TY - CONF A1 - Klewe, Tim T1 - Laser-based sorting of construction and demolition waste for the circular economy N2 - Closed material cycles and unmixed material fractions are required to achieve high recovery and recycling rates in the building industry. The growing diversity of construction and demolition waste is leading to increasing difficulties in separating the individual materials. Manual sorting involves many risks and dangers for the executing staff and is merely based on obvious, visually detectable differences for separation. An automated, sensor-based sorting of these building materials could complement or replace this practice to improve processing speed, recycling rates, sorting quality, and prevailing health conditions. A joint project of partners from industry and research institutions approaches this task by investigating and testing the combination of laser-induced breakdown spectroscopy (LIBS) and visual (VIS)/ near-infrared (NIR) spectroscopy. Joint processing of information (data fusion) is expected to significantly improve the sorting quality of various materials like concrete, main masonry building materials, organic components, etc., and may enable the detection and separation of impurities such as SO3-containing building materials (gypsum, aerated concrete, etc.). Focusing on Berlin as an example, the entire value chain will be analyzed to minimize economic/technological barriers and obstacles at the cluster level and to sustainably increase recovery and recycling rates. First LIBS measurements show promising results in distinguishing various material types. A meaningful validation shall be achieved with further practical samples. Future works will investigate the combination of LIBS and VIS/NIR spectroscopy in a fully automated measurement setup with conveyor belt speeds of 3 m/s. T2 - 6th fib Congress 2022 CY - Oslo, Norway DA - 12.06.2022 KW - LIBS KW - Recycling KW - Construction and demolition waste KW - Sorting PY - 2022 AN - OPUS4-55120 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klewe, Tim A1 - Völker, Tobias A1 - Götz, J. A1 - Landmann, M. A1 - Wilsch, Gerd A1 - Kruschwitz, Sabine T1 - Sorting of construction and demolition waste by combining LIBS with NIR spectroscopy N2 - In a joint project of partners from industry and research, the automated recycling of construction and demolition waste (CDW) is investigated and tested by combing laser-induced breakdown spectroscopy (LIBS) and near-infrared (NIR) spectroscopy. Joint processing of information (data fusion) is expected to significantly improve the sorting quality of various materials like concrete, main masonry building materials, organic components, etc., and may enable the detection and separation of impurities such as SO3-cotaining building materials (gypsum, aerated concrete, etc.). The project focuses primarily on the Berlin site to analyze the entire value chain, minimize economic/technological barriers and obstacles at the cluster level, and sustainably increase recovery and recycling rates. First measurements with LIBS and NIR spectroscopy show promising results in distinguishing various material types and indicate the potential for a successful combination. In addition, X-ray fluorescence (XRF) spectroscopy is being performed to obtain more information about the quantitative elemental composition of the different building materials. Future work will apply the developed sorting methodology in a fully automated measurement setup with CDW on a conveyor belt. T2 - NDT-CE 2022 CY - Zurich, Switzerland DA - 16.08.2022 KW - LIBS KW - NDT KW - Circular economy KW - Recycling KW - Material classification PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-555531 UR - http://www.ndt.net/?id=27220 VL - 2022/09 SP - 1 EP - 9 PB - NDT.net CY - Bad Breisig AN - OPUS4-55553 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klewe, Tim T1 - Sorting of construction and demolition waste by combining LIBS with NIR spectroscopy N2 - In a joint project of partners from industry and research, the automated recycling of construction and demolition waste (CDW) is investigated and tested by combing laser-induced breakdown spectroscopy (LIBS) and near-infrared (NIR) spectroscopy. Joint processing of information (data fusion) is expected to significantly improve the sorting quality of various materials like concrete, main masonry building materials, organic components, etc., and may enable the detection and separation of impurities such as SO3-cotaining building materials (gypsum, aerated concrete, etc.). The project focuses primarily on the Berlin site to analyze the entire value chain, minimize economic/technological barriers and obstacles at the cluster level, and sustainably increase recovery and recycling rates. First measurements with LIBS and NIR spectroscopy show promising results in distinguishing various material types and indicate the potential for a successful combination. In addition, X-ray fluorescence (XRF) spectroscopy is being performed to obtain more information about the quantitative elemental composition of the different building materials. Future work will apply the developed sorting methodology in a fully automated measurement setup with CDW on a conveyor belt. T2 - NDT-CE 2022 - The International Symposium on Nendestructive Testing in Civil Engineering CY - Zurich, Switzerland DA - 16.08.2022 KW - Material classification KW - Circular economy KW - LIBS KW - Recycling PY - 2022 AN - OPUS4-55554 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klewe, Tim A1 - Völker, Tobias A1 - Landmann, Mirko A1 - Wilsch, Gerd A1 - Kruschwitz, Sabine T1 - Laser-based sorting of construction and demolition waste for the circular economy N2 - Closed material cycles and unmixed material fractions are required to achieve high recovery and recycling rates in the building industry. The growing diversity of construction and demolition waste is leading to increasing difficulties in separating the individual materials. Manual sorting involves many risks and dangers for the executing staff and is merely based on obvious, visually detectable differences for separation. An automated, sensor-based sorting of these building materials could complement or replace this practice to improve processing speed, recycling rates, sorting quality, and prevailing health conditions. A joint project of partners from industry and research institutions approaches this task by investigating and testing the combination of laser-induced breakdown spectroscopy (LIBS) and visual (VIS)/ near-infrared (NIR) spectroscopy. Joint processing of information (data fusion) is expected to significantly improve the sorting quality of various materials like concrete, main masonry building materials, organic components, etc., and may enable the detection and separation of impurities such as SO3-containing building materials (gypsum, aerated concrete, etc.). Focusing on Berlin as an example, the entire value chain will be analyzed to minimize economic/technological barriers and obstacles at the cluster level and to sustainably increase recovery and recycling rates. First LIBS measurements show promising results in distinguishing various material types. A meaningful validation shall be achieved with further practical samples. Future works will investigate the combination of LIBS and VIS/NIR spectroscopy in a fully automated measurement setup with conveyor belt speeds of 3 m/s. T2 - 6th fib Congress 2022 CY - Oslo, Norway DA - 12.06.2022 KW - LIBS KW - Data fusion KW - Circular economy KW - Recycling KW - Material classification PY - 2022 SP - 1 EP - 7 AN - OPUS4-55555 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klewe, Tim A1 - Völker, Tobias A1 - Landmann, Mirko A1 - Kruschwitz, Sabine T1 - LIBS‐ConSort: Development of a sensor‐based sorting method for construction and demolition waste N2 - AbstractA joint project of partners from industry and research institutions approaches the challenge of construction and demolition waste (CDW) sorting by investigating and testing the combination of laser‐induced breakdown spectroscopy (LIBS) with near‐infrared (NIR) spectroscopy and visual imaging. Joint processing of information (data fusion) is expected to significantly improve the sorting quality of various materials like concrete, main masonry building materials, organic components, etc., and may enable the detection and separation of impurities such as SO3‐cotaining building materials (gypsum, aerated concrete, etc.)Focusing on Berlin as an example, the entire value chain will be analyzed to minimize economic / technological barriers and obstacles at the cluster level and to sustainably increase recovery and recycling rates.The objective of this paper is to present current progress and results of the test stand development combining LIBS with NIR spectroscopy and visual imaging. In the future, this laboratory prototype will serve as a fully automated measurement setup to allow real‐time classification of CDW on a conveyor belt. T2 - 21st Ibausil - International Conference on Building Materials CY - Weimar, Germany DA - 13.09.2023 KW - NDT KW - Material cassification KW - Recycling KW - LIBS KW - Data fusion KW - Construction and demolition waste KW - Circular economy PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-590734 DO - https://doi.org/10.1002/cepa.2866 SN - 2509-7075 VL - 6 IS - 6 SP - 973 EP - 976 PB - Ernst & Sohn GmbH AN - OPUS4-59073 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klewe, Tim T1 - LIBS ConSort: Development of a sensor-based sorting method for constuction and demolition waste N2 - Closed material cycles and unmixed material fractions are required to achieve high recovery and recycling rates in the building industry. In construction and demolition waste (CDW) recycling, the preference to date has been to apply simple but proven techniques to process large quantities of construction rubble in a short time. This is in contrast to the increasingly complex composite materials and structures in the mineral building materials industry. Manual sorting involves many risks and dangers for the executing staff and is merely based on obvious, visually detectable differences for separation. An automated, sensor-based sorting of these building materials could complement or replace this practice to improve processing speed, recycling rates, sorting quality, and prevailing health conditions. A joint project of partners from industry and research institutions approaches this task by investigating and testing the combination of laser-induced breakdown spectroscopy (LIBS) with near-infrared (NIR) spectroscopy and visual imaging. Joint processing of information (data fusion) is expected to significantly improve the sorting quality of various materials like concrete, main masonry building materials, organic components, etc., and may enable the detection and separation of impurities such as SO3-cotaining building materials (gypsum, aerated concrete, etc.) Focusing on Berlin as an example, the entire value chain will be analyzed to minimize economic / technological barriers and obstacles at the cluster level and to sustainably increase recovery and recycling rates. We present current advances and results about the test stand development combining LIBS with NIR spectroscopy and visual imaging. In the future, this laboratory prototype will serve as a fully automated measurement setup to allow real-time classification of CDW on a conveyor belt. T2 - 21. International Conference on Building Materials (Ibausil) CY - Weimar, Germany DA - 13.09.2023 KW - Material classification KW - Data fusion KW - Circular economy KW - LIBS KW - Recycling PY - 2023 AN - OPUS4-58495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine T1 - Verbesserung der Kreislaufwirtschaft im Bauwesen durch Bauwerksdiagnose: Ein Einblick in das Projekt REINCARNATE N2 - Das EU-finanzierte Projekt REINCARNATE, im Rahmen des Horizont Europa Programms, setzt neue Maßstäbe in der Kreislaufwirtschaft des Bauwesens durch den Einsatz fortschrittlicher Bauwerksdiagnose-Tools. Diese Werkzeuge, insbesondere die Zerstörungsfreie Prüfung (ZfP), spielen eine zentrale Rolle bei der Förderung der Zirkularität in der Baubranche. Die ZfP ermöglicht es, die Qualität und Eignung von Baumaterialien präzise zu bestimmen, ohne diese zu beschädigen. Dies ist entscheidend für die Wiederverwendung und das Recycling von Baustoffen und trägt wesentlich zur Reduzierung des Bauabfalls bei. Durch die Integration dieser Technologie in die Planungs- und Entwurfsphase können Architekten und Ingenieure aktiv einen nachhaltigeren Bauprozess fördern. REINCARNATE verbindet diese Diagnosemethoden mit digitalen Innovationen wie der Technologie des digitalen Zwillings und KI-gesteuerten Lösungen. Diese Kombination ermöglicht eine noch genauere und effizientere Bewertung und Nutzung von Baustoffen, was die Wiederverwendbarkeit und das Recycling verbessert. Im Rahmen des Projekts werden elf Demonstrationsprojekte in ganz Europa umgesetzt, die die praktische Anwendung dieser Technologien zeigen. Diese Projekte demonstrieren, wie ZfP und digitale Werkzeuge zusammenwirken, um Materialien, die traditionell als Abfall angesehen werden, in wertvolle Ressourcen umzuwandeln. Das Ziel von REINCARNATE ist eine 80-prozentige Verringerung der Bauabfälle und eine 70-prozentige Reduzierung des CO2-Fußabdrucks. Mit diesem Beitrag demonstrieren wir eine klare, umsetzbare Anleitung für die Bauindustrie, wie Innovationen in die Praxis umgesetzt werden können. Wir präsentieren greifbare Strategien zur Implementierung nachhaltiger, zirkulärer Praktiken im Bauwesen und markiert einen Wendepunkt in Richtung einer nachhaltigeren Bauindustrie. T2 - Fachtagung Bauwerksdiagnose 2024 CY - Berlin, Germany DA - 29.02.2024 KW - Concrete KW - Recycling KW - BIM KW - AI KW - NDT PY - 2024 AN - OPUS4-60620 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine T1 - How NDT and AI support Reincarnate N2 - Der Vortrag gibt eine Übersicht über aktuelle zerstörungsfreie Prüfmethoden, die verwendet werden können, um eine Zustandsbewertung von Bauteilen im Bestand vorzunehmen und mögliche Wiederverwendungsstrategien zu entwickeln. Ebenfalls zeigt der Vortrag, welche Möglichkeiten es gibt, künstliche Intelligenzmethoden zu verwenden, um aus recykelten Materialien wieder hochwertige, neue Baustoffe zu entwickeln. T2 - Stammtisch Nachhaltiges Bauen CY - Berlin, Germany DA - 23.05.2023 KW - Recycling KW - Zerstörungsfreie Prüfung KW - Kreislaufwirtschaft KW - Bauteile KW - Künstliche Intelligenz PY - 2023 AN - OPUS4-57710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine T1 - Laserinduzierte Plasmaspektroskopie (LIBS) im Bauwesen: Anwendungen, Potenziale und aktuelle Entwicklungen N2 - Die laserinduzierte Plasmaspektroskopie (LIBS) hat sich in den letzten Jahrzehnten als leistungsstarke Methode zur Materialcharakterisierung etabliert und bietet insbesondere im Bauwesen vielversprechende Anwendungsmöglichkeiten. Im Vergleich zur klassischen Nasschemie, die oft zeitaufwendig ist und einen hohen Laboraufwand erfordert, zeichnet sich LIBS durch Schnelligkeit, minimale Probenvorbereitung und das Potenzial zur mobilen Anwendung aus. Im Rahmen des Vortrags wird das im Jahr 2022 vom UA des FA ZfP im Bauwesen veröffentlichte DGZfP-Merkblatt B14 „Quantifizierung von Chlorid in Beton mit der laserinduzierten Plasmaspektroskopie (LIBS)“ vorgestellt und dessen Kerninhalte erläutert. Darüber hinaus werden aktuelle Themen präsentiert, die derzeit im UA von verschiedenen Partnern bearbeitet werden. Dazu gehören unter anderem der Einsatz von LIBS zur Elementanalyse von Schwefel im Zusammenhang mit biogener Schwefelsäurekorrosion sowie wissenschaftliche Fragestellungen wie die Identifizierung von Zementarten und -gehalten im Beton. Ein weiteres Highlight des Vortrags ist ein aktuelles multidisziplinäres Projekt, das den Einsatz von LIBS in Kombination mit hyperspektraler Bildgebung zur automatisierten Sortierung von Bau- und Abbruchabfällen untersucht. Ziel des Vortrags ist es, einem breiten Fachpublikum die Potenziale von LIBS im Bauwesen näherzubringen und die Diskussion über zukünftige Anwendungen und Entwicklungen anzuregen. T2 - DGZfP Jahrestagung 2025 CY - Berlin, Germany DA - 26.05.2025 KW - Chloride KW - Bauabfälle KW - Recycling KW - Sortierung KW - Laserinduzierte Plasmaspektroskopie KW - Bauwesen PY - 2025 AN - OPUS4-64123 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine T1 - Junior Research Group Materials Characterization and Informatics for Sustainability in Civil Engeneering (CE) N2 - Vorstellung der Themen der Nachwuchsgruppe "Materialcharakterisierung und -informatik für die Nachhaltigkeit im Bauwesen" von Prof. Sabine Kruschwitz (TU Berlin und BAM) T2 - Themenkonferenz Nachhaltiges Bauen CY - Berlin, Germany DA - 08.12.2022 KW - Recycling KW - NMR KW - Materialcharakterisierung KW - Data Science PY - 2022 AN - OPUS4-56648 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine T1 - Advanced Applications of 1H NMR Relaxometry in Building Material Characterization N2 - The presentation summarizes the 1H NMR relaxation pinciple for the nondestructive material characterization of building materials. We explain the basic principle of NMR and showcase 3 application cases: 1) Moisture transport and 2) In-situ pore size characteriztaion of buildiing materials and 3) Hydration characteristics of new, more climate friendly cementitious binders and mortars. T2 - NDT-CE 2025 - The International Symposium on Non-Destructive Testing in Civil Engineering CY - Izmir, Turkey DA - 24.09.2025 KW - 1H NMR KW - Nuclear magnetic resonance KW - Moisture transport, pore sizes KW - Building material KW - Nondestructive testing KW - Recycling PY - 2025 AN - OPUS4-64996 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine T1 - Accelerating Sustainable Material Development with SLAMD: Case Studies Using Recycled and Bio-Based Materials N2 - As part of the EU Reincarnate project, BAM has developed an AI-based tool that signifi-cantly accelerates the development of materials in an iterative process of laboratory work, experimental validation, and data-driven optimization. This approach has already been suc-cessfully tested and validated. In Reincarnate SLAMD is currently being applied in demon-stration projects together with two industrial partners – a recycling company specializing in construction and demolition waste and a leading supplier of cement-based building materi-als. The recycling company aims to process recycled concrete fines and glass waste into composite cements with improved performance characteristics. The building materials' manufacturer, on the other hand, aims to reuse processed concrete waste primarily as aggre-gate and to develop suitable materials for five different exposure classes. The integration of SLAMD is envisioned to enable the rapid identification of optimal material compositions that consider the performance and ecological and economic aspects. In addition, we currently further develop in the Circular B-I/O project, a joint effort with African partners to develop alternative, more biobased building materials. The goal is to integrate agricultural residues – such as corn cobs, rice hulls, and sugarcane bagasse – into large-scale, robust supply chains for the construction industry. AI-driven decision-making will be used to create a sustainable framework to transform these seasonally variable raw materials into reliable, high-performance concrete components. Building stable ecosystems and supply chains is crucial to ensure the continuous availability of sustainable materials for a resilient and circular construction industry. T2 - 2nd Net-zero-future Conference CY - Cape Town, South Africa DA - 05.11.2025 KW - Data-driven Design KW - Sustainable Materials KW - Recycling PY - 2025 AN - OPUS4-64952 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine A1 - Völker, Christoph A1 - Munsch, Sarah Mandy A1 - Klewe, Tim A1 - Zia, Ghezal Ahmad Jan A1 - Schumacher, Katrin A1 - Yared, Kaleb A1 - Schmidt, Wolfram T1 - KI und Robotik im Dienst der Nachhaltigkeit: Beschleunigung innovativer Lösungen im Bausektor N2 - Der Vortrag beschäftigt sich mit der Implementierung fortschrittlicher Technologien in neue Wertschöpfungsketten im Bausektor, insbesondere im Bereich Recycling, zirkuläres Produktdesign und Lebenszustandsanalyse. Im Zentrum stehen Industrie- und Grundlagenforschungsprojekte an der Schnittstelle zwischen Wissenschaft und praktischer Anwendung. T2 - DigiCon 2024 CY - Munich, Germany DA - 21.11.2024 KW - KI KW - Materialdesign KW - Recycling KW - Baumaterial PY - 2024 AN - OPUS4-61800 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -