TY - GEN A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg A1 - Adam, Christian T1 - RecArc - Verwertung von Rückständen aus der Metallurgie mit der Lichtbogentechnologie N2 - In dem Projekt soll die vollständige Wiederverwertbarkeit der Schlacke und ihrer Bestandteile demonstriert werden. Dazu gehören die vollständige Rückgewinnung der metallischen Phase, die in die Edelstahlherstellung zurückgeführt werden kann, sowie die Aufwertung der mineralischen Fraktion, die ihre uneingeschränkte Verwendung als Zementzumahlstoff oder mineralischer Baustoff erlaubt. Bei geeigneter Prozessführung des elektrischen Lichtbogenofens können durch „reduzierendes Schmelzen“ die chromhaltigen Wertstoffe zusammen mit anderen Schwermetallen zu 97% in einer Metalllegierung angereichert und separiert werden. Diese kann als Rohstoff in der Metallurgie eingesetzt werden. Der Chromgehalt der mineralischen Komponte der Schlacke konnte von ca. 3% auf unter 0,1% verringert werden. Die mineralische Fraktion lässt sich durch entsprechende Zuschläge während des Schmelzbetriebes und eine anschließende Granulation der schmelzflüssigen Phase zu einem Material aufwerten, das in seiner Zusammensetzung und seinen Eigenschaften typischen Zementkomponenten entspricht und als Rohstoff in der Zementproduktion eingesetzt werden kann. Dafür müssen allerdings noch die rechtlichen Voraussetzungen geschaffen werden, da der Rohstoffeinsatz gerade im Zement strengen Auflagen unterliegt und die Zemente bestimmte Normen erfüllen müssen. Durch die in RECARC aufgezeigte Möglichkeit der Wiederverwertung können somit Stoffkreisläufe geschlossen werden, die ansonsten zu einem Verlust wertvoller Rohstoffe führen. Vor allem die steigenden Rohstoffkosten, aber auch die immer stärker limitierten CO2-Emissionen zeigen die hohe Relevanz im Umgang mit metallurgischen Reststoffen. Eine Überführung des in RECARC demonstrierten Verfahrens in die Industrie könnte einen wichtigen Beitrag zur nachhaltigen Schonung der natürlichen Ressourcen und der Umwelt leisten. KW - Chrom KW - Lichtbogenofen KW - Recycling KW - Rückgewinnung KW - Schlacke PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-390197 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-39019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weimann, Karin A1 - Simon, Franz-Georg T1 - RESOLVED - Recovery of Solar Valuable Materials, Enrichment and Decontamination N2 - The use of renewable energy technologies, such as photovoltaics (PV) should be sustainable and environmentally compatible and therefore protect the environment from risks and damaging impacts. Regarding the growing number of installed photovoltaic systems, the end-of-life management of the pv-modules will become increasingly important. Thin film panels contain hazardous substances that may harm the environment if they are not recycled or disposed properly after reaching the end of their service life. Heavy metals, for example, can be toxic as well as carcinogenic or teratogenic. Processing methods for the recycling of PV thin film modules have to take these facts into account. Currently the available recycling techniques usually utilise chemicals such as acids for a wet-chemical treatment of end-of-life modules. The aim of RESOLVED was to identify and test alternative methods for a wet-mechanical treatment in order to reduce the consumption of chemicals in the recycling of thin film modules. Furthermore, the recovered Cadmium-Telluride (CdTe) and Copper-Indium-Diselenide/Disulfide (CIS) should be helping to save scare resources especially for limited elements such as tellurium and indium. The project RESOLVED investigated the recovery of semiconductors material as secondary raw material and the decontamination of the residues of the PV thin film modules. These goals were achieved by testing and optimising existing technologies for the recycling process as well as for the enrichment of the semiconductor materials. The target is to re-use the enriched recovered material in the production of new PV modules. Special efforts were made to look into life cycle analysis, process sustainability, economical aspects, and resource availability. KW - Renewable energy technologies KW - Photovoltaics KW - Hazardous substances KW - Recycling KW - Life cycle analysis KW - Process sustainability KW - Resources PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-390223 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-39022 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg T1 - PEREBAR - Long-Term Performance of Permeable Reactive Barriers Used for the Remediation of Contaminated Groundwater N2 - Contaminated land, landfills and sediments pose a serious environmental threat by polluting groundwater in the surrounding area. In 14 European countries contamination caused by uranium represents a particularly serious danger where drinking water resources might be affected. Other heavy metals and organic pollutants can also have a strongly deleterious effect on groundwater. Available technologies (e.g. pump- and-treat) fall short of solving the problem because their performance is not yet adequate for effective remediation. The aim of the project is to elaborate the scientific basis for laboratory and pilot-scale testing of and the practical application of a considerably more efficient and cost-effective in-situ reactive barrier technology targeting the above contaminants. The primary model test site will be an area in Southern Hungary contaminated by uranium mining- thus including a region which is due to become part of the European Union. The approach taken to meet the project objectives was the characterisation of different reactive materials and relevant attenuation processes in the reactive matrix of the permeable barrier with special respect to their long-term behaviour. The experimental work included laboratory experiments at different scales, going from bench-scale tests up to pilot-scale, and field-scale experiments. Experimental conditions were predetermined by the characteristics of the model site, such as geologic and hydrogeological settings, soil composition, and type, extent and spreading of the contamination. Technological methods to enhance the long-term efficacy and cost-effectiveness of permeable reactive barrier systems were developed and tested under realistic conditions. KW - Ground water pollution KW - Contaminated sites KW - Environmental pollution KW - Permeable reactive barrier systems PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-390231 UR - http://www.eugris.info/displayproject.asp?Projectid=4290 SP - 1 EP - 9 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-39023 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -