TY - CONF A1 - Gornushkin, Igor B. T1 - Plasma Fundamentals and Diagnostics N2 - This course will provide an introduction to plasma diagnostic techniques. The major focus of the course will be on the discussions of the practical procedures as well as the underlying physical principles for the measurements of plasma fundamental characteristics (e.g., temperatures, thermodynamic properties, and electron number density). Particular emphasis will be placed on inductively coupled plasma–atomic emission spectrometry, but other analytical plasmas will also be used as examples when appropriate. Selected examples on how one can manipulate the operating conditions of the plasma source, based on the results of plasma diagnostic measurements, to improve its performance used for spectrochemical analysis will also be covered. Topics to be covered include thermal equilibrium, line profiles, temperatures, electron densities, excitation processes, micro reactions, pump and probe diagnostics, tomography, temporal and spatial resolution. Basis of plasma computer modeling will be presented. T2 - 2024 Winter Conference on Plasma Spectrochemistry CY - Tucson, Arizona, USA DA - 15.01.2024 KW - Plasma KW - Plasma fundamentals KW - Plasma diagnostics PY - 2024 AN - OPUS4-59430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gornushkin, Igor B. T1 - Laser-Induced Plasma for Spectroscopy and More N2 - An overview of personal experience with laser-induced plasma (LIP) will be given. The combination of LIP with laser-induced fluorescence, atomic absorption, Raman spectroscopy and spatial heterodyne spectroscopy for elemental and isotopic analysis will be discussed. Unusual applications of LIP will be covered, such as LIP-based lasers and LIP-based chemical reactors. T2 - 2024 Winter Conference on Plasma Spectrochemistry CY - Tucson, Arizona, USA DA - 15.01.2024 KW - Laser induced plasma KW - Laser ablation KW - LIP-LIF KW - LIP-AAS PY - 2024 AN - OPUS4-59431 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Sarah T1 - Optimization of surface-functionalized particles for improved antibody digestion N2 - Therapeutic monoclonal antibodies are the fastest-growing group of biological agents which generated a yearly turnover of USD 210 billion in 2022 and whose sales are expected to grow by 10% annually over the next 10 years. With steadily increasing market importance, analytical methods for reliable quantification of therapeutic antibodies also become more and more relevant. Liquid chromatography coupled with tandem mass spectrometry (LC–MS/MS) has become the main technology for antibody quantification. This approach, however, requires enzymatic digestion of the intact protein into peptides, for which a wide range of different protocols exists that often lead to different results depending on the digestion procedure or trypsin variants used. In particular, the amount and type of detergents added for protein unfolding prior to digestion is known to create significant bias in measurement results. The overall goal of the presented project is the application of novel thermostable and surface-functionalized trypsin particles for improved antibody digestion. Specifically, a trypsin-variant described in the literature exhibiting increased activity and thermal stability above 80°C, will be examined. The application of this enzyme should allow to perform digestion at elevated temperatures where the protein is naturally unfolding thereby increasing enzyme accessibility without the need for detergents. Furthermore, we will immobilize the thermostable trypsin onto the surface to further enhance enzyme stability, prevent self-digestion, and enable separation of trypsin from target peptides before LC–MS/MS analysis. As an immobilization platform, cheap and non-porous corundum particles will be used as these show high chemical stability and low levels of interaction of matrix proteins with the functionalized surface. adsorption. In a multidisciplinary collaboration with the SALSA Photonics Lab, we will investigate the characteristics of covalent enzyme binding and unspecific peptide binding using an interface-sensitive analytical tool, vibrational sum-frequency generation (VSFG) spectroscopy. The insights gained will not only lead to new competencies in peptide and enzyme surface analysis using VSFG spectroscopy in SALSA but will also significantly contribute to optimizing antibody quantification. T2 - SALSA STF24 Kick-Off Meeting CY - Berlin, Germany DA - 11.04.2024 KW - Antibody Quantification KW - Vibrational Sum-Frequency Generation Spectroscopy KW - LC-MS/MS KW - Enzyme Immobilisation KW - Corundum PY - 2024 AN - OPUS4-59864 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sunderkötter, Jan T1 - Eurachem - a network and expert forum for young scientists N2 - Eurachem is an international network of national organisations having the objective of establishing a system for the international traceability of chemical measurements and the promotion of good quality practices. It also provides a forum for discussing common problems and exchanging information on quality assurance issues in analytical chemistry. The presentation will explain how Eurachem is organised, the requirements for participation and the opportunities for collaboration and networking. In particular, it will discuss why Eurachem offers an interesting network for young scientists to exchange experiences and further their own education. T2 - Doktorandenseminar der GDCh CY - Mannheim, Germany DA - 31.07.2024 KW - Eurachem KW - Network PY - 2024 AN - OPUS4-60923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Temgoua, Ranil C. T. T1 - Voir les choses sous un autre angle : Comment l’électrochimie analytique aide à révolutionner l'analyse chimique N2 - As part of the "Journées de Chimie Analytique, JCA Dschang 2024", this plenary scientific conference will explore how analytical electrochemistry is fundamentally changing modern chemical analysis methods. We will highlight key innovations such as wearable/handheld sensors, lab-on-a-chip, lab-on-paper, lab-on-a-glove, integrated detection systems with artificial intelligence, and point-of-care (POC) technologies. We will also address the couplings between analytical electrochemistry and various analytical techniques such as mass spectrometry (EC-MS), chromatography (EC-LC), spectroscopy [EC-spectroscopy (UV-VIS, Raman, IR, NMR)], microscopy [EC-microscopy (EM, AFM)], and capillary electrophoresis (EC-CE). These advances enable faster, more accurate, and more accessible analyses, opening new perspectives for research and practical applications in environmental science, food and agriculture, public health, and advanced materials. T2 - Journées de Chimie Analytique 12th Edition CY - Dschang, Cameroon DA - 28.08.2024 KW - Organic Trace Analysis KW - Electrochemistry KW - Mass Spectrometry PY - 2024 AN - OPUS4-61064 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittwer, Philipp T1 - Results of ILC Data Treatment N2 - Results of the interlaboratory comparison study for data treatment were presented. They show, that nearly all participants found all the problems in the data. However, only a few corrected the problems, therefore making it one possible point to focus on in the knowledge sharing program. T2 - AGM POLMO Meeting 2024 CY - Paris, France DA - 21.05.2024 KW - JNP POLMO KW - ILC KW - Ringversuch PY - 2024 AN - OPUS4-60166 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dalgic, Mete-Sungur T1 - Lösemittelfreie Probenpräparation zur Untersuchung von Polymerblends mittels MALDI-TOF MS N2 - Die Probenpräparation ist ein wichtiger Schritt für die Qualität der Massenspektren in MALDI-TOF MS. Es werden Polymerproben, die lösungsmittelbasiert und lösungsmittelfrei präpariert worden sind, verglichen. Dabei werden die Intensitätsverhältnisse von ternären Mischungen von PEG-, PS- und PMMA-Polymeren beachtet. T2 - 28. Kolloquium - Massenspektrometrische Techniken zur Untersuchung synthetischer Polymere CY - Berlin, Germany DA - 14.05.2024 KW - Polymere KW - Massenspektrometrie KW - Probenpräparation PY - 2024 AN - OPUS4-60032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ronen, A. A1 - Panglisch, S. T1 - Detection, Quantification and Treatment of Per and Polyfluoroalkyl substances (PFAS) in Groundwater N2 - The research project focuses on tackling the detection, measurement, and elimination of per- and polyfluoroalkyl substances (PFAS) from polluted groundwater, with a particular emphasis on addressing short (C4-C7) and ultrashort (C1-C3) chain PFAS. Given the widespread use of PFAS in various products, they are commonly found in groundwater near industrial and military sites in Germany and Israel. Moreover, recent regulations limiting the use of long chain PFAS have led industries to shift towards shorter chain alternatives. Hence, our efforts are geared towards refining detection, quantification, and removal methods for short and ultrashort chain PFAS. In terms of detection, ww are developing passive sampling devices capable of collecting and tracking the temporal distribution of PFAS species in groundwater. This will enable us to analyze contaminations in German and Israeli groundwater using cutting-edge analytical techniques. Additionally, contaminated groundwater will undergo a two-stage treatment process aimed at concentrating the relatively low PFAS concentrations using innovative membrane technologies such as closed-circuit reverse osmosis and mixed matrix composite nanofiltration membrane adsorbers. Subsequently, the streams containing higher PFAS concentrations will be treated through coagulation, with the remaining PFAS being adsorbed onto carbonaceous nanomaterials. The outcome of this research will include the creation of advanced tools for detecting, measuring, and eliminating PFAS from polluted groundwater, while also enhancing our understanding of the scope of these contaminations. T2 - German Israeli Water Technology Status Seminar CY - Koblenz, Germany DA - 18.06.2024 KW - Ground water KW - Per- and Polyfluoroalkyl substances (PFAS) KW - Remediation PY - 2024 AN - OPUS4-60328 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Detektion, Quantifizierung und Entfernung von insbesondere ultrakurzkettigen PFAS in Grundwasser N2 - Da PFAS in großem Umfang in einer Vielzahl von Produkten verwendet wurde, sind sie im Grundwasser in der Nähe vieler industrieller und militärischer Anlagen weltweit zu finden. Darüber hinaus führten neue Vorschriften und Beschränkungen für die Verwendung von langkettigen PFAS zu einer vermehrten Produktion kurzkettiger Alternativen. Ultrakurzkettige PFAS (≥C3) können natürliche und anthropogene Barrieren durchdringen und schließlich in Trinkwasserquellen gelangen. Zudem entfernen die meisten gängigen Trinkwasser-aufbereitungsverfahren die ultrakurzkettigen PFAS nicht ausreichend. Im Kooperationsprojekt DEFEAT-PFAS wird daher das Ziel verfolgt, Wissenslücken über Nachweis, Quantifizierung und Entfernung von kurz- (C4-C7) und ultrakurzkettige (C1-C3) PFAS, in kontaminiertem Grundwasser zu schließen. Die israelischen und deutschen Projektpartner entwickeln dafür analytische Methoden and selektive Passivsammler, um das zeitliche Profil von PFAS-Spezies im Grundwasser zu erfassen und überwachen. Darüber hinaus ein zweistufiges Verfahren entwickelt, welches darauf ausgelegt ist, die relativ niedrigen PFAS-Konzentrationen im Grundwasser durch neuartige Membranverfahren, Umkehrosmose im Batchbetrieb mit geschlossenem Kreislauf sowie Verbund-Nanofiltrationsmembranen, zu konzentrieren. Anschließend werden die PFAS angereicherten Konzentrate mittels Koagulation behandelt und das verbleibende PFAS an kohlenstoffhaltigen Nanomaterialien adsorbiert. T2 - Workshop des Netzwerks Perflusan CY - Karlsruhe, Germany DA - 18.06.2024 KW - Grundwasser KW - Per- und Polyfluoroierte Alkylsubstanzen (PFAS) PY - 2024 AN - OPUS4-60334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portesi, Chiara T1 - Metrology for food safety in the circular economy: targeted and screening methods for contaminants in food and recycled packaging N2 - Safeguarding consumers from potential harm caused by food contamination is of paramount importance to ensure food safety. The focus on safety is a central priority for European Commision lawmakers. Furthermore, as outlined in the EU circular economy action plan, the development of a sustainable food system is a critical objective. However, progress towards these goals can sometimes face obstacles, including the risk of eroding consumer confidence in food quality. Factors such as the increased use of recycled and sustainable packaging materials and the growing awareness of emerging contaminants necessitate immediate attention. To ensure a high level of food safety throughout production and distribution, it is crucial to improve and harmonise analytical techniques for contaminant quantification. This constitutes the basis for reliable data and compliance with regulations and for resolving disputes and minimising financial losses within the food industry. The ScreenFood project (June 2024 -May 2027) is funded by the European Metrology Partnership and aims to develop reference methods and reference materials for quantifying contaminants in both food and food packaging, with a specific emphasis on recycled materials. These metrological tools will aid industries and official food control in guaranteeing the delivery of safe food and sustainable packaging while adhering to regulatory requirements. Specific objectives of the project are i. To improve protocols for the quantification of the mineral oil aromatic hydrocarbons (MOAH) fraction and for the quantification of the fraction consisting of substances with three or more aromatic ring systems (3+MOAH); ii. To develop sensitive analytical procedures for detecting and quantifying per- and polyfluoroalkyl substances (PFAS) in selected matrices, in line with EU requirements; iii. To develop traceable and highly accurate reference materials for quality control and quality assurance purposes; iv. to develop screening methods addressing new/existing organic and inorganic contaminants, in virgin and recycled packaging, such as PET, and bio-based and reusable materials; v. To investigate the migration of contaminants from packaging into food simulants, as well as to foster the research in the discovery of Emerging and Novel PFAS through non-targeted screening. The consortium brings together 28 partners from EU metrological institutes, research centres, control laboratories, EU reference laboratories and industries. A large panel of collaborators and stakeholders is supporting the consortium in keeping the project aligned with EU and industrial priorities.  T2 - 11th International Symposium on RECENT ADVANCES IN FOOD ANALYSIS (RAFA) CY - Prague, Czech Republic DA - 05.11.2024 KW - Per- and Polyfluoroalkyl Substances (PFAS) KW - MOSH/MOAH KW - EU Project KW - Food KW - Food Contact Material (FCM) KW - ScreenFood PY - 2024 AN - OPUS4-62185 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - PFAS analysis by fluorine K-edge XANES spectroscopy and thermal and mechanochemical treatment N2 - Per- and polyfluoroalkyl substances (PFAS) are a large group of more than 12,000 organofluorine surfactants. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. . Current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Both approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Furthermore, the contaminated adsorbants have to be safely thermal treated for recovery. Hence, there is a great demand for innovative developments, dealing with new strategies of tackling the PFAS problem. Previously, mechanochemical treatment of polychlorinated organic compounds in soils showed an efficient dechlorination. Thus, we investigated mechanochemical treatment of PFAS contaminated soils with various additives in a ball mill. T2 - SEMICON CY - Tokyo, Japan DA - 12.12.2024 KW - Mechanochemical treatment KW - Per- and Polyfluoroalkyl substances (PFAS) KW - XANES spectroscopy KW - Thermal treatment PY - 2024 AN - OPUS4-62183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cakir, Cafer Tufan T1 - Enhancing the Efficiency and Accessibility of Grazing Exit X-ray Absorption Spectroscopy for Corrosion and Layered Materials Analysis N2 - In the field of materials science, there is a critical need for efficient and effective characterization techniques, especially in the investigation of corrosion processes of compositionally complex alloys (CCAs) or the analysis of layered structures. This talk presents an advanced approach that combines grazing-exit X-ray absorption near-edge structure spectroscopy (GE-XANES) with Bayesian optimization (BO) to significantly improve the efficiency of data acquisition while retaining the depth-resolved, element-specific analysis capabilities that are critical for studying these materials under ambient conditions. Using a non-destructive, scan-free GE-XANES setup coupled with a pnCCD detector and grazing exit X-ray fluorescence spectroscopy (GE-XRF) geometry, our method enables precise analysis at sub-micrometer depths without the need for high vacuum environments or extensive sample preparation. The integration of BO reduces experimental time by a factor of 50, overcoming the practical limitations of conventional GE-XANES and increasing its applicability in the study of surface catalysis and corrosion processes. We validate this optimized approach through comparative studies on a CrCoNi alloy and a reference layered sample, demonstrating its potential to revolutionize materials analysis by increasing both efficiency and accessibility. T2 - Gesellschaft Deutscher Chemiker (GDCh) CY - Clausthal-Zellerfeld, Germany DA - 20.06.2024 KW - GEXRF KW - GEXANE KW - ML PY - 2024 AN - OPUS4-61788 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zöllner, Moritz T1 - Thermal decomposition of dolomite: Raman spectroscopy as a thermometric tool for the analysis of carbonates in mortar binders. N2 - The reconstruction of the thermal history of minerals is an on-going challenge in the study of anthropogenic materials, e.g., ceramics and mortar binders. For millennia carbonate rocks have been used as the starting material, though the exact manufacturing procedures are often unknown. Preparatory parameters such as firing temperature, heating and cooling rates, soaking time, and kiln atmosphere greatly influence the chemical and structural properties of the resulting products. Analysis of replicas produced under well-defined laboratory conditions help identify indicators for such process parameters and therefore provide valuable insights into historical production workflows. Raman micro-spectroscopy is a valuable method here because of its high sensitivity for crystal-chemical alterations coupled with a high spatial resolution. Previous studies on pyrogenic anhydrite were able to distinguish between gypsum materials that were heated at different temperatures between 400 – 900 °C [1, 2]. The results of thermal experiments with natural dolomite powder between 500 – 900 °C are presented, evaluating the thermal decomposition of dolomite and the consequent formation of calcium carbonate. Raman measurements were performed at room temperature on calcinated samples, as well as subsequently hydrated and re-carbonated samples. A peak-fitting routine using python scripts was employed to extract the peak positions and the full width at half maximum (FWHM) values of the ν1-, ν4- and L-bands of the carbonates. The results reveal the formation of Mg-calcite from dolomite at 700 – 750 °C and the formation of Mg-free calcite after calcination above 750 °C and subsequent hydration and re-carbonation. The findings from the thermal experiments are compared with Raman-microscopy mappings on medieval and reenacted mortars containing dolomite. Mg-calcite with comparable peak position and FWHM values have been successfully identified, proving Raman spectroscopy to be a suitable tool for elucidating the manufacturing procedures of anthropogenic materials. T2 - European Mineralogical Conference 2024 CY - Dublin, Ireland DA - 18.08.2024 KW - Raman spectroscopy KW - Dolomite KW - Mineral thermometry PY - 2024 AN - OPUS4-61975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zöllner, Moritz T1 - Thermal decomposition of dolomite: Raman spectroscopy as a thermometric tool for the analysis of carbonates in mortar binders. N2 - High-spectral resolution Raman spectroscopy is a powerful tool for the chemical and structural analysis in material sciences. Beyond its usage for the qualitative identification of minerals, Raman spectroscopy has been applied for the quantitative characterisation of chemical phases. The precise measurement of Raman peak position and band width values allows for an empirical differentiation of chemically similar phases and thus provides valuable insights to the structural properties of a material. In the field of archaeometry, the crystal structure of minerals can be used to elucidate the preparatory parameters of historical samples, such as the firing temperature. Comparison of historical materials with replicas produced under well-defined laboratory conditions help identify indicators for such process parameters. Previous Raman studies on pyrogenic anhydrite were able to distinguish between gypsum materials that were heated at different temperatures between 400–900 °C [1–3]. The results of thermal experiments with natural dolomite powder between 500–900 °C are presented, evaluating the thermal decomposition of dolomite and the consequent formation of calcium carbonate. Raman measurements were performed with excitation at 532 nm and 1800 mm-1 grating at room temperature on calcinated samples, as well as subsequently hydrated and re-carbonated samples. These high-resolution conditions are necessary to resolve the individual spectral contributions of different calcium/magnesium carbonate species. However, this sensitivity does not come without potential pitfalls. While the usage of micro-Raman spectroscopy with high spectral resolution shows great promise for evaluating minor shifts in peak positions and band widths, several technical aspects must be considered. For example, great care must be taken to exclude the thermal impact of the highly focused Raman laser on the sample. Similarly, exact standard operating procedures have to be followed to circumvent mechanical hysteresis in the alignment of the spectrographs’ grating. The influence of these two effects is presented and effective countermeasures are introduced to avoid resulting systematic errors. Statistical reliability and chemical imaging both rely on the individual analysis of thousands of Raman spectra. Thus, besides the spectral acquisition, also highly automated data analysis must be applied. Therefore, a peak-fitting routine using python scripts was employed to extract the peak positions and the full width at half maximum (FWHM) values of the ν1-, ν4- and L-bands of the carbonates. The results reveal the formation of Mg-calcite from dolomite at 700–750 °C and the formation of Mg-free calcite after calcination above 750 °C and subsequent hydration and re-carbonation (Fig. 1a). The findings from the thermal experiments are compared with Raman-microscopy mappings on medieval and reenacted mortars containing dolomite. Mg-calcite with comparable peak position and FWHM values have been successfully identified (Fig. 1b), proving Raman spectroscopy to be a suitable tool for elucidating the manufacturing procedures of anthropogenic materials. T2 - 16th GeoRAMAN Conference CY - Rhodes, Greece DA - 24.09.2024 KW - Raman spectroscopy KW - Dolomite KW - Mineral thermometry PY - 2024 AN - OPUS4-61977 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zöllner, Moritz T1 - Thermal decomposition of dolomite: Raman spectroscopy as a thermometric tool for the analysis of carbonates in mortar binders N2 - The reconstruction of the thermal history of minerals is an on-going challenge in the study of anthropogenic materials, e.g., ceramics and mortar binders. For millennia carbonate rocks have been used as the starting material, though the exact manufacturing procedures are often unknown. Preparatory parameters such as firing temperature, heating and cooling rates, soaking time, and kiln atmosphere greatly influence the chemical and structural properties of the resulting products. Analysis of replicas produced under well-defined laboratory conditions help identify indicators for such process parameters and therefore provide valuable insights into historical production workflows. Raman micro-spectroscopy is a valuable method here because of its high sensitivity for crystal-chemical alterations coupled with a high spatial resolution. Previous studies on pyrogenic anhydrite were able to distinguish between gypsum materials that were heated at different temperatures between 400–900 °C [1-3]. The results of thermal experiments with natural dolomite powder between 500–900 °C are presented, evaluating the thermal decomposition of dolomite and the consequent formation of calcium carbonate. Raman measurements were performed at room temperature on calcinated samples, as well as subsequently hydrated and re-carbonated samples. Raman band positions and the full width at half maximum (FWHM) values of the ν1-, ν4- and L-bands of the carbonates are extracted and reveal the formation of Mg-calcite from dolomite at 700–750 °C and the formation of Mg-free calcite after calcination above 750 °C and subsequent hydration and re-carbonation. The findings from the thermal experiments are compared with Raman-microscopy mappings on medieval and reenacted mortars containing dolomite. Mg-calcite with comparable peak position and FWHM values have been successfully identified, proving Raman spectroscopy to be a suitable tool for elucidating the manufacturing procedures of anthropogenic materials. T2 - SciX 2024 CY - Raleigh, NC, USA DA - 20.10.2024 KW - Raman spectroscopy KW - Dolomite KW - Mineral thermometry PY - 2024 AN - OPUS4-61978 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dalichow, Dirk T1 - Laser Induced Breakdown Spectroscopy (LIBS) for the chemical investigation of concrete- Status of practical application and regulations in Germany N2 - The assessment and maintenance of reinforced concrete structures depends largely on knowledge of the chloride content and chloride ingress. Common methods are the wet chemical analysis of drill dust or powder from ground drill core segments. However, due to the homogenization process, this approach often fails to detect locally elevated chloride levels. A state-of-the-art alternative method is laser-induced breakdown spectroscopy (LIBS), which offers rapid analysis and the possibility of detecting several chemical elements simultaneously. This method is particularly characterized by its ability to measure light elements such as hydrogen, carbon or sodium. The spatial resolution of LIBS is usually 0.25 mm but can be increased to 0.1 mm or less if required. BARG, is the first commercial building materials laboratory in Germany to use LIBS in practice. The current LIBS setup enables rapid, spatial quantification of the chlorine content and at the same time the creation of element maps that visually represent the distribution of essential elements in the concrete. This method can be used to localize areas of elevated chlorine content, particularly in cracks or near reinforcing bars. With the ability to analyze several elements simultaneously, LIBS can determine measurement points associated with the cement phase and, taking into account the water content, relate the measured contents directly to the cement mass. The detailed ingress profiles determined by LIBS provide essential data for the estimation of accurate chlorine diffusion coefficients, which are crucial for probabilistic lifetime predictions. The estimation of the carbon distribution enables the localization of carbonated regions and their effect on the chloride distribution. The possibility of quantitatively determining the sulfur distribution also indicates areas that are affected by a possible sulfate attack. The presentation uses practical examples to demonstrate the possibilities and advantages of the LIBS method. In addition, the newly published leaflet B14 of the German Society for Non-Destructive Testing (DGZfP) will be presented, which describes the use of LIBS for the quantitative determination of chloride content in concrete. T2 - ICCRRR 2024 CY - Cape Town, South Africa DA - 04.11.2024 KW - Concrete KW - Chloride KW - Corrosion KW - Repair KW - Maintenance PY - 2024 AN - OPUS4-62481 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Soruco Aloisio, Ricardo A1 - Klaus, Christian T1 - Auf dem Weg zu einer digitalen Qualitätsinfrastruktur - Use Case Wasserstofftankstelle N2 - Im Rahmen der von der BAM und anderen Partnern ins Leben gerufenen Initiative „Digitale Qualitätsinfrastruktur“ liegt der Fokus u.a. auf der Entwicklung von neuen Zertifizierungsworkflows. Dabei ist eine besondere Bedeutung dem Zusammenführen von Operational Technology (OT) und Informationstechnik (IT) beizumessen. Zur Datenintegration aus der Sensor-Feldebene einer Versuchs-wasserstofftankstelle wurde eine solche Infrastruktur zunächst in einer Laborumgebung aufgebaut. T2 - Hannover Messe 2024 - Speakers Corners CY - Hannover, Germany DA - 23.04.2024 KW - IT KW - OT KW - Infrastruktur KW - Datenintregration KW - VPN KW - Verwaltungsschale KW - Open Source KW - Software PY - 2024 AN - OPUS4-59930 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grimmer, Christoph T1 - Development, application and measurement uncertainty of emission reference materials N2 - Volatile organic compounds (VOCs) emitted by furniture and building materials can cause health issues. For an improvement of indoor air quality low emitting materials should be used. Quality assurance and –control (QA/QC) measures require an emission reference material (ERM) with a predictable emission rate of VOCs. The idea is to use porous materials as ERM, which store the VOCs inside their pores and emit them constantly. T2 - Webinar Metrology for Indoor Air Quality Reference materials for QA/QC of the emission test chamber procedure CY - Online meeting DA - 11.04.2024 KW - Emission reference materials KW - Indoor air quality KW - Materials emissions test KW - VOC PY - 2024 AN - OPUS4-59963 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Richter, Matthias T1 - Emission reference materials for indoor air measurements N2 - In industrialised countries more than 80% of the time is spent indoors. Products, such as building materials and furniture, emit volatile organic compounds (VOCs), which are therefore ubiquitous in indoor air. VOC in combination may, under certain environmental and occupational conditions, result in reported sensory irritation and health complaints. Emission concentrations can become further elevated in new or refurbished buildings where the rate of air exchange with fresh ambient air may be limited due to improved energy saving aspects. A healthy indoor environment can be achieved by controlling the sources and by eliminating or limiting the release of harmful substances into the air. One way is to use (building) materials proved to be low emitting. Meanwhile, a worldwide network of professional commercial and non-commercial laboratories performing emission tests for the evaluation of products for interior use has been established. Therefore, comparability of test results must be ensured. A laboratory’s proficiency can be proven by internal and external validation measures that both include the application of suitable emission reference materials (ERM). For the emission test chamber procedure according to EN 16516, no artificial ERM is commercially available. The EU-funded EMPIR project MetrIAQ aims to fill this gap by developing new and improved ERMs. The goal is to obtain a material with a reproducible and temporally constant compound release (less than 10 % variability over 14 days). Two approaches were tested: the impregnation of porous materials with VOC, and the encapsulation of VOC in polymer microcapsules. Impregnation is performed with help of an autoclave and supercritical CO2. The encapsulation is done by interfacial polymerisation on VOC droplets. For both approaches, synthesis and/or material parameters were varied to obtain an optimal ERM. Findings about the optimisation of ERM generation, as well as performance of the best emission reference materials, will be presented. T2 - GAS Analysis 2024 CY - Paris, France DA - 30.01.2024 KW - Emission reference materials KW - Materials emissions test KW - VOC KW - Indoor air quality PY - 2024 AN - OPUS4-59506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - You, Zengchao T1 - Determination of calcium, iron, and selenium in human serum by isotope dilution analysis using MICAP-MS N2 - Trace elemental analysis in human serum is integral in both clinical and research settings. Analyzing the level of some specific elements like Se and Zn helps indicate the nutritional and health status. Furthermore, elucidating the roles of trace elements in various physiological and pathological conditions can shed light on disease mechanisms and potential treatments. Inductively coupled plasma mass spectrometry (ICP-MS) stands out as a preeminent method for trace elemental analysis, given its exceptional sensitivity and minimal sample requirements. However, ICP-MS has challenges, such as argon-related interferences that hinder the accurate quantification of elements like Ca, Fe, and Se. The naturally most abundant isotopes of Ca (40Ca), Fe (56Fe), and Se (80Se) are subject to isobaric interference from 40Ar+, 40Ar16O+, and 40Ar2+, thereby complicating their direct measurement and preventing isotope dilution analysis. In response to these challenges, nitrogen microwave inductively coupled atmospheric pressure mass spectrometry (MICAP-MS) emerges as a viable alternative to ICP-MS, eliminating argon consumption and associated interferences. This study employed MICAP-MS to quantify Ca, Fe, and Se in 11 certified reference human serums using matrix-matched calibration and isotope dilution with the isotopes 40Ca, 56Fe, and 80Se. The results obtained with both methods were validated against certified values, and the suitability of MICAP-MS for isotope dilution was evaluated. Additionally, the performance of MICAP-MS in the Na matrix was investigated and discussed alongside the impact of organic species. T2 - Winter Conference on Plasma Spectrochemistry 2024 CY - Tucson, AZ, USA DA - 15.01.2024 KW - MICAP-MS KW - Isotope-dilution KW - Human serum PY - 2024 AN - OPUS4-60210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -