TY - RPRT A1 - Frost, K. A1 - Lüth, Peter A1 - Schmidt, Martin A1 - Simon, K. A1 - Uhlig, St. T1 - Evaluation of the interlaboratory test 2015-2016 on the method DIN EN 15188:2007 "Determination of the spontaneous ignition behaviour of dust accumulations" N2 - For the classification, safe handling and use of the chemicals, special standardized testing procedures have been developed and are used worldwide. Safety experts must be able to fully rely on the precise execution of the respective laboratory tests and assessments. In this context, interlaboratory tests are a crucial element of a laboratory's quality system. Participation in interlaboratory tests is explicitly recommended by the standard ISO/IEC 17025. The present document reports the results of the interlaboratory test 2015-2016, which was performed on the test method DIN EN 15188:2007 “Determination of the spontaneous ignition behaviour of dust accumulations”. It was organized by BAM in the frame of the co-operation project CEQAT-DGHS Centre for Quality Assurance for Testing of Dangerous Goods and Hazardous Substances. The test method DIN EN 15188:2007 is applied to characterize the self-ignition behaviour of combustible dusts. The experimental basis for describing the self-ignition behaviour of a given dust is the determination of the self-ignition temperatures (TSI) of differently-sized volumes of the dust sample by isoperibolic hot storage experiments (storage at constant oven temperatures) in commercially available ovens. The results measured this way reflect the dependence of the self-ignition temperatures on the volume of a dust accumulation. The interlaboratory test 2015-2016 on the method DIN EN 15188:2007 is the latest in a systematic stepwise built up series of method validation interlaboratory tests and internal laboratory investigations. The aim of this interlaboratory test was to determine measurement uncertainties of the modified method DIN EN 15188 for different substances, covering a sufficiently wide range of self-ignition behaviours in the scope of the DIN EN 15188 of the four basket test to extrapolate to storage volumes up to 1000 m³ and the single basket test for a basket volume of 1000 cm³. The precision of the four basket test and the single basket of the modified method DIN EN 15188 can be assessed as acceptable for the four sample materials investigated in the current interlaboratory test 2015-2016. It was possible to derive a functional equation for the measurement uncertainty U depending on the storage volume V. The measurement uncertainty cannot be ignored and must be considered, if TSI results should be used in practice. KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung KW - Messunsicherheit KW - Dangerous goods KW - Hazardous substances KW - Round robin test KW - Interlaboratory comparison KW - Test method KW - Validation KW - Measurement uncertainty PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-387343 SN - 978-3-9818270-0-2 SP - 1 EP - 106 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38734 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Frost, K. A1 - Lüth, Peter A1 - Schmidt, Martin A1 - Simon, K. A1 - Uhlig, S. T1 - Interlaboratory test 2023 on the method DIN EN 15188:2021-07 "Determination of the spontaneous ignition behaviour of dust accumulations" - Final report of results N2 - The test method DIN EN 15188:2021-07 “Determination of the spontaneous ignition behaviour of dust accumulations” is applied to characterize the self-ignition behaviour of combustible dusts. The experimental basis for describing the self-ignition behaviour of a given dust is the determination of the self-ignition temperatures (TSI) of differently-sized volumes of the dust sample by isoperibolic hot storage experiments (storage at constant oven temperatures) in commercially available ovens. The results measured this way reflect the dependence of the self-ignition temperatures on the volume of a dust accumulation. Several internal investigations in the past (e.g. interlaboratory tests in 2010-2011 and 2015-2016) have shown significant differences between the lab-specific results of hot storage tests of the former version of the revised DIN EN 15188:2021-07 (DIN EN 15188:2007). Therefore, an improvement of the test method DIN EN 15188:2007 was necessary. After a rather long and extensive series of various improvements (methodological modifications), the interlaboratory test in 2015-2016 demonstrated an acceptable reliability of the test method and a satisfactory measurement uncertainty if the modifications described in the interlaboratory test are taken into account. On the basis of this interlaboratory test in 2015, this subsequently led to a revision of the standard, whereby, in addition to the methodological improvements, the measurement uncertainty to be taken into account could now also be specified for the first time in this standard. The revised DIN EN 15188:2021-07 was published in 2021 and can now be applied by laboratories. This report provides the laboratory results of the first interlaboratory test 2023 on the revised method DIN EN 15188:2021-07 and summarizes the results of the assessment of laboratory performance. KW - DIN EN 15188:2021-07 KW - Spontaneous ignition KW - Interlaboratory test KW - Round robin test KW - Proficiency test KW - Dangerous goods KW - Hazardous substances KW - Measurement uncertainty KW - Gefahrgut KW - Gefahrstoff KW - Qualitätssicherung KW - Ringversuch KW - Selbstentzündung KW - Staub KW - Dust PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614560 SN - 978-3-9818564-6-0 DO - https://doi.org/10.26272/opus4-61456 SP - 1 EP - 51 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin ET - 1. AN - OPUS4-61456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -