TY - CONF A1 - Wander, Lukas A1 - Kern, Simon A1 - Meyer, Klas A1 - Guhl, Svetlana A1 - Maiwald, Michael T1 - Assessment and validation of various flow cell designs for quantitative online NMR spectroscopy N2 - Compact nuclear magnetic resonance (NMR) instruments make NMR spectroscopy and relaxometry accessible in industrial and harsh environments for reaction and process control. Robust field integration of NMR systems have to face explosion protection or integration into process control systems with short set-up times. This paves the way for industrial automation in real process environments. The design of failsafe, temperature and pressure resistant flow through cells along with their NMR-specific requirements is an essential cornerstone to enter industrial production plants and fulfill explosion safety requirements. NMR-specific requirements aim at full quantitative pre-magnetization and acquisition with maximum sensitivity while reducing sample transfer times and dwell-times. All parameters are individually dependent on the applied NMR instrument. Luckily, an increasing number of applications are reported together with an increasing variety of commercial equipment. However, these contributions have to be reviewed thoroughly. The performance of sample flow cells commonly used in online analytics and especially for low-field NMR spectroscopy was experimentally and theoretically investigated by 1H-NMR experiments and numerical simulations. Here, we demonstrate and discuss an automated test method to determine the critical parameters of flow through cells for quantitative online NMR spectroscopy. The setup is based on randomized setpoints of flow rates in order to reduce temperature related effects. Five flow cells and tubings were assessed and compared for high-field as well as low-field NMR spectrometers. T2 - Small Molecule NMR Conference (SMASH) CY - Baveno, Italy DA - 17.09.2017 KW - Online NMR spectroscopy KW - Reaction monitoring KW - Flow cell KW - Process control KW - SMASH PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-419485 UR - http://www.smashnmr.org/conference/program AN - OPUS4-41948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wander, Lukas A1 - Kern, Simon A1 - Guhl, Svetlana A1 - Meyer, Klas A1 - Paul, Andrea A1 - Maiwald, Michael T1 - Reading Between the Lines – Automated Data Analysis for Low-Field NMR Spectra N2 - For reaction monitoring using NMR instruments, in particular, after acquisition of the FID the data needs to be corrected in real-time for common effects using automated methods. When it comes to NMR data evaluation under industrial process conditions, the shape of signals can change drastically due to nonlinear effects. However, the structural and quantitative information is still present but needs to be extracted by applying predictive models. Acquired raw spectra were processed with the following tools: · Phase correction using the Entropy minimization method · Baseline correction using a low-order Polynomial fit · Alignment (icoshift) Pure component models based on Pseudo-Voigt functions can be derived via peak fitting of measured pure components or by the use of spin calculations. T2 - Tackling the Future of Plant Operation - Jointly towards a Digital Process Industry CY - Barcelona, Spain DA - 13.12.2017 KW - Process Monitoring KW - Online NMR Spectroscopy KW - Indirect Hard Modeling KW - Spectral Modeling KW - Process Analytical Technology KW - CONSENS PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-434346 AN - OPUS4-43434 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wander, Lukas A1 - Kern, Simon A1 - Guhl, Svetlana A1 - Meyer, Klas A1 - Maiwald, Michael T1 - Keramikdurchflusszellen für das industrielle Reaktionsmonitoring mit Niederfeld-NMR-Spektroskopie N2 - Derzeit verfügbare Niederfeld-NMR-Spektrometer sind oft für Laborapplikationen konzipiert. Für den Einsatz im industriellen Prozessmonitoring müssen deshalb Anpassungen vorgenommen werden. Ein wichtiger Aspekt ist die Gestaltung der Messzelle. Sie muss über eine hohe thermische-, chemische und vor allem mechanische Beständigkeit verfügen. Hinzu kommt die Besonderheit des NMR-Experiments, das auf die Durchlässigkeit von Radiofrequenzen angewiesen ist. Keramik ist ein in der Hochfeld-NMR-Spektroskopie bewährtes Material das diese Eigenschaften vereint. Um im Prozessmonitoring die Interessen kleiner Bypass-Volumina, großer Durchflussgeschwindigkeit und großes Signal-zu-Rausch-Verhältnis mit der nötigen Vormagnetisierungszeit in Einklang zu bringen, ist eine im Messbereich aufgeweitete Zellgeometrie vorteilhaft. Die Fertigung einer Keramikmesszelle für die Niederfeld-NMR-Spektroskopie für Drücke bis 7 MPa mit dieser besonderen Geometrie wurde mit Hilfe eines modernen additiven Fertigungsverfahrens realisiert. Quantitative NMR-Messungen an konstant durch das Spektrometer strömenden Flüssigkeiten werden durch eine maximale Durchflussgeschwindigkeit limitiert. Diese wird von vielen Einflussgrößen bestimmt und sollte vor jeder quantitativen Messreihe experimentell für das individuelle System ermittelt werden. Zu diesem Zweck wurde eine automatisierte Laboranordnung konzipiert. Der Vergleich der neuen NMR-Keramikzelle mit bestehenden Messzellen u. a. anhand dieses Parameters untermauert ihre Eignung für das industrielle Prozessmonitoring. T2 - 13. Herbstkolloquium Arbeitskreis Prozessanalytik CY - Esslingen, Germany DA - 20.11.2017 KW - Keramikdurchflusszelle KW - Niederfeld-NMR KW - Online-NMR PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-430918 AN - OPUS4-43091 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -