TY - CONF A1 - Affagard, Jean-Sebastien A1 - Gleim, Tobias A1 - Louis, Baptiste A1 - Quercetti, Thomas A1 - Ledroit, Frédéric A1 - Létang, Eric T1 - Towards a simplifiedmodel of the delayed impact: numerical and experimental outlook N2 - The IAEA Regulations for the Safe Transport of Radioactive Material No. SSR-6 require drop tests for demonstrating the ability of a package to withstand accident conditions of transport. In case a gap exists between the contents and the lid, it can result in a delayed impact of the content onto the lid system during a vertical drop test. The kinematic energy transmitted to the lid in such cases can be significant due to the stiffness of the impact, leading to high stresses in the bolts compared to a configuration without a gap. In the past, IRSN and BAM have individually investigated the modelling of the delayed impact phenomenon. BAM has examined the effects of the delayed impact phenomenon for spent fuel packages in a comparative analysis between experiments and simulations, which was presented at SMIRT 2013. Meanwhile, IRSN’s has developed a simple numerical tool that can quickly evaluate the influence of various parameters before considering a more complex finite element numerical calculation. This tool was presented at PATRAM 2022. In 2023, BAM and IRSN (now ASNR - French nuclear safety and radiation protection authority) decided to jointly pursue their study on the delayed impact phenomenon, incorporating damping effects, by developing new insights and techniques. To this end, a controlled and simplified set of experiments needs to be developed to calibrate and validate the simplified model. These experiments will record velocity, position of parts, strain and accelerations. The parameters and the configurations necessary for the development of the mock-up, as well as the placement and quantity of sensors, are determined through extensive pre-calculations using both complex finite element models and the simplified approach. A key challenge involves precisely controlling the drop of the mock-up to accurately replicate the theoretical contact and damping conditions. Advanced sensor technologies will be employed to acquire reliable and sufficient data. The tests are designed and conducted at BAM's TTS drop test facility in collaboration with ASNR. T2 - PATRAM 2025 CY - San Antonio, TX, USA DA - 27.07.2025 KW - Experiments KW - Impact KW - Drop Tower PY - 2025 SP - 1 EP - 11 CY - Institute of Nuclear Materials Management (INMM) AN - OPUS4-63870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Banerjee, Ayantika T1 - Enhancing Requirements for HLW Disposal Containers and Developing Transparent Safety Evaluation Concepts in Collaboration between BAM and BASE (Research Project KAnnE) N2 - The research project KAnnE aims to identify, concretize, and quantify requirements for high-level radioactive waste (HLW) disposal containers in Germany, considering potential types of host rock and repository concepts. The primary goal is to establish a transparent and comprehensible regulatory framework that accounts for different host rocks and operational phases, ensuring the safe long-term containment of radioactive waste. Given the current general legal formulation of these requirements, this study provides a systematic approach to defining them more precisely by integrating scientific and regulatory perspectives. An extensive review is conducted to gather relevant information about safety and design requirements for disposal containers in the respective types of host rock. The analysis considers host rock properties and conditions, operational repository conditions, and their impact on the container design, including key factors such as structural integrity, corrosion resistance, and shielding. Additionally, design specifications, boundary conditions, and expected loads (thermal, mechanical, radiological, chemical, and biological) are systematically reviewed, with quantified values provided where available. The findings support a comprehensive evaluation of both quantitative and qualitative container requirements concerning potential German host rock types, waste forms, and repository concepts. By establishing a clearer basis for defining these requirements, this project serves as a foundation for further refinement, with a more detailed structuring of requirements currently in progress. Such regulatory basis allows a more targeted approach to container development and ensures a transparent evaluation within the repository licensing procedure. Additionally, it supports decision making on the most favorable container design by considering repository conditions that provide the highest level of safety over one million years. This contribution explains the goals and concept of the research project KAnnE, presents its preliminary findings and conclusions, and provides an outlook on the final project phase. T2 - safeND conference 2025 CY - Berlin, Germany DA - 17.09.2025 KW - Radioactive waste KW - Final disposal KW - Waste container KW - Requirements KW - Regulation PY - 2025 AN - OPUS4-64990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beckmann, Jörg T1 - Photolytically and Thermally Initiated Destruction on the Stability of (Ultra)High Molecular Polyethylene N2 - THz and mid IR spectroscopy of high-molecular PE (HMW) and ultra high-molecular PE (UHMW) reveals modifications of the molecular structure. Characteristic absorption bands are changed if the two materials are exposed by γ-Co60 radiation up to 600 kGy and subsequently stored at an annealing temperature of 398 K until for 729 days. UHMW-PE and HMW-PE behave differently during the ageing process because of their molecular weight and inherent structure distinctions. The spectroscopic data offer characteristic absorption bands, which have been used to describe the complete ageing process in more detail. For instance, the integral absorption in the B1u THz-region can be used to describe quantitatively the reduction of crystallinity. The formation of trans vinylene unsaturation and the decay of vinyl during ageing can be observed in detail in the mid IR range. T2 - 9th International Workshop on Terahertz Technology and Applications CY - Kaiserslautern, Germany DA - 03.03.2020 KW - Degradation KW - MID IR Spectroscopy PY - 2020 AN - OPUS4-50555 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brunk, Gerd A1 - Herbrich, Uwe A1 - Weckner, Olaf A1 - Smith, Jay A1 - Rossi, John T1 - Geometrically non-linear large planar deformations of shear deformable beams: Derivation, approximation, and numerical validation using Finite Element analysis N2 - In this paper, we present derivations for the dynamic equations of motion of a shear deformable beam undergoing geometrically non-linear large deformations in a single plane. In the static case, these governing equations are given by six coupled, non-linear ordinary differential equations of first order which we present in the Lagrangian frame of reference and henceforth refer to as the Brunk–Herbrich–Weckner (BHW) beam theory. We confirm analytically that under pure bending an initially straight beam deforms into a circle, a known bench-mark solution. Next, we confirm numerically that our results agree well with the commercial Finite-Element code Abaqus for several example problems with increasing complexity, including the effect of axial preload as well as varying property domains along the beam. Abaqus is regarded as the state-of-the-art for non-linear structural analysis within the aerospace industry. Next, we show that the well-known Timoshenko–Ehrenfest and Euler–Bernoulli beam theory can be obtained from the general Brunk-Herbrich-Weckner beam theory in the limit of small deformations. Finally, we introduce the Iterative Projection Method which improves the results of the linearized Timoshenko–Ehrenfest beam theory without the computational cost associated with the fully non-linear analysis for all numerical test cases considered. KW - Linear and non-linear beam theory KW - Deformation problem KW - Euler–Bernoulli, Timoshenko–Ehrenfest and Brunk–Herbrich–Weckner beam KW - Iterative projection method KW - Finite Element analysis PY - 2025 DO - https://doi.org/https://doi.org/10.1177/10812865251342777 SN - 1081-2865 SP - 1 EP - 26 PB - Sage CY - Thousand Oaks, Calif. AN - OPUS4-64383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Caruso, Stefano A1 - Vlassopoulos, Efstathios A1 - Dagan, Ron A1 - Fiorito, Luca A1 - Herm, Michel A1 - Jansson, Peter A1 - Kromar, Marjan A1 - Király, Márton A1 - Leppanen, Jaakko A1 - Feria Marquez, Francisco A1 - Metz, Volker A1 - Papaioannou, Dimitrios A1 - Herranz, Luis Enrique A1 - Rochman, Dimitri A1 - Schillebeeckx, Peter A1 - Seidl, Marcus A1 - Hernandez Solis, Augusto A1 - Stankovskiy, Alexey A1 - Alvarez Velarde, Francisco A1 - Verwerft, Marc A1 - Rodriguez Villagra, Nieves A1 - Zencker, Uwe A1 - Žerovnik, Gasper T1 - EURAD - Work Package 8 - Deliverable 8.1 - State-of-the-art report N2 - A state-of-the-art (SOTA) review on characterisation of spent nuclear fuel (SNF) properties in terms of source term and inventory assessment (neutron, gamma-ray emission, decay heat, radionuclide inventory, elemental content) and in terms of out-of-core fuel performance (cladding performance and fuel integrity in view of the safety criteria for SNF interim storage, transport and canister packaging) using several numerical and experimental approaches and methodologies is presented. This SOTA report is a result of the spent fuel characterisation (SFC) work package as part of the European Joint Programme on Radioactive Waste Management (EURAD), which offers an overview of the status of knowledge in the field of SNF characterisation and assessment during the pre-disposal phase. The document aims to focus on the current safety-significant gaps and related challenges, providing a direct link to the goals of the mandated actors of EURAD. The report is expected to be used by all EURAD colleagues in their national programmes as a key resource for knowledge management programmes and to contribute to demonstrating and documenting the state-of-the-art. KW - Radioactive waste management KW - Spent fuel characterisation KW - Extended interim storage KW - Predisposal PY - 2022 UR - https://www.ejp-eurad.eu/publications/eurad-d81-state-art-report SP - 1 EP - 112 PB - Agence Nationale pour la Gestion des Déchets Radioactifs (ANDRA) CY - Châtenay-Malabry AN - OPUS4-59154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Droste, Bernhard A1 - Wolff, Dietmar A1 - Bevilacqua, A. A1 - Reiche, I. A1 - Harvey, J. A1 - Hirose, M. A1 - Kumano, Y. A1 - McConnell, P. A1 - Saegusa, T. A1 - Einziger, R. ED - González-Espartero, A. T1 - Methodology for a Safety Case of a Dual Purpose Cask for Storage and Transport of Spent Fuel N2 - Spent nuclear fuel which is generated in the operation of nuclear reactors needs to be safely managed following its removal from the reactor core. On-site power reactor storage pools were designed on the assumption that after a short period of time spent nuclear fuel would be removed for reprocessing and disposal or further storage elsewhere. The amount of highly radioactive spent fuel that needs to be stored over longer periods of time is growing and additional storage capacity is required. One of the widely used options for additional storage capacity is the use of casks for dry storage of spent fuel. Among various existing dry storage concepts, several Member States are utilizing a concept of dual purpose casks (DPCs). This publication provides practical advice on the structure and contents of a DPC integrated safety case with reference to existing IAEA requirements relevant to the licensing and use of transport and storage casks for spent fuel. KW - Dual Purpose Cask KW - Spent Fuel KW - Storage KW - Transport PY - 2020 UR - https://www.iaea.org/publications/10966/methodology-for-a-safety-case-of-a-dual-purpose-cask-for-storage-and-transport-of-spent-fuel SN - 978-92-0-131620-2 SN - 1011–4289 SP - 1 EP - 109 PB - IAEA Publishing Section CY - Vienna, Austria AN - OPUS4-51962 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin T1 - Heat Flux from Wood Filled Impact Limiter under Fire Conditions N2 - Packages for the transport of high-level radioactive material must withstand severe hypothetical accidents. Regulatory test conditions shall cover these severe accident conditions and consist of mechanical tests and a following thermal test. To withstand the mechanical tests heavy weight packages are often designed with impact limiters consisting of wood encapsulated in steel sheets. The thermal test is defined precisely in the IAEA-regulations as a 30 minute fully engulfing 800 °C fire. After the fire phase a pre-damaged impact limiter might continue burning or smouldering and influence the cask thermal behaviour with its energy release. The energy transferred from the impact limiter to the cask is of importance for the safety of transport packages. A full-scale fire test with an impact limiter of 2.3 m in diameter and filled with spruce wood was designed and performed. The impact limiter continued burning for 3 days. Energy transfer and temperature measurements were performed. T2 - 9th International Scientific Conference - wood & fire safety 2020 CY - Online meeting DA - 02.11.2020 KW - Fre KW - Smouldering KW - Wood PY - 2020 AN - OPUS4-51517 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin T1 - Outcomes of three large scale fire reference tests conducted in BAM fire test facility N2 - Packages for the transport of high-level radioactive material are designed to withstand severe accidents. Hypothetical severe accident conditions are defined in the IAEA Regulations for the Safe Transport of Radioactive Materials. One of these accident conditions is the thermal test, mainly consisting of a 30 minute fully engulfing 800°C pool fire or an equally severe fire test. The heat fluxes into the package depend substantially on the fire characteristics and the Surface temperature of the package. Fire tests can be performed at BAM on a propane gas fire test facility. In order to investigate the heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for multiple use. The package represented the outer geometry of a specific transport cask for radioactive waste. The fire reference package is a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 1500 mm and a diameter of 1050 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Three open-air fire tests were performed in the BAM propane gas fire test facility. The flames exposure time period varied slightly for the fire tests. The wind direction as well as the wind Speed were measured and changed between and during the tests. Test stand parameters such as wind shield location and propane gas volume flow were chosen constant for the three tests. The locally measured fire reference package steel sheet temperatures were used for the calculation of heat fluxes as function of time and surface temperature. The measured temperatures allowed further calculations. In a first approach effective fire characteristics of the propane gas fire, including the flame temperature, the fire convection coefficient and a Radiation exchange coefficient mathematically describing the determined average heat flux over the surface temperature were calculated. T2 - Pressure Vessels & Piping Virtual Conference 2020 CY - Online meeting DA - 03.08.2020 KW - Fire KW - Testing KW - Convection coefficient KW - Large scale fire testing KW - Propane gas fire test facility PY - 2020 AN - OPUS4-51194 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin T1 - Outcomes of Three Large-Scale Fire Reference Tests Conducted in Propane Gas Fire Test Facility N2 - Packages for the transport of high-level radioactive material are designed to withstand severe accidents. Hypothetical severe accident conditions are defined in the IAEA Regulations for the Safe Transport of Radioactive Materials. One of these accident conditions is the thermal test, mainly consisting of a 30 minute fully engulfing 800°C pool fire or an equally severe fire test. The heat fluxes into the package depend substantially on the fire characteristics and the surface temperature of the package. Fire tests can be performed at BAM on a propane gas fire test facility. In order to investigate the heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for multiple use. The package represented the outer geometry of a specific transport cask for radioactive waste. The fire reference package is a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 1500 mm and a diameter of 1050 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Three open-air fire tests were performed in the BAM propane gas fire test facility. The flames exposure time period varied slightly for the fire tests. The wind direction as well as the wind speed were measured and changed between and during the tests. Test stand parameters such as wind shield location and propane gas volume flow were chosen constant for the three tests. The locally measured fire reference package steel sheet temperatures were used for the calculation of heat fluxes as function of time and surface temperature. The measured temperatures allowed further calculations. In a first approach effective fire characteristics of the propane gas fire, including the flame temperature, the fire convection coefficient and a radiation exchange coefficient mathematically describing the determined average heat flux over the surface temperature were calculated. T2 - Abteilungskolloquium 3.3 CY - Online meeting DA - 03.12.2020 KW - Fire KW - Heat flux KW - Convection coefficient KW - Adiabatic surface temperature KW - IAEA PY - 2020 AN - OPUS4-51778 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin T1 - Fire reference package - Results of large-scale fire tests N2 - Packages for the transport of high-level radioactive material are designed to withstand severe accidents. Hypothetical severe accident conditions are defined in the IAEA Regulations for the Safe Transport of Radioactive Materials. One of these accident conditions is the thermal test, mainly consisting of a 30 minute fully engulfing 800°C pool fire or an equally severe fire test. The heat fluxes into the package depend substantially on the fire characteristics and the surface temperature of the package. Fire tests can be performed at BAM on a propane gas fire test facility. In order to investigate the heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for multiple use. The package represented the outer geometry of a specific transport cask for radioactive waste. The fire reference package is a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 1500 mm and a diameter of 1050 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Three open-air fire tests were performed in the BAM propane gas fire test facility. The flames exposure time period varied slightly for the fire tests. The wind direction as well as the wind speed were measured and changed between and during the tests. Test stand parameters such as wind shield location and propane gas volume flow were chosen constant for the three tests. The locally measured fire reference package steel sheet temperatures were used for the calculation of heat fluxes as function of time and surface temperature. The measured temperatures allowed further calculations. In a first approach effective fire characteristics of the propane gas fire, including the flame temperature, the fire convection coefficient and a radiation exchange coefficient mathematically describing the determined average heat flux over the surface temperature were calculated. T2 - IRSN-BAM Symposium - Safety of Transport and Storage Packages CY - Online meeting DA - 19.11.2020 KW - Fire reference KW - Calorimetric test KW - Propane KW - Heat flux KW - Propane gas fire test facility PY - 2020 AN - OPUS4-51686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -