TY - JOUR
A1 - Bandow, N.
A1 - Aitken, M. D.
A1 - Geburtig, Anja
A1 - Kalbe, Ute
A1 - Piechotta, Christian
A1 - Schoknecht, Ute
A1 - Simon, Franz-Georg
A1 - Stephan, Ina
T1 - Using Environmental Simulations to Test the Release of Hazardous Substances from Polymer-Based Products: Are Realism and Pragmatism Mutually Exclusive Objectives?
N2 - The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented.
KW - Environmental simulations
KW - Polymer-based products
KW - Artificial weathering
KW - Degradation
KW - Leaching
KW - Soil contact
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509310
DO - https://doi.org/10.3390/ma13122709
SN - 1996-1944
VL - 13
IS - 12
SP - Paper 2709, 22
PB - MDPI
CY - Basel, Switzerland
AN - OPUS4-50931
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rodriguez, Santiago
A1 - Kumanski, Sylvain
A1 - Ayed, Zeineb
A1 - Fournet, Aurélie
A1 - Bouanchaud, Charlène
A1 - Sagar, Amin
A1 - Allemand, Frédéric
A1 - Baulin, Vladimir A.
A1 - Resch‐Genger, Ute
A1 - Cortés, Juan
A1 - Sibille, Nathalie
A1 - Chirot, Fabien
A1 - Wegner, Karl David
A1 - Antoine, Rodolphe
A1 - Le Guével, Xavier
A1 - Bernadó, Pau
T1 - Programming the Optoelectronic Properties of Atomically Precise Gold Nanoclusters Using the Conformational Landscape of Intrinsically Disordered Proteins
N2 - The rational design of hybrid nanomaterials with precisely controlled properties remains a central challenge in materials science. While atomically precise gold nanoclusters (Au‐NCs) offer molecule‐like control over a metallic core, tuning their optoelectronic behavior via surface engineering is often empirically driven. Here, we establish a design principle by demonstrating that the conformational landscape of intrinsically disordered proteins (IDP) can be used as a programmable scaffold to rationally modulate the photophysical properties of a covalently bound Au‐NC. We synthesized a series of bioconjugates between Au 25 nanoclusters and bioengineered IDPs containing a variable number of cysteine anchoring points. A combination of mass spectrometry, small‐angle X‐ray scattering, and modeling on the conjugates indicates that increasing the number of covalent anchors systematically restricts the conformational ensemble, inducing a progressively more compact protein shell around nanoclusters. This structural rigidification at the interface directly translates into a 15‐fold enhancement of the Au‐NC near‐infrared photoluminescence and a six‐fold increase in its average lifetime. Our findings demonstrate that the conformational plasticity of IDPs and the capacity to engineer them can be harnessed as a molecular tuning knob, moving to a new regime of programmable soft‐matter control over the properties of quantum‐confined nanomaterials for tailored biotechnological applications.
KW - Fluorescence
KW - Custer
KW - Nano
KW - Advanced material
KW - Characterization
KW - Fluorescence quantum yield
KW - Integrating sphere spectroscopy
KW - Thiol ligands
KW - Gold
KW - Surface chemistry
KW - SWIR
KW - Mass spectrometry
KW - Protein
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655086
DO - https://doi.org/10.1002/chem.202502991
SN - 0947-6539
SP - 1
EP - 9
PB - Wiley VHC-Verlag
AN - OPUS4-65508
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ahmed, A. A. A.
A1 - Alegret, N.
A1 - Almeida, B.
A1 - Alvarez-Puebla, R.
A1 - Andrews, A. M.
A1 - Ballerini, L.
A1 - Barrios-Capuchino, J. J.
A1 - Becker, C.
A1 - Blick, R. H.
A1 - Bonakdar, S.
A1 - Chakraborty, I.
A1 - Chen, X.
A1 - Cheon, J.
A1 - Chilla, G.
A1 - Conceicao, A. L. C.
A1 - Delehanty, J.
A1 - Dulle, M.
A1 - Efros, A. L.
A1 - Epple, M.
A1 - Fedyk, M.
A1 - Feliu, N.
A1 - Feng, M.
A1 - Fernandez-Chacon, R.
A1 - Fernandez-Cuesta, I.
A1 - Fertig, N.
A1 - Förster, S.
A1 - Garrido, J. A.
A1 - George, M.
A1 - Guse, A. H.
A1 - Hampp, N.
A1 - Harberts, J.
A1 - Han, J.
A1 - Heekeren, H. R.
A1 - Hofmann, U. G.
A1 - Holzapfel, M.
A1 - Hosseinkazemi, H.
A1 - Huang, Y.
A1 - Huber, P.
A1 - Hyeon, T.
A1 - Ingebrandt, S.
A1 - Ienca, M.
A1 - Iske, A.
A1 - Kang, Y.
A1 - Kasieczka, G.
A1 - Kim, D.-H.
A1 - Kostarelos, K.
A1 - Lee, J.-H.
A1 - Lin, K.-W.
A1 - Liu, S.
A1 - Liu, X.
A1 - Liu, Y.
A1 - Lohr, C.
A1 - Mailänder, V.
A1 - Maffongelli, L.
A1 - Megahed, S.
A1 - Mews, A.
A1 - Mutas, M.
A1 - Nack, L.
A1 - Nakatsuka, N.
A1 - Oertner, T. G.
A1 - Offenhäusser, A.
A1 - Oheim, M.
A1 - Otange, B.
A1 - Otto, F.
A1 - Patrono, E.
A1 - Peng, B.
A1 - Picchiotti, A.
A1 - Pierini, F.
A1 - Pötter-Nerger, M.
A1 - Pozzi, M.
A1 - Pralle, A.
A1 - Prato, M.
A1 - Qi, B.
A1 - Ramos-Cabrer, P.
A1 - Resch-Genger, Ute
A1 - Ritter, N.
A1 - Rittner, M.
A1 - Roy, S.
A1 - Santoro, F.
A1 - Schuck, N. W.
A1 - Schulz, F.
A1 - Seker, E.
A1 - Skiba, M.
A1 - Sosniok, M.
A1 - Stephan, H.
A1 - Wang, R.
A1 - Wang, T.
A1 - Wegner, Karl David
A1 - Weiss, P. S.
A1 - Xu, M.
A1 - Yang, C.
A1 - Zargarin, S. S.
A1 - Zeng, Y.
A1 - Zhou, Y.
A1 - Zhu, D.
A1 - Zierold, R.
A1 - Parak, W. J.
T1 - Interfacing with the Brain: How Nanotechnology Can Contribute
N2 - Interfacing artificial devices with the human brain is the central goal of neurotechnology. Yet, our imaginations are often limited by currently available paradigms and technologies. Suggestions for brain−machine interfaces have changed over time, along with the available technology.
Mechanical levers and cable winches were used to move parts of the brain during the mechanical age. Sophisticated electronic wiring and remote control have arisen during the electronic age, ultimately leading to plug-and-play computer interfaces. Nonetheless, our brains are so complex that these visions, until recently, largely remained unreachable dreams. The general problem, thus far, is that most of our technology is mechanically and/or electrically engineered, whereas the brain is a living, dynamic entity. As a result, these worlds are difficult to interface with one another. Nanotechnology, which encompasses engineered solid-state objects and integrated circuits, excels at small length scales of single to a few hundred nanometers and, thus, matches the sizes of biomolecules, biomolecular assemblies, and parts of cells. Consequently, we envision nanomaterials and nanotools as opportunities to interface with the brain in alternative ways. Here, we review the existing literature on the use of nanotechnology in brain−machine interfaces and look forward in discussing perspectives and limitations based on the authors’ expertise across a range of complementary disciplines from neuroscience, engineering, physics, and chemistry to biology and medicine, computer science and mathematics, and social science and jurisprudence. We focus on nanotechnology but also include information from related fields when useful and complementary.
KW - Nanoneuro interface
KW - Brain-on-a-chip
KW - Nanostructured interface
KW - Electrode arrays
KW - Neuro-implants
KW - Advanced nanomaterials
KW - Quality assurance
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634893
DO - https://doi.org/10.1021/acsnano.4c10525
SN - 1936-086X
VL - 19
IS - 11
SP - 10630
EP - 10717
PB - ACS Publications
AN - OPUS4-63489
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - El-Dahshan, O.
A1 - Deniaud, A.
A1 - Ling, W. L.
A1 - Wegner, Karl David
A1 - Proux, O.
A1 - Veronesi, G.
A1 - Reiss, P.
T1 - Hydrothermal microwave synthesis of water soluble NIR-II emitting Ag2S quantum dots
N2 - Hydrothermal-based synthetic methods of quantum dots allow for the exploration of reaction parameters normally inaccessible to typical aqueous-based batch reactions, such as elevated reaction temperatures (>100 °C) and reaction pressures above atmospheric pressure. Coupled with microwave heating, new instantaneously bio-compatible quantum dots (QDs) with enhanced opitcal properties can be yielded. As of today, aqueous-based synthetic methods often lag behind their organic analogues in terms of the photophysical properties of the QDs obtained and the ease of modulation of both the emission wavelength and crystallite size. Using a novel microwave-assisted hydrothermal approach, the synthesis of silver sulphide (Ag2S) QDs exhibiting NIR emission spanning the biological transparency windows via modulation of the reaction parameters has been developed. The intrinsic link between their optical and structural properties is explored via laboratory and synchrotron-based structural analysis techniques. Their toxicity towards a hepatic cell line was assessed, and related back to their structure and size. Overall this work aims to not only further develop the repertoire of synthetic methods for the synthesis of Ag2S QDs, but also paves the way for the development of safer QDs suitable for future clinical applications.
KW - Quantum dots
KW - Microwave synthesis
KW - Quality assurance
KW - NIR-II emission
KW - PL quantum yield
KW - Ag2S
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634825
DO - https://doi.org/10.1039/d5nr00052a
SN - 2040-3372
VL - 17
IS - 24
SP - 14637
EP - 14646
PB - RSC
AN - OPUS4-63482
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Yu, Jialu
A1 - Oelze, Marcus
A1 - Schannor, Mathias
A1 - Nordstad, Simon
A1 - Vogl, Jochen
T1 - New Potential Haematite and Magnetite Reference Materials for Iron Isotope Measurements by Solution Nebulisation MC ‐ ICP ‐ MS and by In Situ ns ‐ LA ‐ MC ‐ ICP ‐ MS
N2 - Iron isotope ratios of haematite (Fe2O3) and magnetite (Fe3O4) provide insights into geochemical, environmental and planetary processes. In most studies, Fe isotope measurements are commonly performed using solution nebulisation multi-collector inductively coupled plasma-mass spectrometry (SN-MC-ICP-MS). Nanosecond laser ablation multi-collector inductively coupled plasma-mass spectrometry (ns-LA-MC-ICP-MS) requires minimal sample preparation, and provides spatially resolved variation of iron isotopes at micro-scale. However, homogeneous and matrix-matched haematite/magnetite reference materials are lacking for precise in situ isotopic measurement. The iron isotope ratios of two potential reference materials resembling natural haematite (HMIE-NP-B01) and natural magnetite (MAKP-NP-B01) were characterised. Size fractions between 5–63 μm of the powdered Fe oxides were milled to nanoparticles, freeze-dried, homogenised, and pressed into pellets. The materials were then evaluated using SN-MC-ICP-MS and LA-MC-ICP-MS. Sample powders of the two materials were measured by SN-MC-ICPMS after sample digestion and column separation and pressed pellets were analysed directly via ns-LA-MC-ICP-MS. In both cases iron isotope delta values are reported relative to the certified reference material IRMM-014, used as the bracketing standard (calibrator). The solution measurements yielded δ56Fe values of -0.25 ± 0.08‰ (N = 13, 2s) for HMIE-NP-B01, and -0.05 ± 0.09‰ (N = 12, 2s) for MAKP-NP-B01, considered as the preferred Fe isotope delta values. In situ isotopic analysis via ns-LA-MC-ICP-MS yielded δ56Fe values of -0.28 ± 0.28‰ (N = 19, 2s) for HMIE-NP-B01 and -0.12 ± 0.24‰ (N = 22, 2s) for MAKP-NP-B01, consistent with the solution Fe isotope data. The homogeneity of Fe isotopes of the pellets was evaluated by ns-LA-MC-ICP-MS analyses of three different positions to further confirm that both materials are isotopically homogeneous. Both materials can be considered as potential quality control and bracketing reference materials for Fe isotopic measurements by in situ ns-LA-MC-ICP-MS analysis.
KW - Laser ablation
KW - Fe isotope
KW - Fe-oxides
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654755
DO - https://doi.org/10.1111/ggr.70037
SN - 1639-4488
SP - 1
EP - 12
PB - John Wiley & Sons Ltd.
AN - OPUS4-65475
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Andresen, Elina
A1 - Islam, Fahima
A1 - Prinz, Carsten
A1 - Gehrmann, P.
A1 - Licha, K.
A1 - Roik, Janina
A1 - Recknagel, Sebastian
A1 - Resch-Genger, Ute
T1 - Assessing the reproducibility and up‑scaling of the synthesis of Er,Yb‑doped NaYF4‑based upconverting nanoparticles and control of size, morphology, and optical properties
N2 - Lanthanide-based, spectrally shifting, and multi-color luminescent upconverting nanoparticles (UCNPs) have received much attention in the last decades because of their applicability as reporter for bioimaging, super-resolution microscopy, and sensing as well as barcoding and anti-counterfeiting tags. A prerequisite for the broad application of UCNPs in areas such as sensing and encoding are simple, robust, and easily upscalable synthesis protocols that yield large quantities of UCNPs with sizes of 20 nm or more with precisely controlled and tunable physicochemical properties from lowcost reagents with a high reproducibility. In this context, we studied the reproducibility, robustness, and upscalability of the synthesis of β-NaYF4:Yb, Er UCNPs via thermal decomposition. Reaction parameters included solvent, precursor chemical compositions, ratio, and concentration. The resulting UCNPs were then examined regarding their application-relevant physicochemical properties such as size, size distribution, morphology, crystal phase, chemical composition, and photoluminescence.
Based on these screening studies, we propose a small volume and high-concentration synthesis approach that can provide UCNPs with different, yet controlled size, an excellent phase purity and tunable morphology in batch sizes of up to at least 5 g which are well suited for the fabrication of sensors, printable barcodes or authentication and recycling tags.
KW - Photoluminescence
KW - Nano
KW - Nanomaterial
KW - Synthesis
KW - Reproducibility
KW - Upconversion nanoparticle
KW - Lanthanide
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570170
DO - https://doi.org/10.1038/s41598-023-28875-8
SN - 2045-2322
VL - 13
IS - 1
SP - 1
EP - 13
AN - OPUS4-57017
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Grimmer, Christoph
A1 - Richter, Matthias
A1 - Neuhaus, T.
A1 - Prinz, Carsten
A1 - Strzelczyk, Rebecca Skadi
A1 - Colakoglu, Irem
A1 - Horn, Wolfgang
T1 - Towards a multi-VOC emission reference material with temporally constant emission profile for QA/QC of materials emission testing procedures
N2 - Emission reference materials (ERMs) are sought after to further control and improve indoor air quality. The impregnation of porous materials with volatile organic compounds (VOCs) is a promising approach to produce ERMs. Different VOCs were used to impregnate various porous materials (mainly zeolites, activated carbons and a metal organic framework). The influence of different methodological parameters and material properties were studied to optimize the impregnation procedure and to find the best material/VOC combination. The impregnation procedure remains quite irreproducible, nevertheless, very good ERM candidates were identified. Two materials (zeolite 4 and AC 1 impregnated with n-hexadecane) showed a very stable emission over 14 days (<10 % change). Another material (AC 1 impregnated with toluene) showed a declining emission profile but with a very good in-batch reproducibility and a storage stability of up to 12 months.
KW - Emission reference material
KW - Porous materials
KW - Indoor air quality
KW - Emission test chamber
KW - CO2 assisted impregnation
KW - EN 16516
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612238
DO - https://doi.org/10.1016/j.chemosphere.2024.143437
SN - 1879-1298
VL - 366
SP - 1
EP - 8
PB - Elsevier
AN - OPUS4-61223
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Habibimarkani, Heydar
A1 - Abram, Sarah-Luise
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Prinz, Carsten
A1 - Sahre, Mario
A1 - Hodoroaba, Vasile-Dan
A1 - Radnik, Jörg
T1 - In-depth analysis of FeNi-based nanoparticles for the oxygen evolution reaction
N2 - This study investigates the effect of varying iron-to-nickel ratios on the catalytic performance of Fe-Ni oxide nanoparticles (NPs) for the oxygen evolution reaction (OER). Addressing the issue of high energy wastage due to large overpotentials in OER, we synthesized and characterized different NP catalysts with different Fe: Ni oxide ratios. Transmission Electron Microscopy (TEM), Energy Dispersive X-ray Spectroscopy (EDS), and X-ray Diffraction (XRD) were employed to determine the morphology, elemental and phase composition of the NPs. Furthermore, in-depth profiling with X-ray Photoelectron Spectroscopy (XPS) and Hard X-ray Photoelectron Spectroscopy (HAXPES) revealed that iron predominantly exists as oxide, while nickel exhibits both metallic and oxidic forms depending on the Fe content. XPS indicated an enrichment of iron at the NP surface, whereas HAXPES and EDS data agreed on the bulk stoichiometry. The assessment of the catalytic activity via cyclic voltammetry (CV) showed that the Fe: Ni ratio of 2:3 exhibited superior performance, characterized by lower overpotential and a smaller Tafel slope.
KW - Fe-Ni oxide
KW - Nanoparticles
KW - OER
KW - Catalytic performance
KW - Cyclic voltammetry
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626932
UR - https://www.nature.com/articles/s41598-025-92720-3
DO - https://doi.org/10.1038/s41598-025-92720-3
VL - 15
IS - 1
SP - 1
EP - 17
PB - Springer Nature
AN - OPUS4-62693
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Epping, Ruben
A1 - Falkenhagen, Jana
A1 - Panne, Ulrich
A1 - Hiller, W.
A1 - Gruendling, T.
A1 - Staal, B.
A1 - Lang, C.
A1 - Lamprou, A.
T1 - Simultaneous characterization of poly(acrylic acid) andpolysaccharide polymers and copolymers
N2 - Copolymer products that result from grafting acrylic acid and other hydrophilicmonomers onto polysaccharides have recently gained significant interest in researchand industry. Originating from renewable sources, these biodegradable, low toxicity,and polar copolymer products exhibit potential to replace polymers from fossil sourcesin several applications and industries. The methods usually employed to character-ize these copolymers are, however, quite limited, especially for the measurement ofbulk properties. With more sophisticated applications, for example, in pharmaceu-tics requiring a more detailed analysis of the chemical structure, we describe a newapproach for this kind of complex polymers. Our approach utilizes chromatographyin combination with several detection methods to separate and characterize reactionproducts of the copolymerization of acrylic acid and chemically hydrolyzed starch.These samples consisted of a mixture of homopolymer poly (acrylic acid), homopoly-mer hydrolyzed starch, and – in a lower amount – the formed copolymers. Several chro-matographic methods exist that are capable of characterizing either poly (acrylic acid)or hydrolyzed starch. In contrast, our approach offers simultaneous characterization ofboth polymers. The combination of LC and UV/RI offered insight into the compositionand copolymer content of the samples. Size exclusion chromatography experimentsrevealed the molar mass distribution of homopolymers and copolymers. FTIR inves-tigations confirmed the formation of copolymers while ESI-MS gave more details onthe end groups of hydrolyzed starches and poly (acrylic acids). Evidence of copolymerstructures was obtained through NMR measurements. Finally, two-dimensional chro-matography led to the separation of the copolymers from both homopolymers as wellas the additional separation of sodium clusters. The methods described in this work area powerful toolset to characterize copolymerization products of hydrolyzed starch andpoly(acrylic acid). Together, our approach successfully correlates the physicochemicalproperties of such complex mixtures with their actual composition.
KW - 2D chromatography
KW - LC-MS
KW - SEC
KW - Renewable copolymers
KW - Grafting
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-508873
DO - https://doi.org/10.1002/ansa.202000044
SP - 1
EP - 12
PB - Wiley-VCH Verlag-GmbH&Co. KGaA
CY - Weinheim
AN - OPUS4-50887
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scholl, Juliane
A1 - Lisec, Jan
A1 - Haase, Hajo
A1 - Koch, Matthias
T1 - Identification of transformation products from fluorinated lithium-ion battery additives TPFPB and TPFPP: forever chemicals of tomorrow?
N2 - AbstractFluorinated organic compounds (FOCs) represent a class of synthetic chemicals distinguished by their resilient carbon–fluorine bonds, which demonstrate an ability to withstand environmental degradation over an extended period. The integration of FOCs into cutting-edge applications, including lithium-ion batteries (LiBs), presents considerable potential for environmental harm that has not yet been sufficiently addressed. This study focuses on the environmental fate of two fluorinated aromatics, tris(pentafluorophenyl)borane (TPFPB) and tris(pentafluorophenyl)phosphine (TPFPP), given their important role in improving the performance of LiBs. To achieve this, laboratory simulation methods including total oxidizable precursor assay, electrochemistry (EC), Fenton reaction, UV-C irradiation, and hydrolysis were employed. Liquid chromatography and gas chromatography coupled with high-resolution mass spectrometry were used for identification of transformation products (TPs) and prediction of their molecular formulae. Despite the structural similarity between TPFPB and TPFPP, distinct differences in electrochemical behavior and degradation pathways were observed. TPFPB readily underwent hydroxylation and hydrolysis, resulting in a wide range of 49 TPs. A total of 28 TPs were newly identified, including oligomers and highly toxic dioxins. In contrast, TPFPP degraded exclusively under harsh conditions, requiring the development of innovative conditioning protocols for EC. In total, the simulation experiments yielded nine structurally different compounds, including seven previously undescribed, partially defluorinated TPs. This study highlights the potential risks associated with the use of FOCs in LiBs and provides insight into the complex environmental behavior of FOCs.
KW - Mass Spectrometry
KW - LiBs
KW - POPs
KW - Transformation products
KW - Electrochemistry
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-611339
DO - https://doi.org/10.1007/s00216-024-05526-z
SP - 1
EP - 15
PB - Springer Science and Business Media LLC
AN - OPUS4-61133
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Meiers, Emelie
A1 - Scholl, Juliane
A1 - Droas, Morten
A1 - Vogel, Christian
A1 - Leube, Peter
A1 - Sommerfeld, Thomas
A1 - Bagheri, A.
A1 - Adam, Christian
A1 - Seubert, A.
A1 - Koch, Matthias
T1 - Development and evaluation of analytical strategies for the monitoring of per- and polyfluoroalkyl substances from lithium-ion battery recycling materials
N2 - Per- and polyfluoroalkyl substances (PFAS) are well-known as “forever chemicals” and persistent pollutants released by different anthropogenic sources. The potential release of PFAS from accumulating electronic waste and lithium-ion battery (LIB) recycling activities has gained increasing attention in the past years. This creates a need for analytical methods tailored for the determination of PFAS out of environmental matrices related to the named activities or directly out of the concerned materials. In this work, analytical strategies for the monitoring of PFAS in LIB recycling materials were explored for a group of legacy perfluoro sulfonic- and carbonic acids (PFSA and PFCA) and of fluorinated sulfonylimides suspected to be LIB electrolyte ingredients. These analytical strategies comprehend PFAS target approaches with a herein optimized liquid chromatography tandem mass spectrometry (LC–MS/MS) method equipped with a HILIC (hydrophilic interaction liquid chromatography) column in combination with the TOP (total oxidizable precursor) assay and an adapted sample preparation method for high-matrix LIB recycling materials. The validated target method was applied to a set of LIB recycling materials: end-of-life batteries, black masses from hydrometallurgical recycling, and gas absorption solutions from thermal treatment of black masses as part of the recycling procedure. Investigation results show that the LIB industry can be connected to the release of both “LIB”-PFAS, such as the target sulfonylimides, and “already-legacy” PFAS, like the PFSA and PFCA. Especially, the presence of trifluoroacetic acid (TFA) as an emerging pollutant in every investigated LIB material type underlines the threat of PFAS emissions from LIB waste and recycling activities.
KW - Per- and polyfluoroalkyl substances (PFAS)
KW - Battery
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-647015
DO - https://doi.org/10.1007/s00216-025-06165-8
SN - 1618-2642
VL - 417
SP - 6567
EP - 6583
PB - Springer Science and Business Media LLC
AN - OPUS4-64701
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scholl, Juliane
A1 - Lisec, Jan
A1 - Bagheri, Abbas
A1 - Meiers, Emelie
A1 - Russo, Francesco Friedrich
A1 - Haase, Hajo
A1 - Koch, Matthias
T1 - Unveiling aging mechanisms of electrolytes in commercial end-of-life lithium-ion batteries
N2 - In this study, 77 end-of-life (EOL) commercial lithium-ion batteries (LIBs) of various formats were systematically analyzed to investigate electrolyte degradation and the influence of pristine electrolyte compositions on aging behavior. Comprehensive chemical characterization was conducted using targeted and non-targeted mass spectrometry (MS), employing LC-MS/MS, GC-MS, and high-resolution MS (HRMS). This integrated approach enabled the identification of confirmed pristine components and complex degradation products. The results show that rechargeable pouch and cylindrical cells often deviate from conventional model systems, containing mixed lithium salt anions, ionic liquids (ILs), and high concentrations of triflates, triflimides, and bis(fluorosulfonyl)imide (FSI). These function as solvents, salts, or safety-enhancing additives. Specific IL degradation products were identified, and hypotheses formulated on previously unreported pathways. Furthermore, a novel series of oligomerization products of propylene carbonate (PC) was detected. In contrast, non-rechargeable coin cells revealed widespread use of per- and polyfluoroalkyl substances (PFAS) in their original electrolytes. Based on ex situ analyses, hypothetical PFAS degradation mechanisms are proposed here for the first time. The absence of carbonate oligomers and lithium salt-derived products, alongside the presence of standard carbonates, indicates lithium counterion coordination as a key factor in Lewis acid-catalyzed degradation. This study offers valuable insights into real-world battery aging.
KW - Transformation products
KW - Lithium-ion batteries
KW - Fluorinated Compounds
KW - Gas chromatography/ QTOF-MS
KW - HILIC-LC-MS/MS
KW - PFAS
KW - Electrochemistry
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-644991
DO - https://doi.org/10.1016/j.jpowsour.2025.238613
SN - 0378-7753
VL - 661
SP - 1
EP - 10
PB - Elsevier B.V.
AN - OPUS4-64499
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Prakash, Swayam
A1 - Bell, Jérémy
A1 - Rurack, Knut
T1 - Rapid Onsite Detection of Fecal Contamination in Water Using a Portable Fluorometric Assay
N2 - Fecal pollution in water poses significant health risks, especially when contaminated sources are used for drinking and food production. Traditional water quality testing methods are expensive, slow, and require skilled personnel, limiting their accessibility. This work addresses these issues by developing a portable fluorometric assay for the detection of the fecal indicator pigment urobilin (UB). The assay uses silane-functionalized glass fiber strips impregnated with zinc chloride, providing a ‘drop-&-detect’ approach with enhanced fluorescence response mediated by the unique complexation properties of ZnCl2 and UB. This approach allows for the detection of UB at sub-nanomolar concentrations in less than 1 min using a 3D-printed setup with miniaturized optical components powered by a smartphone with its camera as a detector. The results validated with a benchtop fluorometer show the effectiveness of this method. The successful application of this userfriendly, rapid, and sensitive assay to real water samples from three rivers and the influx and efflux of a wastewater treatment plant advances field-based water quality monitoring, meets the WHO’s ASSURED criteria, and supports progress toward the global clean water and sanitation goals.
KW - Fecal pigment
KW - Fluorescence
KW - Signal amplification
KW - Surface chemistry
KW - Water quality testing
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655543
DO - https://doi.org/10.1021/acssensors.5c03922
SN - 2379-3694
VL - 11
SP - 1
EP - 9
PB - American Chemical Society
CY - Washington, D.C.
AN - OPUS4-65554
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Lisec, Jan
A1 - Recknagel, Sebastian
A1 - Prinz, Carsten
A1 - Vogel, Kristin
A1 - Koch, Matthias
A1 - Becker, Roland
T1 - eCerto—versatile software for interlaboratory data evaluation and documentation during reference material production
N2 - The statistical tool eCerto was developed for the evaluation of measurement data to assign property values and associated uncertainties of reference materials. The analysis is based on collaborative studies of expert laboratories and was implemented using the R software environment. Emphasis was put on comparability of eCerto with SoftCRM, a statistical tool based on the certification strategy of the former Community Bureau of Reference. Additionally, special attention was directed towards easy usability from data collection through processing, archiving, and reporting. While the effects of outlier removal can be flexibly explored, eCerto always retains the original data set and any manipulation such as outlier removal is (graphically and tabularly) documented adequately in the report. As a major reference materials producer, the Bundesanstalt für Materialforschung und -prüfung (BAM) developed and will maintain a tool to meet the needs of modern data processing, documentation requirements, and emerging fields of RM activity. The main features of eCerto are discussed using previously certified reference materials.
KW - Reference material
KW - Statistics
KW - Software
KW - Collaborative trial
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-591851
DO - https://doi.org/10.1007/s00216-023-05099-3
SP - 1
EP - 9
PB - Springer Science and Business Media LLC
AN - OPUS4-59185
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gerrits, Ruben
A1 - Stepec, Biwen An
A1 - Bäßler, Ralph
A1 - Becker, Roland
A1 - Dimper, Matthias
A1 - Feldmann, Ines
A1 - Goff, Kira L.
A1 - Günster, Jens
A1 - Hofmann, Andrea
A1 - Hesse, René
A1 - Kirstein, Sarah
A1 - Klein, Ulrich
A1 - Mauch, Tatjana
A1 - Neumann-Schaal, Meina
A1 - Özcan Sandikcioglu, Özlem
A1 - Taylor, Nicole M.
A1 - Schumacher, Julia
A1 - Shen, Yin
A1 - Strehlau, Heike
A1 - Weise, Matthias
A1 - Wolf, Jacqueline
A1 - Yurkov, Andrey
A1 - Gieg, Lisa M.
A1 - Gorbushina, Anna
T1 - A 30-year-old diesel tank: Fungal-dominated biofilms cause local corrosion of galvanised steel
N2 - The increased use of biodiesel is expected to lead to more microbial corrosion, fouling and fuel degradation issues. In this context, we have analysed the metal, fuel and microbiology of a fouled diesel tank which had been in service for over 30 years. The fuel itself, a B7 biodiesel blend, was not degraded, and—although no free water phase was visible—contained a water content of ~60 ppm. The microbial community was dominated by the fungus Amorphotheca resinae, which formed thick, patchy biofilms on the tank bottom and walls. The tank sheets, composed of galvanised carbon steel, were locally corroded underneath the biofilms, up to a depth of a third of the sheet thickness. On the biofilm-free surfaces, Zn coatings could still be observed. Taken together, A. resinae was shown to thrive in these water-poor conditions, likely enhancing corrosion through the removal of the protective Zn coatings.
KW - Fungal biofilms
KW - Biodiesel degradation mechanisms
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655014
DO - https://doi.org/10.1038/s41529-025-00731-2
SN - 2397-2106
VL - 10
IS - 1
SP - 1
EP - 14
PB - Springer Science and Business Media LLC
AN - OPUS4-65501
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sichler, Theresa Constanze
A1 - Adam, Christian
A1 - Barjenbruch, M.
A1 - Montag, D.
A1 - Mauch, Tatjana
A1 - Sommerfeld, Thomas
A1 - Ehm, J.H.
T1 - Variation of the element composition of municipal sewage sludges in the context of new regulations on phosphorus recovery in Germany
N2 - Phosphorus (P) recovery is obligatory for all sewage sludges with more than 20 g P/kg dry matter (DM) from 2029 in Germany. Nine wastewater treatment plants (WWTPs) were chosen to investigate variations of phosphorus contents and other parameters in sewage sludge over the year. Monthly sewage sludge samples from each WWTP were analyzed for phosphorus and other matrix elements (C, N, H, Ca, Fe, Al, etc.), for several trace elements (As, Cr, Mo, Ni, Pb, Sn) and loss of ignition. Among the nine WWTPs, there are four which have phosphorus contents both above and below the recovery limit of 20 g/kg DM along the year. Considering the average phosphorus content over the year, only one of them is below the limit. Compared to other matrix elements and parameters, phosphorus fuctuations are low with an average of 7% over all nine WWTPs. In total, only hydrogen and carbon are more constant in the sludge.
In several WWTPs with chemical phosphorus elimination, phosphorus fuctuations showed similar courses like iron and/or aluminum. WWTPs with chamber flter presses rather showed dilution efects of calcium dosage. As result of this study, monthly phosphorus measurement is highly recommended to determine whether a WWTP is below the
20 g/kg DM limit.
KW - Sewage sludge
KW - Phosphorus recovery
KW - Wastewater
KW - Phosphorus elimination
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-557499
DO - https://doi.org/10.1186/s12302-022-00658-4
SN - 2190-4707
VL - 34
IS - 1
SP - 1
EP - 12
PB - Springer Nature
CY - Berlin
AN - OPUS4-55749
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wetzel, Annica
A1 - Morell, Daniel
A1 - von der Au, Marcus
A1 - Witt, Julia
A1 - Özcan Sandikcioglu, Özlem
T1 - Transpassive Behavior of Equimolar CrMnFeCoNi and CrCoNi Multi‐Principal Element Alloys in an Alkaline NaCl Electrolyte
N2 - AbstractWe investigated the corrosion properties and transpassive behavior of CrMnFeCoNi and CrCoNi multi‐principal element alloys (MPEAs) in a 0.1 M NaCl electrolyte at pH 12. By using SECM‐based tip substrate voltammetry (TSV) in combination with the chemical analysis of the electrolyte, we were able to differentiate between anodic metal dissolution and oxygen evolution in the transpassive range. Our investigations have shown that CrCoNi has a significantly higher corrosion resistance compared to CrMnFeCoNi. In the studied alkaline environment, a transpassive oxide film is formed on the surface of CrCoNi during secondary passivation. This transpassive oxide film appears to play a significant role in oxygen evolution, as the increase in TSV currents at the microelectrode coincides with the corresponding current density plateau of the voltametric current trace. The formation of the transpassive oxide film was not observed in previous studies conducted in acidic environments. Moreover, the alkaline electrolyte induced a positive hysteresis and mild pitting corrosion, in addition to intergranular corrosion, which was the sole corrosion process observed at acidic pH levels. These findings enhance the understanding of the processes governing the transpassivity of CrMnFeCoNi and CrCoNi MPEAs in alkaline environments and have potential implications for the development of application‐tailored corrosion‐resistant MPEAs.
KW - Multi-principal element alloys
KW - MPEA
KW - Corrosion
KW - Oxygen evolution reaction
KW - Transpassive region
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-611594
DO - https://doi.org/10.1002/celc.202400346
SN - 2196-0216
SP - 1
EP - 9
PB - Wiley
AN - OPUS4-61159
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Recknagel, Sebastian
A1 - Richter, Silke
A1 - Hoppe, Marion
A1 - Meckelburg, Angela
A1 - Prinz, Carsten
A1 - Roik, Janina
A1 - Abad Andrade, Carlos Enrique
T1 - Powering precision: development of a certified reference material for elemental composition analysis of lithium nickel manganese cobalt oxide (Li-NMC) cathode material for lithium-ion batteries
N2 - This work presents the development and certification of the world’s first certified reference material (CRM), BAM-S014, for a lithium nickel manganese cobalt oxide (LiNi0.33Mn0.33Co0.33O2 or Li-NMC 111) cathode material—an integral component in high-energy-density lithium-ion batteries that power electric vehicles (EVs), portable electronics, and stationary energy storage systems. By providing certified mass fractions for 11 elements, this CRM addresses a critical need for accurate and traceable elemental analysis, supporting quality control and regulatory compliance in the global battery industry. Ensuring reliable and harmonized measurements supports the efficient use of resources, including the reuse of recycled materials, and ultimately helps maintain product performance and safety. The values were assigned through an interlaboratory comparison involving 16 participating laboratories and various analytical techniques such as inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), X-ray fluorescence (XRF) spectrometry, and combustion analysis. In addition to chemical characterization, the certification process includes homogeneity and stability testing of the candidate material. Details are provided on the analytical methods used for chemical characterization and the calculation of the uncertainties of the certified mass fractions. In addition to detailing the development of the CRMs, this work provides an overview of ongoing standardization activities in Li-component analysis, thereby guiding the calibration of analytical methods and contributing to the establishment of globally accepted standards for evaluating energy storage materials and advancing sustainable mobility and clean energy solutions.
KW - Certified reference material
KW - Lithium nickel manganese cobalt oxide
KW - LNMC
KW - Lithium-ion battery
KW - Cathode material
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643763
DO - https://doi.org/10.1007/s00216-025-05766-7
SN - 1618-2642
VL - 417
IS - 12
SP - 2643
EP - 2653
PB - Springer Nature
AN - OPUS4-64376
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Zaki, Mohammad
A1 - Prinz, Carsten
A1 - Ruehle, Bastian
T1 - A Self-Driving Lab for Nano- and Advanced Materials Synthesis
N2 - The recent emergence of self-driving laboratories (SDL) and material acceleration platforms (MAPs) demonstrates the ability of these systems to change the way chemistry and material syntheses will be performed in the future. Especially in conjunction with nano- and advanced materials which are generally recognized for their great potential in solving current material science challenges, such systems can make disrupting contributions. Here, we describe in detail MINERVA, an SDL specifically built and designed for the synthesis, purification, and in line characterization of nano- and advanced materials. By fully automating these three process steps for seven different materials from five representative, completely different classes of nano- and advanced materials (metal, metal oxide, silica, metal organic framework, and core–shell particles) that follow different reaction mechanisms, we demonstrate the great versatility and flexibility of the platform. We further study the reproducibility and particle size distributions of these seven representative materials in depth and show the excellent performance of the platform when synthesizing these material classes. Lastly, we discuss the design considerations as well as the hardware and software components that went into building the platform and make all of the components publicly available.
KW - Self-driving laboratories
KW - Materials acceleration platforms
KW - Nanomaterials
KW - Advanced materials
KW - Automation
KW - Robotics
KW - In-line characterization
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-627361
DO - https://doi.org/10.1021/acsnano.4c17504
SN - 1936-086X
VL - 19
IS - 9
SP - 9029
EP - 9041
PB - ACS Publications
CY - Washington, DC
AN - OPUS4-62736
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kossatz, Philipp
A1 - Mezhov, Alexander
A1 - Andresen, Elina
A1 - Prinz, Carsten
A1 - Schmidt, Wolfram
A1 - Resch-Genger, Ute
T1 - Assessing the Applicability of Lanthanide-Based Upconverting Nanoparticles for Optically Monitoring Cement Hydration and Tagging Building Materials
N2 - Chemically stable, lanthanide-based photon upconversion micro- and nanoparticles (UCNPs) with their characteristic multicolor emission bands in the ultraviolet (UV), visible (vis), near-infrared (NIR), and short-wave infrared (SWIR) arepromising optical reporters and barcoding tags. To assess the applicability of UCNPs for the monitoring of early stage cement hydration processes and as authentication tags for cementitious materials, we screened the evolution of the luminescence of Selfmade core-only NaYF4:Yb,Er UCNPs and commercial μm-sized Y2O2S:Yb,Er particles during the first stages of cement hydration, which largely determines the future properties of the hardened material. Parameters explored from the UCNP side included particle size, morphology, surface chemistry or coating, luminescence properties, and concentration in different cement mixtures. From the cement side, the influence of the mineral composition of the cement matrix was representatively examined for ordinary Portland cement (OPC) and its constituents tricalcium aluminate (C3A), tricalcium silicate (C3S), and gypsum at different water to cement ratios. Based on reflection and luminescence measurements, enabling online monitoring, which were complemented by XRD and isothermal heat-flow calorimetric measurements to determine whether the incorporation of these particles could impair cement hydration processes, well suited lanthanide particle reporters could be identified as well as application conditions. In addition, thereby the reporter influence on cement hydration kinetics could be minimized while still preserving a high level of information content. The best performance for the luminescence probing of changes during early stage cement hydration processes was observed for 25 nm-sized oleate (OA)-coated UCNPs added in a concentration of 0.1 wt %. Higher UCNP amounts of 1.0 wt % delayed cement hydration processes size- and surface coatingspecifically in the first 24 h. Subsequent luminescence stability screening studies performed over a period of about one year support the applicability of UCNPs as optical authentication tags for construction materials.
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Quantum yield
KW - NIR
KW - Mechanism
KW - Characterization
KW - XRD
KW - Calorimetry
KW - Advanced material
KW - Cement
KW - Monitoring
KW - Surface
KW - Size
KW - Lifetime
KW - Barcode
KW - Lanthanide
KW - Upconversion
KW - Encoding
KW - Method
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-638318
DO - https://doi.org/10.1021/acsomega.5c02236
SN - 2470-1343
VL - 10
IS - 29
SP - 31587
EP - 31599
PB - ACS Publications
CY - Washington, DC
AN - OPUS4-63831
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dhamo, Lorena
A1 - Wegner, Karl David
A1 - Würth, Christian
A1 - Häusler, I.
A1 - Hodoroaba, Vasile-Dan
A1 - Resch-Genger, Ute
T1 - Assessing the influence of microwave-assisted synthesis parameters and stabilizing ligands on the optical properties of AIS/ZnS quantum dots
N2 - Luminescent semiconductor quantum dots (QDs) are frequently used in the life and material sciences as reporter for bioimaging studies and as active components in devices such as displays, light-emitting diodes, solar cells, and sensors. Increasing concerns regarding the use of toxic elements like cadmium and lead, and hazardous organic solvents during QD synthesis have meanwhile triggered the search for heavy-metal free QDs using green chemistry syntheses methods. Interesting candidates are ternary AgInS2 (AIS) QDs that exhibit broad photoluminescence (PL) bands, large effective Stokes shifts, high PL quantum yields (PL QYs), and long PL lifetimes, which are particularly beneficial for applications such as bioimaging, white light-emitting diodes, and solar concentrators. In addition, these nanomaterials can be prepared in high quality with a microwave-assisted (MW) synthesis in aqueous solution. The homogeneous heat diffusion and instant temperature rise of the MW synthesis enables a better control of QD nucleation and growth and thus increases the batch-to-batch reproducibility. In this study, we systematically explored the MW synthesis of AIS/ZnS QDs by varying parameters such as the order of reagent addition, precursor concentration, and type of stabilizing thiol ligand, and assessed their influence on the optical properties of the resulting AIS/ZnS QDs. Under optimized synthesis conditions, water-soluble AIS/ZnS QDs with a PL QY of 65% and excellent colloidal and long-term stability could be reproducible prepared.
KW - Quantum dots
KW - Microwave-assisted synthesis
KW - AgInS
KW - Aqueous synthesis
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567091
DO - https://doi.org/10.1038/s41598-022-25498-3
SN - 2045-2322
VL - 12
IS - 1
SP - 1
EP - 11
PB - Nature Publishing Group
CY - London
AN - OPUS4-56709
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hülagü, Deniz
A1 - Tobias, Charlie
A1 - Dao, Radek
A1 - Komarov, Pavel
A1 - Rurack, Knut
A1 - Hodoroaba, Vasile-Dan
T1 - Towards 3D determination of the surface roughness of core–shell microparticles as a routine quality control procedure by scanning electron microscopy
N2 - AbstractRecently, we have developed an algorithm to quantitatively evaluate the roughness of spherical microparticles using scanning electron microscopy (SEM) images. The algorithm calculates the root-mean-squared profile roughness (RMS-RQ) of a single particle by analyzing the particle’s boundary. The information extracted from a single SEM image yields however only two-dimensional (2D) profile roughness data from the horizontal plane of a particle. The present study offers a practical procedure and the necessary software tools to gain quasi three-dimensional (3D) information from 2D particle contours recorded at different particle inclinations by tilting the sample (stage). This new approach was tested on a set of polystyrene core-iron oxide shell-silica shell particles as few micrometer-sized beads with different (tailored) surface roughness, providing the proof of principle that validates the applicability of the proposed method. SEM images of these particles were analyzed by the latest version of the developed algorithm, which allows to determine the analysis of particles in terms of roughness both within a batch and across the batches as a routine quality control procedure. A separate set of particles has been analyzed by atomic force microscopy (AFM) as a powerful complementary surface analysis technique integrated into SEM, and the roughness results have been compared.
KW - Core–shell particles
KW - Image analysis
KW - Roughness
KW - Scanning electron microscopy
KW - Atomic force microscopy
KW - Tilting
KW - Batch analysis
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-607590
DO - https://doi.org/10.1038/s41598-024-68797-7
SN - 2045-2322
VL - 14
IS - 1
SP - 1
EP - 13
PB - Springer Science and Business Media LLC
AN - OPUS4-60759
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Riedel, Soraya
A1 - Hülagü, Deniz
A1 - Bennet, Francesca
A1 - Carl, Peter
A1 - Flemig, Sabine
A1 - Schmid, Thomas
A1 - Schenk, J. A.
A1 - Hodoroaba, Vasile-Dan
A1 - Schneider, Rudolf
T1 - Electrochemical Immunomagnetic Ochratoxin A Sensing: Steps Forward in the Application of 3,3’,5,5’- Tetramethylbenzidine in Amperometric Assays
N2 - Electrochemical methods offer great promise in meeting the demand for user-friendly on-site devices for Monitoring important parameters. The food industry often runs own lab procedures, for example, for mycotoxin analysis, but it is a major goal to simplify analysis, linking analytical methods with smart technologies. Enzyme-linked immunosorbent assays, with photometric detection of 3,3’,5,5’-tetramethylbenzidine (TMB),form a good basis for sensitive detection. To provide a straightforward approach for the miniaturization of the detectionstep, we have studied the pitfalls of the electrochemical TMB detection. By cyclic voltammetry it was found that the TMB electrochemistry is strongly dependent on the pH and the electrode material. A stable electrode response to TMB could be achieved at pH 1 on gold electrodes. We created a smartphonebased, electrochemical, immunomagnetic assay for the detection of ochratoxin A in real samples, providing a solid basis forsensing of further analytes.
KW - Ochratoxin A
KW - Amperometry
KW - Cyclic voltammetry
KW - Electrochemistry
KW - Immunoassay
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530421
DO - https://doi.org/10.1002/celc.202100446
N1 - Geburtsname von Riedel, Soraya: Höfs, S. - Birth name of Riedel, Soraya: Höfs, S.
VL - 8
IS - 13
SP - 2597
EP - 2606
AN - OPUS4-53042
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Mrkwitschka, Paul
A1 - Rühle, Bastian
A1 - Kuchenbecker, Petra
A1 - Löhmann, Oliver
A1 - Lindemann, Franziska
A1 - Hodoroaba, Vasile-Dan
T1 - Embedding and cross-sectioning as a sample preparation procedure for accurate and representative size and shape measurement of nanopowders
N2 - Reliable measurement of the size of polydisperse, complex-shaped commercial nanopowders is a difficult but necessary task, e.g., for regulatory requirements and toxicity risk assessment. Suitable methods exist for the accurate characterization of the size of non-aggregated, stabilized, spherical and monodisperse nanoparticles. In contrast, industrial nanoscale powders usually require dedicated sample preparation procedures developed for the analysis method of choice. These nano-powders tend to agglomerate and/or aggregate, a behavior which in combination with an innate broad particle size distribution and irregular shape often significantly alters the achievable accuracy of the measured size parameters. The present study systematically tests two commercially available nanoscale powders using different sample preparation methods for correlative analysis by scanning electron microscopy, dynamic light scattering, Brunauer–Emmet–Teller method and differential mobility analysis. One focus was set on the sample preparation by embedding nanoparticles in carbon-based hot-mounting resin. Literature on this topic is scarce and the accuracy of the data extracted from cross sections of these particles is unclearly stated. In this paper systematic simulations on the deviation of the size parameters of well-defined series of nanoparticles with different shapes from the nominal value were carried out and the contributing factors are discussed.
KW - Nanopowder
KW - Electron microscopy
KW - Sample preparation
KW - Cross-sectioning
KW - Cerium oxide
KW - Zinc oxide
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-593289
DO - https://doi.org/10.1038/s41598-023-51094-0
SN - 2045-2322
VL - 14
SP - 1
EP - 10
PB - Springer Nature
CY - London
AN - OPUS4-59328
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dhamo, Lorena
A1 - Carulli, F.
A1 - Nickl, Philip
A1 - Wegner, Karl David
A1 - Hodoroaba, Vasile-Dan
A1 - Würth, Christian
A1 - Brovelli, S.
A1 - Resch-Genger, Ute
T1 - Efficient luminescent solar concentrators based on environmentally friendly Cd-free ternary AIS/ZnS quantum dots
N2 - Luminescent solar concentrators (LSC) allow to obtain renewable energy from building integrated photovoltaic systems. As promising efficient and long-term stable LSC fluorophores semiconductor nanocrystals like Quantum dots (QDs) with size and composition tunable optoelectronic properties have recently emerged. The most popular II/VI or IV/VI semiconductor QDs contain, however, potentially hazardous cadmium or lead ions, which is a bottleneck for commercial applications. A simple aqueous based, microwaveassisted synthesis for environmentally friendly and highly emissive AgInS2/ ZnS QDs is developed using 3-mercaptopropionic acid (MPA) and glutathione (GSH) and their incorporation into polylaurylmethacrylate (PLMA) polymer slabs integrable in LSC devices (10.4 × 10.4 × 0.2 cm3, G = 12.98).
With this simple approach, optical power efficiencies (OPE) of 3.8% and 3.6% and optical quantum efficiencies (OQE) of 24.1% and 27.4% are obtained, which are among the highest values yet reported.
KW - Solar energy
KW - Solar concentrator
KW - Quantum dots
KW - Advanced material
KW - Quantum yield
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-529735
DO - https://doi.org/10.1002/adom.202100587
SN - 2195-1071
SN - 0935-9648
VL - 9
IS - 17
SP - 1
EP - 8
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-52973
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rühle, Bastian
A1 - Krumrey, Julian Frederic
A1 - Hodoroaba, Vasile-Dan
T1 - Workflow towards automated segmentation of agglomerated, non‑spherical particles from electron microscopy images using artificial neural networks
N2 - We present a workflow for obtaining fully trained artificial neural networks that can perform automatic particle segmentations of agglomerated, non-spherical nanoparticles from scanning electron microscopy images “from scratch”, without the need for large training data sets of manually annotated images. The whole process only requires about 15 minutes of hands-on time by a user and can typically be finished within less than 12 hours when training on a single graphics card (GPU). After training, SEM image analysis can be carried out by the artificial neural network within seconds. This is achieved by using unsupervised learning for most of the training dataset generation, making heavy use of generative adversarial networks and especially unpaired image-to-image translation via cycle-consistent adversarial networks. We compare the segmentation masks obtained with our suggested workflow qualitatively and quantitatively to state-of-the-art methods using various metrics. Finally, we used the segmentation masks for automatically extracting particle size distributions from the SEM images of TiO2 particles, which were in excellent agreement with particle size distributions obtained manually but could be obtained in a fraction of the time.
KW - Electron microscopy
KW - Neural networks
KW - Artificial intelligence
KW - Image segmentation
KW - Automated image analysis
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-522454
DO - https://doi.org/10.1038/s41598-021-84287-6
VL - 11
IS - 1
SP - 4942
PB - Springer Nature
AN - OPUS4-52245
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Zhang, Kun
A1 - Carrod, Andrew J.
A1 - Del Giorgio, Elena
A1 - Hughes, Joseph
A1 - Rurack, Knut
A1 - Bennet, Francesca
A1 - Hodoroaba, Vasile-Dan
A1 - Harrad, Stuart
A1 - Pikramenou, Zoe
T1 - Luminescence Lifetime-Based Sensing Platform Based on Cyclometalated Iridium(III) Complexes for the Detection of Perfluorooctanoic Acid in Aqueous Samples
N2 - Luminescence lifetimes are an attractive analytical method for detection due to its high sensitivity and stability. Iridium probes exhibit luminescence with long excited-state lifetimes, which are sensitive to the local environment. Perfluorooctanoic acid (PFOA) is listed as a chemical of high concern regarding its toxicity and is classified as a “forever chemical”. In addition to strict limits on the presence of PFOA in drinking water, environmental contamination from industrial effluent or chemical spills requires rapid, simple, accurate, and cost-effective analysis in order to aid containment. Herein, we report the fabrication and function of a novel and facile luminescence sensor for PFOA based on iridium modified on gold surfaces. These surfaces were modified with lipophilic iridium complexes bearing alkyl chains, namely, IrC6 and IrC12, and Zonyl-FSA surfactant. Upon addition of PFOA, the modified surfaces IrC6-FSA@Au and IrC12-FSA @Au show the largest change in the red luminescence signal with changes in the luminescence lifetime that allow monitoring of PFOA concentrations in aqueous solutions. The platform was tested for the measurement of PFOA in aqueous samples spiked with known concentrations of PFOA and demonstrated the capacity to determine PFOA at concentrations >100 μg/L (240 nM).
KW - Perfluorooctanoic Acid (PFOA)
KW - Cyclometalated iridium (III) complexes
KW - Luminescent lifetime
KW - Optically active surfaces
KW - ToF-SIMS
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594535
UR - https://pubs.acs.org/doi/10.1021/acs.analchem.3c04289
DO - https://doi.org/10.1021/acs.analchem.3c04289
VL - 96
IS - 4
SP - 1565
EP - 1575
PB - American Chemical Society (ACS)
AN - OPUS4-59453
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hülagü, Deniz
A1 - Tobias, Charlie
A1 - Climent Terol, Estela
A1 - Gojani, Ardian
A1 - Rurack, Knut
A1 - Hodoroaba, Vasile-Dan
T1 - Generalized Analysis Approach of the Profile Roughness by Electron Microscopy with the Example of Hierarchically Grown Polystyrene–Iron Oxide–Silica Core–Shell–Shell Particles
N2 - The roughness as a property of core–shell (CS) microparticles plays a key role in their functionality. Quantitative evaluation of the roughness of CS microparticles is, however, a challenging task with approaches using electron microscopy images being scarce and showing pronounced differences in terms of methodology and results. This work presents a generalized method for the reliable roughness determination of nonplanar specimens such as CS particles from electron microscopic images, the method being robust and reproducible with a high accuracy. It involves a self-written software package (Python) that analyzes the recorded images, extracts corresponding data, and calculates the roughness based on the deviation of the identified contour. Images of single particles are taken by a dual mode scanning electron microscopy (SEM) setup which permits imaging of the same field-of-view of the sample with high resolution and surface sensitive in SE InLens mode as well as in transmission mode (TSEM). Herein, a new type of polystyrene core–iron oxide shell–silica shell particles is developed to serve as a set of lower micrometer-sized study objects with different surface roughness; the analysis of their images by the semiautomatic workflow is demonstrating that the particles’ profile roughness can be quantitatively obtained.
KW - Core–shell particles
KW - Image analysis
KW - Nanoparticles
KW - Roughness
KW - SEM
KW - transmission mode
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-542576
DO - https://doi.org/10.1002/adem.202101344
SP - 1
EP - 9
PB - Wiley-VCH
AN - OPUS4-54257
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bayerlein, Bernd
A1 - Hanke, T.
A1 - Muth, Thilo
A1 - Riedel, Jens
A1 - Schilling, Markus
A1 - Schweizer, C.
A1 - Skrotzki, Birgit
A1 - Todor, A.
A1 - Moreno Torres, Benjami
A1 - Unger, Jörg F.
A1 - Völker, Christoph
A1 - Olbricht, Jürgen
T1 - A Perspective on Digital Knowledge Representation in Materials Science and Engineering
N2 - The amount of data generated worldwide is constantly increasing. These data come from a wide variety of sources and systems, are processed differently, have a multitude of formats, and are stored in an untraceable and unstructured manner, predominantly in natural language in data silos. This problem can be equally applied to the heterogeneous research data from materials science and engineering. In this domain, ways and solutions are increasingly being generated to smartly link material data together with their contextual information in a uniform and well-structured manner on platforms, thus making them discoverable, retrievable, and reusable for research and industry. Ontologies play a key role in this context. They enable the sustainable representation of expert knowledge and the semantically structured filling of databases with computer-processable data triples.
In this perspective article, we present the project initiative Materials-open-Laboratory (Mat-o-Lab) that aims to provide a collaborative environment for domain experts to digitize their research results and processes and make them fit for data-driven materials research and development. The overarching challenge is to generate connection points to further link data from other domains to harness the promised potential of big materials data and harvest new knowledge.
KW - Data infrastructures
KW - Digital representations
KW - Digital workflows
KW - Knowledge graphs
KW - Materials informatics
KW - Ontologies
KW - Vocabulary providers
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-546729
DO - https://doi.org/10.1002/adem.202101176
SN - 1438-1656
SP - 1
EP - 14
PB - Wiley-VCH GmbH
CY - Weinheim
AN - OPUS4-54672
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Obenlüneschloß, Jorit
A1 - Boysen, Nils
A1 - Rönnby, Karl
A1 - Muriqi, Arbresha
A1 - Hoffmann, Volker
A1 - Abad Andrade, Carlos Enrique
A1 - Rogalla, Detlef
A1 - Brokmann, Ulrike
A1 - Rädlein, Edda
A1 - Nolan, Michael
A1 - Devi, Anjana
T1 - Ein seltener mononuklearer Lithium‐Carben‐Komplex für die Atomlagenabscheidung von lithiumhaltigen Dünnschichten
N2 - KurzfassungLithium ist das zentrale Element moderner Batterietechnologien, und die Herstellung von lithiumhaltigen Materialien mittels Atomlagenabscheidung (engl. Atomic Layer Deposition, ALD) bietet erhebliche Vorteile bei der Kontrolle der Schichtdicke und ‐zusammensetzung. In dieser Studie wird ein neuer mononuklearer, durch ein N‐heterocyclisches Carben (NHC) stabilisierter Lithiumkomplex, [Li(tBuNHC)(hmds)], als vielversprechender Präkursor für die ALD von lithiumhaltigen Dünnschichten vorgestellt. Die strukturelle Charakterisierung erfolgt durch den Vergleich von Dichtefunktionaltheorie (DFT) und Einkristall‐Röntgenbeugung (engl. Single‐Crystal X‐ray Diffraction, SC‐XRD), wobei die seltene mononukleare Struktur bestätigt wird. Thermogravimetrische Analysen (TGA) zeigen vorteilhafte thermische Eigenschaften für ALD‐Anwendungen. Die Verbindung weist einen niedrigen Schmelzpunkt, saubere Verdampfung und ermutigende Volatilitätsparameter im Vergleich zu anderen Lithium‐Präkursoren auf. ALD‐Experimente mit [Li(tBuNHC)(hmds)] und Ozon zeigen dessen Effektivität bei der Abscheidung von LiSixOy‐Filmen. Der ALD‐Prozess zeigt ein gesättigtes Wachstum pro Zyklus (engl. Growth per Cycle, GPC) von 0,95 Å. Die Zusammensetzung, analysiert mittels Rutherford‐Rückstreu‐Spektrometrie/Kernreaktionsanalyse (engl. Rutherford Backscattering Spectrometry/Nuclear Reaction Analysis, RBS/NRA), Röntgenphotoelektronenspektroskopie (engl. X‐ray Photoelectron Spectroscopy, XPS) und Glimmentladungsspektroskopie (engl. Glow Discharge Optical Emission Spectrometry, GD‐OES), bestätigt das Vorhandensein von Lithium und Silizium in den erwarteten Verhältnissen. Diese Arbeit stellt nicht nur einen neuen ALD‐Präkursor vor, sondern trägt auch zum Verständnis der Lithiumchemie bei und bietet Einblicke in die faszinierende Koordinationschemie und das thermische Verhalten von durch NHC‐Liganden stabilisierten Lithiumkomplexen.
KW - Atomlagenabscheidung
KW - N-heterozyklischer-Carben-(NHC)-stabilisierter Lithium-Präkursor
KW - Mononuklearer Li–Carben-Komplex
KW - Lithiumsilicat-Dünnfilme
KW - Filmanalytik/-Charakterisierung
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-644045
DO - https://doi.org/10.1002/ange.202513066
SN - 0044-8249
N1 - Es gibt eine parallele Sprachausgabe (englisch), ein Link befindet sich im Feld zugehöriger Identifikator - There is a parallel language edition (English), a link is in the field related identifier
SP - 1
EP - 12
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-64404
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Braymer, Joseph J.
A1 - Knauer, Lukas
A1 - Crack, Jason C.
A1 - Oltmanns, Jonathan
A1 - Heghmanns, Melanie
A1 - Soares, Jéssica C.
A1 - Le Brun, Nick E.
A1 - Schünemann, Volker
A1 - Kasanmascheff, Müge
T1 - Yeast [FeFe]-hydrogenase-like protein Nar1 binds a [2Fe–2S] cluster
N2 - Nar1 is an essential eukaryotic protein proposed to function as an iron–sulphur (Fe/S) cluster trafficking factor in the cytosolic iron–sulphur protein assembly (CIA) machinery. However, such a role has remained unclear due to difficulties in purifying adequate amounts of cofactor-bound protein. The [FeFe]-hydrogenase-like protein has two conserved binding sites for [4Fe–4S] clusters but does not show hydrogenase activity in vivo due to the lack of an active site [2Fe]H cofactor. Here, we report a new preparation procedure for Nar1 that facilitated studies by UV-vis, EPR, and Mössbauer spectroscopies, along with native mass spectrometry. Nar1 recombinantly produced in E. coli contained a [4Fe–4S] cluster, bound presumably at site 1, along with an unexpected [2Fe–2S] cluster bound at an unknown site. Fe/S reconstitution reactions installed a second [4Fe–4S] cluster at site 2, leading to protein with up to three Fe/S cofactors. It is proposed that the [2Fe–2S] cluster occupies a cavity in Nar1 that is filled by the [2Fe]H cofactor in [FeFe]-hydrogenases. Strikingly, two of the Fe/S clusters were rapidly destroyed by molecular oxygen, linking Nar1 oxygen sensitivity in vitro to phenotypes observed previously in vivo. Our biochemical results, therefore, validate a direct link between cellular oxygen concentrations and the functioning of the CIA pathway. These advances also now allow for the pursuit of in vitro Fe/S cluster transfer assays, which will shed light on Fe/S trafficking and insertion by CIA components.
KW - Biocorrosion
KW - Hydrogenases
KW - Metalloprotein
KW - Yeast
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-649463
DO - https://doi.org/10.1039/D5SC04860E
SN - 2041-6520
VL - 17
IS - 1
SP - 373
EP - 380
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-64946
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Saleh, Maysoon I.
A1 - Rühle, Bastian
A1 - Wang, Shu
A1 - Radnik, Jörg
A1 - You, Yi
A1 - Resch-Genger, Ute
T1 - Assessing the protective effects of different surface coatings on NaYF4:YB3+, Er3+, upconverting nanoparticles in buffer and DMEM
N2 - We studied the dissolution behavior of β NaYF4:Yb(20%), Er(2%) UCNP of two different sizes in biologically relevant media i.e., water (neutral pH), phosphate buffered saline (PBS), and Dulbecco’s modified Eagle medium (DMEM) at different temperatures and particle concentrations. Special emphasis was dedicated to assess the influence of different surface functionalizations, particularly the potential of mesoporous and microporous silica shells of different thicknesses for UCNP stabilization and protection. Dissolution was quantified electrochemically using a fluoride ion selective electrode (ISE) and by inductively coupled plasma optical emission spectrometry (ICP OES). In addition, dissolution was monitored fluorometrically. These experiments revealed that a thick microporous silica shell drastically decreased dissolution. Our results also underline the critical influence of the chemical composition of the aqueous environment on UCNP dissolution. In DMEM, we observed the formation of a layer of adsorbed molecules on the UCNP surface that protected the UCNP from dissolution and enhanced their fluorescence. Examination of this layer by X ray photoelectron spectroscopy (XPS) and mass spectrometry (MS) suggested that mainly phenylalanine, lysine, and glucose are adsorbed from DMEM. These findings should be considered in the future for cellular toxicity studies with UCNP and other nanoparticles and the design of new biocompatible surface coatings.
KW - Fluorescence
KW - Lifetime
KW - Method
KW - Quantification
KW - Stability
KW - Coating
KW - Surface chemistry
KW - Lanthanide
KW - Fluoride
KW - Electrochemistry
KW - ICP-OES
KW - Upconversion
KW - Nano
KW - Particle
KW - Aging
KW - Quality assurance
KW - Mass spectrometry
KW - XPS
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-515984
DO - https://doi.org/10.1038/s41598-020-76116-z
SN - 2045-2322
VL - 10
IS - 1
SP - 19318-1
EP - 19318-11
PB - Springer Nature
CY - London
AN - OPUS4-51598
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Cairns, Warren R. L.
A1 - Braysher, Emma C.
A1 - Butler, Owen T.
A1 - Cavoura, Olga
A1 - Davidson, Christine M.
A1 - Todoli Torro, Jose Luis
A1 - von der Au, Marcus
T1 - Atomic spectrometry update: review of advances in environmental analysis
N2 - This review covers advances in the analysis of air, water, plants, soils and geological materials by a range of atomic spectrometric techniques including atomic emission, absorption, fluorescence and mass spectrometry.
KW - Environmental analysis
KW - Review
KW - Trend Article
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653977
DO - https://doi.org/10.1039/D5JA90058A
SN - 0267-9477
VL - 41
IS - 1
SP - 16
EP - 70
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-65397
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Onyenso, Gabriel
A1 - AI-Zawity, Jiwar
A1 - Farahbakhsh, Nastaran
A1 - Schardt, Annika
A1 - Yadigarli, Aydan
A1 - Vakamulla Raghu, Swathi Naidu
A1 - Engelhard, Carsten
A1 - Müller, Mareike
A1 - Schönherr, Holger
A1 - Killian, Manuela S.
T1 - Novel Ag-modified zirconia nanomaterials with antibacterial activity
N2 - The outcome of an implant procedure largely depends on the implant's surface properties. Biomaterials are now designed to have surfaces with multifunctionality, such as favorable tissue integration and the ability to combat bacterial adhesion and colonization. Herein, we report on a simple approach to improve the antibacterial properties of zirconia nanotubes (ZrNTs) coatings by decorating with silver nanoparticles (AgNP), achieved through electrochemical anodization of a zirconium–silver alloy (Zr–Ag). The AgNPs were shown to partially consist of Ag2O, potentially enhancing the availability of Ag+ ions for antibacterial activity. The modified ZrNTs were characterized using SEM, EDS, ToF-SIMS, and XPS to determine their structural morphology and chemical composition, and were further subjected to antibacterial testing. The silver and zirconium ion release behavior was monitored via ICP-MS. ZrNTs decorated with AgNP exhibit strong antimicrobial activity (>99% bacterial killing) against both S. aureus and E. coli. Antimicrobial tests indicate that the antibacterial activity against the Gram-positive pathogen S. aureus was improved by a factor of 100 compared to unmodified ZrNTs, while unmodified ZrNTs already showed a comparable reduction of viable Gram-negative E. coli. This strategy illustrates a straightforward and effective modification that optimizes the interface between the host environment and the biomaterial surface to meet the very important criteria of biocompatibility and active antibacterial response.
KW - Mass Spectrometry
KW - Nanoparticles
KW - Advanced Materials
KW - ICP-MS
KW - Antimicrobial material
KW - ToF-SIMS
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653990
DO - https://doi.org/10.1039/d5ra07099f
SN - 2046-2069
VL - 16
IS - 3
SP - 2286
EP - 2297
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-65399
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bayat, Mehmet Emin
A1 - Kipphardt, Heinrich
A1 - Tiebe, Carlo
A1 - Tuma, Dirk
A1 - Engelhard, Carsten
T1 - Trace-Level Ammonia–Water Interactions in Hydrogen: Challenges in Gas Purity Analysis Using Optical-Feedback Cavity-Enhanced Absorption Spectroscopy (OF-CEAS)
N2 - Ammonia is a critical impurity in hydrogen fuel due to its irreversible poisoning effect on proton exchange membrane fuel cells. Therefore, international standards (e.g., ISO 14687) set a stringent threshold of 100 nmol/mol. Furthermore, with the growing potential use of ammonia as a hydrogen carrier, its accurate quantification is becoming increasingly important. However, the presence of trace humidity poses analytical challenges, as ammonia may interact with water or interfaces, thereby affecting its detectability. Therefore, the goal of this work is to enable accurate trace ammonia quantification for hydrogen purity measurements through fundamental studies of the methodological challenges. Here, low-pressure sampling (ultra)long-path Optical-Feedback Cavity-Enhanced Absorption Spectroscopy (OF-CEAS) was applied with an effective optical path length of approximately 6.17 km. We studied three average amounts of ammonia: (38.2 ± 0.8) nmol/mol, (74.8 ± 0.7) nmol/mol, and (112.1 ± 1.2) nmol/mol. Furthermore, these amounts were investigated at trace-humidity levels ranging from 0.8 to 8.5 ppmV. We observed a systematic, nonlinear, and humidity-dependent positive measurement bias of up to + (1.0 ± 0.2) nmol/mol at the maximum investigated trace-humidity volume fraction of 8.5 ppmV. This bias was not caused by spectral interference but rather by water-induced accumulation of ammonia within the optical cavity. Moreover, time-resolved measurements in the presence of trace ammonia showed that water desorption follows first-order kinetics, whereas water adsorption followed mixed-order kinetics with an apparent reaction order of 1.57 ± 0.03. Distinct hydration states of surface-bound ammonia were identified, whereas under dry conditions and with increasing amounts of ammonia, enhanced surface adhesion through intermolecular clustering was observed. In addition, the presence of ammonium species within the sorption layer was indirectly confirmed by our experiments. In conclusion, we provide a deeper insight into trace-level ammonia–water interactions and establish a framework for optimizing methodologies, particularly for (ultra)long-path optical gas measurement systems.
KW - Ammonia
KW - Hydrogen
KW - OF-CEAS
KW - Humidity
KW - Surface Interactions
KW - Adsorption
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643627
DO - https://doi.org/10.1021/acsmeasuresciau.5c00105
SN - 2694-250X
SP - 1
EP - 15
PB - American Chemical Society (ACS)
AN - OPUS4-64362
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Srivastava, Priyanka
A1 - Tavernaro, Isabella
A1 - Scholtz, Lena
A1 - Genger, C.
A1 - Welker, P.
A1 - Schreiber, Frank
A1 - Meyer, Klas
A1 - Resch-Genger, Ute
T1 - Dual color pH probes made from silica and polystyrene nanoparticles and their performance in cell studies
N2 - Ratiometric green–red fluorescent nanosensors for fluorometrically monitoring pH in the acidic range were designed from 80 nm-sized polystyrene (PS) and silica (SiO2) nanoparticles (NPs), red emissive reference dyes, and a green emissive naphthalimide pH probe, analytically and spectroscopically characterized, and compared regarding their sensing performance in aqueous dispersion and in cellular uptake studies. Preparation of these optical probes, which are excitable by 405 nm laser or LED light sources, involved the encapsulation of the pH-inert red-fuorescent dye Nile Red (NR) in the core of self-made carboxylated PSNPs by a simple swelling procedure and the fabrication of rhodamine B (RhB)-stained SiO2-NPs from a silane derivative of pH-insensitive RhB. Subsequently, the custom-made naphthalimide pH probe, that utilizes a protonation-controlled photoinduced electron transfer process, was covalently attached to the carboxylic acid groups at the surface of both types of NPs. Fluorescence microscopy studies with the molecular and nanoscale optical probes and A549 lung cancer cells confirmed the cellular uptake of all probes and their penetration into acidic cell compartments, i.e., the lysosomes, indicated by the switching ON of the green naphthalimide fluorescence. This underlines their suitability for intracellular pH sensing, with the SiO2-based nanosensor revealing the best performance regarding uptake speed and stability.
KW - Sensors
KW - Silica and polystyrene nanoparticles
KW - pH probe
KW - Fluorescence spectroscopy
KW - Cell studies
KW - Dye
KW - Particle synthesis
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-569198
DO - https://doi.org/10.1038/s41598-023-28203-0
SN - 2045-2322
VL - 13
IS - 1
SP - 1321
EP - 1336
PB - Nature
CY - London
AN - OPUS4-56919
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Nordholt, Niclas
A1 - O'Hara, Kate
A1 - Resch-Genger, Ute
A1 - Blaskovich, M.
A1 - Rühle, Bastian
A1 - Schreiber, Frank
T1 - A fluorescently labelled quaternary ammonium compound (NBD-DDA) to study resistance mechanisms in bacteria
N2 - Quaternary ammonium compounds (QACs) are widely used as active agents in disinfectants, antiseptics, and preservatives. Despite being in use since the 1940s, there remain multiple open questions regarding their detailed mode-of-action and the mechanisms, including phenotypic heterogeneity, that can make bacteria less susceptible to QACs. To facilitate studies on resistance mechanisms towards QACs, we synthesized a fluorescent quaternary ammonium compound, namely N-dodecyl-N,N-dimethyl-[2-[(4-nitro-2,1,3-benzoxadiazol-7-yl)amino]ethyl]azanium-iodide (NBD-DDA). NBD-DDA is readily detected by flow cytometry and fluorescence microscopy with standard GFP/FITC-settings, making it suitable for molecular and single-cell studies. As a proof-of-concept, NBD-DDA was then used to investigate resistance mechanisms which can be heterogeneous among individual bacterial cells. Our results reveal that the antimicrobial activity of NBD-DDA against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa is comparable to that of benzalkonium chloride (BAC), a widely used QAC, and benzyl-dimethyl-dodecylammonium chloride (BAC12), a mono-constituent BAC with alkyl-chain length of 12 and high structural similarity to NBD-DDA. Characteristic time-kill kinetics and increased tolerance of a BAC tolerant E. coli strain against NBD-DDA suggest that the mode of action of NBD-DDA is similar to that of BAC. As revealed by confocal laser scanning microscopy (CLSM), NBD-DDA is preferentially localized to the cell envelope of E. coli, which is a primary target of BAC and other QACs. Leveraging these findings and NBD-DDA‘s fluorescent properties, we show that reduced cellular accumulation is responsible for the evolved BAC tolerance in the BAC tolerant E. coli strain and that NBD-DDA is subject to efflux mediated by TolC. Overall, NBD-DDA’s antimicrobial activity, its fluorescent properties, and its ease of detection render it a powerful tool to study resistance mechanisms of QACs in bacteria and highlight its potential to gain detailed insights into its mode-of-action.
KW - Antimicrobial resistance
KW - Bacteria
KW - Disinfection
KW - Biocides
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-563811
DO - https://doi.org/10.3389/fmicb.2022.1023326
SN - 1664-302X
IS - 13
SP - 1
EP - 13
PB - Frontiers Media
CY - Lausanne
AN - OPUS4-56381
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rua-Ibarz, Ana
A1 - Nakadi, Flávio V.
A1 - Bolea-Fernandez, Eduardo
A1 - Bazo, Antonio
A1 - Battistella, Beatrice
A1 - Matiushkina, Anna
A1 - Resch-Genger, Ute
A1 - Abad Andrade, Carlos Enrique
A1 - Resano, Martín
T1 - Discrete entity analysis via microwave-induced nitrogen plasma–mass spectrometry in single-event mode
N2 - In this work, single-event microwave-induced nitrogen plasma–mass spectrometry (single-event MINP-MS) was evaluated for the first time for the analysis of discrete entities such as nanoparticles, biological cells, and microplastics. Nitrogen (N2) effectively overcomes Ar-based polyatomic interferences, enabling (ultra)trace element determination of Fe and Se using their most abundant isotopes, 56Fe (91.66%) and 80Se (49.82%). Iron oxide nanoparticles (Fe2O3 NPs) ranging from 20 to 70 nm were accurately characterized, with excellent agreement with established sizing techniques, such as transmission electron microscopy (TEM) and dynamic light scattering (DLS). A limit of detection (LoD) of 8.6 ag for Fe─equivalent to an LoDsize of 19 nm for Fe2O3─was achieved, which is significantly lower than recent values reported for high-end quadrupole-based ICP-MS. Selenium nanoparticles (SeNPs) of 150 and 250 nm were also accurately characterized, without the N2-based plasma experiencing issues handling relatively large metallic NPs (linearity, R2 = 0.9994). Se-enriched yeast cells (SELM-1 certified reference material) were successfully analyzed via single-cell MINP-MS using external calibration based on SeNPs and a transport efficiency-independent approach. In addition, 2–3 μm polystyrene (PS) and polytetrafluoroethylene (PTFE) were accurately sized by monitoring 12C+, confirming the method’s suitability for handling micrometer-sized polymeric materials (microplastics). The average duration of individual events (680 ± 160 μs) suggests that the digestion of individual entities in N2-based plasmas is comparable to that in Ar-based plasmas. These results open new avenues for this instrumentation as an alternative to ICP ionization sources, also in the context of discrete entity analysis.
KW - Microwave-Induced Nitrogen Plasma
KW - Discrete entity analysis
KW - Particle/droplet event counting
KW - Comparison to SP-ICP-MS methodologies
KW - Nitrogen plasma vs. argon ICP trade-offs
KW - Trace elemental quantification at the single-entity level
KW - Time-resolved mass spectrometry for discrete entities
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643825
DO - https://doi.org/10.1021/acs.analchem.5c04341
SN - 0003-2700
SP - 1
EP - 8
PB - American Chemical Society (ACS)
AN - OPUS4-64382
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Morcillo, Dalia
A1 - Winckelmann, Alexander
A1 - Oelze, Marcus
A1 - Leonhardt, Robert
A1 - Schmidt, Anita
A1 - Richter, Silke
A1 - Recknagel, Sebastian
A1 - Vogl, Jochen
A1 - Panne, Ulrich
A1 - Abad Andrade, Carlos Enrique
T1 - Exploring Age-Induced Lithium Isotope Fractionation in Lithium-Ion Batteries using Microwave-Induced Cold Nitrogen Plasma Mass Spectrometry
N2 - This study explores Microwave-Inductively Coupled Atmospheric-pressure Plasma Mass Spectrometry (MICAP-MS) as a cost-effective alternative to Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS) for analyzing lithium isotopic composition in lithium-ion batteries (LIBs). We investigate the performance of MICAP-MS in measuring Li isotope ratios in new and aged commercial lithium cobalt oxide (LCO) batteries. Our results show that MICAP-MS, operating under cold plasma conditions at 800 W with an 8 mm torch position, achieves results metrologically compatible with MC-ICP-MS, with a precision ranging from 0.6‰ to 3.4‰ for δ7Li values. MICAP-MS benefits from a dielectric resonator for uniform plasma, better ion velocity control, and higher energy efficiency. Optimal settings were identified with dwell times of 10 ms for 6Li and 1 ms for 7Li. The study of LIBs revealed that 6Li migrates towards the anode over multiple charge–discharge cycles, causing 7Li to accumulate in the cathode, a fractionation effect that becomes more pronounced with prolonged cycling. MICAP-MS provides a cost-effective, precise alternative to MC-ICP-MS, with lower operational costs and enhanced portability, advancing the study of isotopic fractionation and aging in lithium-ion batteries.
KW - MICAP-MS
KW - Lithium
KW - Battery aging
KW - Lithium isotopes
KW - Nitrogen plasma
KW - Isotope fractionation
KW - lithium cobalt oxide
KW - LCO
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643777
DO - https://doi.org/10.1039/d4ja00324a
SN - 0267-9477
SP - 1
EP - 11
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-64377
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Abad Andrade, Carlos Enrique
A1 - Jegielka, Dennis
A1 - Aloysius, Allen
A1 - Recknagel, Sebastian
T1 - SI-traceable total analysis of nitrate and nitrite by isotope dilution optical spectroscopy and its application to Berlin surface waters
N2 - Accurate nitrate and nitrite data support water-quality regulation, yet routine methods rely on external calibration and rarely achieve SI traceability. We report a calibration-free determination of nitrate and nitrite by combining isotope dilution with high-resolution continuum-source graphite furnace molecular absorption spectrometry (ID-HR-CS-GF-MAS). A 15N-enriched nitrate spike (its concentration verified by reverse isotope dilution against the standard reference material NIST 3185) provides the SI link, and it is gravimetrically added to samples; nitrate and residual nitrite are converted in situ to nitric oxide (NO), whose 215 nm band is recorded at a pixel resolution of λ/Δλ ≈ 140 000. The 0.2127 nm shift between 14NO and 15NO electronic spectra is resolved, and a three-latent-variable partial least squares regression model yields the 15N/14N ratio with 0.3% precision. Instrumental LoD values of 4.8 ng (14N) and 3.2 ng (15N) translate to a method LoD of 4.8 ng of nitrogen (equivalent to 1.05 mg L−1 NO3− for a 20 μL aliquot). The furnace program allows for successive drying/pyrolysis loops, so additional 20 μL aliquots can be layered onto the graphite platform. Alternatively, a 10 mL anion-exchange solid-phase extraction step concentrates nitrate and nitrite fivefold, allowing for the analysis of even lower sample concentrations. Results for four certified reference materials (2.9 to 1000 mg L−1 NO3−) agreed with certified values, giving relative expanded uncertainties of 2 to 4%. Analysis of twenty Berlin surface-water samples revealed concentrations ranging from 0.10 to 7.3 mg L−1 NO3−, indicating that the Panke River and Teltow Canal are the primary sources of nitrogen. ID-HR-CS-GF-MAS thus delivers ID-MS-level accuracy in a few minutes per run with bench-top optics, and, with optional on-platform or SPE pre-concentration, extends SI-traceable nitrate/nitrite monitoring into the low-ng regime.
KW - Isotope dilution
KW - Nitrate and nitrite determination
KW - SI-traceable quantification
KW - Calibration-free analysis
KW - Water quality
KW - Berlin surface waters
KW - NO molecular absorption bands
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-643785
DO - https://doi.org/10.1039/D5JA00252D
SN - 0267-9477
VL - 40
IS - 10
SP - 2692
EP - 2701
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-64378
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Klinge, A
A1 - Mönig, J
A1 - Ziegert, C
A1 - Richter, Matthias
A1 - Kalbe, Ute
A1 - Horn, Wolfgang
A1 - Röhlen, U
A1 - Rauscher, S
A1 - Roswag-Klinge, E
T1 - upMIN 100 – upcycling of mineral construction and demolition waste to substitute natural aggregates in earthen building materials
N2 - The construction sector is one of the most resource-intensive sectors in Germany and is responsible for 40 % of CO2 emissions. Around 517 million tons of mineral raw materials are required annually for the construction of buildings in Germany. At the same time, mineral construction waste was the largest material flow at 229.3 million tons (2020). The rates of construction and demolition waste (CDW) recycling have increased since 2000, especially for mineral waste. Nevertheless, the majority of recycled aggregates are used in technically largely unregulated applications (e.g. road construction). This downcycling leads to a loss of valuable resources for technically and economically valuable applications. The upMIN 100 research project is investigating the question of whether and to what extent recycled CDW is suitable as an additive an binder in earthen building materials. The focus is placed on grain sizes of < 2 mm, which are currently predominantly landfilled, as there are at present no regulations for their use in building products. The soil matrix of earthen building materials however, naturally contains of different grain sizes, whith < 2mm – 0,063 for aggregates and < 0.063 mm as a binder. Therefore, the focused grain sizes (sand, clay and silt) could have a high usage potential. In order to enable the use of CDW, the technical feasibility must be ensured, quality requirements for source materials (e.g. threshold values for pollutants in terms of health and environmental compatibility and hazardous substances) and permissible proportions of recycled aggregates must be defined. Two different building material developments (earth blocks and -plaster)were used to assess both, the technical feasibility as well the pollutant content of the recycled aggregate and its final emissions into the indoor air. For both materials two mixtures could be established, that also meet the mechanical specifications according to the DIN standard, such as the compressive strength. A method was developed to design material mixtures with a high amount of CDW that comply with the defined limit values. The mixtures reached a recycling rate of 28 % with high mechanical properties and 70 % with minimum strength requirements.
KW - Mineral waste
KW - Upcycling
KW - Earthen building product
KW - Circular construction
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-652831
DO - https://doi.org/10.1088/1755-1315/1554/1/012084
SN - 1755-1307
VL - 1554
IS - 1
SP - 1
EP - 9
PB - IOP Publishing
AN - OPUS4-65283
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tavernaro, Isabella
A1 - Rajotte, Isabelle
A1 - Thibeault, Marie-Pier
A1 - Sander, Philipp C.
A1 - Kodra, Oltion
A1 - Lopinski, Gregory
A1 - Radnik, Jörg
A1 - Johnston, Linda J.
A1 - Brinkmann, Andreas
A1 - Resch-Genger, Ute
T1 - Quantifying surface groups on aminated silica nanoparticles of different size, surface chemistry, and porosity with solution NMR, XPS, optical assays, and potentiometric titration
N2 - We assessed the quantification of surface amino functional groups (FGs) for a large set of commercial and custom-made aminated silica nanoparticles (SiO2 NPs) with sizes of 20–100 nm, prepared with different sol–gel routes, different amounts of surface amino FGs, and different porosity with four methods providing different, yet connected measurands in a bilateral study of two laboratories, BAM and NRC, with the overall aim to develop standardizable measurements for surface FG quantification. Special emphasis was dedicated to traceable quantitative magnetic resonance spectroscopy (qNMR) performed with dissolved SiO2 NPs. For the cost efficient and automatable screening of the amount of surface amino FGs done in a first step of this study, the optical fluorescamine assay and a potentiometric titration method were utilized by one partner, i.e., BAM, yielding the amount of primary amino FGs accessible for the reaction with a dye precursor and the total amount of (de)protonatable FGs. These measurements, which give estimates of the minimum and maximum number of surface amino FGs, laid the basis for quantifying the amount of amino silane molecules with chemo-selective qNMR with stepwise fine-tuned workflows, involving centrifugation, drying, weighting, dissolution, measurement, and data evaluation steps jointly performed by BAM and NRC. Data comparability and relative standard deviations (RSDs) obtained by both labs were used as quality measures for method optimization and as prerequisites to identify method-inherent limitations to be later considered for standardized measurement protocols. Additionally, the nitrogen (N) to silicon (Si) ratio in the near-surface region of the SiO2 NPs was determined by both labs using X-ray photoelectron spectroscopy (XPS), a well established surface sensitive analytical method increasingly utilized for microparticles and nano-objects which is currently also in the focus of international standardization activities. Overall, our results underline the importance of multi-method characterization studies for quantifying FGs on NMs involving at least two expert laboratories for effectively identifying sources of uncertainty, validating analytical methods, and deriving NM structure–property relationships.
KW - Advanced Materials
KW - Amino Groups
KW - Calibration
KW - Characterization
KW - Functional groups
KW - Method Comparison
KW - Nano Particle
KW - Validation
KW - XPS
KW - Optical Assay
KW - Quantification
KW - Surface Analysis
KW - Reference Materials
KW - Synthesis
KW - Fluorescence
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-649992
DO - https://doi.org/10.1039/d5na00794a
VL - 7
IS - 21
SP - 6888
EP - 6900
PB - Royal Society of Chemistry
AN - OPUS4-64999
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Schusterbauer, Robert
A1 - Schünemann, Pia
A1 - Nickl, Philip
A1 - Er, Jasmin
A1 - Kämmer, Victoria
A1 - Junge, Florian
A1 - Fazzani, Salim
A1 - Mrkwitschka, Paul
A1 - Meermann, Björn
A1 - Haag, Rainer
A1 - Donskyi, Ievgen
T1 - Bifunctional Reduced Graphene Oxide Derivatives for PFOA Adsorption
N2 - Innovative materials are crucial for removing persistent pollutants per‐ and polyfluorinated alkyl substances (PFAS) from water. Here, a novel bifunctional reduced graphene oxide (TRGO) adsorbent is developed and characterized by advanced surface sensitive methods. Compared to pristine TRGO, the functionalized TRGO shows markedly improved PFAS removal efficiency and demonstrates strong potential for water purification applications.
KW - Adsorber
KW - PFAS
KW - HR-CS-GFMAS
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-651238
DO - https://doi.org/10.1002/ceur.202500240
SN - 2751-4765
SP - 1
EP - 7
PB - Wiley VHC-Verlag
AN - OPUS4-65123
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kazlagić, Anera
A1 - Vogl, Jochen
A1 - Gluth, Gregor
A1 - Stephan, D.
T1 - Provenancing of cement using elemental analyses and isotope techniques – The state-of-the-art and future perspectives
N2 - With the aim of identifying the origin and the manufacturer of a cement, a reliable procedure that provides unambiguous results is needed. Such procedure could resolve practical issues in damage research, liability issues and forensic investigations. A substantial number of attempts for fingerprinting of building materials, including cement, has already been carried out during the last decades. Most of them were based on concentration analysis of the main elements/components. This review provides an overview of provenance studies of cement and the main approaches commonly used. Provenance studies of cement via isotope techniques are also presented and discussed as representatives of the state-of-the-art in the field. Due to the characteristic properties and the occurrence of carefully selected isotope ratios, unique fingerprints of different kinds of materials can be provided by these methods. This property has largely been explored in various scientific fields such as geo- and cosmochemistry, food forensics, archaeology, geochronology, biomedical studies, and climate change processes. However, the potential of isotope techniques in cement and concrete research for provenance studies has barely been investigated.
Therefore, the review outlines a suitable approach using isotope ratios, which could lead to reliable provenancing of cementitious materials in the future.
KW - Cement
KW - Sr isotopes
KW - Provenance
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-533762
DO - https://doi.org/10.1039/d1ja00144b
VL - 36
IS - 10
SP - 2030
EP - 2042
PB - The Royal Society of Chemistry
CY - Cambridge, UK
AN - OPUS4-53376
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weigert, Florian
A1 - Müller, A.
A1 - Häusler, I.
A1 - Geißler, Daniel
A1 - Skroblin, D.
A1 - Unger, Wolfgang
A1 - Radnik, Jörg
A1 - Resch-Genger, Ute
T1 - Combining HR‑TEM and XPS to elucidate the core–shell structure of ultrabright CdSe/CdS semiconductor quantum dots
N2 - Controlling thickness and tightness of surface passivation shells is crucial for many applications of core–shell nanoparticles (NP). Usually, to determine shell thickness, core and core/shell particle are measured individually requiring the availability of both nanoobjects. This is often not fulfilled for functional nanomaterials such as many photoluminescent semiconductor quantum dots (QD) used for bioimaging, solid state lighting, and display technologies as the core does not show the applicationrelevant functionality like a high photoluminescence (PL) quantum yield, calling for a whole nanoobject approach. By combining high-resolution transmission electron microscopy (HR-TEM) and X-ray photoelectron spectroscopy (XPS), a novel whole nanoobject approach is developed representatively for an ultrabright oleic acid-stabilized, thick shell CdSe/CdS QD with a PL quantum yield close to unity. The size of this spectroscopically assessed QD, is in the range of the information depth of usual laboratory XPS. Information on particle size and monodispersity were validated with dynamic light scattering (DLS) and small angle X-ray scattering (SAXS) and compared to data derived from optical measurements. In addition to demonstrating the potential of this novel whole nanoobject approach for determining architectures of small nanoparticles, the presented results also highlight challenges faced by different sizing and structural analysis methods and method-inherent uncertainties.
KW - Photoluminescence
KW - Single particle
KW - Microscopy
KW - Particle architecture
KW - Thickness
KW - SAXS
KW - Shell
KW - XPS
KW - TEM
KW - Semiconductor
KW - Quantum dot
KW - Photophysics
KW - Quantum yield
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517911
DO - https://doi.org/10.1038/s41598-020-77530-z
VL - 10
IS - 1
SP - 20712
PB - Springer Nature
AN - OPUS4-51791
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Radnik, Jörg
A1 - Knigge, Xenia
A1 - Andresen, Elina
A1 - Resch-Genger, Ute
A1 - Cant, D.J.H.
A1 - Shard, A.G.
A1 - Clifford, C.A.
T1 - Composition, thickness, and homogeneity of the coating of core–shell nanoparticles—possibilities, limits, and challenges of X-ray photoelectron spectroscopy
N2 - Core–shell nanoparticles have attracted much attention in recent years due to their unique properties and their increasing importance in many technological and consumer products. However, the chemistry of nanoparticles is still rarely investigated in comparison to their size and morphology. In this review, the possibilities, limits, and challenges of X-ray photoelectron spectroscopy (XPS) for obtaining more insights into the composition, thickness, and homogeneity of nanoparticle coatings are discussed with four examples: CdSe/CdS quantum dots with a thick coating and a small core; NaYF4-based upconverting nanoparticles with a large Yb-doped core and a thin Er-doped coating; and two types of polymer nanoparticles with a poly(tetrafluoroethylene) core with either a poly(methyl methacrylate) or polystyrene coating. Different approaches for calculating the thickness of the coating are presented, like a simple numerical modelling or a more complex simulation of the photoelectron peaks. Additionally, modelling of the XPS background for the investigation of coating is discussed. Furthermore, the new possibilities to measure with varying excitation energies or with hard-energy X-ray sources (hard-energy X-ray photoelectron spectroscopy) are described. A discussion about the sources of uncertainty for the determination of the thickness of the coating completes this review.
KW - X-ray spectroscopy
KW - Nanoparticles
KW - Spectroscopy / Instrumentation
KW - Spectroscopy / Theory
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-548305
DO - https://doi.org/10.1007/s00216-022-04057-9
VL - 414
IS - 15
SP - 4331
EP - 4345
PB - SpringerNature
AN - OPUS4-54830
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Junge, Florian
A1 - Wittwer, Philipp
A1 - Sommerfeld, Thomas
A1 - Gehrenkemper, Lennart
A1 - Zoister, Christian
A1 - Nickl, Philip
A1 - Koch, Matthias
A1 - Meermann, Björn
A1 - Haag, Rainer
T1 - Adsorber Charge Dominates over Hydrophobic or Fluorophilic Functionalization in Influencing Adsorption of PFCA onto Polystyrene Resins
N2 - A systematic series of industrial-relevant polystyrene-based anion exchange resins that are functionalized with hydro- or fluorocarbon chains are compared regarding their adsorption behavior toward perfluorocarboxylic acids (PFCA) in respect to their charge, chain length, and type of chain. The results clearly show the dominance of electrostatic interactions in the adsorption process as uncharged adsorber materials showed no adsorption at all. In contrast, the charged adsorber materials showed in general a PFCA removal of 80% to 30% over the experiment depending on effluent fraction.
Unexpectedly, for perfluorobutanoic acid (PFBA) the highest removal rate is found with consistently >90%. Despite observing significant benefits in the adsorption of PFCA for fluoroalkylated adsorbers in comparison to their non-fluorinated counterparts, this effect of fluoroalkylation is comparatively small and can not be clearly attributed to fluorophilic interactions between the fluoroalkyl chains. These findings help clarifying that the introduction of fluorocarbon moieties in adsorber materials is not necessary in order to remove fluorocarbon molecules from the environment.
KW - PFAS
KW - Remediation
KW - Adsorption
KW - Fluorophilic interactions
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601883
DO - https://doi.org/10.1002/admi.202400199
SN - 2196-7350
SP - 1
EP - 10
PB - John Wiley & Sons
CY - Hoboken, New Jersey, USA
AN - OPUS4-60188
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Mangarova, Dilyana B.
A1 - Kaufmann, Jan Ole
A1 - Brangsch, Julia
A1 - Kader, Avan
A1 - Möckel, Jana
A1 - Heyl, Jennifer L.
A1 - Verlemann, Christine
A1 - Adams, Lisa C.
A1 - Ludwig, Antje
A1 - Reimann, Carolin
A1 - Poller, Wolfram C.
A1 - Niehaus, Peter
A1 - Karst, Uwe
A1 - Taupitz, Matthias
A1 - Hamm, Bernd
A1 - Weller, Michael G.
A1 - Makowski, Marcus R.
T1 - ADAMTS4-Specific MR Peptide Probe for the Assessment of Atherosclerotic Plaque Burden in a Mouse Model
N2 - Introduction
Atherosclerosis is the underlying cause of multiple cardiovascular pathologies. The present-day clinical imaging modalities do not offer sufficient information on plaque composition or rupture risk. A disintegrin and metalloproteinase with thrombospondin motifs 4 (ADAMTS4) is a strongly upregulated proteoglycan-cleaving enzyme that is specific to cardiovascular diseases, inter alia, atherosclerosis.
Materials and Methods
Male apolipoprotein E-deficient mice received a high-fat diet for 2 (n = 11) or 4 months (n = 11). Additionally, a group (n = 11) receiving pravastatin by drinking water for 4 months alongside the high-fat diet was examined. The control group (n = 10) consisted of C57BL/6J mice on standard chow. Molecular magnetic resonance imaging was performed prior to and after administration of the gadolinium (Gd)-based ADAMTS4-specific probe, followed by ex vivo analyses of the aortic arch, brachiocephalic arteries, and carotid arteries. A P value <0.05 was considered to indicate a statistically significant difference.
Results
With advancing atherosclerosis, a significant increase in the contrast-to-noise ratio was measured after intravenous application of the probe (mean precontrast = 2.25; mean postcontrast = 11.47, P < 0.001 in the 4-month group). The pravastatin group presented decreased ADAMTS4 expression. A strong correlation between ADAMTS4 content measured via immunofluorescence staining and an increase in the contrast-to-noise ratio was detected (R2 = 0.69). Microdissection analysis revealed that ADAMTS4 gene expression in the plaque area was significantly greater than that in the arterial wall of a control mouse (P < 0.001). Laser ablation–inductively coupled plasma–mass spectrometry confirmed strong colocalization of areas positive for ADAMTS4 and Gd.
Conclusions
Magnetic resonance imaging using an ADAMTS4-specific agent is a promising method for characterizing atherosclerotic plaques and could improve plaque assessment in the diagnosis and treatment of atherosclerosis.
N2 - Einleitung
Atherosklerose ist die Ursache für zahlreiche Herz-Kreislauf-Erkrankungen. Die derzeitigen klinischen Bildgebungsverfahren liefern keine ausreichenden Informationen über die Zusammensetzung von Plaques oder das Risiko einer Ruptur. A Disintegrin and Metalloproteinase with Thrombospondin Motifs 4 (ADAMTS4) ist ein stark hochreguliertes Proteoglykan-spaltendes Enzym, das unter anderem bei Herz-Kreislauf-Erkrankungen wie Atherosklerose spezifisch auftritt.
Materialien und Methoden
Männliche Apolipoprotein-E-defiziente Mäuse erhielten 2 (n = 11) oder 4 Monate lang (n = 11) eine fettreiche Ernährung. Zusätzlich wurde eine Gruppe (n = 11) untersucht, die 4 Monate lang neben der fettreichen Ernährung Pravastatin über das Trinkwasser erhielt. Die Kontrollgruppe (n = 10) bestand aus C57BL/6J-Mäusen, die mit Standardfutter ernährt wurden. Vor und nach der Verabreichung der gadolinium (Gd)-basierten ADAMTS4-spezifischen Sonde wurde eine molekulare Magnetresonanztomographie durchgeführt, gefolgt von Ex-vivo-Analysen des Aortenbogens, der Arteria brachiocephalica und der Arteria carotis. Ein P-Wert < 0,05 wurde als statistisch signifikanter Unterschied gewertet.
Ergebnisse
Mit fortschreitender Atherosklerose wurde nach intravenöser Anwendung der Sonde ein signifikanter Anstieg des Kontrast-Rausch-Verhältnisses gemessen (Mittelwert vor Kontrastmittelgabe = 2,25; Mittelwert nach Kontrastmittelgabe = 11,47, P < 0,001 in der 4-Monats-Gruppe). Die Pravastatin-Gruppe zeigte eine verminderte ADAMTS4-Expression. Es wurde eine starke Korrelation zwischen dem mittels Immunfluoreszenzfärbung gemessenen ADAMTS4-Gehalt und einem Anstieg des Kontrast-Rausch-Verhältnisses festgestellt (R2 = 0,69). Die Mikrodissektionsanalyse ergab, dass die ADAMTS4-Genexpression im Plaque-Bereich signifikant höher war als in der Arterienwand einer Kontrollmaus (P < 0,001). Laserablation-induktiv gekoppelte Plasma-Massenspektrometrie bestätigte eine starke Kolokalisierung von ADAMTS4- und Gd-positiven Bereichen.
Schlussfolgerungen
Die Magnetresonanztomographie mit einem ADAMTS4-spezifischen Kontrastmittel ist eine vielversprechende Methode zur Charakterisierung atherosklerotischer Plaques und könnte die Plaquebewertung in der Diagnose und Behandlung von Atherosklerose verbessern.
KW - Peptide Aptamer
KW - MRI Probe
KW - Magnetic resonance imaging (MRI)
KW - Peptide libraries
KW - Laser ablation–inductively coupled plasma–mass spectrometry
KW - ICP MS
KW - Imaging
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-635832
DO - https://doi.org/10.1097/RLI.0000000000001152
SN - 1536-0210
VL - 60
IS - 8
SP - 499
EP - 507
PB - Ovid Technologies (Wolters Kluwer Health)
CY - Philadelphia, Pennsylvania, USA
AN - OPUS4-63583
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Döring, Sarah
A1 - Konthur, Zoltán
A1 - Weller, Michael G.
A1 - Jaeger, Carsten
A1 - Reinders, Yvonne
T1 - Challenges and Insights in Absolute Quantification of Recombinant Therapeutic Antibodies by Mass Spectrometry: An Introductory Review
N2 - This review describes mass spectrometry (MS)-based approaches for the absolute quantification of therapeutic monoclonal antibodies (mAbs), focusing on technical challenges in sample treatment and calibration. Therapeutic mAbs are crucial for treating cancer and inflammatory, infectious, and autoimmune diseases. We trace their development from hybridoma technology and the first murine mAbs in 1975 to today’s chimeric and fully human mAbs. With increasing commercial relevance, the absolute quantification of mAbs, traceable to an international standard system of units (SI units), has attracted attention from science, industry, and national metrology institutes (NMIs). Quantification of proteotypic peptides after enzymatic digestion using high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) has emerged as the most viable strategy, though methods targeting intact mAbs are still being explored. We review peptide-based quantification, focusing on critical experimental steps like denaturation, reduction, alkylation, choice of digestion enzyme, and selection of signature peptides. Challenges in amino acid analysis (AAA) for quantifying pure mAbs and peptide calibrators, along with software tools for targeted MS data analysis, are also discussed. Short explanations within each chapter provide newcomers with an overview of the field’s challenges. We conclude that, despite recent progress, further efforts are needed to overcome the many technical hurdles along the quantification workflow and discuss the prospects of developing standardized protocols and certified reference materials (CRMs) for this goal. We also suggest future applications of newer technologies for absolute mAb quantification.
KW - Monoclonal antibody
KW - Therapeutic antibodies
KW - Mass spectrometry
KW - Liquid chromatography
KW - Absolute quantification
KW - Metrology
KW - Traceability
KW - Certified reference material
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-623707
DO - https://doi.org/10.3390/antib14010003
SN - 2073-4468
VL - 14
IS - 1
SP - 1
EP - 26
PB - MDPI
CY - Basel, Schweiz
AN - OPUS4-62370
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bosc-Bierne, Gaby
A1 - Weller, Michael G.
T1 - Investigation of impurities in peptide pools
T1 - Untersuchung von Verunreinigungen in Peptidpools
N2 - Peptide pools are important research tools in different biomedical fields. They consist of a complex mixture of defined peptides, which places high demands on the production and quality control of these products. Previously it has been shown that the combination of UHPLC with high-resolution mass-spectrometry (HRMS) is a fast and powerful method to confirm the relative concentration and the structural identity of all peptides expected to be in the pool. In this work, the additional information contained in the UV chromatograms and mass spectra is used to search for impurities due to synthesis by-products and degradation during storage and transportation and to identify possible analytical artifacts. It was shown that most impurities are only present in trace amounts and can be considered uncritical for most applications. The most frequent and perhaps unexpected impurities were homo- and heterodimers caused by the free cysteines contained in these peptide pools. Furthermore, pyroglutamate and aspartimide formation, deamidation, methionine oxidation, and amino acid deletions could be found. This list is not intended to be comprehensive, but rather a brief guide to quickly identify impurities and, in the long term, to suggest possible changes in the composition of the peptide pools to avoid such impurities by design or by special precautions.
N2 - Peptidpools sind wichtige Forschungsinstrumente in verschiedenen biomedizinischen Bereichen. Sie bestehen aus einer komplexen Mischung definierter Peptide, was hohe Anforderungen an die Herstellung und Qualitätskontrolle dieser Produkte stellt. In der Vergangenheit wurde gezeigt, dass die Kombination von UHPLC mit hochauflösender Massenspektrometrie (HRMS) eine schnelle und leistungsfähige Methode zur Bestätigung der relativen Konzentration und der strukturellen Identität aller Peptide ist, die in dem Pool erwartet werden. In dieser Arbeit werden die zusätzlichen Informationen, die in den UV-Chromatogrammen und Massenspektren enthalten sind, genutzt, um nach Verunreinigungen zu suchen, die auf Nebenprodukte der Synthese und den Abbau während der Lagerung und des Transports zurückzuführen sind, und um mögliche analytische Artefakte zu identifizieren. Es hat sich gezeigt, dass die meisten Verunreinigungen nur in Spuren vorhanden sind und für die meisten Anwendungen als unkritisch angesehen werden können. Die häufigsten und vielleicht unerwartetsten Verunreinigungen waren Homo- und Heterodimere, die durch die in diesen Peptidpools enthaltenen freien Cysteine verursacht werden. Außerdem wurden Pyroglutamat- und Aspartimidbildung, Deamidierung, Methioninoxidation und Aminosäuredeletionen festgestellt. Diese Liste erhebt keinen Anspruch auf Vollständigkeit, sondern ist eher ein kurzer Leitfaden, um Verunreinigungen schnell zu identifizieren und langfristig mögliche Änderungen in der Zusammensetzung der Peptidpools vorzuschlagen, um solche Verunreinigungen durch Design oder besondere Vorsichtsmaßnahmen zu vermeiden.
KW - Synthetic peptides
KW - Degradation
KW - Synthetic artifacts
KW - Peptide losses
KW - Stability of peptides
KW - Disulfide dimers
KW - Cysteine dimers
KW - Isomers
KW - Cysteine alkylation
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626987
DO - https://doi.org/10.3390/separations12020036
SN - 2297-8739
VL - 12
IS - 2
SP - 1
EP - 18
PB - MDPI AG
CY - Basel
AN - OPUS4-62698
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bhattacharya, Biswajit
A1 - Michalchuk, Adam
A1 - Silbernagl, Dorothee
A1 - Rautenberg, Max
A1 - Schmid, Thomas
A1 - Feiler, Torvid
A1 - Reimann, K.
A1 - Ghalgaoui, A.
A1 - Sturm, Heinz
A1 - Paulus, B.
A1 - Emmerling, Franziska
T1 - A Mechanistic Perspective on Plastically Flexible Coordination Polymers
N2 - Mechanical flexibility in single crystals of covalently bound materials is a fascinating and poorly understood phenomenon. We present here the first example of a plastically flexible one-dimensional (1D) coordination polymer. The compound [Zn(m-Cl)2(3,5-dichloropyridine)2]n is flexible over two crystallographic faces. Remarkably, the single crystal remains intact when bent to 1808. A combination of microscopy, diffraction, and spectroscopic studies have been used to probe the structural response of the crystal lattice to mechanical bending. Deformation of the covalent polymer chains does not appear to be responsible for the observed macroscopic bending. Instead, our results suggest that mechanical bending occurs by displacement of the coordination polymer chains. Based on experimental and theoretical evidence, we propose a new model for mechanical flexibility in 1D coordination polymers. Moreover, our calculations propose a cause of the different mechanical properties of this compound and a structurally similar elastic material
KW - Coordination polymer
KW - Flexible crystals
KW - Mechanical properties
KW - Plastic deformation
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-504755
DO - https://doi.org/10.1002/anie.201914798
VL - 59
IS - 14
SP - 5557
EP - 5561
PB - Wiley-VCH
AN - OPUS4-50475
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bornemann-Pfeiffer, Martin
A1 - Wolf, Jakob
A1 - Meyer, Klas
A1 - Kern, S.
A1 - Angelone, D.
A1 - Leonov, A.
A1 - Cronin, L.
A1 - Emmerling, Franziska
T1 - Standardization and control of Grignard reactions in a universal chemical synthesis machine using online NMR
T1 - Standardisierung und Kontrolle von Grignard-Reaktionen mittels Online-NMR in einer universellen chemischen Syntheseplattform
N2 - A big problem with the chemistry literature is that it is not standardized with respect to precise operational parameters, and real time corrections are hard to make without expert knowledge. This lack of context means difficult reproducibility because many steps are ambiguous, and hence depend on tacit knowledge. Here we present the integration of online NMR into an automated chemical synthesis machine (CSM aka. “Chemputer” which is capable of small-molecule synthesis using a universal programming language) to allow automated analysis and adjustment of reactions on the fly. The system was validated and benchmarked by using Grignard reactions which were chosen due to their importance in synthesis. The system was monitored in real time using online-NMR, and spectra were measured continuously during the reactions. This shows that the synthesis being done in the Chemputer can be dynamically controlled in response to feedback optimizing the reaction conditions according to the user requirements.
N2 - Ein Problem der chemischen Literatur ist die fehlende Standardisierung bezüglich genauer Bedingungen, auch Echtzeit-Korrekturen sind ohne Expertenwissen nur schwer möglich. Dieser Mangel an Details erschwert experimentelle Reproduzierbarkeit, da Schritte oft mehrdeutig sind und daher von implizitem Wissen abhängen. Hier präsentieren wir die Integration von Online-NMR Spektroskopie in eine automatisierte chemische Syntheseplattform (CSM aka. “Chemputer”, unter Verwendung einer universellen Programmiersprache zur Synthese kleiner Moleküle fähig), um eine automatisierte Analyse und Anpassung von Reaktionen im laufenden Betrieb zu ermöglichen. Das System wurde anhand von Grignard-Reaktionen, die aufgrund ihrer Bedeutung für die Synthese ausgewählt wurden, validiert und einem Härtetest unterzogen. Synthesen wurden in Echtzeit mit Online-NMR überwacht, und die Spektren wurden während der Reaktionen kontinuierlich aufgenommen und analysiert. Dies zeigt, dass der Chemputer dynamisch mittels einer Regelung kontrolliert werden kann, um die Reaktionsbedingungen entsprechend den Anforderungen des Benutzers zu optimieren.
KW - Grignard reaction
KW - NMR spectroscopy
KW - Process analytical technology
KW - Process control
KW - Grignard-Reaktion
KW - NMR-Spektroskopie
KW - Prozessanalytik
KW - Prozesskontrolle
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-531260
DO - https://doi.org/10.1002/anie.202106323
SN - 1521-3773
SN - 1433-7851
N1 - Bibliografische Angaben für die deutsche Version: Angewandte Chemie 2021, Jg. 133, S. 1–7, ISSN 0044-8249, ISSN 1521-3757, https://doi.org/10.1002/ange.202106323 - Bibliographic information for the German version: Angewandte Chemie 2021, vol. 133, p. 1–7, ISSN 0044-8249, ISSN 1521-3757, https://doi.org/10.1002/ange.202106323
VL - 60
IS - 43
SP - 1
EP - 6
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-53126
LA - mul
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Martins, Ines
A1 - Al-Sabbagh, Dominik
A1 - Bentrup, U.
A1 - Marquardt, Julien
A1 - Schmid, Thomas
A1 - Scoppola, E.
A1 - Kraus, Werner
A1 - Stawski, Tomasz
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Yusenko, Kirill
A1 - Weidner, Steffen
A1 - Emmerling, Franziska
T1 - Formation Mechanism of a Nano-Ring of Bismuth Cations and Mono-Lacunary Keggin-Type Phosphomolybdate
N2 - A new hetero-bimetallic polyoxometalate (POM) nano-ring was synthesized in a one-pot procedure. The structure consists of tetrameric units containing four bismuth-substituted monolacunary Keggin anions including distorted [BiO8] cubes. The nano-ring is formed via self-assembly from metal precursors in aqueous acidic medium. The compound (NH4)16[(BiPMo11O39)4] ⋅ 22 H2O; (P4Bi4Mo44) was characterized by single-crystal X-ray diffraction, extended X-ray absorption fine structure spectroscopy (EXAFS), Raman spectroscopy, matrix-assisted laser desorption/ionisation-time of flight mass spectrometry (MALDI-TOF), and thermogravimetry/differential scanning calorimetry mass spectrometry (TG-DSC-MS). The formation of the nano-ring in solution was studied by time-resolved in situ small- and wide-angle X-ray scattering (SAXS/WAXS) and in situ EXAFS measurements at the Mo−K and the Bi−L3 edge indicating a two-step process consisting of condensation of Mo-anions and formation of Bi−Mo-units followed by a rapid self-assembly to yield the final tetrameric ring structure.
KW - Bismuth
KW - In situ EXAFS
KW - In situ SAXS/WAXS
KW - Lacunary Keggin ion
KW - Polyoxometalates
KW - Self-assembly
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-546823
DO - https://doi.org/10.1002/chem.202200079
SN - 0947-6539
VL - 28
IS - 27
SP - 1
EP - 7
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-54682
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Zänker, Steffen
A1 - Scholz, G.
A1 - Marquardt, Julien
A1 - Emmerling, Franziska
T1 - Structural changes in Ba-compounds of different hardness induced by high-energy ball milling – evidenced by 137Ba NMR and X-ray powder diffraction
N2 - Changes in the global bulk and local structures, of three different barium compounds (BaZrO3, BaF2, and BaFCl),were induced by mechanical milling and followed using X-ray powder diffraction (PXRD), subsequent microstructure analysis, and 137Ba solid state NMR spectroscopy. Harder materials like BaZrO3 experience significantly higher structural changes upon milling than softer materials like BaF2. Moreover, soft materials with layered structures, like BaFCl, show a pronounced structural change during the milling process. By combining PXRD and solid state NMR, detailed information on the changes to the global and local structures were obtained, which are of interest for mechanochemical synthesis, mechanically treated catalysts or ionic conductors.
KW - Mechanochemistry
KW - X-ray diffraction
KW - Solid state NMR
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-547397
DO - https://doi.org/10.1002/zaac.202200026
SN - 0044-2313
VL - 648
IS - 10
SP - 1
EP - 8
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-54739
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gugin, Nikita
A1 - Villajos Collado, José Antonio
A1 - Feldmann, Ines
A1 - Emmerling, Franziska
T1 - Mix and wait – a relaxed way for synthesizing ZIF-8
N2 - Herein we report the synthesis of a zeolitic imidazolate framework (ZIF-8) by an easy “mix and wait” procedure. In a closed vial, without any interference, the mixture of 2-methylimidazole and basic zinc carbonate assembles into the crystalline product with approx. 90% conversion after 70 h. The reaction exhibits sigmoidal kinetics due to the self-generated water which accelerates the reaction.
KW - In-situ analysis
KW - Mechanochemistry
KW - MOF
KW - Synthesis
KW - ZIF-8
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-546841
DO - https://doi.org/10.1039/D2RA00740A
VL - 12
SP - 8940
EP - 8944
PB - Royal Society of Chemistry
AN - OPUS4-54684
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Miliūtė, Aistė
A1 - Bustamante, Joana
A1 - Karafiludis, Stephanos
A1 - Zöllner, Moritz
A1 - Eddah, Mustapha
A1 - Emmerling, Franziska
A1 - Mieller, Björn
A1 - George, Janine
A1 - Stawski, Tomasz M.
T1 - Synthesis and phase purity of the negative thermal expansion material ZrV2O7
N2 - Synthesis of pure, homogeneous, and reproducible materials is key for the comprehensive understanding, design, and tailoring of material properties. In this study, we focus on the synthesis of ZrV2O7, a material known for its negative thermal expansion properties. We investigate the influence of solid-state and wet chemistry synthesis methods on the purity and homogeneity of ZrV2O7 samples. Our findings indicate that different synthesis methods significantly impact the material's characteristics. The solid-state reaction provided high-purity material through extended milling time and repeated calcination cycles, while the sol-gel reaction enabled a “near-atomic” level of mixing and, therefore, homogenous phase-pure ZrV2O7. We confirmed purity via X-ray diffraction and Raman spectroscopy, highlighting differences between phase-pure and multiphase ceramics. These analytical techniques allowed us to distinguish subtle differences in the structure of the material. Based on ab initio simulated phonon data, we were able to interpret the Raman spectra and visualise Raman active atom vibrations. We show that phase purity enables the unbiased characterisation of material properties such as negative thermal expansion.
KW - NTE
KW - Sol-gel
KW - Solid-state
KW - Ab-initio
KW - XRD
KW - Raman
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-624013
DO - https://doi.org/10.1039/d4tc04095c
SN - 2050-7534
SP - 1
EP - 13
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-62401
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Steglich, P.
A1 - Bondarenko, S.
A1 - Mai, C.
A1 - Paul, Martin
A1 - Weller, Michael G.
A1 - Mai, A.
T1 - CMOS-Compatible Silicon Photonic Sensor for Refractive Index Sensing Using Local Back-Side Release
N2 - Silicon photonic sensors are promising candidates for lab-on-a-chip solutions with versatile applications and scalable production prospects using complementary metal-oxide semiconductor (CMOS) fabrication methods. However, the widespread use has been hindered because the sensing area adjoins optical and electrical components making packaging and sensor handling challenging. In this work, a local back-side release of the photonic sensor is employed, enabling a separation of the sensing area from the rest of the chip. This approach allows preserving the compatibility of photonic integrated circuits in the front-end of line and metal interconnects in the back-end of line. The sensor is based on a micro-ring resonator and is fabricated on wafer-level using a CMOS technology. We revealed a ring resonator sensitivity for homogeneous sensing of 106 nm/RIU.
KW - Photonic biosensor
KW - Lab-on-a-chip
KW - Ring resonator
KW - Resonance wavelength shift
KW - PIC technology
KW - Back-side integration
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517139
DO - https://doi.org/10.1109/LPT.2020.3019114
VL - 32
IS - 19
SP - 1241
EP - 1244
PB - IEEE
AN - OPUS4-51713
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tscheuschner, Georg
A1 - Kaiser, Melanie N.
A1 - Lisec, Jan
A1 - Beslic, D.
A1 - Muth, Thilo
A1 - Krüger, M.
A1 - Mages, H. W.
A1 - Dorner, B. G.
A1 - Knospe, J.
A1 - Schenk, J. A.
A1 - Sellrie, F.
A1 - Weller, Michael G.
T1 - MALDI-TOF-MS-Based Identification of Monoclonal Murine Anti-SARS-CoV-2 Antibodies within One Hour
N2 - During the SARS-CoV-2 pandemic, many virus-binding monoclonal antibodies have been developed for clinical and diagnostic purposes. This underlines the importance of antibodies as universal bioanalytical reagents. However, little attention is given to the reproducibility crisis that scientific studies are still facing to date. In a recent study, not even half of all research antibodies mentioned in publications could be identified at all. This should spark more efforts in the search for practical solutions for the traceability of antibodies. For this purpose, we used 35 monoclonal antibodies against SARS-CoV-2 to demonstrate how sequence-independent antibody identification can be achieved by simple means applied to the protein. First, we examined the intact and light chain masses of the antibodies relative to the reference material NIST-mAb 8671. Already half of the antibodies could be identified based solely on these two parameters. In addition, we developed two complementary peptide mass fingerprinting methods with MALDI-TOF-MS that can be performed in 60 min and had a combined sequence coverage of over 80%. One method is based on the partial acidic hydrolysis of the protein by 5 mM of sulfuric acid at 99 degrees C. Furthermore, we established a fast way for a tryptic digest without an alkylation step. We were able to show that the distinction of clones is possible simply by a brief visual comparison of the mass spectra. In this work, two clones originating from the same immunization gave the same fingerprints. Later, a hybridoma sequencing confirmed the sequence identity of these sister clones. In order to automate the spectral comparison for larger libraries of antibodies, we developed the online software ABID 2.0. This open-source software determines the number of matching peptides in the fingerprint spectra. We propose that publications and other documents critically relying on monoclonal antibodies with unknown amino acid sequences should include at least one antibody fingerprint. By fingerprinting an antibody in question, its identity can be confirmed by comparison with a library spectrum at any time and context.
KW - Reproducibility
KW - Quality control
KW - Traceability
KW - Peptides
KW - Peptide mass fingerprinting
KW - Monoclonal antibody
KW - Recombinant antibody
KW - Identity
KW - Antibody identification
KW - Sequencing
KW - Light chain
KW - Mass spectrometry
KW - Software
KW - Open science
KW - Library
KW - COVID-19
KW - Corona virus
KW - Sequence coverage
KW - NIST-mAb 8671
KW - Reference material
KW - RBD
KW - Spike protein
KW - Nucleocapsid
KW - Cleavage
KW - Tryptic digest
KW - MALDI
KW - DHAP
KW - 2,5-dihydroxyacetophenone
KW - Github
KW - Zenodo
KW - ABID
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-547347
DO - https://doi.org/10.3390/antib11020027
VL - 11
IS - 2
SP - 1
EP - 22
PB - MDPI
CY - Basel
AN - OPUS4-54734
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kader, A.
A1 - Brangsch, J.
A1 - Reimann, C.
A1 - Kaufmann, Jan Ole
A1 - Mangarova, D. B.
A1 - Moeckel, J.
A1 - Adams, L. C.
A1 - Zhao, J.
A1 - Saatz, Jessica
A1 - Traub, Heike
A1 - Buchholz, R.
A1 - Karst, U.
A1 - Hamm, B.
A1 - Makowski, M. R.
T1 - Visualization and Quantification of the Extracellular Matrix in Prostate Cancer Using an Elastin Specific Molecular Probe
N2 - One of the most commonly diagnosed cancers in men is prostate cancer (PCa). Understanding tumor progression can help diagnose and treat the disease at an early stage. Components of the extracellular matrix (ECM) play a key role in the development and progression of PCa. Elastin is an essential component of the ECM and constantly changes during tumor development. This article visualizes and quantifies elastin in magnetic resonance imaging (MRI) using a small molecule probe. Results were correlated with histological examinations. Using an elastin-specific molecular probe, we were able to make predictions about the cellular structure in relation to elastin and thus draw conclusions about the size of the tumor, with smaller tumors having a higher elastin content than larger tumors.
Human prostate cancer (PCa) is a type of malignancy and one of the most frequently diagnosed cancers in men. Elastin is an important component of the extracellular matrix and is involved in the structure and organization of prostate tissue. The present study examined prostate cancer in a xenograft mouse model using an elastin-specific molecular probe for magnetic resonance molecular imaging. Two different tumor sizes (500 mm3 and 1000 mm3) were compared and analyzed by MRI in vivo and histologically and analytically ex vivo. The T1-weighted sequence was used in a clinical 3-T scanner to calculate the relative contrast enhancement before and after probe administration. Our results show that the use of an elastin-specific probe enables better discrimination between tumors and surrounding healthy tissue. Furthermore, specific binding of the probe to elastin fibers was confirmed by histological examination and laser ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS). Smaller tumors showed significantly higher signal intensity (p > 0.001), which correlates with the higher proportion of elastin fibers in the histological evaluation than in larger tumors. A strong correlation was seen between relative enhancement (RE) and Elastica–van Gieson staining (R2 = 0.88). RE was related to inductively coupled plasma–mass spectrometry data for Gd and showed a correlation (R2 = 0.78). Thus, molecular MRI could become a novel quantitative tool for the early evaluation and detection of PCa.
KW - Magnetic resonance imaging
KW - MRI
KW - Molecular imaging
KW - Cancer
KW - LA-ICP-MS
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-538410
DO - https://doi.org/10.3390/biology10111217
VL - 10
IS - 11
SP - 1
EP - 14
PB - MDPI
CY - Basel
AN - OPUS4-53841
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kader, A.
A1 - Kaufmann, Jan Ole
A1 - Mangarova, D. B.
A1 - Moeckel, J.
A1 - Brangsch, J.
A1 - Adams, L. C.
A1 - Zhao, J.
A1 - Reimann, C.
A1 - Saatz, Jessica
A1 - Traub, Heike
A1 - Buchholz, R.
A1 - Karst, U.
A1 - Hamm, B.
A1 - Makowski, M. R.
T1 - Iron Oxide Nanoparticles for Visualization of Prostate Cancer in MRI
N2 - Prostate cancer (PCa) is one of the most common cancers in men. For detection and diagnosis of PCa, non-invasive methods, including magnetic resonance imaging (MRI), can reduce the risk potential of surgical intervention. To explore the molecular characteristics of the tumor, we investigated the applicability of ferumoxytol in PCa in a xenograft mouse model in two different tumor volumes, 500 mm3 and 1000 mm3. Macrophages play a key role in tumor progression, and they are able to internalize iron-oxide particles, such as ferumoxytol. When evaluating T2*-weighted sequences on MRI, a significant decrease of signal intensity between pre- and post-contrast images for each tumor volume (n = 14; p < 0.001) was measured. We, furthermore, observed a higher signal loss for a tumor volume of 500 mm3 than for 1000 mm3. These findings were confirmed by histological examinations and laser ablation inductively coupled plasma-mass spectrometry. The 500 mm3 tumors had 1.5% iron content (n = 14; sigma = 1.1), while the 1000 mm3 tumors contained only 0.4% iron (n = 14; sigma = 0.2). In vivo MRI data demonstrated a correlation with the ex vivo data (R2 = 0.75). The results of elemental analysis by inductively coupled plasma-mass spectrometry correlated strongly with the MRI data (R2 = 0.83) (n = 4). Due to its long retention time in the blood, biodegradability, and low toxicity to patients, ferumoxytol has great potential as a contrast agent for visualization PCa.
KW - Imaging
KW - Nanoparticle
KW - Cancer
KW - Iron oxide
KW - ICP-MS
KW - Magnetic resonance imaging
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550075
DO - https://doi.org/10.3390/cancers14122909
VL - 14
IS - 12
SP - 1
EP - 13
PB - MDPI
CY - Basel, Switzerland
AN - OPUS4-55007
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kader, A.
A1 - Kaufmann, Jan Ole
A1 - Mangarova, D. B.
A1 - Moeckel, J.
A1 - Adams, L. C.
A1 - Brangsch, J.
A1 - Heyl, J. L.
A1 - Zhao, J.
A1 - Verlemann, C.
A1 - Karst, U.
A1 - Collettini, F.
A1 - Auer, T. A.
A1 - Hamm, B.
A1 - Makowski, M. R.
T1 - Collagen-specific molecular magnetic resonance imaging of prostate cancer
N2 - Constant interactions between tumor cells and the extracellular matrix (ECM) influence the progression of prostate cancer (PCa). One of the key components of the ECM are collagen fibers, since they are responsible for the tissue stiffness, growth, adhesion, proliferation, migration, invasion/metastasis, cell signaling, and immune recruitment of tumor cells. To explore this molecular marker in the content of PCa, we investigated two different tumor volumes (500 mm3 and 1000 mm3) of a xenograft mouse model of PCa with molecular magnetic resonance imaging (MRI) using a collagen-specific probe. For in vivo MRI evaluation, T1-weighted sequences before and after probe administration were analyzed. No significant signal difference between the two tumor volumes could be found. However, we detected a significant difference between the signal intensity of the peripheral tumor area and the central area of the tumor, at both 500 mm3 (p < 0.01, n = 16) and at 1000 mm3 (p < 0.01, n = 16). The results of our histologic analyses confirmed the in vivo studies: There was no significant difference in the amount of collagen between the two tumor volumes (p > 0.05), but within the tumor, higher collagen expression was observed in the peripheral area compared with the central area of the tumor. Laser ablation with inductively coupled plasma mass spectrometry further confirmed these results. The 1000 mm3 tumors contained 2.8 +- 1.0% collagen and the 500 mm3 tumors contained 3.2 +- 1.2% (n = 16). There was a strong correlation between the in vivo MRI data and the ex vivo histological data (y = 0.068x + 1.1; R2 = 0.74) (n = 16). The results of elemental analysis by inductively coupled plasma mass spectrometry supported the MRI data (y = 3.82x + 0.56; R2 = 0.79; n = 7). MRI with the collagen-specific probe in PCa enables differentiation between different tumor areas. This may help to differentiate tumor from healthy tissue, potentially identifying tumor areas with a specific tumor biology.
KW - Molecular imaging
KW - Magnetic resonance imaging
KW - MRI
KW - Prostate cancer
KW - Collagen
KW - Laser ablation-inductively coupled plasma-mass spectroscopy
KW - EP-3533
KW - Peptide probe
KW - Gd-DOTA
KW - Contrast agent
KW - Tumor
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-568449
DO - https://doi.org/10.3390/ijms24010711
SN - 1422-0067
SN - 1661-6596
VL - 24
IS - 1
SP - 1
EP - 13
PB - MDPI
CY - Basel
AN - OPUS4-56844
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Völzke, Jule L.
A1 - Hodjat Shamami, Parya
A1 - Gawlitza, Kornelia
A1 - Feldmann, Ines
A1 - Zimathies, Annett
A1 - Meyer, Klas
A1 - Weller, Michael G.
T1 - High-purity corundum as support for affinity extractions from complex samples
N2 - Nonporous corundum powder, known as an abrasive material in the industry, was functionalized covalently with protein binders to isolate and enrich specific proteins from complex matrices. The materials based on corundum were characterized by TEM, ESEM, BET, DLS, EDS, and zeta potential measurements. The strong Al-O-P bonds between the corundum surface and amino phosphonic acids were used to introduce functional groups for further conjugations. The common crosslinker glutaraldehyde was compared with a hyperbranched polyglycerol (PG) of around 10 kDa. The latter was oxidized with periodate to generate aldehyde groups that can covalently react with the amines of the surface and the amino groups from the protein via a reductive amination process. The amount of bound protein was quantified via aromatic amino acid analysis (AAAA). This work shows that oxidized polyglycerol can be used as an alternative to glutaraldehyde. With polyglycerol, more of the model protein bovine serum albumin (BSA) could be attached to the surface under the same conditions, and lower non-specific binding (NSB) was observed. As a proof of concept, IgG was extracted with protein A from crude human plasma. The purity of the product was examined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). A binding capacity of 1.8 mg IgG per gram of corundum powder was achieved. The advantages of corundum include the very low price, extremely high physical and chemical stability, pressure resistance, favorable binding kinetics, convenient handling, and flexible application.
KW - Corundum
KW - Sapphire
KW - Affinity chromatography
KW - Antibodies
KW - Self-assembled monolayers (SAM)
KW - Polyglycerol
KW - Dendrimer
KW - Nonspecific binding (NSB)
KW - Purification
KW - Solid-phase extraction (SPE)
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-559342
DO - https://doi.org/10.3390/separations9090252
VL - 9
IS - 9
SP - 1
EP - 13
PB - MDPI
CY - Basel
AN - OPUS4-55934
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kazlagić, Anera
A1 - Russo, Francesco
A1 - Vogl, Jochen
A1 - Sturm, Patrick
A1 - Stephan, D.
A1 - Gluth, Gregor
ED - Resch-Genger, Ute
ED - Koch, Matthias
ED - Meermann, Björn
ED - Weller, Michael G.
T1 - Development of a sample preparation procedure for Sr isotope analysis of Portland cements
N2 - The 87Sr/86Sr isotope ratio can, in principle, be used for provenancing of cement. However, while commercial cements consist of multiple components, no detailed investigation into their individual 87Sr/86Sr isotope ratios or their influence on the integral 87Sr/86Sr isotope ratio of the resulting cement was conducted previously. Therefore, the present study aimed at determining and comparing the conventional 87Sr/86Sr isotope ratios of a diverse set of Portland cements and their corresponding Portland clinkers, the major component of these cements. Two approaches to remove the additives from the cements, i.e. to measure the conventional 87Sr/86Sr isotopic fingerprint of the clinker only, were tested, namely, treatment with a potassium hydroxide/sucrose solution and sieving on a 11-µm sieve. Dissolution in concentrated hydrochloric acid/nitric acid and in diluted nitric acid was employed to determine the 87Sr/86Sr isotope ratios of the cements and the individual clinkers. The aim was to find the most appropriate sample preparation procedure for cement provenancing, and the selection was realised by comparing the 87Sr/86Sr isotope ratios of differently treated cements with those of the corresponding clinkers. None of the methods to separate the clinkers from the cements proved to be satisfactory. However, it was found that the 87Sr/86Sr isotope ratios of clinker and cement generally corresponded, meaning that the latter can be used as a proxy for the clinker 87Sr/86Sr isotope ratio. Finally, the concentrated hydrochloric acid/nitric acid dissolution method was found to be the most suitable sample preparation method for the cements; it is thus recommended for 87Sr/86Sr isotope analyses for cement provenancing.
KW - Cement
KW - Provenancing
KW - Sr isotopes
KW - Portland clinker
KW - Dissolution
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-542239
DO - https://doi.org/10.1007/s00216-021-03821-7
SN - 1618-2642
SN - 1618-2650
VL - 414
IS - 15 (Topical collection: Analytical methods and applications in the materials and life sciences)
SP - 4379
EP - 4389
PB - Springer
CY - Berlin
AN - OPUS4-54223
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
A1 - Meermann, Björn
A1 - Koch, Matthias
A1 - Weller, Michael G.
T1 - Editorial: Analytical methods and applications in materials and life sciences
N2 - Current trends in materials and life sciences are flanked by the need to push detection limits to single molecules or single cells, enable the characterization of increasingly complex matrices or sophisticated nanostructures, speed up the time of analysis, reduce instrument complexity and costs, and improve the reliability of data. This requires suitable analytical tools such as spectroscopic, separation and imaging techniques, mass spectrometry, and hyphenated techniques as well as sensors and their adaptation to application-specific challenges in the environmental, food, consumer product, health sector, nanotechnology, and bioanalysis. Increasing concerns about health threatening known or emerging pollutants in drinking water, consumer products, and food and about the safety of nanomaterials led to a new awareness of the importance of analytical sciences. Another important driver in this direction is the increasing demand by legislation, particularly in view of the 17 sustainable development goals by the United Nations addressing clean energy, industry, and innovation, sustainable cities, clean water, and responsible consumption and production. In this respect, also the development of analytical methods that enable the characterization of material flows in production processes and support recycling concepts of precious raw materials becomes more and more relevant. In the future, this will provide the basis for greener production in the chemical industry utilizing recycled or sustainable starting materials.
This makes analytical chemistry an essential player in terms of the circular economy helping to increase the sustainability of production processes. In the life sciences sector, products based on proteins, such as therapeutic and diagnostic antibodies, increase in importance. These increasingly biotechnologically produced functional biomolecules pose a high level of complexity of matrix and structural features that can be met only by highly advanced methods for separation, characterization, and detection. In addition, metrological traceability and target definition are still significant challenges for the future, particularly in the life sciences.
However, innovative reference materials as required for the health and food sector and the characterization of advanced materials can only be developed when suitable analytical protocols are available. The so-called reproducibility crisis in sciences underlines the importance of improved measures of quality control for all kinds of measurements and material characterization. This calls for thorough method validation concepts, suitable reference materials, and regular interlaboratory comparisons of measurements as well as better training of scientists in analytical sciences.
The important contribution of analytical sciences to these developments is highlighted by a broad collection of research papers, trend articles, and critical reviews from these different application fields. Special emphasis is dedicated to often-overlooked quality assurance and reference materials.
T2 - 150 years BAM: Science with impact
CY - Berlin, Germany
DA - 01.01.2021
KW - Analysis
KW - Life sciences
KW - Analytical sciences
KW - Quality assurance
KW - Reference material
KW - Fluorescence
KW - Nanoparticle
KW - Sensor
KW - Material sciences
KW - Pollutant
KW - Environment
KW - Method
KW - Limit of detection
KW - 150th anniversary
KW - ABC
KW - BAM
KW - Collection
KW - Editorial
KW - Special issue
KW - Bundesanstalt für Materialforschung und -prüfung
KW - Jahrestag
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550720
DO - https://doi.org/10.1007/s00216-022-04082-8
SN - 1618-2642
SN - 1618-2650
VL - 414
IS - Topical collection: Analytical methods and applications in the materials and life sciences
SP - 4267
EP - 4268
PB - Springer
CY - Berlin
AN - OPUS4-55072
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bosc-Bierne, Gaby
A1 - Ewald, Shireen
A1 - Kreuzer, Oliver J.
A1 - Weller, Michael G.
T1 - Efficient Quality Control of Peptide Pools by UHPLC and Simultaneous UV and HRMS Detection
N2 - Peptide pools consist of short amino acid sequences and have proven to be versatile tools in various research areas in immunology and clinical applications. They are commercially available in many different compositions and variants. However, unlike other reagents that consist of only one or a few compounds, peptide pools are highly complex products which makes their quality control a major challenge. Quantitative peptide analysis usually requires sophisticated methods, in most cases isotope-labeled standards and reference materials. Usually, this would be prohibitively laborious and expensive. Therefore, an approach is needed to provide a practical and feasible method for quality control of peptide pools. With insufficient quality control, the use of such products could lead to incorrect experimental results, worsening the well-known reproducibility crisis in the biomedical sciences. Here we propose the use of ultra-high performance liquid chromatography (UHPLC) with two detectors, a standard UV detector at 214 nm for quantitative analysis and a high-resolution mass spectrometer (HRMS) for identity confirmation. To be cost-efficient and fast, quantification and identification are performed in one chromatographic run. An optimized protocol is shown, and different peak integration methods are compared and discussed. This work was performed using a peptide pool known as CEF advanced, which consists of 32 peptides derived from cytomegalovirus (CMV), Epstein–Barr virus (EBV) and influenza virus, ranging from 8 to 12 amino acids in length.
N2 - Peptidpools bestehen aus kurzen Aminosäuresequenzen und haben sich als vielseitige Werkzeuge in verschiedenen Forschungsbereichen der Immunologie und bei klinischen Anwendungen erwiesen. Sie sind in vielen verschiedenen Zusammensetzungen und Varianten im Handel erhältlich. Im Gegensatz zu anderen Reagenzien, die nur aus einer oder wenigen Verbindungen bestehen, sind Peptidpools jedoch hochkomplexe Produkte, was ihre Qualitätskontrolle zu einer großen Herausforderung macht. Die quantitative Peptidanalyse erfordert in der Regel ausgefeilte Methoden, in den meisten Fällen isotopenmarkierte Standards und Referenzmaterialien. Dies ist in der Regel sehr aufwändig und teuer. Daher wird ein Ansatz benötigt, der eine praktische und praktikable Methode zur Qualitätskontrolle von Peptidpools bietet. Bei unzureichender Qualitätskontrolle könnte die Verwendung solcher Produkte zu falschen Versuchsergebnissen führen, was das bekannte Problem der Reproduzierbarkeit in den biomedizinischen Wissenschaften noch verschärfen würde. Hier schlagen wir die Verwendung der Ultrahochleistungs-Flüssigkeitschromatographie (UHPLC) mit zwei Detektoren vor, einem Standard-UV-Detektor bei 214 nm für die quantitative Analyse und einem hochauflösenden Massenspektrometer (HRMS) für die Identitätsbestätigung. Um kosteneffizient und schnell zu sein, werden Quantifizierung und Identifizierung in einem einzigen chromatographischen Lauf durchgeführt. Es wird ein optimiertes Protokoll gezeigt, und es werden verschiedene Peak-Integrationsmethoden verglichen und diskutiert. Für diese Arbeit wurde ein Peptidpool verwendet, der als CEF advanced bekannt ist und aus 32 Peptiden besteht, die vom Cytomegalovirus (CMV), Epstein-Barr-Virus (EBV) und Influenzavirus stammen und zwischen 8 und 12 Aminosäuren lang sind.
KW - Synthetic peptides
KW - Quality control
KW - Impurites
KW - Byproducts
KW - Degradation
KW - Mass spectrometry
KW - Orbitrap
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-602299
DO - https://doi.org/10.3390/separations11050156
SN - 2297-8739
VL - 11
IS - 5
SP - 1
EP - 18
PB - MDPI
CY - Basel
AN - OPUS4-60229
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tannenberg, Robert
A1 - Paul, Martin
A1 - Röder, Bettina
A1 - Gande, S. L.
A1 - Sreeramulu, S.
A1 - Saxena, K.
A1 - Richter, C.
A1 - Schwalbe, H.
A1 - Swart, C.
A1 - Weller, Michael G.
T1 - Chemiluminescence biosensor for the determination of cardiac troponin I (cTnI)
N2 - Cardiac troponin I (cTnI) is a crucial biomarker for diagnosing cardiac vascular diseases, including acute myocardial infarction (AMI). This study presents a proof-of-concept chemiluminescence-based immunosensor for rapid and accurate measurement of cTnI, with the potential for online monitoring. The immunosensor incorporates a flow cell design and a sensitive complementary metal-oxide-semiconductor (CMOS) camera for optical readout. A microfluidic setup was established to enable selective and quasi-online determination of cTnI within ten minutes. The sensor was tested with recombinant cTnI in phosphate buffer, demonstrating measurements in the concentration range of 2–25 µg/L, with a limit of detection (LoD) of 0.6 µg/L (23 pmol/L) achieved using the optimized system. The immunosensor exhibited high selectivity, as no cross-reactivity was observed with other recombinant proteins such as cTnT and cTnC at a concentration of 16 µg/L. Measurements with diluted blood plasma and serum yielded an LoD of 60 µg/L (2.4 nmol/L) and 70 µg/L (2.9 nmol/L), respectively. This biosensor offers a promising approach for the rapid and sensitive detection of cTnI, contributing to the diagnosis and management of acute myocardial infarction and other cardiac vascular diseases.
N2 - Das kardiale Troponin I (cTnI) ist ein wichtiger Biomarker für die Diagnose von Herz-Kreislauf-Erkrankungen, einschließlich des akuten Myokardinfarkts (AMI). In dieser Studie wird ein auf Chemilumineszenz basierender Immunsensor für die schnelle und genaue Messung von cTnI vorgestellt, der das Potenzial für eine Online-Überwachung hat. Der Immunsensor besteht aus einer Durchflusszelle und einer empfindlichen CMOS-Kamera (Complementary Metal-Oxide-Semiconductor) zur optischen Detektion. Es wurde ein mikrofluidischer Aufbau entwickelt, der eine selektive und quasi Online-Bestimmung von cTnI innerhalb von zehn Minuten ermöglicht. Der Sensor wurde mit rekombinantem cTnI in Phosphatpuffer getestet und zeigte einen Messbereich von 2-25 µg/L, wobei mit dem optimierten System eine Nachweisgrenze (LoD) von 0,6 µg/L (23 pmol/L) erreicht wurde. Der Immunsensor zeigte eine hohe Selektivität, da keine Kreuzreaktivität mit anderen rekombinanten Proteinen wie cTnT und cTnC bei einer Konzentration von 16 µg/L beobachtet wurde. Messungen mit verdünntem Blutplasma und Serum ergaben einen LoD von 60 µg/L (2,4 nmol/L) bzw. 70 µg/L (2,9 nmol/L). Dieser Biosensor bietet einen vielversprechenden Ansatz für den schnellen und empfindlichen Nachweis von cTnI, der zur Diagnose und Behandlung des akuten Myokardinfarkts und anderer kardialer Gefäßerkrankungen beitragen kann.
KW - Acute myocardial infarction
KW - Heart attack
KW - Emergency
KW - Diagnosis
KW - Cardiac troponin
KW - Biomarker
KW - Immunosensor
KW - Biosensor
KW - Chemiluminescence
KW - Luminol
KW - Peroxidase
KW - Monoclonal antibodies
KW - Flow injection immunoassay
KW - Immunometric assay
KW - Immunometric biosensor
KW - Microfluidic system
KW - Monolithic column
KW - Online biosensor
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575471
DO - https://doi.org/10.3390/bios13040455
SN - 2079-6374
VL - 13
IS - 4
SP - 1
EP - 20
PB - MDPI
CY - Basel
AN - OPUS4-57547
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kader, A.
A1 - Brangsch, J.
A1 - Kaufmann, Jan Ole
A1 - Zhao, J.
A1 - Mangarova, D. B.
A1 - Moeckel, J.
A1 - Adams, L. C.
A1 - Sack, I.
A1 - Taupitz, M.
A1 - Hamm, B.
A1 - Makowski, M. R.
T1 - Molecular MR Imaging of Prostate Cancer
N2 - This review summarizes recent developments regarding molecular imaging markers for magnetic resonance imaging (MRI) of prostate cancer (PCa). Currently, the clinical standard includes MR imaging using unspecific gadolinium-based contrast agents. Specific molecular probes for the diagnosis of PCa could improve the molecular characterization of the tumor in a non-invasive examination. Furthermore, molecular probes could enable targeted therapies to suppress tumor growth or reduce the tumor size.
KW - Prostate cancer
KW - Magnetic resonance imaging
KW - Molecular imaging
KW - Imaging
KW - Molecular marker
KW - Screening
KW - MRI
KW - Diagnosis
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-519503
DO - https://doi.org/10.3390/biomedicines9010001
VL - 9
IS - 1
SP - 1
EP - 17
PB - MDPI
CY - Basel
AN - OPUS4-51950
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Völzke, Jule L.
A1 - Smatty, Sarah
A1 - Döring, Sarah
A1 - Ewald, Shireen
A1 - Oelze, Marcus
A1 - Fratzke, Franziska
A1 - Flemig, Sabine
A1 - Konthur, Zoltán
A1 - Weller, Michael G.
T1 - Efficient Purification of Polyhistidine-Tagged Recombinant Proteins Using Functionalized Corundum Particles
N2 - Immobilized metal affinity chromatography (IMAC) is a widely used technique for purifying polyhistidine-tagged recombinant proteins. However, it often has practical limitations that require complex optimizations and additional steps for purification. In this study, we introduce functionalized corundum particles as a novel, efficient, and economical method for purifying recombinant proteins in a column-free format. The corundum surface is modified with amino silane APTES, followed by EDTA dianhydride, and then loaded with nickel ions. We used the Kaiser test to monitor the modification process and ICP-MS to quantify the metal-binding capacity. To evaluate the system, we used His-tagged protein A/G (PAG) mixed with bovine serum albumin (BSA). The corundum particles exhibited a binding capacity of approximately 3 mg of protein per gram of corundum or 2.4 mg per 1 mL of corundum suspension. We also examined cytoplasm obtained from different E. coli strains as an example of a complex matrix. Varying the imidazole concentration in the loading and washing buffers showed that higher concentrations during loading improved purity. Even with sample volumes as large as one liter, we successfully isolated recombinant proteins down to a concentration of 1 µg/mL. We found higher purity levels with corundum when comparing the corundum material to standard Ni–NTA agarose beads. We successfully purified His6-MBP-mSA2, a fusion protein comprising monomeric streptavidin and maltose-binding protein, from E. coli cytoplasm, demonstrating the method's applicability. We also purified SARS-CoV-2-S-RBD-His8 expressed in human Expi293F cells, confirming its suitability for mammalian cell culture supernatants. The material cost of the nickel-loaded corundum material (without regeneration) is estimated to be less than 30 cents per gram of functionalized support or 10 cents per milligram of isolated protein. Another advantage of this system is the exceptional physical and chemical stability of corundum particles. Overall, we have demonstrated that this novel material offers an efficient, robust, and cost-effective purification platform for His-tagged proteins, even in challenging, complex matrices and large sample volumes with low product concentrations. This method has potential applications in both small laboratories and large-scale industrial settings.
N2 - Die immobilisierte Metallaffinitätschromatographie (IMAC) ist eine weit verbreitete Technik zur Reinigung von rekombinanten Proteinen mit Polyhistidin-Markierung. Sie hat jedoch oft praktische Einschränkungen, die komplexe Optimierungen und zusätzliche Schritte für die Aufreinigung erfordern. In dieser Studie stellen wir funktionalisierte Korundpartikel als neuartige, effiziente und wirtschaftliche Methode zur Reinigung rekombinanter Proteine in einem säulenfreien Format vor. Die Korundoberfläche wird mit dem Aminosilan APTES und anschließend mit EDTA-Dianhydrid modifiziert und dann mit Nickelionen beladen. Wir haben den Kaiser-Test zur Überwachung des Modifizierungsprozesses und ICP-MS zur Quantifizierung der Metallbindungskapazität verwendet. Zur Charakterisierung des Systems verwendeten wir His-markiertes Protein A/G (PAG) in Kombination mit Rinderserumalbumin (BSA). Die Korundpartikel wiesen eine Bindungskapazität von etwa 3 mg Protein pro Gramm Korund oder 2,4 mg pro 1 ml Korundsuspension auf. Als Beispiel für eine komplexe Matrix untersuchten wir auch Zytoplasma, das aus verschiedenen E. coli-Stämmen gewonnen wurde. Die Variation der Imidazolkonzentration in den Lade- und Waschpuffern zeigte, dass höhere Konzentrationen beim Laden die Reinheit verbesserten. Selbst bei einem Probenvolumen von bis zu einem Liter konnten wir rekombinante Proteine von 1 µg/mL isolieren. Beim Vergleich des Korundmaterials mit Standard-Ni-NTA-Agarose-Beads stellten wir einen höheren Reinheitsgrad mit Korund fest. Wir reinigten erfolgreich His6-MBP-mSA2 aus E. coli-Zytoplasma, ein Fusionsprotein, das aus monomerem Streptavidin und Maltose-bindendem Protein besteht. Wir reinigten auch SARS-CoV-2-S-RBD-His8, das in humanen Expi293F-Zellen exprimiert wurde, und bestätigten damit die Eignung des Materials für Zellkulturüberstände von Säugetieren. Die Materialkosten für nickelbeladenen Korund (ohne Regenerierung) werden auf weniger als 30 Cent pro Gramm funktionalisierten Trägers oder 10 Cent pro Milligramm isolierten Proteins geschätzt. Ein weiterer Vorteil dieses Systems ist die außergewöhnliche physikalische und chemische Stabilität der Korundpartikel. Insgesamt haben wir gezeigt, dass dieses neuartige Material eine effiziente, robuste und kostengünstige Reinigungsplattform für His-markierte Proteine bietet, selbst bei schwierigen, komplexen Matrices und großen Probenmengen mit niedrigen Produktkonzentrationen. Diese Methode könnte sowohl in kleinen Labors als auch in der Großindustrie eingesetzt werden.
KW - Aluminum oxide
KW - Sapphire
KW - Ethylenediaminetetraacetic acid
KW - Nickel chelate
KW - EDTAD
KW - HexaHis-Tag
KW - His6
KW - 6xHis
KW - His8
KW - Bioseparation
KW - IMAC purification
KW - Immunocapture
KW - Affinity chromatography
KW - Carrier
KW - Nickel
KW - Recombinant protein
KW - Escherichia coli
KW - Bacterial lysates
KW - Cytoplasm
KW - Polishing
KW - Downstream processing
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575672
DO - https://doi.org/10.3390/biotech12020031
VL - 12
IS - 2
SP - 1
EP - 18
PB - MDPI
CY - Basel, Schweiz
AN - OPUS4-57567
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Paul, Martin
A1 - Weller, Michael G.
T1 - Antibody screening by microarray technology - Direct identification of selective high-affinity clones
N2 - The primary screening of hybridoma cells is a time-critical and laborious step during the development of monoclonal antibodies. Often, critical errors occur in this phase, which supports the notion that the generation of monoclonal antibodies with hybridoma technology is difficult to control and hence, a risky venture. We think that it is crucial to improve the screening process to eliminate most of the critical deficits of the conventional approach. With this new microarray-based procedure, several advances could be achieved: Selectivity for excellent binders, high-throughput, reproducible signals, avoidance of misleading avidity (multivalency) effects, and performance of simultaneous competition experiments. The latter can also be used to select clones of desired cross-reactivity properties. In this paper, a model system with two excellent clones against carbamazepine, two weak clones, and blank supernatant containing fetal bovine serum was designed to examine the effectiveness of the new system. The excellent clones could be detected largely independent of the immunoglobulin G (IgG) concentration, which is usually unknown during the clone screening since the determination and subsequent adjustment of the antibody concentration are not feasible in most cases. Furthermore, in this approach, the enrichment, isolation, and purification of IgG for characterization is not necessary. Raw cell culture supernatant can be used directly, even when fetal calf serum (FCS) or other complex media is used. In addition, an improved method for the oriented antibody-immobilization on epoxy-silanized slides is presented. Based on the results of this model system with simulated hybridoma supernatants, we conclude that this approach should be preferable to most other protocols leading to many false positives, causing expensive and lengthy elimination steps to weed out the poor clones.
KW - ELISA
KW - Immunoassay
KW - Microarray
KW - Lab-on-a-chip
KW - Miniaturization
KW - Aautomatisation
KW - HTS
KW - High-throughput
KW - Screening
KW - Fluorescence
KW - Label
KW - Hybridoma
KW - Inhibition
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-503361
DO - https://doi.org/10.3390/antib9010001
SN - 2073-4468
VL - 9
IS - 1
SP - 1
EP - 16
PB - MDPI
CY - Basel
AN - OPUS4-50336
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Döring, Sarah
A1 - Tscheuschner, Georg
A1 - Flemig, Sabine
A1 - Weller, Michael G.
A1 - Konthur, Zoltán
T1 - Cost-Effective Method for Full-Length Sequencing of Monoclonal Antibodies from Hybridoma Cells
N2 - Background: Monoclonal antibodies play an important role in therapeutic and analytical applications. For recombinant expression, the coding sequences of the variable regions of the heavy and light chains are required. In addition, cloning antibody sequences, including constant regions, reduces the impact of hybridoma cell loss and ensures preservation of the naturally occurring full antibody sequence. Method: We combined amplification of IgG antibody variable regions from hybridoma mRNA with an advanced method for fulllength cloning of monoclonal antibodies in a simple two-step workflow. Following Sanger sequencing and evaluation of consensus sequences, the best matching variable, diversity,
and joining (V-(D-)J) gene segments were identified according to identity scores from IgBLAST reference sequences. Simultaneously, the mouse IgG subclass was determined at the DNA level based on isotype-specific sequence patterns in the CH1 domain. Knowing the DNA sequence of V-(D-)J recombination responsible for the complementary determining region 3 (CDR 3), variable region-specific primers were designed and used to amplify the corresponding antibody constant regions. Results: To verify the approach, we applied it to the hybridoma clone BAM-CCMV-29-81 and obtained identical full-length antibody
sequences as with RNA Illumina sequencing. Further validation at the protein level using an established MALDI-TOF MS-fingerprinting protocol showed that five out of six genetically encoded CDR domains of the monoclonal antibody BAM-CCMV-29-81 could be efficiently correlated. Conclusion: This simple, streamlined method enables the cost-effective determination of the full-length sequence of monoclonal antibodies from hybridoma cell lines, with the added benefit of obtaining the DNA sequence of the antibody ready for recombinant expression.
KW - Full-length antibody sequencing
KW - Hybridoma cell loss
KW - MALDI-TOF MS
KW - Immunoglobulin isotyping
KW - RNA Illumina sequencing
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-639599
DO - https://doi.org/10.3390/antib14030072
SN - 2073-4468
VL - 14
IS - 3
SP - 1
EP - 17
PB - MDPI
CY - Basel
AN - OPUS4-63959
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kaufmann, Jan Ole
A1 - Brangsch, J.
A1 - Kader, A.
A1 - Saatz, Jessica
A1 - Mangarova, D. B.
A1 - Zacharias, M.
A1 - Kempf, W. E.
A1 - Schwaar, T.
A1 - Ponader, Marco
A1 - Adams, L. C.
A1 - Möckel, J.
A1 - Botnar, R. M.
A1 - Taupitz, M.
A1 - Mägdefessel, L.
A1 - Traub, Heike
A1 - Hamm, B.
A1 - Weller, Michael G.
A1 - Makowski, M. R.
T1 - ADAMTS4-specific MR-probe to assess aortic aneurysms in vivo using synthetic peptide libraries
N2 - The incidence of abdominal aortic aneurysms (AAAs) has substantially increased during the last 20 years and their rupture remains the third most common cause of sudden death in the cardiovascular field after myocardial infarction and stroke. The only established clinical parameter to assess AAAs is based on the aneurysm size. Novel biomarkers are needed to improve the assessment of the risk of rupture. ADAMTS4 (A Disintegrin And Metalloproteinase with ThromboSpondin motifs 4) is a strongly upregulated proteoglycan cleaving enzyme in the unstable course of AAAs. In the screening of a one-bead-one-compound library against ADAMTS4, a low-molecular-weight cyclic peptide is discovered with favorable properties for in vivo molecular magnetic resonance imaging applications. After identification and characterization, it’s potential is evaluated in an AAA mouse model. The ADAMTS4-specific probe enables the in vivo imaging-based prediction of aneurysm expansion and rupture.
KW - Peptide
KW - Peptide library
KW - OBOC library
KW - Combinatorial chemistry
KW - Peptide aptamers
KW - Binding molecule
KW - Affinity
KW - Synthetic peptides
KW - Contrast agent
KW - Magnetic resonance imaging
KW - One-bead-one-compound library
KW - On-chip screening
KW - Lab-on-a-chip
KW - MALDI-TOF MS
KW - SPR
KW - Surface plasmon resonance
KW - Alanine scan
KW - Fluorescence label
KW - MST
KW - Docking
KW - Chelate
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-560930
DO - https://doi.org/10.1038/s41467-022-30464-8
N1 - Geburtsname von Ponader, Marco: Wilke, M. - Birth name of Ponader, Marco: Wilke, M.
VL - 13
IS - 1
SP - 1
EP - 18
PB - Springer Nature Limited
CY - Heidelberg
AN - OPUS4-56093
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - GEN
A1 - Döring, Sarah
T1 - Corundum Particles as Trypsin Carrier for Efficient Protein Digestion
N2 - This dataset contains raw LC–MS/MS files of trypsin-digested NISTmAb acquired on a SCIEX TripleTOF 6600 mass spectrometer in DIA (SWATH) mode for antibody quantification. In addition, it includes MALDI-TOF MS peptide mass fingerprints of trypsin-digested Herceptin as well as reference spectra that can be used for antibody identification using the open-source software ABID 2.0 (https://bam.de/ABID).
The data were generated within a study demonstrating the applicability of corundum-immobilized trypsin for antibody digestion and its suitability for peptide-based LC–MS/MS quantification and MALDI-TOF MS fingerprinting–based antibody identification.
KW - NISTmAb
KW - Herceptin
KW - MALDI-TOF MS peptide mass fingerprint
KW - ABID 2.0
PY - 2025
DO - https://doi.org/10.5281/zenodo.17416536
PB - Zenodo
CY - Geneva
AN - OPUS4-65365
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Adams, L. C.
A1 - Brangsch, J.
A1 - Kaufmann, Jan Ole
A1 - Mangarova, D. B.
A1 - Moeckel, J.
A1 - Kader, A.
A1 - Buchholz, R.
A1 - Karst, U.
A1 - Botnar, R. M.
A1 - Hamm, B.
A1 - Makowski, M. R.
A1 - Keller, S.
T1 - Effect of Doxycycline on Survival in Abdominal Aortic Aneurysms in a Mouse Model
N2 - Background. Currently, there is no reliable nonsurgical treatment for abdominal aortic aneurysm (AAA). This study, therefore, investigates if doxycycline reduces AAA growth and the number of rupture-related deaths in a murine ApoE−/− model of AAA and whether gadofosveset trisodium-based MRI differs between animals with and without doxycycline treatment. Methods. Nine ApoE−/− mice were implanted with osmotic minipumps continuously releasing angiotensin II and treated with doxycycline (30 mg/kg/d) in parallel. After four weeks, MRI was performed at 3T with a clinical dose of the albumin-binding probe gadofosveset (0.03 mmol/kg). Results were compared with previously published wild-type control animals and with previously studied ApoE−/− animals without doxycycline treatment. Differences in mortality were also investigated between these groups. Results. In a previous study, we found that approximately 25% of angiotensin II-infused ApoE−/− mice died, whereas in the present study, only one out of 9 angiotensin II-infused and doxycycline-treated ApoE−/− mice (11.1%) died within 4 weeks. Furthermore, doxycycline-treated ApoE−/− mice showed significantly lower contrast-to-noise (CNR) values in MRI compared to ApoE−/− mice without doxycycline treatment. In vivo measurements of relative signal enhancement (CNR) correlated significantly with ex vivo measurements of albumin staining (R2 = 0.58). In addition, a strong visual colocalization of albumin-positive areas in the fluorescence albumin staining with gadolinium distribution in LA-ICP-MS was shown. However, no significant difference in aneurysm size was observed after doxycycline treatment. Conclusion. The present experimental in vivo study suggests that doxycycline treatment may reduce rupture-related deaths in AAA by slowing endothelial damage without reversing aneurysm growth.
KW - Ggadolinium
KW - MRI
KW - Magnetic resonance imaging
KW - Osmotic minipumps
KW - Tetracyclin
KW - Antibiotics
KW - Angiotensin II
KW - LA-ICP-MS
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527015
DO - https://doi.org/10.1155/2021/9999847
SP - 9999847
PB - Hindawi
CY - London
AN - OPUS4-52701
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tuma, Dirk
A1 - Mady, A. H.
A1 - Baynosa, M. L.
A1 - Saad, M.
A1 - Dhakal, G.
A1 - Kim, W. K.
A1 - Shim, Jae-Jin
T1 - Morphology-engineered hollow NiTiO₃/C–Ag/Ag₃PO₄ S-scheme heterojunction photocatalyst: mechanistic insights into sunlight-driven tetracycline degradation
N2 - Tetracycline (TCH), a widely used antibiotic, persists in aquatic and terrestrial environments, posing ecological risks and accelerating antibiotic resistance. To address this, we report a hollow-structured NiTiO₃/C–Ag/Ag₃PO₄ (NT/C–AAP)
photocatalyst—the first hollow-type nickel titanate—synthesized via a self-template solvothermal route followed by photodeposition. The catalyst integrates key design strategies—hollow architecture, oxygen vacancies, carbon coating, and an S-scheme heterojunction—to optimize photocatalytic performance. The hollow structure enhances light harvesting via internal scattering, oxygen vacancies facilitate O2 adsorption and superoxide (O₂•⁻) generation, and the S-scheme heterojunction effectively suppresses electron–hole recombination while preserving strong redox potential. NT/C–AAP achieved 96% TCH degradation within 1 h and 82% mineralization in 3 h under solar light, far exceeding core–shell (18%) and aggregated (47%) NiTiO₃-based catalysts. Complete removal was realized within 40 min under 400 W visible light. The catalyst maintained 96% activity after five cycles, confirming excellent durability. Compared with previously reported NiTiO₃ photocatalysts, NT/C–AAP delivered a 50–400% performance enhancement arising from its engineered hollow structure and improved electronic properties. Mechanistic studies identified O₂•⁻ and •OH radicals as dominant species, validating the role of morphology and interface engineering in directing charge separation and redox activity. Additionally, a catalyst performance index was proposed to facilitate comparison across diverse conditions. Overall, this work introduces a novel, durable photocatalyst that links structural design to functional performance and demonstrates strong potential for practical environmental remediation.
KW - Heterojunction photocatalyst
KW - Photodegradation
KW - Tetracycline
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655946
DO - https://doi.org/10.1007/s42114-025-01600-x
SN - 2522-0128
VL - 9
IS - 2
SP - 1
EP - 19
PB - Springer Nature
CY - London
AN - OPUS4-65594
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Filimonova, S. M.
A1 - Melnikov, E. S.
A1 - Kaufmann, Jan Ole
A1 - Shchepochkina, O. Y.
A1 - Eremin, S. A.
A1 - Gravel, I. V.
A1 - Raysyan, Anna
T1 - Exploring the anti‐α‐amylase activity of flavonoid aglycones in fabaceae plant extracts: a combined MALDI‐TOF‐MS and LC–MS/MS approach
N2 - A combination of TLC-bioautography, MALDI-TOF-MS and LC–MS/MS methods was used to identify flavonoids with anti-α-amylase activity in extracts of Lathyrus pratensis L. (herb), L. polyphillus L. (fruits), Thermopsis lanceolata R. Br. (herb) and S. japonica L. (buds). After the TLC-autobiography assay, substances with anti-amylase activity were identified by MALDI-TOF-MS followed by confirmation of the result by LC–MS/MS. Results of the study revealed that the flavonoids apigenin, luteolin, formononetin, genistein and kaempferol display marked anti-α-amylase activity. Formononetin showed the largest activity. Compared with LC–MS/MS, MALDI-TOF-MS is a quick and convenient method; results can be obtained within minutes; and only minor sample amounts are required which allows us to analyse mixtures of substances without preliminary separation. However, the inability to distinguish between isomers is the main limitation of the method.
KW - Enzyme
KW - MALDI-TOF-MS
KW - LC-MS/MS
KW - Massenspektrometrie
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-577128
DO - https://doi.org/https://doi.org/10.1111/ijfs.16491
SN - 0950-5423
VL - 58
IS - 7
SP - 3902
EP - 3911
PB - Wiley & Sons
CY - Hoboken, NJ, USA
AN - OPUS4-57712
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weller, Michael G.
T1 - The mystery of homochirality on earth
N2 - Homochirality is an obvious feature of life on Earth. On the other hand, extraterrestrial samples contain largely racemic compounds. The same is true for any common organic synthesis. Therefore, it has been a perplexing puzzle for decades how these racemates could have formed enantiomerically enriched fractions as a basis for the origin of homochiral life forms. Numerous hypotheses have been put forward as to how preferentially homochiral molecules could have formed and accumulated on Earth. In this article, it is shown that homochirality of the abiotic organic pool at the time of formation of the first self-replicating molecules is not necessary and not even probable. It is proposed to abandon the notion of a molecular ensemble and to focus on the level of individual molecules. Although the formation of the first self-replicating, most likely homochiral molecule, is a seemingly improbable event, on a closer look, it is almost inevitable that some homochiral molecules have formed simply on a statistical basis. In this case, the non-selective leap to homochirality would be one of the first steps in chemical evolution directly out of a racemic “ocean”. Moreover, most studies focus on the chirality of the primordial monomers with respect to an asymmetric carbon atom. However, any polymer with a minimal size that allows folding to a secondary structure would spontaneously lead to asymmetric higher structures (conformations). Most of the functions of these polymers would be influenced by this inherently asymmetric folding. Furthermore, a concept of physical compartmentalization based on rock nanopores in analogy to nanocavities of digital immunoassays is introduced to suggest that complex cell walls or membranes were also not required for the first steps of chemical evolution. To summarize, simple and universal mechanisms may have led to homochiral self-replicating systems in the context of chemical evolution. A homochiral monomer pool is deemed unnecessary and probably never existed on primordial Earth.
N2 - Homochiralität ist ein offensichtliches Merkmal des Lebens auf der Erde. Andererseits enthalten extraterrestrische Proben überwiegend racemische Verbindungen. Dasselbe gilt für jede gängige organische Synthese. Daher war es jahrzehntelang ein Rätsel, wie diese Racemate enantiomeren-angereicherte Fraktionen als Grundlage für den Ursprung homochiraler Lebensformen bilden konnten. Zahlreiche Hypothesen wurden aufgestellt, wie sich bevorzugt homochirale Moleküle auf der Erde gebildet und angereichert haben könnten. In diesem Artikel wird gezeigt, dass Homochiralität des abiotischen organischen Pools zum Zeitpunkt der Bildung der ersten selbstreplizierenden Moleküle nicht notwendig und nicht einmal wahrscheinlich ist. Es wird vorgeschlagen, die Vorstellung eines molekularen Ensembles aufzugeben und sich auf die Ebene der einzelnen Moleküle zu konzentrieren. Obwohl die Bildung des ersten selbstreplizierenden, höchstwahrscheinlich homochiralen Moleküls ein scheinbar unwahrscheinliches Ereignis ist, ist es bei näherer Betrachtung fast unvermeidlich, dass sich einige homochirale Moleküle einfach auf statistischer Basis gebildet haben. In diesem Fall wäre der nichtselektive Sprung zur Homochiralität einer der ersten Schritte der chemischen Evolution direkt aus einem racemischen "Ozean". Darüber hinaus konzentrieren sich die meisten Studien auf die Chiralität der ursprünglichen Monomere in Bezug auf ein asymmetrisches Kohlenstoffatom. Jedes Polymer mit einer Mindestgröße, die eine Faltung zu einer Sekundärstruktur erlaubt, würde jedoch spontan zu asymmetrischen höheren Strukturen (Konformationen) führen. Die meisten Funktionen dieser Polymere würden durch diese inhärent asymmetrische Faltung beeinflusst. Darüber hinaus wird ein Konzept der physikalischen Kompartimentierung auf der Basis von Gesteinsnanoporen in Analogie zu den Nanokavitäten digitaler Immunoassays vorgestellt, das darauf hindeutet, dass auch für die ersten Schritte der chemischen Evolution keine komplexen Zellwände oder Membranen notwendig waren. Zusammenfassend lässt sich sagen, dass einfache und universelle Mechanismen zu homochiralen selbstreplizierenden Systemen im Rahmen der chemischen Evolution geführt haben könnten. Ein homochiraler Monomerpool wird als unnötig angesehen, welcher auf der Urerde wahrscheinlich nie existiert hat.
KW - Chemical evolution
KW - Enantiomeric excess ee
KW - Chirality
KW - Racemate
KW - Folding chirality
KW - Self-assembly
KW - self-replication
KW - Single molecule
KW - Prebiotic chemistry
KW - Protein folding
KW - Peptide folding
KW - Proteinoid
KW - Conformation
KW - Segregation
KW - Compartmentalization
KW - Digital immunoassay
KW - Porous rock
KW - Miller and Urey
KW - Primordial soup
KW - Murchison meteorite
KW - Micrometeorites
KW - Tholins
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-598349
DO - https://doi.org/10.3390/life14030341
SN - 2075-1729
VL - 14
IS - 3
SP - 1
EP - 13
PB - MDPI
CY - Basel
AN - OPUS4-59834
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Reinmuth-Selzle, K.
A1 - Tchipilov, Teodor
A1 - Backes, A. T.
A1 - Tscheuschner, Georg
A1 - Tang, K.
A1 - Ziegler, K.
A1 - Lucas, K.
A1 - Pöschl, U.
A1 - Fröhlich-Nowoisky, J.
A1 - Weller, Michael G.
T1 - Determination of the protein content of complex samples by aromatic amino acid analysis, liquid chromatography-UV absorbance, and colorimetry
N2 - Fast and accurate determination of the protein content of a sample is an important and non-trivial task of many biochemical, biomedical, food chemical, pharmaceutical, and environmental research activities. Different methods of total protein determination are used for a wide range of proteins with highly variable properties in complex matrices. These methods usually work reasonably well for proteins under controlled conditions, but the results for non-standard and complex samples are often questionable. Here, we compare new and well-established methods, including traditional amino acid analysis (AAA), aromatic amino acid analysis (AAAA) based on the amino acids phenylalanine and tyrosine, reversed-phase liquid chromatography of intact proteins with UV absorbance measurements at 220 and 280 nm (LC-220, LC-280), and colorimetric assays like Coomassie Blue G-250 dye-binding assay (Bradford) and bicinchoninic acid (BCA) assay. We investigated different samples, including proteins with challenging properties, chemical modifications, mixtures, and complex matrices like air particulate matter and pollen extracts. All methods yielded accurate and precise results for the protein and matrix used for calibration. AAA, AAAA with fluorescence detection, and the LC-220 method yielded robust results even under more challenging conditions (variable analytes and matrices). These methods turned out to be well-suited for reliable determination of the protein content in a wide range of samples, such as air particulate matter and pollen.
KW - Air particulate matter
KW - Aromatic amino acid analysis
KW - Atmospheric aerosol
KW - Chemical protein modification
KW - Derivatization
KW - Nitration
KW - Nitrotyrosine
KW - LC-UV absorbance
KW - Pollen extract
KW - Protein quantification
KW - Protein test
KW - Kjeldahl
KW - Tyrosine
KW - Phenylalanine
KW - Hydrolysis
KW - Bradford
KW - BCA test
KW - 280 nm
KW - Air filter samples
KW - Fluorescence
KW - HPLC
KW - Chromatography
KW - Protein content
KW - 150th anniversary of BAM
KW - Topical collection: Analytical Methods and Applications in the Materials and Life Sciences
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-545924
UR - https://pubmed.ncbi.nlm.nih.gov/35320366/
DO - https://doi.org/10.1007/s00216-022-03910-1
SP - 1
EP - 14
PB - Springer Nature Limited
CY - New York, Heidelberg
AN - OPUS4-54592
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Keller, S.
A1 - Borde, T.
A1 - Brangsch, J.
A1 - Reimann, C.
A1 - Kader, A.
A1 - Schulze, D.
A1 - Buchholz, R.
A1 - Kaufmann, Jan Ole
A1 - Karst, U.
A1 - Schellenberger, E.
A1 - Hamm, B.
A1 - Makowski, M. R.
T1 - Assessment of the hepatic tumor extracellular matrix using elastin‑specific molecular magnetic resonance imaging in an experimental rabbit cancer model
N2 - To investigate the imaging performance of an elastin-specific molecular magnetic resonance imaging (MRI) probe with respect to the extracellular matrix (ECM) in an experimental hepatic cancer model. Twelve rabbits with hepatic VX2 tumors were examined using 3 T MRI 14, 21, and 28 days after tumor implantation for two subsequent days (gadobutrol, day 1; elastin-specific probe, day 2). The relative enhancement (RE) of segmented tumor regions (central and margin) and the peritumoral matrix was calculated using pre-contrast and delayed-phase T1w sequences. MRI measurements were correlated to histopathology and element-specific and spatially resolved mass spectrometry (MS). Mixed-model analysis was performed to assess the performance of the elastin-specific probe. In comparison to gadobutrol, the elastin probe showed significantly stronger RE, which was pronounced in the tumor margin (day 14–28: P ≤ 0.007). In addition, the elastin probe was superior in discriminating between tumor regions (χ2(4) = 65.87; P < 0.001). MRI-based measurements of the elastin probe significantly correlated with the ex vivo elastinstain (R = .84; P <0 .001) and absolute gadolinium concentrations (ICP-MS: R = .73, P <0 .01). LA-ICP-MS imaging confirmed the colocalization of the elastin-specific probe with elastic fibers. Elastin-specific molecular MRI is superior to non-specific gadolinium-based contrast agents in imaging the ECM of hepatic tumors and the peritumoral tissue.
KW - Elastin-specific molecular agent
KW - Extracellular matrix
KW - Hepatocellular carcinoma
KW - Inductively coupled plasma mass spectroscopy
KW - Laser ablation-inductively coupled plasma-mass spectrometry
KW - Magnetic resonance imaging
KW - MR imaging
KW - ESMA
KW - Gadolinium
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517360
DO - https://doi.org/10.1038/s41598-020-77624-8
VL - 10
IS - 1
SP - 20785
PB - Nature
AN - OPUS4-51736
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gugin, Nikita
A1 - Yusenko, Kirill
A1 - King, Andrew
A1 - Meyer, Klas
A1 - Al-Sabbagh, Dominik
A1 - Villajos Collado, José Antonio
A1 - Emmerling, Franziska
T1 - Lighting up industrial mechanochemistry: Real-time in situ monitoring of reactive extrusion using energy-dispersive X-ray diffraction
N2 - Mechanochemistry is an environmentally friendly synthetic approach that enables the sustainable production of a wide range of chemicals while reducing or eliminating the need for solvents. Reactive extrusion aims to move mechanochemistry from its conventional gram-scale batch reactions, typically performed in laboratory ball mills, to a continuous, large-scale process. Meeting this challenge requires in situ monitoring techniques to gain insights into reactive extrusion and its underlying processes. While the effectiveness of in situ Raman spectroscopy in providing molecular-level information has been demonstrated, our study uses energy-dispersive X-ray diffraction to monitor reactive extrusion in real time at the crystalline level. Our results provide previously unavailable control over the reactive extrusion process, promoting its perception as an industrially feasible green alternative to traditional solvent-based syntheses.
KW - Mechanochemistry
KW - Reactive extrusion
KW - Green chemistry
KW - In situ studies
KW - Time-resolved in situ
KW - TRIS
KW - Synchrotron radiation
KW - Scalable synthesis
KW - Solid-state reactions
KW - Reaction mechanisms
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-613969
DO - https://doi.org/10.1016/j.chempr.2024.07.033
VL - 10
IS - 11
SP - 1
EP - 16
PB - Elsevier B.V.
AN - OPUS4-61396
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Starkholm, A.
A1 - Al-Sabbagh, Dominik
A1 - Sarisozen, S
A1 - von Reppert, A
A1 - Rössle, M
A1 - Ostermann, Markus
A1 - Unger, E
A1 - Emmerling, Franziska
A1 - Kloo, L
A1 - Svensson, P
A1 - Lang, F
A1 - Maslyanchuk, O.
T1 - Green Fabrication of Sulfonium-Containing Bismuth Materials for High-Sensitivity X-Ray Detection
N2 - Organic–inorganic hybrid materials based on lead and bismuth have recently been proposed as novel X- and gamma-ray detectors for medical imaging, non-destructive testing, and security, due to their high atomic numbers and facile preparation compared to traditional materials like amorphous selenium and Cd(Zn)Te. However, challenges related to device operation, excessively high dark currents, and long-term stability have delayed commercialization. Here, two novel semiconductors incorporating stable sulfonium cations are presented, [(CH3CH2)3S]6Bi8I30 and [(CH3CH2)3S]AgBiI5, synthesized via solvent-free ball milling and fabricated into dense polycrystalline pellets using cold isostatic compression, two techniques that can easily be upscaled, for X-ray detection application. The fabricated detectors exhibit exceptional sensitivities (14 100–15 190 µC Gyair−1 cm−2) and low detection limits (90 nGyair s−1 for [(CH3CH2)3S]6Bi8I30 and 78 nGyair s−1 for [(CH3CH2)3S]AgBiI5), far surpassing current commercial detectors. Notably, they maintain performance after 9 months of ambient storage. The findings highlight [(CH3CH2)3S]6Bi8I30 and [(CH3CH2)3S]AgBiI5 as scalable, cost-effective and highly stable alternatives to traditional semiconductor materials, offering great potential as X-ray detectors in medical and security applications.
KW - Mechanochemistry
KW - X-ray detectors
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630306
DO - https://doi.org/10.1002/adma.202418626
SP - 1
EP - 10
PB - Wiley VHC-Verlag
AN - OPUS4-63030
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kader, A.
A1 - Snellings, J.
A1 - Adams, L. C.
A1 - Gottheil, P.
A1 - Mangarova, D. B.
A1 - Heyl, J. L.
A1 - Kaufmann, Jan Ole
A1 - Moeckel, J.
A1 - Brangsch, J.
A1 - Auer, T. A.
A1 - Collettini, F.
A1 - Sauer, F.
A1 - Hamm, B.
A1 - Käs, J.
A1 - Sack, I.
A1 - Makowski, M. R.
A1 - Braun, J.
T1 - Sensitivity of magnetic resonance elastography to extracellular matrix and cell motility in human prostate cancer cell line-derived xenograft models
N2 - Prostate cancer (PCa) is a significant health problem in the male population of the Western world. Magnetic resonance elastography (MRE), an emerging medical imaging technique sensitive to mechanical properties of biological tissues, detects PCa based on abnormally high stiffness and viscosity values. Yet, the origin of these changes in tissue properties and how they correlate with histopathological markers and tumor aggressiveness are largely unknown, hindering the use of tumor biomechanical properties for establishing a noninvasive PCa staging system.
To infer the contributions of extracellular matrix (ECM) components and cell motility, we investigated fresh tissue specimens from two PCa xenograft mouse models, PC3 and LNCaP, using magnetic resonance elastography (MRE), diffusion-weighted imaging (DWI), quantitative histology, and nuclear shape analysis. Increased tumor stiffness and impaired water diffusion were observed to be associated with collagen and elastin accumulation and decreased cell motility. Overall, LNCaP, while more representative of clinical PCa than PC3, accumulated fewer ECM components, induced less restriction of water diffusion, and exhibited increased cell motility, resulting in overall softer and less viscous properties. Taken together, our results suggest that prostate tumor stiffness increases with ECM accumulation and cell adhesion - characteristics that influence critical biological processes of cancer development.
MRE paired with DWI provides a powerful set of imaging markers that can potentially predict prostate tumor development from benign masses to aggressive malignancies in patients. Statement of significance: Xenograft models of human prostate tumor cell lines, allowing correlation of microstructure-sensitive biophysical imaging parameters with quantitative histological methods, can be investigated to identify hallmarks of cancer.
KW - Magnetic resonance elastography
KW - Quantitative histology
KW - Prostate cancer
KW - Stiffness
KW - Fluidity
KW - Apparent diffusion coefficient
KW - Collagen
KW - Elastin
KW - Nuclear shape
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618361
DO - https://doi.org/10.1016/j.bioadv.2024.213884
SN - 2772-9508
VL - 161
SP - 1
EP - 12
PB - Elsevier
CY - Amsterdam
AN - OPUS4-61836
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Mangarova, Dilyana Branimirova
A1 - Reimann, Carolin
A1 - Kaufmann, Jan Ole
A1 - Möckel, Jana
A1 - Kader, Avan
A1 - Adams, Lisa Christine
A1 - Ludwig, Antje
A1 - Onthank, David
A1 - Robinson, Simon
A1 - Karst, Uwe
A1 - Helmer, Rebecca
A1 - Botnar, Rene
A1 - Hamm, Bernd
A1 - Makowski, Marcus Richard
A1 - Brangsch, Julia
T1 - Elastin-specific MR probe for visualization and evaluation of an interleukin-1β targeted therapy for atherosclerosis
N2 - Atherosclerosis is a chronic inflammatory condition of the arteries and represents the primary cause of various cardiovascular diseases. Despite ongoing progress, finding effective anti-inflammatory therapeutic strategies for atherosclerosis remains a challenge. Here, we assessed the potential of molecular magnetic resonance imaging (MRI) to visualize the effects of 01BSUR, an anti-interleukin-1β monoclonal antibody, for treating atherosclerosis in a murine model. Male apolipoprotein E-deficient mice were divided into a therapy group (01BSUR, 2 × 0.3 mg/kg subcutaneously, n = 10) and control group (no treatment, n = 10) and received a high-fat diet for eight weeks. The plaque burden was assessed using an elastin-targeted gadolinium-based contrast probe (0.2 mmol/kg intravenously) on a 3 T MRI scanner. T1-weighted imaging showed a significantly lower contrast-to-noise (CNR) ratio in the 01BSUR group (pre: 3.93042664; post: 8.4007067) compared to the control group (pre: 3.70679168; post: 13.2982156) following administration of the elastin-specific MRI probe (p < 0.05). Histological examinations demonstrated a significant reduction in plaque size (p < 0.05) and a significant decrease in plaque elastin content (p < 0.05) in the treatment group compared to control animals. This study demonstrated that 01BSUR hinders the progression of atherosclerosis in a mouse model. Using an elastin-targeted MRI probe, we could quantify these therapeutic effects in MRI.
N2 - Atherosklerose ist eine chronische entzündliche Erkrankung der Arterien und die Hauptursache für verschiedene Herz-Kreislauf-Erkrankungen. Trotz kontinuierlicher Fortschritte ist es nach wie vor schwierig, wirksame entzündungshemmende Therapiestrategien für Atherosklerose zu finden. In dieser Studie haben wir das Potenzial der molekularen Magnetresonanztomographie (MRT) zur Visualisierung der Wirkung von 01BSUR, einem monoklonalen Anti-Interleukin-1β-Antikörper, zur Behandlung von Atherosklerose in einem Mausmodell untersucht. Männliche Apolipoprotein-E-defiziente Mäuse wurden in eine Therapiegruppe (01BSUR, 2 × 0,3 mg/kg subkutan, n = 10) und eine Kontrollgruppe (keine Behandlung, n = 10) aufgeteilt und erhielten acht Wochen lang eine fettreiche Diät. Die Plaquebelastung wurde mit einer auf Elastin ausgerichteten Kontrastmittelsonde auf Gadoliniumbasis (0,2 mmol/kg intravenös) auf einem 3-T-MRT-Scanner untersucht. Die T1-gewichtete Bildgebung zeigte ein signifikant niedrigeres Kontrast-Rausch-Verhältnis (CNR) in der 01BSUR-Gruppe (vorher: 3,93042664; nachher: 8,4007067) im Vergleich zur Kontrollgruppe (vorher: 3,70679168; nachher: 13,2982156) nach Verabreichung der Elastin-spezifischen MRT-Sonde (p < 0,05). Histologische Untersuchungen zeigten eine signifikante Verringerung der Plaque-Größe (p < 0,05) und eine signifikante Abnahme des Plaque-Elastin-Gehalts (p < 0,05) in der Behandlungsgruppe im Vergleich zu den Kontrolltieren. Diese Studie zeigte, dass 01BSUR das Fortschreiten der Atherosklerose in einem Mausmodell hemmt. Mit einer auf Elastin ausgerichteten MRT-Sonde konnten wir diese therapeutischen Effekte in der MRT quantifizieren.
KW - Atherosclerosis
KW - Molecular imaging
KW - Elastin
KW - Plaque
KW - Interleukin-1beta
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-610858
DO - https://doi.org/10.1038/s41598-024-71716-5
VL - 14
IS - 1
SP - 1
EP - 11
PB - Springer Science and Business Media LLC
AN - OPUS4-61085
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Nerger, Tino
A1 - Neumann, Patrick P.
A1 - Weller, Michael G.
T1 - Drone-Based Localization of Hazardous Chemicals by Passive Smart Dust
N2 - The distribution of tiny sensors over a specific area was first proposed in the late 1990s as a concept known as smart dust. Several efforts focused primarily on computing and networking capabilities, but quickly ran into problems related to power supply, cost, data transmission, and environmental pollution. To overcome these limitations, we propose using paper-based (confetti-like) chemosensors that exploit the inherent selectivity of chemical reagents, such as colorimetric indicators. In this work, cheap and biodegradable passive sensors made from cellulose could successfully indicate the presence of hazardous chemicals, e.g., strong acids, by a significant color change. A conventional color digital camera attached to a drone could easily detect this from a safe distance. The collected data were processed to define the hazardous area. Our work presents a combination of the smart dust concept, chemosensing, paper-based sensor technology, and low-cost drones for flexible, sensitive, economical, and rapid detection of hazardous chemicals in high-risk scenarios.
KW - Cellulose
KW - Passive Smart Dust
KW - Drohne
KW - Kolorimetrische Sensoren
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614641
DO - https://doi.org/10.3390/s24196195
VL - 24
IS - 19
SP - 1
EP - 16
PB - MDPI
AN - OPUS4-61464
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tscheuschner, Georg
A1 - Ponader, Marco
A1 - Raab, Christopher
A1 - Weider, Prisca S.
A1 - Hartfiel, Reni
A1 - Kaufmann, Jan Ole
A1 - Völzke, Jule L.
A1 - Bosc-Bierne, Gaby
A1 - Prinz, Carsten
A1 - Schwaar, T.
A1 - Andrle, Paul
A1 - Bäßler, Henriette
A1 - Nguyen, Khoa
A1 - Zhu, Y.
A1 - Mey, A. S. J. S.
A1 - Mostafa, A.
A1 - Bald, I.
A1 - Weller, Michael G.
T1 - Efficient Purification of Cowpea Chlorotic Mottle Virus by a Novel Peptide Aptamer
N2 - The cowpea chlorotic mottle virus (CCMV) is a plant virus explored as a nanotechnological platform. The robust self-assembly mechanism of its capsid protein allows for drug encapsulation and targeted delivery. Additionally, the capsid nanoparticle can be used as a programmable platform to display different molecular moieties. In view of future applications, efficient production and purification of plant viruses are key steps. In established protocols, the need for ultracentrifugation is a significant limitation due to cost, difficult scalability, and safety issues. In addition, the purity of the final virus isolate often remains unclear. Here, an advanced protocol for the purification of the CCMV from infected plant tissue was developed, focusing on efficiency, economy, and final purity. The protocol involves precipitation with PEG 8000, followed by affinity extraction using a novel peptide aptamer. The efficiency of the protocol was validated using size exclusion chromatography, MALDI-TOF mass spectrometry, reversed-phase HPLC, and sandwich immunoassay. Furthermore, it was demonstrated that the final eluate of the affinity column is of exceptional purity (98.4%) determined by HPLC and detection at 220 nm. The scale-up of our proposed method seems to be straightforward, which opens the way to the large-scale production of such nanomaterials. This highly improved protocol may facilitate the use and implementation of plant viruses as nanotechnological platforms for in vitro and in vivo applications.
N2 - Das Cowpea Chlorotic Mottle Virus (CCMV) ist ein Pflanzenvirus, das als nanotechnologische Plattform erforscht wird. Der robuste Selbstorganisationsmechanismus seines Kapsidproteins ermöglicht die Verkapselung und gezielte Abgabe von Medikamenten. Darüber hinaus kann das Kapsid-Nanopartikel als programmierbare Plattform für die Präsentation verschiedener molekularer Komponenten verwendet werden. Im Hinblick auf künftige Anwendungen ist eine effiziente Produktion und Reinigung von Pflanzenviren von entscheidender Bedeutung. In etablierten Protokollen stellt die notwendige Ultrazentrifugation aufgrund von Kosten, schwieriger Skalierbarkeit und Sicherheitsaspekten eine erhebliche Einschränkung dar. Darüber hinaus bleibt die Reinheit des endgültigen Virusisolats oft unklar. Hier wurde ein fortschrittliches Protokoll für die Reinigung von CCMV aus infiziertem Pflanzengewebe entwickelt, wobei der Schwerpunkt auf Effizienz, Wirtschaftlichkeit und Reinheit lag. Das Protokoll beinhaltet eine Fällung mit Polyethylenglycol (PEG 8000), gefolgt von einer Affinitätsextraktion mit einem neuartigen Peptid-Aptamer. Die Effizienz des Protokolls wurde mithilfe von Größenausschluss-Chromatographie (SEC), MALDI-TOF-Massenspektrometrie, Umkehrphasen-HPLC und Sandwich-Immunoassay validiert. Darüber hinaus wurde nachgewiesen, dass das endgültige Eluat der Affinitätssäule eine außergewöhnliche Reinheit (98,4 %) aufweist, die durch HPLC und Detektion bei 220 nm bestimmt wurde. Die Skalierung der von uns vorgeschlagenen Methode scheint einfach zu sein, was den Weg für eine größer angelegte Produktion solcher Nanomaterialien ebnet. Dieses stark verbesserte Protokoll könnte die Verwendung und Umsetzung von Pflanzenviren als nanotechnologische Plattformen für In-vitro- und In-vivo-Anwendungen erleichtern.
KW - Affinity chromatography
KW - Nanoparticles
KW - Nanoscience
KW - Carrier protein
KW - Encapsulation
KW - Combinatorial peptide library
KW - Peptide binder
KW - Vigna unguiculata
KW - Augenbohne
KW - Schlangenbohne
KW - Pflanzenvirus
KW - Plant virus
KW - Upscaling
KW - Commercialization
KW - Reference material
KW - Nanocarrier
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-572645
DO - https://doi.org/10.3390/v15030697
VL - 15
IS - 3
SP - 1
EP - 24
PB - MDPI
CY - Basel, Schweiz
AN - OPUS4-57264
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Beslic, D.
A1 - Tscheuschner, Georg
A1 - Renard, B. Y.
A1 - Weller, Michael G.
A1 - Muth, Thilo
T1 - Comprehensive evaluation of peptide de novo sequencing tools for monoclonal antibody assembly
N2 - Monoclonal antibodies are biotechnologically produced proteins with various applications in research, therapeutics and diagnostics. Their ability to recognize and bind to specific molecule structures makes them essential research tools and therapeutic agents. Sequence information of antibodies is helpful for understanding antibody–antigen interactions and ensuring their affinity and specificity. De novo protein sequencing based on mass spectrometry is a valuable method to obtain the amino acid sequence of peptides and proteins without a priori knowledge. In this study, we evaluated six recently developed de novo peptide sequencing algorithms (Novor, pNovo 3, DeepNovo, SMSNet, PointNovo and Casanovo), which were not specifically designed for antibody data. We validated their ability to identify and assemble antibody sequences on three multi-enzymatic data sets. The deep learning-based tools Casanovo and PointNovo showed an increased peptide recall across different enzymes and data sets compared with spectrum-graph-based approaches. We evaluated different error types of de novo peptide sequencing tools and their performance for different numbers of missing cleavage sites, noisy spectra and peptides of various lengths. We achieved a sequence coverage of 97.69–99.53% on the light chains of three different antibody data sets using the de Bruijn assembler ALPS and the predictions from Casanovo. However, low sequence coverage and accuracy on the heavy chains demonstrate that complete de novo protein sequencing remains a challenging issue in proteomics that requires improved de novo error correction, alternative digestion strategies and hybrid approaches such as homology search to achieve high accuracy on long protein sequences.
KW - De novo peptide sequencing
KW - Bioinformatics
KW - Benchmarking study
KW - Monoclonal antibody
KW - Mass spectrometry
KW - Sequence coverage
KW - Light chains
KW - Heavy chains
KW - IgG
KW - Immunoglobulins
KW - Error correction
KW - Sequencing algorithm
KW - Preprocessing
KW - Missing fragmentation sites
KW - Deep learning-based tools
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570363
DO - https://doi.org/10.1093/bib/bbac542
VL - 24
IS - 1
SP - 1
EP - 12
PB - Oxford University Press
AN - OPUS4-57036
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Fröhlich-Nowoisky, J.
A1 - Bothen, N.
A1 - Backes, A. T.
A1 - Weller, Michael G.
A1 - Pöschl, U.
T1 - Oligomerization and tyrosine nitration enhance the allergenic potential of the birch and grass pollen allergens Bet v 1 and Phl p 5
N2 - Protein modifications such as oligomerization and tyrosine nitration alter the immune response to allergens and may contribute to the increasing prevalence of allergic diseases. In this mini-review, we summarize and discuss relevant findings for the major birch and grass pollen allergens Bet v 1 and Phl p 5 modified with tetranitromethane (laboratory studies), peroxynitrite (physiological processes), and ozone and nitrogen dioxide environmental conditions). We focus on tyrosine nitration and the formation of protein dimers and higher oligomers via dityrosine cross-linking and the immunological effects studied.
N2 - Proteinmodifikationen wie Oligomerisierung und Tyrosinnitrierung verändern die Immunantwort auf Allergene und tragen möglicherweise zur zunehmenden Prävalenz allergischer Erkrankungen bei. In diesem Mini-Review fassen wir relevante Befunde zu den wichtigsten Birken- und Gräserpollenallergenen Bet v 1 und Phl p 5 zusammen, die mit Tetranitromethan (Laborstudien), Peroxynitrit (physiologische Prozesse) und Ozon und Stickstoffdioxid (Umweltbedingungen). Wir konzentrieren uns auf die Tyrosin-Nitrierung und die Bildung von Proteindimeren und höheren Oligomeren durch Dityrosin-Vernetzung und deren immunologischen Auswirkungen.
KW - Allergy
KW - Nitration
KW - Protein oligomers
KW - Air pollution
KW - Ozone
KW - Nitrogen oxides
KW - Tyrosine
KW - Nitrotyrosine
KW - Dityrosine
KW - Dityrosine crosslinking
KW - Protein degradation
KW - Neoepitopes
KW - Neoallergen
KW - IgE
KW - Immunoglobulin E
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-591453
DO - https://doi.org/10.3389/falgy.2023.1303943
VL - 4
SP - 1
EP - 8
PB - Frontiers Media
CY - Switzerland
AN - OPUS4-59145
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Reinmuth-Selzle, K.
A1 - Bellinghausen, I.
A1 - Leifke, A. L.
A1 - Backes, A. T.
A1 - Bothen, N.
A1 - Ziegler, K.
A1 - Weller, Michael G.
A1 - Saloga, J.
A1 - Schuppan, D.
A1 - Lucas, K.
A1 - Pöschl, U.
A1 - Fröhlich-Nowoisky, J.
T1 - Chemical modification by peroxynitrite enhances TLR4 activation of the grass pollen allergen Phl p 5
N2 - The chemical modification of aeroallergens by reactive oxygen and nitrogen species (ROS/RNS) may contribute to the growing prevalence of respiratory allergies in industrialized countries. Post-translational modifications can alter the immunological properties of proteins, but the underlying mechanisms and effects are not well understood. In this study, we investigate the Toll-like receptor 4 (TLR4) activation of the major birch and grass pollen allergens Bet v 1 and Phl p 5, and how the physiological oxidant peroxynitrite (ONOO–) changes the TLR4 activation through protein nitration and the formation of protein dimers and higher oligomers. Of the two allergens, Bet v 1 exhibited no TLR4 activation, but we found TLR4 activation of Phl p 5, which increased after modification with ONOO– and may play a role in the sensitization against this grass pollen allergen. We attribute the TLR4 activation mainly to the two-domain structure of Phl p 5 which may promote TLR4 dimerization and activation. The enhanced TLR4 signaling of the modified allergen indicates that the ONOO–-induced modifications affect relevant protein-receptor interactions. This may lead to increased sensitization to the grass pollen allergen and thus contribute to the increasing prevalence of allergies in the Anthropocene, the present era of globally pervasive anthropogenic influence on the environment.
KW - Bet v 1
KW - Birch pollen allergen
KW - Phl p 5
KW - Grass pollen
KW - Phleum pratense
KW - Betula pendula
KW - Nitration
KW - Nitrotyrosine
KW - Protein nitration
KW - Toll-like receptor 4
KW - Allergy
KW - Enhancement
KW - Oligomerization
KW - Dimerization
KW - TLR4 activation
KW - Air pollution
KW - Nitrogen oxides
KW - Inflammation
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570298
DO - https://doi.org/10.3389/falgy.2023.1066392
VL - 4
SP - 1
EP - 7
PB - Frontiers Media SA
CY - Lausanne, Switzerland
AN - OPUS4-57029
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tchipilov, Teodor
A1 - Meyer, Klas
A1 - Weller, Michael G.
T1 - Quantitative 1H nuclear magnetic resonance (qNMR) of aromatic amino acids for protein quantification
N2 - Hydrolysis of protein samples into amino acids facilitates the use of NMR spectroscopy for protein and peptide quantification. Different conditions have been tested for quantifying aromatic amino acids and proteins. The pH-dependent signal shifts in the aromatic region of amino acid samples were examined. A pH of 12 was found to minimize signal overlap of the four aromatic amino acids. Several aromatic compounds, such as terephthalic acid, sulfoisophthalic acid, and benzene tricarboxylic acid, were applied as internal standards. The quantification of amino acids from an amino acid standard was performed. Using the first two suggested internal standards, recovery was ~97% for histidine, phenylalanine, and tyrosine at a concentration of approximately 1 mM in solution. Acidic hydrolysis of a certified reference material (CRM) of bovine serum albumin (BSA) and subsequent quantification of Phe and Tyr yielded recoveries of 98% ± 2% and 88% ± 4%, respectively, at a protein concentration of 16 g/L or 250 µM.
KW - Amino acid analysis
KW - Aromatic amino acid analysis
KW - AAA
KW - AAAA
KW - Protein hydrolysis
KW - Hydrochloric acid
KW - Metrology
KW - Traceability
KW - NIST
KW - Reference materials
KW - Internal standard
KW - Calibration
KW - Compound-independent calibration
KW - Histidine
KW - Tyrosine
KW - Tryptophan
KW - Phenylalanine
KW - Terephthalic acid
KW - Benzene-1,3,5-tricarboxylic acid
KW - Bovine serum albumin (BSA)
KW - Quantitative protein analysis
KW - Phenylketonuria
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570943
DO - https://doi.org/10.3390/mps6010011
VL - 6
IS - 1
SP - 1
EP - 13
PB - MDPI
CY - Basel, Schweiz
AN - OPUS4-57094
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Villajos Collado, José Antonio
A1 - Bienert, M.
A1 - Gugin, Nikita
A1 - Emmerling, Franziska
A1 - Maiwald, Michael
T1 - A database to select affordable MOFs for volumetric hydrogen cryoadsorption considering the cost of their linkers
N2 - Physical adsorption at cryogenic temperature (cryoadsorption) is a reversible mechanism that can reduce the pressure of conventional compressed gas storage systems. Metal–organic framework (MOF) materials are remarkable candidates due to the combination of high specific surface area and density which, in some cases, provide a high volumetric storage capacity. However, such extensive use of MOFs for this application requires the selection of affordable structures, easy to produce and made from feasible metallic and organic components. Herein, we introduce a MOF database detailing the crystallographic and porous properties of 3600 existing MOFs made from industrially relevant metals and their organic composition. The comparison of the available minimum costs of linkers allowed the creation of a database to select affordable structures with high potential for volumetric hydrogen storage by cryoadsorption, considering their composition based on individual or mixed building blocks. A user inter� face, available online, facilitates the selection of MOFs based on the properties or names of structures and linkers.
KW - MOF´s
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-583619
DO - https://doi.org/10.1039/d3ma00315a
VL - 4
IS - 18
SP - 4226
EP - 4237
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-58361
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Paul, Martin
A1 - Tscheuschner, Georg
A1 - Herrmann, Stefan
A1 - Weller, Michael G.
T1 - Fast Detection of 2,4,6-Trinitrotoluene (TNT) at ppt Level by a Laser-Induced Immunofluorometric Biosensor
N2 - The illegal use of explosives by terrorists and other criminals is an increasing issue in public spaces, such as airports, railway stations, highways, sports venues, theaters, and other large buildings. Security in these environments can be achieved by different means, including the installation of scanners and other analytical devices to detect ultra-small traces of explosives in a very short time-frame to be able to take action as early as possible to prevent the detonation of such devices. Unfortunately, an ideal explosive detection system still does not exist, which means that a compromise is needed in practice. Most detection devices lack the extreme analytical sensitivity, which is nevertheless necessary due to the low vapor pressure of nearly all explosives. In addition, the rate of false positives needs to be virtually zero, which is also very difficult to achieve. Here we present an immunosensor system based on kinetic competition, which is known to be very fast and may even overcome affinity limitation, which impairs the performance of many traditional competitive assays. This immunosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. In the case of the explosive 2,4,6-trinitrotoluene (TNT), some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and chip-based mixing-devices and flow-cells. The system achieved limits of detection of 1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of TNT. The total assay time is less than 8 min. A cross-reactivity test with 5000 pM solutions showed no signal by pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX). This immunosensor belongs to the most sensitive and fastest detectors for TNT with no significant cross-reactivity by non-related compounds. The consumption of the labeled antibody is surprisingly low: 1 mg of the reagent would be sufficient for more than one year of continuous biosensor operation.
KW - Airport
KW - Aviation
KW - Bombs
KW - Terrorism
KW - Biosensing
KW - Continuous Sensor
KW - High-Speed
KW - Ultrasensitive
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-511245
DO - https://doi.org/10.3390/bios10080089
VL - 10
IS - 8
SP - 89
PB - MDPI
CY - Basel
AN - OPUS4-51124
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Costa, Elena
A1 - Climent Terol, Estela
A1 - Gawlitza, Kornelia
A1 - Wan, Wei
A1 - Weller, Michael G.
A1 - Rurack, Knut
T1 - Optimization of analytical assay performance of antibody-gated indicator-releasing mesoporous silica particles
N2 - Antibody-gated indicator delivery (gAID) systems based on mesoporous silica nano- and microparticle scaffolds are a promising class of materials for the sensitive chemical detection of small-molecule analytes in simple test formats such as lateral flow assays (LFAs) or microfluidic chips. Their architecture is reminiscent of drug delivery systems, only that reporter molecules instead of drugs are stored in the voids of a porous host particle. In addition, the pores are closed with macromolecular “caps” through a tailored “gatekeeping” recognition chemistry so that the caps are opened when an analyte has reacted with a “gatekeeper”. The subsequent uncapping leads to a release of a large number of indicator molecules, endowing the system with signal amplification features. Particular benefits of such systems are their modularity and adaptability. With the example of the immunochemical detection of type-I pyrethroids by fluorescent dye-releasing gAID systems, the influence of several tuning modes on the optimisation of such hybrid sensory materials is introduced here. In particular, different mesoporous silica supports (from nano- and microparticles to platelets and short fibres), different functionalisation routes and different loading sequences were assessed. The materials’ performances were evaluated by studying their temporal response behaviour and detection sensitivity, including the tightness of pore closure (through the amount of blank release in the absence of analyte) and the release kinetics. Our results indicate that the better the paratope-accommodating Fab region of the antibody “cap” fits into the host material's pore opening, the better the closing/opening mechanism can be controlled. Because such materials are well-suited for LFAs, performance assessment included a test-strip format besides conventional assays in suspension. In combination with dyes as indicators and smartphones for read-out, simple analytical tests for use by untrained personnel directly at a point-of-need such as an aeroplane cabin can be devised, allowing for sensitivities down to the μg kg−1 range in <5 min with case-required selectivities.
KW - Antibody-gated indicator delivery
KW - Lateral flow assay
KW - SBA-15
KW - SBA-16
KW - Type-I pyrethroids
KW - Phenothrin
KW - Permethrin
KW - Etofenprox
KW - Amplification
KW - Biosensors
KW - Immunoassays
KW - Mesoporous particles
KW - Optical detection
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517053
DO - https://doi.org/10.1039/d0tb00371a
VL - 8
IS - 22
SP - 4950
EP - 4961
PB - Royal Society of Chemistry
AN - OPUS4-51705
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tscheuschner, Georg
A1 - Schwaar, Timm
A1 - Weller, Michael G.
T1 - Fast Confirmation of Antibody Identity by MALDI-TOF MS Fingerprints
N2 - Thousands of antibodies for diagnostic and other analytical purposes are on the market. However, it is often difficult to identify duplicates, reagent changes, and to assign the correct original publications to an antibody. This slows down scientific progress and might even be a cause of irreproducible research and a waste of resources. Recently, activities were started to suggest the sole use of recombinant antibodies in combination with the open communication of their sequence. In this case, such uncertainties should be eliminated. Unfortunately, this approach seems to be rather a long-term vision since the development and manufacturing of recombinant antibodies remain quite expensive in the foreseeable future. Nearly all commercial antibody suppliers also may be reluctant to publish the sequence of their antibodies, since they fear counterfeiting. De novo sequencing of antibodies is also not feasible today for a reagent user without access to the hybridoma clone. Nevertheless, it seems to be crucial for any scientist to have the opportunity to identify an antibody undoubtedly to guarantee the traceability of any research activity using antibodies from a third party as a tool. For this purpose, we developed a method for the identification of antibodies based on a MALDI-TOF MS fingerprint. To circumvent lengthy denaturation, reduction, alkylation, and enzymatic digestion steps, the fragmentation was performed with a simple formic acid hydrolysis step. Eighty-nine unknown monoclonal antibodies were used for this study to examine the feasibility of this approach. Although the molecular assignment of peaks was rarely possible, antibodies could be easily recognized in a blinded test, simply from their mass-spectral fingerprint. A general protocol is given, which could be used without any optimization to generate fingerprints for a database. We want to propose that, in most scientific projects relying critically on antibody reagents, such a fingerprint should be established to prove and document the identity of the used antibodies, as well as to assign a specific reagent to a datasheet of a commercial supplier, public database record, or antibody ID.
KW - Reproducibility
KW - Quality Control
KW - Traceability
KW - Diagnostics
KW - Hybridoma
KW - Monoclonal Antibody
KW - Recombinant Antibody
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-506611
DO - https://doi.org/10.3390/antib9020008
SN - 2073-4468
VL - 9
IS - 2
SP - 1
EP - 17
PB - MDPI
CY - Basel
AN - OPUS4-50661
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ziegler, K.
A1 - Kunert, A. T.
A1 - Reinmuth-Selzle, K.
A1 - Leifke, A. L.
A1 - Widera, D.
A1 - Weller, Michael G.
A1 - Schuppan, D.
A1 - Fröhlich-Nowoisky, J.
A1 - Lucas, K.
A1 - Pöschl, U.
T1 - Chemical modification of pro-inflammatory proteins by peroxynitrite increases activation of TLR4 and NF-κB: Implications for the health effects of air pollution and oxidative stress
N2 - Environmental pollutants like fine particulate matter can cause adverse health effects through oxidative stress and inflammation. Reactive oxygen and nitrogen species (ROS/RNS) such as peroxynitrite can chemically modify proteins, but the effects of such modifications on the immune system and human health are not well understood. In the course of inflammatory processes, the Toll-like receptor 4 (TLR4) can sense damage-associated molecular patterns (DAMPs). Here, we investigate how the TLR4 response and pro-inflammatory potential of the proteinous DAMPs α-Synuclein (α-Syn), heat shock protein 60 (HSP60), and high-mobility-group box 1 protein (HMGB1), which are relevant in neurodegenerative and cardiovascular diseases, changes upon chemical modification with peroxynitrite.
For the peroxynitrite-modified proteins, we found a strongly enhanced activation of TLR4 and the pro-inflammatory transcription factor NF-κB in stable reporter cell lines as well as increased mRNA expression and secretion of the pro-inflammatory cytokines TNF-α, IL-1β, and IL-8 in human monocytes (THP-1). This enhanced activation of innate immunity via TLR4 is mediated by covalent chemical modifications of the studied DAMPs.
Our results show that proteinous DAMPs modified by peroxynitrite more potently amplify inflammation via TLR4 activation than the native DAMPs, and provide first evidence that such modifications can directly enhance innate immune responses via a defined receptor. These findings suggest that environmental pollutants and related ROS/RNS may play a role in promoting acute and chronic inflammatory disorders by structurally modifying the body's own DAMPs. This may have important consequences for chronic neurodegenerative, cardiovascular or gastrointestinal diseases that are prevalent in modern societies, and calls for action, to improve air quality and climate in the Anthropocene.
KW - Protein nitration
KW - Protein oligomerization
KW - Damage-associated molecular patterns (DAMPs)
KW - Pattern recognition receptor
KW - Anthropocene
KW - Environmental pollutants
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517128
DO - https://doi.org/10.1016/j.redox.2020.101581
VL - 37
SP - 101581
PB - Elsevier B.V.
AN - OPUS4-51712
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Brangsch, J.
A1 - Reimann, C.
A1 - Kaufmann, Jan Ole
A1 - Adams, L. C.
A1 - Onthank, D.
A1 - Thöne-Reineke, C.
A1 - Robinson, S.
A1 - Ponader, Marco
A1 - Weller, Michael G.
A1 - Buchholz, R.
A1 - Karst, U.
A1 - Botnar, R.
A1 - Hamm, B.
A1 - Makowski, M. R.
T1 - Molecular MR-Imaging for Noninvasive Quantification of the Anti-Inflammatory Effect of Targeting Interleukin-1β in a Mouse Model of Aortic Aneurysm
N2 - Background:
Molecular-MRI is a promising imaging modality for the assessment of abdominal aortic aneurysms (AAAs). Interleukin-1β (IL-1β) represents a new therapeutic tool for AAA-treatment, since pro-inflammatory cytokines are key-mediators of inflammation. This study investigates the potential of molecular-MRI to evaluate therapeutic effects of an anti-IL-1β-therapy on AAA-formation in a mouse-model.
Methods:
Osmotic-minipumps were implanted in apolipoprotein-deficient-mice (N = 27). One group (Ang-II+01BSUR group, n = 9) was infused with angiotensin-II (Ang-II) for 4 weeks and received an anti-murine IL-1β-antibody (01BSUR) 3 times. One group (Ang-II-group, n = 9) was infused with Ang-II for 4 weeks but received no treatment. Control-group (n = 9) was infused with saline and received no treatment. MR-imaging was performed using an elastin-specific gadolinium-based-probe (0.2 mmol/kg).
Results:
Mice of the Ang-II+01BSUR-group showed a lower aortic-diameter compared to mice of the Ang-II-group and control mice (p < 0.05). Using the elastin-specific-probe, a significant decrease in elastin-destruction was observed in mice of the Ang-II+01BSUR-group. In vivo MR-measurements correlated well with histopathology (y = 0.34x-13.81, R2 = 0.84, p < 0.05), ICP-MS (y = 0.02x+2.39; R2 = 0.81, p < 0.05) and LA-ICP-MS. Immunofluorescence and western-blotting confirmed a reduced IL-1β-expression.
Conclusions:
Molecular-MRI enables the early visualization and quantification of the anti-inflammatory-effects of an IL-1β-inhibitor in a mouse-model of AAAs. Responders and non-responders could be identified early after the initiation of the therapy using molecular-MRI.
KW - Cardiovascular
KW - Molecular-MRI
KW - Magnetic resonance imaging
KW - Gadolinium-based contrast agent
KW - Elastin-specific contrast agent ESMA
KW - Gadovist
KW - Gadofosveset
KW - MR Angiography
KW - Inductively Coupled Mass Spectroscopy
KW - Element Specific Bioimaging Using Laser Ablation
KW - Visualization
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517150
DO - https://doi.org/10.1177/1536012120961875
N1 - Geburtsname von Ponader, Marco: Wilke, M. - Birth name of Ponader, Marco: Wilke, M.
VL - 19
SP - 61875
PB - SAGE
AN - OPUS4-51715
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Climent Terol, Estela
A1 - Biyikal, Mustafa
A1 - Gröninger, Delia
A1 - Weller, Michael G.
A1 - Martínez Mánez, R.
A1 - Rurack, Knut
T1 - Multiplex‐Nachweis von Analyten auf einem einzelnen Teststreifen mit Antikörper‐gesteuerten und Indikator freisetzenden mesoporösen Nanopartikeln
N2 - Vor dem Hintergrund der einzigartigen Modularität, hohen Empfindlichkeit und Selektivität von Antikörper‐gesteuerten Indikatorfreisetzungssystemen (gAID‐Systemen) wurde hier ein Multiplex‐Assay für drei organische Explosivstoffmoleküle (TATP, TNT, PETN) entwickelt, der es erlaubt, die Analyten gleichzeitig in flüssiger Phase mit einem einzelnen Teststreifen und einem Fluoreszenzlesegerät bzw. Smartphone als Detektor in Konzentrationen bis in den unteren ppb‐Bereich in <5 min nachzuweisen. Alle drei Systeme, darunter die hier neu entwickelten Systeme für TNT und PETN, tolerieren zudem nicht nur gepufferte wässrige Modelllösungen, sondern auch komplexere Matrices. Neben einem konventionellen Teststreifen mit einem Kanal erlaubte uns die Anwendung von Wachsdrucktechnologie das Herstellen von mehrkanaligen Streifen mit vergleichbarer analytischer Leistungsfähigkeit, was das enorme Potenzial der modular aufgebauten, hybriden Biosensormaterialien im Hinblick auf eine für den Endanwender maßgeschneiderte Vor‐Ort‐Analytik unterstreicht.
KW - Multiplex
KW - Gesteuerten Nanopartikeln
KW - Explosiven
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-518431
DO - https://doi.org/10.1002/ange.202009000
SN - 1521-3757
SN - 0044-8249
VL - 132
IS - 52
SP - 24071
EP - 24078
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-51843
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Climent Terol, Estela
A1 - Biyikal, Mustafa
A1 - Gröninger, Delia
A1 - Weller, Michael G.
A1 - Martínez Mánez, R.
A1 - Rurack, Knut
ED - Climent Terol, Estela
T1 - Multiplexed Detection of Analytes on Single Test Strips with Antibody-Gated Indicator-Releasing Mesoporous Nanoparticles
N2 - Rapid testing methods for the use directly at apointof need are expected to unfold their true potential especiallywhen offering adequate capabilities for the simultaneousmeasurement of multiple analytes of interest. Considering theunique modularity,high sensitivity,and selectivity of antibody-gated indicator delivery (gAID) systems,amultiplexed assayfor three small-molecule explosives (TATP, TNT,PETN) wasthus developed, allowing to detect the analytes simultaneouslywith asingle test strip at lower ppb concentrations in the liquidphase in < 5min using afluorescence reader or asmartphonefor readout. While the TNT and PETN systems were newlydeveloped here,all the three systems also tolerated harshermatrices than buffered aqueous model solutions.Besidesasingle-track strip,the outstanding modularity of the hybridbiosensor materials in combination with strip-patterningtechnologies allowed us to obtain amultichannel strip inastraightforwardmanner,offering comparable analyticalperformance while allowing to be tailored even more to theusersneed.
KW - Multiplexing
KW - Explosives detection
KW - Gated materials
KW - Fluorescence
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-518424
DO - https://doi.org/10.1002/anie.202009000
SN - 1433-7851
SN - 1521-3773
VL - 59
IS - 52
SP - 23862
EP - 23869
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-51842
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weller, Michael G.
T1 - The Protocol Gap
N2 - Although peer review is considered one of the main pillars of modern science, experimental methods and protocols seem to be not a rigorous subject of this process in many papers. Commercial equipment, test kits, labeling kits, previously published concepts, and standard protocols are often considered to be not worth a detailed description or validation. Even more disturbing is the extremely biased citation behavior in this context, which sometimes leads to surrogate citations to avoid low-impact journals, preprints, or to indicate traditional practices. This article describes some of these surprising habits and suggests some measures to avoid the most unpleasant effects, which in the long term may undermine the credibility of science as a whole.
KW - Validation
KW - Peer review
KW - Experiment
KW - Documentation
KW - Scientific publication
KW - Reproducibility crisis
KW - Replication crisis
KW - Trust
KW - Citation
KW - References
KW - Surrogate citations
KW - Impact
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-521440
DO - https://doi.org/10.3390/mps4010012
SN - 2409-9279
VL - 4
IS - 1
SP - 1
EP - 5
PB - MDPI
CY - Basel
AN - OPUS4-52144
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Chapartegui-Arias, Ander
A1 - Raysyan, A.
A1 - Belenguer, A. M.
A1 - Jaeger, Carsten
A1 - Tchipilov, Teodor
A1 - Prinz, Carsten
A1 - Abad Andrade, Carlos Enrique
A1 - Beyer, S.
A1 - Schneider, Rudolf
A1 - Emmerling, Franziska
T1 - Tailored mobility in a zeolite imidazolate framework (ZIF) antibody conjugate
N2 - Zeolitic imidazolate framework (ZIF) hybrid fluorescent nanoparticles and ZIF antibody conjugates have been synthesized, characterized, and employed in lateral-flow immunoassay (LFIA). The bright fluorescence of the conjugates and the possibility to tailor their mobility gives a huge potential for diagnostic assays. An enzyme-linked immunosorbent assay (ELISA) with horseradish peroxidase (HRP) as label, proved the integrity, stability, and dispersibility of the antibody conjugates, LC-MS/MS provided evidence that a covalent link was established between these metal-organic frameworks and lysine residues in IgG antibodies.
KW - ZIF
KW - ELISA
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-532096
DO - https://doi.org/10.1002/chem.202100803
SN - 0947-6539
SN - 1521-3765
VL - 27
IS - 36
SP - 9414
EP - 9421
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-53209
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Fischer, Janina
A1 - Kaufmann, Jan Ole
A1 - Weller, Michael G.
T1 - Simple Determination of Affinity Constants of Antibodies by Competitive Immunoassays
N2 - The affinity constant, also known as the equilibrium constant, binding constant, equilibrium association constant, or the reciprocal value, the equilibrium dissociation constant (Kd), can be considered as one of the most important characteristics for any antibody–antigen pair. Many methods based on different technologies have been proposed and used to determine this value. However, since a very large number of publications and commercial datasheets do not include this information, significant obstacles in performing such measurements seem to exist. In other cases where such data are reported, the results have often proved to be unreliable. This situation may indicate that most of the technologies available today require a high level of expertise and effort that does not seem to be available in many laboratories. In this paper, we present a simple approach based on standard immunoassay technology that is easy and quick to perform. It relies on the effect that the molar IC50 approaches the Kd value in the case of infinitely small concentrations of the reagents. A two-dimensional dilution of the reagents leads to an asymptotic convergence to Kd. The approach has some similarity to the well-known checkerboard titration used for the optimization of immunoassays. A well-known antibody against the FLAG peptide, clone M2, was used as a model system and the results were compared with other methods. This approach could be used in any case where a competitive assay is available or can be developed. The determination of an affinity constant should belong to the crucial parameters in any quality control of antibody-related products and assays and should be mandatory in papers using immunochemical protocols.
N2 - Die Affinitätskonstante, auch bekannt als Gleichgewichtskonstante, Bindungskonstante, Gleichgewichtsassoziationskonstante oder der reziproke Wert, die Gleichgewichtsdissoziationskonstante (Kd), kann als eine der wichtigsten Eigenschaften für jedes Antikörper-Antigen-Paar angesehen werden. Zur Bestimmung dieses Wertes wurden zahlreiche Methoden auf der Grundlage verschiedener Technologien vorgeschlagen und verwendet. Da jedoch eine sehr große Anzahl von Veröffentlichungen und kommerziellen Datenblätter diese Information nicht enthalten, scheint es erhebliche Hindernisse bei der Durchführung solcher Messungen zu geben. In anderen Fällen, in denen solche Daten angegeben werden, haben sich die Ergebnisse häufig als unzuverlässig erwiesen. Diese Situation könnte darauf hindeuten, dass die meisten der heute verfügbaren Technologien ein hohes Maß an Fachwissen und Aufwand erfordern, das in vielen Labors nicht vorhanden zu sein scheint. In diesem Beitrag stellen wir einen einfachen Ansatz vor, der auf der Standard-Immunoassay-Technologie basiert und einfach und schnell durchführbar ist. Er beruht auf dem Effekt, dass sich der molare IC50 bei unendlich kleinen Reagenz-Konzentrationen dem Kd-Wert annähert. Eine zweidimensionale Verdünnung der Reagenzien führt zu einer asymptotischen Konvergenz zu Kd. Der Ansatz hat eine gewisse Ähnlichkeit mit der bekannten Checkerboard-Titration, die zur Optimierung von Immunoassays verwendet wird. Ein bekannter Antikörper gegen das FLAG-Peptid, Klon M2, wurde als Modellsystem verwendet, und die Ergebnisse wurden mit anderen Methoden verglichen. Dieser Ansatz kann überall dort angewendet werden, wo ein kompetitiver Assay verfügbar ist oder entwickelt werden kann. Die Bestimmung einer Affinitätskonstante sollte zu den entscheidenden Parametern bei der Qualitätskontrolle von Antikörperprodukten und -assays gehören und in Arbeiten, die immunchemische Protokolle verwenden, obligatorisch sein.
KW - ELISA
KW - Competitive immunoassay
KW - IC50
KW - Test midpoint
KW - Point of inflection
KW - Equilibrium constant
KW - Dissociation constant
KW - Binding strength
KW - Antibody antigen complex
KW - Bio-interaction
KW - SPR
KW - Surface-plasmon resonance
KW - FLAG peptide
KW - Clone M2
KW - Antibody quality
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-605607
DO - https://doi.org/10.3390/mps7030049
SN - 2409-9279
VL - 7
IS - 3
SP - 1
EP - 11
PB - MDPI
CY - Basel
AN - OPUS4-60560
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scholl, Juliane
A1 - Scharpmann, Philippa
A1 - Bagheri, Abbas
A1 - Lisec, Jan
A1 - Meiers, Emelie
A1 - Jaeger, Carsten
A1 - Leonhardt, Robert
A1 - Haase, Hajo
A1 - Koch, Matthias
T1 - Beyond the lab: Real-world composition of commercial Li-ion battery electrolytes
N2 - This study presents a systematic, characterization of electrolytes from commercial lithium-ion batteries (LIB), encompassing 90 batteries from leading global manufacturers across diverse formats and application sectors. An integrated, complementary mass spectrometric workflow combining LC–MS/MS, GC–MS, and high-resolution MS was employed. To ensure robust structural annotation, molecular identifications were assigned confidence levels following Schymanski et al. (2014).
Across all formats, PF6− was confirmed as the dominant Li+ counterion, frequently coexisting with BF4−, PO2F2−, and bis(fluorosulfonyl)imide (FSI−), forming binary and ternary salt systems optimized for both conductivity and safety. Solvent systems revealed the widespread use of propylene carbonate (PC) combined with diverse carbonate mixtures, demonstrating trends in performance optimization specific to cell format. A variety of additives were identified, reflecting a clear shift towards multifunctional, synergistic additive packages and the gradual replacement of fluorinated species with environmentally safer alternatives. Cycling studies demonstrated that electrolyte degradation mechanisms are strongly influenced by electrode composition and additive chemistry, with oxidative degradation pathways dominating.
Together, these findings provide rare empirical insight into the evolving formulation strategies of electrolytes in commercial LIB, still employing classic carbonates and LiPF6, but highlighting a trend toward safer, more robust, and sustainable electrolyte architectures by using synergistic multifunctional systems.
KW - Mass Spectrometry
KW - Lithium-ion batteries
KW - Electrolyte degradation
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656254
DO - https://doi.org/10.1016/j.jpowsour.2026.239739
SN - 0378-7753
VL - 673
SP - 1
EP - 13
PB - Elsevier B.V.
AN - OPUS4-65625
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -