TY - CONF A1 - Fellinger, Tim-Patrick T1 - Sustainable energy materials and circularity N2 - Li-ion batteries (LIB) are the dominant energy storage technology and present in electrified transportation, electronic devices as well as robotics. This is due to their high energy density (300 watt-hours per kilogram), low self-discharge (1.5-2% per month), long storage life (10 years) and cyclability (500-2000 cycles). Unfortunately, these batteries require the use of scarce, toxic and unethically resourced materials for their fabrication. Furthermore, it is expected an increase of 26 million units of LIB on electric vehicles by 2030 generating a large amount of waste in a very near future. However, those end-of-life batteries can be considered an important source of metals and materials (electrolytes, binders, anodes) to be reused in other applications or incorporated in the battery supply chain. This also pushes the need to redesign the LIB components and other sustainable technologies using low-cost materials. The focus of this symposium is to bring together experts from around the world to discuss the latest advancements in sustainability of battery technologies and their impact on the future landscape of our society and environment. During the symposium, speakers will present recent research and developments in solving future and present problems derived from the exponential demand of LIB manufacturing T2 - Mat-Sus Spring Meeting 2025 CY - Sevilla, Spain DA - 03.03.2025 KW - CRM-free KW - Sustainability KW - Energy Materials PY - 2025 AN - OPUS4-64915 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Molekularsiebende Kohlenstoffe als hochkapazitive und stabile Anoden in Natrium-Ionen-Batterien N2 - In dem Vortrag wird ein Fortschrittsbericht über die laufenden Arbeiten im BMBF-geförderten Verbundprojekt „Dialysorb“ gegeben. Nach einer kurzen Schilderung der Arbeitspaketstruktur und den Arbeitspaketinhalten werden einzelne wissenschaftliche Ergebnisse genannt und kurz diskutiert. So gelang es hier u.a. hochporöse Materialien mittels Gasphasenabscheidung von Kohlenstoffverbindungen derart zu modifizieren, dass nur noch ein Bruchteil der Porosität mittels Gassorption messbar ist. Elektrochemische Sodiierungs-/Dessodiierungsergebnisse deuten darauf hin, dass die Porosität im Kern der Materialien erhalten ist, da die reversible Sodiierungskapazität deutlich erhöht ist. Abschließend werden folgende Arbeitschritte erläutert und der Vortrag zur Diskussion gestellt. T2 - BMBF-Statusmeeting B@TS 2025 CY - Cologne, Germany DA - 07.04.2025 KW - Natrium-Ionen-Batterien KW - Synthetische Anoden KW - Kohlenstoff PY - 2025 AN - OPUS4-64906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Leveraging the Potential of Na-Ion-Batteries with Tailormade Anodes N2 - Research progress on synthetic hard carbon anodes was suggested as key technology to leverage the potential of sodium ion batteries. The background, progress and market size of sodium ion batteries was presented and the relevance of producing such materials in terms of a business case was suggested. T2 - HWR Entrepreneural Workshop 2025 CY - Berlin, Germany DA - 18.10.2025 KW - Natrium-Ionen-Batterien KW - Synthetische Anoden KW - Kohlenstoff PY - 2025 AN - OPUS4-64909 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pedersen, Angus T1 - Mg-Templated Porosity as a Descriptor of Activity and Durability in ZIF-Derived Fe–N–C O2 Reduction Catalysts - Dataset N2 - Atomically dispersed Fe in N-doped carbon (Fe-N-C) catalysts are leading platinum-group-metal-free candidates for the O2 reduction reaction in proton exchange membrane fuel cells (PEMFCs). Zeolitic imidazolate framework (ZIF-8) derived Fe-N-C present the most promising performance; however, they possess a narrow distribution of small micropores, which limits active site accessibility. Here, to induce hierarchical porosity in Fe-N-C, we report a systematic study on MgCl₂·6H₂O-templated ZIF-8-derived Fe-N-C catalysts for the O2 reduction reaction. MgCl₂·6H₂O addition induced complete Zn removal, collapse of the ZIF-8 framework, and formation of large micro- and mesopores, with graphene-like structures. N content was markedly reduced, with conversion from pyridinic to pyrrolic N species. Rotating disc electrode tests showed a progressive increase in O2 reduction activity with MgCl₂·6H₂O, which is strongly correlated (R2 = 0.98) to the formation of large micropores and small mesopores (1-4 nm). This introduces a clear structure-activity design principle for Fe-N-Cs. The enhanced Fe-N-C porosity also leads to increased degradation rates under accelerated stress test conditions, which we attributed to the oxidation of disordered carbon domains and active Fe loss. This study highlights a key trade-off between porosity-driven O2 reduction activity and durability in Fe-N-C catalysts. KW - Single atom KW - Zeolitic imidazolate framework KW - Oxygen reduction PY - 2026 DO - https://doi.org/10.26272/opus4-65228 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-65228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lee, Woojin T1 - Impact of Coating and Drying on Electrochemical Properties of Core-Shell Carbon Materials N2 - Due to the heavy overuse of fossil energy sources since the last couple of centuries, a range of serious concerns such as depletion of fossil fuels and climate change that is driven by extensive carbon dioxide (CO2) emission has risen. Rechargeable batteries have surged as eco-friendly and sustainable energy source alternative. Lithiumion batteries (LIBs) have been the most successful rechargeable battery since their commercialization. However, owing to exhaustion and instability in price of scarce raw materials, sodium-ion batteries (SIBs) have emerged as the most attractive alternative to LIBs. Nonetheless, there are still burdens to overcome for SIBs to achieve competitiveness over LIBs, particularly in improving their energy density. To address the burdens, diverse materials have been studied to date. Yet, progress and development on achieving high performance negative electrode for SIBs still remain as a key object. Hard carbon (HC) has been considered as attractive candidate, because of its high capacity and low production cost. Despite the attractiveness, inherent limitations of HCs such as excessive formation of solid-electrolyte interphase (SEI) and large irreversible capacity loss have hindered their applications. To confront this challenge, core-shell concept has been suggested by the team of Division 3.6 at BAM. The concept is to create carbon coating (shell structure) around the core material in order to mitigate formation of excessive SEI and enhance performance of the negative electrode. Shu-Han Wu and Paul Alexander Appel from Division 3.6 at BAM have synthesized various core-shell materials and have observed promising results. They made great progress in the research of core-shell materials, for example improving initial coulombic efficiency from 31% to 68%. However, there are still room for improvement. The task of this bachelor thesis work is to enhance the electrochemical performance of the core-shell materials and to investigate a more effective carbon coating method on the core material by exploring various coating parameters and different drying procedures. In this bachelor thesis, Shu-Han Wu’s synthesis precedure was repeated, ZIF-8 was pyrolyzed at 1000°C with a consequent treatment with HCl gas and washed with de� ionised water. The material (ZIF8_1000_HCl gas_H2O) was re-synthesized. Increasement in N2 Physisorption was observed after the acid treatment, consistent to Shu-Han Wu’s syntheis. The as-synthesized material was used as core material throughout this bachelor work. Moreover, 4 different core-shell carbon materials were synthesized by using chemical vapor deposition (CVD) and ball milling as synthesis methods. was used as core material and toluene was used as carbon precursor for CVD. CVD displayed an effective formation of shell structure evidenced by steep reduction in specific surface area (SSABET) from N2 physisorption characterization. Ball milling revealed to cause defects in shell structure, which was noticeable on increase in SSABET (from 14 to 379 m2 g-1) and pore size distribution characterization. Drying of powder material prior to CVD process did not exhibit a difference in porosity on the final product after CVD. From the galvanostatic cycling tests at a current density of 20 IVmA g⁻¹, it was evident that formation of shell structure enhances the performance of the material. Among the synthesized core-shell materials, the material double 1.5 h CVD with no ball milling in between exhibited the most excellent performance (ICE 60.1%). Powder drying prior to CVD showed a positive influence on improving the electrochemical performance (ICE improved from 45.1% to 51.9%). Increasing drying temperature of electrode resulted in increasements of performance, where the peak performance was reached at drying at 200°C (ICE 57.7%). The investigations of impacts of coating and drying on electrochemical properties of core-shell carbon materials would provide basis and motivation for further development of advanced negative electrode materials for SIBs. KW - Sodium-ion batteries KW - Hard carbon KW - Core-shell materials PY - 2025 SP - 1 EP - 39 CY - TU Berlin AN - OPUS4-65130 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Bioinspired Electrode Materials N2 - Porous carbon materials are known for their applicability in important areas such as sorption, catalysis and electrochemistry (e.g. fuel cell catalysts, supercapacitor or battery electrodes). It was shown that nitrogen doped carbons (NDCs) act as an inexpensive and highly active non-metal catalyst in the oxygen reduction reaction (ORR), with the potential to reach performances of practical need one day. A key strategy towards improvement for this aim comprises the generation of advantageous porosity, which typically means high surface area and mass transport pores as well as the control over the chemistry of catalytically active sites. My group developed novel sol-gel type strategies that are using molten salts or molten acids as unconventional reaction medium for the porogenesis in doped carbons, thereby revisiting classic activation techniques. Carbon materials with extra high surface area of ~2800 m2 g-1 and pore volumes, up to four times as high as in commercial activated carbons, are obtained. Hierarchical pore systems, like used in nature (leaves, lungs, etc.) facilitate some of the electrochemical performances. Moreover, because of the elements also defining organic matter, also binding motifs can be realized that are reminiscent of proteins/enzymes. We established the pyrolytic template-ion reaction using cations like Mg2+ and Zn2+ to imprint tetrapyrrolic N4 sites (like in the heme molecule), embedded into the carbon structure. The imprinted structure may be utilized as catalytically active site by performing ion-exchange reactions. This way catalytic activity can be tuned for different societal important reactions, but also the defined catalysts structure allows the assignment of structure-performance relations. Other “tricks” that nature uses, are to influence the passage of ions through cell walls, or to expel water molecules from catalytically active sites. I will show some recent work on carbon electrodes used as battery active materials that utilizes similar pathways. T2 - Kolloquium des Instituts für Anorganische und Allgemeine Chermie der Universität Freiburg CY - Freiburg, Germany DA - 04.12.2025 KW - Carbon KW - M-N-C KW - Fuel cell KW - Core-shell KW - Sodium ion battery PY - 2025 AN - OPUS4-65021 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Design, Structure and Performance of Fe-N-C Catalysts Based on Active-Site Imprinting N2 - Atomically dispersed M-N-C catalysts such as Fe-N-Cs are most promising alternatives for precious metal-based catalysts for several energy conversion reactions. Early reports on such materials date back to the 1960´s, when Jasinski pioneered the research based on tetrapyrrolic phthalocyanine macrocycles which were inspired by natural transition metal porphyrin complexes present in enzyme active sites. For decades, the selective synthesis of these catalysts was complicated by the formation of side phases due to the harsh reaction conditions facilitating side phase formation. In 2018, we introduced a mild procedure, which is conservative toward the carbon support and leads to atomically dispersed Fe-N4 site formation at temperatures as low as 80 °C in a wet-chemical step, essentially decoupling the preparation of the N-C backbone from the preparation of the active sites. The key concept therein is the so-called active-site imprinting into the N-C backbone using pyrolytic template ion reactions, allowing for high concentrations of N4 sites resulting in more than 3 at.% of Fe in atomically dispersed phase. Using the same precursor that is used for the preparation of phthalocyanines, we were able to produce atomically-dispersed single-site Fe-N-Cs that consist of tetrapyrrolic FeN4 complexes. The tetrapyrrolic Fe-N-C derivatives are highly active and extraordinary selective electrocatalysts for the oxygen reduction reaction. The well-defined and homogeneous active site structure allows to quantify the intrinsic catalytic activity of the materials in acid and base, reveal insights into the electrocatalytic mechanism and to reveal distinct degradation mechanism upon storage and electrochemical cycling. Herein, the general synthetic strategy of active-site imprinted catalysts will be discussed mainly based on both Mg-ion and Zn-ion templating towards “designed” Fe-N-C catalysts. The tetrapyrrolic active sites will be discussed regarding structure, activity, selectivity and durability. This hopefully stimulates a fruitful discussion of the perspectives in the field. T2 - Chemical Engineering Research Seminar of Higgins Group of McMaster University CY - Hamilton, Canada DA - 29.05.2025 KW - Carbon KW - M-N-C KW - Electrocatalysis KW - Fuel cells PY - 2025 AN - OPUS4-64913 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas T1 - Tetrapyrrolic Nitrogen Doped Carbons by Pyrolytic Template Ion Reactions as Platform for Electrocatalysis N2 - Atomically dispersed M-N-C catalysts such as Fe-N-Cs are most promising alternatives for precious metal-based catalysts for energy conversion reactions. Early reports on such materials date back to the 1960´s, when Jasinski pioneered the research based on tetrapyrrolic phthalocyanine macrocycles which were inspired by natural transition metal porphyrin complexes present in enzyme active-sites. For decades, the selective synthesis of these catalysts was complicated by the formation of side phases due to the harsh reaction conditions facilitating side phase formation. In 2018, we introduced a mild procedure, which is conservative toward the carbon support and leads to atomically dispersed Fe-N4 site formation at temperatures as low as 80 °C in a wet-chemical step, essentially decoupling the preparation of the nitrogen-doped carbon (NDC) backbone from the preparation of the active-sites. The key concept therein is the so-called active-site imprinting into the NDC backbone using pyrolytic template ion reactions, allowing for high concentrations of N4 sites resulting in more than 3 at.% of Fe in atomically dispersed phase. Using the same precursor that is used for the preparation of phthalocyanines, we were able to produce tetrapyrrolic NDCs as a materials platform to synthesize atomically-dispersed single-site Fe-N-Cs comprising tetrapyrrolic FeN4 complexes by ion-exchange reactions. The tetrapyrrolic Fe-N-C derivatives are highly active and extraordinary selective electrocatalysts for the oxygen reduction reaction in acidic. The mere tetrapyrrolic NDC are likewise highly active ORR-catalysts in alkaline. The well-defined and homogeneous active-site structure allows to quantify the intrinsic catalytic activity of the materials in acid and base, reveal insights into the electrocatalytic mechanism and to reveal distinct degradation mechanism upon storage and electrochemical cycling. Herein, the general synthetic strategy will be discussed mainly based on Zn-ion templating towards Fe-N-C catalysts. The catalytic active-sites will be discussed regarding structure and potential as fuel cell catalyst. T2 - Carbon Conference 2025 CY - Saint-Malo, France DA - 29.06.2025 KW - Electrocatalysis KW - Oxygen Reduction Reaction KW - Noble Metal Free KW - Nitrogen Doped Carbon PY - 2025 AN - OPUS4-64968 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Shu-Han T1 - Sodium Storage Mechanisms and Performance Improvement of Synthetic Hard Carbon Materials N2 - Hard carbons (HCs) are promising anodes for sodium-ion batteries (SIBs) due to their high capacity and low cost. However, their broader use is limited by an incomplete understanding of sodium storage mechanisms. Internal porosity is key to high capacity, but tuning its chemical functionality remains challenging. In this study, we designed core–shell carbon materials featuring closed pores and tailored surface chemistry to distinguish reversible sodium storage from irreversible capacity losses associated with solid electrolyte interphase (SEI) formation. Our results reveal that external porosity can be clearly converted into internal porosity, leading to enhanced sodium storage performance, with capacities exceeding those of lithium in graphite. T2 - Advanced Automotive Battery Conference (AABC) 2025 CY - Mainz, Germany DA - 23.06.2025 KW - Sodium-ion batteries KW - Hard carbon KW - Core-shell materials PY - 2025 AN - OPUS4-65133 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Appel, Paul Alexander T1 - Linking Porosity to Storage Capacity: Core-Shell Carbon Materials as High-Capacity Anodes for Sodium Ion Batteries N2 - Hard carbons (HCs) are currently one of the most promising anode materials for sodium-ion batteries (SIBs). However, the Na storage mechanism remains controversial, leaving the theoretical limits of carbon anodes unclear. To deconvolute the specific capacity from irreversible capacity losses, resulting from the formation of solid electrolyte interphase (SEI), core-shell carbon materials were synthesized. Based on these core-shell materials, an investigation of the storage mechanism of sodium is possible. T2 - Advanced Battery Power 2025 CY - Aachen, Germany DA - 01.04.2025 KW - Electrochemical Energy Materials KW - Negative Electrodes KW - Sodium Ion Batteries PY - 2025 AN - OPUS4-65114 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Appel, Paul Alexander T1 - Developing Tailor-Made Core-Shell Carbon Negative Electrode Materials for Sodium Ion Batteries N2 - Hard carbons (HCs) are currently one of the most promising anode materials for sodium-ion batteries (SIBs). However, the Na storage mechanism remains controversial, leaving the theoretical limits of carbon anodes unclear. To deconvolute the specific capacity from irreversible capacity losses, resulting from the formation of solid electrolyte interphase (SEI), core-shell carbon materials were synthesized. Based on these core-shell materials, an investigation of the storage mechanism of sodium is possible. T2 - Sodium Battery Symposium CY - Dresden, Germany DA - 03.09.2025 KW - Electrochemical Energy Materials KW - Negative Electrodes KW - Sodium Ion Batteries PY - 2025 AN - OPUS4-65116 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas T1 - Porous „Ionophoric“ Carbon Materials: Synthesis Routes and Electrochemical Applications N2 - Porosity tuning and “doping” with heteroatoms and/or transition metals are key strategies to improve the performance of porous carbons. Nitrogen doped carbons (NDCs) with macrocyclic functionalities and the respective M-coordinated NDCs (M-N-Cs) containing FeN4 sites, are very promising electrodes for Na-storage and electrocatalytic conversions. Their functional groups are reminiscent of those in biomolecules like e.g. hemoglobin. The materials can carry ions and can be regarded as “ionophoric” carbons. T2 - AKK-Herbsttagung 2025 CY - Mainz, Germany DA - 22.09.2025 KW - Electrocatalysis KW - Energy Storage KW - Noble Metal Free KW - Nitrogen Doped Carbon PY - 2025 AN - OPUS4-64969 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dietzmann, Simon T1 - X-ray Absorption Spectroscopy to Uncover the Structure of Metal and Nitrogen Doped Carbon Electrocatalysts N2 - High-performance electrocatalysts and sodium-ion (Na+) storage materials for Na-ion batteries are essential for efficient energy conversion and storage. Metal and nitrogen enriched carbons (M–N–Cs) are promising candidates due to their intrinsic conductivity and tunable properties through targeted modification. To understand and optimize the catalytically active sites at the pseudo-molecular level, detailed structural characterization is crucial. T2 - Bessy User Meeting CY - Berlin, Germany DA - 03.12.2025 KW - Elechtrochemistry KW - XAS KW - Single atom catalysts PY - 2025 AN - OPUS4-65010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Anna T1 - Tayloring Accessible Surfaces of Activated Carbons via Mechanochemical Processing N2 - Controlling the external accessibility of porous carbons without compromising their internal microporous network is essential for material functionality. Hard Carbons (HC) were ball milled in the presence of aromatic compounds, forming a disordered surface barrier that partially blocks pore entrances. This selectively reduces their external specific surface area (SSA) while preserving internal storage capacity. T2 - Income 2025 CY - Berlin, Germany DA - 14.09.2025 KW - Ball Milling KW - Sealed Porosity KW - Mechanochemistry PY - 2025 AN - OPUS4-65117 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Deciphering Structure-Performance Relations of PGM-Free Fe-N-C Electrocatalysts Based on Synthetic Materials Design N2 - Fe-N-C electrocatalysts are very promising alternatives for precious metal-based catalysts for energy conversion reactions.[1-3] Early reports on such materials date back to the 1960´s, when Jasinski pioneered the research based on tetrapyrrolic phthalocyanine macrocycles which were inspired by natural transition metal porphyrin complexes present in enzyme active sites.[3] For decades, the synthesis of these catalysts with a high iron loading was complicated by the formation of side phases due to the harsh reaction conditions facilitating side phase formation. In 2018, we introduced a mild procedure, which is conservative toward the carbon support and leads to active-site formation at low temperatures in a wet-chemical step, essentially decoupling the preparation of the N-C backbone from the preparation of the active sites.[4, 5] The key concept therein is the so-called active-site imprinting into the N-C backbone using pyrolytic template ion reactions.[4][5] Using the same precursor that is used for the preparation of phthalocyanines, we were able not only to produce atomically-dispersed single-phase Fe-N-Cs with a high iron loading, but were also able to selectively form tetrapyrrolic Fe-N4 complexes.[6] The tetrapyrrolic Fe-N-C derivatives are highly active and extraordinary selective electrocatalysts for the oxygen reduction reaction. Deconvolution of morphological effects on the performance allowed to quantify the intrinsic catalytic activity of the materials in acidic and alkaline conditions and gives new insights into the reaction mechanism in alkaline.[7, 8] A distinct degradation mechanism upon storage was found for the tetrapyrrolic sites and new insights on degradation upon fuel cell operation could be obtained.[9, 10] Herein, the general synthetic material design strategy for atomically dispersed catalysts will be discussed based on tetrapyrrolic Fe-N-C catalysts, which will be analyzed for their potential as PGM-free fuel cell catalysts. T2 - Research Seminar of National Institute of Chemical Physics and Biophysics CY - Tallinn, Estonia DA - 29.09.2025 KW - Carbon KW - M-N-C KW - Electrocatalysis KW - Fuel cells PY - 2025 AN - OPUS4-64916 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Low, Jian Liang T1 - Active Site Determination in Pyrolyzed M-N-C Electrocatalysts by Gas-sorption N2 - Metal and nitrogen-doped carbons (M-N-Cs) with M-N4 moieties as the generally accepted active sites, have gradually reached promising levels of activity towards crucial electrochemical reactions like the oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR). Even the metal-free counterparts, the nitrogen-doped carbons (NDCs), are common and well-studied electrocatalysts for ORR in alkaline media. In these disordered porous materials, the characterization and quantification of (M)N4 sites can be challenging and time-consuming, with many spectroscopic methods drastically overestimating their site accessibility for catalytic applications. In this study, we explore an alternative approach towards active site characterization and quantification in M-N-Cs based on multi-Langmuir analysis of CO2-sorption isotherms at low pressures, with support fromelectronic DFT calculations. T2 - Electrolyser and Fuel Cell Forum 2025 CY - Lucerne, Switzerland DA - 01.07.2025 KW - Metal- and Nitrogen Doped Carbon (M-N-C) KW - Active Site Characterization KW - Gas sorption KW - Active-Site Imprinting PY - 2025 AN - OPUS4-65147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Negative Electrode Ionophoric Core-Shell Carbon for Sodium-Ion Batteries N2 - The current strong interest in electromotive mobility and the need to transition to an energy grid with sustainable storage devices has led to a renewed interest in sodium ion batteries (SIBs). Amorphous disordered carbons such as hard carbons (HCs) are promising candidates for high-capacity negative electrode materials in SIBs. Their high capacities, however, are often accompanied with high irreversible capacity losses during the initial cycles,[1] while low initial losses are accompanied with moderate capacities.[2] In our research we are aiming morphologically and chemically functional carbons. Morphologically, our target is a local separation of reversible sodium storage and irreversible losses in novel synthetic carbon anodes, using a core-shell concept. On chemical side, we aim at ion-binding functional groups. We investigated different methods to obtain core-shell structures to restrict SEI formation to the external particle surface, while leveraging the Na storage potential of porous carbon core materials. Moreover, we apply active-site imprinting to realise disting ion-binding features into the core carbons. The electrochemical performance of those materials can be rather easily altered upon removing/exchanging the ions bound to the functional group. Herein, we will focus on the synthesis of zeolitic imidazolate framework (ZIF) based NDCs. Different analytical methods, e.g., physisorption (N2, Ar, CO2), XPS, XAS, and NMR, will be used to understand the alteration of morphological and chemical features upon ion exchange. T2 - Mat-Sus Spring Meeting 2024 CY - Barcelona, Spain DA - 04.03.2024 KW - Ionophoric carbon PY - 2024 AN - OPUS4-61938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Design Structure and Performance of FeNC Catalysts N2 - Atomically dispersed M-N-C catalysts such as Fe-N-Cs are most promising alternatives for precious metal-based catalysts for energy conversion reactions.[1-3] Early reports on such materials date back to the 1960´s, when Jasinski pioneered the research based on tetrapyrrolic phthalocyanine macrocycles which were inspired by natural transition metal porphyrin complexes present in enzyme active sites.[3] For decades, the selective synthesis of these catalysts was complicated by the formation of side phases due to the harsh reaction conditions facilitating side phase formation. In 2018, we introduced a mild procedure, which is conservative toward the carbon support and leads to atomically dispersed Fe-N4 site formation at temperatures as low as 80 °C in a wet-chemical step, essentially decoupling the preparation of the N-C backbone from the preparation of the active sites.[4, 5] The key concept therein is the so-called active-site imprinting into the N-C backbone using pyrolytic template ion reactions, allowing for high concentrations of N4 sites resulting in more than 3 at.% of Fe in atomically dispersed phase.[4-6] Using the same precursor that is used for the preparation of phthalocyanines, we were able to produce atomically-dispersed single-site Fe-N-Cs that consist of tetrapyrrolic FeN4 complexes.[6] The tetrapyrrolic Fe-N-C derivatives are highly active and extraordinary selective electrocatalysts for the oxygen reduction reaction. The well-defined and homogeneous active site structure allows to quantify the intrinsic catalytic activity of the materials in acid and base,[7, 8] reveal insights into the electrocatalytic mechanism and to reveal distinct degradation mechanism upon storage and electrochemical cycling.[9, 10] Herein, the general synthetic strategy of active-site imprinted catalysts will be discussed mainly based on Zn-ion templating towards tetrapyrrolic Fe-N-C catalysts. The catalytic active sites will be discussed regarding structure, activity, selectivity and durability, hence the potential as fuel cell catalyst. T2 - ECS Spring Meeting 2025 CY - Montreal, Canada DA - 18.05.2025 KW - Fuel Cell KW - ELectrocatalyst KW - Fe-N-C KW - Carbon PY - 2025 AN - OPUS4-64910 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cerny, Alain T1 - Engineering Activated Carbon via Chemical Vapor Deposition for High-Performance Core-Shell Carbon Anodes in Sodium-Ion Batteries N2 - Rising demand for sustainable energy storage has renewed interest in sodium-ion batteries (SIBs) as alternative to lithium-ion batteries. Although hard carbon and related materials are common SIB-anodes, the correlation between its structure and ion storage mechanism remains unclear.[1] As shown recently, the pore design is essential to block the formation of excessive solid electrolyte interphase (SEI) and allows the formation of pseudo-metallic clusters inside the pores.[2,3] Adjusting the diameter of the pore entrance, enables a reversible low-potential plateau (< 0.1 V), which significantly enhances the capacity (potentially up to 450-500 mAh/g) compared to graphite (Qtheo = 372 mAh/g) in Li-ion batteries.[2] Activated carbon (AC) is a low-cost material with abundant micropores and high surface area, making it a promising anode candidate for SIBs. However, its performance is often hindered by structural disorder and excessive SEI-formation. Hence, mitigating active-species loss is essential to achieve high specific capacities (> 300 mAh g-1).[3] The aim herein was to investigate the relationship between the properties of the AC and the CVD-conditions required to achieve an efficient SIB-anode. This study introduces an optimized chemical vapor deposition (CVD) method to modify various, highly porous commercial ACs aiming towards core-shell carbons, consisting of a porous core and a non-graphitic CVD-shell.[3] The ACs were treated via CVD and characterized using a range of techniques including gas physisorption, small-angle x-ray scattering and X-ray diffraction. The electrochemical properties of the different materials, prior and after CVD-coating, were analysed in half cells vs. Na-metal. After coating, gas physisorption confirmed a significantly lower surface area for the materials. Depending on the porosity of the material, a longer CVD-time was necessary to fully coat the particles. The successful formation of core-shell carbons enables separation of the storage mechanism from SEI-formation. The CVD-process enables precise control over the microstructure of the carbon material, allowing to enhance the reversible Na-storage capacity, e.g., from 107 mAh g-1 to 353 mAh g-1 while significantly reducing initial Coulombic losses by 73%. The greatly increased low-potential capacity verifies the formation of an electrolyte-tight CVD shell enabling Na-storage in the porosity of the core. The established link between porosity, CVD-parameters, and performance guides optimization for future materials. T2 - Batterieforum 2026 CY - Berlin, Germany DA - 20.01.2026 KW - Sodium-Ion Battery KW - Carbon KW - Chemical Vapour Deposition PY - 2026 AN - OPUS4-65510 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Shu-Han T1 - Revealing the Impact of Nitrogen Sites on the Sodium Storage Mechanism in Carbon Electrodes N2 - Unlike lithium-ion batteries (LIBs), where crystalline graphite is commonly used as the negative electrode material, disordered carbons are regarded as more promising for sodium-ion batteries (SIBs). However, further advances towards better reversibility and higher specific capacity are still needed to match or even exceed the properties of graphite in LIBs. The main challenge is the complex and unpredictable Na-storage mechanism in disordered carbons. Recently, Matsukawa et al. have reported that the reversibility of (de)sodiation processes of ultra microporous carbons is higher compared to carbon materials with larger pore sizes.[2] Ultra micropores are accessible only to Na+-ions and not to solvent molecules. Therefore, ultra micropores can be used for Na-storage, however, do not significantly contribute to side reactions caused by solid-electrolyte interphase (SEI) formation, which reduces the related irreversible capacity loss. Building on this concept, the origins of specific capacity and irreversible losses were further explored in the current work by modifying the chemical composition of zeolitic imidazolate framework (ZIF-8) derived carbons, while maintaining comparable porosity. This involved adjusting the nitrogen content as well as the types of nitrogen sites through temperature variation. Subsequently, these ZIF-8 derived carbons were modified with a protective ion-sieving carbon shell formed by chemical vapor deposition (CVD). This synthesis methodology enables effective distinction between reversible Na-storage and irreversible processes, e.g., SEI-formation. The former and later are mainly dictated by the properties of the ZIF-derived carbon core and the CVD based shell, respectively. The structure and morphology of the materials were characterized by electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy. In addition, different gas sorption techniques were carried out to analyze the porosity, pore sizes and specific surface areas. The electrochemical performance of the prepared materials was evaluated in coin cells vs. Na-metal. The results of the tailor-made core-shell carbons reveal that a higher nitrogen content leads to a greater capacity in the sloping region, but to a lower capacity in the plateau region of the voltage profile. In addition, the overall capacity is higher for materials with lower nitrogen content. Lastly, it is important to highlight that the incorporation of ion-sieving carbon shell results in a significant overall increase in capacity compared to materials without a carbon shell. The highest reversible capacities (i.e., 381 +/- 4 mAh g–1) were obtained for the core-shell carbon comprising a ZIF-derived core pyrolyzed at 1000°C. Apparently, the N-sites in the as-synthesized materials facilitate the adsorption of Na+ ions, indicating that Na+ ions preferentially adhere to these active sites during the sodiation process. It is worth noting that these results were observed while minimizing side reactions, making them more reliable and providing conclusive evidence for the long-debated Na-storage mechanism. Moreover, the lower capacity observed in materials with higher nitrogen content may be attributed to a lower electrical conductivity. T2 - Advanced Battery Power Conference 2025 CY - Aachen, Germany DA - 02.04.2025 KW - Sodium-ion batteries KW - Hard carbon KW - Core-shell materials PY - 2025 AN - OPUS4-65132 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Menga, Davide A1 - Li, Yan‐Sheng A1 - Damjanović, Ana Marija A1 - Proux, Olivier A1 - Wagner, Friedrich E. A1 - Fellinger, Tim-Patrick A1 - Gasteiger, Hubert A. A1 - Piana, Michele T1 - On the Stability of an Atomically‐Dispersed Fe−N−C ORR Catalyst: An In Situ XAS Study in a PEMFC N2 - The stability of Fe−N−C oxygen reduction reaction (ORR) electrocatalysts has been considered a primary challenge for their practical application in proton exchange membrane fuel cells (PEMFCs). While several studies have attempted to reveal the possible degradation mechanism of Fe−N−C ORR catalysts, there are few research results reporting on their stability as well as the possible Fe species formed under different voltages in real PEMFC operation. In this work, we employ in‐situ X‐ray absorption near‐edge structure (XANES) to monitor the active‐site degradation byproducts of an atomically dispersed Fe−N−C ORR catalyst under a H2/O2‐operating PEMFC at 90 % relative humidity and 80 °C. For this, stability tests were carried out at two constant cell voltages, namely 0.4 and at 0.8 V. Even though the ORR activity of the Fe−N−C catalyst decreased significantly and was almost identical at the end of the tests for the two voltages employed, the analysis of the XANES recorded under H2/N2 configuration at 0.6 and 0.9 V within the stability test suggests that two different degradation mechanisms occur. They are demetalation of iron cations followed by their precipitation into Fe oxides upon operation at 0.8 V, versus a chemical carbon oxidation close to the active sites, likely triggered by reactive oxygen species (ROS) originated from the H2O2 formation, during the operation at 0.4 V. KW - PGM-free catalysts PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-638981 DO - https://doi.org/10.1002/celc.202400228 SN - 2196-0216 VL - 11 IS - 18 SP - 1 EP - 16 PB - Wiley VHC-Verlag AN - OPUS4-63898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Menga, D. A1 - Low, Jian Liang A1 - de Oliveira Guilherme Buzanich, Ana A1 - Paulus, B. A1 - Fellinger, Tim-Patrick T1 - The Tetrapyrollic Motif in Nitrogen Doped Carbons and M-N-C Electrocatalysts as Active Site in the Outer-Sphere Mechanism of the Alkaline Oxygen Reduction Reaction N2 - Development and fundamental understanding of precious-group-metal-free electrocatalysts is hampered by limitations in the quantification of the intrinsic activity of different catalytic sites and understanding the different reaction mechanisms. Comparing isomorphic nitrogen-doped carbons, Zn-N-Cs and Fe-N-Cs with the common tetrapyrrolic motif, a catalyst-independent outer-sphere rate-determining step in the alkaline oxygen reduction reaction is observed. Density functional theory (DFT) simulations on tetrapyrrolic model structures indicate the highest occupied molecular orbital (HOMO) level as a good descriptor for the catalytic activity. Contour plots suggest that the electron transfer occurs directly from the tetrapyrrolic coordination site, rather than from the metal center. Metal-free tetrapyrrolic N4 sites are discovered to be highly active oxygen reduction reaction (ORR) active sites in alkaline that reach turnover frequencies (TOF) of 0.33 and 1.84 s−1 at 0.80 and 0.75 VRHE in the order of magnitude of tetrapyrrolic Fe–N4 sites in the acidic ORR. While Zn-coordination lowers the HOMO level and therefore the catalytic activity, Fe-coordination lifts the HOMO level resulting in TOF values of 0.4 and 4 s−1 for tetrapyrrolic Fe–N4 sites at 0.90 and 0.85 VRHE, respectively. At higher mass activities, the peroxide reduction becomes rate-limiting, where highest peroxide production rates are observed for the nitrogen-doped carbon. KW - Tetrapyrollic KW - Motif KW - Nitrogen KW - Carbons KW - Alkaline Oxygen PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-606239 DO - https://doi.org/https://doi.org/10.1002/aenm.202400482 SN - 1614-6832 VL - 2024 SP - 1 EP - 8 PB - Wiley-VCH AN - OPUS4-60623 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schwarz, I. A1 - Rieck, Arielle A1 - Mehmood, Asad A1 - Bublitz, R. A1 - Bongers, L. A1 - Weuster-Botz, D. A1 - Fellinger, Tim-Patrick T1 - PEM Electrolysis in a Stirred-Tank Bioreactor Enables Autotrophic Growth of Clostridium ragsdalei with CO2 and Electrons N2 - Acetogenic bacteria produce CO2-based chemicals in aqueous media by hydrogenotrophic conversion of CO2, but CO is the preferred carbon and electron source. Consequently, coupling CO2 electrolysis with bacterial fermentation within an integrated bio-electrocatalytical system (BES) is promising, if CO2 reduction catalysts are available for the generation of CO in the complex biotic electrolyte. A standard stirred-tank bioreactor was coupled to a zero-gap PEM electrolysis cell for CO2 conversion, allowing voltage control and separation of the anode in one single cell. The cathodic CO2 reduction and the competing hydrogen evolution enabled in-situ feeding of C. ragsdalei with CO and H2. Proof-of-concept was demonstrated in first batch processes with continuous CO2 gassing, as autotrophic growth and acetate formation was observed in the stirred BES in a voltage range of −2.4 to −3.0 V. The setup is suitable also for other bioelectrocatalytic reactions. Increased currents and lower overvoltages are however required. Atomically-dispersed M−N−C catalysts show promise, if degradation throughout autoclaving can be omitted. The development of selective and autoclavable catalysts resistant to contamination and electrode design for the complex electrolyte will enable efficient bioelectrocatalytic power-to-X systems based on the introduced BES. KW - Energy Conversion PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594766 DO - https://doi.org/10.1002/celc.202300344 SN - 2196-0216 SP - 1 EP - 10 PB - Wiley VHC-Verlag AN - OPUS4-59476 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schwarz, I. A1 - Rieck, Arielle A1 - Mehmood, Asad A1 - Bublitz, R. A1 - Bongers, L. A1 - Weuster-Botz, D. A1 - Fellinger, Tim-Patrick T1 - PEM Electrolysis in a Stirred-Tank Bioreactor Enables Autotrophic Growth of Clostridium ragsdalei with CO2 and Electrons N2 - Acetogenic bacteria produce CO2-based chemicals in aqueous media by hydrogenotrophic conversion of CO2, but CO is the preferred carbon and electron source. Consequently, coupling CO2 electrolysis with bacterial fermentation within an integrated bio-electrocatalytical system (BES) is promising, if CO2 reduction catalysts are available for the generation of CO in the complex biotic electrolyte. A standard stirred-tank bioreactor was coupled to a zero-gap PEM electrolysis cell for CO2 conversion, allowing voltage control and separation of the anode in one single cell. The cathodic CO2 reduction and the competing hydrogen evolution enabled in-situ feeding of C. ragsdalei with CO and H2. Proof-of-concept was demonstrated in first batch processes with continuous CO2 gassing, as autotrophic growth and acetate formation was observed in the stirred BES in a voltage range of 􀀀 2.4 to 􀀀 3.0 V. The setup is suitable also for other bioelectrocatalytic reactions. Increased currents and lower overvoltages are however requ KW - PEM KW - Stirred-Tank Bioreactor KW - Clostridium ragsdalei PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-615239 UR - http://www.chemelectrochem.org/ DO - https://doi.org/10.1002/celc.202300344 VL - 11 IS - 6 SP - 1 EP - 9 PB - Chemistry Europe and Wiley-VCH GmbH AN - OPUS4-61523 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Menga, D. A1 - Wagner, F. E. A1 - Fellinger, Tim-Patrick T1 - Life cycle of single atom catalysts: a Mo¨ssbauer study on degradation and reactivation of tetrapyrrolic Fe–N–C powders N2 - The degradation of a single-site atomically dispersed, model Fe–N–C powder catalyst with high activity is investigated using cryo-Mössbauer spectroscopy. The results indicate a degradation initiated by an Fe2+ to Fe3+ oxidation due to coordination of oxygen to tetrapyrrolic Fe–N4 sites at atmospheric conditions (change between characteristic doublets) before iron(III) oxide is formed (sextet). Thermal reactivation can be used to restore substantial catalytic activity of aged Fe–N–C powders. KW - Life cycle KW - Atom catalysts KW - Tetrapyrrolic Fe–N–C powders PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-586007 DO - https://doi.org/10.1039/d3mh00308f SN - 2051-6347 SP - 1 EP - 7 PB - Royal Society of Chemistry (RSC) AN - OPUS4-58600 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Menga, D. A1 - Wagner, F. E. A1 - Fellinger, Tim-Patrick T1 - Life cycle of single atom catalysts: a Mössbauer study on degradation and reactivation of tetrapyrrolic Fe–N–C powders N2 - The degradation of a single-site atomically dispersed, model Fe–N–C powder catalyst with high activity is investigated using cryo-Mössbauer spectroscopy. The results indicate a degradation initiated by an Fe2+ to Fe3+ oxidation due to coordination of oxygen to tetrapyrrolic Fe–N4 sites at atmospheric conditions (change between characteristic doublets) before iron(III) oxide is formed (sextet). Thermal reactivation can be used to restore substantial catalytic activity of aged Fe–N–C powders. KW - Single atom catalysts KW - Mössbauer study KW - Tetrapyrrolic Fe–N–C powders PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-589352 DO - https://doi.org/10.1039/d3mh00308f VL - 10 SP - 5577 EP - 5583 PB - Royal Society of Chemistry AN - OPUS4-58935 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mieller, Björn A1 - Fellinger, Tim-Patrick T1 - Berlin Battery Lab - Vom Material zur Zelle - Batterieinnovation aus Berlin N2 - Das Berlin Battery Lab (BBL) vereint exzellente Materialforschung, modernste Analytik und gezielten Technologietransfer. Als gemeinsames Labor von BAM, HZB und der Humboldt Universität zu Berlin entwickeln wir zukunftsfähige Natrium-Ionen- und Metall-Schwefel-Batterien – von der Materialidee bis zur funktionsfähigen Zelle. T2 - Batteriaforum Deutschland CY - Berlin, Germany DA - 20.01.2026 KW - Batterie KW - Kooperation KW - Natrium-Ionen KW - BBL PY - 2026 AN - OPUS4-65410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bates, J. S. A1 - Martinez, J. J. A1 - Hall, M. N. A1 - Al-Omari, A. A. A1 - Murphy, E. A1 - Zeng, Y. A1 - Luo, F. A1 - Primbs, M. A1 - Menga, D. A1 - Bibent, N. A1 - Sougrati, M. T. A1 - Wagner, F. E. A1 - Atanassov, P. A1 - Wu, G. A1 - Strasser, P. A1 - Fellinger, Tim-Patrick A1 - Jaouen, F. A1 - Root, T. W. A1 - Stahl, S. S. T1 - Chemical Kinetic Method for Active-Site Quantification in Fe-N‑C Catalysts and Correlation with Molecular Probe and Spectroscopic Site-Counting Methods N2 - Mononuclear Fe ions ligated by nitrogen (FeNx) dispersed on nitrogen-doped carbon (Fe-N-C) serve as active centers for electrocatalytic O2 reduction and thermocatalytic aerobic oxidations. Despite their promise as replacements for precious metals in a variety of practical applications, such as fuel cells, the discovery of new Fe-N-C catalysts has relied primarily on empirical approaches. In this context, the development of quantitative structure−reactivity relationships and benchmarking of catalysts prepared by different synthetic routes and by different laboratories would be facilitated by the broader adoption of methods to quantify atomically dispersed FeNx active centers. In this study, we develop a kinetic probe reaction method that uses the aerobic oxidation of a model hydroquinone substrate to quantify the density of FeNx centers in Fe-N-C catalysts. The kinetic method is compared with low-temperature Mössbauer spectroscopy, CO pulse chemisorption, and electrochemical reductive stripping of NO derived from NO2 − on a suite of Fe-N-C catalysts prepared by diverse routes and featuring either the exclusive presence of Fe as FeNx sites or the coexistence of aggregated Fe species in addition to FeNx. The FeNx site densities derived from the kinetic method correlate well with those obtained from CO pulse chemisorption and Mössbauer spectroscopy. The broad survey of Fe-N-C materials also reveals the presence of outliers and challenges associated with each site quantification approach. The kinetic method developed here does not require pretreatments that may alter active-site distributions or specialized equipment beyond reaction vessels and standard analytical instrumentation. KW - Active-Site Quantification PY - 2023 DO - https://doi.org/10.1021/jacs.3c08790 SP - 1 EP - 16 PB - ACS Publications AN - OPUS4-58889 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas A1 - Fellinger, Tim-Patrick T1 - Current State of Research of Environmentally Friendly, Alternative Materials - Sodium-Ion-Batteries as an Example N2 - In order meet the anticipated future need for battery-based energy storage, it is essential to explore alternative systems beyond lithium-ion batteries. Sodium-ion batteries emerge as a promising option due to the abundance of readily available materials and the potential for reduced costs. T2 - 32. Sitzung Beraterkreis Technologie (BKT) CY - Cologne, Germany DA - 19.10.2023 KW - Sodium-ion-batteries PY - 2023 AN - OPUS4-58886 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mehmood, Asad A1 - Fellinger, Tim-Patrick T1 - Ionothermal Template Transformation as a Sustainable Route Towards Carbon Electrodes in Energy Storage and Conversion N2 - Porous carbons with tuneable functionalities and morphologies have extensively been employed as electrode materials in a variety of electrochemical energy conversion and storage systems for instance in fuel cells and electrolysers as active catalysts and catalyst supports, and in secondary batteries as anode materials. Amorphous carbons with well-developed pore structures are of particular interest due to their superior mass-transport characteristics and remarkable charge storage capacities. T2 - Nano-Pak 2023, 2nd International Conference on Emerging Trends & Innovations in Nanotechnology CY - Lahore, Pakistan DA - 17.06.2023 KW - Ionothermal Template Transformation KW - Sustainable Route KW - Carbon Electrodes PY - 2023 AN - OPUS4-58897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Metal chloride activation revisited: a sol-gel process to functional carbons N2 - Porous carbon materials are known for their applicability in important areas such as sorption, catalysis and electrochemistry (e.g. fuel cell catalysts, supercapacitor or battery electrodes). It was shown that nitrogen doped carbons (NDCs) act as an inexpensive and highly active non-metal catalyst in the oxygen reduction reaction (ORR), with the potential to reach performances of practical need one day. A key strategy towards improvement for this aim comprises the generation of advantageous porosity, which typically means high surface area and mass transport pores as well as the control over the chemistry of catalytically active sites. My group is developing novel sol-gel type strategies that are using molten salts or molten acids as unconventional reaction medium for the porogenesis in doped carbons, thereby revisiting classic activation techniques.[1,2] Carbon materials with extra high surface area of ~2800 m2 g-1 and pore volumes, up to four times as high as in commercial activated carbons, are obtained.[3] It turns out that the meso- and macrostructure is generated by means of phase separation rather than leaching reactions. However, chemical reactions between the carbon precursor and the melt are also involved. The salt cations Mg2+ and Zn2+ act as template ions, which results in metal coordination sites, embedded into the carbon structure.[4,5] The imprinted structure may be utilized as catalytically active site by performing ion-exchange reactions. The novel preparation strategy towards highly active electrocatalysts will be presented for Mg and Zn and further discussed for lighter elements. T2 - Carbon Chemistry and Materials Conference 2022 CY - Rome, Italy DA - 10.10.2024 KW - Activated carbon KW - Salt templating PY - 2022 AN - OPUS4-61936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Structure-Performance Relations of PGM-free Electrocatalysts for PEM Fuel Cells N2 - Proton-exchange membrane fuel cells are amongst the most promising energy conversion technologies today. Herein non-precious iron-coordinated nitrogen doped carbons (Fe-N-Cs) as well as metal-free nitrogen-doped carbons (NDCs) are very promising alternatives for Pt-based cathode catalysts. The early reports on the application of such materials date back to the 1960´s when Jasinski demonstrated that - similar to natural porphyrins - N-coordinated transition metal complexes can be active sites for the ORR.1 The preparation of Fe-N-Cs was strongly optimized over the years; still they typically remain with harsh reaction conditions that complicate the selective formation of active FeN4 sites. Until recently, the employment of pyrolytic temperatures was a dogma for the synthesis of FeN4 sites, however coming with unfavorable side reactions. To avoid those harmful side reaction a limit of maximum ≈3 wt.% of Fe (depending on the precursor) was reached, which was also limiting the progress in catalyst performance for this class of materials.2, 3 Since 2006 it was shown that nitrogen doped carbons (NDCs) act as an inexpensive and highly active non-metal catalyst in the oxygen reduction reaction (ORR).4 Both, NDCs and Fe-N-Cs nowadays show the potential to reach performances of practical need, where NDC seem to be promising only for alkaline conditions, while Fe-N-Cs show promise independent of the pH.5, 6 For both PGM-free catalysts, high performance requires advantageous porosity, which typically means high surface area and mass transport pores as well as the control over the chemistry of catalytically active sites. Results and Discussion My group is developing novel synthetic strategies e.g. using molten salts or molten acids as unconventional reaction medium for the preparation of carbons materials.7, 8 Carbon materials with tunable very high surface area of ~2800 m2 g-1 and pore volumes, up to four times as high as in commercial activated carbons, are obtained. Fig. 1: Scheme of the porogenesis mechanism for NDCs by phase separation in of molten salt carbonization (a) to obtain tunable high surface area and porous carbon materials with varying nitrogen content (b). It turned out that such NDCs synthesized in presence of Mg2+ or Zn2+ give rise to a high degree of pyridinic and pyrrolic sites and outstanding ORR activity in alkaline conditions. The salt cations Mg2+ or Zn2+ act as template ions, which results in tetrapyrrolic functional groups embedded into the carbon structure. Based on this, we recently introduced a mild procedure to synthesize Fe-N-C, which leads to active-site formation at low temperatures due to coordination of Fe ions to the tetrapyrrolic functional groups of NDCs.2, 3 Figure 2: Scheme of the Active-Site Imprinting Strategy. A pyrolytic template-ion reaction forms a tetrapyrrolic functional group within the carbon framework (first step). Exchange of the template ion T (with T=Mg2+ or Zn2+) with Fe results in tetrapyrrolic Fe-N-C. The synthesis strategy of active-site imprinting and transmetalation is decoupling the preparation of NDCs from the preparation of the active sites and therefore breaks with the dogma of Fe-N-Cs preparation, circumventing the limitation to 3 wt.% of Fe.9 After a thermal activation step the Fe-N-Cs derived from active site imprinting show very good performance of ORR in acidic conditions, both on the half-cell (rotating disc electrode) and full-cell (5cm2 PEM single cell) level. Figure 3: a) Rotating disk electrode measurements show the large increase in ORR activity and low amount of peroxide formed by exchange of Zn to Fe coordinated to tetrapyrrolic NDC, especially when followed by a second heat treatment. b) Single cell PEMFC H2-O2 tests show a peak power density above 0.4 W cm-2 at a catalyst loading of 2 mg cm-2. Active-site imprinting is currently used by many groups worldwide, successfully pushing the performance of Fe-N-Cs forward, with higher Fe loadings and improved porosities.10-12 Challenges are the moderate turnover frequency (0.24 e- s-1 at 0.8 VRHE) of tetrapyrrolic Fe-N4 sites, 13 and a moderate shelf-life of tetrapyrrolic Fe-N-Cs in atmospheric conditions.14 Besides improvements of electrode engineering and optimization of fuel cell management, an improved synthetic control, leading to more active and stable catalytic environments are needed to tackle the need of sustainable electrocatalysts for future energy conversion technology.15 T2 - International Conference on Materials and Systems for Sustainability (ICMaSS2023) CY - Nagoya, Japan DA - 01.12.2023 KW - PGM-free catalysts PY - 2023 AN - OPUS4-61937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - On the structure of doped carbon electrodes N2 - Carbon-based materials are promising electrodes for energy applications. Herein an overview of morphological and chemical features of such carbon materials is given. It is further shown how morphological and chemical features must be devonvoluted to be able to elucidate structure-performance realtionships that are critical to the improvement of the materials for applications such as batteries or fuel cells. T2 - TEC Summer Seminar 2022 CY - Monte Isola, Italy DA - 06.09.2022 KW - Carbon KW - M-N-C KW - Electrocatalysis KW - Energy storage PY - 2022 AN - OPUS4-61935 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas T1 - Core-Shell Materials as Advanced Anodes for Sodium Ion Batteries N2 - The current imperative to shift towards an energy grid equipped with sustainable energy storage solutions has caused a renewed interest in sodium-ion batteries (SIBs). Hard carbons (HCs) are a promising option high-capacity anode materials in SIBs. Nevertheless, their elevated capacities frequently come at the cost of experiencing substantial non-reversible initial capacity losses. Commonly, significant losses are associated with irreversible reactions, such as the creation of the solid electrolyte interphase (SEI), that occur during the initial sodium insertion in HC-materials. Intriguingly, high values of irreversible capacity are often found for samples with experimentally determined low specific surface area.[1] A more comprehensive understanding of the structure-property relations is essential for quantifying and grasping the potential of hard carbon materials in sodium-ion batteries (SIBs). Thus, the objective is to employ analytical methods to establish a link between the structure and the electrochemical attributes of HC materials. This has been a challenge, partly due to the non-stoichiometric nature of the sodium storage mechanism and the disordered structure of HCs. To address the challenges mentioned above, our approach is to explore whether a core-shell structure can separate sodium storage and SEI-formation. This way, we can investigate and fine-tune storage capacity and irreversible losses, independently. The strategy involves the synthesis of various porous carbon structures to serve as the core material and their combination with sodium-conductive structures to core-shell materials. Herein, we will present different synthesis routes towards tailor-made carbon core materials. Moreover, different coatings concepts will be introduced, and the electrochemical performance of the core and core-shell materials compared. To elucidate the storage mechanism, the results of advanced analytical methods such as operando NMR and SAXS will be presented. Generally, these core-shell anodes promise to enable high capacities accompanied with low irreversible losses due to optimized SEI-formation. T2 - GDCh Electrochemistry 2024 CY - Braunschweig, Germany DA - 16.09.2024 KW - Sodium Ion Batteries KW - Negative Electrodes KW - Core Shell Materials KW - Energy Storage PY - 2024 AN - OPUS4-61145 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Valorization of carbon dioxide by the electrocatalytic reduction coupled to acetogens via multiple electron carriers N2 - A summary of the DFG project "Ecat-Acetogens" within the SPP priority programm Ebiotech (2240) was given. The successful developmante of a bioelectrocataltic reactor system based on standard 2l stirred tank bioreactors and common 5cm2 singel cell electrolysis reactors was presnted and first results discussed based on the catlytic properties of a specifically designed cathode catalyst for CO2 reduction. T2 - DFG SPP Statusmeeting Ebiotech 2024 CY - Jena, Germany DA - 22.04.2024 KW - CO2 conversion KW - Bioelectrocatalytic reactor PY - 2024 AN - OPUS4-61939 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schwarz, I. A1 - Rieck, Arielle A1 - Fellinger, Tim-Patrick A1 - Weuster-Botz, Dirk T1 - Bio-electrochemical CO2 conversion into organic products using precious-metal free electrocatalysts N2 - For the realization of a sustainable economy, it is of great importance to make use of CO2 for the production of multi-carbon organic chemicals used as feedstock in the chemical industry as well as carbon-neutral fuels (Varela et al. 2019). A promising approach is the electrochemical CO2 reduction followed by microbial conversion of the reduced products. KW - Bio-electrochemical KW - Organic products KW - Electrocatalysts PY - 2024 SP - 1 EP - 2 AN - OPUS4-59572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Commercially Available Sodium-Ion Cells: Links between Material and Electrode Properties and the electrochemical Performance N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regards to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells. Two different SIB-cell types were compared in terms of electrode size, thickness, loading etc. Furthermore, the composition of the active materials and electrolyte was investigated and compared. Finally, the gained results were linked to the different data sheet performance of the two cell types. T2 - MATSUS Conference 2025 CY - Sevilla, Spain DA - 03.03.2025 KW - Battery KW - Sodium-Ion-Battery KW - Electrochemical Energy Storage KW - Energy Storage PY - 2025 AN - OPUS4-62932 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Linking Material and Electrode Properties to the Cell Performance of Commercially Available SIBs N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regards to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells.[1,2] Two different SIB-cell types were compared in terms of electrode size, thickness, loading etc. Furthermore, the composition of the active materials and electrolyte was investigated and compared. Finally, the gained results were linked to the different data sheet performance of the two cell types. T2 - Advanced Battery Power 2025 CY - Aachen, Germany DA - 01.04.2025 KW - Battery KW - Sodium-Ion-Battery KW - Electrochemical Energy Storage KW - Energy Storage PY - 2025 AN - OPUS4-62924 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sander, Luise T1 - Comparison of Commercially Available SIBs: Linking Material and Electrode Properties to Cell Performance N2 - As the first commercial sodium-ion-batteries (SIBs) are available for purchase, it is possible to investigate material composition. Gaining an insight into the material composition of these SIBs is of interest not only for the classification of possible safety risks and hazards, but also in regards to recycling. Herein we report the preliminary investigations of the chemical and structural composition of first commercial SIB-cells. Two different SIB-cell types were compared in terms of electrode size, thickness, loading etc. Furthermore, the composition of the active materials and electrolyte was investigated and compared. Finally, the gained results were linked to the different data sheet performance of the two cell types. T2 - Batterieforum 2025 CY - Berlin, Germany DA - 21.01.2025 KW - Battery KW - Sodium-Ion-Battery KW - Electrochemical Energy Storage KW - Energy Storage PY - 2025 AN - OPUS4-62921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krug von Nidda, Jonas T1 - Single Cell Exchange in Battery Packs – Sustainability vs. Safety Aspects N2 - Lithium-ion batteries usually consist of numerous individual cells. There is ongoing discussion about enhancing sustainability by considering the replacement of heavily aged or damaged cells. Nevertheless, the planned replacement of individual cells poses significant challenges in ensuring the required reliability and safety of the refurbished device. T2 - KLIB Gesprächsrunde Batteriesysteme CY - Online meeting DA - 16.05.2023 KW - Lithium Ion Batteries KW - Lithium Ion Cells KW - Cell Exchange KW - Safety KW - Sustainability PY - 2023 AN - OPUS4-59272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Overview of Battery Research Activities at BAM N2 - An overview on battery research activities of BAM was given using a seletion of activities of all work packages within the field of activity EES and selected activities of divsion 3.6. T2 - Boot Camp of the BAccara Graduate School on Batteries CY - Bad Sassendorf, Germany DA - 24.04.2024 KW - State of Safety KW - Compositional traceability KW - Sustainable energy materials KW - Sodium Ion Batteries PY - 2024 AN - OPUS4-61940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Chemie der Energiewende N2 - Es wurde ein Überblick über die BAM-Aktivitäten im Bereich Chemie der Energiewende gegeben. Dabei wurde ein Fokus auf Aktivitäten in Aktivitätsfeld EES und im Fachbereich 3.6 gelegt. T2 - 30 Jahre Naturwissenschaftliches Studium in Zittau CY - Zittau, Germany DA - 13.04.2024 KW - Chemie KW - Energiewende PY - 2024 AN - OPUS4-61941 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Sodium-Ion Battery Research and Testing at BAM N2 - An overview of activities at BAM on the topic of sodium ion batteries was given. Examples of the internal SIB-links project were given and a focus on novel synthetic anodes. T2 - Sodium Battery Sympoium-5 (2024) CY - Berlin, Germany DA - 23.09.2024 KW - Sodium ion batteries KW - Synthetic carbon anodes PY - 2024 AN - OPUS4-61944 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick A1 - Krug von Nidda, Jonas T1 - Porous „Ionophoric“ Carbon Materials: Synthesis Routes and Electrochemical Applications N2 - Porous carbon materials play an important role for energy storage and conversion, e.g., as fuel cell catalysts, supercapacitor or battery electrodes. Tuning porosity features such as pore connectivity, specific surface area, maximum pore size and pore volume is one of the key strategies to improve the performance of those materials.[1] Moreover, the alteration of the chemistry allows further enhancement in performance, even leading to the applicability in new fields. In this context, nitrogen doped carbons (NDCs) are a very promising material class. Highly porous NDCs for example show interesting Na-storage features.[2] Moreover, the integration of iron ions in an NDC, forming FeN4-sites, can results in materials with very promising properties as fuel cell cathode catalysts.[3] However, to relate certain sites to specific performance indicators is still challenging as the variation of the present N-sites is very large in typically obtained NDCs. In the past, we were able to develop an ionothermal synthesis strategy which results in highly porous materials with specific, i.e., tetrapyrrolic, N4-sites.[4] Such N4 sites and there metal complexes are reminiscent of biomolecules like the heme molecule, which originally inspired the research on such materials.[5] The N4-sites are mainly occupied by Zn2+ as the synthesis is performed in a ZnCl2-containing salt melt. Moreover, the electrochemical performance of those materials can be rather easily altered upon removing/exchanging the Zn2+. Moreover, again looking at biomolecules, those kind of materials can be regarded as ionophoric carbons as they possess distinct, metal-binding N4-sites embedded in a carbon matrix. Herein, we will focus on the synthesis of zeolitic imidazolate framework (ZIF) based NDCs with high porosity. We will discuss different strategies to remove and/or exchange Zn2+ in the obtained ZnN4-containing materials. Different analytical methods, e.g., physisorption (N2, Ar, CO2), XPS, XAS, and NMR, will be used to understand the alteration of morphological and chemical features upon ion exchange (see Figure 1). Figure 1: A) Schematic illustration of the partial Zn-removal in a ZnN4-containing, ionophoric carbon. B) High resolution N 1s XPS-results of a ZIF-derived ionophoric carbon before and after metal leaching. Due to the ion exchange/removal, the chemistry of the NDCs is altered, however, typically preserving the porosity features as well as the general structure of the N-motifs. Thus, the influence of the occupancy of the N4-sites on the electrochemical performance can be studied in detail. Finally, structure-property-relations of the different ZIF-derived ionophoric NDCs regarding the performance as anodes in sodium ion batteries will be discussed. T2 - Deutsche Zeolith-Tagung 2024 CY - Jena, Germany DA - 28.02.2024 KW - Ionophoric carbon KW - Sodium ion battery KW - PGM-free catalysts PY - 2024 AN - OPUS4-61955 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Sol-gel synthesis of porous boron- and nitrogen-doped carbon N2 - Carbon activation is intensively investigated due to a widespread utilization of activated carbons as sorbents, hosting and support materials owning to its high porosity and surface area. Activated carbons are increasingly considered also for electrochemical applications e.g. supercapacitors and metal-ion hybrid capacitors. Those devices usually employ activated carbon electrodes, where ions are stored by means of adsorption/desorption.[1] Meanwhile, in lithium-sulfur batteries, sulfur is loaded within activated carbon pores to confine insoluble intermediates.[2] The activation is normally proceeded in top-down or bottom-up strategies. Therein pore formation (porogenesis) occurs by reaction with steam, CO2, KOH, or the use of acidic agents. It is generally accepted, that the porogenesis mechanism is chemical leaching of carbon atoms. Recently, the sol-gel type synthesis of nitrogen-doped carbon in molten acids was presented, questioning the general validity of a leaching activation mechanism.[3] The protocol using inorganic salt melts (MgCl2 or ZnCl2) and organic precursors additionally generated N-functionalities. Interestingly, it can be noticed that the imprinting cations play a crucial role towards chemical structure of nitrogen-doped carbon framework. The coordinated geometry is well-known from phthalocyanine, a macrocyclic N-complexes (MN4-sites, where M is metal cation) which are desirable surface complexes, e.g. in electrocatalysis. The analogous phenomenon may be observed when using H3PO4 and H3BO3 agent via sol-gel chemistry.[4] Herein, the carbonization of mixtures of organic compound with H3PO4 and H3BO3 is investigated. Therefore, associated effects regarding the presence of P and B atoms within resulting nitrogen-doped carbons as well as the porogenesis mechanism are discussed. The understanding of moieties probably offers a new perspective of non-leaching carbon activation hence, provides a feasible pathway towards improved performances in electrochemical applications. T2 - Deutsche Zeolith-Tagung 2022 CY - Frankfurt am Main, Germany DA - 24.03.2022 KW - B-N-C KW - Boric acid activation PY - 2022 AN - OPUS4-61957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - DialySorb und Eigenschaften kommerzieller Zellen N2 - In dem Vortrag wurden zunächst die Eigenschaften erster kommerzieller Natrium-Ionen-Batterien vorgestellt, die an der BAM elektrotechnisch untersucht wurden und auf ihre Bestandteile hin analysiert wurden. Weiterhin wurden die aktuellen Projektergebnisse des BMBF-geförderten Verbundprojekts Dialysorb vorgestellt. T2 - KLiB-Gesprächsrunde zu Natrium-Ionen-Batterien und Festkörperbatterien CY - Frankfurt am Main, Germany DA - 09.07.2024 KW - Natrium-Ionen-Batterien PY - 2024 AN - OPUS4-61942 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Leveraging the Potential of Na-Ion-Batteries with Tailormade Anodes N2 - The concept of sodium-ion-batteries and their expected impact for the energy change is introduced, by explaining differences to lithium-ion-batteries. The challenge as well as the potential may be illustrated on the example of novel carbon anodes.While the general suitability is proven since the recent commercialization, limitations and detailed structure-performance relations remain topic to research. The progress in activities of BAM division 3.6 are illustrated further supporting the future impact of the technology. T2 - TechConnect Adlershof 2024: Sustainable Energy Future CY - Berlin, Germany DA - 09.11.2024 KW - Synthetic Carbon Anodes PY - 2024 AN - OPUS4-61947 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Porous Carbon Supported Ni or Co Single Atom Catalysts for Electrochemical Reduction of CO2 N2 - Isomorphous, but chemically unequal Ni-, Co- and Zn-N-C electrocatalysts are investigated for their electrocatalytic properties towards the electrochemical CO2 conversion. It turns out that Ni-N-Cs are clearly most favourable, because of the isomorphism to other catalysts, also clearly due to the NiN4 sites properties. T2 - Deutsche Zeolith-Tagung 2024 CY - Frankfurt am Main, Germany DA - 23.03.2024 KW - M-N-C catalysts KW - CO2 reduction PY - 2022 AN - OPUS4-61953 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fellinger, Tim-Patrick T1 - Research on Synthetic Anodes for Na-Ion-Batteries N2 - Carbons with an amorphous structure are currently revisited as candidates for Li- and Na-ion batteries. High irreversible capacities (due to SEI formation) were considered an intrinsic problem of such hard carbons, rendering them irrelevant for practical use. Amorphous carbon anodes would present safety-related advantages such as lower heat dissipation throughout lithiation per mol of lithium, mechanical stability throughout cycling and a larger set of optional electrolytes. T2 - Advanced Automotive Battery Conference Europe 2024 CY - Strasbourg, France DA - 13.05.2024 KW - Synthetic Carbon Anodes PY - 2024 AN - OPUS4-61956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geisler, J. T1 - The Influence of Interface Modification on Gassing of Sodium Ion Battery Anodes N2 - This flash talk will briefly introduce the DEMS method[3,4] and highlight a recent piece of our research from the DIALYSORB project. Fitting to the main topic of the conference, interfaces, we will present and the measurement technique to understand the side reactions occurring at this interface and recent data on anode materials with designed interface and interphase. T2 - Humboldt Universität zu Berlin CY - Berlin, Germany DA - 17.09.2024 KW - Gasing of Sodium KW - Ion Battery KW - Anodes PY - 2024 AN - OPUS4-60811 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -