TY - JOUR A1 - Charlesworth, M. A1 - Lampronti, G. A1 - Belenguer, Ana M. A1 - Day, S. A1 - Saunders, L. A1 - Connolly, E. A1 - Midgley, P. A1 - Michalchuk, Adam A. L. T1 - Influence of Liquid on Crystallite Size Evolution During Ball Milling N2 - Liquid assisted grinding (LAG) is a commonly used mechanochemical procedure, especially for polymorphic conversions. However, it is not understood what effect liquid additives actually play in driving mechanochemical polymorphic conversions, precluding our ability to control solid form transformations under mechanochemical conditions. We here present a time-resolved in situ (TRIS) synchrotron powder Xray diffraction (PXRD) monitoring strategy that can track, with few nm resolution, the evolution of crystalline size under liquid assisted ball milling conditions. We apply this method to investigate the influence of liquid additives on the polymorphic conversion of the 1:1 co-crystal of theophylline and benzamide, with particular focus on the role that crystallite size plays in driving ball milling induced polymorphic transformations. We find that the crystallite sizes achieved by ball milling are highly sensitive to the amount of liquid added to the reaction mixture. Liquid additives generally lead to larger crystallite sizes as compared with neat grinding protocol, with our findings indicating that crystallite size reduction is not the main factor that causes polymorph conversion under liquid assisted grinding conditions. The data presented clearly indicates the presence of an induction period before phase transformation begins with a minimum value in the crystallite size of the starting polymorph indicating the end of that induction period. KW - Ball milling KW - In situ diffraction KW - Phase transformation KW - Liquid assisted grinding KW - Crystallite size PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656783 DO - https://doi.org/10.1021/acs.cgd.5c01662 SN - 1528-7483 SP - 1 EP - 7 PB - American Chemical Society (ACS) AN - OPUS4-65678 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Yang, Chunliang A1 - Yang, Fan A1 - Meng, Xiangmeng A1 - Putra, Stephen Nugraha A1 - Bachmann, Marcel A1 - Rethmeier, Michael T1 - Phase-field simulation of the dendrite fragmentation by electromagnetic stirring in AA5754 aluminum alloy laser beam welding N2 - A phase-field model including magnetic field induced dendrite fragmentation was established and applied to the cases with different initial crystal nuclear positions for AA5754 aluminum alloy electromagnetic laser beam welding. Compare the calculated results that include dendrite fragmentation caused by the thermal electromagnetic Lorentz force with the results that consider only the thermal electromagnetic Lorentz force, without fragmentation, at the characteristic time instants. Both in the early and late stages, the small fragmentation at the dendrite tip promotes the number of higher-order branches and their growth, especially in the direction perpendicular to the solidification. The later stage fragmentation has the possibility of breaking one grain into several, which verifies the possibility of grain refinement caused by dendrite fragmentation. The fracture surface caused by fragmentation also makes more solid-liquid interfaces and their growth. In addition, the cases with different initial nuclear positions were compared. The grain growth in the low-temperature zone can be inhibited by the equiaxed grains' fragmentation at the high-temperature area (179.8 μm² and 14.7 % start at the center, 115.4 μm² and 9.4 % start at the high-temperature corner, 134.3 μm² and 10.9 % start at the low-temperature corner), which is another kind of grain refinement by the dendrite fragmentation. This kind of inhibition effect on grain growth in the low-temperature region will be enhanced with the increasing time interval between the two crystal nuclei’ appearance (179.8 μm² and 14.7 % when virtual grains appear at t = 4.3803 s and t = 4.3803 s, 134.3 μm² and 10.9 % at t = 4.0977 s and t = 3.9564 s, and 115.4 μm² and 9.4 % at t = 3.8151 s and t = 3.5325 s). KW - Laser beam welding KW - Electromagnetic KW - Aluminum alloys KW - Phase field method KW - Equiaxed grain KW - Dendrite fragmentation PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656610 DO - https://doi.org/10.1016/j.cwe.2025.100014 SN - 3117-4159 VL - 35 IS - 1 SP - 1 EP - 12 PB - Elsevier B.V. AN - OPUS4-65661 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meng, Xiangmeng A1 - Bachmann, Marcel A1 - Kising, Pascal A1 - Yang, Fan A1 - Rethmeier, Michael T1 - Prediction of weld pool and keyhole geometries in high-power laser beam welding through a physics-informed generative artificial intelligence approach N2 - The weld pool and keyhole geometries are critical characteristics in evaluating the stability of the high-power laser beam welding (LBW) process and determining the resultant weld quality. However, obtaining these data through experimental or numerical methods remains challenging due to the difficulties in experimental measurements and the high computational demands of numerical modelling. This paper presents a physics-informed generative approach for predicting weld pool and keyhole geometries in the LBW process. With the help of a well experimentally validated numerical model considering the underlying physics in the LBW, the geometries of the weld pool and keyhole under various welding conditions are calculated, serving as the dataset of the generative model. A conditional variational autoencoder model is employed to generate realistic 2D weld pool and keyhole geometries from the welding parameters. We utilize a β-variational autoencoder model with the evidence lower bound loss function and include Kullback–Leibler divergence annealing to better optimize model performance and stability during training. The generated results show a good agreement with the ground truth from the numerical simulation. The proposed approach exhibits the potential of physics-informed generative models for a rapid and accurate prediction of the weld pool geometries across a diverse range of process parameters, offering a computationally efficient alternative to full numerical simulations for process optimization and control in laser beam welding processes. KW - Laser beam welding KW - Generative artificial intelligence KW - Machine learning KW - Numerical simulation KW - Weld pool KW - Keyhole dynamics PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656621 DO - https://doi.org/10.2351/7.0001862 SN - 1042-346X VL - 38 IS - 1 SP - 1 EP - 8 PB - Laser Institute of America AN - OPUS4-65662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - El Abbassi, Abdelouahad A1 - Krenzer, Julius A1 - Petrov, Eugene P. A1 - Biesen, Lukas A1 - Vasylyeva, Vera A1 - Merzenich, Sarah A1 - Resch-Genger, Ute A1 - Müller, Thomas J. J. T1 - Aroyl-S,N-ketene acetal-triarylamine bichromophores – intramolecular energy transfer and dual emission upon induced aggregation and encapsulation N2 - Aroyl-S,N-ketene acetal-based bichromophores are synthesized by a catalytic aryl amination and their photophysics are studied in the solid state, in ethanol–water mixtures inducing aggregation, and after encapsulation in polystyrene nanoparticles. The dye substitution pattern controls aggregation-induced emission and intramolecular energy transfer efficiency, resulting in single-band or dual fluorescence and a strong increase in fluorescence quantum yield upon particle encapsulation. KW - Fluorescence KW - Dye KW - Aggregation KW - Photophysics KW - Enhancement KW - White light emission KW - Energy transfer KW - Quantum yield PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656700 DO - https://doi.org/10.1039/d5ra09361a SN - 2046-2069 VL - 16 IS - 11 SP - 10255 EP - 10260 PB - Royal Society of Chemistry (RSC) AN - OPUS4-65670 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilberg, Alec T1 - Untersuchung und Kompensation des Size-of-Source Effektes der Thermografie zur Prozessüberwachung in der metallischen additiven Fertigung N2 - Der Einsatz der Thermografie zur Prozessüberwachung in der additiven Fertigung von Metallen ist aktueller Schwerpunkt diverser Forschungsprojekte. Prozessbedingt können im Bauteil Risse, innere Spannungen und sonstige interne Fehlerstellen auftreten, deren Entstehung durch wichtige thermische Größen wie Phasenumwandlungstemperaturen, Abkühlgeschwindigkeiten und thermische Gradienten beeinflusst wird. Um diese Einflüsse zu untersuchen, ist eine möglichst genaue Messung dieser Parameter notwendig. Neben den häufig betrachteten Einflüssen des Emissionsgrades, der Umgebungstemperatur und der atmosphärischen Absorption besteht ein weiterer Einfluss, hervorgerufen durch das optische System. Der Kameraaufbau, das verwendete Objektiv und Teilchen im Strahlengang können zur Beugung, Streuung, Reflektion und Aberration der elektromagnetischen Strahlung führen, wodurch die thermografische Messung verfälscht wird. Dies ist ein in der Pyrometrie intensiv erforschter Effekt und wird, aufgrund der Abhängigkeit zur betrachteten Objektgröße, als Size-of-Source Effekt bezeichnet und in dieser Arbeit untersucht. Im Laser-Pulver-Auftragsschweißen (LPA) wird mittels eines Lasers auf einer Substratplatte ein Schmelzbad erzeugt und durch Einblasen von Metallpulver die lagenweise Fertigung von komplexen Bauteilen ermöglicht. Dabei können, je nach geometrischer Auflösung der Kamera, Größen des Schmelzbades im Bereich weniger Prozente der gesamten Bildfläche auftreten. Aus durchgeführten Referenzmessungen an Schwarzkörperstrahlern kann in der gleichen Größenordnung eine Abweichung der Strahlungswerte im zweistelligen Prozentbereich festgestellt werden. Daher ist in diesem Anwendungsfall der dadurch verursachte Fehler nicht zu vernachlässigen, weshalb auf Basis der Referenzmessungen eine Methode entwickelt wurde, um in Abhängigkeit der Größe des Objektes einen Faktor zur Kompensation des Size-of-Source Effektes zu berechnen. In diesem Beitrag werden erste Ergebnisse dieser im Rahmen des DFG Projektes QT-LPA (Nr. 516965606) durchgeführten Arbeiten präsentiert. T2 - DGZfP Jahrestagung 2025 CY - Berlin, Germany DA - 26.05.2025 KW - SSE KW - Thermografie KW - Size of source Effect PY - 2025 AN - OPUS4-65651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilberg, Alec T1 - Multispektrale Thermografie zur quantitativen Temperaturbestimmung im DED-LB/M Prozess N2 - Additive Fertigungsverfahren bieten konstruktive Freiheiten, die mit konventionellen Herstellungsverfahren nur schwer zu realisieren sind. Durch die Möglichkeit hochkomplexe Bauteile aus Metall fertigen zu können, stellt die additive Fertigung in vielen Industriezweigen eine vielversprechende Fertigungsalternative da. Allerdings treten prozessbedingt hohe Temperaturgradienten und schnelle Phasenumwandlungen auf, die maßgeblich entscheidend für die Mikrostruktur und die Bildung von internen Spannungen, Rissen und weiteren Defekten sind. Diese Effekte wirken sich direkt auf die mechanischen Eigenschaften der gefertigten Bauteile aus und verdeutlichen die Notwendigkeit einer zuverlässigen Bauteilprüfung. Dabei sind nachgelagerte Verfahren in der Regel zeit- und kostenaufwändig, weshalb die Anwendung von in-situ Verfahren zur Qualitätssicherung im Fokus diverser Forschungsprojekte steht. Die Thermografie erlaubt die orts- und zeitaufgelöste Messung der im Prozess auftretenden Temperaturfelder. Allerdings müssen die tatsächlich gemessenen digitalen Sensorwerte mittels geeigneter radiometrischer Modelle in Temperaturen umgewandelt werden. Da diese Modelle in der Regel auf Basis von Messungen an Schwarzkörperstrahlern kalibriert werden, kann dieses Vorgehen nur zufriedenstellende Werte liefern, sofern der Emissionsgrad des zu messenden Objektes bekannt ist. Während in statischen Anwendungen häufig ein konstanter Materialreferenzwert hinreichend befriedigende Ergebnisse liefert, ist man in der additiven Fertigung mit dem Problem konfrontiert, dass der Emissionsgrad lokal in kürzester Zeit starke Änderungen durchläuft. Beeinflusst wird dieser Effekt unter anderem durch Temperatur, Phasenzustand und Oberflächenzustand. Das hier vorgestellte Verfahren nutzt Referenzmessungen des Emissionsgrades in Abhängigkeit von Temperatur, Winkel und Phasenzustand, um in einem DED-LB/M-Prozess (auch Laser-Pulver-Auftragschweißen, LPA) sowohl den Emissionsgrad als auch die tatsächliche Temperatur orts- und zeitaufgelöst zu bestimmen. Grundlage hierfür sind multispektrale thermografische Messungen, bei denen (quasi-) synchron in acht unterschiedlichen Wellenlängenbereichen gemessen wird. In diesem Beitrag werden Ergebnisse der im Rahmen des DFG-Projektes QT-LPA (Nr. 516965606) durchgeführten Arbeiten präsentiert. T2 - Thermo25 CY - Garching bei München, Germany DA - 11.11.2025 KW - Thermografie KW - TES KW - Multispektral KW - DED-LB/M KW - Laserpulverauftragschweißen PY - 2025 AN - OPUS4-65652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ziegler, Mathias A1 - Strobach, L. T1 - Infrarotreflektographie und Blitzthermographie zur Sichtbarmachung von historischen Farbschichten am Flugzeug Bücker Bü 181 Bestmann N2 - Die Geschichte eines Flugzeuges ist häufig von unterschiedlichen Nutzungsphasen geprägt. Zum Beispiel ist der Wechsel des Eigentümers eines Flugzeuges häufig mit umfassenden Veränderungen der Farbgebung und Kennzeichnung verbunden. Wenn ein Flugzeug in die Sammlung eines Museums aufgenommen wird, zeigt es entweder den letzten Einsatzzustand oder andere zu späteren Zeiten durchgeführte Reparaturen auf seiner Oberfläche. Oft befinden sich unterhalb dieser letzten äußeren Schicht, ältere Spuren der Nutzung. Um diese verdeckt liegenden Lackierungen sichtbar zu machen, können die Verfahren der Infrarotreflektographie und der aktiven Thermographie eingesetzt werden. Die Infrarotreflektographie wird häufig in der Gemälderestaurierung eingesetzt, um zum Beispiel Vorzeichnungen sichtbar zu machen. Die aus der industriellen zerstörungsfreien Prüfung bekannten Verfahren der aktiven Thermographie fanden bisher überwiegend im Bereich der Bauwerksuntersuchungen Anwendung. Erste Ergebnisse zu Farbuntersuchungen an historischen Flugzeugen mit den beiden Verfahren fanden am Deutschen Museum München in Zusammenarbeit mit der TU-München statt. Ein Projekt der HTW-Berlin mit der Bundesanstalt für Materialforschung und –prüfung (BAM) und dem Militärhistorischen Museum Flugplatz Berlin-Gatow greift diese Anwendungsidee auf und vergleicht beide Verfahren. Am Beispiel des Flugzeuges Bücker Bü 181 Bestmann können die Möglichkeiten, Grenzen und Potentiale der Technologien zum gegenwärtigen Entwicklungsstand verdeutlicht werden. T2 - Material Truth CY - Magdeburg, Germany DA - 04.03.2026 KW - Aktive Thermographie KW - Flugzeuggeschichte KW - Zerstörungsfreie Prüfung (ZfP) KW - Infrarotreflektographie PY - 2026 AN - OPUS4-65658 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Quantitative Auswertemöglichkeiten bei der spektralen Bestrahlung – Berechnung des Wirkungsspektrums N2 - Für die Bewertung des Wellenlängeneinflusses auf die Alterungsvorgänge bei der Bestrahlung UV- oder lichtempfindlicher Materialien kann die Methode der spektralen Bestrahlung angewendet werden. Im Prinzip wird dabei das linear dispergierte Spektrum einer Strahlenquelle mit kontinuierlichem Spektrum (z.B. Xe-Lampe) auf eine Probenoberfläche abgebildet, so dass Ort einer Materialänderung und Wellenlänge der Bestrahlung einander zugeordnet werden können. Nachfolgende lokal-auflösende Analysemethoden ermitteln eine Eigenschaftsänderung an einem spezifischen Ort der Probe, aus dem sich dann die Bestrahlungswellenlänge ergibt. Der verwendete Aufbau wird beschrieben. Es wird an einem ausgewählten Beispiel gezeigt, wie durch geeignete Anbindung eines Messsystems zur Bestimmung der spektralen Bestrahlungsstärke und ortsaufgelöste Messungen der Eigenschaftsänderungen eine quantitative Auswertung realisiert werden kann. Der Einfluss nichtlinearer Alterungsverläufe wird diskutiert. Grenzen der Methode werden aufgezeigt und Erweiterungsmöglichkeiten dargestellt. T2 - 46. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 22.03.2017 KW - UV-Bestrahlung PY - 2017 AN - OPUS4-42577 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Geburtig, Anja A1 - Manier, G. A1 - Cäsar, J. A1 - Herlyn, J. A1 - Hülsmann, Ph. A1 - Köhl, M. A1 - Reichert, Th. A1 - Ruoss, H. A1 - Rüther, N. A1 - Schönlein, A. T1 - Wasser und Materialeigenschaften N2 - In der Gesellschaft für Umweltsimulation GUS e.V. erarbeiten Fachleute aus Wissenschaft und Industrie in freiwilliger Selbstverantwortung Leitfäden und Bücher zur, Umweltsimulation und zur Wirkungssimulation von Umwelteinflüssen. Diese beschreiben den Stand der Technik bzw. Stand der Wissenschaft und dienen als Anleitung für Umweltingenieure und Personen, die sich in die Arbeitsgebiete Produktqualifikation und Umweltsimulation einarbeiten und einiesen wollen. Folgende Themenschwerpunkte werden in diesem Leitfaden behandelt: Wasser und seine Eigenschaften, Phasenübergänge, Transportvorgänge, Änderung von Materialeigenschaften durch Wasser, Messmethoden. KW - Wasser KW - Materialien PY - 2019 SN - 978-3-9818507-4-1 N1 - Belegexemplar liegt bei Frau Geburtig. SP - 1 EP - 445 PB - Stober GmbH CY - Eggenstein AN - OPUS4-48325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Engelking, Lorenz A1 - Eissel, A. A1 - Madia, Mauro A1 - Schröpfer, Dirk A1 - Treutler, K. A1 - Kruse, Julius A1 - Kannengießer, Thomas A1 - Wesling, V. T1 - Influence of ultrasonic-assisted milling on surface integrity of additively manufactured components using MSG processes N2 - Additive manufacturing (AM) is increasingly used for producing complex metallic components. Subsequent machining is essential to achieve final geometries and surface conditions. The resulting surface integrity, particularly the near-surface residual stress state, plays a crucial role in component performance and fatigue life. This study investigates the potential of ultrasonic-assisted milling (USAM), a hybrid machining process, to improve surface integrity and machinability compared to conventional milling (CM). Three materials were investigated, two difficult-to-cut materials CoCr26Ni9Mo5W and FeNi36 and a low-alloy steel S355J2C. The CoCr26Ni9Mo5W and FeNi36 were additively manufactured via Directed Energy Deposition (DED)-Arc and then machined with varying cutting speeds and feed rates within a Design of Experiments. USAM exhibited enhanced machinability and surface integrity, particularly at low cutting speeds, by reducing cutting forces up to 40% and shifting near-surface residual stresses from tensile to compressive. For S355J2C, USAM reduced cutting forces by approximately 45% and induced near-surface compressive residual stresses up to approximately −700 MPa. Rotating bending tests (DIN50100) show that USAM increases the technical fatigue limit from 307 MPa (CM) to 341 MPa (USAM), i.e., by ∼11%. These findings highlight the advantages of ultrasonic assistance in post-AM machining, offering enhanced fatigue performance and surface quality for various metallic materials. T2 - 4th International Conference on Advanced Joining Processes 2025 CY - Coimbra, Portugal DA - 16.10.2025 KW - Ultrasonic-assisted milling KW - Residual stress KW - Surface integrity PY - 2026 DO - https://doi.org/10.1177/14644207261416395 SP - 1 EP - 12 PB - Sage Journals AN - OPUS4-65682 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jesus, Vinicius D. A1 - Merizio, Leonnam G. A1 - Galleani, Gustavo A1 - Raffy, Guillaume A1 - Carpentier, Mathis A1 - Petit, Yannick A1 - Cardinal, Thierry A1 - de Camargo, Andrea S. S. T1 - Energy transfer from Ag species to Nd 3+ in Ga–fluoride–phosphate glasses: near-infrared emission enhancement via controlled heat treatment and femtosecond laser inscription N2 - Gallium fluoride–phosphate glasses are promising materials with wide optical transmission window, high volumetric density, and the ability to accommodate high concentrations of rare earth dopant ions within a tailored fluoride-rich coordination environment, resulting in high emission cross sections. In this work, the compositional system 25Ga(PO3)3–20ZnF2–30BaF2–(25–x–y)SrF2–xAgNO3–yNdF3 (x = 0–10 mol%, y = 0 or 1 mol%) was studied to understand how silver species affect the near-infrared (NIR) emission of Nd3+ ions, when the glasses are subjected to controlled heat treatment and to femtosecond direct laser writing (DLW). The glasses were obtained via the melt-quenching technique and characterized by DSC, XRD, UV-Vis-NIR absorption, and PL spectroscopy. The as-prepared glasses show broad UV-Vis excitation and emission bands arising from the coexistence of Ag+ ions and ionic Ag pairs. In samples with 10 mol% Ag+, brownish coloration and modified emission profiles indicated Ag nanoparticle formation at the surface. Heat treatment promoted the conversion of isolated Ag+ into ionic pairs, producing broadband emissions tunable by excitation wavelength and Ag+ concentration. In co-doped samples, Nd3+ introduced absorption dips in the Ag-related UV-Vis bands, consistent with energy transfer, which was further confirmed by shortened Ag excited-state lifetimes and increased Nd3+ NIR emission under UVVis excitation. In order to control the spatial distribution and size of Ag aggregates (nanoclusters, NCs) and to increase the energy transfer efficiency to Nd3+, femtosecond direct laser writing (DLW) was employed to co-doped glasses with 3 and 5 mol% Ag+. This approach enabled three-dimensional localized growth of Ag NCs with sub-micron spatial control. In the laser processed regions, the NIR emissions of Nd3+ at 900 and 1060 nm were significantly enhanced, clearly evidencing enhanced energy transfer from the localized laserinduced Ag-NCs to the Nd3+ ions. These findings suggest the possibility of tailoring high optical contrast near-IR emissions in glasses, enabling progress in advanced photonic applications. KW - Neodymium KW - Silver KW - Fluoride phosphate glasses KW - Direct laser writing PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656888 DO - https://doi.org/10.1039/d5ma01430a SN - 2633-5409 SP - 1 EP - 14 PB - Royal Society of Chemistry (RSC) AN - OPUS4-65688 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scharf-Wildenhain, R. A1 - Engelking, Lorenz A1 - Hälsig, A. A1 - Schröpfer, Dirk A1 - Kannengießer, Thomas A1 - Hensel, J. T1 - Influence of build‑up height on residual stresses in additive repair and modification using DED‑Arc with high‑strength filler metals N2 - Directed energy deposition (DED)-Arc is suitable for the hybrid additive manufacturing, modification and repair of large metal components with high deposition rates. Residual stresses and distortion are of central importance when characterizing the manufactured components and the sensitive transition area between additive manufactured (AM) component and semifinished product. Residual stresses caused by the thermal cycles during the manufacturing process can impair the mechanical properties of the manufactured parts and can lead to component failure, especially for high-strength steels. Therefore, understanding and controlling residual stresses, when combining different base and feedstock materials, is critical to improve the quality and efficiency of the hybrid DED-Arc process. This article deals with the influence of the build-up height on the residual stress distribution of additively manufactured components with a selected base and feedstock material from commercial high-strength steels. Using a robot-assisted DED-system and a controlled short arc, AM welding experiments were carried out with close to the application parameters at working temperature (200 °C) and heat input (650 kJ/m). Five hybrid AM specimens (AM wall on upright structural steel plate) were produced using a one bead per layer strategy and selected AM-wall heights between 15 and 300 mm. The influence of the AM build height on the longitudinal residual stress in the whole hybrid AM specimen (in welding direction) was analyzed and discussed. All experiments exhibit comparable stress distributions in the area of the substrate plate up to the heat-affected zone (HAZ) and the transition zone, regardless of the building height. The height significantly influences the residual stress distribution of the deposited AM-component. Tensile residual stresses with a maximum range between 300and 400 MPa were always found in the last approx. 18 component layers (upper 40 mm). This is due to restraint of the shrinking of the top layers by the layers below. The lower layers show homogeneous residual stress distributions characterized by low compressive stresses due to the process-related tempering during the deposition of each layer on top of each other. As a result, the significant difference between the various AM build-up heights of the hybrid AM specimens is the extent (or height) of this tempered zone with low compressive stresses. These correlations contribute to the understanding of residual stress development with increasing structure height or ratio of component heights of substrate semi-finished product and AM component in hybrid additive manufacturing. T2 - 78th IIW Annual Assembly and International Conference CY - Genoa, Italy DA - 22.06.2025 KW - DED-Arc KW - Residual stress KW - Heat control PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656793 DO - https://doi.org/10.1007/s40194-026-02417-y SN - 1878-6669 SP - 1 EP - 12 PB - Spriner AN - OPUS4-65679 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -