TY - JOUR
A1 - Schilling, Markus
A1 - Bayerlein, Bernd
A1 - von Hartrott, Philipp
A1 - Waitelonis, Jörg
A1 - Birkholz, Henk
A1 - Portella, Pedro Dolabella
A1 - Skrotzki, Birgit
T1 - FAIR and Structured Data: A Domain Ontology Aligned with Standard‐Compliant Tensile Testing
N2 - The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
KW - Data Interoperability
KW - Domain Ontology Development
KW - FAIR Data Management
KW - Knowledge Representation
KW - Tensile Test Ontology
KW - Semantic Web Technologies
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-598142
DO - https://doi.org/10.1002/adem.202400138
SN - 1438-1656
SP - 1
EP - 19
PB - Wiley VHC-Verlag
AN - OPUS4-59814
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Fardan, Ahmed
A1 - Fazi, Andrea
A1 - Peng, Ru Lin
A1 - Mishurova, Tatiana
A1 - Thuvander, Mattias
A1 - Bruno, Giovanni
A1 - Brodin, Håkan
A1 - Hryha, Eduard
T1 - Fine-Tuning Melt Pools and Microstructures: Taming Cracks in Powder Bed Fusion—Laser Beam of a non-weldable Ni-base Superalloy
N2 - Powder Bed Fusion – Laser Beam (PBF-LB) of high γ’ strengthened Ni-base superalloys, such as CM247LC, is of great interest for high temperature applications in gas turbines. However, PBF-LB of CM247LC is challenging due to the high cracking susceptibility during PBF-LB processing (solidification cracking) and heat treatment (strain age cracking, mostly caused by residual stresses). This study focuses on understanding the impact of process parameters on microstructure, residual stresses and solidification cracking. Laser power (P), speed (v) and hatch spacing (h) were varied while the layer thickness (t) was fixed. The melt pool size and shape were found to be key factors in minimizing solidification cracking. Narrower and shallower melt pools, achieved using a low line energy density (LED = P/v ≤ 0.1 J/mm), gave low crack densities (0.7 mm/mm2). A tight hatch spacing (h = 0.03 mm) resulted in reduced lack of fusion porosity. Electron backscatter diffraction investigations revealed that parameters giving finer microstructure with 〈100〉crystallographic texture had low crack densities provided they were processed with a low LED. Atom probe tomography elucidated early stages of spinodal decomposition in the as-built condition, where Cr and Al cluster separately. The extent of spinodal decomposition was found to be affected by the LED and the hatch spacing. Samples with low LED and small hatch spacing showed higher degrees of spinodal decomposition. X-ray diffraction residual stress investigations revealed that the residual stress is proportional to the volumetric energy density (VED = P/(v. h. t)). Although low residual stresses can be achieved by using low VED, there is a high risk of lack of fusion. Hence, other parameters such as modified scan strategy, build plate pre-heating and pulsed laser mode, must be further explored to minimize the residual stresses to reduce the strain age cracking susceptibility.
KW - Additive manufacturing
KW - X-ray CT
KW - Non-weldable superalloy
KW - Solidification cracking
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-597340
DO - https://doi.org/10.1016/j.mtla.2024.102059
SN - 2589-1529
VL - 34
IS - 102059
SP - 1
EP - 16
PB - Elsevier B.V.
AN - OPUS4-59734
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hoffmann, Moritz
A1 - Stawarczyk, Bogna
A1 - Günster, Jens
A1 - Zocca, Andrea
T1 - Influence of additives and binder on the physical properties of dental silicate glass-ceramic feedstock for additive manufacturing
N2 - Objectives
The aim of the study was to investigate the impact of organic additives (binder, plasticizer, and the cross-linking ink) in the formulation of water-based feedstocks on the properties of a dental feldspathic glass-ceramic material developed for the slurry-based additive manufacturing technology “LSD-print.”
Material and methods
Three water-based feldspathic feedstocks were produced to study the effects of polyvinyl alcohol (AC1) and poly (sodium 4-styrenesulfonate) (AC2) as binder systems. A feedstock without organic additives was tested as the control group (CG). Disc-shaped (n = 15) and bar (n = 7) specimens were slip-cast and characterized in the green and fired states. In the green state, density and flexural strength were measured. In the fired state, density, shrinkage, flexural strength (FS), Weibull modulus, fracture toughness (KIC), Martens parameters, and microstructure were analyzed. Disc-shaped and bar specimens were also cut from commercially available CAD/CAM blocks and used as a target reference (TR) for the fired state.
Results
In the green state, CG showed the highest bulk density but the lowest FS, while the highest FS in the green state was achieved with the addition of a cross-linking ink. After firing, no significant differences in density and a similar microstructure were observed for all slip-cast groups, indicating that almost complete densification could be achieved. The CAD/CAM specimens showed the highest mean FS, Weibull modulus, and KIC, with significant differences between some of the slip-cast groups.
Significance
These results suggest that the investigated feedstocks are promising candidates for the slurry-based additive manufacturing of restorations meeting the class 1a requirements according to DIN EN ISO 6871:2019–01.
KW - Firing
KW - 3D-printing
KW - Silicate glass-ceramics
KW - Debinding
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600516
DO - https://doi.org/10.1016/j.jmbbm.2024.106563
SN - 1751-6161
VL - 155
SP - 1
EP - 12
PB - Elsevier B.V.
AN - OPUS4-60051
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Fareed, Adnan
A1 - Rosalie, Julian M.
A1 - Kar, Satyakam
A1 - Fähler, Sebastian
A1 - Maaß, Robert
T1 - Small-scale functional fatigue of a Ni-Mn-Ga Heusler alloy
N2 - Functional fatigue of shape-memory alloys is a considerable threat to the reliable service of actuation devices. Here, we demonstrate the essentially degradation-free cyclic phase-transformation behavior of Ni-Mn-Ga microcrystals up to one million stress-driven superelastic cycles. Cyclic dissipation amounts to about 1/5 of the bulk counterpart and remains unaffected during cycling, even after the introduction of dislocation structures via plastic straining. Plastic yielding and the transformation stress largely exceed the known bulk values. However, the transformation-stress is found to depend on plastic pre-straining, which suggests that the size-affected transformation stress is sensitive to the initial defect structure and that it can be tuned by a targeted introduction of dislocations. These findings demonstrate the high suitability of Ni-Mn-Ga as a robust shape-memory alloy in small-scale functional device engineering.
KW - Superelasticity
KW - Shape-memory alloys
KW - Functional fatigue
KW - Ni-Mn-Ga
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600695
DO - https://doi.org/10.1016/j.actamat.2024.119988
VL - 274
SP - 1
EP - 10
PB - Elsevier B.V.
AN - OPUS4-60069
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - You, Yi
A1 - Danischewski, Julia
A1 - Molnar, Brian
A1 - Riedel, Jens
A1 - Shelley, Jacob
T1 - Manipulation of Gaseous Ions with Acoustic Fields at Atmospheric Pressure
N2 - The ability to controllably move gaseous ions is an essential aspect of ion-based spectrometry (e.g., mass spectrometry and ion mobility spectrometry) as well as materials processing. At higher pressures, ion motion is largely governed by diffusion and multiple collisions with neutral gas molecules. Thus, high-pressure ion optics based on electrostatics require large fields, radio frequency drives, complicated geometries, and/or partially transmissive grids that become contaminated. Here, we demonstrate that low-power standing acoustic waves can be used to guide, block, focus, and separate beams of ions akin to electrostatic ion optics. Ions preferentially travel through the static-pressure regions (“nodes”) while neutral gas does not appear to be impacted by the acoustic field structure and continues along a straight trajectory. This acoustic ion manipulation (AIM) approach has broad implications for ion manipulation techniques at high pressure, while expanding our fundamental understanding of the behavior of ions in gases.
KW - Ion mobility spectrometry
KW - Acoustic
KW - Mass spectrometry
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600704
DO - https://doi.org/10.1021/jacs.4c01224
SP - 1
EP - 6
PB - ACS Publications
AN - OPUS4-60070
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Maulas, Kryzzyl M.
A1 - Paredes, Charla S.
A1 - Tabelin, Carlito Baltazar
A1 - Jose, Mark Anthony
A1 - Opiso, Einstine M.
A1 - Arima, Takahiko
A1 - Park, Ilhwan
A1 - Mufalo, Walubita
A1 - Ito, Mayumi
A1 - Igarashi, Toshifumi
A1 - Phengsaart, Theerayut
A1 - Villas, Edrhea
A1 - Dagondon, Sheila L.
A1 - Metillo, Ephrime B.
A1 - Uy, Mylene M.
A1 - Manua, Al James A.
A1 - Villacorte-Tabelin, Mylah
T1 - Isolation and Characterization of Indigenous Ureolytic Bacteria from Mindanao, Philippines: Prospects for Microbially Induced Carbonate Precipitation (MICP)
N2 - Microbially induced carbonate precipitation (MICP), a widespread phenomenon in nature, is gaining attention as a low-carbon alternative to ordinary Portland cement (OPC) in geotechnical engineering and the construction industry for sustainable development. In the Philippines, however, very few works have been conducted to isolate and identify indigenous, urease-producing (ureolytic) bacteria suitable for MICP. In this study, we isolated seven, ureolytic and potentially useful bacteria for MICP from marine sediments in Iligan City. DNA barcoding using 16s rDNA identified six of them as Pseudomonas stutzeri, Pseudomonas pseudoalcaligenes, Bacillus paralicheniformis, Bacillus altitudinis, Bacillus aryabhattai, and Stutzerimonas stutzeri but the seventh was not identified since it was a bacterial consortium. Bio-cementation assay experiments showed negligible precipitation in the control (without bacteria) at pH 7, 8, and 9. However, precipitates were formed in all seven bacterial isolates, especially between pH 7 and 8 (0.7–4 g). Among the six identified bacterial species, more extensive precipitation (2.3–4 g) and higher final pH were observed in S. stutzeri, and B. aryabhattai, which indicate better urease production and decomposition, higher CO2 generation, and more favorable CaCO3 formation. Characterization of the precipitates by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) and attenuated total reflectance Fourier transform spectroscopy (ATR-FTIR) confirmed the formation of three carbonate minerals: calcite, aragonite, and vaterite. Based on these results, all six identified indigenous, ureolytic bacterial species from Iligan City are suitable for MICP provided that the pH is controlled between 7 and 8. To the best of our knowledge, this is the first report of the urease-producing ability and potential for MICP of P. stutzeri, P. pseudoalcaligenes, S. stutzeri, and B. aryabhattai.
KW - Calcium carbonate
KW - Microbially induced carbonate precipitation (MICP)
KW - Ureolytic bacteria
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600888
DO - https://doi.org/10.3390/min14040339
VL - 14
IS - 4
SP - 1
EP - 15
PB - MDPI
AN - OPUS4-60088
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hartwig, Philipp
A1 - Bakir, Nasim
A1 - Gumenyuk, Andrey
A1 - Scheunemann, Lisa
A1 - Schröder, Jörg
A1 - Rethmeier, Michael
T1 - A Physically Motivated Heat Source Model for Laser Beam Welding
N2 - In this contribution, we present a physically motivated heat source model for the numerical modeling of laser beam welding processes. Since the calibration of existing heat source models, such as the conic or Goldak model, is difficult, the representation of the heat source using so-called Lamé curves has been established, relying on prior Computational Fluid Dynamics (CFD) simulations.
Lamé curves, which describe the melting isotherm, are used in a subsequent finite-element (FE) simulation to define a moving Dirichlet boundary condition, which prescribes a constant temperature in the melt pool. As an alternative to this approach, we developed a physically motivated heat source model, which prescribes the heat input as a body load directly. The new model also relies on prior CFD simulations to identify the melting isotherm. We demonstrate numerical results of the new heat source model on boundary-value problems from the field of laser beam welding and compare it with the prior CFD simulation and the results of the Lamé curve model and experimental data.
KW - Welding simulation
KW - Heat source models
KW - Laser beam welding
KW - Thermal analysis
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600899
DO - https://doi.org/10.3390/met14040430
VL - 14
IS - 4
SP - 1
EP - 26
PB - MDPI
CY - Basel
AN - OPUS4-60089
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Schlögl, Johanna
A1 - Goldammer, Ole
A1 - Bader, Julia
A1 - Emmerling, Franziska
A1 - Riedel, Sebastian
T1 - Introducing AFS ([Al(SO3F)3]x) – a thermally stable, readily available, and catalytically active solid Lewis superacid
N2 - This paper introduces the thermally stable, solid Lewis superacid aluminium tris(fluorosulfate) (AFS), that is easy-to-synthesize from commercially available starting materials. Its applicability, e.g. in catalytic C–F bond activations, is shown.
KW - Lewis Acid
KW - C-F activation
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601001
DO - https://doi.org/10.1039/D4SC01753F
SN - 2041-6520
SP - 1
EP - 7
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-60100
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Fiedler, Saskia
A1 - Frenzel, Florian
A1 - Würth, Christian
A1 - Tavernaro, Isabella
A1 - Grüne, M.
A1 - Schweizer, S.
A1 - Engel, A.
A1 - Resch-Genger, Ute
T1 - Interlaboratory Comparison on Absolute Photoluminescence Quantum Yield Measurements of Solid Light Converting Phosphors with Three Commercial Integrating Sphere Setups
N2 - Scattering luminescent materials dispersed in liquid and solid matrices and luminescent powders are increasingly relevant for fundamental research and industry. Examples are luminescent nano- and microparticles and phosphors of different compositions in various matrices or incorporated into ceramics with applications in energy conversion, solid-state lighting, medical diagnostics, and security barcoding. The key parameter to characterize the performance of these materials is the photoluminescence/fluorescence quantum yield (Φf), i.e., the number of emitted photons per number of absorbed photons. To identify and quantify the sources of uncertainty of absolute measurements of Φf of scattering samples, the first interlaboratory comparison (ILC) of three laboratories from academia and industry was performed by following identical measurement protocols. Thereby, two types ofcommercial stand-alone integrating sphere setups with different illumination and detection geometries were utilized for measuring the Φf of transparent and scattering dye solutions and solid phosphors, namely, YAG:Ce optoceramics of varying surface roughness, used as converter materials for blue light emitting diodes. Special emphasis was dedicated to the influence of the measurement geometry, the optical properties of the blank utilized to determine the number of photons of the incident excitation light absorbed by the sample, and the sample-specific surface roughness. While the Φf values of the liquid samples matched between instruments, Φf measurements of the optoceramics with different blanks revealed substantial differences. The ILC results underline the importance of the measurement geometry, sample position, and blank for reliable Φf data of scattering the YAG:Ce optoceramics, with the blank’s optical properties accounting for uncertainties exceeding 20%.
KW - Nano
KW - Fluorescence
KW - Reference material
KW - Luminescence
KW - Quantitative spectroscopy
KW - Particle
KW - Quantum yield
KW - Quality assurance
KW - Phosphor
KW - Converter material
KW - Lifetime
KW - Interlaboratory comparison
KW - Method
KW - Uncertainty
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600945
DO - https://doi.org/10.1021/acs.analchem.4c00372
SN - 0003-2700
SP - 6730
EP - 6737
PB - ACS Publications
AN - OPUS4-60094
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Camplese, Davide
A1 - Scarponi, Giordano Emrys
A1 - Chianese, Carmela
A1 - Hajhariri, Aliasghar
A1 - Eberwein, Robert
A1 - Otremba, Frank
A1 - Cozzani, Valerio
T1 - Modeling the performance of multilayer insulation in cryogenic tanks undergoing external fire scenarios
N2 - Multilayer Insulation (MLI) is frequently used in vacuum conditions for the thermal insulation of cryogenic storage tanks. The severe consequences of the degradation of such materials in engulfing fire scenarios were recently evidenced by several large-scale experimental tests. In the present study, an innovative modelling approach was developed to assess the performance of heat transfer in polyester-based MLI materials for cryogenic applications under fire conditions. A specific layer-by-layer approach was integrated with an apparent kinetic thermal degradation model based on thermogravimetric analysis results. The modeling results provided a realistic simulation of the experimental data obtained by High-Temperature Thermal Vacuum Chamber tests reproducing fire exposure conditions. The model was then applied to assess the behavior of MLI systems for liquid hydrogen tanks in realistic fire scenarios. The results show that in intense fire scenarios degradation occurs rapidly, compromising the thermal insulation performances of the system within a few minutes.
KW - Multilayer Insulation
KW - Cryogenic Vessels
KW - Liquefied Hydrogen
KW - Liquefied Natural Gas
KW - Safety
KW - Fire
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599418
DO - https://doi.org/10.1016/j.psep.2024.04.061
SN - 0957-5820
VL - 186
SP - 1169
EP - 1182
PB - Elsevier B.V.
AN - OPUS4-59941
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -