TY - RPRT A1 - Beck, Uwe T1 - Abschlussbericht zum BMWi / MNPQ – Verbundprojekt Quo Vadis Qualitätssicherung von Verbundwerkstoffen und Validierung des Zentrifugenversuchs – eines neuartigen Prüfverfahrens zur Bestimmung von Verbundfestigkeiten N2 - Quo Vadis – Kurzdarstellung Im Fokus von Quo Vadis stehen die Qualitätssicherung von Verbundwerkstoffen und die Validierung der Zentrifugentechnologie zur quantitativen Bestimmung von Festigkeitswerten in der Beanspruchung auf Zug als Mehr-Proben-Prüfverfahren unter Verwendung einer analytischen Zentrifuge (nachfolgend als „Adhesion Analyser LUMiFrac®“ bezeichnet). Zu den Festigkeiten, die mit Hilfe des LUMiFrac® unter Verwendung aufgeklebter Prüfstempel bestimmt werden, gehören die Fügefestigkeit (FF) von Klebverbindungen, die Haftfestigkeit (HF) von Beschichtungen sowie die Verbundfestigkeit (VF) von Faserverbundwerkstoffen. Aufbauend auf zwei Funktionsmustern der analytischen Zentrifuge sollen für die genannten Anwendungsszenarien (FF, HF, VF) in Anlehnung an die geltenden Normen DIN EN 15870 „Klebstoffe – Zugprüfung zur Bestimmung der Zugfestigkeit von Stumpfklebungen“ und DIN EN ISO 4624 „Beschichtungsstoffe – Abreißversuch zur Beurteilung der Haftfestigkeit“ geeignete Prüfstrategien und -abläufe sowie zum Klebprozess kompatible Aufnahmen für den Prüfkörperverbund in der Zentrifuge entwickelt werden. Im Ergebnis des Vorhabens soll ein automatisiertes und validiertes Mehr-Proben-Prüfverfahren zur Qualitätssicherung von Verbundfestigkeiten zur Verfügung stehen, welches neben der Hardware auch eine Software für die angepassten Prüfstrategien in Form von SOPs (standard operating procedures) bereitstellt. KW - Zentrifugentechnologie KW - Mehr-Proben-Prüfverfahren KW - Fügefestigkeit KW - Klebverbindungen KW - Haftfestigkeit KW - Beschichtungen KW - Verbundfestigkeit KW - Zugfestigkeit PY - 2015 N1 - Das Dokument unterliegt der Vertraulichkeit und kann nicht zugänglich gemacht werden Projektlaufzeit: 01.05.2012 bis 31.08.2015 The document is subject to confidentiality restrictions and cannot be made accessible Project runtime: 01.05.2012 bis 31.08.2015 SP - 1 EP - 12 AN - OPUS4-50390 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stroh, Julia T1 - High resolution in situ monitoring of the initial cement hydration influenced by organic admixtures N2 - Numerous admixtures are used in the building practice to customize the properties of the cement paste during application. The influences of admixtures on the course of cement hydration and formation of hydrate phases have to be considered. Polycarboxylate ether (PCE) based polymeric superplasticizers (SPs) are known to retard the setting of the cement paste. The extent of the retardation differs depending on the molecular structure of the SP. Additionally, the presence of a stabilizing agent (SA) in the cement paste has a retarding side effect on the setting. The initial cement hydration processes and the detailed mechanisms of the retardation influenced by PCEs, as well as their interactions with particular SAs, are insufficiently understood. Up to now, only the results of phenomenological studies were taken into account to describe this retardation process. A detailed structure analysis monitoring the change of the phase composition during the hydration was never applied. Both SP and SA affect the adsorption of the sulphate ions on the clinker particles, causing changes in the formation of ettringite during the initial hydration, and are therefore a crucial part of the setting process itself. Here, the initial hydration of cement influenced by the interaction of SP and SA was monitored in situ by synchrotron X-ray diffraction. The high time resolution of the measurements allowed a continuous detection of the hydrates formed. The hydration was followed from the starting point of water addition and for couple of hours afterwards. The hydration of the levitated cement pellets containing starch as SA was initialized by adding aqueous solutions of different commercial SPs. Changes in the ettringite formation were detected in comparison to the reference hydration of pure cement. T2 - Early Age Concrete: From the Research Lab to the Construction Site CY - Tomsk, Russia DA - 02.06.2015 KW - Portland cement KW - Initial hydration KW - Superplasticizer KW - Stabilizer KW - Synchrotron XRD PY - 2015 AN - OPUS4-35470 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Richter, Frank A1 - Köppe, Enrico A1 - Daum, Werner T1 - Tracking deformation history in split Hopkinson pressure bar testing N2 - The stress vs. strain curve of materials is affected the rate of imposed straining. Among the methods for dynamic testing the technique known as 'split Hopkinson pressure bar' (SHPB) has evolved into the most widely used one to exert high-speed straining. The theory behind it comprises simple equations to compute stress and strain. The reliability of the strain analysis can be assessed by digital image correlation (DIC). The present results indicate that the visually observed strain is smaller than predicted by theory. T2 - 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics CY - Starý Smokovec, Slovakia DA - 22.09.2015 KW - Split Hopkinson pressure bar (SHPB) KW - Digital image correlation (DIC) KW - Digitale Bildkorrelation (DIC) KW - Dynamic testing KW - Dynamische Tests KW - Stress-strain curve KW - Spannungs-Dehnungs-Kurve PY - 2015 SN - 978-80-554-1094-4 SP - 174 EP - 175 PB - University of Zilina, Slovakia CY - Zilina AN - OPUS4-35656 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Cheng-Chieh T1 - Inverse finite element adjustment of material parameters from integrated analysis of displacement field measurement N2 - The integration of finite element method (FEM) into the least-squares adjustment presented in is further extended for a joint evaluation of an elastostatic model and displacement field measurement. For linear solids which obey the Hooke's law, the material parameters determination from measurements is being examined. T2 - 32nd Danubia-Adria Symposium on advances in experimental mechanics CY - Starý Smokovec, Slovakia DA - 22.09.2016 KW - Integrated analysis KW - Inverse problem KW - Finite element method KW - Least-squares adjustment KW - Model and measurement based analysis PY - 2015 AN - OPUS4-35648 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kronemann, Jens A1 - Hünger, K.-J. T1 - Aggregate reactivity and the efficiency of supplementary cementing materials N2 - The knowledge of dissolution processes of aggregates and supplementary cementing materials (SCMs) in alkaline solutions can help to describe the expansion of concretes caused by alkali-silica reaction (ASR) and the effects to avoid ASR by using SCMs in more details. Therefore, dissolution experiments in alkaline solutions under different pH values and different temperatures were performed using aggregates in the original grain size and SCMs in different ratios. The concentrations of soluble silica and additionally alumina were determined by ICP-OES. The investigations showed that up to now the “best” conditions to explain the damage behavior of concrete structures are a pH value of 13 (e.g. 0.1 M KOH solution) and a temperature of 80 °C. The evaluation bases on the parameter “excess silica” which is calculated from the dissolved silica and alumina of the aggregates and the SCMs. It was demonstrated that SCMs reduce and sometimes stop the dissolution of aggregates. The efficiency of the SCMs depends on their amount and chemical composition. T2 - 13th International conference on recent advances in concrete technology and sustainability issues CY - Ottawa, Canada DA - 14.07.2015 KW - alkali silica reaction KW - aggregate reactivity KW - dissolution of silica and alumina KW - dissolution rate PY - 2015 SN - 978-1-942727-23-1 SP - SP-303-26, 355 EP - 370 AN - OPUS4-35609 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hünger, K.-J. A1 - Kronemann, Jens A1 - Hübert, C. A1 - Scholz, Y. T1 - On the mechanism of ASR inhibition by Si and Al containing SCMs N2 - The use of supplementary cementing materials (SCMs) added to concrete mixtures can avoid the alkali-silica reaction. Such materials have a wide range of composition and therefore the inhibition mechanisms can be very differently. The effectiveness of SCMs which provide silica and alumina into the alkaline solution cannot only be explained by reducing the OH--concentration of the pore solution. From dissolution experiments in potassium hydroxide solutions, an interaction was noted between the aggregate and five SCMs via the alkaline solution. Under specific conditions, no silica is released from the aggregate grains. Mineralogical investigations (XRD, SEM+EDX) of the grain surfaces confirm that quartz is the main source of silica. In the presence of alumina providing SCMs, the quartz dissolution is strongly reduced or even sometimes stopped. On surfaces of grains a very thin layer can be observed which is probably responsible for reduction or stopping of the silica dissolution and therefore for the inhibition of ASR. T2 - 13th International conference on recent advances in concrete technology and sustainability issues CY - Ottawa, Canada DA - 14.07.2015 KW - alkali-silica reaction KW - alkali reactivity KW - solubility KW - supplementary cementing materials KW - surface layer PY - 2015 SP - 437 EP - 451 AN - OPUS4-35612 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Jörg T1 - Herausforderungen der Femtosekunden-Technologie an den Laserschutz N2 - Die Verleihung des Deutschen Zukunftspreises an ein Team zum Thema "Ultrakurzpulslaser für die industrielle Massenfertigung - Produzieren mit Lichtblitzen" im Jahr 2013 belegt die industrielle Relevanz des Ultrakurzpulslasereinsatzes in der Materialbearbeitung. Zunehmend werden weitere Anwendungen z.B. in der Mess- und Medizintechnik erschlossen. Femtosekunden-Laserpulse weisen prinzipbedingt ein breites Spektrum auf und besitzen bereits bei moderaten Pulsenergien extreme Pulsspitzenleistungen, womit über „konventionelle“ Laserquellen hinausgehende Herausforderungen an den Laserschutz entstehen. Die in entsprechenden Laserschutzbrillen verwendeten Laserschutzfilter müssen eine große spektrale Absorptionsbandbreite aufweisen und dürfen nicht aufschalten, d.h. keine induzierte Transmission zeigen. Im Vortrag soll dargestellt werden, dass Laserschutzfilter auf Glasbasis, die über ein breites Absorptionsspektrum verfügen, einen ausreichenden Schutz gegenüber fs-Laserstrahlung bieten, wohingegen Laserschutzfilter auf Polymerbasis eine induzierte spektrale Transmission bei steigender Energiedichte aufweisen können, was zu einem drastischen Verlust der Schutzfunktion führt. T2 - Symposium Strahlenschutz – Neue Technologien im Laserschutz CY - BIZBw, Mannheim, Germany DA - 17.11.2015 KW - Laserschutz KW - Schutzbrille KW - Ultrakurzpulslaser KW - Glasfilter KW - Polymerfilter PY - 2015 AN - OPUS4-36259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR T1 - Amts- und Mitteilungsblatt, Band 45, Heft 3 T3 - Amts- und Mitteilungsblatt der BAM - 3/2015 PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-354455 SN - 0340-7551 VL - 45 IS - 3 SP - 1 EP - 271 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mull, Birte A1 - Jann, Oliver T1 - Biozidemissionen aus Materialien in die Luft N2 - Die meisten organischen Biozide gehören zu der Gruppe der schwerflüchtigen organischen Verbindungen (SVOC – semi volatile organic compounds). Zu den klassischen Bioziden zählen u.a. Lindan, Pentachlorphenol PCP) und Dichlordiphenyltrichlorethan (DDT) und zu den neueren u.a. Dichlofluanid, Tebuconazol und Permethrin. Biozide kamen in Museen vor allem in den 50er und 60er Jahren zum Schutz der Exponate zum Einsatz,1 wo sie hauptsächlich in Depoträumen zu finden sind, in welchen sie zum akuten und zum präventiven Schutz vor Schadorganismen eingesetzt wurden.2 Im Laufe der Zeit wurde jedoch festgestellt, dass sich der Einsatz von Bioziden negativ auf die menschliche Gesundheit auswirkt und auch zu Schäden an den behandelten Exponaten führen kann. 3 Verschiedene Möglichkeiten der Biozidanalytik und der Einfluss von Senkeneffekten auf die Analytik werden in diesem Beitrag vorgestellt. KW - Biozidanalytik KW - Schwerflüchtige organische Verbindungen KW - Emissionsmesskammer PY - 2015 SP - 12 EP - 14 CY - Berlin AN - OPUS4-35394 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dörfel, Ilona A1 - Steinborn, Gabriele A1 - Langner, Jeanette A1 - Krietsch, Arne A1 - Seeger, Stefan A1 - Österle, Werner A1 - Schmidt, Martin A1 - Bresch, Harald T1 - Dossier on titanium dioxide - Part 1/1 - NM 105 N2 - In November 2007, OECD’s Working Party on Manufactured Nanomaterials (WPMN) launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (hereafter the Testing Programme). The objective was to conduct specific tests, relevant to human health and environmental safety endpoints, on a variety of manufactured nanomaterials (MN). The outcomes of the Testing Programme were intended to assess the applicability of the existing test guidelines1 to nanomaterials, as well as to provide useful information on any intrinsic properties of MNs, which are different from the same bulk material with greater external dimensions. Understanding the properties of NMs is crucial to choose appropriate strategies for hazard identification, risk assessment or risk management measures. The Testing Programme involved delegations from OECD member countries, some non-member economies and other stakeholders. The broad international representation, from a range of delegations enabled the programme to pool expertise and resources without which this programme would not have been possible. KW - Nanomaterial KW - Nanoparticle KW - Sponsorship programme KW - Nano characterization PY - 2015 UR - http://www.oecd.org/env/ehs/nanosafety/dossier-on-silver-nanoparticles-part1-1.htm IS - 54 SP - 27 CY - Paris AN - OPUS4-35430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -