TY - CONF A1 - Romero-Navarrete, José A. T1 - An energy frame of reference to assess vehicle´s physical externalities (IMECE 2020-23745) N2 - As a result of the vehicle – infrastructure interaction, both systems deteriorate. The development of performance measures about such effects, is critical to find ways to mitigate these systems deterioration. We propose an energy approach to such an assessment: The transient energy stored in the pavement. The transient strain energy stored in the vehicle suspension. T2 - IMECE 2020 CY - Online meeting DA - 16.11.2020 KW - Energy KW - Frame KW - Assess KW - Vehicles PY - 2020 AN - OPUS4-51642 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank A1 - Komann, Steffen T1 - Aktuelle Entwicklungen und Prüfungen der BAM N2 - Es werden im Rahmen des Vortrages die aktuellen Prüftätigkeiten und Arbeitsschwerpunkte der BAM vorgestellt. Des Weiteren wird darüber berichtet was es Neues in der aktuellen Normen- und Richtlinienentwicklung gibt. T2 - Informationsveranstaltung zum Transport radioaktiver Stoffe CY - Online meeting DA - 14.04.2021 KW - Gefahrgutregeln der BAM KW - Fallprüfungen KW - Radioaktive Materialien KW - Zulassung PY - 2021 AN - OPUS4-52493 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Orellana Pérez, Teresa T1 - European strategies, networks, projects, committees and initiatives & associations for promoting hydrogen safety and education N2 - This lecture shows an overview of cross-cutting topics whithin the dynamic sector of hydrogen technologies including European and other international strategies, legal and policy frameworks, networks and relevant stakeholders, research and demo-projects, regulations, codes & Standards as well as initiatives and associations concerning hydrogen safety and education. T2 - Joint European Summer School on Fuel Cell, Electrolyser and Battery Technologies JESS 2021 CY - Online meeting DA - 12.09.2021 KW - Hydrogen KW - Cross-cutting issues KW - Competence centre H2Safety@BAM PY - 2021 AN - OPUS4-54199 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - el Dsoki, Chalid T1 - Anforderungen für den Transport kritisch-defekter Lithiumbatterien nach Sondervorschrift 376 N2 - Die BAM legt als zuständige Behörde die zusätzlichen Prüfanforderungen an die verwendeten Verpackungen/ Großverpackungen nach P 911 und LP 906 fest (Teil A dieser BAM-GGR). Außerdem kann die BAM gemäß Sondervorschrift 376 davon abweichende alternative Verpackungs- und/oder Beförderungsbedingungen zulassen (Einzelfallfestlegung,Teil B dieser BAM-GGR). T2 - 19. Gefahrgut Technik Tage CY - Berlin, Germany DA - 16.11.2023 KW - Gefahrgutregel Transport kritische Batterien PY - 2023 AN - OPUS4-59067 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rolle, Annette A1 - Wille, Frank ED - Czarwinski, R. T1 - Radioaktive Stoffe in besonderer Form-wichtige Aspekte im Zulassungsverfahren N2 - Für die Beförderung von umschlossenen radioaktiven Stoffen (Strahler) können Transporterleichterungen gelten, wenn das Strahlerdesign nachweislich unfallsicher ausgelegt ist und eine Zulassung als radioaktiver Stoff in besonderer Form vorliegt. Die in Deutschland zuständige Behörde für die Prüfung und Zulassung radioaktiver Stoffe in besonderer Form ist die Bundesanstalt für Materialforschung und –prüfung (BAM). Eine oft langfristige Nutzung der Strahler kann eine alterungsbedingte Schwächung der Umschließung des radioaktiven Stoffes zur Folge haben. Jeder Strahler einer zugelassenen Bauart muss jedoch im Beförderungsfall zu jeder Zeit, auch nach längerer Nutzung, den vorgeschriebenen Prüfanforderungen genügen. Die Alterungsbewertung auf der Grundlage einer vom Antragsteller zu spezifizierenden Nutzungsdauer des radioaktiven Stoffes in besonderer Form ist seit langer Zeit Bestandteil des Zulassungsverfahrens in Deutschland. Ein von Deutschland eingebrachter Vorschlag im Rahmen der anstehenden Revision der IAEA Empfehlungen für die sichere Beförderung von radioaktiven Stoffen (SSR-6) soll die Lesbarkeit des Regelwerkes bezüglich der Alterungsbewertung verbessern, Klarheit über die damit verbundenen Anforderungen erzeugen und damit zu einer Harmonisierung der Zulassungsverfahren auf internationaler Ebene beitragen. In diesem Beitrag sollen wichtige Einflussfaktoren auf das Alterungsverhalten von radioaktiven Stoffen in besonderer Form aufgezeigt und die Notwendigkeit für die Spezifikation einer Nutzungsdauer als Grundlage für die Alterungsbewertung begründet werden. Der deutsche Vorschlag für die Revision des IAEA Regelwerks zum sicheren Transport radioaktiver Stoffe (SSR-6) wird vorgestellt und erläutert. T2 - Jahrestagung des FS 2022 CY - Konstanz, Germany DA - 26.09.2022 KW - Strahlenschutz KW - Radioaktive Stoffe KW - Beförderung KW - Zulassung PY - 2022 SN - 1013-4506 SP - 15 EP - 20 PB - Fachverband für Strahlenschutz e.V. CY - Berlin AN - OPUS4-56134 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rolle, Annette T1 - Radioaktive Stoffe in besonderer Form - wichtige Aspekte im Zulassungsverfahren N2 - Für die Beförderung von umschlossenen radioaktiven Stoffen (Strahler) können Transporterleichterungen gelten, wenn das Strahlerdesign nachweislich unfallsicher ausgelegt ist und eine Zulassung als radioaktiver Stoff in besonderer Form vorliegt. Die in Deutschland zuständige Behörde für die Prüfung und Zulassung radioaktiver Stoffe in besonderer Form ist die Bundesanstalt für Materialforschung und –prüfung (BAM). Eine oft langfristige Nutzung der Strahler kann eine alterungsbedingte Schwächung der Umschließung des radioaktiven Stoffes zur Folge haben. Jeder Strahler einer zugelassenen Bauart muss jedoch im Beförderungsfall zu jeder Zeit, auch nach längerer Nutzung, den vorgeschriebenen Prüfanforderungen genügen. Die Alterungsbewertung auf der Grundlage einer vom Antragsteller zu spezifizierenden Nutzungsdauer des radioaktiven Stoffes in besonderer Form ist seit langer Zeit Bestandteil des Zulassungsverfahrens in Deutschland. Ein von Deutschland eingebrachter Vorschlag im Rahmen der anstehenden Revision der IAEA Empfehlungen für die sichere Beförderung von radioaktiven Stoffen (SSR-6) soll die Lesbarkeit des Regelwerkes bezüglich der Alterungsbewertung verbessern, Klarheit über die damit verbundenen Anforderungen erzeugen und damit zu einer Harmonisierung der Zulassungsverfahren auf internationaler Ebene beitragen. In diesem Beitrag sollen wichtige Einflussfaktoren auf das Alterungsverhalten von radioaktiven Stoffen in besonderer Form aufgezeigt und die Notwendigkeit für die Spezifikation einer Nutzungsdauer als Grundlage für die Alterungsbewertung begründet werden. Der deutsche Vorschlag für die Revision des IAEA Regelwerks zum sicheren Transport radioaktiver Stoffe (SSR-6) wird vorgestellt und erläutert. T2 - Jahrestagung des FS 2022 CY - Konstanz, Germany DA - 26.09.2022 KW - Strahlenschutz KW - Radioaktive Stoffe KW - Beförderung KW - Alterung KW - Zulassung PY - 2022 AN - OPUS4-56137 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Qiao, Linan A1 - Nagelschmidt, Sven A1 - Herbrich, Uwe A1 - Keller, Christian T1 - Introduction of a Power Law Time-Temperature Equivalent Formulation for the Description of Thermorheologically Simple and Complex Behavior N2 - Abstract: In this work, a conceptual framework is suggested for analyzing thermorheologically simple and complex behavior by using just one approach. Therefore, the linear relation between master time and real time which is required in terms of the time-temperature superposition principle was enhanced to a nonlinear equivalent relation. Furthermore, we evaluate whether there is any relation among well-known existing time-temperature equivalent formulations which makes it possible to generalize different existing formulations. For this purpose, as an example, the power law formulation was used for the definition of the master time. The method introduced here also contributes a further framework for a unification of established time-temperature equivalent formulations, for example the time-temperature superposition principle and time-temperature parameter models. Results show, with additional normalization conditions, most of the developed time-temperature parameter models can be treated as special cases of the new formulation. In the aspect of the arrow of time, the new defined master time is a bended arrow of time, which can help to understand the corresponding physical meaning of the suggested method. KW - bended arrow of time KW - time-temperature superposition principle KW - time-temperature equivalent formulation PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-543800 DO - https://doi.org/10.3390/ma15030726 VL - 15 IS - 3 SP - 1 EP - 11 PB - MDPI AN - OPUS4-54380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Graeber, Gustav T1 - Paste-like interlayers in alkali-metal battery anodes N2 - Giving an introduction to high-temperature batteries with molten alkali-metal anodes and solid electroyltes. Presenting the research on alkali-metal tensiometry and the study about wetting interactions between liquid alkali-metal alloys and porous carbon hosts. T2 - AG Christina Roth Seminar CY - Bayreuth, Germany DA - 16.07.2025 KW - Battery PY - 2025 AN - OPUS4-64069 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Graeber, Gustav T1 - Graeber Lab for Energy Research at Tag der Chemie in Adlershof N2 - Highlighting recent progress in the Graeber Lab for Energy Research in the areas of alkali-metal tensiometry, alkali-metal anodes in contact with solid electrolytes, sulfur cathodes and solid electrolyte synthesis. T2 - Tag der Chemie in Adlershof 2025 CY - Berlin, Germany DA - 03.07.2025 KW - Batterie PY - 2025 AN - OPUS4-64068 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Graeber, Gustav T1 - Paste-like alkali-metal anodes in contact with solid electroytes N2 - Explaining the motivation of the BMFTR ANaBatt project. Presenting recent advances in alkali metal tensiometry and characterization of alkali-metal wetting in porous carbon materials via X-ray computed tomography. T2 - Sodium Battery Symposium 6 CY - Dresden, Germany DA - 03.09.2025 KW - Battery PY - 2025 AN - OPUS4-64070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Graeber, Gustav T1 - Batterieforschung an der Humboldt-Universität zu Berlin - Selbstvorstellung beim KLiB N2 - Selbstvorstellung der Batterieforschungsaktivitäten der HU Berlin in Kooperation mit lokalen Partnern wie der BAM im Rahmen eines Netzwerktreffens. Fokus auf die Forschung in der Arbeitsgruppe Graeber zu Festkörperbatterien und der Arbeitsgruppe Adelhelm zu Natrium-Ionen-Batterien. T2 - KLiB Netzwerktreffen CY - Frankfurt, Germany DA - 26.03.2025 KW - Batterie PY - 2025 AN - OPUS4-63350 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Graeber, Gustav T1 - Graeber Lab for Energy Research - Overview N2 - Vorstellung der Forschungsaktivitäten der AG Graeber an der HU Berlin und an der BAM. Diese beinhalten die Erforschung grundlegender Benetzungsphänomene von Alkalimetallen, deren Anwendung in Festkörperbatterien mit pastenartigen Alkalimetallanoden, die Erforschung von Schwefelkathoden, die Synthese von Natrium-leitenden Festelektrolyten sowie die Entwicklung von Hydrogel-basierten Batterien. T2 - BMBF BattFutur NanoMatFutur Netzwerktreffen 2025 CY - Berlin, Germany DA - 24.02.2025 KW - Batterie PY - 2025 AN - OPUS4-63361 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Qi, Naiyu A1 - Somaskandan, Rachana A1 - Graeber, Gustav T1 - High-Precision Surface Tension Measurements of Sodium, Potassium, and Their Alloys via Du Noüy Ring Tensiometry N2 - The development of post-lithium-ion batteries has sparked significant interest in alkali-metal anodes, particularly sodium (Na), potassium (K), and sodium−potassium (Na−K) alloys. Na−K alloys are promising for partially liquid anodes due to their unique low melting points. A critical factor influencing Na−K-based anode performance is wetting behavior, which governs electrical conductivity, mechanical contact, and long-term stability. At the heart of wetting lies surface tension, a fundamental property of solid−liquid− gas interactions. However, the surface tension of alkali metals and their alloys, particularly Na−K systems, remains poorly understood due to experimental and theoretical challenges. This study bridged these gaps by employing Du Noüy ring tensiometry for the first time in alkali-metal systems to measure the surface tension of Na, K, and Na−K alloys across temperatures from ambient to 180 °C. A key innovation in this work is the development of the push-in Du Noüy method, which provided significantly higher precision and reliability compared to the traditional pull-out technique, without requiring a correction factor. The measured surface tension decreased with increasing temperature for the studied Na−K alloys. For instance, for a eutectic Na−K mixture, the surface tension decreases from 121.7 mN m−1 to 112.2 mN m−1 when increasing the temperature from ambient to 180 °C. Additionally, this study presented the first use of Gibbs free energy minimization to model the surface tension of the Na−K system. The robust method significantly enhanced the predictive accuracy compared to the previous simplified model, reducing deviations from 25% to 2%. Our findings reveal that surface tension increases with sodium mole fraction in the bulk phase, yet the surface monolayer remains potassium-rich, indicating non-ideal surface behavior. This study deepens the understanding of alkali-metal wetting behavior, providing valuable insights for designing optimized interfaces in next-generation semi-solid alkali-metal batteries. KW - Sodium−potassium alloy KW - Liquid-metal anodes KW - Alkali metal KW - Batteries KW - Surface tension PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630102 DO - https://doi.org/10.1021/acsami.5c02183 SN - 1944-8252 VL - 17 IS - 17 SP - 25985 EP - 25995 PB - American Chemical Society (ACS) CY - Washington, DC AN - OPUS4-63010 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - Package safety evaluation in a rapidly changing world N2 - The presentation addressed the evolving challenges and developments in the safety evaluation of transport packages for radioactive materials, especially in light of changing technologies, regulations, and environmental conditions. A key focus was the current situation in Germany: following the final shutdown of commercial nuclear power plants in 2023, efforts are now concentrated on decommissioning, interim storage in dual-purpose casks (DPCs), and the ongoing site selection process for a repository for high-level waste. The expected duration of interim storage exceeds 100 years, demanding robust and sustainable safety strategies. One major topic was ageing management, which goes beyond technical measures to ensure transportability over long periods. It also includes preserving knowledge and expertise for future generations. The regulatory framework includes international standards such as IAEA SSR-6 and SSG-26, as well as national guidance like BAM-GGR 023. It was emphasized the growing role of Artificial Intelligence (AI) in safety evaluations. AI can enhance efficiency through automated document analysis and digital data structuring. However, final safety decisions remain the responsibility of human experts, especially given the complexity of documentation and the shortage of skilled personnel. The presentation also addressed changing transport technologies, such as the use of electric and hydrogen-powered vehicles. These vehicles behave differently in accidents, particularly in battery fires, which can reach temperatures above 1000 °C and last significantly longer than conventional fires. This raises the need to reassess existing fire test criteria. Environmental changes were another key point. With global temperatures rising by 0.26 °C per decade, local safety margin evaluations are becoming increasingly important. Existing regulatory assumptions, such as ambient temperatures of 38 °C, may no longer be sufficient. Finite Element Analysis (FEA) is increasing. AI can support model generation, but there is concern about potential skill fading among engineers. Physical testing, such as BAM’s drop towers (up to 200 tons), remains essential for public package safety acceptance. Key takeaways from the talk include: Ageing Management is also about preserving skills and knowledge. Changing technologies and environmental conditions impact package safety. AI can improve efficiency but must be used carefully to avoid skill loss. Physical testing continues to play a vital role in gaining public trust. T2 - PATRAM 2025 CY - San Antonio, Texas, USA DA - 27.07.2025 KW - Artificial Intelligence KW - Package KW - Ageing Management KW - Electric Vehicles KW - Testing PY - 2025 AN - OPUS4-63879 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Graeber, Gustav T1 - Batterien und Elektrolyseure der nächsten Generation N2 - Übersichtvortrag zu Batterien und Elektrolyseuren. Ausgehend vom Funktionsprinzip von klassischen Lithium-Ionen-Zellen wurde deren Aufbau und die verwendeten Aktivmaterialien eingeführt. Im Anschluss wurde auf nachhaltigere Alternativtechnologien wie Natrium-Ionen und Natrium-Schwefel eingegangen. Immer mit dem Fokus auf den verwendeten Materialien und den umweltrelevanten Aspekten. T2 - BAM UBA Behördenerfahrungsaustausch Anlagensicherheit 2025 CY - Berlin, Germany DA - 02.06.2025 KW - Batterie PY - 2025 AN - OPUS4-63355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - KI-Einsatz im gefahrgutrechtlichen Kontext N2 - Der Vortrag behandelt den Einsatz von Künstlicher Intelligenz im gefahrgutrechtlichen Kontext und beleuchtet deren Potenzial zur Effizienzsteigerung in ressourcenlimitierten Umgebungen. Anwendungsfelder an der BAM umfassen die Datenanalyse zur Verpackungssicherheit, die Automatisierung von Zulassungs- und Genehmigungsprozessen, die Unterstützung bei der Mitarbeit an Normen und Regelwerken sowie die Bearbeitung komplexer Forschungsfragen. Herausgestellt wird die wachsende Datenmenge und Komplexität in der Gremienarbeit (z. B. UN-Regelwerke), die manuelle Auswertung ineffizient macht. KI-gestützte Methoden wie LLM, RAG und Knowledge Graphs sollen digitale Qualitätsinfrastrukturen unterstützen, die Dokumenten- und Datenanalyse beschleunigen, ohne die menschliche Verantwortung für Sicherheitsbewertungen zu ersetzen. Zentrale Herausforderungen sind die Black-Box-Natur von KI, mögliche Halluzinationen, sowie die Sicherstellung von Reliabilität und Compliance. Ein innovativer Ansatz wird für die wiederkehrende Prüfung von Gasdruckspeichern vorgestellt: Durch die Kombination zerstörungsfreier Prüfungen mit ML-gestützter Datenanalyse können Sicherheitsreserven ausgewiesen und Kosten deutlich reduziert werden. T2 - 20. Gefahrgut-Technik-Tage CY - Berlin, Germany DA - 13.11.2025 KW - Artificial Intelligence KW - RAG KW - LLM PY - 2025 AN - OPUS4-64864 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Graeber, Gustav T1 - Using X -ray computed tomography to learn more about alkali -metal batteries: Trajectory towards operando analysis N2 - Here we discuss how X-ray computed tomography can be used to learn more about alkali-metal batteries. We show wetting phenomena in alkali-metal batteries, discuss various techniques to study them, and show our recent results obtained at DESY in Hamburg. T2 - Operando battery workshop at CSMB CY - Berlin, Germany DA - 17.09.2025 KW - Battery KW - X-ray computed tomography KW - Operando PY - 2025 AN - OPUS4-64468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Graeber, Gustav T1 - Wetting and phase change phenomena in alkali -metal batteries N2 - Presentation about the importance of wetting and phase change phenomena in batteries. Hihglighting our work on Du Noüy ring tensiometry of alkali metals and wetting studies of alkali metals in contact with porous carbon hosts in alkali metal batteries with solid electrolytes. T2 - International Battery Workshop (ASPIRE, TwinBat) CY - Berlin, Germany DA - 15.9.2025 KW - Battery KW - Sodium KW - Wetting PY - 2025 AN - OPUS4-64467 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Baller, Johannes A1 - Hilger, André A1 - Qi, Naiyu A1 - Morini, Chiara A1 - Cornelio, Andrea A1 - Remhof, Arndt A1 - Osenberg, Markus A1 - Manke, Ingo A1 - Moosmann, Julian A1 - Beckmann, Felix A1 - Graeber, Gustav T1 - Wetting Interactions Between Porous Carbon Hosts and Liquid Sodium‐Potassium Alloys Toward Their Use in Negative Electrodes of Alkali‐Metal Batteries N2 - Batteries with liquid alkali‐metal negative electrodes offer a route to compact, high‐performance energy storage. Innovation in alkali‐metal management, i.e., controlled storage, release and transport of liquid alkali metal, can enable simpler and cheaper cell designs. Porous carbons have emerged as potential host materials for liquid alkali metals. Here, X‐ray computed tomography is used to study the wetting interactions between porous carbon hosts and liquid sodium‐potassium alloy (NaK) as a function of carbon host morphology and surface functionalization. While as‐received carbon samples show no affinity toward NaK, heat‐treated carbon is spontaneously infiltrated with NaK filling almost the entire pore volume. It is explored how forced wetting partially fills pores of NaK‐repellant hosts, showing large differences in pore filling based on the average pore size of the host material. In electrochemical discharge experiments, it is shown that both as‐received and heat‐treated carbon felt enable high areal capacities beyond 40 mAh cm−2. However, the heat‐treated carbon shows ten times lower overpotential. Finally, it is demonstrated how heat‐treated carbon felt can enable capillary transport of NaK. In summary, this study elucidates important aspects of the interactions between liquid alkali metals and porous carbon hosts, generating insights into possible applications in liquid alkali‐metal batteries. KW - Battery KW - Solid electrolyte KW - Sodium KW - Wetting PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-644663 DO - https://doi.org/10.1002/adfm.202523169 SN - 1616-301X SP - 1 EP - 10 PB - Wiley VHC-Verlag AN - OPUS4-64466 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müllner, S. A1 - Held, T. A1 - Tichter, Tim A1 - Rank, P. A1 - Leykam, D. A1 - Jiang, W. A1 - Lunkenbein, T. A1 - Gerdes, T. A1 - Roth, C. T1 - Impact of Functional Groups in Reduced Graphene Oxide Matrices for High Energy Anodes in Lithium-Ion Batteries N2 - Most high capacity anode materials for lithium-ion batteries (LiB) require a carbonaceous matrix. In this context one promising material is reduced graphene oxide (rGO). Herein, we present the influence of different reduction degrees of rGO on its physico-chemical properties, such as crystallinity, specific surface area, electrical conductivity and electrochemical lithiation/delithiation behavior. It is found that a heat treatment under inert and reducing atmospheres increases the long-range order of rGO up to a temperature of 700 °C. At temperatures around 1000 °C, the crystallinity decreases. With decreasing oxygen content, a linear decrease in irreversible capacity during cycle 1 can be observed, along with a significant increase in electrical conductivity. This decrease in irreversible capacity can be observed despite an increase in specific surface area indicating the more significant influence of the oxygen content on the capacity loss. Consequently, the reversible capacity increases continuously up to a carbon content of 84.4 at% due to the thermal reduction. Contrary to expectations, the capacity decreases with further reduction. This can be explained by the loss of functional groups that will be lithiated reversibly, and a simultaneous reduction of long-range order, as concluded from dq/dU analysis in combination with XRD analysis. KW - Batteries KW - Functional Materials KW - Graphene Oxide PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-606852 DO - https://doi.org/10.1149/1945-7111/ace70a SN - 0013-4651 VL - 170 IS - 7 SP - 1 EP - 12 PB - The Electrochemical Society AN - OPUS4-60685 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai T1 - Hydrogen - Trust through safety N2 - In den Virtual Talks der DECHEMA wurden allgemeine Aspekte der Sicherheit und Akzeptanz von Wasserstofftechnologien vorgestellt. Wie kann Vertrauen in neue Technologien geschaffen werden, wenn Unfälle aus der Vergangenheit zu Mythen und Märchen führten? Der Vortrag räumt mit allgemeinen Vorurteilen auf und zeigt, dass der Umgang mit Wasserstoff weder unsicherer, noch sicherer ist als der Umgang mit anderen Brenngasen. Basis für den sicheren Umgang mit Wasserstoff ist immer eine Risikoanalyse. N2 - In the DECHEMA Virtual Talks, general aspects of the safety and acceptance of hydrogen technologies were presented. How can trust in new technologies be built when past accidents led to myths and fairy tales? The presentation does away with general prejudices and shows that handling hydrogen is neither more unsafe nor safer than handling other fuel gases. The basis for the safe handling of hydrogen is always a risk analysis. T2 - DECHEMA Virtual Talks CY - Online meeting DA - 23.11.2020 KW - Hydrogen KW - Wasserstoff KW - Safety KW - Sicherer Umgang KW - Sicherheit PY - 2020 AN - OPUS4-52082 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nitz, Phillip D. H. A1 - Rosaz, Paul A1 - Kreysina, Daniela A1 - Kasprzak, Dawid A1 - Qi, Naiyu A1 - Baller, Johannes A1 - Graeber, Gustav T1 - Water-in-Salt Electrolytes Embedded in Polyacrylamide Hydrogels: A First Step toward Deformable Sodium-Ion Batteries N2 - The development of flexible, safe, and sustainable Energy storage systems is critical for next-generation technologies, including wearable electronics, biomedical devices, and soft robotics. In this work, we provide a systematic investigation of sodium perchlorate-based water-in-salt (WIS) electrolytes embedded in polyacrylamide (PAM) hydrogels as a potential platform for deformable sodium-ion batteries or aqueous supercapacitors. Using Raman spectroscopy, we track the transition from free to intermediate water states with increasing salt concentration, identifying the onset of the WIS regime around 10 mol kg−1. Electrochemical measurements reveal that both the aqueous and hydrogel-based electrolytes exhibit a broadened electrochemical stability window (ESW) at higher salt concentrations, reaching up to 2.75 V. Impedance spectroscopy shows that while aqueous electrolytes achieve higher peak conductivity (156 mS cm−1), hydrogel-based electrolytes offer greater stability across a range of concentrations. This observation was supported by cyclic voltammetry, as it showed enhanced electrochemical stability of the PAM hydrogel compared to the aqueous electrolyte. This comprehensive and systematic study demonstrates that highly concentrated WIS electrolytes can be successfullyembedded into PAM hydrogels, while preserving good electrochemical stability and ionic conductivity. This could make them a promising foundation for all-hydrogel, sodium-based energy storage devices that are safe, sustainable, and mechanically compliant. KW - Battery PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653156 DO - https://doi.org/10.1021/acsapm.5c03031 SN - 2637-6105 SP - 1 EP - 8 PB - American Chemical Society (ACS) AN - OPUS4-65315 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cornelio, Andrea T1 - NASICON Electrolytes for Room-Temperature Sodium-Sulfur Batteries with NaK Alloy Negative Electrode Interface N2 - The aim of the research is to develop a novel NASICON (NA Super Ionic CONductor) electrolyte for room-temperature (RT) sodium-sulfur (Na-S) cells employing a liquid sodium-potassium (NaK) alloy at the negative-electrode interface. The NaK alloy can improve the interfacial contact between the sodium-metal electrode and the solid electrolyte. The synthesized NASICON material must be stable with the alkali-metal alloy and provide good electrochemical performance at RT. T2 - 6th Sodium Battery Symposium CY - Dresden, Germany DA - 03.09.2025 KW - Solid Electrolyte KW - NASICON KW - Solid-state batteries KW - Sodium conductors KW - Material synthesis PY - 2025 AN - OPUS4-64080 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cornelio, Andrea T1 - NASICON Electrolytes for Room-Temperature Sodium-Sulfur Batteries: from Material Synthesis to Cell Testing N2 - Solid electrolytes (SE) allow to employ alkali-metal negative electrodes (NE) in new cell concepts, increasing energy density and safety of batteries for stationary and portable applications. The aim of this research is to develop a novel NASICON (NA Super Ionic CONductor) electrolyte for room-temperature (RT) sodium-sulfur (Na-S) cells employing a liquid sodium-potassium (Na-K) alloy at the SE/NE interface. The Na-K alloy can improve the interfacial contact between the sodium-metal NE and the SE. T2 - Batterieforum Deutschland 2026 CY - Berlin, Germany DA - 20.01.2026 KW - NASICON KW - Solid Electrolytes KW - Synthesis KW - Characterization KW - Na batteries KW - Electrochemical testing PY - 2026 AN - OPUS4-65423 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - BAM-Testzentrum Wasserstoffsicherheit - Reallabore und Materialprüfung N2 - Der Vortrag gibt einen kompakten Überblick über das BAM-Testzentrum Wasserstoffsicherheit und seine Rolle bei der Forschung, Prüfung und Entwicklung sicherheitsrelevanter Technologien entlang der gesamten Wasserstoff-Wertschöpfungskette. Das Kompetenzzentrum H2Safety@BAM vereint wissenschaftliche Expertise, einmalige Infrastruktur und praxisnahe Reallabore, um Vertrauen in Wasserstoff als zukünftigen Energieträger zu schaffen. Im Mittelpunkt steht das Testgelände für Technische Sicherheit, das mit 12 km² zu den umfassendsten europäischen Einrichtungen für Sicherheitstests im Realmaßstab zählt. Dazu gehören eine Wasserstofftankstelle, Wasserstoffnetze im Reallabormaßstab, Prüfstände für Kryotechnik, Brand- und Explosionsversuche sowie eine im Bau befindliche Anlage zur Druckbehälterprüfung. Die Infrastruktur ermöglicht Freistrahlversuche, Jetflame-Tests sowie Untersuchungen für 1000-bar-Systeme. Im Reallabor Wasserstoffnetze werden Materialien, Gasqualitäten, dynamische Strömungsszenarien und Komponenten unter realistischen und kritischen Bedingungen untersucht, um die sichere Integration von Wasserstoff in bestehende und neue Pipelineinfrastrukturen zu ermöglichen. Parallel dazu schafft das Reallabor Wasserstofftankstelle die Grundlage für neue digitale Methoden der Qualitätsinfrastruktur von Sensornetzwerken über Echtzeit-Datenerfassung bis zur Anlagenüberwachung. Ein Beispiel ist die Optimierung von Betankungsprozessen mittels Digital Twin, die eindrucksvoll demonstriert, wie die Sicherheit bei Schnellbetankungen aufgezeigt werden kann. Mit Blick auf die Zukunft adressiert die BAM zudem die Sektorenkopplung. Datengetriebene Ansätze, KI und digitale Zwillinge sollen den sicheren und effizienten Betrieb von Elektrolyse, Energiespeichern und Wasserstoffanwendungen vernetzt unterstützen. Insgesamt zeigt die Präsentation, dass die BAM eine zentrale Institution für die sichere Transformation hin zu einer Wasserstoffwirtschaft ist - mit exzellenter Infrastruktur, praxisnahen Reallaboren und tiefgreifender Forschungskompetenz. T2 - Wasserstofftour durch die Regionen 2026 CY - Cottbus, Germany DA - 11.02.2026 KW - Reallabor KW - QI-Digital KW - Materialprüfung KW - Elektrolyse KW - Wertschöpfungskette KW - Testgelände PY - 2026 AN - OPUS4-65537 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Menga, D. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Wagner, F. A1 - Fellinger, Tim-Patrick T1 - Evaluation of the Specific Activity of MNCs and the Intrinsic Activity of Tetrapyrrolic FeN4 Sites for the Oxygen Reduction Reaction N2 - M−N−C electrocatalysts are considered pivotal to replace expensive precious group metal-based materials in electrocatalytic conversions. However, their development is hampered by the limited availability of methods for the evaluation of the intrinsic activity of different active sites, like pyrrolic FeN4 sites within Fe−N−Cs. Currently, new synthetic procedures based on active-site imprinting followed by an ion exchange reaction, e.g. Zn-to-Fe, are producing single-site M−N−Cs with outstanding activity. Based on the same replacement principle, we employed a conservative iron extraction to partially remove the Fe ions from the N4 cavities in Fe−N−Cs. Having catalysts with the same morphological properties and Fe ligation that differ solely in Fe content allows for the facile determination of the decrease in density of active sites and their turn-over frequency. In this way, insight into the specific activity of M−N−Cs is obtained and for single-site catalysts the intrinsic activity of the site is accessible. This new approach surpasses limitations of methods that rely on probe molecules and, together with those techniques, offers a novel tool to unfold the complexity of Fe−N−C catalyst and M−N−Cs in general. KW - Fe-N-C catalysts KW - M-N-C catalysts KW - Fuel Cells PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567406 DO - https://doi.org/10.1002/anie.202207089 SN - 1433-7851 VL - 61 IS - 50 SP - 1 EP - 6 PB - Wiley-VHC AN - OPUS4-56740 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -