TY - CONF ED - Maiwald, Michael T1 - 11. Kolloquium Prozessanalytik Wien N2 - Themenschwerpunkt des 11. Kolloquiums war „Vom Sensor zur Prozessintelligenz“. Diskutiert wurde damit über die neusten Fortschritte in der Messtechnik und deren Implementierung sowie über neue Aspekte der Modellierung und das Umsetzen, also das Leben des daraus generierten Wissens im Prozess. Das 11. Kolloquium Prozessanalytik in Wien startete mit einem Konferenzvorkurs zum Thema Ressourcenanalytik. Bei der Erschließung, Förderung und Umsetzung von natürlichen Rohstoffen gewinnen analytische Online-Verfahren eine immer größere Bedeutung. Gleichzeitig liegen die Analyte jedoch in sehr heterogenen Matrizes vor, sodass die Ressourcenanalytik ein sehr herausforderndes, für Fachleute damit aber auch sehr spannendes Thema ist. Für diesen interdisziplinären Brückenschlag fanden an den beiden Hauptveranstaltungstagen vier Sessions mit jeweils drei Fachvorträgen und anschließender Diskussion statt: Im ersten Vortragsblock Sensoren – „messen“ wurden beispielhaft neue Messtechniken sowie übergeordnet deren Einbindung in die digitale Welt über Zukunftstrends wie Industrie 4.0 oder die Technologieroadmap Prozess-Sensoren 4.0 beschrieben. Mit Automatisierung – „implementieren“ wurden in einer zweiten Session Herausforderungen aber auch konkrete Lösungswege bei der Implementierung von Messtechnik im industriellen Umfeld aufgezeigt. Die Vortragsreihe Modelle – „erkennen“ widmete sich am zweiten Veranstaltungstag der Fragestellung, wie Messergebnisse in Wissen transferiert werden können, wobei insbesondere entsprechende Erfahrungen aus der Bioprozesstechnik zugänglich gemacht wurden. Ebenfalls am zweiten Tag war schließlich Life-Cycle-Management – „leben“ Titel der „österreichischen Session“ zum Schwerpunktthema des Kolloquiums. In den drei Vorträgen wurde gezeigt, wie einmal generiertes Prozesswissen durch gutes Wissensmanagement und dessen Werkzeuge nicht nur tradiert sondern auch transferiert werden kann. Besondere Berücksichtigung fanden beim diesjährigen Kolloquium auch die fast 40 hochqualitativen Posterbeiträge. Neben den ausgedehnten Postersessions an beiden Veranstaltungstagen erhielten die Autoren in zwei Posterslams jeweils eineinhalb Minuten Zeit, ihre Arbeit vorzustellen und das Fachpublikum zu vertiefenden Gesprächen im Anschluss einzuladen. Damit rückten nicht nur diese wertvollen Beiträge noch mehr ins Zentrum der Aufmerksamkeit, auch das Auditorium hatte so Gelegenheit, die Posterausstellung noch gezielter wahrzunehmen. T2 - 11. Kolloquium Arbeitskreis Prozessanalytik CY - Wien, Austria DA - 30.11.2015 KW - Kolloquium Prozessanalytik KW - Prozessanalytik KW - Tagungsband PY - 2015 SP - 1 EP - 96 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37398 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krome, Fabian A1 - Gravenkamp, Hauke T1 - 3-D Waveguide modeling and simulation using SBFEM T2 - ICSV22 PROCEEDINGS N2 - The modeling of waveguides by means of the Scaled Boundary Finite Element Method (SBFEM) has recently been addressed and is considered an effective procedure for the simulation of ultrasonic guided waves in plates and uniform structures, as well as their interaction with defects. This work presents the extension of the known applications like uniform concrete foundation cylinders to structures with more complex shapes and defects. The main focus is the required modeling of 3-D structures in SBFEM to solve these efficiently. Furthermore the coupling of different models is discussed. This involves models like a mainly uniform foundation cylinder with varying material behavior or geometry in certain areas which has to be modeled in 3-D SBFEM. With the presentation of numerical examples the accuracy and performance of the modeling is discussed and the advantages in improving numerical stability are shown. T2 - ICSV22 CY - Florence, Italy DA - 12.07.2015 KW - Scaled boundary finite element method PY - 2015 SP - 2805 EP - 2810 AN - OPUS4-43416 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF ED - Maiwald, Michael T1 - 9. Interdisziplinäres Doktorandenseminar N2 - Das interdisziplinäre Doktorandenseminar, das unter den Teilnehmerinnen und Teilnehmern mittlerweile als echter Geheimtipp gehandelt wird, startete dieses Mal gleich in medias res mit einem Design-Thinking-Workshop zum Thema "Prozessanalytik für Industrie 4.0". Das Thema ist derzeit in aller Munde, erfährt eine eigene Dynamik und es wird hierzulande kräftig an Roadmaps und White Papers gestrickt. So kam aus Fachkreisen der VDI/GMA und NAMUR der Vorschlag, die Generation der zukünftigen Kolleginnen und Kollegen zu dem Thema zu befragen, die die heute verbrochenen Konzepte zukünftig selber ausbaden müssen. Die Vorträge der nächsten beiden Tage umfassten wieder ein sehr breites und interdisziplinäres Themen-, Methoden- und Anwendungsspektrum. Neben lumineszenten Temperatursensoren in Mikrochipreaktoren, Mikromischer NMR-Detektion und in Arbeitsschutzkleidung integrierte Chemosensorik folgten einige Vorträge zu Verbesserungen und neunen Konzepten von Biosensoren sowie für Immuno-Micorarray-Verfahren. Die ebenfalls diskutierten Identifizierungs- und Quantifizierungsverfahren reichten von der Kokskohle bis zur Arzneitablette. Desweiteren wurde der Bogen von lumineszenten Nanopartikeln zu Kalibrationsstandards für Trübungssonden gespannt. Neben den Erzeugen der Daten ist ein intelligentes Datenmanagement notwendig um die Informationen auch zu verarbeiten und entsprechend dem User zu präsentieren. Die interdisziplinäre Ausrichtung und Vielfalt der verschiedenen Forschungsbereiche spiegelte sich auch in den Postersession wieder. Die Themen umfassten etwa Softsensoren für die Regelung von CHO-Zellkultivierungen, Prozessanalytik für die Reaktivabsorption von CO2 aus industriellen Gasströmen oder Alkoholmarker in menschlichem Haar, um nur einige zu nennen. T2 - 9. Interdisziplinäres Doktorandenseminar CY - Berlin, Germany DA - 22.02.2015 KW - Doktorandentagung KW - Prozess-Sensoren KW - Elektrochemie KW - Chemometrie KW - Prozessanalytik PY - 2015 SN - 978-3-9817267-0-1 SP - 1 EP - 40 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nachtigall, O. A1 - Kusserow, M. A1 - Clerac, R. A1 - Wernsdorfer, W. A1 - Menzel, Michael A1 - Renz, F. A1 - Mrozinski, J. A1 - Spandl, J. T1 - [Fe19] “Super-Lindqvist” Aggregate and Large 3D Interpenetrating Coordination Polymer from Solvothermal Reactions of [Fe2(OtBu)6] with Ethanol JF - Angewandte Chemie - International Edition N2 - The syntheses, crystal structures, and physical properties of [HFe19O14(OEt)30] and {Fe11(OEt)24}1 are reported. [HFe19O14(OEt)30] has an octahedral shape. Its core with a central Fe metal ion surrounded by six m6-oxo ligands is arranged in the rock salt structure. {Fe11(OEt)24}1 is a mixedvalence coordination polymer in which FeIII metal ions form three 3D interpenetrating (10,3)-b nets. The arrangement of the FeIII ions can also be compared to that of Si ions in a-ThSi2. Thus, the described structures are at the interface between molecular and solid-state chemistry. KW - Solvothermal syntheses KW - Coordination polymers KW - Koordinationspolymere KW - Iron KW - Eisen KW - Polyoxometalates KW - Single-molecule magnets KW - Einzelmolekülmagnete PY - 2015 DO - https://doi.org/10.1002/anie.201503647 VL - 54 SP - 10361 EP - 10364 PB - Wiley-VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-35368 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ehlert, Christopher A1 - Kröner, D. A1 - Saalfrank, P. T1 - A combined quantum chemical/molecular dynamics study of X-rayphotoelectron spectra of polyvinyl alcohol using oligomer models JF - Journal of Electron Spectroscopy and Related Phenomena N2 - X-ray photoelectron spectroscopy (XPS) is a powerful tool for probing the local chemical environment ofatoms near surfaces. When applied to soft matter, such as polymers, XPS spectra are frequently shifted andbroadened due to thermal atom motion and by interchain interactions. We present a combined quantummechanical QM/molecular dynamics (MD) simulation of X-ray photoelectron spectra of polyvinyl alcohol(PVA) using oligomer models in order to account for and quantify these effects on the XPS (C1s) signal. Inour study, molecular dynamics at finite temperature were performed with a classical forcefield and by abinitio MD (AIMD) using the Car–Parrinello method. Snapshots along the trajectories represent possibleconformers and/or neighbouring environments, with different C1s ionization potentials for individualC atoms leading to broadened XPS peaks. The latter are determined by Δ-Kohn Sham calculations. Wealso examine the experimental practice of gauging XPS (C1s) signals of alkylic C-atoms in C-containingpolymers to the C1s signal of polyethylene. We find that (i) the experimental XPS (C1s) spectra of PVA (position and width) can be roughly repre-sented by single-strand models, (ii) interchain interactions lead to red-shifts of the XPS peaks by about0.6 eV, and (iii) AIMD simulations match the findings from classical MD semi-quantitatively. Further, (iv)the gauging procedure of XPS (C1s) signals to the values of PE, introduces errors of about 0.5 eV. KW - XPS KW - Quantummechanical molecular dynamics simulation KW - Polyvinyl alcohol PY - 2015 DO - https://doi.org/10.1016/j.elspec.2014.12.007 SN - 0368-2048 VL - 199 SP - 38 EP - 45 PB - Elsevier B.V. AN - OPUS4-39290 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isleyen, A. A1 - Vogl, Jochen A1 - Skundric, N. A1 - Jotanovic, A. A1 - Näykki, T. A1 - Perkola, N. A1 - Horvat, M. A1 - Zon, A. A1 - Bulska, E. A1 - Ochsenkühn-Petropoulou, M. A1 - Can, S. Z. A1 - Bilsel, M. A1 - Hafner, K. A1 - Suljagic, S. A1 - Kovacevic, L. A1 - Jacimovic, R. A1 - Gazevic, L. A1 - Ari, B. A1 - Tunc, M. A1 - Binici, B. A1 - Gökcen, T. A1 - Fotis, T. T1 - A Joint Research Project for the Sustainable Production of Certified Matrix Reference Materials for Environmental Analysis N2 - Reliable analysis of chemical indicators in water, sediment and soil samples for the purpose of environmental pollution assessment poses one of the greatest analytical challenges, having in mind the complexity of sample matrix and low concentrations of pollutants. Organics (pesticides, PAHs, PCBs, etc.) and heavy metals (Hg, Cd, Ni, Pb and As) represent target parameters. Laboratories performing sampling and tests in this field regulated by respective EU directives, need strong support in terms of providing them with appropriate matrix CRMs enabling the process of quality control. NMIs and DIs with proven metrological capabilities for the production and certification of such materials are necessary for the provision of quality data. This project is aiming to develop capacity to produce CRMs for environmental analysis by transferring the theoretical and practical know-how between the partners and combining their skills to focus on environmental CRM production in accordance with ISO Guide 34. Production process includes good manufacturing practices for processing materials, method development and validation for homogeneity, stability and characterisation tests, characterisation of selected analytes together with additional information about matrix constituents, the calculation of individual uncertainties (between units inhomogeneity, long term stability, characterisation) and combination of uncertainties to determine overall uncertainty of the matrix reference materials. Inter laboratory comparison registered as EURAMET project is set as the ultimate project outcome, confirming the partners’ capabilities in applying newly acquired skills. T2 - BERM-14 International Symposium on Biological and Environmental Reference Materials CY - National Harbor, Maryland, USA DA - 12.10.2015 KW - Soil KW - Heavy metal KW - Environment KW - CRM KW - PFOA KW - PFOS PY - 2015 AN - OPUS4-38800 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isleyen, A. A1 - Vogl, Jochen A1 - Skundrić, N. A1 - Jotanović, A. A1 - Näykki, T. A1 - Perkola, N. A1 - Horvat, M. A1 - Zoń, A. A1 - Bulska, E. A1 - Ochsenkühn-Petropoulou, M. A1 - Can, S. Z. A1 - Bilsel, M. A1 - Hafner, K. A1 - Suljagić, S. A1 - Kovačević, L. A1 - Jaćimović, R. A1 - Gažević, L. A1 - Arı, B. A1 - Tunc, M. A1 - Binici, B. A1 - Gökcen, T. A1 - Fotis, T. T1 - A joint research project for the sustainable production of certified matrix reference materials for environmental analysis N2 - This project aims to develop capacity to produce certified reference materials (CRMs) for environmental analysis by transferring know-how between the partners and combining their skills to focus on environmental CRM production. The production process includes good manufacturing practices for processing materials, method development, the validation and application of homogeneity, stability and characterisation tests, the calculation of individual uncertainties (between-unit inhomogeneity, long term stability, characterisation) and combination of uncertainties to determine overall uncertainty of the matrix reference materials. An inter laboratory comparison registered as a EURAMET project is set as the ultimate project outcome, confirming the partners’ capabilities in applying newly acquired skills. T2 - BERM-14 CY - National Harbor, Maryland, USA DA - 11.10.2015 KW - Reference material KW - Priority pollutants KW - Toxic metals KW - PFOS KW - PFOA PY - 2015 AN - OPUS4-45251 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Priebe, Nsesheye Susan A1 - Rogge, A. A1 - Schmidt, W. T1 - A modified cementitious system for sub-Saharan Africa N2 - Supplementary cementitious materials (SCMs) are largely used all over the world. The leading SCMs are fly ash (FA) and slag. However, such materials originate from industries that are not well established in sub-Saharan Africa (SSA). Therefore, it becomes extremely challenging and expensive to build up sustainable cement and concrete. For SSA, agriculture is one of the leading economic sectors. Agricultural by-products such as rice husk ash (RHA), can be a potential binder material beneficial for use in a cementitious system. RHA combined with limestone filler (LSF) is an option that can be practised for rice producing countries in Africa. T2 - PhD Day CY - Berlin, Germany DA - 14.07.2015 KW - Supplementary cementitious materials KW - Rice husk as KW - Cement KW - Concrete KW - Sustainable PY - 2015 N1 - Geburtsname von Priebe, Nsesheye Susan: Msinjili, N. S. - Birth name of Priebe, Nsesheye Susan: Msinjili, N. S. AN - OPUS4-41029 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jin, Z. A1 - Geißler, Daniel A1 - Qiu, X. A1 - Wegner, Karl David A1 - Hildebrandt, N. T1 - A rapid, amplification-free, and sensitive diagnostic assay for single-step multiplexed fluorescence detection of microRNA JF - Angewandte Chemie - International Edition N2 - The importance of microRNA (miRNA) dysregulation for the development and progression of diseases and the discovery of stable miRNAs in peripheral blood have made these short-sequence nucleic acids next-generation biomarkers. Here we present a fully homogeneous multiplexed miRNA FRET assay that combines careful biophotonic design with various RNA hybridization and ligation steps. The single-step, single-temperature, and amplification-free assay provides a unique combination of performance parameters compared to state-of-the-art miRNA detection technologies. Precise multiplexed quantification of miRNA-20a, -20b, and -21 at concentrations between 0.05 and 0.5 nm in a single 150 mL sample and detection limits between 0.2 and 0.9 nm in 7.5 mL serum samples demonstrate the feasibility of both highthroughput and point-of-care clinical diagnostics. KW - Clinical diagnostics KW - FRET KW - MicroRNA KW - Multiplexing KW - Time-gated fluorescence detection PY - 2015 DO - https://doi.org/10.1002/anie.201504887 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 34 SP - 10024 EP - 10029 PB - Wiley-VCH CY - Weinheim AN - OPUS4-44837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Beck, Uwe T1 - Abschlussbericht zum BMWi / MNPQ – Verbundprojekt Quo Vadis Qualitätssicherung von Verbundwerkstoffen und Validierung des Zentrifugenversuchs – eines neuartigen Prüfverfahrens zur Bestimmung von Verbundfestigkeiten N2 - Quo Vadis – Kurzdarstellung Im Fokus von Quo Vadis stehen die Qualitätssicherung von Verbundwerkstoffen und die Validierung der Zentrifugentechnologie zur quantitativen Bestimmung von Festigkeitswerten in der Beanspruchung auf Zug als Mehr-Proben-Prüfverfahren unter Verwendung einer analytischen Zentrifuge (nachfolgend als „Adhesion Analyser LUMiFrac®“ bezeichnet). Zu den Festigkeiten, die mit Hilfe des LUMiFrac® unter Verwendung aufgeklebter Prüfstempel bestimmt werden, gehören die Fügefestigkeit (FF) von Klebverbindungen, die Haftfestigkeit (HF) von Beschichtungen sowie die Verbundfestigkeit (VF) von Faserverbundwerkstoffen. Aufbauend auf zwei Funktionsmustern der analytischen Zentrifuge sollen für die genannten Anwendungsszenarien (FF, HF, VF) in Anlehnung an die geltenden Normen DIN EN 15870 „Klebstoffe – Zugprüfung zur Bestimmung der Zugfestigkeit von Stumpfklebungen“ und DIN EN ISO 4624 „Beschichtungsstoffe – Abreißversuch zur Beurteilung der Haftfestigkeit“ geeignete Prüfstrategien und -abläufe sowie zum Klebprozess kompatible Aufnahmen für den Prüfkörperverbund in der Zentrifuge entwickelt werden. Im Ergebnis des Vorhabens soll ein automatisiertes und validiertes Mehr-Proben-Prüfverfahren zur Qualitätssicherung von Verbundfestigkeiten zur Verfügung stehen, welches neben der Hardware auch eine Software für die angepassten Prüfstrategien in Form von SOPs (standard operating procedures) bereitstellt. KW - Zentrifugentechnologie KW - Mehr-Proben-Prüfverfahren KW - Fügefestigkeit KW - Klebverbindungen KW - Haftfestigkeit KW - Beschichtungen KW - Verbundfestigkeit KW - Zugfestigkeit PY - 2015 N1 - Das Dokument unterliegt der Vertraulichkeit und kann nicht zugänglich gemacht werden Projektlaufzeit: 01.05.2012 bis 31.08.2015 The document is subject to confidentiality restrictions and cannot be made accessible Project runtime: 01.05.2012 bis 31.08.2015 SP - 1 EP - 12 AN - OPUS4-50390 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -