TY - CONF A1 - Günzel, Stephan A1 - Mair, Georg T1 - Safety assessment of hydrogen gas storage systems N2 - In this lecture, the safety assessment of hydrogen gas storage systems is presented using the example of composite pressure vessels. The main element is a probabilistic approval approach based on five steps. Firstly, the testing and evaluation of properties at the beginning of life are shown. Secondly, methods for artificial aging and the effect on the residual strength are presented. Thirdly, testing against dedicated accidents is introduced. Fourthly, effects on the surveillance of production quality are discussed. Finally, degradation and the end of life are estimated. Background information and examples are given for each step. The assessment presented is a method applicable for many safety-related systems. T2 - Joint European Summer School 2022, Hydrogen Safety CY - Athens, Greece DA - 18.09.2022 KW - Safety KW - Hydrogen KW - Wasserstoff KW - Bewertung KW - Assessment PY - 2022 AN - OPUS4-59904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günzel, Stephan A1 - Mair, Georg A1 - Wang, Bin T1 - Safety aspects of hydrogen transportation N2 - In this presentation safety aspects of hydrogen transportation are discussed. At first, the regulatory background and level of safety are presented. In the second part, the modelling of consequence due to sudden rupture of pressure receptacles is explained. Finally, the results are used to define a limit for consequence to enable an acceptable and safe transport of hydrogen. T2 - 3rd Germany-Korea Hydrogen Conference CY - Berlin, Germany DA - 27.09.2022 KW - Safety KW - Hydrogen KW - Wasserstoff KW - Gefahrgut KW - Consequence PY - 2022 AN - OPUS4-59902 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - John, Sebastian A1 - Auster, Jürgen A1 - Widjaja, Martinus Putra A1 - Duffner, Eric A1 - Mair, Georg T1 - Current results of the DELFIN project N2 - As a contribution to the national hydrogen strategy, 3.5 years ago, the Delfin research project started with the aim of developing a cost- and material-optimized hydrogen tank design for automotive application. Under the patronage of the National Organization Hydrogen and Fuel Cell Technology (NOW), a consortium consisting of 9 research institutes, component suppliers, engineering service providers and automobile OEMs is processing a wide range of work packages. The focus of BAM research sets on impact testing and safety-related characterization of pressure vessels of different development stages. Furthermore, the implementation of nondestructive testing methods is applied. The presentation shows an overview of the BAM work packages and an extraction of the results generated so far. T2 - Wasserstoffkolloquium des Kompetenzzentrums H2Safety@BAM CY - Online meeting DA - 16.02.2022 KW - Delfin KW - Wasserstoff KW - Druckbehälter KW - Impact PY - 2022 AN - OPUS4-55348 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - John, Sebastian A1 - Jürgen, Auster A1 - Widjaja, Martinus Putra A1 - Duffner, Eric A1 - Mair, Georg T1 - Vorstellung NIP II FORSCHUNGSVORHABEN DELFIN N2 - As a contribution to the national hydrogen strategy, 3.5 years ago, the Delfin research project started with the aim of developing a cost- and material-optimized hydrogen tank design for automotive application. Under the patronage of the National Organization Hydrogen and Fuel Cell Technology (NOW), a consortium consisting of 9 research institutes, component suppliers, engineering service providers and automobile OEMs is processing a wide range of work packages. The focus of BAM research sets on impact testing and safety-related characterization of pressure vessels of different development stages. Furthermore, the implementation of nondestructive testing methods is applied. The presentation shows an overview of the BAM work packages and an extraction of the results generated so far. T2 - SAMPE Feierabendkolloqium CY - Online meeting DA - 15.06.2022 KW - Delfin KW - Wasserstoff KW - Druckbehälter KW - Impact PY - 2022 AN - OPUS4-55349 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - John, Sebastian A1 - Auster, Jürgen A1 - Widjaja, Martinus A1 - Duffner, Eric A1 - Mair, Georg T1 - NIP II - Forschungsvorhaben „DELFIN“ N2 - Überblick über Projektinhalte und -ergebnisse aus dem Forschungsvorhaben Delfin „Erforschung alternativer Materialien und Fertigungsprozesse für kosten- und gewichtsreduzierte Druckbehälter aus endlosfaserverstärkten Kunststoff“ T2 - SAMPE Kolloquium CY - Online meeting DA - 15.01.2022 KW - Wasserstoff KW - Druckbehälter KW - Impact PY - 2022 AN - OPUS4-58064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kehr, Torsten A1 - Günzel, Stephan A1 - Habib, Abdel Karim A1 - Mair, Georg A1 - Maiwald, Michael A1 - Prager, Jens A1 - Tiebe, Carlo T1 - Project QI-Digital - Quo vadis Use Case H2 Refueling Station? N2 - As a part of the QI-Digital cooperation project, BAM is setting up a hydrogen refuelling station research platform at the Test site for Technical Safety in Horstwalde. Based on this platform, BAM intends to develop, to test and to optimize new measurement techniques as well as data acquisition and processing methods for hydrogen refuelling stations and their periphery in close cooperation with partners from the quality infrastructure and industry. The presentation will introduce the hydrogen refuelling station use case and provide insights into the issues and research goals of the associated subprojects. T2 - H2-Colloquium of the Competence Centre „H2SAFETY@BAM” CY - Online meeting DA - 16.02.2022 KW - Hydrogen KW - Safety KW - QI-Digital PY - 2022 AN - OPUS4-54361 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg T1 - 1. Wasserstoffkolloquium H2 SAFETY@BAM N2 - Die Präsentation ist der Startschuss für die Wasserstoffkolloquien der BAM. Sie beginnt mit Adolf Martens und zeigt den Weg vom Foresight-Prozess Wasserstoff bis zum Kompetenzzentrum H2Safety@BAM. Es werden die Kompetenzfelder vorgestellt und die handelnden Personen. Dies leitet über zu den drei Vorträgen des Tages und den Vortragenden. T2 - 1st H2 Colloquium of the competence centre „H2 SAFETY@BAM” CY - Online-Meeting DA - 16.02.2022 KW - H2Safety@BAM KW - Foresight Prozess H2 KW - Wasserstoff Café KW - Project QI Digital: Quo vadis Use Case H2 Refuelling Station? KW - Current results of the DELFIN project KW - The upper consequence limit as a control instrument PY - 2022 AN - OPUS4-54607 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg A1 - Perez, Teresa T1 - Competence centre H2Safety@BAM N2 - Dr Mair presents the competence centre “H2Safety@BAM”. He starts with a spectacular hydrogen accident on the Tempelhofer Feld (Berlin) in 1894, comes to the foundation of the competence centre in the context of the hydrogen strategies of Germany and the EU and explains their safety-focused orientation in order to create and maintain confidence in hydrogen technologies. Beyond the long-term changes in energy supply, in Sept. 2022 there are enormous cost leaps in gas supply, which puts hydrogen as an energy carrier in a different light. Based on this, he presents the structure of the Competence Centre with its 5 competence areas and the corresponding contact persons. This is underpinned by a slide on each of the work packages in the fields of competence. At the end of the presentation, he explains the focus of the competence area "Component Testing, Component Safety and Approval", for which he is responsible. This is the question of cost reduction by using the whole potential of digitalisation in connection with the safety surveillance of the storage systems. The run of a fully digital system is of great importance for both, for the hydrogen supply of large consumers via road and rail and for storage systems in stationary plants. A robust and well-thought-out digitalisation in all levels of documentation will lead to a new quality in monitoring safety porperties, integration of new components and cost reduction. T2 - TÜV Rheinland H2-Safety-Day für Berlin und Brandenburg CY - Dahlewitz, Germany DA - 22.09.2022 KW - H2Safety@BAM KW - Market Rump Up KW - Safety KW - Reliabillity KW - Hydrogen Supply PY - 2022 AN - OPUS4-56983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg A1 - Günzel, Stephan A1 - Askar, Enis T1 - Mit „Knallgas“ in die Zukunft? Sicherheit von Wasserstoff – Von der Herstellung bis zur Nutzung N2 - Der Vortrag gibt eine Antwort auf die Frage: „Ist der Umgang mit Wasserstoff so sicher, dass wir unsere Zukunft darauf aufbauen können?“ Dr. Mair stellt das Kompetenzzentraum H2Safety@BAM vor. Er beginnt mit dem spektakulären Wasserstoff-Unfall auf dem Tempelhofer Feld aus dem Jahr 1894, kommt zur Gründung des Kompetenzzentrums im Kontext der Wasserstoffstrategien Deutschlands und der EU und erläutert deren sicherheitsfokussierte Ausrichtung, um Vertrauen in Wasserstofftechnologien zu schaffen und zu bewahren. Danach werden die physikalischen Eigenschaften von Wasserstoff im Vergleich zu Methan (Erdgas) vorgestellt. Dies leitet über zur Betrachtung des Hindenburg-Unfall sin Lakehurst 1937. Im nächsten Abschnitt werden der weltweite Bedarf an H2, sein Importbedarf aus deutscher Sicht, das weltweite Erzeugungspotential und der Transportaufwand der üblichen H2-Derivate dargelegt. Die zentrale Frage ist die nach der Sicherheit von Wasserstoff als Ergebnis der bisher ergriffenen Maßnahmen. Es werden wenige der immer wieder geschehenden Unfälle im Transport von Energieträgern vorgestellt, was zur Erkenntnis führt, dass, um die Sicherheit objektiv beurteilen zu können, der Risikobegriff herangezogen werden muss. Das Risiko basiert auf der Konsequenz und der Häufigkeit eines Ereignisses. Mit Blick auf den bereits erkennbaren Markhochlauf wird dargelegt, wie eine Risikosteuerung in Abhängigkeit der Produkte im Transport funktionieren kann. Hierzu muss beachtet werden, dass jede Eigenschaft streut. Damit sind auch die Zuverlässigkeit jedes einzelnen Speichers, des gesamten Bestandes an Gasspeichern, im Neuzustand und erst recht mit zunehmendem Alter einer Streuung unterworfen, die aktuell nur über Stichproben abgeschätzt werden kann. Es wird an Beispielen aufgezeigt, welche Prüftechniken und Beurteilungsmethoden die BAM zur Sicherheitsbeurteilung von Transportspeichern und sogar Tankstellen einsetzt und weiterentwickelt. Dies führt zu einem Petitum für probabilistische Betrachtungsweisen von Produktsicherheit mit Blick auf die Qualität der Rechtsvorschriften, der Produktdesigns und der Herstellung von Produkten für die Wasserstoffanwendung. T2 - Tagung Hoffnungsträger Wasserstoff - Chancen, Hürden, Risiken CY - Wittenberg, Germany DA - 20.10.2022 KW - Wasserstoffspeicher KW - Markthochlauf KW - Sicherheit KW - H2Safety@BAM.de KW - Risikosteuerung PY - 2022 AN - OPUS4-56985 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg T1 - Die BAM - mit einem aktuellen Aspekt der ZfP N2 - Die BAM wird kurz mit ihren Eckdaten als Ganzes vorgestellt und dann der Einstieg in die besonderen Möglichkeiten der Versuchsplattform "Wasserstofftankstelle" erläutert. Nach kurzen Vorstellung der Struktur der Tankstelle wird erläutert, wie drei Methoden der ZfP für das Structural Health Monitoring in Verbindung mit KI zur Anwendung kommen werden. T2 - Fachausschusssitzung Schallemissionsprüfung DGZfP CY - Online meeting DA - 10.03.2022 KW - 150 Jahre BAM KW - Versuchsplattform KW - H2-Tankstelle KW - Ultraschall KW - Schallemissionsanalyse KW - Optische Fasern KW - Künstliche Intelligenz PY - 2022 AN - OPUS4-54606 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg A1 - Duffner, Eric A1 - Holtappels, Kai A1 - Maiwald, Michael A1 - Sobol, Oded A1 - Perez, Teresa T1 - Aspekte der Bauteilprüfung, Bauteilsicherheit und Zulassung im Kompetenzzentrum H2SAFETY@BAM N2 - Der Vortrag zeigt den Weg des Themas Wasserstoff von Adolf Martens bis zum Kompetenzzentrum H2SafetyBAM, die zugehörigen Kompetenzfelder, deren Ziele und verantwortliche Personen. Der Hauptteil reflektiert den Aspekt des Markthochlaufes von Wasserstofftechnologien und zeigt einen Maßnahmenkatalog von der Risikosteuerung über die Konsequenzbegrenzung bis zu probabilistische Ansätzen in der Bewertung von Prüfergebnissen und der Wirkung von Mindestanforderungen. T2 - DVGW-Kongress H2-Sicherheit CY - Online meeting DA - 26.02.2022 KW - Wasserstoffspeicher KW - Markthochlauf KW - Monte-Carlo-Simulation KW - Druck-Volumen-Produkt KW - Alterung PY - 2022 AN - OPUS4-54609 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg A1 - Günzel, Stephan A1 - Bock, Robert T1 - The maximum acceptable consequence limit as a control instrument N2 - The presentation starts with the first agreement of making a national attempt for the introduction of a pV-limit for hydrogen transport. It explains aspects of the technical development, provides an impression of catastrophic incidents, and explains the difference between risk control and consequence limitation. Then the process of determining consequences and the result from the discussion at the UN-WG are explained. The next part summarises the approach for counting the number of impacted persons as a function of the model of pressure wave, the pressure peak, the limits of injured persons and the population density. Finally, the latest state of the discussion and the subsequent recommendations for a pV-value and the adequate phrases for explanation are introduced. T2 - 29th BAM-DIN-IGV-DVFG-Meeting CY - Online meeting DA - 23.02.2022 KW - Hydrogen KW - Pressure recepacles KW - Consequence limit KW - Risk control KW - Population density KW - Pressure wave PY - 2022 AN - OPUS4-54608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg T1 - Sicherheitsforschung im Bereich Wasserstoff – Transport von CGH2 N2 - Ein Aspekt des Gefahrguttransportes, der an Bedeutung in den letzten Jahren zugenommen hat, ist die Versorgung von Wasserstofftankstellen und anderen H2-Großverbrauchern über die Schiene aber insbesondere über die Straße. Mit Blick auf die primäre Form der Speicherung wird der Begriff der Sicherheit über den Aspekt der Häufigkeit eines definierten Ereignisses erläutert und auf die Besonderheiten der Druckgefäße aus Verbundwerkstoffen hingewiesen, wie auch den regulatorischen Hintergrund der Lebensdauerüberprüfung nach 15 Jahren nach den Vorgaben der zuständigen Behörde. In Deutschland sind diese Vorgaben in der BAM-Gefahrgutregel 021 geregelt, die in der GGR 022 durch eine Regelung zur Wiederkehrenden Prüfung dieser Umschließungen ergänzt wird. Beide BAM-Gefahrgutregeln basieren auf einem probabilistischen Ansatz und einer Konsequenzabschätzung über das Druck-Volumen-Produkt der Druckgefäße. Die neu im Recht verankerte EN 17339 ist die erste Norm, die speziell fest montierte Compositespeicher für den Wasserstofftransport regelt. Sie ermöglicht eine erhebliche Gewichtreduktion und führt eine Obergrenze für das Druckvolumen ein. Es wird kurz erläutert, dass gerade mit Blick auf Wasserstofftransporte über eine Arbeitsgruppe der Vereinten Nationen eine Begrenzung des Konsequenzpotentials in das internationale Recht eingeführt werden soll und welche Kriterien bei der systematischen Ermittlung des akzeptierten Wertes von 1.5 Mio bar Liter Einfluss haben. Mit Blick auf die Energiewende sieht es die BAM als besonders wichtig an, die Transportkosten zu senken, indem der Prüfaufwand reduziert und gleichzeitig die Erkenntnistiefe aus der betrieblichen Überwachung verbessert wird. Hierzu muss die Datenbasis für die probabilistische Bewertung der Lebensdauer von zerstörenden Prüfungen auf zerstörungsfreie Prüfungen umgestellt werden und idealerweise die 100% Prüfung zumindest in der ersten Hälfte des sicheren Lebens auf Stichproben reduziert werden. Dies und andere Aufgaben, die wichtig für eine sichere und attraktive Wasserstoffwirtschaft sind werden von dem Kompetenzzentrum H2Safety@BAM bearbeitet, dass in seinen Grundzügen kurz vorgestellt wird. T2 - IAA Transportation 2022 CY - Hannover,Germany DA - 20.09.2022 KW - H2Safety@BAM KW - Markthochlauf KW - Lebensdauervorhersage KW - zerstörungsfreie Prüfung ZfP KW - Risikosteuerung PY - 2022 AN - OPUS4-56984 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Askar, Enis A1 - Günzel, Stephan A1 - Holtappels, Kai A1 - Mair, Georg A1 - Orellana Pérez, Teresa A1 - Sobol, Oded A1 - Tiebe, Carlo T1 - Competence Centre H2Safety@BAM – Safeguarding the Quality Infrastructure in the Hydrogen Economy N2 - Hydrogen is a central component of the energy transition and the European Green Deal for a climate-neutral Europe. To achieve the goals defined for 2050, the EU and the German government have developed a framework for action and are making long-term investments in research, development, and the rapid implementation of innovative hydrogen technologies. With the Competence Centre "H2Safety@BAM", BAM is creating the safety-related prerequisites for the successful implementation of hydrogen technologies at national as well as European level. To this end, BAM conducts research, testing and consulting in a holistic and inter-disciplinary manner under one roof – in the Competence Centre H2Safety@BAM. The activities of the competence centre focus on ensuring the safety of infra-structures, plants, and processes as well as innovative hydrogen transport and storage systems based on digital quality testing and the experimental testing of components and systems. It thus creates the prerequisites for the implementation and adaptation of legal framework conditions as well as for standardization. Closely related to this are investigations into the properties and compatibility of metallic materials and polymers as well as friction systems for the safe operation of components, plants, processes, and systems. This interdisciplinary and holistic approach is complemented by the development of gas analytics and suitable sensors, online measurements of gas properties in process control, test scenarios under real conditions as well as impact assessments of accidents and risk assessments and risk management systems derived from them. With its portfolio of tasks and competences, BAM builds trust in the safety and reliability of technical system solutions for hydrogen. T2 - 772. WE-Heraeus-Seminar - Metrology and Process Safety for Hydrogen Technologies & Applications CY - Bad Honnef, Germany DA - 10.10.2022 KW - H2Safety@BAM KW - Hydrogen KW - Competence Center KW - Hydrogen Strategy KW - Green Deal KW - Safety KW - Risk Assessment KW - Quality Infrastructure PY - 2022 UR - https://www.we-heraeus-stiftung.de/veranstaltungen/metrology-and-process-safety-for-hydrogen-technologies-and-applications/ AN - OPUS4-55986 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Orellana Pérez, Teresa A1 - Mair, Georg A1 - Günzel, Stephan A1 - Holtappels, Kai A1 - Askar, Enis A1 - Sobol, Oded A1 - Gradt, Thomas A1 - Maiwald, Michael A1 - Tiebe, Carlo A1 - Bock, Robert T1 - Competence Centre H2Safety@BAM N2 - Presentation of the Competence Centre H2Safety@BAM with all five competence field, representatives as well as its vision, mission, strategic goals and implementation plan. T2 - III. TR Wasserstoff Erfahrungsaustausch, TÜV Rheinland CY - Cologne, Germany DA - 07.12.2022 KW - Hydrogen safety KW - Materials compatibility KW - Component testing KW - Process and plant safety KW - Sensors and analytics KW - Cross-cutting activities PY - 2022 AN - OPUS4-59301 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Orellana Pérez, Teresa T1 - European policy framework regulations codes and standards for safe hydrogen technologies N2 - This lecture describes the history of hydrogen from the first scientific discoveries in the 18th century to the current technological and political developments for the market ramp-up of hydrogen technologies. The European policy framework for safe hydrogen technologies is explained comprehending the European Green Deal, European Climate Law, European Hydrogen Strategy, Clean Hydrogen Partnership, etc. Safety in hydrogen technologies is governed by international and European regulations and standards. An overview on regulatory bodies, technical committees, regulations, directives, standards, and technical guidelines with special attention on the BAM-GGR 021 is given in this lecture. T2 - Joint European Summer School 2022, Hydrogen Safety CY - Athens, Greece DA - 18.09.2022 KW - Hydrogen KW - Safety KW - Regulations KW - Standards PY - 2022 AN - OPUS4-59295 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Orellana Pérez, Teresa T1 - Guest lecture: European policy framework regulations codes and standards for safe hydrogen technologies N2 - This lecture describes the history of hydrogen from the first scientific discoveries in the 18th century to the current technological and political developments for the market ramp-up of hydrogen technologies. The European policy framework for safe hydrogen technologies is explained comprehending the European Green Deal, European Climate Law, European Hydrogen Strategy, Clean Hydrogen Partnership, etc. Safety in hydrogen technologies is governed by international and European regulations and standards. An overview on regulatory bodies, technical committees, regulations, directives, standards, and technical guidelines with special attention on the BAM-GGR 021 is given in this lecture. T2 - MSc Fuel Cells and Hydrogen Technologies at the University of Birmingham (LM Hydrogen Safety, MSc FCHT module C7B) CY - Birmingham, UK DA - 21.10.2022 KW - Hydrogen KW - Safety KW - Regulations KW - Standards PY - 2022 AN - OPUS4-59296 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Solberg, S. A1 - Zimmermann, P. A1 - Wilhelmsen, Ø. A1 - Lamb, J. A1 - Bock, Robert A1 - Burheim, O. T1 - Heat to Hydrogen by Reverse Electrodialysis—Using a Non-Equilibrium Thermodynamics Model to Evaluate Hydrogen Production Concepts Utilising Waste Heat N2 - The reverse electrodialysis heat engine (REDHE) is a promising salinity gradient energy technology, capable of producing hydrogen with an input of waste heat at temperatures below 100 °C. A salinity gradient drives water electrolysis in the reverse electrodialysis (RED) cell, and spent solutions are regenerated using waste heat in a precipitation or evaporation unit. This work presents a non-equilibrium thermodynamics model for the RED cell, and the hydrogen production is investigated for KCl/water solutions. The results show that the evaporation concept requires 40 times less waste heat and produces three times more hydrogen than the precipitation concept. With commercial evaporation technology, a system efficiency of 2% is obtained, with a hydrogen production rate of 0.38 gH2 m−2h−1 and a waste heat requirement of 1.7 kWh g−1H2. The water transference coefficient and the salt diffusion coefficient are identified as membrane properties with a large negative impact on hydrogen production and system efficiency. Each unit of the water transference coefficient in the range tw=[0–10] causes a −7 mV decrease in unit cell electric potential, and a −0.3% decrease in system efficiency. Increasing the membrane salt diffusion coefficient from 10−12 to 10−11 leads to the system efficiency decreasing from 2% to 0.6% KW - Non-equilibrium thermodynamics KW - Hydrogen KW - Waste heat KW - RED PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-556677 DO - https://doi.org/10.3390/en15166011 VL - 15 IS - 16 SP - 6011 PB - MDPI AN - OPUS4-55667 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Soruco Aloisio, Ricardo A1 - Maiwald, Michael T1 - Eine Infrastruktur für den digitalen Zwilling – Use Case H2-Tankstelle N2 - Im Rahmen von der BAM und anderen Partnern ins Leben gerufene Initiative „Digitale Qualitätsinfrastruktur“ ist der Fokus auf die Entwicklung von neuen Regelwerken und Zertifizierungsworkflows ausgerichtet. Dabei ist eine besondere Bedeutung dem Zusammenführen von Operational Technology (OT) und Informationstechnik (IT) beizumessen, wenn aktuelle Prozess- und Parameterdaten zuverlässig zur Verfügung gestellt werden sollen. In dem Use Case Wasserstofftankstelle werden digitale Abbilder erprobt, die u.a. der Kalibrierung von Sensoren, dem Nachweis über die Wasserstoffreinheit und der vorausschauenden Wartung dienen sollen. Großenteils der verfahrenstechnischen Bestandsanlagen, die sogenannten Brownfield-Anlagen, sind nach einem konservativen und hierarchischen Automatisierungskonzept ausgelegt. Hierbei können sämtliche Prozessdaten, besonders aus der Feldebene, einer oberen informationstechnische Ebene unzugänglich bleiben. Eine Brückentechnologie nach der NAMUR Open Architecture (NOA) soll möglichst viele Informationen und Daten aus der vorgegebenen Brownfield-Automatisierung sicher und rückwirkungsfrei zur Verfügung stellen. Zusätzliche Sensorik soll ebenso zu der Datenerweiterung beitragen und letztendlich den digitalen Zwilling, bzw. das digitale Abbild des verfahrenstechnischen Prozesses, ergänzen. Die Herausforderungen einer solchen Infrastruktur gelten vor allem einer universellen Kommunikationsschnittstelle und der Sicherheit. Darüber hinaus werden vorgeschlagene Normen und Empfehlungen untersucht und erprobt. T2 - Jahrestreffen der "Prozess-, Apparate- und Anlagentechnik" CY - Frankfurt am Main, Germany DA - 21.11.2022 KW - QI-Digital KW - Use-Case Wasserstofftankstelle KW - Automatisierung KW - Operational Technology KW - Digitaler Zwilling KW - NAMUR Open Architecture PY - 2022 AN - OPUS4-56402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo A1 - Maiwald, Michael A1 - Bresch, Sophie A1 - Prager, Jens A1 - Lugovtsova, Yevgeniya A1 - Schukar, Marcus A1 - Munzke, Dorit A1 - Duffner, Eric A1 - Eisermann, René A1 - Schoppa, André A1 - Szczepaniak, Mariusz A1 - Strohhäcker, J. A1 - Mair, Georg T1 - Sensoren und Analytik für Sicherheit und Prozesskontrolle in Wasserstofftechnologien N2 - Der Beitrag beinhaltet Themen vom H2Safety@BAM-Kompetenzfeld Sensorik, Analytik und zertifizierte Referenzmaterialien (SensRef) mit Fokus auf Mess- und Prüfverfahren mit verschiedenen Sensortechnologien und Ultraschallwellen: Metrologie zur Wasserstoffspeicherung - Euramet-Vorhaben "MefHySto", Erkennung von freigesetztem Wasserstoff sowie die Bestimmung des Wasserstoff-Luftverhälntisses mit Gassensoren, zerstörungsfreie Fehlstellenerkennung mit integriertem Zustandsüberwachungssystem basierend auf geführten Ultraschallwellen zur Lebensdauerüberwachung von Composite-Behältern (Wasserstoffspeicher) sowie faseroptische Sensorik zur Schadenfrüherkennung von Wasserstoffspeichern aufgrund erkennbarer Dehnungsänderungen an Druckbehältern. T2 - DVGW Kongress H2 Sicherheit CY - Online meeting DA - 23.11.2022 KW - H2Safety@BAM KW - SensRef KW - Faseroptische Sensorik KW - Gassensorik KW - Geführte Ultraschallwellen KW - Leckdetektion KW - Metrologie zur Wasserstoffspeicherung KW - Zerstörungsfreie Prüfung KW - Structural Health Monitoring (SHM) PY - 2022 AN - OPUS4-56683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -