TY - CONF A1 - Wäsche, Rolf A1 - Hartelt, Manfred A1 - Ehrke, Roman ED - Silva Gomes, J. F. ED - Meguid, S. A. T1 - A study on tribological behaviour of a-C:H coatings under lubricated conditions up to 250°C T2 - Proceedings of the 6th International Conference on Mechanics and Materials in Design N2 - The influence of temperature and counterbody material on the tribological properties of a-C:H coatings deposited on Cronidur 30 steel has been investigated in a lubricated ball on disk contact situation with alpha-alumina and silicon nitride as counterbodies. The results show, that the wear volumes of the systems increase exponentially with increasing temperature, for alpha-alumina more than for silicon nitride. Two different wear mechanisms seem to have a major influence: First, the abrasive action due to materials hardness and second, the tribo-oxidation when silicon nitride is counter material. T2 - 6th International Conference on Mechanics and Materials Design CY - P. Delgada/Azores, Portugal DA - 26.07.2015 KW - Diamond like carbon KW - Ceramics KW - Wear KW - Friction KW - Temperature PY - 2015 SP - Paper 5395, 445 EP - 446 AN - OPUS4-37014 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harsha, A. P. A1 - Wäsche, Rolf T1 - Tribological studies on polyetherimide composites sliding against steel under reciprocating conditions T2 - PolyTrib 2016 N2 - The friction and wear properties of polyetherimide composites under dry oscillating sliding condition at room temperature (RT) as well as at elevated temperature (120 °C) was investigated. The polymer specimens were made to oscillate against steel cylinder as a counterpart. The friction and wear properties of PEI and composites were strongly influenced by the temperature. In case of carbon fiber composite abrasive action of carbon fibers has severely damaged the counterpart and resulted in accelerated wear of the composite at RT. Solid lubricants filled (PTFE, MoS2, graphite) along with glass fiber is beneficial in improving the friction and wear performance of the PEI composite at RT, whereas at elevated temperature wear performance was deteriorated. T2 - 2nd International Conference on Polymer Tribology CY - Ljubljana, Slovenia DA - 15.09.2016 KW - Polyetherimide KW - Composites KW - Friction KW - Wear KW - Temperature KW - Oscillating sliding KW - Solid lubricant KW - Fibers PY - 2016 AN - OPUS4-38135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Ehrke, Roman A1 - Woydt, Mathias T1 - Wear of alpha-alumina in hot steam up to 300°C T2 - Progress in Mechanics and Materials in Design N2 - Selfmated alpha-alumina sliding couples have been investigated under oscillating sliding at 100 N load in different humidity conditions in air as in hot steam up to temperatures of 300°C and ambient pressures up to 4 bar. T2 - 7th International Conference on Mechanics and Materials in Design CY - Albufeira, Portugal DA - 11.06.2017 KW - Apha-alumina KW - Wear KW - Steam KW - Temperature KW - Abrasion PY - 2017 SN - 978-989-98832-6-0 SP - 265 EP - 266 PB - LusoImpress S.A. CY - Avintes, Portugal AN - OPUS4-41128 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -