TY - CONF A1 - Koch, Claudia A1 - Dudek, Gabriele A1 - Mirtsch, Mona T1 - The German Conformity Assessment Panel N2 - The presentation summarizes the economic research activities at Department S concerning Quality Infrastructure. It introduces the new tool "QI-FoKuS" - an annual company survey in Germany, seeking to provide data on conformity assessment and accreditation in Germany. The first company survey deals with the use and certification of management systems with a special focus on information security and the criteria for the selection of certification bodies. T2 - Visit & Workshop at CCAI CY - Beijing, China DA - 10.01.2019 KW - Confromity Assessment KW - Konformitätsbewertung KW - Umfrage KW - Certification KW - Zertifizierung KW - Qualitätsinfrastruktur KW - QI-FoKuS PY - 2019 AN - OPUS4-50089 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koch, Claudia A1 - Blind, K. T1 - Testbeds for standardization in the IIoT N2 - The poster presents our research findings on the role and impacts of testbeds in standardization for the industrial internet of things. Based on a multiple case study, four different approaches were identified followed in the testbeds with regard to their standardization activities. T2 - BRIDGIT2 conference at NSAI CY - Dublin, Irland DA - 11.09.2019 KW - IIoT KW - Normen KW - Industrie 4.0 KW - Standards KW - Normung KW - Standardization KW - Testbed PY - 2019 AN - OPUS4-48937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - Introduction meeting PCA - Analysis of the operation of accreditation bodies in Europe N2 - The long-term goal of the benchmarking project for European accreditation bodies is twofold: First of all, the project is supposed to help the European accreditation attending bodies to improve their processes by identifying best practices and by learning from others. Possibly Secondly, the results of the analysis can be used by the European Cooperation for Accreditation (EA) to identify differences in the operation of the European accreditation bodies and based on this knowledge to promote harmonization of accreditation activities in Europe. T2 - Kick-off at PCA, Warsawa CY - Warsawa, Poland DA - 11.06.2019 KW - Accreditation KW - Benchmarking PY - 2019 AN - OPUS4-48678 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - Introduction meeting NAH - Analysis of the operation of accreditation bodies in Europe N2 - The long-term goal of the benchmarking project for European accreditation bodies is twofold: First of all, the project is supposed to help the European accreditation attending bodies to improve their processes by identifying best practices and by learning from others. Possibly Secondly, the results of the analysis can be used by the European Cooperation for Accreditation (EA) to identify differences in the operation of the European accreditation bodies and based on this knowledge to promote harmonization of accreditation activities in Europe. T2 - Kick-off at NAH, Budapest CY - Budapest, Hungary DA - 19.06.2019 KW - Accreditation KW - Benchmarking PY - 2019 AN - OPUS4-48679 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - Introduction meeting DANAK - Analysis of the operation of accreditation bodies in Europe N2 - The long-term goal of the benchmarking project for European accreditation bodies is twofold: First of all, the project is supposed to help the European accreditation attending bodies to improve their processes by identifying best practices and by learning from others. Possibly Secondly, the results of the analysis can be used by the European Cooperation for Accreditation (EA) to identify differences in the operation of the European accreditation bodies and based on this knowledge to promote harmonization of accreditation activities in Europe. T2 - Kick-off at DANAK, Copenhagen CY - Copenhagen, Denmark DA - 27.06.2019 KW - Accreditation KW - Benchmarking PY - 2019 AN - OPUS4-48680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - Introduction meeting CAI - Analysis of the operation of accreditation bodies in Europe N2 - The long-term goal of the benchmarking project for European accreditation bodies is twofold: First of all, the project is supposed to help the European accreditation attending bodies to improve their processes by identifying best practices and by learning from others. Possibly Secondly, the results of the analysis can be used by the European Cooperation for Accreditation (EA) to identify differences in the operation of the European accreditation bodies and based on this knowledge to promote harmonization of accreditation activities in Europe. T2 - Kick-off at CAI, Prag CY - Prag, Czech Republic DA - 07.07.2019 KW - Accreditation KW - Benchmarking PY - 2019 AN - OPUS4-48681 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - Preparation meeting at the EA General AssemblyI - Analysis of the operation of accreditation bodies in Europe N2 - The 2nd benchmarking round of the project “Analysis of the operation of accreditation bodies in Europe” is envisaged for 2019. In contrast to the 1st round, the BAM will conduct this benchmarking solely without the DAkkS as partner. The 2nd round will make use of the Process Maturity Benchmarking Tool PMBT, the management tool which was developed for and applied in the 1st round. The PMBT will be optimized in advance based on the suggestions and experiences gathered in the benchmarking conducted in 2016. To discuss this adjustment a preparation meeting was conducted in the course of the EA GA in Rome. T2 - General Assembly of the Europeam Co-operation for Accreditation (EA) CY - Rome, Italy DA - 21.05.2019 KW - Accreditation KW - Benchmarking PY - 2019 AN - OPUS4-48682 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Die neue ISO/IEC 17025 – Was ändert sich für Prüf- und Kalibrierungslaboratorien? N2 - Der Vortrag gibt einen Überblick über die Revision der ISO/IEC 17025, einschließlich der Einflüsse auf die Revision und die Veränderungen bezüglich der Anforderungen an Laboratorien. T2 - Shimadzu Expertenzirkel Umweltanalytik CY - Dusseldorf, Germany DA - 04.07.2019 KW - ISO/IEC 17025 KW - Konformitätsbewertung KW - Messunsicherheit KW - Laboratorien PY - 2019 AN - OPUS4-48313 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktuelle Entwicklungen im Bereich der CASCO Normen N2 - Der Vortrag gibt einen Überblick über die Weiterentwicklungen der Normung im Bereich Konformitätsbewertung. Die sogenannten Common Elements werden vorgestellt. Deren Änderungen haben großen Einfluß auf die kommenden Revisionen der CASCO Normnen T2 - Erfahrungsaustausch, Verband akkreditierter Zertifizierungsstellen CY - Berlin, Germany DA - 07.05.2019 KW - Konformitätsbewertung KW - ISO CASCO PY - 2019 AN - OPUS4-48314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Denkler, Tilman T1 - Presentation at AVIC-Workshop - Analysis of the operation of accreditation bodies in Europe N2 - Accreditation is one of the relevant tasks in a modern Quality Infrastructure, as the competence of conformity assessment bodies is assured through accreditation performed by accreditation bodies. To compare the operation of accreditation bodies in Europe and identify best practices a management tool was elaborated and validated by applying it to eight accreditation bodies. The tool made a comparison of the operations of the accreditation bodies possible, despite different sizes, operational processes and organizational forms. The benchmarking project comprised three stages. In the first stage, the processes of accreditation bodies were systematically analyzed. A process map was developed and processes of special relevance for the performance of accreditation bodies were identified and underpinned by indicators. In the second stage, the processes of the German accreditation body Deutsche Akkreditierungsstelle GmbH (DAkkS) were assigned to the tool. This validation stage was used to check and modify the indicators when necessary. In the third stage, the transferability of the model was analyzed by extension to seven other accreditation bodies operating in Europe. The third stage of the project resulted in a workshop attended by experts from the participating ABs, which was used to discuss the results of the comparison and to identify best practices. T2 - Visit & Workshop of NQI Lab SAMR/AVIC and BAM CY - Berlin, Germany DA - 29.10.2019 KW - Accreditation KW - Benchmarking PY - 2019 AN - OPUS4-49449 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -