TY - CONF A1 - Holtappels, Kai T1 - Trust in Hydrogen Technologies - Safety Issues in the Hydrogen Value Chain N2 - In June 2020, updated in July 2023, the German government presented the National Hydrogen Strategy (NHS), its first strategy for achieving the goals of its hydrogen policy. The NHS sets out a coherent framework for action for the future production, transportation and use of hydrogen and its derivatives, including the corresponding research, innovations and investments. Various measures have been defined to achieve goals such as the decarbonization of various sectors and the market introduction of hydrogen technologies. This will ultimately lead to the introduction of many “new” technologies in many areas of our daily lives, which will only be successful if decision-makers and the public are convinced that these technologies are safe. Therefore, the safety of hydrogen technologies is an important pillar in gaining and maintaining confidence in these new technologies. Safety must keep pace with, or better still, anticipate trends in technological development in order to avoid overly conservative and expensive safety solutions, and at the same time demonstrate the usability and safety of hydrogen. Otherwise, single incidents – not necessarily explosions – can easily lead to uncertainties and therefore to a decrease in trust and acceptance. The presentation will give an overview of how safety issues are addressed in Germany. T2 - Department Seminar - Public Lecture CY - Windhoek, Namibia DA - 12.09.2025 KW - Trustworthiness KW - Hydrogen value chain KW - Safety KW - Public lecture PY - 2025 AN - OPUS4-64438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Understanding the science and technology of hydrogen and clean energy projects N2 - As part of the Global African Hydrogen Summit, participating young people and students in Namibia and Africa learned how science and technological developments are interrelated and influence the development of a hydrogen infrastructure in Namibia. There is a global shortage of skilled workers, particularly in Namibia, who are needed now to build pilot plants and in the future to operate large-scale plants in Namibia. The presentation was intended to motivate the audience to pursue a relevant course of study and thus create prospects for the future. T2 - Global African Hydrogen Summit - Youth Programme CY - Windhoek, Namibia DA - 09.09.2025 KW - Science and technology KW - Open research topics KW - Skilled workers PY - 2025 AN - OPUS4-64437 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kröll, Mirco T1 - Tribological performance of polymer compounds in gaseous hydrogen N2 - In this study, friction and wear of conventional and alternative high performance polymer compounds, typically used for components of compressors, were investigated in gaseous hydrogen and nitrogen up to 80 bar of gas pressure. The compounds used were a commercial PEEK matrix with 10 wt.% each of PTFE, graphite, and short carbon fibres, a PPS matrix with 10 wt.% each of PTFE and graphite, and an experimental PA12 matrix with PTFE chemically coupled with an oleyl alcohol. Due to the cylindrical shape of the polymer samples, the contact area and pressure change if wear occurs. Therefore, experimental results of pre-screening tests have been used as input for FEM and an analytical model to determine the decreasing contact pressure over time. Afterwards, the outcome of the models was used to determine the duration of the experiments to reach typical contact pressures of seals in hydrogen compressors. T2 - ASMET TriboCorrosion International Conference 2025 CY - Vienna, Austria DA - 23.10.2025 KW - Hydrogen KW - Polymer KW - Tribometer KW - Comparability KW - Harmonisation KW - Oil-coupled compounds KW - Coefficient of Friction KW - Wear KW - FAIR data KW - Standardisation KW - Tribology KW - Database KW - i-TRIBOMAT PY - 2025 AN - OPUS4-64473 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Harwege, Finn A1 - Eberwein, Robert T1 - Testing of vacuum insulation panels for liquefied hydrogen storage tanks N2 - For the future use of liquefied hydrogen (LH2) as a green energy carrier, new concepts for storage tanks and in particular their insulation are necessary. The methodology applied in current LH2 tanks has some disadvantages while manufacturing and operation of large tanks that may be required in the future. While liquefied natural gas tanks exist in the necessary capacities, they are incompatible with LH2 due to its significantly lower storage temperature. In this paper, the possibility of using vacuum insulation panels (VIPs) as an alternative to the conventional double walled, powder filled vacuum insulation is presented. The two systems are introduced and compared on a conceptual level with a focus on the loss of vacuum failure mode. Furthermore, a test rig that enables the testing and quantification of thermal properties of VIP based insulations in ordinary and loss of vacuum conditions is presented. The test rig is a boil-off calorimeter using liquefied nitrogen and features a square cold surface with a side length of 3 m. An overview over the planned testing and its goals is given. KW - Liquefied Hydrogen KW - Insulation KW - Vacuum Insulation Panel KW - LH2 KW - Cryogenics PY - 2025 DO - https://doi.org/10.3303/CET2511612 SN - 2283-9216 VL - 2025 IS - 116 SP - 769 EP - 774 PB - AIDIC CY - Milano, Italy AN - OPUS4-63716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Nationale Allianz für Wasserstoff-Sicherheit N2 - Im Rahmen des jährlich stattfindenden BAM-UBA-Behörden-Erfahrungsaustauschs wurde vorrangig Mitarbeitenden aus örtlich zuständigen Vollzugs- und Genehmigungsbehörden die in Planung befindliche Nationale Allianz für Wasserstoff-Sicherheit vorgestellt. Die Allianz besteht aus insgesamt acht Institutionen mit einer breit aufgestellten Expertise zur Sicherheit von Wasserstoff und verfolgt das Ziel, die Entwicklung fehlender Methoden und Kriterien zur technischen Sicherheit von Wasserstoff voranzutreiben, Wissenslücken zu identifizieren und diese durch gemeinsame Forschung zu schließen sowie unabhängige und wissenschaftlich fundierte Bewertungen technischer Risiken bei Wasserstoffanwendungen vorzunehmen. T2 - BAM-UBA-Behördenerfahrungsaustausch CY - Berlin, Germany DA - 02.06.2025 KW - Wasserstoff KW - Sicherheit KW - nationale Allianz PY - 2025 AN - OPUS4-63429 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Chianese, Carmela A1 - Hajhariri, Aliasghar A1 - Eberwein, Robert A1 - Otremba, Frank A1 - Cozzani, Valerio T1 - Modeling the performance of multilayer insulation in cryogenic tanks undergoing external fire scenarios N2 - Multilayer Insulation (MLI) is frequently used in vacuum conditions for the thermal insulation of cryogenic storage tanks. The severe consequences of the degradation of such materials in engulfing fire scenarios were recently evidenced by several large-scale experimental tests. In the present study, an innovative modelling approach was developed to assess the performance of heat transfer in polyester-based MLI materials for cryogenic applications under fire conditions. A specific layer-by-layer approach was integrated with an apparent kinetic thermal degradation model based on thermogravimetric analysis results. The modeling results provided a realistic simulation of the experimental data obtained by High-Temperature Thermal Vacuum Chamber tests reproducing fire exposure conditions. The model was then applied to assess the behavior of MLI systems for liquid hydrogen tanks in realistic fire scenarios. The results show that in intense fire scenarios degradation occurs rapidly, compromising the thermal insulation performances of the system within a few minutes. KW - Multilayer Insulation KW - Cryogenic Vessels KW - Liquefied Hydrogen KW - Liquefied Natural Gas KW - Safety KW - Fire PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599418 DO - https://doi.org/10.1016/j.psep.2024.04.061 SN - 0957-5820 VL - 186 SP - 1169 EP - 1182 PB - Elsevier B.V. AN - OPUS4-59941 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Comparison of the sliding behavior of several polymers in gaseous and liquid hydrogen N2 - The development of hydrogen technologies entails high safety requirements in distribution and dispensing infrastructure. Therefore, it is necessary to pursue research on material compatibility in hydrogen, especially for critical parts with tribological issues. The focus of this study is to evaluate the influence of hydrogen on a wider range of commercially available polymer materials. Thereby, the friction and wear behavior of different grades of TPE, POM, PA66, PA12, PPA, PEEK, PPS, PTFE, PAI, PI and PBI were investigated against a rotating steel disk (AISI 304). Filled and unfilled polymers from different suppliers were evaluated at room temperature in air, vacuum and hydrogen gas (H2) as well as in liquid hydrogen at - 253°C (LH2). The sliding behavior of the polymer materials is discussed by means of surface analyses, whereby special attention is paid to the formation of a transfer film. According to the results at ambient temperature, the effect of hydrogen environment on the tribological behavior of neat polymers may be related to lack of moisture, but also to saturated hydrocarbons in gaseous hydrogen. In liquid hydrogen, the best tribological performances were achieved with neat PA polymers as well as PPS and PI composites. KW - Polymers KW - Composites KW - Sliding wear KW - Hydrogen KW - Cryogenic temperature PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-597123 DO - https://doi.org/10.2474/trol.18.217 SN - 1881-2198 VL - 18 IS - 5 SP - 217 EP - 231 PB - Japanese Society of Tribologists AN - OPUS4-59712 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Sicherheit von Wasserstoff und Wasserstofftechnologien N2 - Der Nationale Wasserstoffrat (NWR) hat in einem Online-Seminar das Thema Sicherheit von Wasserstofftechnologien und aktueller Sachstand bzw. Herausforderungen in Deutschland aufgearbeitet. Dazu wurde ein Behördenvertreter (BAM), zwei Forschungsinstitutionen (FzJ und FhG IWM) sowie eine benannte Stelle (TÜV) eingeladen und die vorgestellten Themen in einem offenen Plenum diskutiert. T2 - Online-Seminar des Nationalen Wasserstoffrats CY - Online meeting DA - 07.06.2024 KW - Wasserstoff KW - Sicherheit KW - Herausforderungen KW - Elektrolyse KW - Dichtungswerkstoffe KW - Sicherheitsabstände KW - Reallabor BAM TTS KW - Nationale Allianz Wasserstoff-Sicherheit PY - 2024 AN - OPUS4-61483 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Comparison of the sliding behaviour of several polymers in hydrogen N2 - The work presented here deals with the friction and wear behaviour of polymer materials in hydrogen. Commercially available grades of PEEK, PA, PPA, PAI, PI and PBI were investigated at room temperature in air and hydrogen gas (H2) as well as in liquid hydrogen at -253°C (LH2). T2 - 7th World Tribology Congress, WTC 2022 CY - Lyon, France DA - 10.07.2022 KW - Friction KW - Wear KW - Polymers KW - Hydrogen KW - Cryogenic PY - 2021 SP - 1 AN - OPUS4-62089 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Giannakopoulos, Antonios E. A1 - Zisis, Athanasios A1 - Zervaki, Anna D. A1 - Dimopoulos, Christos D. A1 - Platypodis, Efstathios A1 - Eberwein, Robert T1 - Effective elastic moduli and failure mechanisms of a random assembly of thin walled glass microbubbles N2 - In this work a methodology is presented to estimate the elastic properties and failure mechanisms of an assembly of random, brittle microbubbles. The approach is based on the mechanics of frictionless micro-contact between hollow spherical shells by employing relations from classical shell theory and verified by two dimensional axisymmetric Finite Elements. The estimated values are in agreement with available experimental values. Moreover, a granular type analytical homogenization model provides an isotropic elastic constitutive law to be used for the macroscopic deformation of an assembly of glass micro-bubbles when it is compressed by external loads. In addition, approximate estimates are also proposed for two important micro-failure mechanisms of such assemblies that relate either to the splitting or to the buckling of a brittle spherical shell, prior its complete crushing. The results are novel and are expected to enhance the application of glass microbubbles directly in acute thermal insulation problems such as liquid hydrogen storage. KW - LH2 KW - Cryogenic Vessels KW - Insulation PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634354 DO - https://doi.org/10.1016/j.ijsolstr.2025.113528 SN - 0020-7683 VL - 320 SP - 1 EP - 11 PB - Elsevier BV CY - Amsterdam AN - OPUS4-63435 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg W. A1 - Günzel, Stephan A1 - Saul, Herbert A1 - Bock, Robert T1 - Die volumenabhängige Druckbegrenzung als Maßnahme zur Konsequenzsteuerung im Wasserstofftransport N2 - Mit der technologischen Entwicklung werden auch die Transporteinheiten für Druckgase größer und die zu transportierenden Gase wie Wasserstoff deutlich über die lange als Standard geltenden 200 bar hinaus komprimiert. Damit steigt das Konsequenzpotenzial eines Zwischenfalls, das nun begrenzt werden soll, um die bisherige Praxis mit wenigen Zwischenfällen von den Maßnahmen für die neuen Entwicklungen extrem großer Transportdruckbehälter abgrenzen zu können. Hierzu wurde – ausgehend von einer technologisch und sicherheitstechnisch störenden Begrenzung des Volumens von Bergungsdruckgefäßen – das sogenannte Druck-Volumen-Produkt als Kenngröße und Konsequenzmaß vorgeschlagen. Um eine breit akzeptierte Abgrenzung der heute etablierten Druckgefäße gegenüber den zukünftigen Einheiten mit noch mehr Gasinhalt erarbeiten zu können, wurde eine Arbeitsgruppe bei den Vereinten Nationen eingerichtet, deren Weg zu ihrem Ergebnis „Einführung einer Obergrenze von 1.5 Mio. bar-Liter für das Druck-Volumen-Produkt von Druckgefäßen“ mit den Wasserstoff- spezifischen Einzelschritten „Grenze zwischen Großunfall und Katastrophe“, „Die Wirkung von Druckwellen auf den menschlichen Körper“, „Die Ausbreitung von Druckwellen“, „Der Referenzwert für die Bevölkerungsdichte“ und „Die Druckwellenberechnung“ hier dargestellt ist. Dieses Ergebnis der UN-Arbeitsgruppe wird bis 2027 zu einer verbindlichen Begrenzung des Druckvolumenproduktes in Druckgefäßen führen. KW - Risikosteuerung KW - Druck-Volumen-Produkt KW - Katastrophe KW - Bevölkerungsdichte KW - Druckwelle PY - 2024 SN - 2191-0073 VL - 14 IS - 05-06 SP - 8 EP - 17 PB - VDI Fachmedien GmbH & Co. KG CY - Düsseldorf AN - OPUS4-64309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine T1 - Polymer materials in hydrogen N2 - This presentation provides an overview of the applications and challenges related to polymer materials in hydrogen. The effects of hydrogen on polymers are described and test methods to evaluate the interactions between polymers and hydrogen are presented along with case studies. T2 - Masterstudiengang Wasserstofftechnologien DIU CY - Online meeting DA - 25.08.2023 KW - Hydrogen KW - Polymers PY - 2023 AN - OPUS4-61964 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sauer, Hannah A1 - Okpeke, Bright Ebikemefa A1 - Dzielendziak, Agnieszka Sylwia A1 - Batcke, Lars A1 - Eberwein, Robert A1 - Ehlers, Sören T1 - Comparative life cycle assessment of different vacuum insulation panel core materials for cryogenic storage tanks – with a focus on glass bubbles as a novel core material N2 - Developing a sustainable hydrogen supply chain is important in facilitating the energy transition towards climate neutrality. Hydrogen in its free form can be stored and transported either as a gas or a liquid. Due to gaseous hydrogen's comparatively low energy density, liquefied hydrogen (LH 2) is often preferred, especially with regard to long-distance transportation and storage in bulk. A notable challenge associated with LH2 is the inherent requirement to preserve it at a low temperature of -253°C. Consequently, the utilisation of thermally insulated tanks is necessary to minimise LH 2 evaporation. There is a lack of literature on the environmental impacts of insulation materials and concepts for cryogenic storage tank applications in the hydrogen supply chain. Hence, this study investigates a novel concept, namely vacuum insulation panels (VIPs), focusing on their core materials, with a view to assessing their environmental sustainability and circularity. A cradle-to-grave life cycle assessment (LCA) model is employed to investigate six distinct VIP core materials, namely, silica aerogel, rigid polyurethane foam, expanded perlite, glass fibre, fumed silica, and glass bubbles (hollow glass microspheres), with a special focus on the latter. The LCA results show that polyurethane foam and silica aerogel rank low in environmental performance, making them less suitable as primary choice. Expanded perlite is the most environmentally friendly material option, followed by glass fibre, glass bubbles, and fumed silica. Improvements to the environmental impact of glass bubbles can be achieved via the implementation of closed-loop recycling in their life cycle. T2 - The World Hydrogen Technologies Convention 2025 CY - Dublin, Ireland DA - 21.10.2025 KW - LH2 KW - Insulation KW - Life cycle assessment PY - 2025 UR - https://www.whtc2025.com/conference-proceedings SP - 65 EP - 67 AN - OPUS4-64668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Kompetenzzentrum H2Safety@BAM - Wir schaffen Vertrauen in Wasserstofftechnologien N2 - Im Rahmen des 4. Netzwerktreffens der Wasserstoffakteure im Landkreis TF und Region kamen auf Einladung der Bürgermeister der Gemeinden Baruth/Mark, Am Mellensee, Ludwigsfelde Akteure und Vertreter aus der Region zusammen, um den Aufbau einer Wasserstoffinfrastruktur zur wirtschaftlichen Förderung der Region zu diskutieren bzw. auch laufende Projekte vorzustellen. Die BAM hat ihre Wasserstoffaktivitäten auf dem BAM Testgelände Technische Sicherheit vorgestellt. T2 - 4. Netzwerktreffen der Wasserstoff-Akteure im Landkreis TF und Region CY - Glashütte, Germany DA - 26.05.2025 KW - Brandenburg KW - Netzwerk KW - Wasserstoffinfrastruktur PY - 2025 AN - OPUS4-63430 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hajhariri, Aliasghar A1 - Eberwein, Robert A1 - Camplese, Davide A1 - Emrys Scarponi, Giordano A1 - Otremba, Frank A1 - Cozzani, Valerio A1 - Seidlitz, Holger T1 - A Comprehensive Numerical Study of the Behaviour of an LH2 Storage Tank in the Event of a Fire N2 - As the world moves towards green energy production, effective storage and transportation solutions become essential. To support this transition, energy carriers with minimal or zero environmental impact are required. Liquified hydrogen represents a promising candidate due to its emissions-neutral properties. However, its highly flammable nature necessitates adherence to strict safety codes and standards. Storing hydrogen often requires advanced super-insulation materials. To enhance the safety of cryogenic hydrogen storage tanks under extreme conditions, such as those encountered during fire accidents, it is crucial to understand the thermal behaviour of the tank. Predicting pressurization and potential failure in advance demands a robust and comprehensive model. However, still such models suffer lack of detailed heat transfer models which account for various sub-processes during an accident scenario. Hence, this study introduces a comprehensive model for the pressurization of cryogenic tanks equipped with multi-layer insulation (MLI) systemsin the event of fire, which comprises several sub-models. These sub-models account for heat transfer phenomena through the thermal insulation at nominal conditions and its thermal degradation during fire exposure, the fluid, the internal pressurization, and the performance of the pressure relief valve. This study provides valuable insights into the safety and the behaviour of hydrogen storage tanks under thermal loads. KW - Heat transfer KW - Multi-Layer Insulation KW - Cryogenic KW - Liquid Hydrogen PY - 2025 DO - https://doi.org/10.3303/CET25116114 VL - 116 SP - 679 EP - 684 PB - AIDIC AN - OPUS4-63813 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cano Murillo, Natalia T1 - Effect of high-pressure hydrogen environment on the physical and mechanical properties of different kinds of carbon black filled elastomers. N2 - As the transition towards the usage of renewable energy is getting urgent, the fluctuations of clean energy production require efficient storage alternatives. Hydrogen offers not only the possibility of energy storage but also, acts as an energy carrier. It is then important to study the effect of highly pressurized hydrogen atmosphere on the materials destinated for its storage and transport, in order to assure the reliable performance of the sealing materials containing hydrogen. In this study, a set of carbon black (CB) filled rubbers comprising hydrogenated acrylonitrile butadiene rubber (HNBR), acrylonitrile butadiene rubber (NBR) and ethylene propylene diene monomer rubber (EPDM) was tested under high pressure hydrogen atmosphere (1000 bar) and at different temperature conditions: 120°C for HNBR, room temperature and 85°C for NBR and EPDM. The influence of hydrogen on the materials properties was measured after 7 days of exposure under hydrogen and evaluated again after 48h. Density and volume change, as well as hardness, tensile tests, compression set, dynamic mechanical measurements and infrared spectroscopy evaluations were conducted to estimate the impact of high-pressure hydrogen on the rubber grades. Our study reveals, an effect on the physical and mechanical properties, possibly related to small changes in the matrix-filler interaction after the hydrogen exposure. All materials, however, show a trend to recover most of their properties 48h after hydrogen exposure. T2 - RubberCon 2023 CY - Edinburgh, Scotland DA - 09.05.2023 KW - Elastomers KW - Hydrogen exposure KW - Mechanical properties PY - 2023 AN - OPUS4-62007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Eine Frage der Technik? Verfahren und Kriterien für den sicheren Betrieb von Wasserstoffanlagen N2 - Das Webinar wird im Rahmen von TransHyDE Systemanalyse (AP5.3 Akzeptanzbewertungen) durchgeführt und adressiert aus einer interdisziplinären Perspektive relevante Aspekte der Sicherheit und öffentlichen Risikowahrnehmung von Wasserstoffprojekten. Dabei erfolgt ein Überblick über Standards der sicherheitstechnischen Forschung, Einblicke aus der Projektkommunikation mit Akteuren und Bürger*innen sowie die Vorstellung aktueller Forschungsergebnisse zur öffentlichen Wahrnehmung der Risiken von Wasserstofftechnologien. Die Diskussion geht den u.a. Fragen nach, welche Rolle das Thema Sicherheit in der aktuellen Planungspraxis spielt, wie transparent über Risiken kommuniziert werden kann, ohne Vertrauen zu gefährden und welche Kommunikationsansätze sich als zielführend zeigen, um gesellschaftlichen Unsicherheiten zu begegnen. Der Vortrag zeigt auf, dass der sichere Betrieb von Anlagen nicht nur mit der Technologie alleine gewährleistet werden kann. T2 - Lunch Talk: Wasserstoff im Fokus: Sicherheit, Risikowahrnehmung und Kommunikation CY - Online meeting DA - 08.12.2025 KW - Gefahrenanalyse KW - Methoden KW - Kriterien PY - 2025 AN - OPUS4-65040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine T1 - Comparison of the sliding behaviour of several polymers in hydrogen N2 - The work presented here deals with the friction and wear behaviour of polymer materials in hydrogen. Commercially available grades of PEEK, PA, PPA, PAI, PI and PBI were investigated at room temperature in air and hydrogen gas (H2) as well as in liquid hydrogen at - 253°C (LH2). T2 - 7th World Tribology Congress, WTC 2022 CY - Lyon, France DA - 10.07.2022 KW - Friction KW - Wear KW - Polymers KW - Hydrogen KW - Cryogenic PY - 2022 AN - OPUS4-62087 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Systeme mit tiefkalt verflüssigten Gasen in Brandereignissen N2 - Die volumetrische Energiedichte eines Gases kann durch Verflüssigung erhöht wer-den. Diese findet statt, wenn das Gas unter den Siedepunkt abgekühlt wird. Verflüs-sigte Gase mit großer Bedeutung für die Energiewende sind verflüssigter Wasser-stoff (LH2) und verflüssigtes Erdgas (LNG), dessen Verflüssigung Temperaturen von unter -160 °C bedarf. Systeme zur Speicherung dieser verflüssigten Gase müssen in der Regel für Überdrücke ausgelegt sein und benötigen thermische Superisolierun-gen (TSI), um die tiefkalten Bedingungen über längere Zeit halten zu können und Verluste durch Boil-Off gering zu halten. TSI mit Vakuum und MLI oder Perlit sind für viele Anwendungen mit LNG und LH2 geeignet. Bei solchen Systemen handelt es sich in der Regel um doppelwandige Strukturen, bei denen die Innenwand mit dem tiefkalten Fluid in Kontakt steht. Die Lücke, zwischen der Innen- und der Außen-wand befindet sich unter Vakuumbedingungen und enthält zudem MLI oder Perlite. Diese Kombination von Isolationsmethoden ermöglicht es auf kleinstem Raum sehr gute thermische Isolationswirkung zu erreichen. Aus wirtschaftlicher Sicht sind die Systeme gut durchdacht. Das Wissen über das Verhalten dieser Systeme bei einem typischen Ereignis wie einem Brand ist jedoch begrenzt. Dieses Wissen ist aber not-wendig, um die Sicherheit der wachsenden Zahl von Anwendungen auf dem Markt bewerten zu können. T2 - H2-Kolloquium des Kompetenzzentrum „H2Safety@BAM” CY - Online meeting DA - 04.07.2022 KW - Tiefkalt KW - Verflüssigt KW - Isolation KW - Auslegungsüberschreitend PY - 2022 AN - OPUS4-55178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hajhariri, Aliasghar A1 - Eberwein, Robert A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank A1 - Seidlitz, Holger T1 - Non-combustible MLI based insulation behavior under fire condition - Experimental and numerical investigation N2 - The number of applications that demand zero-emission energy carriers, such as liquified hydrogen (LH2), is increasing worldwide. LH2 is typically transported or stored under cryogenic conditions. Storage in such conditions requires super thermal insulations which maintain very low boil-off for a prolonged time. Multi-Layer insulation (MLI) finds widespread use in cryogenic applications, designed to effectively restrict heat inleak towards cryogenic fluids. However, recent studies evidenced that exposure to high heat fluxes, such as in the event of a fire accident, can cause the thermal degradation of the insulation material, resulting in the severe collapse of its heat resistance performance. Therefore, the risk of rapid tank pressurization and its connection to the risk of BLEVE may be possible. This study proposes a numerical model to assess the performances of aluminum-based MLI materials under fire conditions. The model offers insights into the total heat transfer rate through the insulation, serving as a KW - Multi-Layer Insulation KW - Cryogenic KW - Liquid Hydrogen KW - CFD PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-617780 DO - https://doi.org/10.1016/j.psep.2024.11.037 VL - 193 SP - 603 EP - 620 PB - Elsevier B.V. AN - OPUS4-61778 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. A1 - Hajhariri, Aliasghar T1 - A modular concept for protection against debris flight - Design, properties and usage N2 - With advances in technological development, stationary and mobile storage units for compressed hydrogen are becoming larger and larger. Their number is also increasing. At the same time, their design has evolved from steel and aluminium to pressure vessels made of composite materials. For safety reasons the design approval of those composite cylinders requires fire engulfment tests, which are mainly organised as open-air tests always needs dedicated protection measures. Under some conditions those protections measures even reduce the effort for organisational safety measures if e.g. the emission of splinters can get totally prevented. Another aspect is the improved reproducibility of fire tests by reducing the influence of wind, especially wind turbulence. Between 2017 and 2019, BAM developed a stackable protective frame made of steel to safely capture splinters for the safe execution of high-energy impact tests. However, this frame was not flexible enough for the follow up project, which led to a completely new protection concept for (potentially) destructive tests on gas-filled pressure vessels. This concept is based on very robust building blocks with knobs and holes of a dimension of 1m x 0.5m x 0.5m made from welded steel. Despite their considerable weight of around 500 kg, they can be combined and stacked very easily like ‘Lego bricks’. The presentation will show the flexibility of the concept, some results of tests on the robustness against pressure waves and the effectiveness in wind attenuation. Finally, the interaction with a new, also modular burner concept for localised fires and full engulfment fires will be presented. T2 - 11th International Conference on Hydrogen Safety ICHS 2025 CY - Seoul, South Korea DA - 24.09.2025 KW - Splinter protection KW - Pressure vessel testing KW - Fire engulfment KW - Destructive tests KW - Rupture KW - Gaseous tests KW - Pressure wave KW - Test equipment KW - Precaution measures PY - 2025 AN - OPUS4-65099 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg W. T1 - Safety challenges of the hydrogen market ramp-up N2 - The presentation will provide some thoughts on the key safety challenges for staying safe during the market ramp-up phase of the rapidly expanding hydrogen economy. The focus is on storage aspects, but other topics are also covered. Each brief description of an aspect is followed by a proposal for solving the problem. Key words are safety aspects of hydrogen transport (CGH2 and LH2), risk control, consequence limitation, structural reliability control, safety monitoring through destructive and non-destructive testing, improvement of RCS through impact simulation, new approaches to safety assessment, outlook on the potential of NDT and digital product passports. T2 - 6th Germany–Korea Hydrogen Conference 2025 CY - Seoul, South Korea DA - 03.12.2025 KW - Risk-control KW - Regulatory measures KW - Operational safety KW - Mass transport KW - Full scale tests PY - 2025 AN - OPUS4-65102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Tugnoli, Alessandro A1 - Okpeke, Bright A1 - Campoari, Alessandro A1 - Zervaki, Anna T1 - NICOLHy - 2nd Stakeholder Advisory Board meeting N2 - The NICOLHy project aims to develop a novel insulation concept based on Vacuum Insulation Panels (VIP) that enables the safe, cost- and energy efficient storage of large quantities of LH2. Such large scale LH2 storage technology is necessary for establishing a hydrogen economy with dimensions between 40.000 m³ and more than 200.000 m³ of LH2. However, new design concepts are needed because the currently available technologies used in small and medium storages today are not suitable for up-scaling. The main problems prohibiting the up-scaling are the long production time due to the process chain, the low failure tolerance and the spherical shape, which reduces the payload in technical applications by up to 50% compared to other shapes. The novel concept will change these conditions by a system which is modular, open-form, time-and cost efficient while production, operation and service, multi-failure tolerant and applicable for onshore and offshore applications. The presentations shows details to the concept and presents several safety concerns the project has to deal with. This document contains all presentations from NICOLHys second Stakeholder Meeting. T2 - NICOLHy 2nd Stakeholder Meeting CY - Athens, Greece DA - 22.01.2025 KW - Liquefied hydrogen KW - Insulation KW - Tanks PY - 2025 AN - OPUS4-62564 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Camplese, D. A1 - Scarponi, G. E. A1 - Cozzani, V. A1 - Otremba, Frank T1 - Insulation Materials Used in Tanks for the Storage of Cryogenic Fluids in Fire Scenarios N2 - The importance of tanks for storing cryogenic fluids in the energy industry is increasing because of ongoing political conflicts and the implementation of more environmentally friendly energy sources. Key representatives for the application of cryogenic tanks are natural gas in the form of Liquefied Natural Gas (LNG) and hydrogen, e. g. in the form of Liquefied Hydrogen (LH2), for which significantly higher transport capacities can be achieved with the same transport volume using cryogenic storages than with storages based solely on overpressure. What applies to all cryogenic transported fluids in common is their condition that must be maintained. Hence heat flows into the preserved fluid must be minimized. Thermal super Insulations (TSI) based on e. g. multilayer insulations (MLI), perlites, and vacuum are utilized for this purpose and have already proven themselves in similar applications. However, for the use of tanks for cryogenic fluids in the transport sector, there is insufficient knowledge regarding the course and consequences of incidents, which is due to the still short period of use and the few documented incidents, hence few investigations carried out in this field. Typical scenarios in the transport sector represent car accidents with collisions, fires, and their combination, which are associated with extraordinary loads on the tank. The focus of this study is to investigate the behavior of TSI as a result of their thermal exposure to a heat source representing a fire. It is worth mentioning that this could lead to an increase of the heat flux into a tank by several orders of magnitude, and to permanent damage of the TSI, ultimately rapid release of flammable gas as well as a Boiling Liquide Expanding Vapour Explosion (BLEVE). For this purpose, a high temperature thermal vacuum chamber (HTTVC) has been developed that allows thermal loading of MLI or perlites in a vacuum and simultaneous measurement of heat flow through this TSI. The HTTVC is designed to represent realistic insulation conditions and to withstand thermal loads from typical design fires. The HTTVC was applied to investigate TSI based on MLI and vacuum. It is shown that the thermal stress caused permanent damage to the TSI, with shrinkage, phase change, pyrolysis, and condensation being significant damage mechanisms. The results are relevant for the evaluation of accident scenarios and can thus contribute to the improvement of TSI and the development of emergency measures for the protection of persons and infrastructures. T2 - ASME 2023 Pressure Vessels & Piping Conference (PVP2023) CY - Atlanta, Georgia, USA DA - 16.07.2023 KW - LH2 KW - LNG KW - MLI KW - Fire PY - 2023 SP - 1 EP - 8 PB - ASME AN - OPUS4-57973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hajhariri, Aliasghar ED - Eberwein, Robert ED - Perrone, Luca pakj ED - Cozzani, Valerio ED - Otremba, Frank ED - Seidlitz, Holger T1 - Study the Impact of Spacer at Thermal Degradation Process of MLI-based Insulation in Fire Condition N2 - To reduce carbon dioxide emissions, energy carries such as hydrogen consider to be a solution. Consumption of hydrogen as a fuel meets several restrictions such as its low volumetric energy density in gas phase. To tackle this problem, storage as well as transportation in liquid phase is recommended. To be able to handle this component in liquid phase, an efficient thermal insulation e.g., MLI insulation is required. Some studies have been revealed vulnerability of this type of insulation against high heat flux, for instance a fire accident. Some investigations have been depicted the importance of consideration of the MLI thermal degradation in terms of its reflective layer. However, limited number of studies have been focused on the thermal degradation of spacer material and its effect on the overall heat flux. In this study, through systematic experimental measurements, the effect of thermal loads on glass fleece, glass paper as well as polyester spacers are investigated. The results are reported in various temperature and heat flux profiles. Interpreting the temperature profiles revealed as the number of spacers in the medium increases, the peak temperature detectable by the temperature sensor on the measurement plate decreases. Moreover, the contribution of each individual spacer in all cases regarding the experimental temperature range is assessed to be around 8%. This value may increase to around 50% for glass paper and polyester spacers, and to around 25% for glass fleece spacers as the number of spacer layers increases up to six layers. To utilize the outcomes of the experiment later and integrate the results into numerical and CFD simulations, a model is proposed for the mentioned experimental temperature range up to 300°C to predict a heat flux attenuation factor. The model proposes a fitting factor that can reproduce the least square fitted line to the experimental data. T2 - 15th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions Naples (ISHPMIE) CY - Naples, Italy DA - 10.06.2024 KW - Multi-Layer Insulation KW - Cryogenics KW - Liquid Hydrogen KW - Heat Transfer KW - Hydrogen Storage PY - 2024 SP - 744 EP - 755 AN - OPUS4-60461 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank T1 - Lh2 Tanks In Fire Incidents - The Cryogenic High Temperature Thermal Vacuum Chamber Enables In-Depth Insights N2 - Liquefied Hydrogen (LH2) and Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Their storage requires tanks with thermal super-insulations to keep them at cryogenic conditions for a long time. These insulation systems have proven itself in various applications over a long time. However, these insulations are still new in land transportation, where accidents involving collisions, fires, and their combination are to be expected. This study summarizes the results of the ongoing research program in which insulations commonly used in industry were analysed through experimental and numerical studies under fire-like conditions. It was found that there are strong differences among the various insulation systems. Several safety concerns and research gaps exists for layered insulations, which are typically used in land transport. To further analyse these insulation systems, a new test concept called Cryogenic High Temperature Thermal Vacuum Chamber (CHTTVC) was developed and manufactured. This concept enables the testing of large insulation samples under industrial conditions and the consideration of cryogenic conditions relevant for the investigation of various phenomena. The results are important for the evaluation of accident scenarios, the improvement of thermal super-insulations, and the development of emergency measures. T2 - IMECE 2024 CY - Oregon, Portland, USA DA - 17.11.2024 KW - LH2 KW - LNG KW - Fire KW - Insulation KW - Safety PY - 2024 SN - 978-0-7918-8869-8 SP - 1 EP - 7 PB - ASME AN - OPUS4-61751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, D. A1 - Chianese, C. A1 - Scarponi, G. A1 - Eberwein, Robert A1 - Otremba, Frank A1 - Cozzani, V. T1 - Analysis of high temperature degradation of multi-layer insulation (MLI) systems for liquid hydrogen storage tanks N2 - The interest in hydrogen-based green energy is increasing worldwide, and the same is true for hydrogen-powered vehicles. Among the possible solutions to store hydrogen in such vehicles, cryogenic tanks equipped with multi-layer insulation (MLI) are the most promising to increase the amount of energy stored per unit volume. However, MLI is affected by severe deterioration when exposed to an external source of heat such as a fire following a car accident, leaving the tank unprotected and leading to failure in a relatively short time. In this work, a one-dimensional model to evaluate MLI thermal degradation when a liquid hydrogen tank is exposed to fire is presented. The relevance of taking MLI degradation into account when simulating the pressure increase due to external fire exposure is here demonstrated through the analysis of several case studies. The results show that MLI systems performance depletes within a few minutes of exposure to hydrocarbon poolfire. T2 - ICheaP 16 CY - Naples, Italy DA - 21.05.2023 KW - LH2 KW - MLI KW - Tiefkalt KW - Fire KW - Tank PY - 2023 SN - 2283-9216 VL - 2023 SP - 1 EP - 6 PB - AIDIC Servizi S.r.l. AN - OPUS4-57584 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Wasserstoff - Kryogene Anwendungen N2 - Wasserstoff wird als ein potenzieller alternativer Energieträger gesehen, mit dem die für 2050 gesetzten Klimaziele erreicht werden könnten. Der Transport von Wasserstoff ist mittels verschiedener Speichertechniken möglich, von denen der kryogene Transport mit den größten volumetrischen Energiedichten einhergeht. Hierdurch eignen sich diese Speicher besonders für die energieintensiven Verkehrsmittel im Land-, See- und Flugverkehr. Im Vortrag werden Speichertechniken, Gefahren im Umgang mit kryogenen Gasen sowie bisherige Störfälle dargestellt. Darauf aufbauend wird ein Teil der aktuellen Forschungsarbeit an der BAM vorgestellt, die die Sicherheit dieser Speicher unter außergewöhnlichen Belastungen adressiert. T2 - 26. Gefahrgutkongress Mecklenburg-Vorpommern CY - Rostock, Germany DA - 03.11.2022 KW - Wasserstoff KW - H2 KW - LNG KW - LH2 KW - Tank PY - 2022 AN - OPUS4-56181 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Camplese, D. T1 - Analysis of high temperature degradation of multi-layer insulation (MLI) systems for liquid hydrogen storage tanks N2 - The interest in hydrogen-based green energy is increasing worldwide, and the same is true for hydrogen-powered vehicles. Among the possible solutions to store hydrogen in such vehicles, cryogenic tanks equipped with multi-layer insulation (MLI) are the most promising to increase the amount of energy stored per unit volume. However, MLI is affected by severe deterioration when exposed to an external source of heat such as a fire following a car accident, leaving the tank unprotected and leading to failure in a relatively short time. In this work, a one-dimensional model to evaluate MLI thermal degradation when a liquid hydrogen tank is exposed to fire is presented. The relevance of taking MLI degradation into account when simulating the pressure increase due to external fire exposure is here demonstrated through the analysis of several case studies. The results show that MLI systems performance depletes within a few minutes of exposure to hydrocarbon poolfire. T2 - ICheaP 16 CY - Naples, Italy DA - 21.05.2023 KW - LH2 KW - MLI KW - Fire KW - Tank PY - 2023 AN - OPUS4-57553 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Tanks For The Large-Scale Transport And Storage Of Liquefied Hydrogen N2 - Hydrogen is seen as a potential energy source that enables us to achieve our climate targets. Hydrogen can be well integrated into the electrical energy infrastructure, and its production and use is free of direct GHG emissions. However, tanks are needed for worldwide storage and transportation, which need to be further developed and up-scaled. In the EU-funded NICOLHy project, BAM investigates a novel insulation concept based on Vacuum Insulation Panels (VIP) that enables the safe, cost- and energy-efficient storage of large quantities of LH2. Such large-scale LH2 storage technology is necessary to build tanks with capacities of 40.000 m³ to more than 200.000 m³ of LH2, as it is in application for LNG today. However, new design concepts are needed because the currently available technologies used in small and medium storages today are not suitable for up-scaling. The main problems prohibiting up-scaling are the long production time due to the process chain, the low failure tolerance, and the spherical shape of the tank, which reduces the payload in technical applications by up to 50% compared to other shapes. The novel concept will change these conditions by a system which is modular, open-form, time-and cost-efficient during production, operation and service, multi-failure tolerant and applicable for onshore and offshore applications. The NICOLHy consortium is ideally suited for this ambitious project. It brings together experts from the fields of thermodynamics, cryogenics, marine, chemistry, process, and safety engineering. Thereby, NICOLHy will accelerate the integration of hydrogen into the European energy economy and industry, which is necessary to be in line with the European Green Deal and to build trust of society in the policy and the technology. T2 - BAM Akademie H2 Safety - Colloquium CY - Berlin, Germany DA - 06.11.2024 KW - LH2 KW - Insulation KW - Liquefied Hydrogen KW - Tank PY - 2024 AN - OPUS4-61540 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Systems for the storage of cryogenic liquefied gases N2 - Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Its storage requires tanks with Thermal Super Insulations (TSI) to keep the transported fluid cold. The presentation includes 2 main topics of the department. First TSI has proven itself in various applications over a long time, but not in the land transport sector, where accidents involving collisions, fires, and their combination are to be expected. To analyze fire scenarios a High-Temperature Thermal Vacuum Chamber (HTTVC) was developed that allows the thermal loading of thermal insulation material in a vacuum and measuring the heat flow through the TSI in parallel. Within this chamber, 5 samples were tested regarding 3 different types of MLI, rock wool, and perlites. In the presentation, the results are presented. Second, the studying of accident scenarios enables the improvement of thermal superinsulation and to find novel insulation concepts. This is necessary for LH2 large-scale storages, for which state-of-the-art solutions are not suitable. Within the presentation, a novel insulation concept will be presented. T2 - Specialist Meeting - Threats to HAZMAT Pressure Vessels and BLEVE CY - Berlin, Germany DA - 25.04.2023 KW - Crygenic KW - LH2 KW - LNG KW - Fire KW - MLI PY - 2023 AN - OPUS4-57414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - LH2 Tanks In Fire Incidents - The Cryogenic High Temperature Thermal Vacuum Chamber Enables In-Depth Insights N2 - Liquefied Hydrogen (LH2) and Liquefied Natural Gas (LNG) establish themselves as important energy carriers in the transport sector. Their storage requires tanks with thermal super-insulations to keep them at cryogenic conditions for a long time. These insulation systems have proven itself in various applications over a long time. However, these insulations are still new in land transportation, where accidents involving collisions, fires, and their combination are to be expected. This study summarizes the results of the ongoing research program in which insulations commonly used in industry were analysed through experimental and numerical studies under fire-like conditions. It was found that there are strong differences among the various insulation systems. Several safety concerns and research gaps exists for layered insulations, which are typically used in land transport. To further analyse these insulation systems, a new test concept called Cryogenic High Temperature Thermal Vacuum Chamber (CHTTVC) was developed and manufactured. This concept enables the testing of large insulation samples under industrial conditions and the consideration of cryogenic conditions relevant for the investigation of various phenomena. The results are important for the evaluation of accident scenarios, the improvement of thermal super-insulations, and the development of emergency measures. T2 - IMECE 2024 CY - Portland, OR, USA DA - 17.11.2024 KW - LH2 KW - LNG KW - Fire KW - Insulation KW - Safety PY - 2024 AN - OPUS4-61752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, Davide A1 - Scarponi, Giordano Emrys A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Otremba, Frank A1 - Cozzani, Valerio T1 - Comparative performance assessment of multilayer insulation (MLI) systems for liquid hydrogen vessels in fire scenarios N2 - Multilayer Insulation (MLI) systems are a mature technology for cryogenic liquid hydrogen (LH2) tank thermal insulation. Recent tests evidenced that MLI materials may be damaged when exposed to fire, resulting in critical safety issues in the case of accidents. Thus, an innovative approach to the performance assessment of aluminum and polyester-based MLIs for LH2 tanks in fire scenarios was developed. A specific model integrating the hightemperature degradation of MLIs and the thermodynamic modeling of the tank lading was coupled to specific key performance indicators. Results of the analysis applied to a vehicle-scale tank equipped with 80 MLI layers indicate that MLI degradation and consequent tank failure may occur in less than 20 min for external shell temperatures above 1160 K in the presence of full engulfment, regardless of insulation used. Conversely, degradation does not occur earlier than 3600s below 603 and 928 K for polyester and aluminum-based MLI, respectively. KW - LH2 KW - LNG KW - Cryogenic storage tank KW - Fire KW - Insulation PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630841 DO - https://doi.org/10.1016/j.ijhydene.2025.04.534 SN - 0360-3199 VL - 135 SP - 537 EP - 552 PB - Elsevier Ltd. AN - OPUS4-63084 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Denora, Isabella A1 - Clute, Clara A1 - Murillo, Natalia Cano A1 - Theiler, Geraldine A1 - Balasooriya, Winoj A1 - Kaiser, Andreas A1 - Fasching, Michael A1 - Schwarz, Thomas A1 - Marano, Claudia T1 - A study on the mechanical behaviour of carbon black and Struktosil-filled NBR compounds for hydrogen applications N2 - This study investigates the effect of the addition of a 2D filler (Struktosil) to a carbon black-filled acrylonitrile butadiene rubber, developed for seals in hydrogen applications. Several characterization methods have been adopted. The addition of Struktosil increases the stiffness of the material up to a strain of about 100%, to a lesser extent in presence of a plasticizer. The dissipative response of the material is increased by Struktosil addition and decreased in presence of the plasticizer. Concerning fracture behaviour, the crack initiation and Rapid Gas Decompression (RGD) resistance were not affected by the addition of Struktosil but decreased in presence of plasticizer. Furthermore, the addition of Struktosil had a positive effect on crack propagation resistance. The effects of pressurized hydrogen exposure on physical-mechanical properties were also evaluated and correlated with the results. A correlation between fracture toughness and RGD resistance has been also attempted. KW - Acrylonitrile Butadiene rubber KW - Fracture mechanics KW - 2D filler KW - High-pressure hydrogen KW - Rapid gas decompression PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-648285 DO - https://doi.org/10.1016/j.ijhydene.2025.03.122 SN - 0360-3199 VL - 118 SP - 407 EP - 416 PB - Elsevier Ltd. AN - OPUS4-64828 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Holtappels, Kai T1 - Overview of hydrogen safety & remaining challenges in a green economy and energy transition N2 - In this talk, general aspects of the safety and acceptance of hydrogen technologies were presented. How can trust in new technologies be built when past accidents led to myths and fairy tales? The presentation does away with general prejudices and shows that handling hydrogen is neither more unsafe nor safer than handling other fuel gases. The basis for the safe handling of hydrogen is always a risk analysis. T2 - 6th SAF€RA Symposium - Safety in the new economy and energy transition CY - Rome, Italy DA - 19.05.2022 KW - Sicherer Umgang KW - Sicherheit KW - Wasserstoff Hydrogen KW - Safety PY - 2022 AN - OPUS4-54925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - National Alliance for Hydrogen Safety N2 - Hydrogen as an energy carrier offers the possibility of establishing a global and local CO2-neutral energy economy. The Hydrogen Clusters4Future bundle already existing expertise in the field of hydrogen technologies in and around Aachen with actors from Industry, Science and Society. All while considering the entire hydrogen life cycle – from production to storage and distribution to use. Safety is also an important issue and independant analysis on a national level is actually not possible in Germany. Other countries like the US and Canada established national safety alliances to offer support to companies and authorities. BAM, together with other independant institutes in Germany started to establish the National Alliance for Hydrogen Safety and presented this alliance to the community of the Hydrogen Clusters4Future. T2 - Aachen Hydrogen Colloquium CY - Aachen, Germany DA - 14.05.2024 KW - Hydrogen Safety KW - National Alliance KW - Networking PY - 2024 AN - OPUS4-61403 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Cano Murillo, Natalia A1 - Sawae, Y. A1 - Shinmori, H. A1 - Hashimoto, H. A1 - Aoyagi, A. A1 - Dobbelaar, E. T1 - Towards sustainable and hydrogen compatible sealing materials N2 - Materialien auf PTFE-Basis werden in der Regel als Kolbenringe in Hochdruck- und/oder kryogenem Wasserstoff verwendet. In diesem Projekt werden neu formulierte und nachhaltigere Polymerwerkstoffe mit herkömmlichen Materialien verglichen. Auf Grundlage der tribologischen Ergebnisse werden vielversprechende Kandidaten zusammen mit Reibungsmechanismen sowohl bei Hochdruck- als auch bei Niedrigtemperatur-Wasserstoff vorgeschlagen. T2 - 66. GfT Tribologie-Fachtagung 2025 CY - Wernigerode, Germany DA - 29.09.2025 KW - Wasserstoff KW - Reibung KW - Verschleiß KW - Kolbenring KW - Dynamische Dichtung PY - 2025 VL - 09 SP - 1 EP - 4 AN - OPUS4-64314 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schaad, C. A1 - Tiebe, Carlo A1 - Groth, Katrina M. T1 - A Framework for Transforming Process Control System Data from a Hydrogen Fueling Station into HyCReD Data N2 - Reliability data for hydrogen infrastructure components is essential for developing Quantitative Risk Assessment (QRA) for these technologies, which in turn is necessary for a safer deployment and expansion of the hydrogen market. However, there is currently a lack of hydrogen component reliability data available for these systems, thus limiting the usefulness of insights obtained from these QRA. The Hydrogen Component Reliability Database (HyCReD) has been proposed as a tool for reliability data collection and as a source for future QRAs. In this paper, we develop a digital tool that automatically processes data coming from Process Control System (PCS) in a hydrogen fueling station, detects the relevant failure events for hydrogen systems during its operation, and then logs the event information into HyCReD. To build this tool, we first categorized the station components in hydrogen service, their specific failure modes, and the specific failure mechanisms that are relevant to a QRA. Then, we identified the data available in the station PCS and the methods available for diagnosing the relevant failure events. The resulting tool is divided into three steps: (1) PCS data collection through an API, (2) data analysis for the detection and diagnosis of new failure events, and (3) logging that event into HyCReD. Finally, we discuss the potential for expanding the detection and diagnosis to more complex failure modes present in a hydrogen fueling station. This digital tool is set for implementation and validation on an experimental hydrogen fueling site. The goal for this digital tool is to be applicable to every kind of hydrogen fueling station and to be extendable to similar hydrogen technologies. T2 - 35th European Safety and Reliability Conference (ESREL2025) and the 33rd Society for Risk Analysis Europe Conference (SRA-E 2025) CY - Stavanger, Norway DA - 15.06.2025 KW - Reliability data KW - Hydrogen safety KW - HyCReD KW - Hydrogen Component Reliability Database KW - Hydrogen fueling station KW - Hydrogen refuelling station KW - HRS PY - 2025 UR - https://rpsonline.com.sg/proceedings/esrel-sra-e2025/html/ESREL-SRA-E2025-P6264.html SN - 978-981-94-3281-3 DO - https://doi.org/10.3850/978-981-94-3281-3-procd SP - 2663 EP - 2670 PB - Research Publishing CY - Singapore AN - OPUS4-63532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine T1 - An overview of tribology in gaseous Hydrogen N2 - In this presentation, an overview in gaseous hydrogen is given along with examples related to metal, coatings, polymers and rubbers materials. T2 - International Seminar, Hydrogen & Materials 2024 CY - Espoo, Finland DA - 06.06.2024 KW - Hydrogen KW - Friction KW - Wear KW - Materials PY - 2024 AN - OPUS4-61408 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo T1 - Hydrogen sensing - Sensors for safety and process control in Hydrogentechnologies N2 - The success of this energy transition and the efficient utilization of green hydrogen as a pristine energy carrier hinge upon the cultivation of hydrogen readiness, swift market expansion, and the establishment of crucial value chains within national and European contexts. Paramount to these objectives are reliable quality and safety standards, essential for ensuring supply safety, environmental compatibility, and instilling confidence in these technologies. In the realm of safety management systems, gas sensors emerge as vital components for detecting hydrogen. This presentation delves into the imperative role of hydrogen systems, emphasizing their capability to monitor and control operations, issue warnings, signal hazardous conditions, and sound alarms. It explores the intricate landscape of functional safety considerations and addresses the challenges associated with measurement uncertainty in sensor testing. A diverse array of sensors catering to hydrogen, pressure, temperature, and flow are available, each contributing significantly to the safety and efficiency of hydrogen technologies. Applications are envisaged to adhere meticulously to quality infrastructural regulations, codes, and standards, ensuring seamless integration and operation within the broader hydrogen ecosystem. This discussion underscores the ubiquitous presence of sensor systems across various fields within hydrogen technologies, illustrating their multifaceted contributions to safety, reliability, and overall success in realizing the transformative potential of green hydrogen. T2 - Summer School 2023 Characterization of micro- and nano-materials at BTU Cottbus CY - Cottbus, Germany DA - 11.09.2023 KW - H2Safety@BAM KW - Hydrogen KW - Sensor KW - Gas detection KW - Process control KW - Safety KW - Sensor testing PY - 2023 AN - OPUS4-59227 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Otremba, Frank A1 - Camplese, Davide A1 - Scarponi, Giordano E. A1 - Cozzani, Valerio A1 - Seidlitz, Holger T1 - Repeatable testing of a cryogenic storage tank with variable insulation material in fire like conditions N2 - For decarbonizing the energy industry and transport, cryogenic energy carriers have great potential. The storage takes place in tanks with thermal super-insulations, which are in application for decades, but there is only limited knowledge about its behaviour in a fire scenario. This represents a major incident that may generate extraordinary loads on the tank and its insulation system, and that eventually lead to a sudden tank failure. This paper presents a test rig called the Cryogenic High Temperature Thermal Vacuum Chamber (CHTTVC), which can be used to test typical thermal superinsulation’s under cryogenic and fire-like conditions in parallel. The test method makes it possible to measure the heat flow through the thermal superinsulation over time and to investigate the degradation behaviour of the insulation within a test. In the paper results from the first tests are presented. T2 - 18th Cryogenics 2025, IIR Conference CY - Prague, Czech Republic DA - 07.04.2025 KW - LH2 KW - LNG KW - Fire KW - Insulation KW - Safety PY - 2025 DO - https://doi.org/10.18462/iir.cryo.2025.0007 SP - 205 EP - 210 CY - Prag AN - OPUS4-63740 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hajhariri, Aliasghar A1 - Eberwein, Robert T1 - Cryogenic storage system behaviour under fire : A study of the insulation impact N2 - The transition from fossil fuels to low-emission alternatives is essential to mitigate carbon emissions in energy-intensive sectors. Liquid hydrogen (LH2) is a promising energy carrier due to its high gravimetric energy density, but its storage requires advanced insulation to minimize heat ingress and prevent excessive boil-off losses. Multilayer insulation (MLI), perlite, and microspheres are commonly used under vacuum conditions, yet their performance under fire exposure remains a critical concern. This study investigates the thermal degradation of insulation materials and its impact on heat transfer in an event with extreme thermal load conditions using the Cryogenic High-Temperature Thermal Vacuum Chamber (CHTTVC). The heat flow dynamics are analyzed, and an equivalent heat transfer coefficient is proposed to quantify the impact of insulation deterioration as the outer wall temperature increases. Additionally, a novel liquid-vapor interface monitoring method is introduced to improve real-time detection of phase changes within the tank. The results highlight that insulation failure substantially increases the heat flow, which, if not mitigated, can lead to boiling liquid expanding vapor explosions (BLEVE), jet fires, or catastrophic tank failure. The findings provide valuable insights into optimizing LH2 storage safety and improving emergency response strategies for cryogenic tanks exposed to extreme thermal conditions. T2 - 11th International Conference on Hydrogen Safety ICHS 2025 CY - Seoul, South Korea DA - 22.09.2025 KW - Multi-Layer Insulation KW - Cryogenic KW - Liquid Hydrogen KW - Heat transfer PY - 2025 AN - OPUS4-64200 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Repeatable Testing of a Cryogenic Storage Tank with Variable Insulation Material in Fire Like Conditions N2 - For decarbonizing the energy industry and transport, cryogenic energy carriers have great potential. The storage takes place in tanks with thermal super-insulations, which are in application for decades, but there is only limited knowledge about its behaviour in a fire scenario. This represents a major incident that may generate extraordinary loads on the tank and its insulation system, and that eventually lead to a sudden tank failure. This paper presents a test rig called the Cryogenic High Temperature Thermal Vacuum Chamber (CHTTVC), which can be used to test typical thermal superinsulation’s under cryogenic and fire-like conditions in parallel. The test method makes it possible to measure the heat flow through the thermal superinsulation over time and to investigate the degradation behaviour of the insulation within a test. In the paper results from the first tests are presented. T2 - 18th Cryogenics 2025, IIR Conference CY - Prague, Czech Republic DA - 07.04.2025 KW - LH2 KW - LNG KW - Fire KW - Insulation PY - 2025 AN - OPUS4-62979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Trust in Hydrogen Technologies - Safety Issues in the Hydrogen Value Chain N2 - In June 2020, updated in July 2023, the German government presented the National Hydrogen Strategy (NHS), its first strategy for achieving the goals of its hydrogen policy. The NHS sets out a coherent framework for action for the future production, transportation and use of hydrogen and its derivatives, including the corresponding research, innovations and investments. Various measures have been defined to achieve goals such as the decarbonization of various sectors and the market introduction of hydrogen technologies. This will ultimately lead to the introduction of many “new” technologies in many areas of our daily lives, which will only be successful if decision-makers and the public are convinced that these technologies are safe. Therefore, the safety of hydrogen technologies is an important pillar in gaining and maintaining confidence in these new technologies. Safety must keep pace with, or better still anticipate, trends in technological development in order to avoid overly conservative and expensive s T2 - 10th World Energy Congress (WEC 2024) CY - Singapore DA - 12.11.2024 KW - Hydrogen Safety KW - Trustworthiness KW - Safety research KW - Accidents PY - 2024 AN - OPUS4-62174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine A1 - Halder, Karabi A1 - Balasooriya, Winoj T1 - Effect of high-pressure hydrogen environment on the physical and mechanical properties of elastomers N2 - This paper deals with the exposure of HBNR rubbers to high pressure hydrogen (100 MPa) at 120 °C for 7 and 21 days under static conditions followed by characterization of their physical and mechanical properties. T2 - EHEC European Hydrogen Energy Conference 2022 CY - Madrid, Spain DA - 18.05.2022 KW - Rubbers KW - Hydrogen KW - Characterization PY - 2022 SP - 1 EP - 2 AN - OPUS4-62085 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harwege, Finn T1 - Testing of vacuum insulation panels for liquefied hydrogen storage tanks N2 - For the future use of liquefied hydrogen (LH2) as a green energy carrier, new concepts for storage tanks and in particular their insulation are necessary. The methodology applied in current LH2 tanks has some disadvantages while manufacturing and operation of large tanks that may be required in the future. While liquefied natural gas tanks exist in the necessary capacities, they are incompatible with LH2 due to its significantly lower storage temperature. In this paper, the possibility of using vacuum insulation panels (VIPs) as an alternative to the conventional double walled, powder filled vacuum insulation is presented. The two systems are introduced and compared on a conceptual level with a focus on the loss of vacuum failure mode. Furthermore, a test rig that enables the testing and quantification of thermal properties of VIP based insulations in ordinary and loss of vacuum conditions is presented. The test rig is a boil-off calorimeter using liquefied nitrogen and features a square cold surface with a side length of 2 m. An overview over the planned testing and its goals is given. T2 - 18th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bologna, Italy DA - 08.06.2025 KW - Liquefied Hydrogen KW - LH2 KW - Cryogenics KW - Vacuum KW - Vacuum Insulation Panel PY - 2025 AN - OPUS4-63426 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Markthochlauf von Wasserstofftechnologien - Vertrauen durch Sicherheit N2 - Beim BAM-UBA-Behördenerfahrungsaustausch 2022 hat die BAM zu dem Schwerpunktthema Wasserstoff den von der Bundesregierung avisierten Markthochlauf und das Thema Vertrauen durch Sicherheit vorgestellt. Dabei wurde das Kompetenzzentrum H2Safety mit seinen derzeitigen Aktivitäten ebenso vorgestellt wie sicherheitstechnische Fragestellungen, die über die Wertschöpfungskette hinweg derzeit existieren. Dabei handelt es sich um Fragestellungen zur Materialeignung und -kompatibilität, Leckageüberwachung, Schutzkonzepte und Unfallszenarien. Darüber hinaus gibt es Themen, die keinen direkten Bezug zur Sicherheit haben, aber das Vertaruen in Wasserstofftechnologien deutlich fördern können. Neben Aus- und Weiterbildungskonzepten wurden auch die Themen Akzeptanz und Risikokommunikation sowie Normung und Standardisierung behandelt. T2 - BAM-UBA-Behördenerfahrungsaustausch 2022 CY - Berlin, Germany DA - 27.06.2022 KW - H2Safety@BAM KW - Markthochlauf KW - Vertrauen PY - 2022 AN - OPUS4-55138 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harwege, Finn T1 - Testing of vacuum insulation panels for liquid hydrogen storage tanks N2 - Vacuum insulation panel (VIP) based insulation could present an alternative to the common double walled vacuum insulation for large liquefied Hydrogen (LH2) storage tanks. In this paper a brief introduction on VIPs and the envisioned design of VIP-based LH2-tank insulation is given. The design of a flat plate boil-off calorimeter for the testing of the insulation concept is shown, with regard to thermal design, mechanical design and instrumentation. Finally, an overview over the particular challenges for modelling VIP-based insulation and the proposed testing to be performed on the test rig is presented. T2 - 18th Cryogenics IIR International Conference CY - Prague, Czech Republic DA - 07.04.2025 KW - Liquefied Hydrogen KW - Insulation KW - Calorimeter KW - LH2 KW - VIP KW - Vacuum Insulation Panel PY - 2025 AN - OPUS4-62988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - New concepts in liquid hydrogen storage N2 - On the way to the energy transition, cryogenic fluids such as Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) are very important. They enable the large-scale economic transport and storage of energy as well as they represent alternative fuels for energy-intensive mobile applications such as aircrafts, ships and HGVs. For the last one, the number of vehicles and fuel stations has increased rapidly in the last 10 years all over Europe. Does this also entail new risks, for instance from a BLEVE in case of fires? To answer this question, BAM has conducted several research projects over the last decades and intensified the research recently with several experimental, numerical, and empirical outcomes on how a tank with insulation behaves in a fire. The presentation shows an overview of this research. The findings are relevant for global standardization procedures and to improve the overall safety in chemistry and technics. T2 - Hydrogen Refueling Station Opening CY - Baruth/Mark, Germany DA - 03.07.2025 KW - LH2 KW - Insulation KW - Fire KW - LNG KW - Safety PY - 2025 AN - OPUS4-63628 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nattuveettil, Keerthana T1 - Hydrogen safety- Dealing with Closed Spaces N2 - This work focuses on the detection and monitoring of hydrogen concentration in closed spaces, to improve safety by developing a sensor network-based leak detection system. This will help in prevention of accumulation of hazardous mixtures. Furthermore, the study details the implementation of a hydrogen sensor network within a container, analysing sensor placement, data collection, and safety improvements. T2 - SMSI 2025 CY - Nuremberg, Germany DA - 06.05.2025 KW - Sensor Network KW - Hydrogen safety KW - QI-Digital PY - 2025 AN - OPUS4-63199 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo T1 - Hydrogen sensing - Sensors for safety and process control in Hydrogentechnologies N2 - The success of this energy transition and the efficient utilization of green hydrogen as a pristine energy carrier hinge upon the cultivation of hydrogen readiness, swift market expansion, and the establishment of crucial value chains within national and European contexts. Paramount to these objectives are reliable quality and safety standards, essential for ensuring supply safety, environmental compatibility, and instilling confidence in these technologies. In the realm of safety management systems, gas sensors emerge as vital components for detecting hydrogen. This presentation delves into the imperative role of hydrogen systems, emphasizing their capability to monitor and control operations, issue warnings, signal hazardous conditions, and sound alarms. It explores the intricate landscape of functional safety considerations and addresses the challenges associated with measurement uncertainty in sensor testing. A diverse array of sensors catering to hydrogen, pressure, temperature, and flow are available, each contributing significantly to the safety and efficiency of hydrogen technologies. Applications are envisaged to adhere meticulously to quality infrastructural regulations, codes, and standards, ensuring seamless integration and operation within the broader hydrogen ecosystem. This discussion underscores the ubiquitous presence of sensor systems across various fields within hydrogen technologies, illustrating their multifaceted contributions to safety, reliability, and overall success in realizing the transformative potential of green hydrogen. T2 - Joint European Summer School 2023 on Fuel Cell, Electrolyser, and Battery Technologies CY - Vravrona, Greece DA - 17.09.2023 KW - H2Safety@BAM KW - SensRef KW - Hydrogen KW - KICstartH2 KW - Gas detection KW - Sensor testing KW - Hydrogen gas sensor PY - 2023 AN - OPUS4-59228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberwein, Robert A1 - Heßmann, Jennifer A1 - Werner, Jan A1 - Scarponi, Giordano Emrys A1 - Cozzani, Valerio A1 - Otremba, Frank T1 - Investigation of Realistic Fire Scenarios Involving Cryogenic Storage Tanks N2 - The number of vehicles using or transporting cryogenic fuels such as Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) increases fast in the land transportation sector. Does this also entail new risks for instance from a BLEVE? A key to answer this question is to research representative fires by its characterization and its effect on the insulation. At BAM’s technical test side in Germany, a test series was started to answer this question among others. This paper presents results on a pool fire under a colorimeter, that simulates a tank. The investigation points out, that the full fire characterization approach allows to represent the fire. The findings are relevant for the investigation of a representative design fire that is applicable for the approval and improvement of tanks as well as to research accident scenarios and their consequences. T2 - Loss Prevention 2025 CY - Bologna, Italien DA - 09.06.2025 KW - LH2 KW - LNG KW - Fire KW - Tank KW - Safety PY - 2025 DO - https://doi.org/10.3303/CET25116031 SN - 2283-9216 IS - 116 SP - 181 EP - 186 PB - AIDIC AN - OPUS4-63738 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo T1 - Error Prevention, Damage Prevention, and Safety Management in Hydrogen Technologies N2 - In order to integrate the error prevention and damage prevention strategy into hydrogen technologies, it is important to proactively look out for potential weaknesses in the systems and processes. This includes the implementation of preventive measures as elements of safety management in order to identify and eliminate potential sources of error. In addition, training should be specifically focussed on avoiding errors and the safe use of hydrogen technologies. The principial approach of a gas sensor testing laboratory shows how to ensure reliable results, it is advisable to conduct sensor testing under controlled conditions, focusing on identifying specific properties and quantifying performance criteria. A well thought-out strategy for error prevention makes a significant contribution to preventing accidents and increasing overall safety when using hydrogen. T2 - 5th Germany-Korea Hydrogen Conference CY - Halle (Saale), Germany DA - 22.10.2024 KW - Hydrogen KW - Safety KW - Safety Management KW - Error Prevention KW - Reference Procedure PY - 2024 AN - OPUS4-62563 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo A1 - Maiwald, Michael A1 - Schukar, Marcus T1 - Beiträge der Prozessanalytik und Sensorik zur Sicherheit in Wasserstofftechnologien N2 - Intelligent sensor systems, certified reference materials and instrumental analytical-chemical methods contribute to safety and functionality in hydrogen technologies. This article gives a brief overview of SensRef activities in the Competence Centre H2Safety@BAM on the issues: Analytical methods for the determination of hydrogen purity, certified reference materials as measurement standards with regard to gas quality (primary calibrators) of BAM, test methods for gas sensor systems to detect hydrogen in air as well as the application of fibre-optic sensor systems to monitor the expansion and ageing behaviour of composite containers in hydrogen technologies. T2 - Berlin Brandenburger Optik-Tag "Einsatz von Sensorik und Mikroelektronik in der Wasserstoffwirtschaft" CY - Online meeting DA - 29.11.2021 KW - H2Safety@BAM KW - SensRef KW - Gas analysis KW - Gas purity KW - Fibre-optic sensors KW - Sensor response KW - Certified reference materials PY - 2021 AN - OPUS4-54138 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo T1 - Introduction of H2Safety@BAM N2 - This contribution for the Open Forum of the 8th HSN Symposium introduces the SensRef activities of the Competence Centre H2Safety@BAM. T2 - 8. HSN-Symposium - HybridSensorNet e. V. CY - Online meeting DA - 11.11.2021 KW - H2Safety@BAM KW - SensRef KW - Hydrogen PY - 2021 AN - OPUS4-54137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine T1 - Effect of hydrogen pressure on the fretting behavior of elastomers N2 - In this study, the fretting behavior of several elastomer materials against 316L were evaluated in air and hydrogen environment up to 10 MPa. Furthermore, aging experiments were conducted for 7 days under static conditions in 100 MPa hydrogen and the physical and mechanical properties of the rubber materials were examined before and after hydrogen exposure. Fretting tests revealed that the wear of these compounds is significantly affected by the hydrogen environment compared to air, especially with NBR grades. After aging experiment, the friction response of HNBR grades is characterized by increased adhesion due to elastic deformation, leading to partial slip. T2 - 4th Int. Conf. on Polymer Tribology, PolyTrib 2022 CY - Stockholm, Sweden DA - 05.12.2022 KW - Hydrogen KW - Fretting KW - Elastomers PY - 2022 AN - OPUS4-62006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo T1 - Hydrogen Sensing - Sensors for Safety and Process Control in Hydrogen Technologies N2 - The success of this energy transition and the efficient utilization of green hydrogen as a pristine energy carrier hinge upon the cultivation of hydrogen readiness, swift market expansion, and the establishment of crucial value chains within national and European contexts. Paramount to these objectives are reliable quality and safety standards, essential for ensuring supply safety, environmental compatibility, and instilling confidence in these technologies. In the realm of safety management systems, gas sensors emerge as vital components for detecting hydrogen. This presentation delves into the imperative role of hydrogen systems, emphasizing their capability to monitor and control operations, issue warnings, signal hazardous conditions, and sound alarms. It explores the intricate landscape of functional safety considerations and addresses the challenges associated with measurement uncertainty in sensor testing. A diverse array of sensors catering to hydrogen, pressure, temperature, and flow are available, each contributing significantly to the safety and efficiency of hydrogen technologies. Applications are envisaged to adhere meticulously to quality infrastructural regulations, codes, and standards, ensuring seamless integration and operation within the broader hydrogen ecosystem. This discussion underscores the ubiquitous presence of sensor systems across various fields within hydrogen technologies, illustrating their multifaceted contributions to safety, reliability, and overall success in realizing the transformative potential of green hydrogen. T2 - Joint European Summer School JESS 2024 CY - Vravrona, Greece DA - 16.09.2024 KW - H2Safety@BAM KW - Hydrogen KW - Sensor KW - Sensor technology KW - Safety KW - Process control PY - 2024 AN - OPUS4-61677 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine T1 - Toward sustainable and hydrogen compatible sealing materials N2 - As sealing components, polymeric materials are used in a wide range of applications e.g. as O-rings and piston rings in high-pressure and/or cryogenic hydrogen. For these extreme demanding application, PTFE or PPS based materials are often used as high-performance polymer matrix. This project aims to provide a safe and sustainable sealing solutions for hydrogen applications. New materials with improved sustainability were investigated and compared with conventional grades. Tests were performed in hydrogen over a wide range of temperature and pressure (0.1 MPa to 40 MPa, and 100°C down to -150°C) at Kyushu University and BAM using a pin-on-disk apparatus in a continuous sliding motion. Polymer samples ran against 316L disk at 0.5 m/s and 3 MPa contact pressure. Based on the tribological results and surface analyses, promising candidates are suggested along with friction mechanisms in both high-pressure and low temperature hydrogen. T2 - STLE Meeting CY - Atlanta, Georgia, USA DA - 18.05.2025 KW - Hydrogen KW - Friction KW - Wear KW - Piston ring KW - Reciprocating seals PY - 2025 AN - OPUS4-63809 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bock, Robert T1 - Introduction Living Lab Hydrogen Refueling Station N2 - Die Bundesanstalt für Materialforschung und -prüfung (BAM) forscht und prüft für Sicherheit in Technik und Chemie an drei Standorten in Berlin, sowie auf dem Testgelände Technische Sicherheit in Horstwalde in Brandenburg. Hier haben wir weitreichende Möglichkeiten, Großversuche im Realmaßstab durchzuführen. Besonderes Augenmerk richten wir heute auf das Reallabor Wasserstofftankstelle. Diese voll digitalisierte technische Anlage, die die Wertschöpfungskette von Wasserstoff abbildet, wurde gerade eröffnet und steht nun Partnern aus Industrie und Forschung sowie kleinen mittelständischen Unternehmen oder Start-Ups zum gemeinsamen Forschen und Erproben neuer Technologie zur Verfügung. Ihre Besonderheiten umfassen z.B. eine umfassende Prozessüberwachung nach Industrie 4.0, die dafür nötige IT/OT Infrastruktur, Digitale Zwillinge auf verschiedenen Ebenen, großflächige Aufstellung und baulicher Schutz, Gas-Probenahmestellen auf dem Weg durch die Anlage und H2-Sensornetzwerke zur frühzeitigen Erfassung und Ortung von Leckagen. T2 - Sonderkolloquium H2safety@BAM CY - Berlin, Germany DA - 04.11.2025 KW - Wasserstoff KW - Reallabor KW - Digitalisierung PY - 2025 AN - OPUS4-64699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo A1 - Melzer, Michael T1 - Sensors for safety and process control in hydrogen technologies - Part II - Seminar about the expression of uncertainty in measurement N2 - The determination of the measurement uncertainty of quantitative and qualitative results is an important quality management tool, for example to describe measuring equipment, procedures, measurement results and the quality of products. The lecture presents the process description for the determination of the measurement uncertainty according to GUM, the determination of uncertainties in qualitative measurement results and the application of the measurement uncertainty for conformity assessment. T2 - Joint European Summer School 2021 on Fuel Cell, Electrolyser, and Battery Technologies CY - Online meeting DA - 12.09.2021 KW - Quality management tool KW - Measurement uncertainty KW - Quantiative results KW - Qualitative results KW - Conformity assessment PY - 2021 AN - OPUS4-54132 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo T1 - Sensors for safety and process control in hydrogen technologies N2 - Sensor systems are widely used in hydrogen technologies. The lecture presents requirements and properties of sensor systems and shows application examples of these technologies for safety and process control for hydrogen technologies. The focus is on gas sensors as well as sensors for pressure, temperature and gas flow. These systems are applied, among other things, for monitoring and control of operating conditions, indication of hazardous conditions and triggering of alarms. T2 - Joint European Summer School 2021 on Fuel Cell, Electrolyser, and Battery Technologies CY - Online meeting DA - 12.09.2021 KW - Sensor KW - Safety KW - Process control KW - Hydrogen technologies PY - 2021 AN - OPUS4-54131 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Theiler, Geraldine T1 - Comparative evaluation of the sliding performance of polymers materials in gaseous and liquid hydrogen N2 - The focus of this study is to evaluate the influence of hydrogen on the friction and wear behavior of a wide range of commercially available polymer materials. Thereby, Filled and unfilled polymers from different suppliers were evaluated at room temperature in air and hydrogen gas (H2) as well as in liquid hydrogen at - 253°C (LH2). T2 - 2023 Hydrogenius & I2CNER Tribology Symposium CY - Fukuoka, Japan DA - 03.02.2023 KW - Hydrogen KW - Tribology KW - Cryogenic KW - LH2 KW - Polymers PY - 2023 AN - OPUS4-61961 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harwege, Finn A1 - Schmidt, Heiko A1 - Eberwein, Robert T1 - Testing of vacuum insulation panels for liquid hydrogen storage tanks N2 - Vacuum insulation panel (VIP) based insulation could present an alternative to the common double walled vacuum insulation for large liquefied Hydrogen (LH2) storage tanks. In this paper a brief introduction on VIPs and the envisioned design of VIP-based LH2-tank insulation is given. The design of a flat plate boil-off calorimeter for the testing of the insulation concept is shown, with regard to thermal design, mechanical design and instrumentation. Finally, an overview over the particular challenges for modelling VIP-based insulation and the proposed testing to be performed on the test rig is presented. T2 - 18th Cryogenics IIR International Conference CY - Prague, Czech Republic DA - 07.04.2025 KW - Liquefied Hydrogen KW - Insulation KW - Calorimeter KW - Vacuum Insulation Panel KW - LH2 PY - 2025 SN - 0151-1637 DO - https://doi.org/10.18462/iir.cryo.2025.0010 SN - 978-2-36215-053-1 VL - 2025 SP - 168 EP - 174 PB - ICCEX CY - Prag AN - OPUS4-62959 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo T1 - Fehlervermeidung, Schadenverhütung und Sicherheitsmanagement in der Wasserstofftechnologie N2 - Um den Aspekt der Strategie zur Fehlervermeidung und Schadenprävention in Wasserstofftechnologien zu integrieren, ist es entscheidend, proaktiv auf potenzielle Schwachstellen in den Systemen und Prozessen zu achten. Dies beinhaltet die Implementierung von präventiven Maßnahmen als Elemente des Sicherheitsmanagements, um mögliche Fehlerquellen zu identifizieren und zu eliminieren. Darüber hinaus sollten Schulungen gezielt auf die Vermeidung von Fehlern und die sichere Anwendung von Wasserstofftechnologien ausgerichtet sein. Eine durchdachte Strategie zur Fehlervermeidung trägt wesentlich dazu bei, Unfälle zu verhindern und die Gesamtsicherheit bei der Nutzung von Wasserstoff zu erhöhen. T2 - Forum Schadenverhütung am 12.10.2023 der Arbeitsgemeinschaft Berlin Brandenburg (AGS) in Kooperation mit der AGBB Berlin e.V CY - Berlin, Germany DA - 12.10.2023 KW - H2Safety@BAM KW - Gassensorik KW - Wasserstoff KW - Fehlervermeidung KW - Schadenverhütung KW - Sicherheitsmanagement PY - 2023 AN - OPUS4-59226 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - The critical role of safety in hydrogen and energy projects across the continent N2 - Safety plays a critical role in the success and sustainability of hydrogen and energy projects across Africa, where the push for clean and renewable energy is rapidly gaining momentum. Given hydrogen’s flammability and the complex infrastructure required for its production, storage, and transport, strict safety protocols are essential to protect workers, communities, and the environment. In regions with developing regulatory frameworks, establishing robust safety standards and fostering a culture of safety is vital to attract investment, ensure public trust, and prevent accidents that could derail progress. Prioritizing safety not only safeguards lives but also supports the long-term viability and credibility of Africa’s emerging hydrogen economy. T2 - Global African Hydrogen Summit - Technical Seminar Programme CY - Windhoek, Namibia DA - 09.09.2025 KW - Safety KW - Namibia KW - Hydrogen infrastructure KW - Acceptance KW - Expert recommendations PY - 2025 AN - OPUS4-64435 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kästle, Emanuel A1 - Duffner, Eric A1 - Ghaznavi, Ali T1 - DAVID Project meeting 23.09.2025 N2 - Yearly report on the DAVID project, presented in front of the consortial partners. The report shows the progress achieved by the DAVID project team at BAM in terms of testing newly developed carbon-fiber reinforced pressure vessels of type IV. T2 - DAVID project meeting CY - Berlin, Germany DA - 23.09.2025 KW - Acoustic Emission KW - Pressure Vessels KW - DAVID project KW - Damage monitoring KW - Fiber reinforced polymers PY - 2025 AN - OPUS4-65289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Broichert, C. A1 - Klingenhof, M. A1 - Frisch, M. A1 - Dresp, S. A1 - Kubo, N.M. A1 - Artz, J. A1 - Radnik, Jörg A1 - Palkovits, S. A1 - Beine, A.K. A1 - Strasser, P. A1 - Palkovits, R. T1 - Particle size-controlled synthesis of highperformance MnCo-based materials for alkaline OER at fluctuating potentials N2 - For the large-scale generation of hydrogen via water electrolysis the design of long term stable and active catalysts for the oxygen evolution reaction (OER) remains a key challenge. Most catalysts suffer from severe structural corrosion that becomes even more pronounced at fluctuating potentials. Herein, MnCo based cubic particles were prepared via a hydrothermal approach, in which the edge length of the micron-sized particles can be controlled by changing the pH value of the precursor solution. The cubes are composed of varying amounts of MnCo2O4, CoCO3 and a mixed (Mn/Co)CO3 phase. Structure–activity relationships were deduced revealing a volcano-type behavior for the intrinsic OER activity and fraction of spinel oxide phase. A low overpotential of 0.37 V at 10 mA cm−2 and a stability of more than 25 h was achieved in 1.0 M KOH using a rotating disc electrode (RDE) setup. The best performing catalyst material was successfully tested under dynamic process conditions for 9.5 h and shows a superior catalytic activity as anode for the Overall water splitting in an electrolyser setup in 1.0 M KOH at 333 K compared to a reference NiCo-spinel catalyst. KW - Water electrolysis KW - Oxygen evolution reaction KW - Structure activity relationships PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-536050 DO - https://doi.org/10.1039/d1cy00905b SN - 2044-4753 VL - 11 IS - 12 SP - 7278 EP - 7286 PB - Royal Society of Chemistry AN - OPUS4-53605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis T1 - Safety in Energy Gases "Explosion Protection" N2 - The legal framework and standards for explosion protection are presented briefly and than the three basic principles of explosion protection are shown one by one: Avoiding Explosive Mixtures, Avoiding Ignition Sources and Mitigation of Consequences. For each of these the relevant safety characteristics and methods of implementation are shown. Finally references for Safety characteristic data and literature sources are shown and the safety characteristics of different fuel gases are summarized and compared. T2 - European Metrology Network for Energy Gases Training Session CY - Online meeting DA - 25.02.2026 KW - Safety characteristics KW - Energy carrier KW - Ignition KW - Safety PY - 2026 AN - OPUS4-65582 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rautenberg, Max A1 - Bhattacharya, Biswajit A1 - Witt, Julia A1 - Jain, Mohit A1 - Emmerling, Franziska T1 - In situ time-resolved monitoring of mixed-ligand metal–organic framework mechanosynthesis N2 - The mechanism of mixed-ligand metal–organic framework (MOF) formation, and the possible role of intermediate single-ligand metal complexes during mechanosynthesis, have not been explored yet. For the first time, we report here in situ real-time monitoring of the mechanochemical formation mechanism of mixed-ligand MOFs. Our results show that binary phases can act as intermediates or competing products in one-pot and stepwise synthesis. KW - Mechanochemistry KW - Metal-organic-frameworks KW - In situ X-ray diffraction KW - Mixed-ligand MOFs PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-558167 DO - https://doi.org/10.1039/D2CE00803C SP - 1 EP - 4 PB - Royal Society of Chemistry AN - OPUS4-55816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chakraborty, Gouri A1 - Das, Prasenjit A1 - Bhattacharya, Biswajit A1 - Prinz, Carsten A1 - Emmerling, Franziska A1 - Thomas, Arne T1 - Room-temperature superprotonic conductivity in COOH-functionalized multicomponent covalent organic frameworks N2 - In solid materials, the development of hydrogen bonding (H-bonding) networks within pores is crucial for efficient proton conductance. In this study, a chemically stable carboxylic acid-functionalized, quinoline-linked 2D microporous covalent organic framework (COF) (Qy-COOH) was synthesized using the Doebner multicomponent reaction (MCR) and compared to a similar framework lacking the –COOH functionality (Qy-H), prepared via an MC Domino reaction. The proton conductivity of the –COOH-functionalized MCR-COF was significantly enhanced, reaching 10−2 S cm−1, attributed to strong H-bonding interactions between water molecules and the dangling –COOH groups within the COF pores. In contrast, the analogous Qy-H framework exhibited a much lower proton conductivity of 10−5 S cm−1, while an imine-based COF showed only 10−6 S cm−1. This work represents the first demonstration of a general strategy to achieve efficient proton conduction in a class of layered 2D –COOH-functionalized COFs, offering superprotonic conductivity without requiring additives at room temperature. The MCR-COF design approach provides a promising pathway for developing highly stable and high-performance proton-conducting materials. KW - Multicomponebt KW - COF KW - Proton Conductivity KW - Superprotonic PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653526 DO - https://doi.org/10.1039/D5SC06953J SN - 2041-6520 SP - 1 EP - 9 PB - Royal Society of Chemistry (RSC) AN - OPUS4-65352 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bhattacharya, Biswajit A1 - Akhmetova, Irina A1 - Rautenberg, Max A1 - Emmerling, Franziska T1 - Mechanochemical synthesis of phosphonate-based proton conducting metal organic frameworks and hydrogen-bonded metal phosphonates N2 - Proton exchange membrane fuel cells (PEMFCs) are one of the most promising alternative green energy technologies that deliver high energy density without CO2 emissions. The proton conductivity of proton exchange membranes (PEM) contributes to the overall efficiency of a PEMFC. Materials being used as PEMs must exhibit high proton conductivity at the working conditions of the targeted PEMFC. To date, Nafion and Nafion-like polymers with acidic functionality are widely used as membrane materials due to their high proton conductivity in the range of 10-1 to 10-2 Scm-1 at higher relative humidity. However, these materials suffer from high costs, hazardous production process, and poor performance at high temperatures, limiting their versatility. In this context, crystalline porous materials are recognized as promising proton conductors for the proton exchange membrane (PEM) in fuel cell technology, owing to their tunable framework structure. However, it is still challenging bulk synthesis for real-world applications of these materials. Herein, we present mechanochemical gram-scale synthesis of series of mixed ligand metal organic frameworks (MOFs) and metal hydrogen‐bonded organic frameworks (MHOFs) using phenylene diphosphonic acid and 1-hydroxyethylidene-1,1-diphosphonic acid with different bipyridyl type of ligands, respectively. In all cases, the existence of extensive hydrogen bonds with amphiprotic uncoordinated phosphonate hydroxyl and oxygen atoms, the frameworks exhibited high proton conductivity. The study demonstrates the potential of green mechanosynthesis for preparations of framework-based proton conducting materials in bulk scale for green energy generation. T2 - 4th International Conference on Phosphonate Chemistry, Science and Technology, ICOPHOS-4 CY - Crete, Greece DA - 02.10.2023 KW - Proton exchange membrane fuel cells KW - Metal organic frameworks KW - Proton conducting materials PY - 2023 AN - OPUS4-58837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sauer, Hannah A1 - Okpeke, Bright E. A1 - Dzielendziak, Agnieszka S. A1 - Eberwein, Robert A1 - Baetcke, Lars A1 - Ehlers, Sören T1 - Comparative life cycle assessment of vacuum insulation panel core materials for liquid hydrogen storage tanks – glass bubbles compared to conventional core materials N2 - The environmental performance of insulation materials for liquid hydrogen storage tank application is important to the development of sustainable supply chains. As new materials keep evolving, there is a need to assess their environmental impact. Therefore, this study investigates the environmental sustainability and circularity of cryogenic insulation concepts, namely vacuum insulation panels (VIPs), exclusively focussing on their core materials. Employing a cradle-to-grave life cycle assessment model, the VIP core materials are investigated with a special focus on glass bubbles. Based on the results, the global warming potential of the considered core materials, namely, glass bubbles, silica aerogel, fumed silica, expanded perlite, glass fibre, and polyurethane foam is 9.21∗10^−2, 7.00, 2.50∗10^−1, 3.63∗10^−2, 6.68∗10^−2, and 1.88 kg CO2 eq. per functional unit, respectively. In general, silica aerogel and polyurethane foam are the least environmentally friendly materials, while the most sustainable is expanded perlite, followed by glass fibre, glass bubbles, and fumed silica. KW - LH2 KW - Insulation KW - Cryogenic storage tank KW - Life Cycle Assessment PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655445 DO - https://doi.org/10.1016/j.ijhydene.2026.153937 SN - 0360-3199 VL - 219 SP - 1 EP - 11 PB - Elsevier Ltd. AN - OPUS4-65544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Roy, Arkendu A1 - Kumar, Sourabh A1 - de Oliveira Guilherme Buzanich, Ana A1 - Prinz, Carsten A1 - Götz, Emilia A1 - Retzmann, Anika A1 - Hickel, Tilmann A1 - Bhattacharya, Biswajit A1 - Emmerling, Franziska T1 - Synergistic Catalytic Sites in High‐Entropy Metal Hydroxide Organic Framework for Oxygen Evolution Reaction N2 - AbstractThe integration of multiple elements in a high‐entropy state is crucial in the design of high‐performance, durable electrocatalysts. High‐entropy metal hydroxide organic frameworks (HE‐MHOFs) are synthesized under mild solvothermal conditions. This novel crystalline metal–organic framework (MOF) features a random, homogeneous distribution of cations within high‐entropy hydroxide layers. HE‐MHOF exhibits excellent electrocatalytic performance for the oxygen evolution reaction (OER), reaching a current density of 100 mA cm−2 at ≈1.64 VRHE, and demonstrates remarkable durability, maintaining a current density of 10 mA cm−2 for over 100 h. Notably, HE‐MHOF outperforms precious metal‐based electrocatalysts despite containing only ≈60% OER active metals. Ab initio calculations and operando X‐ray absorption spectroscopy (XAS) demonstrate that the high‐entropy catalyst contains active sites that facilitate a multifaceted OER mechanism. This study highlights the benefits of high‐entropy MOFs in developing noble metal‐free electrocatalysts, reducing reliance on precious metals, lowering metal loading (especially for Ni, Co, and Mn), and ultimately reducing costs for sustainable water electrolysis technologies. KW - Electrocatalysis KW - Green Hydrogen PY - 2024 DO - https://doi.org/10.1002/adma.202408114 SP - 1 EP - 14 PB - Wiley AN - OPUS4-61739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Czeskleba, Denis A1 - Rhode, Michael A1 - Wandtke, Karsten A1 - Irfan, Muhammad Dary A1 - Kannengiesser, Thomas T1 - Hydrogen diffusion in thick-walled S690 saw joints: part 1—experimental determination of microstructure-dependent diffusion coefficients N2 - High-strength low-alloyed steel S690 is widely used in heavy-duty applications, such as structural components, mobile cranes, and industrial plant construction, owing to their high strength and weldability. However, thick-plate submerged arc welding (SAW) can introduce elevated hydrogen levels and residual stresses that promote time-delayed hydrogen-assisted cold cracking (HACC). Accurate, microstructure-specific diffusion data are scarce, limiting predictive HACC assessments. This study presents an experimental determination of hydrogen diffusion coefficients (DH) in two S690 variants: thermomechanically rolled (S690MC) and quenched and tempered (S690Q). Multi-layer SAW welds were produced from 30 mm thick plate material at three heat input levels, and diffusion membranes were extracted from weld metal (WM), heat-affected zone (HAZ), and base material (BM). Hydrogen permeation tests, conducted in accordance with DIN En ISO 17081, yielded flux curves normalized in time from which DH was derived using the inflection-point method. At room temperature, DH values ranged from 6 × 10−5 mm2/s to 9 × 10−5 mm2/s across all regions and heat inputs, with no significant difference between S690MC and S690Q. Weld metal exhibited marginally lower DH, attributed to enhanced hydrogen trapping, while base material measurements showed greater variability. These microstructure-resolved diffusion coefficients add quantitative data for modern S690 SAW welds and provide internally consistent input parameters for the numerical simulations presented in part 2. The results support improved parameterization for subsequent assessments of HACC risk through the optimization of welding parameters. KW - Hydrogen assisted cracking KW - Submerged arc welding KW - Diffusion KW - Electrochemical permeation KW - Microstructure PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655711 DO - https://doi.org/10.1007/s40194-026-02400-7 SN - 0043-2288 SP - 1 EP - 15 PB - Springer Science and Business Media LLC AN - OPUS4-65571 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Czeskleba, Denis A1 - Rhode, Michael A1 - Wandtke, Karsten A1 - Irfan, Muhammad Dary A1 - Kannengiesser, Thomas T1 - Hydrogen diffusion in thick-walled S690 SAW joints: part 2 – predictive modeling of heat input and microstructure influence N2 - High-strength low-alloy (HSLA) steels such as S690 are widely employed in thick-walled welded structures, where hydrogen-assisted cold cracking (HACC) remains a persistent concern. While microstructure-specific hydrogen diffusion coefficients (DH) for weld metal (WM), heat-affected zone (HAZ), and base material (BM) were experimentally established in Part 1 of this study, their quantitative influence on hydrogen accumulation and effusion has not yet been fully clarified. This work presents a transient, spatially resolved numerical model for simulating hydrogen transport in multi-pass submerged arc welds. The model integrates experimentally determined DH values with realistic thermal cycles and temperature-dependent boundary conditions. Developed in Python, the simulation tool is purpose-built for hydrogen diffusion in welded joints. It offers a focused, transparent alternative. It offers a focused, transparent alternative to general-purpose finite element platforms. Parametric analyses demonstrate that, although the diffusion coefficients vary by up to 50%, their impact on overall hydrogen retention is minor. In contrast, plate thickness, bead geometry, cooling time (t₈/₅), and interpass temperature exert a dominant influence on hydrogen distribution. Despite clear microstructural differences between the thermomechanically rolled (S690MC) and quenched and tempered (S690Q) variants, including opposite HAZ hardness responses (softening in S690MC, hardening in S690Q) in the (pen)ultimate weld bead, the simulations confirm that their diffusion behavior and hydrogen solubility are closely aligned. Consequently, differences in DH and solubility exert only a minor influence on hydrogen retention compared to thermal exposure and joint geometry. These findings support the interchangeable use of both steel grades in terms of HACC risk due to hydrogen diffusion kinetics under comparable welding conditions. KW - Hydrogen assisted cracking KW - Numerical simulation KW - Diffusion KW - Submerged arc welding PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655721 DO - https://doi.org/10.1007/s40194-026-02395-1 SN - 0043-2288 SP - 1 EP - 16 PB - Springer Science and Business Media LLC AN - OPUS4-65572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bayat, Mehmet Emin T1 - Traceable dynamic and gravimetric preparation of trace ammonia in hydrogen gas standards for ISO 14687 N2 - Trace ammonia impurities in hydrogen fuel poison proton-exchange-membrane fuel cells (PEMFC), causing irreversible performance degradation. Accurate quantification of ammonia in so-called Grade D hydrogen fuel is crucial for ensuring PEMFCs long-term operational stability and performance. According to ISO 14687 grade D hydrogen fuel sets a stringent threshold value of just 100 nmol/mol for ammonia impurities. Given the potential of an ammonia-based hydrogen supply chain, reliable quantification of ammonia contamination appears even more relevant. Hydrogen quality assessments for ammonia impurities typically employ techniques such as gas chromatography, cavity-enhanced absorption spectroscopy, or mass spectrometry. These techniques, however, require stable reference gases for calibration and long-term method validation. Typically, gravimetrically produced reference gases are used. However, ammonia poses unique challenges due to its chemical reactivity and stickiness. By applying (ultra )long-path Optical Feedback Cavity Enhanced Absorption Spectroscopy we observed that above a certain amount of ammonia, the gravimetric amount deviates from the analytically determined amount. This discrepancy most likely arises due to strong adsorption of ammonia onto the inner surface of the gas cylinder. Therefore, we investigated the lowest gravimetrically preparable amount of ammonia in hydrogen for which the analytically measured amount of the cylinder remains congruent with the gravimetric amount of substance. We further investigated the applicability of passivated cylinders for trace ammonia gas standards and compared their performance to aluminum alloy cylinders. To confirm reproducibility of our results, we conducted three independent gravimetric preparation campaigns, each employing optimizations, or changes in methodology, at different times. Finally, we investigated whether those gravimetrically prepared trace amounts of ammonia in hydrogen gas standards were long-term-stable. Beyond gravimetrically prepared gas standards, we evaluated how a cutting-edge dynamic dilution system could reliably extend trace-ammonia calibration down to the ISO limit of 100 nmol/mol. For this purpose, we developed an advanced dynamic dilution system capable of a one-in-a-billion dilution ratio, validated for its SI traceability, reproducibility, and operational limits by applying an internal standard. In summary, our results demonstrate that precise dynamic dilution, coupled with concentrated gravimetrically prepared ammonia gas mixture, provides a route to full SI-traceable trace-ammonia reference sample gases. T2 - Gas Analysis Symposium 2026 CY - Paris, France DA - 27.01.2026 KW - Ammonia KW - Hydrogen KW - Gravimetric preparation KW - OF-CEAS KW - ISO 14687 PY - 2026 AN - OPUS4-65620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ekici, Nilsah A1 - Sobol, Oded T1 - SHIMMER Database for Hydrogen Integration in European Gas Grids N2 - The integration of hydrogen into existing natural gas infrastructure is an important pathway for achieving the European Union’s climate neutrality goals. However, hydrogen blending in gas networks raises technical challenges related to material compatibility, operational safety, and the lack of harmonized assessment methodologies across Europe. These challenges are addressed within the Safe Hydrogen Injection Modelling and Management for European Gas Network Resilience (SHIMMER) project, funded by the Clean Hydrogen Partnership under the Horizon Europe programme. A key outcome of the project is the development of an openly accessible database designed to support the assessment of hydrogen readiness in European gas networks and to facilitate knowledge sharing. The database compiles infrastructure data provided by project partners, including several European transmission and distribution system operators. It contains detailed information on gas network components such as pipelines, valves, fittings, gaskets, and compressors. In addition, a new category has been introduced focusing on the hydrogen compatibility of gas grid components and materials. This section provides structured information linking infrastructure components with material types and their hydrogen compatibility, enabling more systematic evaluation of hydrogen injection scenarios. By organizing heterogeneous datasets into a harmonized and user-friendly structure, the SHIMMER database supports research, best-practice development, and the safe integration of hydrogen into existing European gas infrastructure. T2 - EHEC 2026 CY - Seville, Spain DA - 11.03.2026 KW - Database KW - Gas Grid KW - Hydrogen KW - Low-carbon KW - Pipeline Steel PY - 2026 AN - OPUS4-65683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rhode, Michael T1 - Determination, Assessment and Quantification of Hydrogen in Multi-pass / Multi-layer Weld Joints by Adapted ISO 3690 Samples - DEAQuade - N2 - High-strength, low-alloy (HSLA) structural steels, such as S690 and higher grades, are used in numerous applications, enabling sustainable, lightweight structural construction. However, the welded joints of these steels can be susceptible to hydrogen-assisted cold cracking (HACC), especially in the hardened weld metal (WM) or heat-affected zone (HAZ). HACC in high-strength welds basically involves a critical combination of local, mutually dependent parameters consisting of: (1) a crack-critical microstructure; (2) sufficiently high mechanical stress; and (3) a diffusible hydrogen concentration (HD). In this context, thick-walled steel weld joints typically involve multi-layer welding with several passes. This leads to an effective, empirically known reduction in the global HD in the weld seam. This reduction is due to the repeated reheating of subsequently welded beads or layers, which reduces the local HD in the individual weld beads or layers. However, this has not yet been adequately quantified or described. Bead-on-plate tests, such as ISO 3690, cannot correctly reproduce the local HD distribution in individual welding passes (and thus, the global HD in the entire seam). Therefore, these tests lead to an extremely conservative evaluation of hydrogen ingress and the potential for "self-reduction" of HD due to increased interpass temperature during multi-layer welding, which has not yet been adequately addressed in the literature. Ideally, the local HD in each pass and the global (average) HD of the multi-layer weld would be known immediately after welding. For this reason, the study proposes an approach to address the local, track-, and layer-dependent, as well as global, hardness (HD) of multi-layer welds via a modified ISO 3690 test. To this end, representative welding parameter combinations for selected practical welding processes (e.g., SAW, GMAW, or SMAW) will be carried out as conventional bead-on-plate samples. These samples will be systematically extended by an increasing number of welding passes. Several sample series with an increasing number of beads or layers will be examined. Additionally, the initial HD is varied by methods such as targeted shielding gas variation (e.g., addition of hydrogen in GMAW) or moistened flux/coating (e.g., SAW/SMAW). Based on experimental data (temperature field measurements during welding and determination of temperature-dependent HD coefficients), a numerical hydrogen diffusion model is created. This model calculates the local HD (in the beads) and the HD across the weld cross-section. Additional variation calculations represent heat transfer conditions that were not recorded experimentally and their influence on HD distribution. Finally, we investigate the potential use of the modified ISO 3690 multi-layer geometry for application cases such as (1) predicting the effectiveness and necessity of hydrogen removal heat treatment procedures for given welding parameter sets and (2) extending the HD classification definition (e.g., allowing HD10 use for HSLA steels with RP0.2 > 690 MPa instead of HD5). Finally, an international round robin should be initiated once the concept has been successfully confirmed and verified. T2 - IIW Intermediate Meeting, Com. II-A CY - Bangkok, Thailand DA - 17.03.2026 KW - Hydrogen assisted cracking KW - Multi-pass welding KW - Diffusion KW - Cold cracking test PY - 2026 AN - OPUS4-65716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Roy, Arkendu T1 - Hydroxide Based High Entropy MOF for Oxygen Evolution Reaction N2 - The energy crisis becomes more prominent in higher altitude countries like Germany, with higher annual energy demand. Thus, the generation of higher energy density fuel like hydrogen from renewable resources become the only way to solve the zero-emission energy system while avoiding the expensive batteries as an energy storage option. Therefore, water electrolysis cells to produce hydrogen and oxygen by storing of solar/wind energy in chemical bonds is a fruitful alternative for renewable and long-term energy generation. Thus, designing inexpensive water-splitting electrocatalyst material becomes a field of research of utmost importance. High entropy metal hydroxide organic frameworks (HE-MHOFs) are composed of high entropy hydroxide layer inside MOFs, resulting in a high degree of structural complexity and diversity than conventional MOFs. The concept of ‘high entropy’ refers to multiple types of metal ions (Metal = TM) in a near equimolar ratio in the same framework, creating a high degree of disorder and many possible structural configurations. Here, the HE-MHOF successfully synthesized by a conventional solvothermal process, crystallizes in the single phase with significant lattice distortion. A special-quasi-random (SQS) structure was simulated with equimolar compositions (~20% TM = Mn, Co, Ni, Cu and Zn) and a comparison was made with the ICP-AES (inductively coupled plasma atomic emission spectroscopy), XANES (X-ray absorption near edge structure) and XAFS (X-ray absorption fine structure) observations. Further, the elemental mapping (Energy dispersive Spectroscopy) of HE-MHOF shows the presence of all five different metals in the same crystallite to substantiate the ‘high entropy’ state of the MOF. The HE-MHOF offers improved thermal stability than mono-metallic MHOF and exhibit unique properties compared to traditional monometallic (Ni2+) MOF variants. Firstly, to elucidate the effect of the multimetallic system on the catalytic performance, we have performed density functional theory (DFT) calculations to investigate pre-redox cycles involved in the catalytic activation of HE (and Ni)-MOFs. HE-MHOF is further investigated as an electrocatalyst for oxygen evolution reaction (OER) due to its special high entropy hydroxide layered structure and electronic properties. Our DFT results have examined the traditional proton-coupled electron transfer (PCET) steps involving the single transition-metal site. The scrutiny of d-band centers and their behaviour in catalytic upgradation is investigated with density of states (DOS) analysis. It exhibits outstanding performance towards oxygen evolution reaction (OER) comparable to the experimental findings, which is also comparable to state-of-the-art OER catalysts based on precious metals such as iridium oxide and platinum carbon. We have considered different electrolyte solutions to elucidate the fast kinetics oxygen evolution reaction in the presence of various external nucleophilic anions. In hydroxyl-based MOFs, electrolytes' influence can substantially enhance catalytic activities. Here, with the help of DFT simulations, we have investigated the effect of the nucleophilicity of anion on each elementary reaction involved in the PCET mechanism of OER. T2 - EuroMOF 2023 CY - Granada, Spain DA - 24.09.2023 KW - Metal-organic Framework KW - High Entropy Materials KW - Electrocatalysis PY - 2023 AN - OPUS4-58971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gugin, Nikita T1 - Large-Scale Synthesis of ZIF-8 for Hydrogen Storage: Batch and Continuous Modes N2 - We report the scale-up of a batch solid synthesis of zeolitic imidazolate framework-8 (ZIF-8) for reactive extrusion. The crystalline product forms in the extruder directly under the mixture of solid 2-methylimidazole and basic zinc carbonate in the presence of a catalytic amount of liquid. Highly crystalline ZIF-8 with a Brunauer−Emmett−Teller (BET) surface area of 1816 m2 g−1 was quantitatively prepared at mild temperature using a catalytic amount of ethanol and a small excess of the linker. Extruded ZIF-8 is an affordable alternative to commercial Basolite Z1200 as a reference material for H2 cryoadsorption. T2 - Metrology for Advanced Hydrogen Storage Solutions (MefHySto) Closing Conference CY - Berlin, Germany DA - 03.07.2023 KW - In situ Raman KW - Large-scale processing KW - Mechanochemistry KW - Twin-screw extrusion (TSE) PY - 2023 AN - OPUS4-58926 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Richter, Matthias A1 - Baldan, A. A1 - Beelen, R. A1 - de Boed, E. J.J. A1 - Tuma, Dirk A1 - Kipphardt, Heinrich A1 - Wilke, Olaf A1 - van der Veen, A. M.H. T1 - Primary gas standards for the determination of sulfur-based impurities at trace level in hydrogen N2 - Hydrogen fuel quality needs to comply with ISO 14687:2025 to avoid harmful impact on applications using proton-exchange membrane (PEM) fuel cells. For total sulfur as one of the most impactful contaminants, an amount fraction of 4 nmol/mol has been set as threshold (so-called Grade D quality). In this study, novel gaseous primary gas standards (PGS) of seven sulfur compounds were prepared either gravimetrically at 1000 nmol/mol, 100 nmol/mol, and 10 nmol/mol, or dynamically diluted down to 4 nmol/mol in hydrogen and argon matrices with relative expanded uncertainties well below 10 % (k = 2) and proven stability of at least 9–12 months. Two different cylinder passivation treatments were compared, with one treatment identified as unsuitable since reactions took place within the mixture. By performing a cross-check study, equivalence between both sets of PGS could be demonstrated (≤ 5 % relative deviation for most of the sulfur species). KW - Hydrogen quality KW - ISO 14687 KW - Sulfur impurities KW - Primary gas standards KW - TD-GC/SCD PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656759 DO - https://doi.org/10.1016/j.ijhydene.2026.154461 SN - 0360-3199 VL - 224 SP - 1 EP - 13 PB - Elsevier Ltd. AN - OPUS4-65675 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Sebastian T1 - Schweißen an druckführenden Wasserstoff-Ferngasleitungen im Betrieb – Ein Überblick über aktuelle FuE-Ergebnisse N2 - Grüner Wasserstoff wird als zukünftiger Energieträger eine wichtige Rolle bei der Dekarbonisierung der Energieversorgung spielen. Der Transport über große Entfernungen wird mittels eines Wasserstoff-Fernleitungsnetzes erfolgen. Ein solches Netz erfordert regelmäßig Schweißarbeiten zu Reparatur-, Wartungs- oder Erweiterungszwecken. Im Erdgasnetz ist das Schweißen im laufenden Betrieb gängige Praxis, da eine Außerbetriebnahme der Leitung technisch und wirtschaftlich sehr schwierig ist. Wasserstoff kann jedoch in den Rohrleitungsstahl eindringen, insbesondere bei erhöhten Temperaturen. Dies könnte zu einer Degradation der Materialeigenschaften oder sogar zu einem Versagen führen, bedingt durch die bekannten Effekte der wasserstoffinduzierten Versprödung und der wasserstoffunterstützten Rissbildung. Im Forschungsprojekt H2-SuD wird dies gezielt untersucht. Hierfür werden unter anderem Druckgasbeladung, Schweißversuche an vereinfachten Ersatzgeometrien und an realitätsnahen Demonstratoren, sowie numerische Simulation auf Basis gewonnener experimenteller Daten eingesetzt. T2 - Sitzung DIN NA 092-00-05 GA CY - Berlin, Germany DA - 24.03.2026 KW - Pipeline KW - Schweißen KW - Wasserstoff KW - Ferngasleitung PY - 2026 AN - OPUS4-65744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - El Harrab, H. A1 - Askar, E. A1 - Franken, T. A1 - Mauss, F. T1 - Investigation of the impact of base oils on the auto-ignition behavior of hydrogen–air mixtures N2 - Using hydrogen as a fuel in internal combustion engines (ICEs) poses several challenges that have yet to be resolved. One issue is the difficulty of controlling combustion, arising from the interaction of lubricant oil during the combustion process. This study examines the effect of lubricant oil on hydrogen's ignition behavior by measuring the minimum auto-ignition temperature (AIT) using a heated constant-volume autoclave at 20 bar. AIT measurements were performed in air and stoichiometric hydrogen–air mixtures to evaluate the effect of the base oil on ignition characteristics. Experimental results demonstrate that auto-ignition of a small volume of 0.2 ml in a total volume of 200 ml of base oil significantly altered the ignitability of H2, reducing the AIT of a stoichiometric H2-air mixture from 460 °C to 270 °C. Further increases in base oil volume up to 1 ml result in a further decrease in AIT in both air (260 – 240 °C) and H2-air mixtures (270 – 250 °C), indicating the need for further investigation into whether this suggests a higher risk of pre-ignition in H2 ICEs. Four common base oils – two mineral oils (Groups II and III) and two synthetic oils (Groups IV (polyalphaolefin) and V (ester)) – were tested to assess their ignition characteristics. The experimental results revealed that all four base oils exhibited similar AITs in air (260 °C) and in hydrogen–air mixtures (270 °C). However, their reactivity differed at a given temperature and pressure; the synthetic oils were less reactive than the mineral oils. Of the synthetic oils tested, the ester base oil exhibited the lowest reactivity, reflected in its longer ignition delay time. Additionally, a numerical investigation was conducted in an adiabatic, constant-volume reactor to examine the impact of base oil surrogates on H2 ignition across the temperature range. The simulated results showed that the base oil surrogates are more reactive than H2 at low temperatures. Of these tested oils, the ester showed the lowest reactivity at a given temperature and pressure, indicating its beneficial potential as a base lubricant for hydrogen engines. KW - Reactivity KW - Hydrogen KW - Pre-ignition KW - Auto-ignition temperature KW - Base oil KW - Ignition delay time PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657683 DO - https://doi.org/10.1016/j.ijhydene.2026.154564 SN - 0360-3199 VL - 226 SP - 1 EP - 10 PB - Elsevier Ltd. AN - OPUS4-65768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, Martin T1 - (K)ein explosives Thema? - Schweißen an und auf zukünftigen Wasserstoffpipelines im Betrieb unter Druckgasfluss N2 - Das Schweißen an druckführenden Leitungen im Betrieb ist beim Erdgas-Fernleitungsnetz Stand der Technik, beispielsweise beim Setzen von Abgängen durch „Hot-Tapping“. Diese Technik wird auch beim zukünftigen Wasserstoff-Kernnetz eine bedeutende Rolle spielen. Verfahrensbedingt ist daher eine bestimmte Wasserstoffaufnahme während des Schweißens unvermeidbar. Aus diesem Grund werden derzeit in mehreren Forschungsprojekten wie umfassende Erkenntnisse zum Schweißen an Rohrleitungen unter Druckwasserstoff gewonnen. Die grundsätzliche Übertragbarkeit des „Hot-Tapping“ auf zukünftige Wasserstoff-Rohrleitungen wurde bereits bestätigt (u. a. DNV-Projekt und HyTap). Allerdings besteht allein das zukünftige Wasserstoff-Kernnetz in Deutschland aus einer Vielzahl von Bestands- und Neuwerkstoffen mit unterschiedlichen Festigkeiten, Durchmessern und Wandstärken. Für diese ist eine umfassende Betrachtung notwendig. In diesem Bereich leistet das Projekt H2-SuD wesentliche Beiträge, insbesondere zur Frage der Anpassung der Mindestwandstärke für sicheres Schweißen. Hierzu bieten die Demonstratoren eine ideale Grundlage zum Screening vieler Schweißparameter-Werkstoff-Kombinationen. Eine erhöhte Wasserstoffkonzentration beim Schweißen wurde experimentell belegt (DNV-Projekt und H2-SuD), allerdings im allgemein nicht als kritisch erachteten Bereich. Zudem wurde eine Wasserstoffversprödung der Schweißnaht während des Schweißens an druckwasserstoffführenden Demonstratoren bisher nicht beobachtet. Dies liegt u.a. an den mechanischen Eigenschaften der Rohrleitungswerkstoffe (gute Dehnfähigkeit, auch im geschweißten Zustand). T2 - Vortragsreihe des Bezirksverbandes Berlin des Deutschen Verbandes für Schweißen und verwandte Verfahren (DVS) e.V. CY - Berlin, Germany DA - 25.03.2026 KW - Wasserstoff KW - Rohrleitung KW - Schweißen KW - Demonstrator KW - Bauteilprüfung PY - 2026 AN - OPUS4-65774 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Ammoniak als Energieträger in Deutschland: Zwischen Sicherheitsanforderungen, Infrastruktur und Akzeptanz N2 - Die Gewährleistung einer sicheren, zuverlässigen und klimaneutralen Energieversorgung stellt eine der zentralen Herausforderungen der kommenden Jahrzehnte dar. Als zentraler Baustein für die Energiewende wird Grüner Wasserstoff gesehen. Allerdings müssen bis zum Hochlauf einer flächendeckenden Wasserstoffinfrastruktur effektive Speicher- und Transportlösungen bereitgestellt werden. Verschiedene Wasserstoff-derivate, insbesondere Ammoniak, Methanol, synthetisches Methan und flüssige organische Wasserstoffträger (LOHCs), können dabei eine tragende Rolle spielen. Aufgrund seiner etablierten globalen Infrastruktur und der vorhandenen industriellen Produktions- und Handelsketten (weltweit über 170 Mio. Tonnen jährlich) stellt Ammoniak, besonders kurzfristig, eine vielversprechende Option für die energetische Nutzung dar. Zusätzlich zeichnet sich Ammoniak durch seine hohe Energiedichte und, im Vergleich zu Wasserstoff, einfache Lager- und Transportfähigkeit aus. Auch langfristig bietet Grüner Ammoniak, insbesondere der in sonnen- und windreichen Regionen aus erneuerbaren Energiequellen erzeugte, das Potenzial für eine wirtschaftliche Produktion und eine vielversprechende Option für künftige Energieimporte. Aufgrund der toxischen Eigenschaften und potenziellen Umweltrisiken sind allerdings umfassende sicherheitstechnische Maßnahmen sowie eindeutige regulatorische Rahmenbedingungen erforderlich. Darüber hinaus gilt es, technologische Herausforderungen zu lösen, die sich in Abhängigkeit von der Nutzung von Ammoniak ergeben. Hierzu zählen unter anderem die Emissionskontrolle bei der direkten Verbrennung von Ammoniak sowie die Verbesserung der Effizienz bei der Rückumwandlung von Ammoniak in Wasserstoff (Ammoniak-Cracking). Vor diesem Hintergrund hat die Bundesanstalt für Materialforschung und -prüfung (BAM) im Rahmen zweier Workshops in Kooperation mit relevanten Stakeholdern aus Behörden, Wirtschaft und aus der Wissenschaft zentrale Handlungsempfehlungen für die Politik abgeleitet, mit dem Ziel, den Einsatz von Ammoniak als Energieträger in Deutschland voranzubringen. Diese Handlungsempfehlungen werden im Beitrag päsentiert und anschließend zur Diskussion gestellt. Zusammenfassend lässt sich festhalten, dass Ammoniak ein vielversprechendes Wasserstoffderivat für die Dekarbonisierung darstellt, sofern politischer Wille und eine klare Strategie den zielgerichteten Ausbau der notwendigen Infrastruktur, die Schaffung regulatorischer Rahmenbedingungen sowie die Förderung technologischer Innovationen vorantreiben. T2 - 1. Berliner Fachtagung Prozess- und Anlagensicherheit CY - Berlin, Germany DA - 24.03.2026 KW - Ammoniak KW - Wasserstoffderivate KW - Energieträger KW - Herausforderungen PY - 2026 AN - OPUS4-65766 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hartwig, Peter T1 - Sichere Wasserstoffnetze ModuH2Pipe N2 - Der Wasserstofftransport durch Pipelines in Deutschland und Europa ist von zentraler Bedeutung für die zukünftige Energieversorgungssicherheit. Neben dem Neubau einer Wasserstoff-Transportinfrastruktur wird vor allem die kosteneffiziente Umwidmung bestehender Erdgasnetze für den Wasserstofftransport vorangetrieben. Dabei ergeben sich zahlreiche sicherheitstechnische Fragestellungen, insbesondere zur Materialeignung und -kompatibilität, der Zustandsanalyse und -überwachung von Pipelines sowie der Gewährleistung der Gasqualitäten. Die Validierung der wissenschaftlich-technischen Tragfähigkeit der Antworten zu diesen Fragen unter realen Bedingungen ist erforderlich für die erfolgreiche Transformation des Energietransports. Hierzu stellt die BAM eine neue, einzigartige Prüfinfrastruktur vor, die ab Juli 2026 zur Verfügung stehen wird. T2 - 1. Fachtagung für Anlagen- und Prozesstechnik CY - Berlin, Germany DA - 24.03.2026 KW - Wasserstoff KW - ModuH2Pipe KW - Modulare-Testplattform KW - Realmaßstab KW - Wasserstoffkernnetz PY - 2026 AN - OPUS4-65767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis T1 - Sicherheitstechnische Eigenschaften von Wasserstoff-Sauerstoff-Gemischen unter Prozessbedingungen der Elektrolyse N2 - Die Bildung von Wasserstoff-Sauerstoff-Gemischen, beispielsweise aufgrund von Cross-Over, Fehlfunktionen oder An- und Abschaltvorgängen, stellt eine für Elektrolyseprozesse ganz spezifische Gefahr dar, die angemessen berücksichtigt werden muss. In dieser Arbeit wurden die Explosionsgrenzen von Wasserstoff-Sauerstoff-Gemischen bei Prozessbedingungen von bis zu 30 bar und 300 °C experimentell bestimmt. Es zeigte sich, dass die vorhandenen experimentellen Daten mithilfe empirischer Ansätze mit guter Genauigkeit interpoliert werden können. Darüber hinaus wurden auch die Explosionsgrenzen unter atmosphärischen Bedingungen mit reduzierter Zündenergie bis hinunter zu 1 mJ bestimmt. Obwohl in der Literatur zu finden ist, dass die Zündenergie von brennbaren Gasen stark ansteigt, wenn die Konzentration von stöchiometrisch in den Bereich nahe den Explosionsgrenzen wechselt, wurde innerhalb des getesteten Zündenergiebereichs für H₂/O₂-Gemische kein signifikanter Einfluss der Gemischkonzentration festgestellt. Schließlich wurde die Zündung an heißen Oberflächen für Gemische mit 6 Mol-% Wasserstoff in Sauerstoff, also leicht oberhalb der Explosionsgrenze, experimentell bei verschiedenen Drücken bis zu 30 bara untersucht. Auch hier wurden nur geringe Abweichungen von den für stöchiometrische Gemische ermittelten Zündtemperaturen festgestellt. Zur Berechnung der Zündtemperaturen wurde ein 0D-Reaktormodell mit adiabatischem, konstantem Volumen verwendet. Das Modell wurde hinsichtlich seiner Vorhersage der Zündtemperaturen von Wasserstoffgemischen bei verschiedenen Drücken getestet. T2 - 1. Berliner Fachtagung Prozess- und Anlagensicherheit CY - Berlin, Germany DA - 24.03.2026 KW - Elektrolyse KW - Explosionsgrenzen KW - Zündenergie KW - Zündtemperatur PY - 2026 AN - OPUS4-65782 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rhode, Michael T1 - Praktikable Prüfung der Wasserstoffverteilung in Mehrlagenschweißungen in Anlehnung an die DIN EN ISO 3690 N2 - Das Forschungsvorhaben adressiert eine zentrale Lücke und damit einhergehende Einschränkung für geschweißte hochfeste Werkstoffe in der aktuellen Normung: Die DIN EN ISO 3690 erlaubt ausschließlich die Bestimmung des diffusiblen Wasserstoffs in einlagigen Prüfraupen und bildet damit die realen Bedingungen in mehrlagigen Schweißnähten hochfester Stähle nicht ab. Durch das mehrfache wiederholte Aufwärmen wird die eingebrachte Wasserstoffkonzentration deutlich unter die konservativen, einlagigen Prüfraupen bereits während des Schweißens abgesenkt. Hierzu fehlt jedoch eine einfache, experimentelle Methoden, um die tatsächliche lokale lagenabhängige bzw. globale Wasserstoffverteilung quantifizieren zu können. Das Vorhaben entwickelt daher erstmals eine Versuchsmethodik, der reale Diffusions- und Entgasungsbedingungen von Mehrlagenschweißungen experimentell reproduziert. Dadurch werden die Nachteile der ISO 3690 (einlagige Prüfraupe, konservative Bewertung) aufgehoben und mit dem Hauptvorteil (robuste, einfache Handhabung) kombiniert. Durch gezielte Variation von Wärmeführung, Zwischenlagentemperaturen und Wasserstoffangebot werden lokale und globale Wasserstoffverteilungen quantifiziert. Ergänzt durch ein numerisches Diffusionsmodell entsteht ein skalierbares Bewertungswerkzeug, das die experimentellen Daten generalisiert und auf reale Schweißnähte überträgt. Die Ergebnisse ermöglichen: (1) eine realitätsnahe Bewertung verbleibender Wasserstoffgehalte, Kaltrisssicherheit, damit die (2) die mögliche Ausweitung der HD Klassifizierung hochfester Schweißzusätze, und (3) die Beurteilung der Effektivität und Notwendigkeit von Wärmenachbehandlungs-maßnahmen (wie „Wasserstoffarmglühen“). T2 - Sitzung des NA 092-00-05 GA Gemeinschaftsarbeitsausschuss NAS/NMP: Zerstörende Prüfung von Schweißverbindungen (DVS AG Q 4/Q 4.1) CY - Berlin, Germany DA - 24.03.2026 KW - Schweißen KW - Wasserstoff KW - ISO 3690 KW - Prüfung KW - Mehrlagennaht PY - 2026 AN - OPUS4-65784 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Funnemann, Patrick T1 - Nachhaltige TiFe‑basierte H2-Speicher: Sicherheit entlang des Lebenszyklus - Ex-Kenngrößen eines hybriden Staub/H2 (2 %)/Luft‑Gemischs N2 - Der sichere Umgang mit Legierungen auf TiFe-Basis ist für deren Einsatz als reversible Wasserstoffspeichermaterialien von entscheidender Bedeutung. Während der Herstellung, des Betriebs und des Recyclings werden diese Legierungen häufig in Form feiner Pulver verarbeitet, die zündfähige Staubwolken und hybride Gemische mit Wasserstoff bilden können. In diesem Vortrag werden die Explosionscharakteristika einer pulverförmigen TiFe–Mn-Legierung unter zwei verschiedenen Atmosphären systematisch untersucht: Luft und Luft mit 2 % Wasserstoff, was 50 % der unteren Explosionsgrenze entspricht. Schlüsselparameter, darunter der maximale Explosionsdruck (pmax), die maximale Druckanstiegsrate ((dp/dt)max) und der Kst-Wert, wurden mittels standardisierter Versuche in einem 20-Liter-Kugel-Apparat bestimmt. Die Ergebnisse zeigen, dass Wasserstoff in Konzentrationen unterhalb der unteren Explosionsgrenze (UEG) in Kombination mit Staub die Druckanstiegsrate und den Kst-Wert tendenziell erhöht, während der maximale Explosionsdruck aufgrund der verringerten Sauerstoffverfügbarkeit leicht absinkt. Diese Ergebnisse unterstreichen, dass bereits geringe Wasserstoffzugaben die Flammenausbreitung beschleunigen und die Explosionsschwere erhöhen können, was für die Risikobewertung und die Auslegung von Explosionsschutzmaßnahmen in Wasserstoffspeichersystemen von entscheidender Bedeutung ist. Darüber hinaus liefert die durchgeführte umfassende chemische Charakterisierung eine solide Grundlage für zukünftige Untersuchung der sicherheitstechnischen Eigenschaften und unterstützt damit die Entwicklung sicherer und nachhaltiger Wasserstoffspeicher-Technologien. T2 - 1. Berliner Fachtagung Prozess- und Anlagen-sicherheit CY - Berlin, Germany DA - 24.03.2026 KW - Staubexplosionen KW - Hybride Gemische KW - Wasserstoffspeicherung KW - Wasserstoffsicherheit PY - 2026 AN - OPUS4-65781 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Askar, Enis T1 - HICON Experimental Campaign 3 - Ignition of Hydrogen due to Single Impact N2 - The experimental campaigns within HICON aim to obtain quantitative and qualitative data through experiments for statistics and understanding of ignition probabilities. Based on that hydrogen ignition models are developed transfering the risk-based models from the natural gas applications. Within the presented experimental campaign the focus was on impacts with gravel and with contaminated surfaces. It was found that the ignition probabilty of hydrogen atmospheres by mechanical impacts can be highly increased when gravel is involved and when surfaces are contaminated with oil or with fine sand (sandblasted surfaces), while natural gas atmospheres cannot be ignited under similar conditions. T2 - FABIG Fire and Blast Information Group 111th UK Technical Meeting CY - London, United Kingdom of Great Britain and Northern Ireland DA - 24.03.2026 KW - Explosion protection KW - Ignition sources KW - Mechanical sparks KW - Natural gas KW - Safety KW - Risk assessment PY - 2026 AN - OPUS4-65783 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hartwig, Peter T1 - Sichere Wasserstoffnetze ModuH2Pipe N2 - Modulare Testplattform für den sicheren Transport von Wasserstoff in neuen und vorhandenen Gasverteilnetzen Die BAM schafft mit der modularen Testplattform ModuH2Pipe erstmals in Europa eine Testinfrastruktur, welche die Betrachtung sicherheitstechnischer Fragestellungen im Realmaßstab und zugleich unter kritischen Bedingungen erlaubt, die sich im Zusammenhang mit Wasserstoff-und Wasserstoff-Erdgas-Pipelines stellen. Ziel ist, Gasnetzbetreibern u. a. ein Dienstleistungsangebot zur Verfügung zu stellen, welches die umfassende Beantwortung dieser und weiterer sicherheitstechnischer Fragestellungen ermöglicht. Die Testplattform ModuH2Pipe wird auf dem BAM Testgelände Technische Sicherheit (BAM TTS) stehen und integriert zwei Module, die für die experimentelle Untersuchung von Pipelinesegmenten, -komponenten (Dichtungen, Ventile etc.) und Polymerkomponenten im Originalmaßstab ausgelegt sind. Aber auch digitale Aspekte für Wasserstoffnetze können betrachtet werden. T2 - 1. Fachtagung für Anlagen- und Prozesstechnik CY - Berlin, Germany DA - 24.03.2026 KW - Wasserstoff KW - ModuH2Pipe KW - Testplattform KW - Realmaßstab KW - Wasserstoffkernnetz PY - 2026 AN - OPUS4-65765 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koerdt, Andrea T1 - Mikrobielle Einflüsse auf Wasserstoffspeicherung: Materialien, Abbauprozesse und Teststrategien N2 - Wasserstoff gilt als Schlüsseltechnologie für die Energiewende – doch seine sichere Anwendung stellt neue Anforderungen an Technik, Infrastruktur und Personal. Die Veranstaltung „H₂ Sicherheit“ bietet eine umfassende Plattform, um sich über die sicherheitsrelevanten Aspekte von Wasserstoff zu informieren und praxisnahe Lösungen kennenzulernen. Expert:innen aus Forschung, Industrie und Netzbetrieb geben Einblicke in aktuelle Entwicklungen, Herausforderungen und Best Practices. Fokus dieser Präsentation war der Mikrobielle Einfluss bei der unterirdischen Speicherung von Wasserstoff und das neuartige Testsystem (MISTRAL) T2 - DVGW- H₂ Sicherheit CY - Online meeting DA - 24.03.2026 KW - Wasserstoff KW - Unterirdische geologische Formationen KW - MISTRAL KW - MIC KW - Hochdruckbehälter KW - Biokorrosion PY - 2026 UR - https://www.dvgw-kongress.de/veranstaltungen/gas/h2-sicherheit#collapse-8103 AN - OPUS4-65810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasch, Thomas T1 - Sicherheit von Sauerstoffanlagen - aus Unfällen und Erfahrungen lernen N2 - Der Vortrag zeigt Beispiele auf, wie einerseits durch Untersuchungen von Unfällen sowie andererseits durch die zahlreichen Prüfungen an der BAM Erkenntnisse gewonnen wurden. Diese sind in die Überarbeitung von Normen und Standards sowie in die Modifikation von Prüfverfahren und von Bewertungskriterien eingeflossen. So wird zum Beispiel bei der Untersuchung nichtmetallischer Materialien versucht, den tatsächlichen, praktischen Anwendungsfall zu berücksichtigen und diesen durch die Prüfungen möglichst abzubilden. Änderungen beim Herstellungsprozess, bei der Materialzusammensetzung und bei Weiterverarbeitungsprozessen nichtmetallischer Materialien haben in der Vergangenheit immer wieder zu deutlich unterschiedlichen Prüfergebnissen geführt. Dem wurde nunmehr durch die Einführung chargenbezogener Prüfungen Rechnung getragen. Für Ventile mit integriertem Druckregler (Valves with Integrated Pressure Regulator - VIPR) wurden neue und überarbeitete Prüfanforderungen für die Lebensdauer und für die Ausbrennsicherheit festgeschrieben, um den gestiegenen sicherheitstechnischen Anforderungen für Anwendungen mit medizinischem Sauerstoff Rechnung zu tragen. Ziel ist es, auch zukünftig die Sicherheit von Sauerstoffanlagen durch die Betrachtung von Unfällen und die Erfahrungen aus Prüfungen zu verbessern. T2 - 1. Berliner Fachtagung für Prozess- und Anlagensicherheit CY - Berlin, Germany DA - 24.03.2026 KW - Sauerstoff KW - Unfälle KW - Chargenprüfung KW - Prüfanforderungen KW - Sicherheit PY - 2026 AN - OPUS4-65813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -