TY - JOUR A1 - Häusler, Ines T1 - Volume fraction determination of discretely oriented disc-shaped precipitates in transmission mode T1 - Bestimmung des Volumenanteils von diskret orientierten kreisscheibenförmigen Ausscheidungen im Transmissionsmodus N2 - In der vorliegenden Arbeit wurde eine Formel zur Berechnung des Volumenantei ls dis­ kret orientierter scheibenförmiger Phasen für die Untersuchung im Transmissionsmodus hergeleitet, validiert und mit bereits veröffent­ lichen Formeln verglichen. Bei diesem Ver­ gleich konnte gezeigt werden,dass die in zahl­ reichen Veröffentlichungen benutzte Formel von E. E. Underwood für die Volumenanteils­ bestimmungbeidiskret orientierten Ausschei­ dungsphasen nicht benutzt werden sollte, da sie den Volumenanteil deutlich unterschätzt. Die Ursache liegt in der von E.E. Underwood getroffenen Annahme, dass die kreisförmigen Scheiben regellos angeordnet und nicht aus­ gerichtet sind, was in Al-Legierungen in der Regel nicht der Fall ist. KW - Material KW - TEM KW - Volumenbruchteil KW - Al-Cu-Li-Legierung KW - Ausscheidungen PY - 2017 U6 - https://doi.org/10.3139/147.110471 SN - 0032-678X SN - 2195-8599 VL - 54 IS - 12 SP - 816 EP - 837 PB - Carl Hanser AN - OPUS4-43722 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph T1 - Challenges in corrosion (Book review) N2 - Finally it can be concluded that this book fulfills its aim of being an attempt to present the subject of corrosion in a simple form. It introduces students into the world of corrosion making them familiar with general knowledge and certain kinds of approaches of assessing corrosion. KW - Corrosion KW - Material KW - Cost PY - 2017 U6 - https://doi.org/10.1002/maco.201770044 SN - 1521-4176 VL - 68 IS - 4 SP - 484 EP - 484 PB - WILEY-VCH Verlag GmbH & Co. KgaA CY - Weinheim AN - OPUS4-43697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sameith, Janin T1 - Microbially induced corrosion (MIC) - Bacterial biofilms - the good, the ugly and the bad… N2 - Introduction on BAM developments in the project “Microbially Induced Corrosion” (MIC) for new analytical tool, surface modifications and bacterial biofilm developments in the course of the ICBM-Colloquia at the Institut für Chemie und Biologie des Meeres (ICBM) of the Carl-von-Ossietzky-University in Oldenburg. T2 - ICBM Kolloquium (Carl-von-Ossietzky-Universität) CY - Oldenburg, Germany DA - 25.01.2017 KW - MIC KW - Material PY - 2017 AN - OPUS4-39413 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sameith, Janin T1 - BAM strategies for studies on microbial corrosion - Focus area: Materials - Microbially induced corrosion (MIC) N2 - Presentation of the MIC-project (Microbially Induced Corrosion) within the focus area Materials of the BAM. Strategies, developments and innovations in the area of analytical tools, surface modifications, polymer stability and biofilm-enhanced deteriorations of materials in the context of microbially induced corrosion processes. T2 - Gesellschaft für Korrosion e.V Arbeitskreismeeting: Mikrobielle Materialzerstörung CY - Frankfurt; DECHEMA, Germany DA - 09.02.2017 KW - MIC KW - Material KW - Biodetorioration PY - 2017 AN - OPUS4-39415 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bismarck, Marck A1 - Skrotzki, Birgit A1 - Olbricht, Jürgen T1 - Size effects in miniature specimen creep testing of P91 N2 - The use of miniaturized specimen geometries in mechanical testing allows extracting the sample material directly from critical components of power plants like e.g. headers and pipes. In this way, both the impacts of the manufacture of the component (including all shaping and tempering influences) and of the complex aging/loading/oxidation conditions during Service can be analyzed and representative mechanical properties are obtained. In the present study, example results of a comparative creep and creep rupture study on P91 tempered martensite ferritic Steel, involving Standard and miniature specimens that were all taken from one batch of material, are presented. Cylindrical creep specimens with a minimum gauge length diameter of 3 mm were used, representing the smallest recommended test geometry of ISO 204. The test results of miniature specimens exhibit all characteristic creep features of tempered martensite ferritic steels, and analysis of the stress and temperature dependence of creep results in values that correspond well to literature data for P91. However, direct comparison with large scale specimen data reveals small but systematic variations in minimum creep rates, elongations at fracture and times to rupture. In our contribution, these differences are discussed in the light of literature findings on specimen size influences in other heat resistant alloys. Size effects need to be considered for a correct interpretation of results from miniature specimen creep tests. T2 - 3rd International ECCC Conference CY - Rom, Italy DA - 05.05.2014 KW - Material PY - 2017 SN - 978-88-7484-510-1 SP - 430 EP - 435 PB - Tipography Inail CY - Milan AN - OPUS4-41239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -