TY - JOUR
A1 - Nicolai, Marcel
A1 - Bulling, Jannis
A1 - Narayanan, M.M.
A1 - Zeipert, Henning
A1 - Prager, Jens
A1 - Henning, Bernd
T1 - Dynamic interface behavior in coupled plates: Investigating Lamb wave mode repulsion with a spring-based model
N2 - This study investigates the phenomenon of mode repulsion in Lamb waves propagating through two coupled plates with an elastic interface. Using a spring-based coupling model and the Scaled Boundary Finite Element Method, the dispersion curves of the coupled system are analyzed under various interface conditions—weak coupling, sliding boundary, and perfect coupling. This research highlights how the mechanical stiffness of the interface influences the separation of modes and the emergence of repulsion regions. A novel focus on interface displacements reveals a unique dynamic behavior within the repulsion regions, driven by in-phase and out-of-phase oscillations of the coupled plates. The findings provide a physically grounded explanation of mode repulsion, linking it to the strain patterns in the interface. This insight lays the theoretical groundwork for future applications in material characterization and non-destructive evaluation, enabling more precise selection of Lamb wave modes for scientific and industrial purposes.
KW - Lamb waves
KW - Mode repulsion
KW - Coupled plates
KW - Elastic interface
KW - Dispersion curves
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-642245
DO - https://doi.org/10.1016/j.ultras.2025.107799
SN - 0041-624X
VL - 158
SP - 1
EP - 9
PB - Elsevier BV
AN - OPUS4-64224
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - You, Yi
A1 - Xue, Boyang
A1 - Riedel, Jens
T1 - Enhancement of LIBS plasma in air with organic solvent vapors
N2 - Laser-induced breakdown spectroscopy (LIBS) offers versatile, field-deployable elemental analysis; however, compact, high-repetition-rate nanosecond laser systems typically face constraints in power consumption and size, often compromising emission intensity and thus analytical performance. We demonstrate a significant improvement in LIBS signals through the controlled introduction of common organic solvent vapors into a sheath gas, with a diode-pumped solid-state laser (1064 nm, 2–28 kHz repetition rate, 450–600-μJ pulse energy). Optical and acoustic diagnostics reveal up to ca. 40-fold enhancement of the N II emission line at 567 nm when ambient air serves as the analyte. Maximal enhancement occurs at intermediate repetition rates of ca. 15 kHz, particularly at pulse energies approaching the optical breakdown threshold; this observation suggests a viable strategy for operating LIBS at lower pulse energies and higher repetition rates. Enhancement effects scale jointly with both vapor pressure and ionization energy of the organic species, with acetone and toluene markedly outperforming methanol and isopropanol. These findings provide a rational foundation for significantly improving the analytical performance of portable LIBS instruments without exceeding platform-specific constraints.
KW - LIBS
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653758
DO - https://doi.org/10.1016/j.sab.2025.107309
SN - 0584-8547
VL - 236
SP - 1
EP - 6
PB - Elsevier B.V.
AN - OPUS4-65375
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Holzer, Marco
A1 - Johansen, Sidsel M.
A1 - Christensen, Johan F.S.
A1 - Smedskjaer, Morten M.
A1 - Cicconi, Maria Rita
A1 - de Ligny, Dominique
A1 - Müller, Ralf
A1 - de Camargo, Andrea S.S.
A1 - Maaß, Robert
T1 - Direct connection between secondary relaxation mode and fracture toughness in alkali-aluminosilicate glasses
N2 - Oxide glasses are intrinsically brittle, lacking sufficient atomic-scale mechanisms that can relax mechanical stresses in the vicinity of a propagating crack. As a result, fracture is typically well-captured by considering local bond rupture at the crack tip. Here we demonstrate that barrier energies related to the low-temperature 𝛾-relaxation mode in alkali-aluminosilicate glasses are inversely related to the fracture toughness measured via standardized three-point bending fracture experiments. This holds true for both a series with varying cations (Li, Na, K) and one with varying Li concentration. The structural rationale for this finding is gained via Raman spectroscopy. The findings suggest that a fundamental structural relaxation mode measured on bulk specimens can serve as an effective guideline for fracture toughness of oxide glasses. Data for additional silicate glasses support this conclusion.
KW - Fracture toughness
KW - Oxide glass
KW - Mechanical properties
KW - Alkali-aluminosilicate glasses
KW - Internal friction
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-651540
DO - https://doi.org/10.1016/j.mtadv.2025.100669
SN - 2590-0498
VL - 29
SP - 1
EP - 10
PB - Elsevier Ltd.
CY - Amsterdam, Niederlande
AN - OPUS4-65154
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Fischer, Tim
A1 - Huber, Norbert
T1 - Microstructure and orientation effects on microcompression-induced plasticity in nanoporous gold
N2 - Understanding the plastic deformation of nanoporous metals requires a detailed examination of their small-scale microstructural features. In this work, we present a computational study of micropillar compression in single crystal nanoporous gold (NPG) using crystal plasticity. This approach enables a systematic investigation of three key microstructural effects, including ligament size (50 ≤ 𝑙 ≤ 400 nm), solid fraction (0.2 ≤ 𝜑 ≤ 0.3), and initial crystal orientation ([001] and [111] ̄ ), on the plastic response far beyond yielding. After validation against experimental data, the study reveals that, in line with the ’smaller is stronger’ trend, besides the yield strength, the strain hardening rate also increases as ligament size decreases. Moreover, the strain hardening rate follows a power-law scaling with solid fraction, similar to the yield strength. The analysis of two distinct crystal orientations presents findings contrasting with previous assumptions. While the yielding onset remains orientation-independent, as expected, an increase in the strain hardening rate emerges for the harder [11-1] orientation with continued compression. An effect that becomes more pronounced with increasing solid fraction and decreasing ligament size. Under these conditions, harder orientations also amplify local stress heterogeneity. Notably, the stress distribution in NPG is nearly twice as wide as that observed in the single crystal bulk material (𝜑 = 1.0). Compared to the crystal plasticity approach, traditional isotropic plasticity predicts more uniform local stress fields.
KW - Nanoporous gold
KW - Microcompression
KW - Plasticity
KW - Size effect
KW - Micromechanics
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650137
DO - https://doi.org/10.1016/j.actamat.2025.121798
SN - 1359-6454
VL - 304
SP - 1
EP - 13
PB - Elsevier Inc.
AN - OPUS4-65013
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Durlo Tambara, Luís Urbano
A1 - Nikoonasab, Ali
A1 - Radtke, Martin
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Gluth, Gregor
T1 - Determination of the oxidation depths of ground granulated blast furnace slag-containing cement pastes using Mn K-edge X-ray absorption near-edge structure spectroscopy
N2 - The redox potential of the pore solution of hardened cements containing ground granulated blast furnace slag (GGBFS) affects reinforcement corrosion and immobilization of radioactive waste. Here, Mn K-edge X-ray absorption near-edge structure (XANES) spectroscopy was applied to determine the depth profile of the oxidation state of manganese in hardened GGBFS-containing cement pastes. Manganese was oxidized in the outer regions of some of the pastes, but the depth to which this occurred was not identical with the ‘blue-green/white color change front’, usually interpreted as indicating oxidation of sulfur species. For CEM III/B, the color change of the material was gradual and thus unsuitable for a precise determination of the oxidation depth, while for the alkali-activated slag, a distinct color change front was found, but full oxidation of manganese and sulfur had not occurred in the brighter region. Mn K-edge XANES spectroscopy is thus a more reliable method than the determination of the visual color change front to follow the ingress of the oxidation front.
KW - Manganese
KW - Oxidation
KW - Sulfide
KW - Alkali-activated materials
KW - Redox conditions
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-651469
DO - https://doi.org/10.1111/jace.70445
SN - 0002-7820
SN - 1551-2916
VL - 109
IS - 1
SP - 1
EP - 11
PB - Wiley
CY - Oxford
AN - OPUS4-65146
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Campari, Alessandro
A1 - Konert, Florian
A1 - Razavi, Nima
A1 - Sobol, Oded
A1 - Alvaro, Antonio
T1 - Hydrogen-assisted cracking: A deep learning approach for fractographic analysis
N2 - Hydrogen handling equipment suffers from interaction with their operating environment, which degrades the mechanical properties and compromises component integrity. Hydrogen-assisted cracking is responsible for several industrial failures with potentially severe consequences. A thorough failure analysis can determine the failure mechanism, locate its origin, and identify possible root causes to avoid similar events in the future. Postmortem fractographic analysis can classify the fracture mode and determine whether the hydrogen-metal interaction contributed to the component’s breakdown. Experts in fracture classification identify characteristic marks and textural features by visual inspection to determine the failure mechanism. Although widely adopted, this process is time-consuming and influenced by subjective judgment and individual expertise. This study aims to automate fractographic analysis through advanced computer vision techniques. Different materials were tested in hydrogen atmospheres and inert environments, and their fracture surfaces were analyzed by scanning electron microscopy to create an extensive image dataset. A pre-trained Convolutional Neural Network was finetuned to accurately classify brittle and ductile fractures. In addition, Grad-CAM interpretability method was adopted to identify the image regions most influential in the model’s prediction and compare the saliency maps with expert annotations. This approach offered a reliable data-driven alternative to conventional fractographic analysis.
KW - Failure analysis
KW - Fractographic analysis
KW - Hydrogen embrittlement
KW - Material compatibility
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-646610
DO - https://doi.org/10.1016/j.commatsci.2025.114366
SN - 0927-0256
VL - 262
SP - 1
EP - 16
PB - Elsevier Science
CY - Amsterdam [u.a.]
AN - OPUS4-64661
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tóth, Péter
A1 - Hofmann‐Böllinghaus, Anja
A1 - Dumont, Fabien
A1 - Anderson, Johan
A1 - Sjöström, Johan
A1 - Bergius, Mikael
A1 - Chiva, Roman
A1 - Lalu, Octavian
T1 - Finalisation of the European Approach to Assess the Fire Performance of Facades—Brief Information on the Outcome of the Project
N2 - This research was conducted within the framework of project SI2.825082, funded by the European Commission—DG GROW. The project's objective was to finalise a European approach for assessing the fire performance of façades under medium and large fire exposure conditions. The national standards BS 8414‐1:2020/BS 8414‐2:2020 and DIN 4102‐20:2017 served as the foundation for developing the new assessment method. As part of the project, a theoretical round robin, initial testing activities and a large‐scale experimental round robin were carried out. The theoretical round robin aimed to examine how different laboratories interpreted the preliminary assessment method. Subsequently, the initial testing phase explored the design of the fire source, combustion chamber and secondary opening. The experimental round robin involved testing four façade systems across three laboratories using the assessment method documents, resulting in 12 tests for medium‐scale and 12 for large‐scale exposure—24 tests in total. These tests provided data to develop a calibration scheme and define appropriate performance criteria for classification. In this paper, the representatives of the project consortium summarise the research process and outline the proposed testing and evaluation methodology, which is intended to form the foundation of a future European testing standard for façades. The article also highlights the need for further research to establish rules for extended application of test results.
KW - Facade
KW - Testing
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654731
DO - https://doi.org/10.1002/fam.70042
SN - 0308-0501
SP - 1
EP - 27
PB - John Wiley & Sons Ltd.
AN - OPUS4-65473
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sobczak, M.
A1 - Lecompagnon, Julien
A1 - Hirsch, Philipp Daniel
A1 - Pieczonka, Ł.
A1 - Ziegler, Mathias
T1 - Impact damage characterization on CFRP parts using laser line scanning active thermography
N2 - This study presents a dual-path data processing framework for the detection and characterization of barely visible impact damage (BVID) in carbon-fiber-reinforced polymer (CFRP) structures using laser line thermography (LLT). A robotic LLT system was used to scan impacted CFRP specimens, and the resulting thermal sequences were analyzed using two complementary methods: full thermogram reconstruction followed by Pulse Phase Thermography (PPT) to detect subsurface delaminations, and Time-Summed Gradient Filtering (TSGF) to enhance surface-breaking cracks. Both processing paths produced interpretable results that were fused into a unified combined image and overlay mask, enabling simultaneous visualization of different defect types from a single scan. Quantitative analysis was performed on the binary masks to extract defect dimensions and Signal-to-noise ratio (SNR) values. The results demonstrated that delaminations and multiple cracks could be accurately detected and spatially distinguished, with good agreement to reference methods such as flash thermography and vibrothermography. This work highlights the potential of LLT as a versatile and scalable inspection technique, where multimodal defect detection and segmentation can be achieved through targeted processing and data fusion strategies.
KW - Active thermography
KW - CFRP
KW - Laser line scanning
KW - Delamination
KW - Cracks
KW - BVID
KW - NDT
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654097
DO - https://doi.org/10.1016/j.compositesb.2026.113425
SN - 1359-8368
VL - 313
SP - 1
EP - 9
PB - Elsevier Ltd.
AN - OPUS4-65409
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Schröder, Nina
A1 - Uhlig, Marvin
A1 - Kromm, Arne
A1 - Schröpfer, Dirk
A1 - Höfer, Kevin
A1 - Hensel, Jonas
A1 - Kannengießer, Thomas
T1 - Challenges in the evaluation of the weldability of old mild steels for future use
N2 - For reasons of sustainability and cost efficiency, there is an increasing trend in the steel-processing industry to retrofit existing structures, avoiding costly shutdowns or dismantling. Although welding is a cost-effective joining method, it is rarely applied to old steels, whereas riveted or bolted connections are often uneconomical. Repair and refurbishment frequently require the replacement of damaged material or the creation of dissimilar old–new steel joints. Due to the varied manufacturing processes of historical steels, not all twentieth-century steels are inherently weldable, making an initial assessment of weldability
essential. In this study, a historical non-deoxidized mild steel (produced by Siemens–Martin processing) originating from the construction of the Berlin Radio Tower (erected in 1926) was investigated using dilatometry to analyze its welding behavior. A database of welding CCT diagrams and HAZ simulations was established to support practice-oriented welding experiments, providing key insights into their weld-metallurgical behavior and weldability. Furthermore, initial welding trials were conducted, and the local residual stress states in dissimilar old–new steel joints were determined. These foundational investigations are critical for the development of innovative, load-adapted welding concepts for the repair and refurbishment of existing old-steel infrastructure in Germany.
KW - Old mild steels
KW - Repair welding
KW - Weldability
KW - Thermo-physical simulation
KW - CCT diagrams
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654784
DO - https://doi.org/10.1007/s40194-026-02366-6
SN - 1878-6669
SP - 1
EP - 14
PB - Springer nature
AN - OPUS4-65478
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - George, Janine
A1 - Ouellet-Plamondon, Claudiane
A1 - Reyes, Kristofer
T1 - Introduction to the “Accelerate Conference 2023–2024” themed collection
N2 - The collection showcases the ways in which automation, machine learning and robotics are transforming experimental materials science and chemistry into continuous, computationally integrated processes. It features innovations regarding autonomous laboratories, Bayesian optimisation, high-throughput experimentation and computation, and AI-driven literature extraction, which simplify and scale up materials discovery. Together, these works outline a modular, responsible framework for accelerating scientific progress through human-guided, data-driven autonomy.
KW - Automation
KW - Materials Acceleration Platforms
KW - Synthesizability
KW - Workflows
KW - Large Language Models
KW - Ontologies
KW - Materials Discovery
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654658
DO - https://doi.org/10.1039/d5dd90057c
SN - 2635-098X
SP - 1
EP - 2
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-65465
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Spitzer, Stefan
A1 - Amyotte, P.
A1 - Salzano, E.
T1 - Explosion behavior of hybrid mixtures
N2 - Flammable mixtures of dusts with gases or liquids occur in the process and energy industries. Most research about these so-called "hybrid mixtures" was, and still is, about coal dust with the admixture of methane because of their occurrence in the mining industry. In the modern industry, hybrid mixture explosions play an increasing role in many existing processes like spray-drying, or in emerging technologies like the direct reduction of iron ore with hydrogen or nuclear/fusion reactors. While some safety characteristics of one of the component substances stay the same or are unaffected by the concentrations that occur in the process, others are severely influenced by only traces of the other substance.
This review paper shows in which processes and applications hybrid mixtures pose a risk and gives an overview of the research conducted in the last 150 years. Findings that are reproducible and represent current proven knowledge are stated and compared to each safety characteristic containing only solid particles, gases or liquids as combustible substances. Additionally, fundamental studies on the mechanisms of flame propagation in hybrid mixtures are reviewed. The significance of these studies in enhancing our understanding of explosion behaviors in hybrid mixtures is also discussed. An outlook on what has been missing so far in the literature, is also given comparing the knowledge of single substances with their mixtures, why this might not have been investigated, and where the challenges lie.
KW - Hybrid mixtures
KW - Safety characteristics
KW - Combustion regimes
KW - Industrial explosions
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654013
DO - https://doi.org/10.1016/j.pecs.2025.101276
SN - 0360-1285
VL - 113
SP - 1
EP - 24
PB - Elsevier
CY - Amsterdam
AN - OPUS4-65401
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rodriguez, Santiago
A1 - Kumanski, Sylvain
A1 - Ayed, Zeineb
A1 - Fournet, Aurélie
A1 - Bouanchaud, Charlène
A1 - Sagar, Amin
A1 - Allemand, Frédéric
A1 - Baulin, Vladimir A.
A1 - Resch‐Genger, Ute
A1 - Cortés, Juan
A1 - Sibille, Nathalie
A1 - Chirot, Fabien
A1 - Wegner, Karl David
A1 - Antoine, Rodolphe
A1 - Le Guével, Xavier
A1 - Bernadó, Pau
T1 - Programming the Optoelectronic Properties of Atomically Precise Gold Nanoclusters Using the Conformational Landscape of Intrinsically Disordered Proteins
N2 - The rational design of hybrid nanomaterials with precisely controlled properties remains a central challenge in materials science. While atomically precise gold nanoclusters (Au‐NCs) offer molecule‐like control over a metallic core, tuning their optoelectronic behavior via surface engineering is often empirically driven. Here, we establish a design principle by demonstrating that the conformational landscape of intrinsically disordered proteins (IDP) can be used as a programmable scaffold to rationally modulate the photophysical properties of a covalently bound Au‐NC. We synthesized a series of bioconjugates between Au 25 nanoclusters and bioengineered IDPs containing a variable number of cysteine anchoring points. A combination of mass spectrometry, small‐angle X‐ray scattering, and modeling on the conjugates indicates that increasing the number of covalent anchors systematically restricts the conformational ensemble, inducing a progressively more compact protein shell around nanoclusters. This structural rigidification at the interface directly translates into a 15‐fold enhancement of the Au‐NC near‐infrared photoluminescence and a six‐fold increase in its average lifetime. Our findings demonstrate that the conformational plasticity of IDPs and the capacity to engineer them can be harnessed as a molecular tuning knob, moving to a new regime of programmable soft‐matter control over the properties of quantum‐confined nanomaterials for tailored biotechnological applications.
KW - Fluorescence
KW - Custer
KW - Nano
KW - Advanced material
KW - Characterization
KW - Fluorescence quantum yield
KW - Integrating sphere spectroscopy
KW - Thiol ligands
KW - Gold
KW - Surface chemistry
KW - SWIR
KW - Mass spectrometry
KW - Protein
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655086
DO - https://doi.org/10.1002/chem.202502991
SN - 0947-6539
SP - 1
EP - 9
PB - Wiley VHC-Verlag
AN - OPUS4-65508
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gladrow, K.
A1 - Unkovskiy, A.
A1 - Yassine, J.
A1 - Gaertner, N.
A1 - Topolniak, Ievgeniia
A1 - Henning, N.
A1 - Schmidt, F.
T1 - The effect of nitrogen atmosphere during post-curing on cytotoxicity, polishability, flexural strength, and surface hardness of 3D-printed denture bases: an in vitro study
N2 - 3D printing is increasingly utilized in dentistry. Compared to traditional manufacturing methods, 3D printing provides advantages such as faster production times and the ability to create complex structures. Although biocompatible materials are available, many are only suitable for temporary applications. This study examines the impact of nitrogen-aided post-processing on the mechanical properties and cytotoxicity of 3D-printed denture bases, with the hypothesis that this post-processing will enhance material properties and decrease cytotoxicity. Specimens were fabricated from V-print dentbase (Voco GmbH, Cuxhaven, Germany) and post-processed either in nitrogen or air. The specimens were categorized into aged and non-aged groups. For comparison, specimens made from milled material were utilized. Vickers hardness, flexural strength, polishability, cytotoxicity, and degree of conversion were then assessed for all groups. The data were analyzed using a one-way ANOVA and Tukey HSD test for multiple comparisons, with a significance threshold of p < 0.05. Post-curing with nitrogen improved the degree of conversion, surface hardness, and biocompatibility of 3D-printed dental materials, confirming reduced cytotoxicity without impairing mechanical properties. Nitrogen increased polymerization and decreased harmful monomers, making it ideal for clinical applications in contact with the oral mucosa. Optimizing post-processing steps, such as curing in nitrogen, enhances biocompatibility while maintaining strength and hardness, ensuring better patient care in dental applications.
KW - Biocompatibility
KW - V-Print
KW - Cytotoxicity
KW - Nitrogen
KW - Dentistry
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654504
DO - https://doi.org/10.1007/s10856-026-07006-5
SN - 1573-4838
VL - 37
IS - 1
SP - 1
EP - 13
PB - Springer Science and Business Media LLC
AN - OPUS4-65450
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hübner, Martin
A1 - Dittmann, Florian
A1 - Kromm, Arne
A1 - Varfolomeev, Igor
A1 - Kannengiesser, Thomas
T1 - Enhancement of the fatigue strength by application of a low transformation temperature (LTT) welding consumable
N2 - Low transformation temperature (LTT) welding consumables offer a possibility to enhance fatigue strength in welded components without post-treatment. By lowering the martensite start temperature (MS), the volume expansion during transformation near ambient temperature reduces welding related tensile residual stresses in fatigue-critical areas. To evaluate this effect, longitudinal stiffeners were used, a LTT and conventional filler serve as welding consumable, also high frequency mechanical impact (HFMI) treatment was carried out. Three single-pass and six additional-pass sample series were investigated on residual stress and fatigue strength. The additional welds were applied in fatigue crack critical areas with different weld shapes, achieved by varying welding parameters. Mechanical tests on reference samples evaluated the properties of the diluted LTT welds. Although reduced toughness was observed, no fatigue cracks occurred in LTT single-pass weld roots. The fatigue strength at two million cycles increased from 81 MPa to 121 MPa compared to conventional welds, while HFMI reached 146 MPa. With an additional LTT weld pass the results varied from 138 MPa to 196 MPa, depending to the shape and residual stress state. The results show that LTT fillers effectively enhance fatigue performance, and that weld geometry and parameter selection are as critical as the chemical composition for maximizing the LTT effect.
CY - Genua, Italy
DA - 22.06.2025
KW - Low transformation temperature (LTT)
KW - Martensite start temperature
KW - Residual stress
KW - Longitudenal stiffener
KW - Fatigue strength
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654520
DO - https://doi.org/10.1007/s40194-026-02356-8
SP - 1
EP - 14
PB - Springer Nature
AN - OPUS4-65452
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kleba-Ehrhardt, Rafael
A1 - Dávila, Josué
A1 - Geissler, Johann
A1 - Mohr, Gunther
A1 - Schmidt, Johannes
A1 - Heinze, Christoph
A1 - Hilgenberg, Kai
A1 - Gurlo, Aleksander
A1 - Karl, David
T1 - Influence of Haynes 282 powder oxidation on powder properties and component quality in laser powder bed fusion
N2 - Reuse of powder in powder bed additive manufacturing is a common practice to enhance sustainability and reduce costs. However, the reusability of metal powder is limited by the oxidation of the powders. Even in a protective atmosphere, each build job leads to gradual oxidation of the powder, which has led to concerns about its impact on powder and part properties. Consequently, strict confidence intervals for oxygen content in nickel-based alloy feedstocks are enforced in the industry. Despite this, there is currently a lack of in-depth studies investigating the specific influence of oxygen on Haynes 282, a widely used nickel-based alloy. This study examines artificially aged Haynes 282 powder batches with oxygen content of 160 ppm, 330 ppm, 1050 ppm, and 1420 ppm. Detailed powder characterization was performed, including morphology, chemical composition, particle size, flowability, and packing behavior. Components were fabricated via PBF-LB/M to evaluate density and mechanical properties. The results showed that higher oxidation levels improved powder flowability and packing density. However, in manufactured parts, irregular melt tracks and increased surface roughness were observed, which could easily be removed by post-processing. No significant differences in density or mechanical properties at room temperature, such as tensile strength and elongation, were found. These findings indicate that H282 powder potentially remains suitable for reuse, even when the batches exhibit increased oxygen content, supporting discussions on revising the existing oxygen content confidence intervals for nickel-based alloys. The results highlight the potential for optimizing recycling strategies and reducing material waste in additive manufacturing processes.
KW - Additive manufacturing
KW - Powder bed fusion
KW - Powder characterization
KW - Powder oxidation
KW - Powder recycling
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654545
DO - https://doi.org/10.1016/j.addma.2025.105050
SN - 2214-8604
VL - 116
SP - 1
EP - 16
PB - Elsevier B.V.
AN - OPUS4-65454
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Avila Calderon, Luis Alexander
A1 - Schriever, Sina
A1 - Hang, Y.
A1 - Olbricht, Jürgen
A1 - Portella, P. D.
A1 - Skrotzki, Birgit
T1 - Creep reference data of single-crystal Ni-based superalloy CMSX-6
N2 - The article presents creep data for the single-crystal, [001]-oriented nickel-based superalloy CMSX-6, tested at a temperature of 980 °C under initial stresses ranging from 140 MPa to 230 MPa. The constant-load creep experiments were performed in accordance with DIN EN ISO 204:2019–4 standard within an ISO 17025 accredited laboratory. A total of 12 datasets are included, each of which includes the percentage creep extension as a function of time. The data series and associated metadata were systematically documented using a data schema specifically developed for creep data of single-crystal Ni-based superalloys. This dataset serves multiple purposes: it can be used to compare with one's own creep test results on similar materials, to verify testing setups (e.g., by replicating tests on the same or comparable materials), to calibrate and validate creep models, and to support alloy development efforts.
KW - NFDI MatWerk
KW - Referenzdaten
KW - Kriechen
KW - CMSX-6
KW - Digitalisierung
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654056
DO - https://doi.org/10.1016/j.dib.2025.112436
VL - 65
SP - 1
EP - 11
PB - Elsevier
AN - OPUS4-65405
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rahner, E.
A1 - Thiele, T.
A1 - Voss, Heike
A1 - Müller, F.A.
A1 - Bonse, Jörn
A1 - Gräf, S.
T1 - Objective, high-throughput regularity quantification of laser-induced periodic surface structures (LIPSS)
N2 - The growing demand for precise surface functionalization through laser-generated periodic surface structures highlights the necessity for efficient, reproducible, and objective evaluation methods to evaluate their structural regularity. We introduce ReguΛarity (v.1.2.7), a freely available, Python-based software with a graphical user interface for the automated, quantitative assessment of the regularity of laser-induced periodic surfaces structures (LIPSS), obtained from optical microscopy, SEM, or AFM. The software integrates image segmentation, one- and two-dimensional Fourier analyses, and gradient-based orientation determination to facilitate a comprehensive regularity analysis of grating-like (quasi-)periodic surface patterns with spatial periods Λ. This is achieved through the proposed regularity tuple R, composed of five key parameters: the normalized spread of the spatial period RΛ,2D (from 2D-FT), the normalized variation of the most frequent spatial period RΛ (from 1D-FT), the Gini coefficient G, the Dispersion of the LIPSS Orientation Angle δθ (DLOA), and the mean phase deviation . To demonstrate its applicability, we compare ideal sinusoidal patterns with SEM images obtained from LIPSS on stainless steel (AISI 316L) and aluminum alloy (AlMg5) surfaces, confirming the software’s ability to objectively distinguish between varying levels of structural regularity. ReguΛarity facilitates high-throughput analysis and data-driven process optimization in surface engineering and laser materials processing.
KW - Laser-induced periodic surface structures (LIPSS)
KW - Image processing
KW - Regularity quantification
KW - Fourier analysis
KW - Structural homogeneity
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654070
DO - https://doi.org/10.1016/j.apsusc.2026.165919
SN - 0169-4332
VL - 726
SP - 1
EP - 12
PB - Elsevier B.V.
AN - OPUS4-65407
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Pittrich, Tim
A1 - Jansen, Daniel
A1 - Weise, Frank
A1 - Stelzner, Ludwig
A1 - Dehn, Frank
T1 - Thermal decomposition in blended cement systems and its effect on fire-induced concrete spalling: Insights from XRD and TGA
N2 - Blended cements are gaining increasing popularity due to their lower CO2-footprint in comparison to ordinary Portland cement (OPC). However, this growing use raises the potential risk of buildings made with blended cement concrete being exposed to fire, which can lead to heavy damages caused by explosive concrete spalling. It has already been shown that the cement type strongly influences the fire-induced concrete spalling and the thermally induced moisture transport, however, to understand the mechanisms behind these findings the thermal decomposition behavior of the cementitious matrix must be investigated more systematically. Therefore, the phase content of three blended cement pastes (CEM II/A-LL, CEM III/A and CEM II/B-Q) was studied in comparison with a Portland cement paste (CEM I) after temperature exposure to 20 ◦C, 105 ◦C, 300 ◦C and 500 ◦C. Clear differences in the initial phase composition and their dehydration behavior between the individual cement types were recognized. In conclusion, blended cements showed lower amounts of AFt and AFm phases and additionally lower amounts of portlandite and C-(A)-S-H were found in CEM III/A and CEM II/B-Q pastes. The results suggest that higher AFt and AFm contents in CEM I, which are associated with greater water release at relatively low temperatures may ultimately reduce the spalling risk. Furthermore, C-(A)-S-H in CEM III/A and CEM II/B-Q showed increased thermal stability and large amounts of non-hydrated phases were found in every blended cement paste. Both of those aspects might contribute to thermomechanical spalling and the overall increased spalling susceptibility observed in blended cement concrete.
KW - Fire concrete spalling
KW - High temperatures
KW - Blended cements
KW - Dehydration
KW - XRD
KW - TGA
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653698
DO - https://doi.org/10.1016/j.cscm.2026.e05784
SN - 2214-5095
VL - 24
SP - 1
EP - 14
PB - Elsevier Ltd.
AN - OPUS4-65369
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Robens-Radermacher, Annika
A1 - Schmidt, Wolfram
A1 - Unger, Jörg F.
A1 - Mezhov, Alexander
T1 - Characterization of temperature influence on the structural build-up of 3D printed concrete
N2 - 3D concrete printing technologies enhance design freedom while reducing material use and costs without the need for formwork. Thereby, structural build-up is the key property governing stability and early strength evolution of 3D printed concrete after placement. Structural build-up is influenced by various factors, i.e., environmental conditions such as temperature. In this paper, the influence of ambient temperature on structural build-up was investigated through experimental and numerical approaches. Three experimental setups (small amplitude oscillatory shear, constant shear rate, and small amplitude oscillatory extensional tests) were applied to materials of increasing complexity under varying temperature conditions. A common modeling framework based on the maturity approach was developed to capture the time and temperature evolution. A stochastic framework was employed to estimate the unknown model parameters using experimental data. Experimental results demonstrate a significant temperature influence on structural build-up, consistent across all test setups and materials. The calibrated models successfully predict the structural build-up under different temperatures, confirming the applicability of the maturity approach to rheological parameters at early age. Furthermore, the stochastic parameter estimation allows a correct quantification of the uncertainties, enhancing model reliability. The comparison of two time evolution formulations indicates that a model with an additional linear stage is required for predicting the increase of the storage moduli (
$${G}{\prime}$$
G
′
,
$${E}{\prime}$$
E
′
). In conclusion, the study demonstrates that temperature significantly affects the structural build-up, and that the proposed modeling approach allows to predict this behavior.
KW - Structural build-up
KW - 3D concrete printing
KW - Rheology
KW - Temperature influence
KW - Modeling
KW - Green intelligent building
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654138
DO - https://doi.org/10.1617/s11527-025-02931-3
SN - 1359-5997
VL - 59
IS - 2
SP - 1
EP - 20
PB - Springer Science and Business Media LLC
AN - OPUS4-65413
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Yu, Jialu
A1 - Oelze, Marcus
A1 - Schannor, Mathias
A1 - Nordstad, Simon
A1 - Vogl, Jochen
T1 - New Potential Haematite and Magnetite Reference Materials for Iron Isotope Measurements by Solution Nebulisation MC ‐ ICP ‐ MS and by In Situ ns ‐ LA ‐ MC ‐ ICP ‐ MS
N2 - Iron isotope ratios of haematite (Fe2O3) and magnetite (Fe3O4) provide insights into geochemical, environmental and planetary processes. In most studies, Fe isotope measurements are commonly performed using solution nebulisation multi-collector inductively coupled plasma-mass spectrometry (SN-MC-ICP-MS). Nanosecond laser ablation multi-collector inductively coupled plasma-mass spectrometry (ns-LA-MC-ICP-MS) requires minimal sample preparation, and provides spatially resolved variation of iron isotopes at micro-scale. However, homogeneous and matrix-matched haematite/magnetite reference materials are lacking for precise in situ isotopic measurement. The iron isotope ratios of two potential reference materials resembling natural haematite (HMIE-NP-B01) and natural magnetite (MAKP-NP-B01) were characterised. Size fractions between 5–63 μm of the powdered Fe oxides were milled to nanoparticles, freeze-dried, homogenised, and pressed into pellets. The materials were then evaluated using SN-MC-ICP-MS and LA-MC-ICP-MS. Sample powders of the two materials were measured by SN-MC-ICPMS after sample digestion and column separation and pressed pellets were analysed directly via ns-LA-MC-ICP-MS. In both cases iron isotope delta values are reported relative to the certified reference material IRMM-014, used as the bracketing standard (calibrator). The solution measurements yielded δ56Fe values of -0.25 ± 0.08‰ (N = 13, 2s) for HMIE-NP-B01, and -0.05 ± 0.09‰ (N = 12, 2s) for MAKP-NP-B01, considered as the preferred Fe isotope delta values. In situ isotopic analysis via ns-LA-MC-ICP-MS yielded δ56Fe values of -0.28 ± 0.28‰ (N = 19, 2s) for HMIE-NP-B01 and -0.12 ± 0.24‰ (N = 22, 2s) for MAKP-NP-B01, consistent with the solution Fe isotope data. The homogeneity of Fe isotopes of the pellets was evaluated by ns-LA-MC-ICP-MS analyses of three different positions to further confirm that both materials are isotopically homogeneous. Both materials can be considered as potential quality control and bracketing reference materials for Fe isotopic measurements by in situ ns-LA-MC-ICP-MS analysis.
KW - Laser ablation
KW - Fe isotope
KW - Fe-oxides
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654755
DO - https://doi.org/10.1111/ggr.70037
SN - 1639-4488
SP - 1
EP - 12
PB - John Wiley & Sons Ltd.
AN - OPUS4-65475
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Schusterbauer, Robert
A1 - Mrkwitschka, Paul
A1 - Sahre, Mario
A1 - Corrao, Elena
A1 - Zurutuza, Amaia
A1 - Doolin, Alexander
A1 - Pellegrino, Francesco
A1 - Radnik, Jörg
A1 - Donskyi, Ievgen S.
A1 - Hodoroaba, Vasile-Dan
T1 - Correlative Chemical Imaging to Reveal the Nature of Different Commercial Graphene Materials
N2 - Proper physicochemical characterization of advanced materials and complex industrial composites remains a significant challenge, particularly for nanomaterials, whose nanoscale dimensions and mostly complex chemistry challenge the analysis. In this work, we employed a correlative analytical approach that integrates atomic force microscopy (AFM), scanning electron microscopy (SEM) coupled with energy‐dispersive X‐ray spectroscopy (EDS), time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS), Auger electron spectroscopy (AES), and Raman spectroscopy. This combination enables detailed chemical and structural characterization with sub‐micrometer spatial resolution. Three commercial graphene‐based materials of varying complexity were selected and investigated to test the analytical performance of this approach. Furthermore, one of the commercial graphene oxide samples was chemically functionalized via amination and fluorination. This allowed us to assess how surface modifications influence both the material properties and the limits of the applied analytical techniques.
KW - Analytical methods
KW - Commercial products
KW - Correlative analysis
KW - Graphene
KW - Surface imaging
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654765
DO - https://doi.org/10.1002/smtd.202502344
SN - 2366-9608
SP - 1
EP - 10
PB - Wiley VHC-Verlag
AN - OPUS4-65476
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wallis, Theophilus
A1 - Ratanaphan, Sutatch
A1 - Darvishi Kamachali, Reza
T1 - Linking atomistic and phase-field modeling of grain boundaries I: Coarse-graining atomistic structures
N2 - The longstanding gap between atomistic and mesoscale simulations partly lies in the absence of a direct, physically grounded connection between atomic structure and mesoscale fields. In this work, we present a robust coarse-graining approach to systematically investigate the connection between phase-field and atomistic simulations of grain boundaries (GBs). The atomistic structures of 408 GBs in BCC-Fe and -Mo were studies to compute and analyze a continuous atomic density field. We discover a fundamental relationship between the GB density---defined as the average atomic density at the GB plane---and the GB excess free volume, an integral property of the boundary. An almost perfect linear correlation between the GB atomic density and GB excess free volume is identified. We also show that the width of BCC GBs, when scaled by the lattice constant, approaches a universal constant value. The relationships among GB density, width, and energy are systematically examined for various GB planes, and the GB energy--density correlations are classified with respect to GB types. It turns out that the atomic planes forming the GB strongly influence both the GB density and excess volume. The current results establish a dependable framework to bridge across scales, enabling density-based phase-field modeling of GBs with atomistic fidelity and enhancing the predictive reliability of mesoscale simulations.
KW - Density-based model
KW - Grain boundary structure
KW - Grain boundary thermodynamic
KW - Atomistic simulations
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654872
DO - https://doi.org/10.1016/j.actamat.2025.121786
SN - 1359-6454
VL - 305
SP - 1
EP - 14
PB - Elsevier Inc.
AN - OPUS4-65487
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wallis, Theophilus
A1 - Darvishi Kamachali, Reza
T1 - Linking atomistic and phase-field modeling of grain boundaries II: Incorporating atomistic potentials into free energy functional
N2 - The density-based phase-field model for grain boundary (GB) thermodynamics and kinetics has offered a broad range of applications in alloy and microstructure design. Originally, this model is based on a potential energy terms that is connected to the cohesive energy of a given substance. A more rigorous approach, however, is a full consideration of an interatomic potential over the possible range of distance and therefore density. In Manuscript I of this series, we developed and thoroughly analyzed the coarse-graining of atomistic GB structures. In this work (Manuscript II), we complete the coupling between atomic and mesoscale modeling of GBs by incorporating the full interatomic potentials into the density-based free energy functional. Using GB energies calculated from atomistic simulations, the coarse-graining approach and the atomistic-integrated density-based Gibbs free energy, we effectively evaluate the density gradient energy coefficient. We found that coupling the density-based model with atomistic potentials reveal physically-sound trends in the GB equilibrium properties. A universal equation was derived to describe the potential energy contribution to the GB energy and the gradient energy coefficient for BCC-Fe and -Mo GBs, similar to the universal equation for GB excess free volume presented in Manuscript I. The proposed approach provides a mesoscale density-based model rooted in atomic-scale characteristics for reliable predictions of GB properties.
KW - Density-based model
KW - Phase-field
KW - Grain boundary structure
KW - Grain boundary thermodynamics
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654904
DO - https://doi.org/10.1016/j.actamat.2025.121787
SN - 1359-6454
VL - 305
SP - 1
EP - 17
PB - Elsevier
AN - OPUS4-65490
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scharpmann, Philippa
A1 - Leonhardt, Robert
A1 - Schmidt, Anita
A1 - Kowal, Julia
A1 - Tichter, Tim
A1 - Krug von Nidda, Jonas
T1 - Exploring restrictive overdischarge cycling as a method to accelerate characteristic ageing in lithium-ion cells
N2 - This study presents a test protocol that greatly accelerates the ageing process of lithium-ion battery cells comprising a positive electrode of nickel manganese cobalt oxide while preserving their characteristic degradation upon cyclic ageing. Applying a repetitive restricted overdischarge, resulting in a depth of discharge larger than 100%, a capacity loss of 20% is achieved over five times faster compared to conventional cycling. The well-known overdischarge degradation phenomenon of copper current collector dissolution is deliberately prevented by setting a discharge cutoff voltage above the theoretical threshold of copper oxidation. Hence, the accelerated degradation can be primarily connected to solid electrolyte interphase growth.
A comparative assessment of the ageing dynamics using electrochemical impedance spectroscopy and differential voltage analysis hints towards similar, characteristic degradation processes during accelerated and conventional ageing. A post-ageing examination of the electrical behaviour (i.e., coulombic and energy efficiency, capacity fade) under reference conditions reveals very little to no lasting damages caused by
overdischarging. Additionally, post-mortem analysis discloses no increased copper dissolution when comparing cells subjected to accelerated and conventional ageing. Generally, the developed ageing method appears suitable for providing cells with a defined state of health at a reasonable timescale without altering the main degradation mechanisms significantly.
KW - Lithium-ion cell
KW - Accelerated ageing
KW - Overdischarge
KW - Degradation processes
KW - Differential voltage analysis
KW - Electrochemical impedance spectroscopy
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650917
DO - https://doi.org/10.1016/j.jpowsour.2025.239072
SN - 0378-7753
VL - 665
SP - 1
EP - 9
PB - Elsevier B.V.
AN - OPUS4-65091
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scholl, Juliane
A1 - Lisec, Jan
A1 - Bagheri, Abbas
A1 - Meiers, Emelie
A1 - Russo, Francesco Friedrich
A1 - Haase, Hajo
A1 - Koch, Matthias
T1 - Unveiling aging mechanisms of electrolytes in commercial end-of-life lithium-ion batteries
N2 - In this study, 77 end-of-life (EOL) commercial lithium-ion batteries (LIBs) of various formats were systematically analyzed to investigate electrolyte degradation and the influence of pristine electrolyte compositions on aging behavior. Comprehensive chemical characterization was conducted using targeted and non-targeted mass spectrometry (MS), employing LC-MS/MS, GC-MS, and high-resolution MS (HRMS). This integrated approach enabled the identification of confirmed pristine components and complex degradation products. The results show that rechargeable pouch and cylindrical cells often deviate from conventional model systems, containing mixed lithium salt anions, ionic liquids (ILs), and high concentrations of triflates, triflimides, and bis(fluorosulfonyl)imide (FSI). These function as solvents, salts, or safety-enhancing additives. Specific IL degradation products were identified, and hypotheses formulated on previously unreported pathways. Furthermore, a novel series of oligomerization products of propylene carbonate (PC) was detected. In contrast, non-rechargeable coin cells revealed widespread use of per- and polyfluoroalkyl substances (PFAS) in their original electrolytes. Based on ex situ analyses, hypothetical PFAS degradation mechanisms are proposed here for the first time. The absence of carbonate oligomers and lithium salt-derived products, alongside the presence of standard carbonates, indicates lithium counterion coordination as a key factor in Lewis acid-catalyzed degradation. This study offers valuable insights into real-world battery aging.
KW - Transformation products
KW - Lithium-ion batteries
KW - Fluorinated Compounds
KW - Gas chromatography/ QTOF-MS
KW - HILIC-LC-MS/MS
KW - PFAS
KW - Electrochemistry
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-644991
DO - https://doi.org/10.1016/j.jpowsour.2025.238613
SN - 0378-7753
VL - 661
SP - 1
EP - 10
PB - Elsevier B.V.
AN - OPUS4-64499
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Shovo, Redoy Gazi
A1 - Thünemann, Andreas
A1 - Katcharava, Zviadi
A1 - Marinvo, Anja
A1 - Hoppe, Richard
A1 - Woltersdorf, Georg
A1 - Du, Mengxue
A1 - Androsch, Rene
A1 - de Souza e Silva, Juliana Martins
A1 - Busse, Karste
A1 - Binder, Wolfgang H.
T1 - Generating Tagged Micro- and Nanoparticles of Poly(ethylene furanoate) and Poly(ethylene terephthalate) as Reference Materials
N2 - Detecting nanoplastic particles in environmental samples and biological tissues remains a significant challenge, especially in view of newly emerging polymers, not yet commercially exploited. Fluorescent labeling provides a tagging strategy to overcome this limitation by reducing the detection limit of individual particles, especially for small-sized particles. We present a method for producing labeled nanoparticles (NP/MP) of poly(ethylene terephthalate) (PET) and poly(ethylene furanoate) (PEF), tagged with Alexa Fluor 633 or Alexa Fluor 647. Our preparations used mechanical grinding or solvent-based approaches (confined impinging jet mixing, ((CIJ, precipitation), generating particles with hydrodynamic diameters of 200–700 nm, displaying long-term stability in water of up to 57 days. Stable suspensions with concentrations of the particles ranging from 10 µg/mL (surfactant-free, by solvent mixing) to 5.88 mg/mL (precipitation, containing surfactant) were generated with zeta-potentials from −5 to −50 mV. Characterization of the nanoparticles by SEC, DSC, and XRD showed no significant changes in molecular weight, thermal behavior, or crystallinity via the solvent-based methods, compared to the pristine polymer, highlighting their suitability for producing standardized nanoparticle dispersions. Fluorescence spectroscopy of the Alexa-dye-labeled particles confirmed the successful incorporation of the Alexa dyes, so improving monitoring of their biological profiles of the PEF-MP/NPs. s-SNOM (near field imaging) could identify individual PEF-particles sized ∼200 nm by direct imaging.
KW - Reference Materials
KW - Nanoplastics
KW - Microplastics
KW - Polymer
KW - Fluorescence
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655531
DO - https://doi.org/10.1002/marc.202500839
SN - 1521-3927
VL - 47
IS - 4
SP - 1
EP - 11
PB - Wiley VHC-Verlag
CY - Weinheim
AN - OPUS4-65553
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Prakash, Swayam
A1 - Bell, Jérémy
A1 - Rurack, Knut
T1 - Rapid Onsite Detection of Fecal Contamination in Water Using a Portable Fluorometric Assay
N2 - Fecal pollution in water poses significant health risks, especially when contaminated sources are used for drinking and food production. Traditional water quality testing methods are expensive, slow, and require skilled personnel, limiting their accessibility. This work addresses these issues by developing a portable fluorometric assay for the detection of the fecal indicator pigment urobilin (UB). The assay uses silane-functionalized glass fiber strips impregnated with zinc chloride, providing a ‘drop-&-detect’ approach with enhanced fluorescence response mediated by the unique complexation properties of ZnCl2 and UB. This approach allows for the detection of UB at sub-nanomolar concentrations in less than 1 min using a 3D-printed setup with miniaturized optical components powered by a smartphone with its camera as a detector. The results validated with a benchtop fluorometer show the effectiveness of this method. The successful application of this userfriendly, rapid, and sensitive assay to real water samples from three rivers and the influx and efflux of a wastewater treatment plant advances field-based water quality monitoring, meets the WHO’s ASSURED criteria, and supports progress toward the global clean water and sanitation goals.
KW - Fecal pigment
KW - Fluorescence
KW - Signal amplification
KW - Surface chemistry
KW - Water quality testing
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655543
DO - https://doi.org/10.1021/acssensors.5c03922
SN - 2379-3694
VL - 11
SP - 1
EP - 9
PB - American Chemical Society
CY - Washington, D.C.
AN - OPUS4-65554
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Pei, R.
A1 - Petrazoller, J.
A1 - Atila, Achraf
A1 - Arnoldi, S.
A1 - Xiao, L.
A1 - Liu, X.
A1 - Wang, H.
A1 - Korte-Kerzel, S.
A1 - Berbenni, S.
A1 - Richeton, T.
A1 - Guénolé, J.
A1 - Xie, Z.
A1 - Al-Samman, T.
T1 - Solute co-segregation mechanisms at low-angle grain boundaries in magnesium: A combined atomic-scale experimental and modeling study
N2 - Solute segregation at low-angle grain boundaries (LAGBs) critically affects the microstructure and mechanicalproperties of magnesium (Mg) alloys. In modern alloys containing multiple substitutional elements, understanding solute-solute interactions at microstructural defects becomes essential for alloy design. This study investigates the co-segregation mechanisms of calcium (Ca), zinc (Zn), and aluminum (Al) at a LAGB in a dilute Mg-0.23Al-1.00Zn-0.38Ca (AZX010) alloy by combining atomic-scale experimental and modeling techniques.Three-dimensional atom probe tomography (3D-APT) revealed significant segregation of Ca, Zn, and Al at the LAGB, with Ca forming linear segregation patterns along dislocation arrays characteristic of the LAGB. Clustering analysis showed increased Ca–Ca pairs at the boundary, indicating synergistic solute interactions.
Atomistic simulations and elastic dipole calculations demonstrated that larger Ca atoms prefer tensile regions around dislocations, while smaller Zn and Al atoms favor compressive areas. These simulations also found that Ca–Ca co-segregation near dislocation cores is energetically more favorable than other solute pairings, explaining the enhanced Ca clustering observed experimentally. Thermodynamic modeling incorporating calculated segregation energies and solute-solute interactions accurately predicted solute concentrations at the LAGB, aligning with experimental data. The findings emphasize the importance of solute interactionsat dislocation cores in Mg alloys, offering insights for improving mechanical performance through targeted alloying and grain boundary engineering.
KW - Atomic probe tomography
KW - Atomistic simulation
KW - Grain boundary
KW - Co-segregation
KW - Magnesium alloy
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655248
DO - https://doi.org/10.1016/j.actamat.2026.121947
SN - 1359-6454
VL - 306
SP - 1
EP - 13
PB - Elsevier Inc.
AN - OPUS4-65524
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Redda, Zinnabu Tassew
A1 - Prinz, Carsten
A1 - Yimam, Abubeker
A1 - Barz, Mirko
A1 - Becker, Katharina
A1 - Gizaw, Desta Getachew
A1 - Laß-Seyoum, Asnakech
T1 - Structural and textural characterization of Brassica carinata biochar to investigate its potential industrial applications
N2 - Biochar, a low-cost, and carbon-rich product of the thermal decomposition of biomass under oxygen-limited conditions and at relatively low temperatures, has recently been identified as a promising porous material with a wide range of industrial applications. In the present study, a comprehensive analysis of proximate, ultimate, nutrient profile, structural, and textural properties of a biochar derived from two Ethiopian indigenous Brassica carinata cultivars was conducted. The characterization of the biochar was achieved by employing a variety of well-established methods, including proximate analysis (moisture, volatile matter, ash content, and fixed carbon), ultimate analysis (C, S, and O content), atomic oxygen to carbon ratio (O/C), morphological and elemental composition analysis through scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS). Furthermore, a combination of mercury intrusion porosimetry (MIP), dynamic vapor sorption (DVS), and gas adsorption methods such as nitrogen and krypton gas adsorption, were used for an in-depth study of the porous structure. SEM morphological characterization showed that the biochar surfaces showed multiple pores of diverse sizes and shapes. EDS elemental composition analysis revealed that sodium, aluminium, and silicon were not detected, but potassium, calcium, magnesium, and iron were all present in noticeable amounts. Furthermore, ultimate analysis showed that the most prevalent elements were carbon (86 wt.%) and oxygen (10.41‒9.77 wt.%), while sulphur was present in negligible concentrations. MIP analysis demonstrated that the porosities of the biochars varied from 62.68 to 69.99 wt.%, with the Holetta-1 biochar showing the highest porosity. The superior porosity of Holetta-1, as confirmed via MIP analysis, yielded higher values for bulk volume (2.36 mL g− 1), skeletal volume (1.65 mL g− 1), and total intrusion volume (1.65 mL g− 1) compared to the Yellow Dodolla. The most frequent pore diameters were 172.46 μm for Yellow Dodolla and 111.42 μm for Holetta-1. The MIP log differential pore diameter distributions were observed to vary from 18 to 411 μm and 10 to 411 μm, respectively, for Yellow Dodolla and Holetta-1. Despite the biochars’ low specific surface areas (0.17–0.21 m² g⁻¹), krypton sorption was a suitable technique for its characterization compared to DVS and nitrogen sorption methods. In conclusion, the characterization studies confirmed that this carbon-rich porous material possesses unique and valuable properties, with these attributes position it as a promising alternative for diverse industrial applications, contributing to the development of a bio-based circular economy.
KW - Morphological characterization
KW - Mercury intrusion porosimetry
KW - Gas adsorption
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655325
DO - https://doi.org/10.1038/s41598-025-32063-1
SN - 2045-2322
VL - 16
IS - 1
SP - 1
EP - 19
PB - Springer Science and Business Media LLC
AN - OPUS4-65532
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wang, Kun
A1 - Schukar, Marcus
A1 - Hicke, Konstantin
A1 - Lu, Xin
T1 - Effect of humidity on fiber-optic temperature sensing
N2 - This study investigates the influence of ambient humidity on the temperature sensitivity, measurement accuracy, and uncertainty of optical fibers with different coatings, using a Rayleigh-based distributed sensing technique. Polymer-coated fibers (acrylate and polyimide) and metal-coated fibers (copper and gold) were tested under controlled humidity (30%–90% RH) and temperature (20–60 °C) conditions. Rayleigh-based measurements revealed a slight but consistent decrease in temperature sensitivity with increasing humidity for all polymer-coated fibers, attributed to humidity-induced changes in coating stiffness and strain transfer. In contrast, metal-coated fibers exhibited humidity-independent behavior and superior stability. These findings highlight the non-negligible role of ambient humidity in fiber-optic temperature sensing, particularly in Rayleigh-based systems using hygroscopic coatings. The results provide practical guidance for fiber and coating selection in humid environments and offer broader insight into humidity–strain–temperature coupling mechanisms relevant to other fiber-optic sensing mechanisms.
KW - Distributed sensing
KW - Humidity effect
KW - Temperature sensing
KW - Optical fiber coatings
KW - Temperature uncertainty
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650040
DO - https://doi.org/10.1016/j.measurement.2025.119905
SN - 0263-2241
VL - 261
SP - 1
EP - 9
PB - Elsevier Ltd.
AN - OPUS4-65004
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gerrits, Ruben
A1 - Stepec, Biwen An
A1 - Bäßler, Ralph
A1 - Becker, Roland
A1 - Dimper, Matthias
A1 - Feldmann, Ines
A1 - Goff, Kira L.
A1 - Günster, Jens
A1 - Hofmann, Andrea
A1 - Hesse, René
A1 - Kirstein, Sarah
A1 - Klein, Ulrich
A1 - Mauch, Tatjana
A1 - Neumann-Schaal, Meina
A1 - Özcan Sandikcioglu, Özlem
A1 - Taylor, Nicole M.
A1 - Schumacher, Julia
A1 - Shen, Yin
A1 - Strehlau, Heike
A1 - Weise, Matthias
A1 - Wolf, Jacqueline
A1 - Yurkov, Andrey
A1 - Gieg, Lisa M.
A1 - Gorbushina, Anna
T1 - A 30-year-old diesel tank: Fungal-dominated biofilms cause local corrosion of galvanised steel
N2 - The increased use of biodiesel is expected to lead to more microbial corrosion, fouling and fuel degradation issues. In this context, we have analysed the metal, fuel and microbiology of a fouled diesel tank which had been in service for over 30 years. The fuel itself, a B7 biodiesel blend, was not degraded, and—although no free water phase was visible—contained a water content of ~60 ppm. The microbial community was dominated by the fungus Amorphotheca resinae, which formed thick, patchy biofilms on the tank bottom and walls. The tank sheets, composed of galvanised carbon steel, were locally corroded underneath the biofilms, up to a depth of a third of the sheet thickness. On the biofilm-free surfaces, Zn coatings could still be observed. Taken together, A. resinae was shown to thrive in these water-poor conditions, likely enhancing corrosion through the removal of the protective Zn coatings.
KW - Fungal biofilms
KW - Biodiesel degradation mechanisms
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655014
DO - https://doi.org/10.1038/s41529-025-00731-2
SN - 2397-2106
VL - 10
IS - 1
SP - 1
EP - 14
PB - Springer Science and Business Media LLC
AN - OPUS4-65501
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rodricks, Carol Winnifred
A1 - Prockat, Annabell
A1 - Kalinka, Gerhard
A1 - Trappe, Volker
T1 - Novel Recyclable Hierarchical Carbon Fiber/Epoxy Composites: Preserving Fiber Length and Orientation Using Elium
N2 - Current recycling methods for polymer matrix composites produce short, unoriented carbon fibers, limiting their use to intermediate‐strength applications. A method is therefore needed to recycle fibers while preserving their original length and orientation, enabling a circular economy for carbon fiber composites. This study proposes a novel hierarchical composite designed to retain fiber length and orientation during recycling. Virgin carbon fibers are encased in an insoluble epoxy matrix to form tapes that act as the primary units of the structure. The primary tape matrix shields the fibers from chemical degradation while preserving their alignment throughout recycling. The tapes are then embedded in a secondary recyclable matrix, Elium, a thermoplastic polymer soluble in acetone with mechanical properties comparable to epoxy. The composite is recycled by dissolving the secondary Elium matrix in acetone and recovering the primary tape units with intact fiber length and orientation. The primary units can then be used to assemble new composites. In this study, hierarchical composite laminates underwent recycling up to three times. Their mechanical properties were assessed after each cycle. Laminates with an Elium secondary matrix retained 60%–90% of the mechanical performance of epoxy‐based laminates. Minimal degradation was observed between cycles, and fiber length, orientation, and volume fraction were fully preserved. Pushout tests confirmed that fibers in the primary tapes were sufficiently shielded during the recycling process. These results validate the feasibility of a hierarchical recyclable composite that combines recyclability with high mechanical performance, serving as a proof of concept and providing opportunities for future development.
KW - Review
KW - Interface
KW - Micromechanics
KW - Polymer matrix composites
KW - Glass fibre reinforced composites
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655276
DO - https://doi.org/10.1002/pc.70869
SN - 0272-8397
SP - 1
EP - 16
PB - Wiley Periodicals LLC.
AN - OPUS4-65527
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kästle, Emanuel D.
A1 - Duffner, Eric
A1 - Popiela, Bartosz
A1 - Ghaznavi, Ali
T1 - Monitoring Failure of Composite Pressure Vessels with Acoustic Emissions
N2 - Two carbon fiber reinforced type IV pressure vessels are subjected to step-wise pressurization until burst, while monitored using acoustic emissions (AE). Unlike most prior studies, AE data is collected throughout the entire damage progression. The vessels, manufactured with differing parameters, failed in distinct composite layers – A-type in the hoop layers and B-type in the helical layers. The AE signals are evaluated to study material degradation and identify fiber breaks as signs of critical damage accumulation. The signals are distributed randomly across the surface, with localized accumulation only minutes before rupture, close to the rupture plane. The difference in manufacturing parameters did not result in any clear difference in the AE activity. Felicity and Shelby ratios show consistent decline with increasing pressure, suggesting potential for damage assessment and burst prediction. It is discussed how these ratios are affected by coupling quality of the AE sensors, the shape of the pressurization profile and prior loadings. Different signal features based on the amplitude and the frequency content are extracted for a classification into failure mechanisms. Based on previous studies, AE signals corresponding to fiber breaks have a characteristic high-frequency spectrum and show a delay in occurrence, with an increase in the number of breaking fibers towards the end of the experiment. Indeed, high frequency signals tend to occur later and signals in specific peak-frequency ranges (350 – 400 kHz, 500 kHz) somewhat resemble the expected behavior. However, the dataset is too variable and too incongruent for any clear interpretations. Likely reasons are signal propagation effects, the complex composite structure, simultaneous occurrence of signals and measurement uncertainties. A review of relevant studies is provided to show that similar issues affect also previous works. Successfully identifying fiber breaks in large-scale, complex composite structures based on AE data, and turning this into an applicable health-monitoring technique, therefore remains a challenge.
KW - Acoustic emission testing
KW - Composite pressure vessels
KW - Damage classification in fiber reinforced polymers
KW - Felicity ratio
KW - Composite failure
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654852
DO - https://doi.org/10.1007/s10921-025-01319-1
SN - 0195-9298
VL - 45
IS - 1
SP - 1
EP - 19
PB - Springer Science and Business Media LLC
AN - OPUS4-65485
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dixneit, J.
A1 - Gibmeier, J.
A1 - Kromm, Arne
A1 - Schubnell, J.
A1 - Lang, F.
A1 - Loebich, F.
A1 - Carl, E.-R.
A1 - Ya, W.
T1 - Residual stress distribution of a large component manufactured by AM-DED-Arc from high-strength weld filler material X90
N2 - Currently, DED-Arc manufactured components are not covered by design guidelines, and design factors such as residual stress factors are not defined for such components. This hinders industrial use, especially for components with a remaining surface waviness required by industry. For the first time the stress state of a high-strength, low-alloy, large-scale DED-Arc component was characterised in the as-built state and after cutting off the component from the substrate plate. Complementary methods of residual stress analyses were applied to gain a holistic insight into the residual stress distributions of a thick-walled part. In the as-built state, direction-dependent and position-dependent tensile residual stresses were found for the component at the level of the yield strength of the part. The additive manufacturing strategy continuous spiral deposition has no significant influence on the residual stresses in bead threshold area compared to the residual stresses of the remaining component. For this case, bead threshold is no structural imperfection. By removing the part from the substrate plate, the residual stresses are significantly redistributed. Tensile residual stresses are then present at a moderate level. Compressive residual stresses were determined in the volume of the deposited material. The general consideration of ‘‘high’’ tensile residual stresses in such thick-walled components is rather conservative. Therefore, design guidelines should take the manufacturing condition into account.
KW - AM-DED-Arc
KW - Residual stress
KW - High strength steel
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655239
DO - https://doi.org/10.1177/03093247251406876
SN - 2041-3130
SP - 1
EP - 18
PB - SAGE
AN - OPUS4-65523
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gook, Sergej
A1 - Biegler, Max
A1 - Gumenyuk, Andrey
A1 - Rethmeier, Michael
T1 - Integration of hybrid laser-arc and narrow gap submerged arc welding for cost-effective joining of 80 mm thick S355ML steel plates
N2 - This paper presents the results of developing a cost-effective, robust process for welding thick steel plates. Welding trials were performed on S355ML structural steel plates with a thickness of 80 mm. A specially designed U-shaped joint preparation with a 45 mm root face was proposed to enable thick welds to be welded using a combined technique. In the developed process, a hybrid laser arc weld (HLAW) is performed as the first pass. Subsequently, narrow-gap submerged arc welding (NG-SAW) is applied to the opposite side using a multi-layer technique. The weld cross-section is completed using a reliable overlap of both the HLAW and NG-SAW welds. This method achieves a 2.9-fold reduction in weld volume and filler material consumption, as well as shorter production times for thick-walled welds. Further advantages of the process combination include eliminating the need to form the root of the HLAW weld and the absence of a backing support. The applied process parameters ensure that the maximum heat input does not exceed 5 kJ/mm, leading to uniform hardness across the weld metal and heat-affected zone (HAZ). Impact toughness testing at −40 °C demonstrated excellent performance, with Charpy V-notch energies of 138 ± 45 J in the arc-dominated region and 65 ± 12 J in the critical laser-dominated zone of the HLAW weld. In addition, the NG-SAW weld exhibited an average Charpy V-notch energy of 274 ± 5 J, confirming excellent low-temperature toughness of the fill passes. Owing to its high process stability and practical applicability, the proposed welding approach shows high potential for integration into the fabrication of thick-walled offshore constructions.
KW - Hybrid laser arc welding
KW - Narrow gap submerged arc welding
KW - Low carbon structural steel
KW - Fusion zone size
KW - Microstructure
KW - Impact absorbed energy
KW - Hardness
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655627
DO - https://doi.org/10.1016/j.optlastec.2026.114796
SN - 0030-3992
VL - 197
SP - 1
EP - 12
PB - Elsevier Ltd.
AN - OPUS4-65562
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tiwari, Jitendar Kumar
A1 - Malladi, Bala
A1 - Mishurova, Tatiana
A1 - Fritsch, Tobias
A1 - Nyborg, Lars
A1 - Cao, Yu
T1 - Influence of contour parameters on the surface roughness of fine channels produced by powder bed fusion-laser beam
N2 - Surface roughness strongly influences the performance of fine internal channels in additively manufactured components. This study investigates how contour process parameters affect the surface finish of 1 mm-diameter channels produced by powder bed fusion–laser beam (PBF-LB). Five contour parameter sets with progressively increasing laser energy density (LED) were applied, while keeping infill parameters constant. Surface roughness was evaluated using surface profilometry, X-ray computed tomography (XCT), and optical microscopy (OM). Profilometry and OM provided localized measurements, whereas XCT captured full-channel roughness along the build direction. Results show that increasing LED initially reduces surface roughness due to improved melting and removal of partially fused particles, reaching optimal smoothness at an intermediate LED. Further LED increase causes roughness to rise again, attributed to balling and dross formation. Optical cross-sections depicted these trends, and XCT measurements closely matched profilometry data. The findings in this study highlight a trade-off between surface quality and dimensional accuracy, as higher LEDs improve smoothness but reduce channel diameter. This work establishes an optimal contour LED range for minimizing as-built surface roughness in fine internal channels, which can enhance the functional performance of PBF-LB components in aerospace, medical, and energy applications.
KW - Additive manufacturing
KW - PBF-LB
KW - Surface roughness
KW - Computed tomography
KW - Optical tomography
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655677
DO - https://doi.org/10.1016/j.vacuum.2026.115085
SN - 0042-207X
VL - 246
SP - 1
EP - 10
PB - Elsevier Ltd.
CY - Niederlande
AN - OPUS4-65567
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gaal, Mate
A1 - Wernicke, Pascal
T1 - Improved air-coupled ultrasonic transmission using pulse compression
N2 - Air-coupled ultrasonic testing avoids contamination and reduces maintenance costs, but suffers from poor signal-to-noise ratio (SNR) due to impedance mismatch. Rather than developing new transducers, this study improves SNR through signal processing by adapting pulse compression from radar.We propose a method using unipolar square pulses to make pulse compression compatible with non-linear transducers such as ferroelectrets and thermoacoustic emitters. Instead of relying on analytical models, a reference transmission measurement served as the matched filter, simplifying implementation and ensuring adaptability across transducer types. We evaluated unipolar coded excitation and pulse compression on ultrasonic transmission through a 25mm polyvinyl chloride plate, varying code length and pulse delay. Significant SNR gains were observed across transducers, particularly with longer delays. These results confirm that pulse compression enhances peak localization and supports testing under low-SNR conditions.
Further experiments showed that pulse compression remains effective despite side lobe overlap and noise, provided the pulse delay is chosen appropriately. Although SNR prediction is limited by electrical and acoustic interference, the method consistently improves detection. Overall, the results demonstrate the feasibility of unipolar excitation coding for pulse compression in air-coupled ultrasonic testing, with practical value for thick or attenuating materials.
KW - Air-coupled ultrasound
KW - Coded excitation
KW - Pulse compression
KW - Transducers
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655005
DO - https://doi.org/10.1109/OJUFFC.2026.3659047
SN - 2694-0884
VL - 6
SP - 9
EP - 16
PB - Institute of Electrical and Electronics Engineers (IEEE)
AN - OPUS4-65500
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gaal, Mate
A1 - Álvarez-Arenas, Tomás Gómez
T1 - Guest Editorial: Special Section on Air-Coupled Ultrasound
N2 - Air-coupled ultrasound is a challenging field dominated by the drastic impedance mismatch between air and all condensed matter, the low ultrasound velocity in the air, and the rapidly increasing attenuation with frequency.
The seven articles included in this special section showcase the diversity of current research on air-coupled ultrasound. All contributions in this special section are application-oriented, demonstrating the readiness of air-coupled ultrasound technologies to address real-world challenges. Whether it’s ensuring food safety, supporting heritage conservation, optimizing industrial inspection, or enabling in-field biological measurements, the practical relevance of these studies makes this section
particularly valuable for both researchers and industry professionals.
KW - Air-coupled ultrasound
KW - Transducers
KW - Non-destructive testing
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655041
DO - https://doi.org/10.1109/OJUFFC.2026.3656857
SN - 2694-0884
VL - 6
SP - 1
EP - 2
PB - Institute of Electrical and Electronics Engineers (IEEE)
AN - OPUS4-65504
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hajhariri, Aliasghar
A1 - Eberwein, Robert
A1 - Camplese, Davide
A1 - Scarponi, Giordano Emrys
A1 - Cozzani, Valerio
A1 - Seidlitz, Holger
T1 - Cryogenic storage safety: Experimental evaluation of insulation under extreme conditions
N2 - Hydrogen is recognized as a keystone of the global energy transition, offering a clean, high-energy-density energy carrier ideal for storage and transportation. Among various storage options, liquid hydrogen (LH2) is especially advantageous for both mobile and stationary applications. However, ensuring the safety and performance of LH2 storage systems under extreme thermal conditions, such as fire exposure, remains an engineering challenge.
This study introduces an experimental framework, called the Cryogenic High-Temperature Thermal Vacuum Chamber (CHTTVC), designed to investigate the thermal-hydraulic response of vacuum-insulated cryogenic tanks under fire-like conditions. The apparatus enables evaluation of insulation performance, such as perlite and multilayer insulation (MLI), with a focus on thermal degradation, heat ingress, and vacuum stability.
Results indicate that combustible MLIs undergo substantial thermal degradation, leading to heat ingress rates of up to 6.5 kW and the formation of hazardous combustion by-products. In contrast, non-combustible MLIs and bulk insulation materials restrict heat ingress to approximately 3 kW while more effectively preserving vacuum integrity. Combustible MLIs also exhibit pronounced pressure increases in the evacuated section, reaching ∼6 × 104 Pa, nearly six times higher than those observed for non-combustible counterparts. Analysis of effective emissivity further reveals an enhancement in radiative heat transfer, approximately five times, for combustible MLIs following degradation. Additionally, marked thermal stratification develops under both nominal and extreme heat loads, with temperature gradients approaching 10 °C per 100 mm during sustained thermal exposure.
KW - Multi-Layer Insulation
KW - Cryogenic Storage
KW - Safety
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655380
DO - https://doi.org/10.1016/j.jlp.2026.105961
SN - 0950-4230
VL - 101
SP - 1
EP - 20
PB - Elsevier Ltd.
AN - OPUS4-65538
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Vogel, Christian
A1 - Helfenstein, J.
A1 - Massey, M.
A1 - Kretzschmar, R.
A1 - Schade, U.
A1 - Verel, R.
A1 - Chadwick, O.
A1 - Frossard, E.
T1 - Spectroscopic analysis shows crandallite can be a major component of soil phosphorus
N2 - Phosphorus (P) bioavailability is crucial for the productivity of natural and agricultural ecosystems, and soil P speciation plays a major role therein. Better understanding of P forms present in soil is thus essential to predict bioavailability. However, P speciation studies are only as powerful as the reference spectra used to interpret them, and most studies rely on a limited set of reference spectra. Most studies on soil P forms differentiate between Ca-bound P (e.g. apatite), organic P, Fe-bound P, and Al-bound P. In our analysis of a Ca, Al, and P rich soil from the Kohala region of Hawaii, we identified the mineral crandallite, CaAl3(PO4)2(OH)5·H2O, a mineral previously not considered to play a significant role in soils. Crandallite was first identified with powder X-ray diffraction. Subsequently reference spectra were collected, and the presence of crandallite was confirmed using micro-focused P K-edge X-ray absorption near edge structure (XANES) spectroscopy, micro-infrared spectroscopy, and solid-state 31P nuclear magnetic resonance (NMR) spectroscopy. Crandallite XANES spectra were distinct from other common XANES spectra due to the presence of features in the post-edge region of the spectrum. Linear combination fitting of bulk P K-edge XANES spectra allowed the determination of the proportion of crandallite to the total P content, indicating that crandallite comprises up to half, possibly even more of the soil P in the samples. Crandallite is therefore an important and potentially overlooked component of soil P, which pedogenically forms in soils with high P, Al, and Ca contents, where it could play an important role in P bioavailability.
KW - Phosphorus
KW - XANES spectrosocpy
KW - Infrared spectroscopy
KW - NMR spectrocopy
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654968
DO - https://doi.org/10.1016/j.geoderma.2026.117712
SN - 0016-7061
VL - 467
SP - 1
EP - 10
PB - Elsevier B.V.
AN - OPUS4-65496
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Markötter, Henning
A1 - Sintschuk, Michael
A1 - Bruno, Giovanni
T1 - X-ray computed tomography scanning schemes and reconstruction capabilities at the BAMline (BESSY II)
N2 - The BAMline at the BESSY II synchrotron (Berlin, Germany) is a multipurpose beamline that is used for computed tomography, among other techniques. For more than 20 years it has been used in various scientific fields to access and analyze internal structural features such as porosity, cracks or delamination. The general trend of tomographic X-ray imaging is moving towards in situ and operando studies to access the above-mentioned features under the most realistic conditions. This article presents the X-ray computed tomography (XCT) capabilities and the software suite, such as live reconstruction available to imaging users. Direct XCT reconstruction plays an important role in the quality control of the performed experiments and is particularly crucial for in situ and operando experiments. The BAMline now offers a sequence-based step-scan XCT that enables preview reconstruction during the scan to gain early insight into the scanned sample even while the scan is in progress. In addition, the sequence-based scheme includes lateral shifts, thereby mitigating ring artifacts and improving image quality. Finally, since XCT scan parameters, such as sample–detector distance and beam energy, are of utmost importance, we devised calculation software allowing control of monochromators to set the desired beam spectrum.
KW - Synchrotron X-ray imaging
KW - Computed tomography
KW - Preview reconstruction
KW - CT scan scheme
KW - Software workflow
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655792
DO - https://doi.org/10.1107/S1600577526001177
VL - 33
SP - 543
EP - 550
AN - OPUS4-65579
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Appel, Paul Alexander
A1 - Prinz, Carsten
A1 - Low, Jian Liang
A1 - Asres, Nahom Enkubahri
A1 - Wu, Shu-Han
A1 - Freytag, Annica
A1 - Krug von Nidda, Jonas
A1 - de Sousa Amadeu, Nader
A1 - Fellinger, Tim-Patrick
T1 - Core‐Shell: Resolving the Dilemma of Hard Carbon Anodes by Sealing Nanoporous Particles With Semi‐Permeable Coatings
N2 - A core-shell strategy is introduced to overcome the dilemma of common non-graphitic hard carbon anodes, linking high reversible storage capacity to practically unacceptable irreversible losses in the first cycle(s). Just as Graphite homogeneously combines effective lithium storage with an electrolyte solvent-sieving function, we show that both of these functions could be strategically integrated into non-graphitic carbons in a heterogeneous structure. Highly porous activated carbons are sealed by kinetically tuned gas-phase deposition of non-graphitic carbon to form a functional core-shell structure. Gas sorption porosimetry on core, shell, core–shell, and cracked core-shell particles confirms preserved core porosity and a semi-permeable shell. Diethyl carbonate sorption analysis is introduced as a more suitable probe than N2 or CO2 sorption, linking first-cycle losses to the liquid–solid interface of carbon anodes. The functional core-shell particles with much reduced diethyl carbonate uptake allow for high storage capacity and reduced first cycle losses. Delivering 400 ± 24 mAh g−1 with 82 ± 2% first-cycle reversibility, it is shown that three-stage Na storage in designed core-shell anodes can compensate for the larger size of sodium compared to lithium stored in graphite anodes (372 mAh g−1). The designed core-shell anodes show state-of-the-art performance with commercial promise.
KW - Sodium-ion battery
KW - Activated carbon
KW - Core-shell
KW - Hard carbon anode
KW - Diethyl carbonate vapor sorption
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655346
DO - https://doi.org/10.1002/anie.202519457
SN - 1433-7851
N1 - Es gibt eine parallele Sprachausgabe (deutsch), ein Link befindet sich im Feld zugehöriger Identifikator - There is a parallel language edition (German), a link is in the field related identifier
SP - 1
EP - 9
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-65534
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ferrari, Bruno
A1 - Fantin, Andrea
A1 - Said, D.
A1 - Fitch, A. N.
A1 - Suárez Ocano, Patricia
A1 - Mishurova, Tatiana
A1 - Roveda, Ilaria
A1 - Kromm, Arne
A1 - Darvishi Kamachali, Reza
A1 - Bruno, Giovanni
A1 - Evans, Alexander
A1 - Requena, G.
A1 - Agudo Jácome, Leonardo
A1 - Serrano Munoz, Itziar
T1 - The impact of scanning strategy on cell structures in PBF-LB/M/IN718: an in situ synchrotron x-ray diffraction study
N2 - In additive manufacturing, any change of the process parameters, such as scanning strategy, directly affects the cooling rates, heat accumulation, and overall thermal history of the build. Consequently, parts built with different process parameters tend to have different levels of crystallographic texture, residual stress, and dislocation density. These features can influence the properties of the material and their development during post-processing operations. In this study, IN718 prisms were built by laser powder bed fusion (PBF-LB/M) using two different scanning strategies (continuous 67° rotations around the build direction, ROT, and alternating 0°/67° scans, ALT) to provide two different as-built conditions. In situ time-resolved synchrotron diffraction was performed during a solution heat treatment at 1027 °C for 1 h. Ex situ scanning electron microscopy was used to support and complement the in situ observations. An approach to quantify the effect of elemental microsegregation at the cell walls is developed based on the deconvolution of asymmetric γ-nickel matrix peaks. Following this approach, the scanning strategies are shown to affect the as-built fraction of cell walls in the material, resulting in a difference of approximately 5 %, in weight fraction, between ROT and ALT (19 % vs. 24 %, respectively). This microsegregation was observed to be rapidly homogenized during the heating ramp, and no significant changes to the peak shape in the γ peaks occurred during the isothermal part of the heat treatment, regardless of the scanning strategy.
KW - Additive manufacturing
KW - Inconel 718
KW - Synchrotron x-ray diffraction
KW - Heat treatment
KW - Laser powder bed fusion
KW - Cellular microstructure
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650958
DO - https://doi.org/10.1016/j.jmrt.2025.11.214
SN - 2238-7854
VL - 41
SP - 593
EP - 608
PB - Elsevier B.V.
AN - OPUS4-65095
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rossi, Andrea
A1 - Corrao, Elena
A1 - Alladio, Eugenio
A1 - Drobne, Damjana
A1 - Hodoroaba, Vasile-Dan
A1 - Jurkschat, Kerstin
A1 - Kononenko, Veno
A1 - Madbouly, Loay Akmal
A1 - Mrkwitschka, Paul
A1 - Yasamin, Nakhli
A1 - Novak, Sara
A1 - Radnik, Jörg
A1 - Saje, Špela
A1 - Santalucia, Rosangela
A1 - Sordello, Fabrizio
A1 - Pellegrino, Francesco
T1 - Multivariate optimization and characterization of graphene oxide via design of experiments and chemometric analysis
N2 - Controlling the structure and properties of graphene oxide (GO) remains a challenge due to the poor reproducibility of conventional synthetic protocols and limited understanding of parameter-property relationships. In this study, we present an integrated analytical framework that combines Design of Experiments (DoE) with chemometric modelling to systematically assess the effects of eight synthesis variables on GO’s physicochemical and functional features. A Plackett–Burman experimental design enabled efficient screening of synthesis conditions, while comprehensive characterization (spanning UV–Vis spectroscopy, XPS, SEM–EDX, TEM–EDX, and XRD) was coupled with multivariate tools (Principal Component Analysis and Multiple Linear Regression) to identify statistically significant correlations between synthetic inputs and material responses. Notably, we demonstrate that UV–Vis spectra can serve as a robust proxy for oxidation state, offering a rapid and accessible alternative to surface-sensitive methods. The approach yields a predictive analytical toolkit for guiding GO synthesis and highlights a generalizable strategy for the rational design of flat nanomaterials. This work supports reproducible, resource-efficient material development aligned with Safe and Sustainable by Design (SSbD) principles.
KW - Graphene oxide
KW - 2D-materials
KW - Design of Experiment
KW - Synthesis
KW - Chemometric analysis
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-652576
DO - https://doi.org/10.1016/j.flatc.2025.100988
SN - 2452-2627
VL - 55
SP - 1
EP - 9
PB - Elsevier B.V.
AN - OPUS4-65257
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Mantouvalou, I.
A1 - Bauer, L.J.
A1 - Truong, V.-B.
A1 - Wagener, Y.
A1 - Förste, F.
A1 - Maruchenko, O.
A1 - Werner, S.
A1 - Lizzi, F.
A1 - Wieder, Frank
A1 - Wolff, T.
A1 - Kanngießer, B.
A1 - Zaslansky, P.
T1 - Quantitative micro-XRF combined with X-ray imaging reveals correlations between Zn concentration and dentin tubule porosity across entire teeth
N2 - Bony materials are biogenic composites of protein fibers and mineral that create hierarchical structures. In the case of teeth, dentin is the main component and similar to other bones, it contains porosity at multiple length scales. It is traversed by micron-sized hollow channels known as dentinal tubules, essential for temperature and pain sensation. Tubule density and thus porosity vary throughout the macroscopic three-dimensional (3D) structure, with porosity increasing toward the pulp. The different densities in teeth are easily revealed non-destructively in 3D by X-ray imaging using computer tomography (CT). Yet elemental composition analysis is more difficult to obtain from within the centimeter-sized heterogeneous bulk material. We describe an approach of merging CT measurements of healthy, intact bovine teeth with micro-X-ray fluorescence (micro-XRF) images of matching serially sectioned slices. Through the combination of multi-resolution quantitative CT measurements with elemental mass fraction derivation, gradients in density and element distributions such as calcium (Ca), phosphorus (P), and zinc (Zn) are revealed across entire teeth in 3D. While the main constituents (Ca and P) are homogeneously distributed in the matrix, Zn concentration increases significantly and exponentially toward the pulp. We find an inverse association between dentin tissue density and Zn concentration localizing this element in or around tubules. Our data serve as a quantitative reference for density and Zn mass fractions in healthy, neither carious nor hypermineralized dentin, as a basis for comparisons across species in health and disease states.
KW - Dentin density
KW - Micro-computer tomography
KW - Quantitative micro-X-ray fluorescence
KW - Tubule porosity
KW - Zn distribution
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654215
DO - https://doi.org/10.1002/VIW.20250173
SN - 2688-3988
SN - 2688-268X
SP - 1
EP - 14
PB - Wiley Online Library
AN - OPUS4-65421
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kanaris, Orestis
A1 - Sobisch, Lydia-Yasmin
A1 - Gödt, Annett
A1 - Schreiber, Frank
A1 - Nordholt, Niclas
T1 - Consequences of benzalkonium chloride tolerance for selection dynamics and de novo resistance evolution driven by antibiotics
N2 - Biocides are used in large amounts in industrial, medical, and domestic settings. Benzalkonium chloride (BAC) is a commonly used biocide, for which previous research revealed that Escherichia coli can rapidly adapt to tolerate BAC-disinfection, with consequences for antibiotic susceptibility. However, the consequences of BAC tolerance for selection dynamics and resistance evolution to antibiotics remain unknown. Here, we investigated the effect of BAC tolerance in E. coli on its response upon challenge with different antibiotics. Competition assays showed that subinhibitory concentrations of ciprofloxacin—but not ampicillin, colistin and gentamicin—select for the BAC-tolerant strain over the BAC-sensitive ancestor at a minimal selective concentration of 0.0013–0.0022 µg/mL. In contrast, the BAC-sensitive ancestor was more likely to evolve resistance to ciprofloxacin, colistin and gentamicin than the BAC-tolerant strain when adapted to higher concentrations of antibiotics in a serial transfer laboratory evolution experiment. The observed difference in the evolvability of resistance to ciprofloxacin was partly explained by an epistatic interaction between the mutations conferring BAC tolerance and a knockout mutation in ompF encoding for the outer membrane porin F. Taken together, these findings suggest that BAC tolerance can be stabilized in environments containing low concentrations of ciprofloxacin, while it also constrains evolutionary pathways towards antibiotic resistance.
KW - AMR
KW - Resistance evolution
KW - Resistance selection
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653842
DO - https://doi.org/10.1038/s44259-025-00170-8
SN - 2731-8745
VL - 4
IS - 1
SP - 1
EP - 13
PB - Springer Science and Business Media LLC
AN - OPUS4-65384
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Schönsee, Eric
A1 - Hüsken, Götz
A1 - Kocherla, Amarteja
A1 - Strangfeld, Christoph
T1 - Influences of Surface Properties on the Reflection Intensity - Towards in Situ Monitoring During Early Age Hydration of CEM I
N2 - Interlayer bonding in 3D concrete printing is influenced by the hydration progress and surface moisture of the previously printed layer. For effective quality control, continuous in situ monitoring of interlayer surface properties is required. This study investigated reflection intensity as a method for in situ measurements during the hydration of CEM I mixtures with varying retarder contents. Additional factors influencing the reflection intensity are also examined. Two laser line scanners with different wavelengths were used to track hydration over 72 h. Vicat tests and isothermal calorimetry served as reference methods. Across all the mixtures, the reflection intensity exhibited a repeatable pattern with five different stages. A sharp increase in intensity during the third stage was consistent with the acceleration period of hydration. These findings suggest that reflection intensity measurements could serve as a promising tool for evaluating interlayer bonding in 3D concrete printing.
KW - In situ hydration monitoring
KW - Cement
KW - Optical methods
KW - Reflection intensity
KW - Additive manufacturing
KW - Isothermal calorimetry
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653430
DO - https://doi.org/10.1007/s10921-025-01326-2
SN - 1573-4862
VL - 45
IS - 1
SP - 1
EP - 17
PB - Springer Nature
AN - OPUS4-65343
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wagner, Jan
A1 - Häfner, P.
A1 - Reimann, H.-A.
A1 - Schartel, Bernhard
T1 - Valorization of Natural Fibers in Flame Retarded Poly(lactic acid)
N2 - Extensive research has explored natural fiber reinforced composites, typically focusing on a single fiber within a polymer matrix. Comprehensive comparisons across different natural fibers in the same polymer, which are critical for industrial material selection, remain limited. This work presents a systematic comparison of untreated hemp, flax, and sisal fibers incorporated at varying fiber lengths and loadings into flame retarded poly(lactic acid) (PLA). Fire behavior, thermal, and mechanical responses were investigated through thermogravimetry, UL 94, and cone calorimetry, alongside crystallinity, molecular weight (MW), and microstructural analysis. Fiber incorporation reduced the peak heat release rate (pHRR) by up to 30 % in 30 wt% hemp, attributed to protective layer formation, but increased flammability in UL 94. A phytic acid melamine salt combined with expandable graphite and 20 wt% hemp produced incomplete combustion at 50 kW/m², raising char residue from 4 to 24 wt% and halving pHRR. Petrella plots revealed that fiber addition alone lowered fire load and flashover propensity as effectively as phytic acid melamine; with hemp, phytic acid and expendable graphite, the flashover hazard and fire load were halved. MW was preserved while crystallinity and modulus increased with fiber content. Hemp delivered the most consistent reinforcement, while optimized processing enabled flax and sisal to improve stiffness. Performance gains were strongest when individual fibers were dispersed via optimized processing, preventing bundle fracture under load. Plasma modification of the fibers improved the maximum tensile strength in the composites. A practical guide is provided for valorizing natural fibers in PLA composites, demonstrating routes to bio-based, compostable materials with improved fire safety and mechanical performance suitable for industrial processing.
KW - Poly(lactic acid)
KW - Hemp
KW - Sisal
KW - Flax
KW - Flame retardant
KW - Phytic acid
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653038
DO - https://doi.org/10.1016/j.mtcomm.2025.114575
SN - 2352-4928
VL - 50
SP - 1
EP - 41
PB - Elsevier Ltd.
AN - OPUS4-65303
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Cairns, Warren R. L.
A1 - Braysher, Emma C.
A1 - Butler, Owen T.
A1 - Cavoura, Olga
A1 - Davidson, Christine M.
A1 - Todoli Torro, Jose Luis
A1 - von der Au, Marcus
T1 - Atomic spectrometry update: review of advances in environmental analysis
N2 - This review covers advances in the analysis of air, water, plants, soils and geological materials by a range of atomic spectrometric techniques including atomic emission, absorption, fluorescence and mass spectrometry.
KW - Environmental analysis
KW - Review
KW - Trend Article
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653977
DO - https://doi.org/10.1039/D5JA90058A
SN - 0267-9477
VL - 41
IS - 1
SP - 16
EP - 70
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-65397
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Onyenso, Gabriel
A1 - AI-Zawity, Jiwar
A1 - Farahbakhsh, Nastaran
A1 - Schardt, Annika
A1 - Yadigarli, Aydan
A1 - Vakamulla Raghu, Swathi Naidu
A1 - Engelhard, Carsten
A1 - Müller, Mareike
A1 - Schönherr, Holger
A1 - Killian, Manuela S.
T1 - Novel Ag-modified zirconia nanomaterials with antibacterial activity
N2 - The outcome of an implant procedure largely depends on the implant's surface properties. Biomaterials are now designed to have surfaces with multifunctionality, such as favorable tissue integration and the ability to combat bacterial adhesion and colonization. Herein, we report on a simple approach to improve the antibacterial properties of zirconia nanotubes (ZrNTs) coatings by decorating with silver nanoparticles (AgNP), achieved through electrochemical anodization of a zirconium–silver alloy (Zr–Ag). The AgNPs were shown to partially consist of Ag2O, potentially enhancing the availability of Ag+ ions for antibacterial activity. The modified ZrNTs were characterized using SEM, EDS, ToF-SIMS, and XPS to determine their structural morphology and chemical composition, and were further subjected to antibacterial testing. The silver and zirconium ion release behavior was monitored via ICP-MS. ZrNTs decorated with AgNP exhibit strong antimicrobial activity (>99% bacterial killing) against both S. aureus and E. coli. Antimicrobial tests indicate that the antibacterial activity against the Gram-positive pathogen S. aureus was improved by a factor of 100 compared to unmodified ZrNTs, while unmodified ZrNTs already showed a comparable reduction of viable Gram-negative E. coli. This strategy illustrates a straightforward and effective modification that optimizes the interface between the host environment and the biomaterial surface to meet the very important criteria of biocompatibility and active antibacterial response.
KW - Mass Spectrometry
KW - Nanoparticles
KW - Advanced Materials
KW - ICP-MS
KW - Antimicrobial material
KW - ToF-SIMS
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653990
DO - https://doi.org/10.1039/d5ra07099f
SN - 2046-2069
VL - 16
IS - 3
SP - 2286
EP - 2297
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-65399
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -