TY - JOUR A1 - Walter, Keven A1 - Hoch, Dominik P. A1 - Hertweck, Leon A1 - Balasubramanian, Kannan A1 - Geisler, Jonas A1 - Röllig, Mathias A1 - Neubert, Tilmann J. A1 - Börner, Hans G. T1 - Unlocking the Essence of Lignin: High‐Performance Adhesives That Bond via Thiol‐Catechol Connectivities and Debond on Electrochemical Command N2 - AbstractThe next generation of adhesives requires effective debonding capabilities that can be triggered on demand to enable advanced circular repair and recycling strategies. A new class of lignin‐inspired, two‐component (2K) structural adhesives offers bonding strengths of up to 20 MPa and clean, on‐command electrochemical debonding within 5–30 min. The debonding is induced by a distinct electrochemical oxidation of thiol‐catechol connectivities (TCCs) within the entire adhesive network, enforcing rapid and clean adhesive failure on the cathodic substrate side. The TCC‐functionalities are formed during curing by a thiol‐quinone Michael‐type polyaddition, reacting polyester‐based trithiols with tris‐quinones as lignin‐inspired minimal building blocks. The structural adhesive can be fine‐tuned by adjusting the formulation. The addition of carbon black and ionic liquids facilitates the desired electrochemical transformation of TCC‐catechols to TCC‐quinones. Applying only 9 V for 5–30 min, leads to clean debonding with 72–86% loss of shear strength. A comprehensive study of curing, bonding, and debonding behavior by rheological, spectroscopic, and electrochemical investigations reveals the debonding mechanism by correlating catechol oxidation to adhesive performance. The electrochemical debonding capability of TCC‐structural adhesives is demonstrated in a functional prototype, where on‐command detachment of a cover glass from a display device is achieved within 6.5 min. KW - Lignin-inspired KW - Electrochemical-Debonding KW - Thiol-Catechol-Connectivity (TCC) KW - Michael-Type Polyaddition KW - On-Demand Adhesive Failure PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-639674 DO - https://doi.org/10.1002/adma.202510463 SN - 0935-9648 SP - 1 EP - 10 PB - Wiley VHC-Verlag CY - 69451 Weinheim AN - OPUS4-63967 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Yildirim, Arda A1 - Haug, T. C. V. A1 - Fröba, M. A1 - Huber, P. A1 - Schönhals, Andreas T1 - Molecular fluctuations in mixed-metal MOF-74: influence of the metal composition N2 - A selected series of metal–organic frameworks M-MOF-74 (M = Mg, Co, Ni) and mixed metal MM-MOF-74 (Mg/Co or Mg/Ni) with different compositions of metal atoms have been prepared and further investigated by broadband dielectric spectroscopy (BDS) in a wide temperature range. The dielectric spectra show at least two relaxation processes. Process-A is observed only for the Ni-containing MOFs and is attributed to localized fluctuations of the metal oxide corners. Relaxation processes-B and -C are observed for all prepared MOFs, except that process-B is not observed for Ni-MOF-74. Large-angle fluctuations such as free rotations of the linkers can be excluded due to the structure of MOF-74, but small-angle fluctuations such as torsions are possible. According to numerical simulations carried out for MOF-74, process-B can be attributed to inward and outward fluctuations of the linkers relative to the pore center. Process-C is related to small-angle rotational fluctuations of the linker together with co-rotations of the metal nodes. The latter interpretation is supported by the dependence of the activation energy of the relaxation rate of process-C on the metal composition of the MOFs, which is discussed in terms of the bond lengths between the metal atoms and the linker which decrease in the sequence Mg, Co and Ni. KW - Metal Organic Frameworks PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-639378 DO - https://doi.org/10.1039/d5ra05357a SN - 2046-2069 VL - 15 IS - 35 SP - 29109 EP - 29118 PB - Royal Society of Chemistry (RSC) AN - OPUS4-63937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kolmangadi, Mohamed A. A1 - Raab, A. R. A1 - Szymoniak, Paulina A1 - Li, Z. A1 - Huber, P. A1 - Laschat, S. A1 - Schönhals, Andreas T1 - Molecular mobility and electrical conductivity of amino acid-based (DOPA) ionic liquid crystals in the bulk state and nanoconfinement N2 - This study explores the molecular mobility, phase behavior, and electrical conductivity of dihydroxyphenylalanine-based ionic liquid crystals (DOPAn, with alkyl side chains n = 12, 14, 16) featuring cyclic guanidiniumchloride headgroups, in both bulk and nanoconfined states. Using broadband dielectric spectroscopy, differential scanning calorimetry, and fast scanning calorimetry, the research uncovers a complex interplay between molecular structure, self-assembly, and molecular mobility. In bulk, DOPAn shows a phase sequence from plastic crystalline to hexagonal columnar and isotropic phases, driven by superdisc formation and columnar organization. Multiple relaxation processes are identified: localized side-chain dynamics (γ-relaxation), ionic headgroup or core motions (α1-relaxation), and cooperative alkyl domain fluctuations (α2-relaxation). Conductivity decreases with increasing side chain length. Under nanoconfinement in anodic aluminum oxide membranes, phase behavior changes: the Colh–Iso transition is suppressed, and a new α3-relaxation appears, linked to dynamics in an adsorbed interfacial layer. DC conductivity drops by up to four orders of magnitude due to confinement effects, altered molecular orientation, and phase transitions—especially the emergence of a nematic-like state in DOPA16. These findings highlight the importance of molecular design, pore geometry, and surface chemistry in tuning ionic liquid crystal properties for advanced applications in nanofluidics, ion transport, and responsive materials. KW - Ionic Liquid Crystals PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-639657 DO - https://doi.org/10.1039/d5cp02406d SN - 1463-9084 SP - 1 EP - 17 PB - Royal Society of Chemistry (RSC) AN - OPUS4-63965 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Szymoniak, Paulina T1 - Bio-Based Vitrimers: Cracking the Code of Recyclability, Exchange Reactions and Flame Retardancy N2 - Vitrimers are a promising class of sustainable materials that offer an alternative to traditional epoxy thermosets in line with circular economy principles. Built on covalent adaptive networks (CANs), they can rearrange their chemical bonds in response to external stimuli, giving them properties like recyclability, shape-memory, and self-healing. These materials combine the strength of thermosets with the reprocessability of thermoplastics, making them attractive for next-generation applications. This study focuses on a bio-based vitrimer made from glycerol triglycidyl ether (GTE) and a vanillin-derived imine hardener (VA), which reacts through catalyst-free imine metathesis. To better understand the recyclability mechanisms of such systems, especially the dynamic bond exchange, we apply a comprehensive suite of techniques including dielectric spectroscopy, neutron scattering, mechanical analysis, and calorimetry. By linking molecular dynamics with macroscopic performance, the work aims to support the development of vitrimers as practical, recyclable materials. T2 - EPF2025 - European Polymer Congress CY - Groningen, The Netherlands DA - 22.06.2025 KW - Polymer recycling PY - 2025 AN - OPUS4-63859 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hülagü, Deniz A1 - Ermilova, Elena A1 - Weise, Matthias A1 - de Préville, Sophie A1 - Hoffmann, Johannes A1 - Morán‐Meza, José A1 - Piquemal, François A1 - Hertwig, Andreas T1 - Multimethod Electrical Characterization of Thin Indium Tin Oxide Films: Structuring and Calibration Sample Development for Scanning Probe Microscopy N2 - Indium tin oxide (ITO), a transparent conductive oxide, is widely used in optoelectronic applications due to its electrical conductivity, optical transparency, and chemical stability. This study employs spectroscopic ellipsometry (SE) to analyze ITO layers, enabling nondestructive determination of film thickness, dielectric functions, and bulk conductivity. Electrical properties derived from SE are compared with those obtained using the four‐point probe method (4PM) to improve metrological tools for nanotechnology applications and optimize deposition process monitoring for better control of film properties. This work also investigates the chemical stability of ITO layers under etching conditions and explores the development of new sheet resistance standards for scanning microwave microscopy (SMM). The results show that ITO resistivity, calculated from fitted SE data, increases with oxygen flow rate up to 5 cm3(STP) min−1. Good agreement is observed between sheet resistance values obtained by SE and 4PM up to 3 cm3(STP) min−1. Additionally, the sheet resistance values of a distinct set of microstructured ITO samples with different ITO layer thicknesses are determined by SMM, which are highly consistent with those obtained by the 4PM. KW - Ellipsometry KW - Indium tin oxide (ITO) KW - Scanning microwave microscopy (SMM) KW - Sheet resistance calibration standards KW - ITO wet etching PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626242 DO - https://doi.org/10.1002/pssa.202400871 SN - 1862-6300 VL - 222 IS - 14 SP - 1 EP - 18 PB - Wiley CY - Hoboken, New Jersey, USA AN - OPUS4-62624 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Szymoniak, Paulina T1 - Nanoscale Confinement Effects in Thin Films of Rigid-Backbone Polymers N2 - Thin polymer films play a crucial role in modern technologies, with applications spanning flexible electronics, membranes, coatings, and nanodevices. Their reduced dimensions result in unique physical behavior, often deviating significantly from bulk properties due to confinement and interfacial effects. In this study, we investigate how nanoscale confinement and polymer–substrate interactions influence the structural and dynamic properties of supported thin films of two rigid-backbone polymers: poly(bisphenol A carbonate) (PBAC) and polysulfone (PSU). Emphasis was placed on the development of adsorbed interfacial layers, molecular mobility, and the glass transition behavior as functions of film thickness and thermal history. Using a multimodal experimental approach—including Atomic Force Microscopy (AFM), Broadband Dielectric Spectroscopy (BDS), Differential and Fast Scanning Calorimetry (DSC, FSC), and Ellipsometry—we characterized adsorption kinetics, desorption processes, and segmental dynamics across a wide range of thicknesses and annealing conditions. Special attention was given to the formation and growth regimes of the adsorbed polymer layers, including a newly observed pre-growth stage, and their effect on thermal and dielectric relaxation behavior. To probe dynamics in ultrathin films, two dielectric electrode configurations—crossed electrode capacitors and nanostructured electrodes—were employed, enabling measurements down to 10 nm and isolated adsorbed layer. This comprehensive analysis provides insight into how one-dimensional confinement and interfacial interactions modulate macromolecular behavior, which is critical for the design of functional nanostructured polymeric systems in advanced applications. T2 - 10th International Discussion Meeting on Relaxations in Complex Systems (10thIDMRCS) CY - Barcelona, Spanien DA - 20.06.2025 KW - Thin films PY - 2025 AN - OPUS4-63858 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kamoun, E. A1 - Afifi, K. A1 - Szymoniak, Paulina A1 - Schönhals, Andreas A1 - Fahmy, Alaa T1 - Structure-property relationship of cross-linked chitosan-ethyl cellulose membranes N2 - Intensive research is focused on creating cost-effective, high-performance polyelectrolyte membranes (PEMs) for electrochemical devices designed to generate and/or store electrical energy. On the other hand, biopolymer materials have been utilized in a wide range of applications across medical and engineering fields, as well as in the textile and energy sectors. Therefore, in this study, chemically cross-linked chito-san/ethyl cellulose-citric acid (CS-EC-CA) membranes were prepared by a casting technique. The structure-property relationship of CS-EC/CA has been discussed based on the molar ratio of CS. The structural properties of the resultant membrane were characterized using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy, thermal stability was assessed using thermogravimetric analysis. Moreover, the ion exchange capacity (IEC) and water uptake of the membrane were studied. FTIR analysis revealed a significant broadening of absorption peaks in the range of 3200–3500 cm-1 , corresponding to -OH groups, presence of CA. A new peak at 1725 cm-1 confirmed the formation of chemical linkages between CA and CS-EC. The results of the thermal analysis revealed that a thermally stable membrane was obtained when it was chemically cross-linked compared to non-cross-linked membranes. The IEC values of the modified membranes were enhanced significantly, increasing from 0.08 mmol/g for pure CS to 0.5 mmol/g for CS (50%) and 0.8 mmol/g for CS (50%) cross-linked withCA. Furthermore, the cross-linked membranes demonstrated the lowest water and ethanol uptake values, emphasizing their suitability for fuel cell applications. KW - Polyelectrolyte membranes PY - 2025 DO - https://doi.org/10.1063/5.0279022 SN - 1089-7666 VL - 37 IS - 8 SP - 1 EP - 11 PB - AIP Publishing AN - OPUS4-63890 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nicolai, Marcel T1 - Investigating Lamb wave mode repulsion with a spring-based model N2 - Lamb waves are widely utilized in material characterization, non-destructive testing (NDT), and structural health monitoring (SHM). A unique feature of Lamb waves is mode repulsion, where dispersion curves approach each other but do not cross. This phenomenon is observed in both single and multilayer plates and is influenced by wave coupling. While mode repulsion in single plates has been linked to symmetry-breaking effects, its underlying mechanism in multilayer systems remains unclear. This study investigates mode repulsion in a coupled aluminum-polycarbonate plate system using a spring-based interface model. Dispersion curves are computed via the Scaled Boundary Finite Element Method, and time-domain simulations are used to analyze the interface dynamics. Results indicate that repulsion depends on interface stiffness, distinguishing between opening and closing repulsion regions. The study further reveals that mode repulsion corresponds to distinct oscillatory behaviors in the interface, where certain wave modes induce increased coupling spring elongation, leading to localized strain. A coupled harmonic oscillator model effectively explains opening repulsion regions but does not fully capture closing regions. Findings suggest that mode repulsion could be leveraged for non-destructive evaluation of adhesive interfaces, offering insights into bond strength characterization. This research contributes to a deeper understanding of wave interactions in multilayer structures and provides a theoretical foundation for advancing NDT and SHM techniques. T2 - ICU2025 - International Congress on Ultrasonics 2025 CY - Paderborn, Germany DA - 21.09.2025 KW - Lamb waves KW - Mode repulsion KW - Coupled plates KW - Dispersion curves KW - Elastic Interfaces PY - 2025 AN - OPUS4-64225 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Azimzada, Agil A1 - Meermann, Björn T1 - AF4/ICP-ToF-MS for the investigation of species-specific adsorption of organometallic contaminants on natural colloidal particles N2 - Organotin (OT) compounds, while crucial in many industrial applications, pose substantial risks to the environment and human health. The toxicity and environmental behaviour of OTs depend on their chemical form, i.e., the type and number of organic substituents. Each species thus exhibits distinct toxicity profiles and varying binding affinities to environmental colloids, which influence their mobility, bioavailability, and environmental impacts. To date, however, most studies addressed speciation and colloidal characterization separately, leaving the combined determinations of organometallics along with their carrier colloids largely elusive. Here, we develop and validate an on-line measurement system to quantify the adsorption dynamics of 10 OT species on natural colloidal particles (<500 nm). The approach integrates a versatile fractionation technique (AF4), with a state-of-the-art multi-element analyzer (ICP-ToF-MS), achieving Sn detection limits as low as 6.0 ng/L. The method separates colloid-free OT species from those bound to colloids and enables the determination of OT interactions with distinct colloidal fractions. Validated in both fractionation and detection, the method provides reliable data that could elucidate the species-specific and temporal aspects of species-colloids adsorption processes. The results feature comparative studies of 10 OT species, offering critical insights into OT mobility and distribution in environmental systems. KW - Fractionation KW - Speciation KW - Adsorption KW - Colloids KW - Organotin KW - AF4 KW - Nanoparticle characterization PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-625244 DO - https://doi.org/10.1016/j.jhazmat.2025.137320 SN - 1873-3336 VL - 488 SP - 1 EP - 11 PB - Elsevier B.V. AN - OPUS4-62524 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Engelhard, Carsten T1 - On ICP-MS with Nanosecond Time Resolution: From Nanoparticles to Microplastics N2 - In this presentation, recent developments in inductively coupled plasma mass spectrometry (ICP-MS) instrumentation for particle characterization in complex mixtures will be reviewed. The current state-of-the-art in single-particle (sp) ICP-MS instrumentation for the detection and characterization of nanoparticles (NP) and microplastics (MPs) as well as remaining challenges will be discussed. While millisecond dwell times were used in the advent of spICP-MS, the use of microsecond dwell times helped to improve nanoparticle data quality and particle size detection limits. We could show that a custom-built high-speed data acquisition unit with microsecond time resolution (μsDAQ) can be used to successfully address issues of split-particle events and particle coincidence, to study the temporal profile of individual ion clouds, and to extend the linear dynamic range by compensating for dead time related count losses. Our latest development is an in-house built data acquisition system with nanosecond time resolution (nanoDAQ). Recording of the SEM signal by the nanoDAQ is performed on the nanosecond time scale with a dwell time of approximately 2 ns and enables detection of gold nanoparticles (AuNP) as small as 7.5 nm with a commercial single quadrupole ICP-MS instrument. [1] Analysis of acquired transient data is based on the temporal distance between detector events and a derived ion event density. It was shown that the inverse logarithm of the distance between detector events is proportional to particle size. Also, the number of detector events per particle can be used to calibrate and determine the particle number concentration (PNC) of a nanoparticle dispersion. In addition to inorganic nanoparticles, first results on the detection of microplastics with spICP-MS will be discussed. T2 - ANAKON 2025 CY - Leipzig, Germany DA - 10.03.2025 KW - Nano KW - Microplastics KW - Nanoparticle Characterization KW - ICP-MS KW - Instrumentation PY - 2025 AN - OPUS4-63580 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -