TY - JOUR
A1 - Kalot, G.
A1 - Godard, A.
A1 - Busser, B.
A1 - Pliquett, J.
A1 - Broekgaarden, M.
A1 - Motto-Ros, V.
A1 - Wegner, Karl David
A1 - Resch-Genger, Ute
A1 - Köster, U.
A1 - Denat, F.
A1 - Coll, J.-L.
A1 - Bodio, E.
A1 - Goze, C.
A1 - Sancey, L.
T1 - Aza-BODIPY: A New Vector for Enhanced Theranostic Boron Neutron Capture Therapy Applications
N2 - Boron neutron capture therapy (BNCT) is a radiotherapeutic modality based on the nuclear capture of slow neutrons by stable 10B atoms followed by charged particle Emission that inducing extensive damage on a very localized level (<10 um). To be effcient, a suffcient amount of 10B should accumulate in the tumor area while being almost cleared from the normal surroundings. A water-soluble aza-boron-dipyrromethene dyes (BODIPY) fluorophore was reported to strongly accumulate in the tumor area with high and BNCT compatible Tumor/Healthy Tissue ratios.
The clinically used 10B-BSH (sodium borocaptate) was coupled to the water-soluble aza-BODIPY platform for enhanced 10B-BSH tumor vectorization. We demonstrated a strong uptake of the compound in tumor cells and determined its biodistribution in mice-bearing tumors. A model of chorioallantoic membrane-bearing glioblastoma xenograft was developed to evidence the BNCT potential of such compound, by subjecting it to slow neutrons. We demonstrated the Tumor accumulation of the compound in real-time using optical imaging and ex vivo using elemental imaging based on laser-induced breakdown spectroscopy. The tumor growth was significantly reduced as compared to BNCT with 10B-BSH. Altogether, the fluorescent aza-BODIPY/10B-BSH compound is able to vectorize and image the 10B-BSH in the tumor area, increasing its theranostic potential for effcient approach of BNCT.
KW - Aza-BODIPY
KW - SWIR
KW - NIR-I
KW - Theranostic
KW - Boron compound
KW - Optical imaging
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-512280
DO - https://doi.org/10.3390/cells9091953
VL - 9
IS - 9
SP - 1953
PB - MDPI
AN - OPUS4-51228
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kage, Daniel
A1 - Hoffmann, Katrin
A1 - Borcherding, H.
A1 - Schedler, U.
A1 - Resch-Genger, Ute
T1 - Lifetime encoding in flow cytometry for bead‑based sensing of biomolecular interaction
N2 - To demonstrate the potential of time-resolved flow cytometry (FCM) for bioanalysis, clinical diagnostics, and optically encoded bead-based assays, we performed a proof-of-principle study to detect biomolecular interactions utilizing fluorescence lifetime (LT)-encoded micron-sized polymer beads bearing target-specific bioligands and a recently developed prototype lifetime flow cytometer (LT-FCM setup). This instrument is equipped with a single excitation light source and different fluorescence detectors, one operated in the photon-counting mode for time-resolved measurements of fluorescence decays and three detectors for conventional intensity measurements in different spectral windows. First, discrimination of bead-bound biomolecules was demonstrated in the time domain exemplarily for two targets, Streptavidin (SAv) and the tumor marker human chorionic gonadotropin (HCG). In a second step, the determination of biomolecule concentration levels was addressed representatively for the inflammation-related biomarker tumor necrosis factor (TNF-α) utilizing fluorescence intensity measurements in a second channel of the LT-FCM instrument. Our results underline the applicability of LT-FCM in the time domain for measurements of biomolecular interactions in suspension assays. In the future, the combination of spectral and LT encoding and multiplexing and the expansion of the time scale from the lower nanosecond range to the longer nanosecond and the microsecond region is expected to provide many distinguishable codes. This enables an increasing degree of multiplexing which could be attractive for high throughput screening applications.
KW - Fluorescence
KW - Sensor
KW - Assay
KW - Protein
KW - Multiplexing
KW - Flow cytometry
KW - Barcoding
KW - Lifetime
KW - Dye
KW - Bead
KW - Bead-based assay
KW - Method
KW - Quantification
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-516007
DO - https://doi.org/10.1038/s41598-020-76150-x
VL - 10
IS - 1
SP - 19477
PB - Nature
AN - OPUS4-51600
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hoffmann, Katrin
A1 - Nirmalananthan-Budau, Nithiya
A1 - Resch-Genger, Ute
T1 - Fluorescence calibration standards made from broadband emitters encapsulated in polymer beads for fluorescence microscopy and flow cytometry
N2 - We present here the design and characterization of a set of spectral calibration beads. These calibration beads are intended for the determination and regular control of the spectral characteristics of fluorescence microscopes and other fluorescence measuring devices for the readout of bead-based assays. This set consists of micrometer-sized polymer beads loaded with dyes from the liquid Calibration Kit Spectral Fluorescence Standards developed and certified by BAM for the wavelength-dependent Determination of the spectral responsivity of fluorescencemeasuring devices like spectrofluorometers. To cover the wavelength Region from 400 to 800 nm, two new near-infrared emissive dyes were included, which were spectroscopically characterized in solution and encapsulated in the beads. The resulting set of beads presents the first step towards a new platform of spectral calibration beads for the determination of the spectral characteristics of fluorescence instruments like fluorescence microscopes, FCM setups, and microtiter plate readers, thereby meeting the increasing demand for reliable and comparable fluorescence data especially in strongly regulated areas, e.g., medical diagnostics. This will eventually provide the basis for standardized calibration procedures for imaging systems as an alternative to microchannel slides containing dye solutions previously reported by us.
KW - Fluorescence standard
KW - Fluorescence
KW - Dye
KW - Microscopy
KW - Bead
KW - Particle
KW - NIR
KW - calibration
KW - Quality assurance
KW - Traceability
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-508117
DO - https://doi.org/10.1007/s00216-020-02664-y
SN - 1618-2642
VL - 412
IS - 24
SP - 6499
EP - 6507
PB - Springer
AN - OPUS4-50811
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rietsch, P.
A1 - Sobottka, S.
A1 - Hoffmann, K.
A1 - Popov, A. A.
A1 - Hildebrandt, P.
A1 - Sarkar, B.
A1 - Resch-Genger, Ute
A1 - Eigler, S.
T1 - Between Aromatic and Quinoid Structure: A Symmetrical UV to Vis/NIR Benzothiadiazole Redox Switch
N2 - Reversibly switching the light absorption of organic molecules by redox processes is of interest for applications in sensors, light harvesting, smart materials, and medical diagnostics. This work presents a symmetrical benzothiadiazole (BTD) derivative with a high fluorescence quantum yield in solution and in the crystalline state and shows by spectroelectrochemical analysis that reversible switching of UV absorption in the neutral state, to broadband Vis/NIR absorption in the 1st oxidized state, to sharp band Vis absorption in the 2nd oxidized state, is possible.
For the one-electron oxidized species, formation of a delocalized radical is confirmed by electron paramagnetic resonance spectroelectrochemistry. Furthermore, our results reveal an increasing quinoidal distortion upon the 1st and 2nd oxidation, which can be used as the leitmotif for the development of BTD based redox switches.
KW - Dye
KW - Electrochemistry
KW - Switch
KW - Redox
KW - Sensor
KW - Photophysics
KW - Quantum yield
KW - photoluminescence
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517222
DO - https://doi.org/10.1002/chem.202004009
VL - 26
IS - 72
SP - 17361
EP - 17365
PB - Wiley-VCH GmbH
AN - OPUS4-51722
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Srivastava, Priyanka
A1 - Fürstenwerth, Paul Christian
A1 - Witte, J. F.
A1 - Resch-Genger, Ute
T1 - Synthesis and spectroscopic characterization of a fluorescent phenanthrene-rhodamine dyad for ratiometric measurements of acid pH values
N2 - We present the rational design, synthesis and spectroscopic characterization of a novel dual excitation, three color emitting, pH-responsive fluorescent probe consisting of two phenanthrene and one rhodamine B units linked by click chemistry. The rhodamine moiety, excitable at λEx = 315 nm and at λEx = 560 nm in its ring-opened form, provides the pH-responsive fluorophore, while the pH-insensitive phenanthrene, excited at λEx = 315 nm, serves as inert internal reference, The presence of two phenanthrene moieties enables a blue monomer and a blueish green excimer emission at 351 nm and 500 nm, respectively. Opening of the rhodamine B spirolactam ring at an acidic pH below 5.0 (pKa = 2.59 ± 0.04) switches on its emission at 580 nm. Simultaneously, the phenanthrene excimer emission decreases caused by a change in orientation of the phenanthrene units, while the monomer emission is barely affected. This sensor design enables ratiometric measurements in the low acidic pH range utilizing the intensity ratios of the rhodamine B and phenanthrene excimer emission at 580 nm and 500 nm. Alternatively, also the intensity ratios of the rhodamine B and the phenanthrene monomer emission could be exploited or the sum of the phenanthrene monomer and excimer fluorescence. To the best of our knowledge, this is the first report of ratiometric sensing utilizing such a versatile type of tricolor emissive dyad probe bearing phenanthrene moieties and showing phenanthrene monomer and excimer emission.
KW - Fluorescence
KW - Optical probe
KW - Sensor
KW - Dye
KW - Rhodamine
KW - Synthesis
KW - Photophysics
KW - PH
KW - Quantum yield
KW - Quality assurance
KW - Mechanism
KW - Chemodosimeter
KW - Phenanthrene
KW - Ratiometric
KW - Dyad
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530554
DO - https://doi.org/10.1039/d1nj01573g
SN - 1144-0546
VL - 45
IS - 31
SP - 13755
EP - 13762
PB - Royal Society of Chemistry
AN - OPUS4-53055
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tavernaro, Isabella
A1 - Simon, Fabian
A1 - Gehrenkemper, Lennart
A1 - Tobias, Charlie
A1 - Resch-Genger, Ute
A1 - Meermann, Björn
T1 - Quantification of the amount of surface groups of aminated silica nano- and microparticles utilizing a fluorine tag and HR-CS-GFMAS
N2 - The performance, bioavailability, and safe use of engineered nanomaterials (NMs) depends not only on properties such as size, shape, and surface area, but largely on surface chemistry. While many sizing methods have been established, there is still a lack of validated screening methods for determining NM surface functional groups (FGs). In this context, we present a fast and simple method for FG quantification using high resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) and assess its applicability for the surface analysis of representatively chosen aminated silica nanoparticles (NPs) and microparticles (MPs) in conjunction with amino FG labeling with a fluorine tag. For this proof-of-concept study, first surface amino FG screening of the silica NPs and MPs was done with a potentiometric back titration method, providing the total amount of protonatable surface FGs, and two optical assays relying on reporter dyes with sizes and spatial requirements, i.e., surface binding areas smaller or larger than that of the fluorine tag to estimate the maximum and reporter-accessible number of amino FGs. Subsequently, the surface amino FGs were labeled with the fluorine tag 4-(trifluoromethyl)benzoic acid (TFMB) and the amount of fluorine originating from the bound TFMB molecules was quantified by HR-CS-GFMAS in two common organic solvents, i.e., dimethyl sulfoxide (DMSO) or ethanol (EtOH) to assess possible interferences from organic matrices. Our study revealed limits of detection (LODs) and quantification (LOQs) for fluorine of 1.0 µg/L and 3.5 µg/L in EtOH and 1.5 µg/L and 5.0 µg/L in DMSO, respectively. Overall, a quick and simple method for analyzing surface FGs on NPs and MPs was presented utilizing broadly available fluorine tags and HR-CS-GFMAS for fluorine quantification, which can be applied, e.g., for homogeneity, stability, and aging studies of surface-modified particles. This could contribute to ease the understanding of property-safety relationships for surface-functionalized NMs.
KW - Fluorine Analysis
KW - Nano- and microparticles
KW - Surface group quantification
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-641965
DO - https://doi.org/10.1007/s00216-025-06107-4
SN - 1618-2642
SP - 1
EP - 11
PB - Springer Science and Business Media LLC
CY - Berlin ; Heidelberg
AN - OPUS4-64196
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kuner, Maximilian
A1 - Kühn, S.
A1 - Haase, H.
A1 - Meyer, Klas
A1 - Koch, Matthias
T1 - Cleaving Ergot Alkaloids by Hydrazinolysis - A Promising Approach for a Sum Parameter Screening Method
N2 - Ergot alkaloids are mycotoxins formed by fungi of the Claviceps genus, which are some of the most common contaminants of food and feed worldwide. These toxins are a structurally heterogeneous group of compounds, sharing an ergoline backbone. Six structures and their corresponding stereoisomers are typically quantified by either HPLC-FLD or HPLC-MS/MS and the values subsequently summed up to determine the total ergot alkaloid content. For the development of a screening method targeting all ergot alkaloids simultaneously, the alkaloids need to be transferred to one homogeneous structure: a lysergic acid derivative. In this study, two promising cleaving methods—acidic esterification and hydrazinolysis—are compared, using dihydroergocristine as a model compound. While the acidic esterification proved to be unsuitable, due to long reaction times and oxidation sensitivity, hydrazinolysis reached a quantitative yield in 40-60 min. Parallel workup of several samples is possible. An increasing effect on the reaction rate by the addition of ammonium iodide was demonstrated. Application of hydrazinolysis to a major ergot alkaloid mix solution showed that all ergopeptines were cleaved, but ergometrine/-inine was barely affected. Still, hydrazinolysis is a suitable tool for the development of a sum parameter screening method for ergot alkaloids in food and feed.
KW - Ergot alkaloids
KW - Sum parameter method
KW - Hydrazinolysis
KW - Esterification
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527508
DO - https://doi.org/10.3390/toxins13050342
VL - 13
IS - 5
SP - 342
PB - MDPI
CY - Basel, Switzerland
AN - OPUS4-52750
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wasternack, J.
A1 - Schröder, H. V.
A1 - Witte, J. F.
A1 - Ilisson, M.
A1 - Hupatz, H.
A1 - Hille, J. F.
A1 - Gaedke, M.
A1 - Valkonen, A. M.
A1 - Sobottka, S.
A1 - Krappe, A.
A1 - Schubert, M.
A1 - Paulus, B.
A1 - Rissanen, K.
A1 - Sarkar, B.
A1 - Eigler, S.
A1 - Resch-Genger, Ute
A1 - Schalley, C. A.
T1 - Switchable protection and exposure of a sensitive squaraine dye within a redox active rotaxane
N2 - In nature,molecular environments in proteins can sterically protect and stabilize reactive species such as organic radicals through non-covalent interactions.Here, wereport a near-infrared fluorescent rotaxane in which the stabilization of a chemically labile squaraine fluorophore by the coordination of a tetralactam macrocycle can be controlled chemically and electrochemically. The rotaxane can be switched between two co-conformations inwhich thewheel either stabilizes or exposes the fluorophore. Coordination by the wheel affects the squaraine’s stability across four redox states and renders the radical anion significantly more stable—by a factor of 6.7—than without protection by a mechanically bonded wheel. Furthermore, the fluorescence properties can be tuned by the redox reactions in a stepwise manner. Mechanically interlockedmolecules provide an excellent scaffold to stabilize and selectively expose reactive species in a co-conformational switching process controlled by external stimuli.
KW - Fluorescence
KW - Dye
KW - Sensor
KW - Quantum yield
KW - Spectroscopy
KW - Photophysics
KW - Synthesis
KW - Squaraine
KW - Switch
KW - Redox-active
KW - Rotaxane
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614959
DO - https://doi.org/10.1038/s42004-024-01312-1
VL - 7
SP - 1
EP - 11
AN - OPUS4-61495
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scharek, Vera M.
A1 - Kröger, Tommy
A1 - Keil, Karin
A1 - Traub, Heike
A1 - Meermann, Björn
T1 - A new elemental analytical approach for microplastic sum parameter analysis—ETV/ICP-MS with CO2
N2 - Microplastics (MPs) are pervasive environmental pollutants and are considered one of the main challenges of our time. However, a fast and comprehensive analytical approach for MP analysis in complex matrices traceable to SI units is still lacking. In this context, we report a fast screening tool for the sum parameter analysis of MPs using electrothermal vaporization (ETV) coupled to inductively coupled plasma-mass spectrometry (ICP-MS). In our proof-of-concept study, we observed size-independent detection of MPs as peaks above the 13C+ signal background in the nano- to micrometer range without limitations regarding the polymer type. Quantification of the 13C+ MP signals was accomplished via an external gas calibration utilizing dynamic dilution of carbon dioxide with argon, yielding recovery rates of 80–96% for MP reference material (RM) of polymer types commonly found in the environment. The applicability to a soil sample was demonstrated through spiking experiments with a polyethylene (PE) MP RM in soil. The limit of detection (LOD) was estimated to be 0.13 µg C, equaling the detection of a single spherical low-density-PE particle of about 70 µm, and a limit of quantification (LOQ) of 0.42 µg C.
KW - ETV/ICP-MS
KW - Mikroplastik
KW - Summenparameter
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-646418
DO - https://doi.org/10.1007/s00216-025-06146-x
SN - 1618-2642
SP - 1
EP - 10
PB - Springer
CY - Berlin ; Heidelberg
AN - OPUS4-64641
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bayerl, C.
A1 - Shahryari, M.
A1 - Reiter, R.
A1 - Proß, V.
A1 - Lehmann, K.
A1 - Kühl, A. A.
A1 - Becker, Dorit
A1 - Schulz, Andreas
A1 - Infante Duarte, C.
A1 - Taupitz, M.
A1 - Geisel, D.
A1 - Tzschätzsch, H.
A1 - Saatz, Jessica
A1 - Traub, Heike
A1 - Asbach, P.
T1 - Quantitative Analysis of Gadolinium Deposits in Liver Tissue of Patients After Single or Multiple Gadolinium-based Contrast Agent Application
N2 - Gadolinium-based contrast agents (GBCAs) are widely used in magnetic resonance imaging. Concerns exist regarding gadolinium deposition and its potential histopathologic tissue alterations, especially after repeated administrations of linear, less stable GBCAs. This study aimed to quantify gadolinium mass fractions in liver specimens of subjects exposed to GBCAs in correlation with histopathologic features.
In this study, mass fractions of gadolinium in human liver specimens from 25 subjects who underwent liver tumor resection surgery and had received GBCA (1 to 9 times over 4 years), were quantitatively analyzed using inductively coupled plasma–mass spectrometry (ICP-MS). Histomorphology was assessed based on the nonalcoholic fatty liver disease activity score (NAS).
Our results suggest that after intravenous administration of GBCA, a small fraction of gadolinium is retained in the liver over a time period of at least several weeks. A relationship was observed between Gadolinium retention and the number of GBCA administrations, but not with the cumulative dose and the degree of fatty liver disease.
KW - ICP-MS
KW - Contrast agent
KW - Gadolinium
KW - Liver
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-646608
DO - https://doi.org/10.1097/RLI.0000000000001254
SN - 1536-0210
SP - 1
EP - 10
PB - Lippincott Williams & Wilkins
CY - Philadelphia, Pa.
AN - OPUS4-64660
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Lozano-Martín, Daniel
A1 - Tuma, Dirk
A1 - Chamorro, César R.
T1 - Evaluation of Reference Equations of State for Density Prediction in Regasified LNG Mixtures Using High-Precision Experimental Data
N2 - This study evaluates the performance of three reference equations of state (EoS), AGA8-DC92, GERG-2008, and SGERG-88, in predicting the density of regasified liquefied natural gas (RLNG) mixtures. A synthetic nine-component RLNG mixture was gravimetrically prepared. High-precision density measurements were obtained using a single-sinker magnetic suspension densimeter over a temperature range of (250 to 350) K and pressures up to 20 MPa. The experimental data were compared with EoS predictions to evaluate their accuracy. AGA8-DC92 and GERG-2008 showed excellent agreement with the experimental data, with deviations within their stated uncertainty. In contrast, SGERG-88 exhibited significantly larger deviations for this RLNG mixture, particularly at low temperatures of (250 to 260) K, where discrepancies reached up to 3 %. Even at 300 K, deviations larger than 0.4 % were observed at high pressures, within the model’s uncertainty, but notably higher than those of the other two EoSs. The analysis was extended to three conventional 11-component natural gas mixtures (labeled G420 NG, G431 NG, and G432 NG), previously studied by our group using the same methodology. While SGERG-88 showed reduced accuracy for the RLNG mixture, it performed reasonably well for these three mixtures, despite two of them have a very similar composition to the RLNG. This discrepancy is attributed to the lower CO2 and N2 content typical in RLNG mixtures, demonstrating the sensitivity of EoS performance to minor differences in composition. These findings highlight the importance of selecting appropriate EoS models for accurate density prediction in RLNG applications.
KW - Regasified LNG
KW - Equation of state
KW - Density
KW - Gravimetric preparation
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-646506
DO - https://doi.org/10.1007/s10765-025-03669-4
SN - 0195-928X
VL - 46
SP - 1
EP - 25
PB - Springer Science and Business Media LLC
CY - Heidelberg
AN - OPUS4-64650
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Krahl, T.
A1 - Beer, F.
A1 - Relling, A.
A1 - Gawlitza, Kornelia
A1 - Rurack, Knut
A1 - Kemnitz, E.
T1 - Toward Luminescent Composites by Phase Transfer of SrF2 :Eu3+ Nanoparticles Capped with Hydrophobic Antenna Ligands
N2 - Transparent dispersions of hydrophobic SrF2 :Eu3+ nanoparticles in cyclohexane with up to 20% europium were obtained by fluorolytic sol-gel synthesis followed by Phase transfer into cyclohexane through capping with sodium dodecylbenzenesulfonate (SDBS). The particles were characterized by TEM, XRD and DLS as spherical objects with a diameter between 6 and 11 nm in dry state. 1H-13CP MAS NMR experiments revealed the binding of the anionic sulfonate head group to the particle surface. The particles show bright red luminescence upon excitation of the aromatic capping agents, acting as antennas for an Energy transfer from the benzenesulfonate unit to the Eu3+ centers in the particles. This synthesis method overcomes the current obstacle of the fluorolytic sol-gel synthesis that transparent dispersions can be obtained directly only in hydrophilic solvents. To demonstrate the potential of such hydrophobized alkaline-earth fluoride particles, transparent luminescent organic-inorganic composites with 10% SrF2 :Eu3+ embedded into polyTEGDMA, polyBMA, poly-BDDMA and polyD3MA, respectively, were prepared, endowing the polymers with the luminescence features of the nanoparticles.
KW - Nanoparticles
KW - Fluorides
KW - Sol-gel process
KW - Organic-inorganic hybrid composites
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-508668
DO - https://doi.org/10.1002/cnma.202000058
SP - 1
EP - 11
PB - Wiley
AN - OPUS4-50866
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tjaden, B.
A1 - Lisec, Jan
A1 - Schramm, A.
T1 - N-Myc-induced metabolic rewiring creates novel therapeutic vulnerabilities in neuroblastoma
N2 - N-Myc is a transcription factor that is aberrantly expressed in many tumor types and is often correlated with poor patient prognosis. Recently, several lines of evidence pointed to the fact that oncogenic activation of Myc family proteins is concomitant with reprogramming of tumor cells to cope with an enhanced need for metabolites during cell growth. These adaptions are driven by the ability of Myc proteins to act as transcriptional amplifiers in a tissue-of-origin specific manner. Here, we describe the effects of N-Myc overexpression on metabolic reprogramming in neuroblastoma cells. Ectopic expression of N-Myc induced a glycolytic switch that was concomitant with enhanced sensitivity towards 2-deoxyglucose, an inhibitor of glycolysis. Moreover, global metabolic profiling revealed extensive alterations in the cellular metabolome resulting from overexpression of N-Myc. Limited supply with either of the two main carbon sources, glucose or glutamine, resulted in distinct shifts in steady-state metabolite levels and significant changes in glutathione metabolism. Interestingly, interference with glutamine-glutamate conversion preferentially blocked proliferation of N-Myc overexpressing cells, when glutamine levels were reduced. Thus, our study uncovered N-Myc induction and nutrient levels as important metabolic master switches in neuroblastoma cells and identified critical nodes that restrict tumor cell proliferation.
KW - Mass-Spectrometry
KW - Cancer
KW - MYCN
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-507193
DO - https://doi.org/10.1038/s41598-020-64040-1
VL - 10
IS - 1
SP - 7157
AN - OPUS4-50719
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Climent Terol, Estela
A1 - Rurack, Knut
T1 - Streifenschnelltest mit ppt-Empfindlichkeit durch Kombination von Elektrochemilumineszenz-Detektion mit Aptamer-gesteuerter Indikatorfreisetzung aus mesoporösen Nanopartikeln
N2 - Die Kombination aus elektrogenerierter Chemilumineszenz (ECL) und Aptamer-gesteuerter Indikatorfreisetzung (gAID) aus magnetischen mesoporösen Silica-Nanopartikeln, die in mit Poly(ethylenglycol) und N-(3-Triethoxysilylpropyl) diethanolamin funktionalisiertes Glasfaserpapier eingebettet sind, ermöglichte die Entwicklung eines Schnelltests, mit dem sich Penicillin direkt in verdünnter Milch bis auf 50 +/- 9 ppt in <5 min nachweisen lässt. Die kovalente Bindung der Aptamer-Kappe an das Siliciumdioxid-Gerüst ermöglichte den Verschluss der Poren durch nicht-kovalente elektrostatische Wechselwirkungen mit Oberflächen-Aminogruppen. Die Bindung von Penicillin führte zu einer Faltung des Aptamers, wodurch der zuvor in das Material geladene ECL-Reporter Ru(bpy)32+ freigesetzt wurde und nach lateralem Fluss von einer Smartphone-Kamera nach elektrochemischer Anregung mit einer in einen 3D-gedruckten Halter eingesetzten Siebdruckelektrode detektiert wird. Der Ansatz ist einfach, generisch und bietet Vorteile hinsichtlich Empfindlichkeit, Messunsicherheit und Robustheit gegenüber konventioneller Fluoreszenz- oder elektrochemischer Detektion, insbesondere für Point-of-Need-Analysen anspruchsvoller Matrices und Analyten im Ultraspurenbereich.
KW - Schnelltests
KW - Elektrochemilumineszenz
KW - Aptamere
KW - Teststreifen
KW - Gesteuerte Freisetzung
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-540205
DO - https://doi.org/10.1002/ange.202110744
VL - 133
IS - 50
SP - 26491
EP - 26501
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-54020
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Smeir, E.
A1 - Leberer, S.
A1 - Blumrich, A.
A1 - Vogler, G.
A1 - Vasiliades, A.
A1 - Dresen, S.
A1 - Jaeger, Carsten
A1 - Gloaguen, Y.
A1 - Klose, C.
A1 - Beule, D.
A1 - Schulze, P.
A1 - Bodmer, R.
A1 - Foryst-Ludwig, A.
A1 - Kintscher, U.
T1 - Depletion of Cardiac Cardiolipin Synthase Alters Systolic and Diastolic Function
N2 - Cardiolipin (CL) is a major cardiac mitochondrial phospholipid maintaining regular mitochondrial morphology and function in cardiomyocytes. Cardiac CL production includes ist biosynthesis and a CL-remodeling process. Here we studied the impact of CL-biosynthesis and the enzyme Cardiolipin Synthase (CLS) on cardiac function.
CLS and cardiac CL-species were significantly downregulated in cardiomyocytes following catecholamine-induced cardiac damage in mice, accompanied by increased oxygen consumption rates, signs of oxidative stress and mitochondrial uncoupling. RNAi-mediated cardiomyocyte-specific knockdown of CLS in Drosophila melanogaster resulted in marked cardiac dilatation, severe impairment of systolic performance and slower diastolic filling velocity assessed by fluorescence-based heart imaging. Finally, we showed that CL72:8 is significantly decreased in cardiac samples from patients with heart failure with reduced ejection fraction (HFrEF). In summary, we identified CLS as a regulator of cardiac function. Considering the cardiac depletion of CL-species in HFrEF, pharmacological targeting of CLS may be a promising therapeutic approach.zeige mehrzeige weniger
KW - High-resolution mass spectrometry
KW - Nontarget analysis
KW - Heart failure
KW - Cardiolipins
KW - Lipidomics
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-536833
DO - https://doi.org/10.1016/j.isci.2021.103314
VL - 24
IS - 11
SP - 103314
PB - Cell Press
AN - OPUS4-53683
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hudson, A.D.
A1 - Jamieson, O.
A1 - Crapnell, R.D.
A1 - Rurack, Knut
A1 - Soares, T.C.C.
A1 - Mecozzi, F.
A1 - Laude, A.
A1 - Gruber, J.
A1 - Novakovic, K.
A1 - Peeters, M.
T1 - Dual detection of nafcillin using a molecularly imprinted polymer-based platform coupled to thermal and fluorescence read-out
N2 - Reported here is the production of molecularly imprinted polymer (MIP) films, integrating a fluorescent moiety that serves as both an element for template interaction and signalling, for the thermal and optical detection of the beta-lactam antibiotic nafcillin. Fluorescein methacrylate (FluMa) was synthesized and introduced during the molecular imprinting process as the sole monomer and in a 1 : 1 mixture with methacrylic acid (MAA), allowing to draw first conclusions on the MIP formation potential of such a rather large and rigid monomer. At first, MIP microparticles containing FluMa were prepared by free radical polymerisation. Optical batch rebinding experiments revealed that FluMa can act as a functional monomer for selective detection of nafcillin; however, the addition of MAA as co-monomer significantly improved performance. Subsequently, thin MIP films containing FluMa were deposited onto functionalised glass slides and the influence of porogen, drying time, and monomer composition was studied. These MIP-functionalised glass electrodes were mounted into a customised 3D-printed flow cell, where changes in the liquid were either evaluated with a thermal device or using fluorescence bright field microscopy. Thermal analysis demonstrated that multiple MIP layers enhanced sensor specificity, with detection in the environmentally relevant range. The fluorescence bright field microscope investigations validated these results, showing an increase in the fluorescence intensity upon exposure of the MIP-functionalised glass slides to nafcillin solutions. These are promising results for developing a portable sensor device that can be deployed for antibiotics outside of a dedicated laboratory environment, especially if sensor design and fluorophore architecture are optimised.
KW - Molecularly Imprinted Polymers
KW - Fluorescence
KW - Antibiotics
KW - Heat-transfer Measurements
KW - Thin films
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-540044
DO - https://doi.org/10.1039/D1MA00192B
VL - 2
IS - 15
SP - 5105
EP - 5115
PB - Royal Society of Chemistry
CY - Cambridge
AN - OPUS4-54004
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Heide, Maximilian
A1 - Reifenrath, Jonas
A1 - Herrmann, Alexander
A1 - Engelhard, Carsten
T1 - Fast and Sustainable Active Pharmaceutical Ingredient (API) Screening in Over-the-Counter and Prescription Drug Products by Surface-Assisted Plasma-Based Desorption/Ionization High-Resolution Mass Spectrometry
N2 - Fast chemical analysis of pharmaceutical preparations is important for quality assurance, counterfeit drug detection, and consumer health. While quantitative methods such as high-performance liquid chromatography mass spectrometry (HPLC-MS) are powerful, there is a need for sustainable and environmentally friendly methods, which require less chemicals and produce less waste. Here, solvent-free ambient desorption/ionization (ADI) MS methods are attractive because they do not require time-consuming chromatography, produce little to no chemical waste, and, thus, contribute to green chemistry practice. In addition, sample throughput can be higher compared to HPLC-MS. In this study, a method for direct analysis of single- and multi agent drugs using a plasma-based ADI source (flowing atmospheric-pressure afterglow, FAPA) coupled to high-resolution (HR) MS was developed and optimized for best performance. The approach is rapid and only requires analytes to be in solution (only a few µL) before application onto thin-layer chromatography (TLC) surfaces, specifically dimethyl (RP2-) and cyano (CN-) modified silica, for surface-assisted (SA) FAPA-HRMS measurements. No chromatographic separation was required, and the TLC plates served only as sample carriers. A broad variety of 19 active pharmaceutical ingredients (APIs) was carefully selected to cover analgesics, anesthetics, antibiotics, antiepileptics, calcium channel blockers, diuretics, expectorants, opioids, peripheral vasodilators, stimulants, and sympathomimetics. Fast screening and identification of APIs was performed by SA-FAPA-HRMS. Typically, the protonated molecular ion ([M+H]+) was the most abundant species, while some compounds (codeine, metamizole, phenoxymethylpenicillin, and torasemide) did show some degree of fragmentation. As a proof-of-principle application, benzocaine was directly detected in saliva samples post-intake of a lozenge. Time-resolved semi-quantitative screening was performed. The limit of detection for benzocaine in saliva was 8 ng/mL (48.4 fmol) using internal standard calibration and CN-HPTLC plates. In addition, direct quantification of artificially spiked saliva was performed with minimal sample preparation. Here, SA-FAPA-HRMS with a CN-HPTLC sample substrate yielded best performance (20.02±0.52 µg/mL, RSD=2.6%, deviation of -1.9% from the theoretical value) compared to RP2-TLC (18.97±1.37 µg/mL, RSD=7.2%, -7.0%), and HPLC-UV (18.51±0.03 µg/mL, RSD=0.2%, -9.3%) results. In conclusion, SA FAPA HRMS is considered attractive for rapid and sustainable analysis of pharmaceuticals with potential in non-invasive patient monitoring.
KW - Mass Spectrometry
KW - Pharmaceuticals
KW - Green Chemistry
KW - Ambient Desorption/Ionization
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-640718
DO - https://doi.org/10.1039/D5AY01050K
SN - 1759-9660
VL - 17
IS - 18
SP - 7799
EP - 7809
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-64071
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Homann, Christian
A1 - Peeters, Régis
A1 - Mirmajidi, Hana
A1 - Berg, Jessica
A1 - Fay, Michael
A1 - Rodrigues, Lucas Carvalho Veloso
A1 - Radicchi, Eros
A1 - Jain, Akhil
A1 - Speghini, Adolfo
A1 - Hemmer, Eva
T1 - Rapid microwave-assisted synthesis of morphology-controlled luminescent lanthanide-doped Gd2O2S nanostructures
N2 - Gadolinium oxysulfide (Gd2O2S) is an attractive material of demonstrated suitability for a variety of imaging applications, leveraging its magnetic, scintillating, and luminescent properties, particularly when doped with optically active lanthanide ions (Ln3+). For many of these applications, control over size and morphology at the nanoscale is crucial. This study demonstrates the rapid microwave-assisted Synthesis of colloidal Ln2O2S (Ln = Gd and dopants Yb, Er, Tb) nanostructures in as little as 20 min. Structural characterization using X-ray diffraction analysis (XRD), Raman spectroscopy, as well as Transmission electron microscopy (TEM), including elemental mapping via energy dispersive X-ray spectroscopy (EDS), unveiled the key role of elemental sulphur (S8) in the reaction mixtures for materials growth. By systematically varying the Ln-to-S ratio from 1 : 0.5 to 1 : 15, controlled morphologies ranging from triangular nanoplatelets to berry- and flower-like shapes were achieved. Doping with Er3+/Yb3+ endowed the nano-triangles with upconverting and near-infrared emitting properties. Tb3+-doped Gd2O2S exhibited the characteristic green Tb3+ emission under UV excitation, while also showing X-ray excited optical luminescence (XEOL), rendering the material interesting as a potential nano-scintillator.
KW - Upconversion
KW - Microwave-assisted synthesis
KW - Synthesis
KW - Fluorescence
KW - Nano
KW - Particle
KW - NIR
KW - XRD
KW - X-ray fluoressence
KW - Morphology control
KW - Raman
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-647907
DO - https://doi.org/10.1039/D5TC01646K
SN - 2050-7526
VL - 13
IS - 35
SP - 18492
EP - 18507
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-64790
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Frenzel, Olivia
A1 - Westphalen, Tanja
A1 - Kaminski, Katja
A1 - Kluge, Stephanie
A1 - Bücker, Michael
A1 - Piechotta, Christian
T1 - Evaluation and Validation of an Accelerated Weathering Procedure to Characterise the Release of Bisphenol A from Polycarbonate Under Exposure to Simulated Environmental Conditions
N2 - Bisphenol A (BPA) has been listed as a substance of very high concern (SVHC) due to its endocrine-disrupting properties according to REACH in 2017. European competent authorities have prepared a REACH restriction proposal to reduce BPA levels in the environment. The proposed limit for the concentration of free BPA and other bisphenols in articles is 10 mg kg−1. If exceeded, migration testing can demonstrate that no more than 0.04 mg L−1 is released from the product or material over its lifetime. German authorities are drafting a new restriction proposal after the original was temporarily withdrawn. The residual and migration limits mentioned above were key requirements from the previous restriction proposal. Numerous national and international standards exist for assessing how environmental factors affect the physical and chemical properties of products and materials—such as notch impact strength and tensile strength—but these standards do not cover the release of pollutants. A standardised procedure that covers all aspects of artificial weathering and monitors the subsequent release of pollutants is necessary, especially in the context of the regulation of these substances. An accelerated weathering procedure was established for non-protected samples. This material was not intended for outdoor applications. The testing procedure applied a typical weathering scenario that represents Central European climate conditions. The procedure was validated and applied to samples under distinct quality assurance aspects. Released BPA is quantified via an organic isotope dilution LC-MS/MS method. In parallel, identical samples were weathered outdoors on a weathering rack. Haze and yellowness index are measured to compare outdoor and weathering chamber results.
KW - Artificial weathering
KW - Polycarbonate
KW - Bisphenol A
KW - Simulated environmental conditions
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-645020
DO - https://doi.org/10.3390/app151910361
SN - 2076-3417
VL - 15
IS - 19
SP - 1
EP - 15
PB - MDPI AG
AN - OPUS4-64502
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Matiushkina, Anna
A1 - Abram, Sarah-Luise
A1 - Tavernaro, Isabella
A1 - Richstein, R.
A1 - Reithofer, M. R.
A1 - Andresen, Elina
A1 - Michaelis, Matthias
A1 - Koch, Matthias
A1 - Resch-Genger, Ute
T1 - Quantifying Citrate Surface Ligands on Iron Oxide Nanoparticles with TGA, CHN Analysis, NMR, and RP-HPLC with UV Detection
N2 - Although citrate is frequently used as a surface ligand for nanomaterials (NMs) such as metal, metal oxide, and lanthanide-based NMs in hydrophilic environments due to its biocompatibility and simple replacement by other more strongly binding ligands in postsynthetic surface modification reactions, its quantification on NM surfaces has rarely been addressed. Here, we present a multimethod approach for citrate quantification on iron oxide nanoparticles (IONPs) broadly applied in the life and material sciences. Methods explored include thermogravimetric (TGA) and elemental (CHN) analysis, providing citrate-nonspecific information on the IONP coating, simple photometry, and citrate-selective reversed-phase high-performance liquid chromatography (RP-HPLC) with absorption (UV) detection and quantitative nuclear magnetic resonance spectroscopy (qNMR). Challenges originating from the strongly absorbing magnetic NM and paramagnetic iron species interfering with optical and NMR Methods were overcome by suitable sample preparation workflows. Our multimethod approach to citrate quantification highlights the advantages of combining specific and unspecific methods for characterizing NM Surface chemistry and method cross-validation. It also demonstrates that chemically nonselective measurements can favor an overestimation of the amount of a specific surface ligand by signal contributions from molecules remaining on the NM surface, e.g., from particle synthesis, such as initially employed ligands and/or surfactants. Our results emphasize the potential of underexplored selective RPHPLC for quantifying ligands on NMs, which does not require a multistep sample preparation workflow such as qNMR for many NMs and provides a higher sensitivity. These findings can pave the road to future applications of versatile HPLC methods in NM characterization.
KW - Advanced material
KW - Functional group
KW - Iron oxide
KW - Ligand
KW - Nano
KW - Particle
KW - Quantification
KW - Surface analysis
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-648632
DO - https://doi.org/10.1021/acs.analchem.5c03024
SN - 0003-2700
VL - 97
IS - 36
SP - 19627
EP - 19634
PB - American Chemical Society (ACS)
CY - Washington, DC
AN - OPUS4-64863
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Jaeger, Carsten
A1 - Lintelmann, Jutta
A1 - Franke, Raimo
A1 - Artati, Anna
A1 - Cecil, Alexander
A1 - Broda, Frank
A1 - Klawonn, Frank
A1 - Erban, Alexander
A1 - Kopka, Joachim
A1 - Fuchs, Beate
A1 - Sommer, Ulf
A1 - Neumann-Schaal, Meina
A1 - O'Connor, Gavin
T1 - Analytical practices, use and needs of standard and reference materials in the German-speaking metabolomics community: results of an online survey
N2 - Introduction
Since the early 2000s, metabolomics has grown rapidly, becoming integral to fields like life sciences, health, and environmental research. This expansion has led to the formation of national and international societies, such as Germany’s DGMet, to tackle emerging challenges. One of DGMet’s goals is to improve measurement quality by assessing community needs for harmonization and standardization. A recent survey within the German-speaking community aimed to identify current practices and gaps in the use of chemical standards and reference materials, to guide future standardization efforts and collaborative initiatives.
Methods
An online survey was conducted between June 2023 and April 2024. The survey consisted of 38 key questions and was open to research institutions from Germany, Austria, and Switzerland.
Results
The survey was accessed by 68 laboratories, with 23 institutes providing complete or partial responses (34% response rate), which is comparable to rates reported in similar surveys within the metabolomics and lipidomics communities. Respondents were mainly experienced researchers from Germany, focusing mainly on health-related (“red”) metabolomics, as indicated by 78% of the respondents, followed by microbial (“grey”, 48%) and plant (“green”, 39%) metabolomics (multiple answers possible). The use of targeted methods was reported more frequently (91%) than that of non-targeted methods (78%), whereas metabolite fractions studied were equally split between polar, midpolar and lipid fractions (83% each). Human (74%), mouse (61%) and Arabidopsis (30%) were the most frequently studied organisms. Most participants used synthetic chemical standards for instrument qualification (83%), calibration (78%), and metabolite identification (74%), while matrix reference materials were mainly applied for quality control (52%) and method validation (44%). There was a strong demand for more standards, especially for metabolite identification and quantification, with cost being a major barrier, particularly for isotopically labelled standards and certified reference materials.
Conclusions
Valuable insights into the use of standards and reference materials within the German-speaking metabolomics community were obtained. Moving forward, the community should address critical gaps in metabolomics standardization. To achieve this, it must share its knowledge, articulate its needs clearly, and actively engage in joint efforts with national metrology institutes and international standardization initiatives.
KW - Reference material
KW - Chemical standard
KW - Metabolomics
KW - Mass spectrometry
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-647303
DO - https://doi.org/10.1007/s11306-025-02360-x
VL - 21
IS - 6
SP - 1
EP - 11
PB - Springer-Nature
CY - Heidelberg
AN - OPUS4-64730
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Li, Xunyu
A1 - Riedel, Jens
A1 - You, Yi
T1 - Practical high-resolution spectroscopy with a spatial heterodyne spectrometer: Determination of instrumental function for lineshape recovery
N2 - The spatial heterodyne spectrometer (SHS) is a well-recognized platform for its high resolving power in various use cases of spectroscopy. Same as other spectrometer topologies, the SHS, unfortunately, also suffers from classical challenges such as distorted lineshape due to the instrumental function. The goal of this work is to tackle this persisting issue through a simple numerical approach. With the inherent characteristics of an SHS interferogram, we report the direct extraction and determination of the instrumental function in its numerical representation from an SHS interferogram; this instrumental function was further used for spectral data processing that enables significant improvements in spectral resolution through deconvolution algorithms.Here, we systematically discuss the recognition of the embedded instrumental function among various ingredients within an interferogram. To verify the numerical approach, lithium was chosen as the model sample, resembling the use of SHS in an isotopic analysis application. Specifically, the resonance transition of lithium D-lines (2P1/2,3/2 ← 2S1/2) was selected to assess the performance of the spectral processing. With the spectral deconvolution, the spectral features that represent the 6Li and 7Li were nearly baseline-separated, allowing for the accurate measure of the isotopic abundance without external references or algorithm adjustments (e.g., curve fitting).
KW - SHS
KW - Isotopic analysis
KW - High Resolution
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-613401
DO - https://doi.org/10.1016/j.sab.2024.107053
SN - 0584-8547
VL - 221
SP - 1
EP - 5
PB - Elsevier
AN - OPUS4-61340
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Steinbeck, Christoph
A1 - Jung, Nicole
A1 - Bach, Felix
A1 - Neumann, Steffen
A1 - Herres-Pawlis, Sonja
A1 - Liermann, Johannes
A1 - Koepler, Oliver
A1 - Bannwarth, Christoph
A1 - Bender, Theo
A1 - Bocklitz, Thomas
A1 - Boehm, Franziska
A1 - Bonatto Minella, Christian
A1 - Biedermann, Frank
A1 - Brack, Werner
A1 - Cunha, Ricardo
A1 - Czodrowski, Paul
A1 - Eberl, Franziska
A1 - Engel, Thomas
A1 - Engstfeld, Albert
A1 - Fischer, Tillmann G.
A1 - Friedrich, Pascal
A1 - Glorious, Frank
A1 - Golub, Benjamin
A1 - Grathwol, Christoph
A1 - Haag, Rainer
A1 - Hunold, Johannes
A1 - Jacob, Christoph
A1 - Johannsen, Jochen
A1 - Jollife, John
A1 - Kast, Stefan
A1 - Kettner, Carsten
A1 - Kuhn, Stefan
A1 - Lanza, Giacomo
A1 - Lisec, Jan
A1 - Manolikakes, Georg
A1 - Mata, Ricardo
A1 - Meiler, Jens
A1 - Müller, Matthias
A1 - Müller-Pfefferkorn, Ralph
A1 - Ortmeyer, Jochen
A1 - Patterson, Wendy
A1 - Pleiss, Jürgen
A1 - Riedel, Annalisa
A1 - Riedel, Jens
A1 - Schatzschneider, Ulrich
A1 - Schuster, Leonie
A1 - Seeberger, Peter
A1 - Seibert, Johann-Nikolaus
A1 - Stadler, Peter
A1 - Zeitler, Kirsten
T1 - Proposal NFDI4Chem 2025-2030 In the National Research Data Infrastructure (NFDI) — Our Vision: All Chemists Publish FAIR Data
N2 - The first funding period of NFDI4Chem established a robust foundation for research data management (RDM) in chemistry by promoting FAIR data principles and creating a cohesive infrastructure to capture well-annotated data early in the lab through electronic lab notebooks (ELNs) and making this data available in public repositories. Key achievements include standardised data formats and metadata, a federated repository environment, and improved data visibility and accessibility. Training programs and outreach have significantly increased awareness and adoption of best RDM practices. In the second funding period, the consortium aims to advance these achievements by consolidating this infrastructure, developing a model for its sustainable maintenance and operation, and fostering cultural change for its widespread adoption. Goals include ensuring seamless data workflows from laboratories to open repositories, enhancing interoperability, and supporting innovative research through AI-ready data. The work plan is organised into six task areas (TAs). TA1 (Management) provides leadership and supports all other TAs in achieving their objectives. TA2 (Smart Lab) aims to develop a fully digital research environment, including an ELN as a modular platform. This environment will support data collection, management, storage, analysis, and sharing. Integrating devices and external resources will enable seamless data transfer to repositories. TA3 (Repositories) will consolidate the repository ecosystem. The goal is to integrate repositories into a federated system for better accessibility and interoperability, ensuring long-term data availability and sustainability. TA4 (Metadata, Data Standards, and Publication Standards) focuses on developing and promoting new data and metadata standards in an international community process. This includes applying ontologies to create a semantic foundation for linking research data, making it machine-readable and enabling knowledge graphs. TA5 (Community and Training) is dedicated to fostering a cultural shift towards digital chemistry through continuous engagement, collecting requirements, and providing extensive training and support through workshops and open education resources. It will promote FAIR-compliant machine learning applications, embedding RDM into academic curricula to ensure future scientists are well-versed in these practices. TA6 (Synergies and Cross-Cutting Topics) aims to enhance collaboration across NFDI consortia and beyond. This includes developing ontologies, terminology services, the search service, and other cross-cutting solutions, integrating these developments into existing infrastructure, enabling interdisciplinary data harmonisation and fostering machine learning applications.
KW - Research Data Management
KW - FAIR
KW - Chemistry
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-648540
DO - https://doi.org/10.3897/rio.11.e177037
SN - 2367-7163
VL - 11
SP - 1
EP - 100
PB - Pensoft Publishers
AN - OPUS4-64854
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - You, Yi
A1 - Riedel, Jens
T1 - Approaching phase-imaging through defocusing shadowgraphy for acoustic resonator diagnosis and the capability of direct index-of-refraction measurements
N2 - The visualization of index-of-refraction (IoR) distribution is one of the common methods to investigate fluid flow or pressure fields. While schlieren and shadowgraphy imaging techniques are widely accepted, their inherent limitations often lead to difficulties in elucidating the IoR distribution and extracting the true IoR information from the resulting images. While sophisticated solutions exist, the IoR-gradient-to-image was achieved by purposely introducing a commonly avoided “defect” into the optical path of a conventional coincident schlieren/shadowgraphy setup; the defect is a combination of slight defocusing and the use of non-conjugate optical components. As such, the method presented in this work is referred to as defocusing shadowgraphy, or DF-shadowgraphy. While retaining the ease of a conventional schlieren/shadowgraphy geometry, this DF approach allows direct visualization of complicated resonant acoustic fields even without any data processing. For instance, the transient acoustic fields of a common linear acoustic resonator and a two-dimensional one were directly visualized without inversion. Moreover, the optical process involved in DF-shadowgraphy was investigated from a theoretical perspective. A numerical solution of the sophisticated impulse response function was obtained, which converts the phase distortion into intensity distributions. Based on this solution, the IoRs of various gas streams (e.g., CO2 and isopropanol vapor) were determined from single images.
KW - Imaging Technique
KW - Phase Imaging
KW - Shadowgraphy
KW - Schlieren Imaging
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537116
DO - https://doi.org/10.1063/5.0058334
SN - 1089-7623
VL - 92
IS - 10
SP - 103703
PB - AIP Publishing Group
AN - OPUS4-53711
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - You, Yi
A1 - Danischewski, Julia
A1 - Molnar, Brian
A1 - Riedel, Jens
A1 - Shelley, Jacob
T1 - Manipulation of Gaseous Ions with Acoustic Fields at Atmospheric Pressure
N2 - The ability to controllably move gaseous ions is an essential aspect of ion-based spectrometry (e.g., mass spectrometry and ion mobility spectrometry) as well as materials processing. At higher pressures, ion motion is largely governed by diffusion and multiple collisions with neutral gas molecules. Thus, high-pressure ion optics based on electrostatics require large fields, radio frequency drives, complicated geometries, and/or partially transmissive grids that become contaminated. Here, we demonstrate that low-power standing acoustic waves can be used to guide, block, focus, and separate beams of ions akin to electrostatic ion optics. Ions preferentially travel through the static-pressure regions (“nodes”) while neutral gas does not appear to be impacted by the acoustic field structure and continues along a straight trajectory. This acoustic ion manipulation (AIM) approach has broad implications for ion manipulation techniques at high pressure, while expanding our fundamental understanding of the behavior of ions in gases.
KW - Ion mobility spectrometry
KW - Acoustic
KW - Mass spectrometry
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600704
DO - https://doi.org/10.1021/jacs.4c01224
SP - 1
EP - 6
PB - ACS Publications
AN - OPUS4-60070
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Riedel, Jens
A1 - Hufgard, Josefin
A1 - You, Yi
T1 - LIBS at high duty-cycles: effect of repetition rate and temporal width on the excitation laser pulses
N2 - Laser-induced breakdown spectroscopy (LIBS) is becoming a more mature technology every year with new variants such as laser ablation molecular isotopic spectrometry, reheating by various discharge techniques, and multiple pulse excitation schemes, in which sometimes lasers of different pulse lengths are used. However, lasers with inherent parameters like pulse length and repetition rate are still almost exclusively employed. Recent years have witnessed the advent of novel high-repetition-rate laser concepts for machining processes, like welding, milling, and engraving. Here, a comprehensive study of single-pulse LIBS spectra of a single aluminum target is presented to showcase the applicability of flexible high duty-cycle master oscillator power amplifier (MOPA) lasers. Although traditional flashlamp-pumped Fabry–Pérot lasers only permit a variation in the pulse energy and are operated at very low duty-cycles, MOPA lasers add repetition rate and pulse length as variable parameters. A thorough analysis of the temporal plasma behavior revealed the emission dynamic to closely match the excitation laser pulse pattern. An aluminum sample’s spectral response was shown to be significantly impacted by variations in both rate and length. Although the spectral emission strength of the elemental lines of Al, Sr, and Ca all peaked at slightly different parameter settings, the strongest impact was found on the relative abundance of molecular AlO bands. Unlike in previous laser ablation molecular isotopic spectrometry (LAMIS) publications, the latter could be readily detected with a good intensity and well-resolved spectral features without any temporal gating of the detector. This finding, together with the fact that MOPA lasers are both inexpensive and dependable, makes for a promising combination for future studies including the detection of diatomic band structures.
KW - Laser-induced breakdown spectroscopy
KW - LIBS
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-583300
DO - https://doi.org/10.3389/fphy.2023.1241533
SN - 2296-424X
VL - 11
SP - 1
EP - 8
AN - OPUS4-58330
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kalmbach, J.
A1 - Wang, Cui
A1 - You, Yi
A1 - Förster, C.
A1 - Schubert, H.
A1 - Heinze, K.
A1 - Resch-Genger, Ute
A1 - Seitz, M.
T1 - Near-IR to near-IR upconversion luminescence in molecular chromium ytterbium salts
N2 - Upconversion photoluminescence in hetero-oligonuclear metal complex architectures featuring organic ligands is an interesting but still rarely observed phenomenon, despite its great potential from a basic research and application perspective. In this context, a new photonic material consisting of molecular chromium(III) and ytterbium(III) complex Ions was developed that exhibits excitation-power density-dependent cooperative sensitization of the chromium-centered 2E/2T1 phosphorescence at approximately 775 nm after excitation of the ytterbium band 2F7/2!2F5/2 at approximately 980 nm in the solid state at ambient temperature. The upconversion process is insensitive to atmospheric oxygen and can be observed in the presence of water molecules in the crystal lattice.
KW - Upconversion
KW - Lanthanide
KW - Photoluminescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - NIR
KW - Cr(III)
KW - Yb(III) complex
KW - Crystal
KW - Triplet-triplet annihilation
KW - Sensitization
KW - Light harvesting
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-512619
DO - https://doi.org/10.1002/anie.202007200
SN - 1433-7851
SN - 1521-3773
VL - 59
IS - 42
SP - 18804
EP - 18808
PB - Wiley
CY - Weinheim
AN - OPUS4-51261
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Xue, Boyang
A1 - Wang, Zhangjun
A1 - Zhu, Tao
A1 - Gu, Yezhen
A1 - Sun, Weihong
A1 - Chen, Chao
A1 - Li, Zhigang
A1 - Riedel, Jens
A1 - You, Yi
T1 - High repetition-rate laser-induced breakdown spectroscopy combined with two-dimensional correlation method for analysis of sea-salt aerosols
N2 - Laser-induced breakdown spectroscopy (LIBS) offers a tantalizing glimpse into real-time, on-the-spot aerosol analysis. Yet, the reliance on traditional lasers, with their limitations in energy and frequency, hampers optimal sample handling, dissociation, and excitation. To address those challenges, we propose a novel tactic: utilize a high repetition-rate (rep.-rate) laser with low pulse energy in combination with the two-dimensional correlation (2D-corr.) technique for sea-salt aerosols analyses. By examining the emission patterns from both the laser pulse train and individual pulses, we recognize distinctive analyte-specific rep.-rate responses, which allowed spectral reconstruction of analytes, avoiding background interferences. This discovery enabled the rep.-rate modulation for a 2D-corr. spectroscopy workflow. Consequently, we successfully differentiated between particle-related and air-species-related spectral components, obviating expensive spectrometers or intensified image detectors. For instance, the Na I at 589 nm stemming from aerosols exhibited an entirely different correlation contribution compared to O I at 777 nm, resulting in reconstructed clean aerosol-spectra without spectral peaks originated from air species. This 2D-corr. aerosol LIBS approach shows promising analytical potential streamlining aerosol particle analysis.
KW - LIBS
KW - Aerosol
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-613392
DO - https://doi.org/10.1016/j.sab.2024.107048
SN - 0584-8547
VL - 221
SP - 1
EP - 8
PB - Elsevier
AN - OPUS4-61339
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Li, Xunyu
A1 - Riedel, Jens
A1 - You, Yi
T1 - Spectrally resolved lithium isotope quantification through high-resolution spatial heterodyne spectrometry
N2 - Isotope ratio determination of lithium is increasingly important in fields ranging from geochemistry to battery diagnostics. While mass spectrometry remains the gold standard, it is costly, cumbersome, and incompatible with portable or inline implementations. Optical emission spectroscopy presents an appealing alternative. However, it is traditionally limited by insufficient spectral resolution or resolving power to separate lithium isotope emissions due to their generalized designs for a wide spectral range; this often requires overly complicated algorithms to overcome the instrumental drawbacks. (79)
Results Here, we report a high-resolution optical method for lithium isotope quantification using a custom-built spatial heterodyne spectrometer (SHS) combined with a reduced-pressure glow discharge source. This configuration yielded a resolving power of 189,000 and enabled baseline resolution of lithium d-line emission features even without the need for preliminary data processing. Despite the inherent low sensitivity of SHS, a detection limit of 30 pmol was achieved using a standard industrial camera. To improve quantitative accuracy, we introduced a deconvolution-based spectral lineshape recovery technique alongside a bootstrapping-based error propagation strategy. These methods facilitated robust isotope ratio calibration using both peak-height and peak-area metrics. The SHS platform additionally enabled the determination of relative transition probabilities, suggesting the feasibility of calibration-free operation.
This work demonstrates the practical viability of SHS for high-specificity, high-resolution lithium isotope analysis. The approach is compact, potentially field-deployable, and adaptable to other elements with optically resolvable isotope shifts, offering a route toward accessible and calibration-free optical isotopic analyses.
KW - SHS
KW - Isotope
KW - High-resolution spectroscopy
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-635139
DO - https://doi.org/10.1016/j.aca.2025.344329
SN - 1873-4324
VL - 1368
SP - 1
EP - 8
PB - Elsevier B.V.
AN - OPUS4-63513
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Mohan, M.
A1 - Prochazka, D.
A1 - You, Yi
A1 - Riedel, Jens
A1 - Gornushkin, Igor
A1 - Rocnakova, I.
A1 - Papula, M.
A1 - Porízka, P.
A1 - Kaizer, J.
T1 - Investigating plasma morphology at material boundaries under varying ambient pressures
N2 - Laser-Induced Breakdown Spectroscopy (LIBS) is a widely used technique for elemental analysis. The analysis of the obtained LIBS spectra generally assumes plasma homogeneity. However, using focused laser beams for interrogation, LIBS probes materials on the microscale and is, thus, prone to artefacts from sample heterogeneities on the micrometer scale. An ablation at a material boundary of two matrices may result in a significant inhomogeneity in the plasma plume, which can severely impact the accuracy of quantitative analysis. Since this propagation of the surface morphology into the plasma plume is driven by the plasma expansion, its final impact is strongly pressure dependent. This study examines the influence of varying ambient pressures (7–1000 mbar) on plasma morphology, spectral characteristics, and key plasma properties such as electron number density at a well-defined Cu–Sn boundary, in comparison with the results obtained using homogeneous alloys. Several approaches of plasma imaging with bandpass filters, spectroscopy, and Radon transform-based 3D reconstruction were employed to analyze elemental distribution, signal-to-noise (SNR) and signal-to-background (SBR) ratios, as well as electron number densities. The 3D reconstructions revealed a pronounced plasma asymmetry for the ablation at the material boundary, in contrast to the near-axial symmetry observed for the ablation of homogeneous alloys. At lower pressures, this distinct elemental separation in plasma persisted, while higher pressures led to an increased collisional mixing and homogenization. SNR and SBR were consistently lower for ablation at the boundary compared to homogeneous samples. These findings highlight how boundary ablation contributes to plasma inhomogeneities in LIBS analysis of heterogeneous materials and emphasize the need to account for these
effects when using LIBS for elemental mapping of fine heterogeneous structures.
KW - Laser-induced breakdown spectroscopy
KW - Plasma inhomogeneity
KW - Plasma tomography
KW - Radon transform
KW - Material boundaries
KW - Ambient pressure effects
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634777
DO - https://doi.org/10.1016/j.talanta.2025.128377
SN - 1873-3573
VL - 295
SP - 1
EP - 8
PB - Elsevier B.V.
AN - OPUS4-63477
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - You, Yi
A1 - Xue, Boyang
A1 - Riedel, Jens
T1 - Enhancement of LIBS plasma in air with organic solvent vapors
N2 - Laser-induced breakdown spectroscopy (LIBS) offers versatile, field-deployable elemental analysis; however, compact, high-repetition-rate nanosecond laser systems typically face constraints in power consumption and size, often compromising emission intensity and thus analytical performance. We demonstrate a significant improvement in LIBS signals through the controlled introduction of common organic solvent vapors into a sheath gas, with a diode-pumped solid-state laser (1064 nm, 2–28 kHz repetition rate, 450–600-μJ pulse energy). Optical and acoustic diagnostics reveal up to ca. 40-fold enhancement of the N II emission line at 567 nm when ambient air serves as the analyte. Maximal enhancement occurs at intermediate repetition rates of ca. 15 kHz, particularly at pulse energies approaching the optical breakdown threshold; this observation suggests a viable strategy for operating LIBS at lower pulse energies and higher repetition rates. Enhancement effects scale jointly with both vapor pressure and ionization energy of the organic species, with acetone and toluene markedly outperforming methanol and isopropanol. These findings provide a rational foundation for significantly improving the analytical performance of portable LIBS instruments without exceeding platform-specific constraints.
KW - LIBS
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653758
DO - https://doi.org/10.1016/j.sab.2025.107309
SN - 0584-8547
VL - 236
SP - 1
EP - 6
PB - Elsevier B.V.
AN - OPUS4-65375
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wittwer, Philipp
A1 - Roesch, Philipp
A1 - Vogel, Christian
A1 - Simon, Fabian
A1 - Gehrenkemper, Lennart
A1 - Feldmann, Ines
A1 - Simon, Franz-Georg
T1 - Less Is More: Influence of Cross-Linking Agent Concentration on PFOS Adsorption in Chitosan
N2 - As a result of the continuous use of persistent per- and polyfluoroalkyl substances (PFAS), e.g., in aviation firefighting foams, contamination with PFAS has been found in soil, groundwater, and surface water around thousands of industrial and military installations. Due to their harmful (environmental) potential, further dispersion in the environment needs to be stopped, which can be achieved by appropriate absorption materials. In this work, the influence of the cross-linking agent epichlorohydrin (ECH) concentration on the perfluorooctanesulfonic acid (PFOS) adsorption capacity of chitosan gel was investigated. It was found that higher ECH concentration during the cross-linking step decreases the PFOS adsorption capacity of the cross-linked chitosan gel from 0% to 4% ECH solution by about 15%. Using a concentration of 1%, ECH resulted still in an acid-stable material, and a maximum PFOS loading capacity of 4.04 mmol/g was obtained, one of the highest described in the literature. Furthermore, we used a rapid small-scale column test to compare the PFOS adsorption capacity of chitosan and activated carbon, each in both milled and unmilled form. Unmilled chitosan showed the highest PFOS adsorption capacity considering adsorption material dry masses (>0.9 and <0.4 mmol/g for both types of chitosan and activated carbon, respectively). Milled activated carbon proved to be the better adsorption material, considering the fixed volume of the adsorber (>99.9% PFOS adsorbed). Overall, the cross-linking agent concentration in chitosan is a crucial factor influencing its PFOS absorption potential. Our results feature cross-linked chitosan as an effective economic and ecologic alternative for PFOS adsorption in aqueous solutions.
KW - Combustion Ion Chromatography
KW - Per- and Polyfluoroalkyl substances (PFAS)
KW - Remediation
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618406
DO - https://doi.org/10.3390/app142311145
VL - 14
IS - 23
SP - 1
EP - 13
PB - MDPI
AN - OPUS4-61840
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Schutter, Jan David
A1 - Eberhardt, Karl
A1 - Elert, Anna Maria
A1 - Radnik, Jörg
A1 - Geißler, Daniel
A1 - Özcan Sandikcioglu, Özlem
T1 - Synthesis and characterization of lipopolysaccharide (LPS) anchored polystyrene microparticles as a synthetic model system for attachment studies
N2 - Outer membrane lipopolysaccharides (LPS) play a crucial role in determining attachment behavior and pathogenicity of bacteria. The aim of this study was to develop a simple procedure for anchoring bacterial lipopolysaccharides to polystyrene (PS) microparticles as a model system for in situ attachment studies. By using a swellcapture methodology, commercially available LPS of Pseudomonas aeruginosa (strain ATCC 27316 serotype 10.22) was anchored onto PS microparticles in a proof-of-concept study. A detailed chemical and morphological characterization has proven the success of LPS incorporation. It was shown that the coverage and structure of the LPS film was concentration dependent. The procedure can easily be adapted to LPS of other bacterial strains to generate a synthetic model toolkit for attachment studies.
KW - Bacterial lipopolysaccharides
KW - Pseudomonas aeruginosa
KW - Polystyrene microparticles
KW - Swell-capture
KW - Biomimicry
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-579818
DO - https://doi.org/10.1016/j.colsurfb.2023.113301
SN - 0927-7765
VL - 226
SP - 1
EP - 7
PB - Elsevier B.V.
AN - OPUS4-57981
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wetzel, Annica
A1 - von der Au, Marcus
A1 - Dietrich, P. M.
A1 - Radnik, Jörg
A1 - Özcan Sandikcioglu, Özlem
A1 - Witt, Julia
T1 - The comparison of the corrosion behavior of the CrCoNi medium entropy alloy and CrMnFeCoNi high entropy alloy
N2 - This work presents the determination of the corrosion characteristics of CrCoNi (medium entropy alloy) and CrMnFeCoNi (high entropy alloy) in 0.1 M NaCl and 0.1 M H2SO4. The morphology and chemical composition of the oxide layers formed on CrCoNi and CrMnFeCoNi were comparatively analyzed by scanning Kelvin probe microscopy (SKPFM) and scanning electron microscopy (SEM) and supported with chemical analysis by means of inductively coupled plasma mass spectrometry (ICP-MS) and X-Ray photoelectron spectroscopy (XPS). The analysis of the 3p core level peaks showed that the oxide layer (native and after anodic passivation) on CrCoNi consisted mainly of Cr oxides, while the oxide layer on CrMnFeCoNi was primarily composed of a mixture of Cr and Fe oxides. In addition, XPS was utilized to assess the oxide layer thicknesses. These results were compared to the thicknesses obtained by means of electrochemical impedance spectroscopy (EIS), with both approaches yielding values up to about 4 nm depending on the electrolyte and the alloy. Cyclic polarization measurements indicated superior corrosion resistance of CrCoNi in both aqueous environments compared to CrMnFeCoNi, as well as to AISI 304 stainless steel.
KW - Medium entropy alloy
KW - High entropy alloy
KW - SKPFM
KW - XPS
KW - Passivation
KW - Corrosion
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-559902
DO - https://doi.org/10.1016/j.apsusc.2022.154171
SN - 0169-4332
VL - 601
SP - 1
EP - 10
PB - Elsevier B.V.
AN - OPUS4-55990
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wen, Keqing
A1 - Gorbushina, Anna
A1 - Schwibbert, Karin
A1 - Bell, Jérémy
T1 - Microfluidic platform with precisely controlled hydrodynamic parameters and integrated features for generation of microvortices to accurately form and monitor biofilms in flow
N2 - Microorganisms often live in habitats characterized by fluid flow, and their adhesion to surfaces in industrial systems or clinical settings may lead to pipe clogging, microbially influenced corrosion, material deterioration, food spoilage, infections, and human illness. Here, a novel microfluidic platform was developed to investigate biofilm formation under precisely controlled (i) cell concentration, (ii) temperature, and (iii) flow conditions. The developed platform central unit is a single-channel microfluidic flow cell designed to ensure ultrahomogeneous flow and condition in its central area, where features, e.g., with trapping properties, can be incorporated. In comparison to static and macroflow chamber assays for biofilm studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes and have better environment control and smaller sample requirements. Flow simulations and experiments with fluorescent particles were used to simulate bacteria flow in the platform cell for calculating flow velocity and direction at the microscale level. The combination of flow analysis and fluorescent strain injection in the cell showed that microtraps placed at the center of the channel were efficient in capturing bacteria at determined positions and to study how flow conditions, especially microvortices, can affect biofilm formation. The microfluidic platform exhibited improved performances in terms of homogeneity and robustness for in vitro biofilm formation. We anticipate the presented platform to be suitable for broad, versatile, and high-throughput biofilm studies at the microscale level.
KW - Topographical pattern
KW - E. coli
KW - Fluorescence
KW - Bacteria trapping
KW - Particle velocimetry
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-610450
DO - https://doi.org/10.1021/acsbiomaterials.4c00101
SN - 2373-9878
VL - 10
IS - 7
SP - 4626
EP - 4634
PB - ACS Publ.
CY - Washington, DC
AN - OPUS4-61045
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wetzel, Annica
A1 - Morell, Daniel
A1 - von der Au, Marcus
A1 - Wittstock, Gunther
A1 - Özcan Sandikcioglu, Özlem
A1 - Witt, Julia
T1 - Transpassive Metal Dissolution vs. Oxygen Evolution Reaction: Implication for Alloy Stability and Electrocatalysis
T1 - Transpassive Metallauflösung vs. Sauerstoffentwicklung:
Auswirkungen auf Legierungsstabilität und Elektrokatalyse
N2 - Multi-principal element alloys (MPEAs) are gaining interest in corrosion and electrocatalysis research due to their electrochemical stability across a broad pH range and the design flexibility they offer. Using the equimolar CrCoNi alloy, we observe significant metal dissolution in a corrosive electrolyte (0.1 M NaCl, pH 2) concurrently with the oxygen evolution reaction (OER) in the transpassive region despite the absence of hysteresis in polarization curves or other obvious corrosion indicators. We present a characterization scheme to delineate the contribution of OER and alloy dissolution, using scanning electrochemical microscopy (SECM) for OER-onset detection, and quantitative chemical analysis with inductively coupled-mass spectrometry (ICP-MS) and ultraviolet visible light (UV-Vis) spectroscopy to elucidate metal dissolution processes. In-situ electrochemical atomic force microscopy (EC-AFM) revealed that the transpassive metal dissolution on CrCoNi is dominated by intergranular corrosion. These results have significant implications for the stability of MPEAs in corrosion systems, emphasizing the necessity of analytically determining metal ions released from MPEA electrodes into the electrolyte when evaluating Faradaic efficiencies of OER catalysts. The release of transition metal ions not only reduces the Faradaic efficiency of electrolyzers but may also cause poisoning and degradation of membranes in electrochemical reactors.
N2 - Multi-Hauptelement-Legierungen (MPEAs) gewinnen in der Korrosions- und Elektrokatalyseforschung aufgrund ihrer elektrochemischen Stabilität über einen breiten pH-Bereich und der Vielfalt der möglichen chemischen Zusammensetzungen zunehmend an Interesse. In unseren Untersuchungen mit der äquimolaren CrCoNi-Legierung in einem sauren Elektrolyten (0.1 M NaCl, pH 2) beobachteten wir eine signifikante Metallauflösung, die mit der Sauerstoffentwicklungsreaktion (OER) im transpassiven Bereich einhergeht, obwohl in zyklischen Polarisationskurven keine Hysterese auftrat oder andere offensichtliche Korrosionsindikatoren vorlagen. In diesem Artikel wird ein Charakterisierungskonzept eingeführt, dass die Beiträge der OER und der Legierungsauflösung differenziert. Hierfür kommt die elektrochemische Rastermikroskopie (SECM) zum Nachweis des Beginns der OER und die quantitative chemische Analyse mit induktiv gekoppelter Massenspektrometrie (ICP-MS) und UV/Vis-Spektrometrie zur Aufklärung der Metallauflösungsprozesse zum Einsatz. Die elektrochemische In situ-Atomkraftmikroskopie (EC-AFM) zeigte, dass die intergranulare Korrosion der dominierende Mechanismus der transpassive Metallauflösung von CrCoNi ist. Diese Ergebnisse besitzen erhebliche Auswirkungen für die Beurteilung der Stabilität von MPEAs in Korrosionssystemen und der Stromausbeute von OER-Katalysatoren auf der Basis von MPEAs. Die Daten unterstreichen die Notwendigkeit der analytischen Bestimmung von Metallionen, die von MPEA-Elektroden freigesetzt werden. Die Freisetzung von Übergangsmetallionen verringert nicht nur die Stromausbeute von Elektrolyseuren, sondern kann zu einer Schädigung von Membranen in elektrochemischen Reaktoren führen.
KW - Transpassive dissolution
KW - Corrosion
KW - Multi-prinicpal element alloys (MPEAs)
KW - Passivation
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-597045
DO - https://doi.org/10.1002/anie.202317058
SP - 1
EP - 8
PB - Wiley VHC-Verlag
AN - OPUS4-59704
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kleinbub, Sherin
A1 - Braymer, Joseph J
A1 - Pfeiffer, Friedhelm
A1 - Dyall-Smith, Mike
A1 - Spirgath, Kristin
A1 - Alfaro-Espinoza, Gabriela
A1 - Koerdt, Andrea
T1 - From Genes to Black Rust: Genomic insights into corrosive methanogens
N2 - Within the past ten years, genetic evidence has been increasing for the direct role that microbes play in microbiologically influenced corrosion (MIC), also known as biocorrosion or biodeterioration. One prominent example is the correlation between the corrosion of metal and the presence of genes encoding an extracellular [NiFe]-hydrogenase (MIC hydrogenase) in the methanogenic archaeon, Methanococcus maripaludis. In this study, DNA sequencing and bioinformatic analysis were used to classify the MIC hydrogenase as belonging to a core set of genes, the MIC core, found so far in Methanococci and Methanobacteria classes of methanogens. Genetic evidence is provided for the mobilization of the MIC core via multiple mechanisms, including a horizontal gene transfer event from Methanobacteria to Methanococci and a newly described MIC-transposon. A detailed comparison of M. maripaludis genomes further pointed to the relevance that cell wall modifications involving N-glycosylation of S-layer proteins and the MIC hydrogenase likely play in methanogen-induced MIC (Mi-MIC). Microscopic analysis of corrosive methanogens encoding the MIC core indicated that Methanobacterium-affiliated strain IM1 can form extensive biofilms on the surface of corrosion products whereas individual cells of M. maripaludis Mic1c10 were only found localized to crevices in the corrosion layer. An updated model of Mi-MIC involving two modes of action is presented, which predicts that the propensity of cells to adhere to iron surfaces directly influences the rate of corrosion due to the localization of the MIC hydrogenase at the metal-microbe interface.
KW - Biocorrosion
KW - Hydrogenases
KW - Metalloprotein
KW - Microbes
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-649425
DO - https://doi.org/10.1093/femsmc/xtaf018
SN - 2633-6685
VL - 6
SP - 1
EP - 19
PB - Oxford University Press (OUP)
AN - OPUS4-64942
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Richter, Matthias
A1 - Schühle, Florian
T1 - Experimental determination of 7-day uptake rates for diffusive sampling of 86 volatile and semi-volatile organic compounds relevant for indoor air monitoring and investigation on their sensitivity to exposure time and indoor climate
N2 - This study aimed to experimentally determine uptake rates for 86 indoor relevant volatile and semi-volatile organic compounds (VOC, SVOC) for the passive sampler type Perkin Elmer/Markes™ with Tenax® TA as sorbent, which was used in the German Environmental Survey on Health (GerES VI) carried out by the German Environmental Agency (UBA) in the years 2023-2024. For this purpose, single reference gas atmospheres of 76 pure VOCs (liquid at room temperature) and a group of 10 SVOCs and VOCs (solid at room temperature) were generated using two generation procedures. By exposing the samplers to individual components, it was ruled out that interactions in a mixture have a influence on the uptake rate. Another aspect was to precisely describe the methodology and the resulting uncertainties, as there are gaps in the literature in this regard. The selection of the compounds was based on the findings of the preceding GerES V study for which data was missing or needed to be verified. In each experiment, a number of six passive samplers was exposed to the test gas atmospheres in dynamically operated exposure chambers for seven days. The sensitivity of the uptake rates of a group of 10 selected VOCs to variations in exposure time, ambient temperature, and air humidity in a multi-component reference gas atmosphere was investigated. Here, a decrease in the uptake rate with the exposure time could be observed stabilising from the fifth day of exposure onwards. A significant effect of temperature and humidity on the uptake rate was not apparent. The determined uptake rates exhibit uncertainties of < 20 % for 71 substances, and < 10 % for 51 substances which are also in good agreement with the literature, if already published elsewhere. The quantity of investigated substances, the detailed description of the methodology used to determine the uptake rates complemented by the respective uncertainties, as well as the compilation of comparative data, contribute to a better assessment of the quality and relevance of such data, which had not been published before.
KW - Indoor air quality
KW - Volatile organic compounds
KW - Uptake rates
KW - Passive sampling
KW - Tenax TA
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-629913
DO - https://doi.org/10.1016/j.indenv.2025.100095
VL - 2
IS - 2
SP - 1
EP - 11
PB - Elsevier
AN - OPUS4-62991
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sun, Yijuan
A1 - Pérez-Padilla, Víctor
A1 - Valderrey, Virginia
A1 - Bell, Jérémy
A1 - Gawlitza, Kornelia
A1 - Rurack, Knut
T1 - Ratiometric detection of perfluoroalkyl carboxylic acids using dual fluorescent nanoparticles and a miniaturised microfluidic platform
N2 - The widespread contamination of soil and water with perfluoroalkyl substances (PFAS) has caused considerable societal and scientific concern. Legislative measures and an increased need for remediation require effective on-site analytical methods for PFAS management. Here we report on the development of a green-fluorescent guanidine-BODIPY indicator monomer incorporated into a molecularly imprinted polymer (MIP) for the selective detection of perfluorooctanoic acid (PFOA). Complexation of PFOA by the indicator, which is mediated by concerted protonation-induced ion pairing-assisted hydrogen bonding, significantly enhances fluorescence in polar organic solvents. The MIP forms as a thin layer on silica nanoparticles doped with tris(bipyridine)ruthenium(II) chloride, which provides an orange emission signal as internal reference, resulting in low measurement uncertainties. Using a liquid-liquid extraction protocol, this assay enables the direct detection of PFOA in environmental water samples and achieves a detection limit of 0.11 µM. Integration into an opto-microfluidic system enables a compact and user-friendly system for detecting PFOA in less than 15 minutes.
KW - PFAS
KW - Molecular imprinting
KW - Microfluidics
KW - Fluorescence
KW - Onsite assay
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650270
DO - https://doi.org/10.1038/s41467-025-66872-9
SN - 2041-1723
VL - 16
IS - 1
SP - 1
EP - 16
PB - Springer Science and Business Media LLC
AN - OPUS4-65027
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Oskoei, Párástu
A1 - Afonso, Rúben
A1 - Bastos, Verónica
A1 - Nogueira, João
A1 - Keller, Lisa-Marie
A1 - Andresen, Elina
A1 - Saleh, Maysoon I.
A1 - Rühle, Bastian
A1 - Resch-Genger, Ute
A1 - Daniel-da-Silva, Ana L.
A1 - Oliveira, Helena
T1 - Upconversion Nanoparticles with Mesoporous Silica Coatings for Doxorubicin Targeted Delivery to Melanoma Cells
N2 - Melanoma is one of the most aggressive skin cancers and requires innovative therapeutic strategies to overcome the limitations of conventional therapies. In this work, upconversion nanoparticles coated with mesoporous silica and functionalized with folic acid (UCNP@mSiO2-FA) were developed as a targeted nanocarrier system for the delivery of doxorubicin (DOX). The UCNPs were synthesized via thermal decomposition, coated with mesoporous silica shells, and functionalized with folic acid (FA) to enable receptor-mediated targeting. DOX was then loaded into the mesoporous silica coating by adsorption, yielding UCNP@mSiO2-FA-DOX. The different UCNPs were characterized for size, composition, colloidal stability, and loading and release of DOX. This comprehensive physicochemical characterization confirmed a high DOX loading efficiency and a slightly increased drug release under acidic conditions, mimicking the tumour microenvironment. In vitro assays using four melanoma cell lines (A375, B16-F10, MNT-1, and SK-MEL-28) revealed an excellent biocompatibility of UCNP@mSiO2-FA and a significantly higher cytotoxicity of UCNP@mSiO2-FA-DOX compared to unloaded UCNPs, in a dose-dependent manner. Cell cycle analysis demonstrated G2/M phase arrest after treatment with UCNP@mSiO2-FA-DOX, confirming its antiproliferative effect. Overall, UCNP@mSiO2-FA-DOX represents a promising nanoplatform for targeted melanoma therapy, combining active tumour targeting and enhanced anticancer efficacy.
KW - Fluorescence
KW - Synthesis
KW - Nano
KW - Particle
KW - Silica
KW - Cell
KW - Uptake
KW - Drug
KW - Characterization
KW - DOX
KW - Imaging
KW - Toxicity
KW - Release
KW - pH
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653596
DO - https://doi.org/10.3390/molecules31010074
SN - 1420-3049
VL - 31
IS - 1
SP - 1
EP - 18
PB - MDPI AG
AN - OPUS4-65359
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bandow, N.
A1 - Aitken, M. D.
A1 - Geburtig, Anja
A1 - Kalbe, Ute
A1 - Piechotta, Christian
A1 - Schoknecht, Ute
A1 - Simon, Franz-Georg
A1 - Stephan, Ina
T1 - Using Environmental Simulations to Test the Release of Hazardous Substances from Polymer-Based Products: Are Realism and Pragmatism Mutually Exclusive Objectives?
N2 - The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented.
KW - Environmental simulations
KW - Polymer-based products
KW - Artificial weathering
KW - Degradation
KW - Leaching
KW - Soil contact
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509310
DO - https://doi.org/10.3390/ma13122709
SN - 1996-1944
VL - 13
IS - 12
SP - Paper 2709, 22
PB - MDPI
CY - Basel, Switzerland
AN - OPUS4-50931
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rodriguez, Santiago
A1 - Kumanski, Sylvain
A1 - Ayed, Zeineb
A1 - Fournet, Aurélie
A1 - Bouanchaud, Charlène
A1 - Sagar, Amin
A1 - Allemand, Frédéric
A1 - Baulin, Vladimir A.
A1 - Resch‐Genger, Ute
A1 - Cortés, Juan
A1 - Sibille, Nathalie
A1 - Chirot, Fabien
A1 - Wegner, Karl David
A1 - Antoine, Rodolphe
A1 - Le Guével, Xavier
A1 - Bernadó, Pau
T1 - Programming the Optoelectronic Properties of Atomically Precise Gold Nanoclusters Using the Conformational Landscape of Intrinsically Disordered Proteins
N2 - The rational design of hybrid nanomaterials with precisely controlled properties remains a central challenge in materials science. While atomically precise gold nanoclusters (Au‐NCs) offer molecule‐like control over a metallic core, tuning their optoelectronic behavior via surface engineering is often empirically driven. Here, we establish a design principle by demonstrating that the conformational landscape of intrinsically disordered proteins (IDP) can be used as a programmable scaffold to rationally modulate the photophysical properties of a covalently bound Au‐NC. We synthesized a series of bioconjugates between Au 25 nanoclusters and bioengineered IDPs containing a variable number of cysteine anchoring points. A combination of mass spectrometry, small‐angle X‐ray scattering, and modeling on the conjugates indicates that increasing the number of covalent anchors systematically restricts the conformational ensemble, inducing a progressively more compact protein shell around nanoclusters. This structural rigidification at the interface directly translates into a 15‐fold enhancement of the Au‐NC near‐infrared photoluminescence and a six‐fold increase in its average lifetime. Our findings demonstrate that the conformational plasticity of IDPs and the capacity to engineer them can be harnessed as a molecular tuning knob, moving to a new regime of programmable soft‐matter control over the properties of quantum‐confined nanomaterials for tailored biotechnological applications.
KW - Fluorescence
KW - Custer
KW - Nano
KW - Advanced material
KW - Characterization
KW - Fluorescence quantum yield
KW - Integrating sphere spectroscopy
KW - Thiol ligands
KW - Gold
KW - Surface chemistry
KW - SWIR
KW - Mass spectrometry
KW - Protein
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655086
DO - https://doi.org/10.1002/chem.202502991
SN - 0947-6539
SP - 1
EP - 9
PB - Wiley VHC-Verlag
AN - OPUS4-65508
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ahmed, A. A. A.
A1 - Alegret, N.
A1 - Almeida, B.
A1 - Alvarez-Puebla, R.
A1 - Andrews, A. M.
A1 - Ballerini, L.
A1 - Barrios-Capuchino, J. J.
A1 - Becker, C.
A1 - Blick, R. H.
A1 - Bonakdar, S.
A1 - Chakraborty, I.
A1 - Chen, X.
A1 - Cheon, J.
A1 - Chilla, G.
A1 - Conceicao, A. L. C.
A1 - Delehanty, J.
A1 - Dulle, M.
A1 - Efros, A. L.
A1 - Epple, M.
A1 - Fedyk, M.
A1 - Feliu, N.
A1 - Feng, M.
A1 - Fernandez-Chacon, R.
A1 - Fernandez-Cuesta, I.
A1 - Fertig, N.
A1 - Förster, S.
A1 - Garrido, J. A.
A1 - George, M.
A1 - Guse, A. H.
A1 - Hampp, N.
A1 - Harberts, J.
A1 - Han, J.
A1 - Heekeren, H. R.
A1 - Hofmann, U. G.
A1 - Holzapfel, M.
A1 - Hosseinkazemi, H.
A1 - Huang, Y.
A1 - Huber, P.
A1 - Hyeon, T.
A1 - Ingebrandt, S.
A1 - Ienca, M.
A1 - Iske, A.
A1 - Kang, Y.
A1 - Kasieczka, G.
A1 - Kim, D.-H.
A1 - Kostarelos, K.
A1 - Lee, J.-H.
A1 - Lin, K.-W.
A1 - Liu, S.
A1 - Liu, X.
A1 - Liu, Y.
A1 - Lohr, C.
A1 - Mailänder, V.
A1 - Maffongelli, L.
A1 - Megahed, S.
A1 - Mews, A.
A1 - Mutas, M.
A1 - Nack, L.
A1 - Nakatsuka, N.
A1 - Oertner, T. G.
A1 - Offenhäusser, A.
A1 - Oheim, M.
A1 - Otange, B.
A1 - Otto, F.
A1 - Patrono, E.
A1 - Peng, B.
A1 - Picchiotti, A.
A1 - Pierini, F.
A1 - Pötter-Nerger, M.
A1 - Pozzi, M.
A1 - Pralle, A.
A1 - Prato, M.
A1 - Qi, B.
A1 - Ramos-Cabrer, P.
A1 - Resch-Genger, Ute
A1 - Ritter, N.
A1 - Rittner, M.
A1 - Roy, S.
A1 - Santoro, F.
A1 - Schuck, N. W.
A1 - Schulz, F.
A1 - Seker, E.
A1 - Skiba, M.
A1 - Sosniok, M.
A1 - Stephan, H.
A1 - Wang, R.
A1 - Wang, T.
A1 - Wegner, Karl David
A1 - Weiss, P. S.
A1 - Xu, M.
A1 - Yang, C.
A1 - Zargarin, S. S.
A1 - Zeng, Y.
A1 - Zhou, Y.
A1 - Zhu, D.
A1 - Zierold, R.
A1 - Parak, W. J.
T1 - Interfacing with the Brain: How Nanotechnology Can Contribute
N2 - Interfacing artificial devices with the human brain is the central goal of neurotechnology. Yet, our imaginations are often limited by currently available paradigms and technologies. Suggestions for brain−machine interfaces have changed over time, along with the available technology.
Mechanical levers and cable winches were used to move parts of the brain during the mechanical age. Sophisticated electronic wiring and remote control have arisen during the electronic age, ultimately leading to plug-and-play computer interfaces. Nonetheless, our brains are so complex that these visions, until recently, largely remained unreachable dreams. The general problem, thus far, is that most of our technology is mechanically and/or electrically engineered, whereas the brain is a living, dynamic entity. As a result, these worlds are difficult to interface with one another. Nanotechnology, which encompasses engineered solid-state objects and integrated circuits, excels at small length scales of single to a few hundred nanometers and, thus, matches the sizes of biomolecules, biomolecular assemblies, and parts of cells. Consequently, we envision nanomaterials and nanotools as opportunities to interface with the brain in alternative ways. Here, we review the existing literature on the use of nanotechnology in brain−machine interfaces and look forward in discussing perspectives and limitations based on the authors’ expertise across a range of complementary disciplines from neuroscience, engineering, physics, and chemistry to biology and medicine, computer science and mathematics, and social science and jurisprudence. We focus on nanotechnology but also include information from related fields when useful and complementary.
KW - Nanoneuro interface
KW - Brain-on-a-chip
KW - Nanostructured interface
KW - Electrode arrays
KW - Neuro-implants
KW - Advanced nanomaterials
KW - Quality assurance
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634893
DO - https://doi.org/10.1021/acsnano.4c10525
SN - 1936-086X
VL - 19
IS - 11
SP - 10630
EP - 10717
PB - ACS Publications
AN - OPUS4-63489
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - El-Dahshan, O.
A1 - Deniaud, A.
A1 - Ling, W. L.
A1 - Wegner, Karl David
A1 - Proux, O.
A1 - Veronesi, G.
A1 - Reiss, P.
T1 - Hydrothermal microwave synthesis of water soluble NIR-II emitting Ag2S quantum dots
N2 - Hydrothermal-based synthetic methods of quantum dots allow for the exploration of reaction parameters normally inaccessible to typical aqueous-based batch reactions, such as elevated reaction temperatures (>100 °C) and reaction pressures above atmospheric pressure. Coupled with microwave heating, new instantaneously bio-compatible quantum dots (QDs) with enhanced opitcal properties can be yielded. As of today, aqueous-based synthetic methods often lag behind their organic analogues in terms of the photophysical properties of the QDs obtained and the ease of modulation of both the emission wavelength and crystallite size. Using a novel microwave-assisted hydrothermal approach, the synthesis of silver sulphide (Ag2S) QDs exhibiting NIR emission spanning the biological transparency windows via modulation of the reaction parameters has been developed. The intrinsic link between their optical and structural properties is explored via laboratory and synchrotron-based structural analysis techniques. Their toxicity towards a hepatic cell line was assessed, and related back to their structure and size. Overall this work aims to not only further develop the repertoire of synthetic methods for the synthesis of Ag2S QDs, but also paves the way for the development of safer QDs suitable for future clinical applications.
KW - Quantum dots
KW - Microwave synthesis
KW - Quality assurance
KW - NIR-II emission
KW - PL quantum yield
KW - Ag2S
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634825
DO - https://doi.org/10.1039/d5nr00052a
SN - 2040-3372
VL - 17
IS - 24
SP - 14637
EP - 14646
PB - RSC
AN - OPUS4-63482
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Yu, Jialu
A1 - Oelze, Marcus
A1 - Schannor, Mathias
A1 - Nordstad, Simon
A1 - Vogl, Jochen
T1 - New Potential Haematite and Magnetite Reference Materials for Iron Isotope Measurements by Solution Nebulisation MC ‐ ICP ‐ MS and by In Situ ns ‐ LA ‐ MC ‐ ICP ‐ MS
N2 - Iron isotope ratios of haematite (Fe2O3) and magnetite (Fe3O4) provide insights into geochemical, environmental and planetary processes. In most studies, Fe isotope measurements are commonly performed using solution nebulisation multi-collector inductively coupled plasma-mass spectrometry (SN-MC-ICP-MS). Nanosecond laser ablation multi-collector inductively coupled plasma-mass spectrometry (ns-LA-MC-ICP-MS) requires minimal sample preparation, and provides spatially resolved variation of iron isotopes at micro-scale. However, homogeneous and matrix-matched haematite/magnetite reference materials are lacking for precise in situ isotopic measurement. The iron isotope ratios of two potential reference materials resembling natural haematite (HMIE-NP-B01) and natural magnetite (MAKP-NP-B01) were characterised. Size fractions between 5–63 μm of the powdered Fe oxides were milled to nanoparticles, freeze-dried, homogenised, and pressed into pellets. The materials were then evaluated using SN-MC-ICP-MS and LA-MC-ICP-MS. Sample powders of the two materials were measured by SN-MC-ICPMS after sample digestion and column separation and pressed pellets were analysed directly via ns-LA-MC-ICP-MS. In both cases iron isotope delta values are reported relative to the certified reference material IRMM-014, used as the bracketing standard (calibrator). The solution measurements yielded δ56Fe values of -0.25 ± 0.08‰ (N = 13, 2s) for HMIE-NP-B01, and -0.05 ± 0.09‰ (N = 12, 2s) for MAKP-NP-B01, considered as the preferred Fe isotope delta values. In situ isotopic analysis via ns-LA-MC-ICP-MS yielded δ56Fe values of -0.28 ± 0.28‰ (N = 19, 2s) for HMIE-NP-B01 and -0.12 ± 0.24‰ (N = 22, 2s) for MAKP-NP-B01, consistent with the solution Fe isotope data. The homogeneity of Fe isotopes of the pellets was evaluated by ns-LA-MC-ICP-MS analyses of three different positions to further confirm that both materials are isotopically homogeneous. Both materials can be considered as potential quality control and bracketing reference materials for Fe isotopic measurements by in situ ns-LA-MC-ICP-MS analysis.
KW - Laser ablation
KW - Fe isotope
KW - Fe-oxides
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654755
DO - https://doi.org/10.1111/ggr.70037
SN - 1639-4488
SP - 1
EP - 12
PB - John Wiley & Sons Ltd.
AN - OPUS4-65475
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Andresen, Elina
A1 - Islam, Fahima
A1 - Prinz, Carsten
A1 - Gehrmann, P.
A1 - Licha, K.
A1 - Roik, Janina
A1 - Recknagel, Sebastian
A1 - Resch-Genger, Ute
T1 - Assessing the reproducibility and up‑scaling of the synthesis of Er,Yb‑doped NaYF4‑based upconverting nanoparticles and control of size, morphology, and optical properties
N2 - Lanthanide-based, spectrally shifting, and multi-color luminescent upconverting nanoparticles (UCNPs) have received much attention in the last decades because of their applicability as reporter for bioimaging, super-resolution microscopy, and sensing as well as barcoding and anti-counterfeiting tags. A prerequisite for the broad application of UCNPs in areas such as sensing and encoding are simple, robust, and easily upscalable synthesis protocols that yield large quantities of UCNPs with sizes of 20 nm or more with precisely controlled and tunable physicochemical properties from lowcost reagents with a high reproducibility. In this context, we studied the reproducibility, robustness, and upscalability of the synthesis of β-NaYF4:Yb, Er UCNPs via thermal decomposition. Reaction parameters included solvent, precursor chemical compositions, ratio, and concentration. The resulting UCNPs were then examined regarding their application-relevant physicochemical properties such as size, size distribution, morphology, crystal phase, chemical composition, and photoluminescence.
Based on these screening studies, we propose a small volume and high-concentration synthesis approach that can provide UCNPs with different, yet controlled size, an excellent phase purity and tunable morphology in batch sizes of up to at least 5 g which are well suited for the fabrication of sensors, printable barcodes or authentication and recycling tags.
KW - Photoluminescence
KW - Nano
KW - Nanomaterial
KW - Synthesis
KW - Reproducibility
KW - Upconversion nanoparticle
KW - Lanthanide
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570170
DO - https://doi.org/10.1038/s41598-023-28875-8
SN - 2045-2322
VL - 13
IS - 1
SP - 1
EP - 13
AN - OPUS4-57017
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Grimmer, Christoph
A1 - Richter, Matthias
A1 - Neuhaus, T.
A1 - Prinz, Carsten
A1 - Strzelczyk, Rebecca Skadi
A1 - Colakoglu, Irem
A1 - Horn, Wolfgang
T1 - Towards a multi-VOC emission reference material with temporally constant emission profile for QA/QC of materials emission testing procedures
N2 - Emission reference materials (ERMs) are sought after to further control and improve indoor air quality. The impregnation of porous materials with volatile organic compounds (VOCs) is a promising approach to produce ERMs. Different VOCs were used to impregnate various porous materials (mainly zeolites, activated carbons and a metal organic framework). The influence of different methodological parameters and material properties were studied to optimize the impregnation procedure and to find the best material/VOC combination. The impregnation procedure remains quite irreproducible, nevertheless, very good ERM candidates were identified. Two materials (zeolite 4 and AC 1 impregnated with n-hexadecane) showed a very stable emission over 14 days (<10 % change). Another material (AC 1 impregnated with toluene) showed a declining emission profile but with a very good in-batch reproducibility and a storage stability of up to 12 months.
KW - Emission reference material
KW - Porous materials
KW - Indoor air quality
KW - Emission test chamber
KW - CO2 assisted impregnation
KW - EN 16516
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612238
DO - https://doi.org/10.1016/j.chemosphere.2024.143437
SN - 1879-1298
VL - 366
SP - 1
EP - 8
PB - Elsevier
AN - OPUS4-61223
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Habibimarkani, Heydar
A1 - Abram, Sarah-Luise
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Prinz, Carsten
A1 - Sahre, Mario
A1 - Hodoroaba, Vasile-Dan
A1 - Radnik, Jörg
T1 - In-depth analysis of FeNi-based nanoparticles for the oxygen evolution reaction
N2 - This study investigates the effect of varying iron-to-nickel ratios on the catalytic performance of Fe-Ni oxide nanoparticles (NPs) for the oxygen evolution reaction (OER). Addressing the issue of high energy wastage due to large overpotentials in OER, we synthesized and characterized different NP catalysts with different Fe: Ni oxide ratios. Transmission Electron Microscopy (TEM), Energy Dispersive X-ray Spectroscopy (EDS), and X-ray Diffraction (XRD) were employed to determine the morphology, elemental and phase composition of the NPs. Furthermore, in-depth profiling with X-ray Photoelectron Spectroscopy (XPS) and Hard X-ray Photoelectron Spectroscopy (HAXPES) revealed that iron predominantly exists as oxide, while nickel exhibits both metallic and oxidic forms depending on the Fe content. XPS indicated an enrichment of iron at the NP surface, whereas HAXPES and EDS data agreed on the bulk stoichiometry. The assessment of the catalytic activity via cyclic voltammetry (CV) showed that the Fe: Ni ratio of 2:3 exhibited superior performance, characterized by lower overpotential and a smaller Tafel slope.
KW - Fe-Ni oxide
KW - Nanoparticles
KW - OER
KW - Catalytic performance
KW - Cyclic voltammetry
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626932
UR - https://www.nature.com/articles/s41598-025-92720-3
DO - https://doi.org/10.1038/s41598-025-92720-3
VL - 15
IS - 1
SP - 1
EP - 17
PB - Springer Nature
AN - OPUS4-62693
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Epping, Ruben
A1 - Falkenhagen, Jana
A1 - Panne, Ulrich
A1 - Hiller, W.
A1 - Gruendling, T.
A1 - Staal, B.
A1 - Lang, C.
A1 - Lamprou, A.
T1 - Simultaneous characterization of poly(acrylic acid) andpolysaccharide polymers and copolymers
N2 - Copolymer products that result from grafting acrylic acid and other hydrophilicmonomers onto polysaccharides have recently gained significant interest in researchand industry. Originating from renewable sources, these biodegradable, low toxicity,and polar copolymer products exhibit potential to replace polymers from fossil sourcesin several applications and industries. The methods usually employed to character-ize these copolymers are, however, quite limited, especially for the measurement ofbulk properties. With more sophisticated applications, for example, in pharmaceu-tics requiring a more detailed analysis of the chemical structure, we describe a newapproach for this kind of complex polymers. Our approach utilizes chromatographyin combination with several detection methods to separate and characterize reactionproducts of the copolymerization of acrylic acid and chemically hydrolyzed starch.These samples consisted of a mixture of homopolymer poly (acrylic acid), homopoly-mer hydrolyzed starch, and – in a lower amount – the formed copolymers. Several chro-matographic methods exist that are capable of characterizing either poly (acrylic acid)or hydrolyzed starch. In contrast, our approach offers simultaneous characterization ofboth polymers. The combination of LC and UV/RI offered insight into the compositionand copolymer content of the samples. Size exclusion chromatography experimentsrevealed the molar mass distribution of homopolymers and copolymers. FTIR inves-tigations confirmed the formation of copolymers while ESI-MS gave more details onthe end groups of hydrolyzed starches and poly (acrylic acids). Evidence of copolymerstructures was obtained through NMR measurements. Finally, two-dimensional chro-matography led to the separation of the copolymers from both homopolymers as wellas the additional separation of sodium clusters. The methods described in this work area powerful toolset to characterize copolymerization products of hydrolyzed starch andpoly(acrylic acid). Together, our approach successfully correlates the physicochemicalproperties of such complex mixtures with their actual composition.
KW - 2D chromatography
KW - LC-MS
KW - SEC
KW - Renewable copolymers
KW - Grafting
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-508873
DO - https://doi.org/10.1002/ansa.202000044
SP - 1
EP - 12
PB - Wiley-VCH Verlag-GmbH&Co. KGaA
CY - Weinheim
AN - OPUS4-50887
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scholl, Juliane
A1 - Lisec, Jan
A1 - Haase, Hajo
A1 - Koch, Matthias
T1 - Identification of transformation products from fluorinated lithium-ion battery additives TPFPB and TPFPP: forever chemicals of tomorrow?
N2 - AbstractFluorinated organic compounds (FOCs) represent a class of synthetic chemicals distinguished by their resilient carbon–fluorine bonds, which demonstrate an ability to withstand environmental degradation over an extended period. The integration of FOCs into cutting-edge applications, including lithium-ion batteries (LiBs), presents considerable potential for environmental harm that has not yet been sufficiently addressed. This study focuses on the environmental fate of two fluorinated aromatics, tris(pentafluorophenyl)borane (TPFPB) and tris(pentafluorophenyl)phosphine (TPFPP), given their important role in improving the performance of LiBs. To achieve this, laboratory simulation methods including total oxidizable precursor assay, electrochemistry (EC), Fenton reaction, UV-C irradiation, and hydrolysis were employed. Liquid chromatography and gas chromatography coupled with high-resolution mass spectrometry were used for identification of transformation products (TPs) and prediction of their molecular formulae. Despite the structural similarity between TPFPB and TPFPP, distinct differences in electrochemical behavior and degradation pathways were observed. TPFPB readily underwent hydroxylation and hydrolysis, resulting in a wide range of 49 TPs. A total of 28 TPs were newly identified, including oligomers and highly toxic dioxins. In contrast, TPFPP degraded exclusively under harsh conditions, requiring the development of innovative conditioning protocols for EC. In total, the simulation experiments yielded nine structurally different compounds, including seven previously undescribed, partially defluorinated TPs. This study highlights the potential risks associated with the use of FOCs in LiBs and provides insight into the complex environmental behavior of FOCs.
KW - Mass Spectrometry
KW - LiBs
KW - POPs
KW - Transformation products
KW - Electrochemistry
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-611339
DO - https://doi.org/10.1007/s00216-024-05526-z
SP - 1
EP - 15
PB - Springer Science and Business Media LLC
AN - OPUS4-61133
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -