable corrosion process after a week of exposure. With 220 ppmv SO2 and 6700 ppmv O2 even low water concentration (5-30 ppmv) still resulted in heterogeneous nucleation and subsequent growth of droplets, leading to corrosive process on carbon steel surface albeit to a lesser extent. T2 - CORROSION 2018 CY - Phoenix, AZ, USA DA - 15.04.2018 KW - CCUS KW - Supercritical/dense phase CO2 KW - Carbon steels KW - Martensitic steel KW - Superaustenite steel KW - Droplet corrosion PY - 2018 SP - Paper 10845, 1 EP - 11 PB - NACE International Publications Division CY - Houston, Texas, USA AN - OPUS4-44798 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Release of heavy metals from alloys used in drinking water: How to test and evaluate materials N2 - Die Methodik und die Grundlagen der prüfung von Werkstoffen auf ihre hygienische Eignung für die Verwendung im Trinkwasser wird dargestellt und am Beispiel der metallenen Werkstoffe explizit ausgeführt T2 - Kormat 2018 CY - Zagreb, Croatia DA - 25.04.2018 KW - Hygienic assessment KW - Metals KW - Testing PY - 2018 AN - OPUS4-44807 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -