TY - CONF A1 - Wachtendorf, Volker T1 - Grundsätzliches zur Frage der "UV-Beständigkeit" bzw. der "Lichtbeständigkeit" polymerer Werkstoffe T2 - 42. Jahrestagung der Gesellschaft für Umweltsimulation, GUS. "Umwelteinflüsse erfassen, simulieren, bewerten" CY - Stutensee, Germany DA - 2013-03-20 PY - 2013 AN - OPUS4-27914 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Beanspruchung von HDPE-Verpackungsproben durch UV-Strahlung und Salpetersäure T2 - 43. Jahrestagung der Gesellschaft für Umweltsimulation CY - Stutensee, Germany DA - 2014-03-26 PY - 2014 AN - OPUS4-31041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter T1 - Referenzmaterialien für Bewitterungsprüfungen T2 - 32. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal, Germany DA - 2003-03-26 PY - 2003 AN - OPUS4-4078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter T1 - Reference Materials for Weathering Tests T2 - 1st European Weathering Symposium EWS CY - Prague, Czech Republic DA - 2003-09-25 PY - 2003 AN - OPUS4-4077 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - (UV-)Strahlenklima und Strahlungsmessung T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19653 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Ulrich T1 - the Influence of Mildew growth on Automotive Coatings on the Results of Outdoor Weathering T2 - 1st European Weathering Republik CY - Karlsruhe, Germany DA - 2003-09-25 PY - 2003 AN - OPUS4-4070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Weathering Reference Materials - Monitors for Weathering Exposure T2 - 3rd Symposium on Service Life Prediction CY - Sedona, AZ, USA DA - 2004-02-02 PY - 2004 AN - OPUS4-4756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilberg, Alec T1 - Untersuchung und Kompensation des Size-of-Source Effektes der Thermografie zur Prozessüberwachung in der metallischen additiven Fertigung N2 - Der Einsatz der Thermografie zur Prozessüberwachung in der additiven Fertigung von Metallen ist aktueller Schwerpunkt diverser Forschungsprojekte. Prozessbedingt können im Bauteil Risse, innere Spannungen und sonstige interne Fehlerstellen auftreten, deren Entstehung durch wichtige thermische Größen wie Phasenumwandlungstemperaturen, Abkühlgeschwindigkeiten und thermische Gradienten beeinflusst wird. Um diese Einflüsse zu untersuchen, ist eine möglichst genaue Messung dieser Parameter notwendig. Neben den häufig betrachteten Einflüssen des Emissionsgrades, der Umgebungstemperatur und der atmosphärischen Absorption besteht ein weiterer Einfluss, hervorgerufen durch das optische System. Der Kameraaufbau, das verwendete Objektiv und Teilchen im Strahlengang können zur Beugung, Streuung, Reflektion und Aberration der elektromagnetischen Strahlung führen, wodurch die thermografische Messung verfälscht wird. Dies ist ein in der Pyrometrie intensiv erforschter Effekt und wird, aufgrund der Abhängigkeit zur betrachteten Objektgröße, als Size-of-Source Effekt bezeichnet und in dieser Arbeit untersucht. Im Laser-Pulver-Auftragsschweißen (LPA) wird mittels eines Lasers auf einer Substratplatte ein Schmelzbad erzeugt und durch Einblasen von Metallpulver die lagenweise Fertigung von komplexen Bauteilen ermöglicht. Dabei können, je nach geometrischer Auflösung der Kamera, Größen des Schmelzbades im Bereich weniger Prozente der gesamten Bildfläche auftreten. Aus durchgeführten Referenzmessungen an Schwarzkörperstrahlern kann in der gleichen Größenordnung eine Abweichung der Strahlungswerte im zweistelligen Prozentbereich festgestellt werden. Daher ist in diesem Anwendungsfall der dadurch verursachte Fehler nicht zu vernachlässigen, weshalb auf Basis der Referenzmessungen eine Methode entwickelt wurde, um in Abhängigkeit der Größe des Objektes einen Faktor zur Kompensation des Size-of-Source Effektes zu berechnen. In diesem Beitrag werden erste Ergebnisse dieser im Rahmen des DFG Projektes QT-LPA (Nr. 516965606) durchgeführten Arbeiten präsentiert. T2 - DGZfP Jahrestagung 2025 CY - Berlin, Germany DA - 26.05.2025 KW - SSE KW - Thermografie KW - Size of source Effect PY - 2025 AN - OPUS4-65651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilberg, Alec T1 - Multispektrale Thermografie zur quantitativen Temperaturbestimmung im DED-LB/M Prozess N2 - Additive Fertigungsverfahren bieten konstruktive Freiheiten, die mit konventionellen Herstellungsverfahren nur schwer zu realisieren sind. Durch die Möglichkeit hochkomplexe Bauteile aus Metall fertigen zu können, stellt die additive Fertigung in vielen Industriezweigen eine vielversprechende Fertigungsalternative da. Allerdings treten prozessbedingt hohe Temperaturgradienten und schnelle Phasenumwandlungen auf, die maßgeblich entscheidend für die Mikrostruktur und die Bildung von internen Spannungen, Rissen und weiteren Defekten sind. Diese Effekte wirken sich direkt auf die mechanischen Eigenschaften der gefertigten Bauteile aus und verdeutlichen die Notwendigkeit einer zuverlässigen Bauteilprüfung. Dabei sind nachgelagerte Verfahren in der Regel zeit- und kostenaufwändig, weshalb die Anwendung von in-situ Verfahren zur Qualitätssicherung im Fokus diverser Forschungsprojekte steht. Die Thermografie erlaubt die orts- und zeitaufgelöste Messung der im Prozess auftretenden Temperaturfelder. Allerdings müssen die tatsächlich gemessenen digitalen Sensorwerte mittels geeigneter radiometrischer Modelle in Temperaturen umgewandelt werden. Da diese Modelle in der Regel auf Basis von Messungen an Schwarzkörperstrahlern kalibriert werden, kann dieses Vorgehen nur zufriedenstellende Werte liefern, sofern der Emissionsgrad des zu messenden Objektes bekannt ist. Während in statischen Anwendungen häufig ein konstanter Materialreferenzwert hinreichend befriedigende Ergebnisse liefert, ist man in der additiven Fertigung mit dem Problem konfrontiert, dass der Emissionsgrad lokal in kürzester Zeit starke Änderungen durchläuft. Beeinflusst wird dieser Effekt unter anderem durch Temperatur, Phasenzustand und Oberflächenzustand. Das hier vorgestellte Verfahren nutzt Referenzmessungen des Emissionsgrades in Abhängigkeit von Temperatur, Winkel und Phasenzustand, um in einem DED-LB/M-Prozess (auch Laser-Pulver-Auftragschweißen, LPA) sowohl den Emissionsgrad als auch die tatsächliche Temperatur orts- und zeitaufgelöst zu bestimmen. Grundlage hierfür sind multispektrale thermografische Messungen, bei denen (quasi-) synchron in acht unterschiedlichen Wellenlängenbereichen gemessen wird. In diesem Beitrag werden Ergebnisse der im Rahmen des DFG-Projektes QT-LPA (Nr. 516965606) durchgeführten Arbeiten präsentiert. T2 - Thermo25 CY - Garching bei München, Germany DA - 11.11.2025 KW - Thermografie KW - TES KW - Multispektral KW - DED-LB/M KW - Laserpulverauftragschweißen PY - 2025 AN - OPUS4-65652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ziegler, Mathias A1 - Strobach, L. T1 - Infrarotreflektographie und Blitzthermographie zur Sichtbarmachung von historischen Farbschichten am Flugzeug Bücker Bü 181 Bestmann N2 - Die Geschichte eines Flugzeuges ist häufig von unterschiedlichen Nutzungsphasen geprägt. Zum Beispiel ist der Wechsel des Eigentümers eines Flugzeuges häufig mit umfassenden Veränderungen der Farbgebung und Kennzeichnung verbunden. Wenn ein Flugzeug in die Sammlung eines Museums aufgenommen wird, zeigt es entweder den letzten Einsatzzustand oder andere zu späteren Zeiten durchgeführte Reparaturen auf seiner Oberfläche. Oft befinden sich unterhalb dieser letzten äußeren Schicht, ältere Spuren der Nutzung. Um diese verdeckt liegenden Lackierungen sichtbar zu machen, können die Verfahren der Infrarotreflektographie und der aktiven Thermographie eingesetzt werden. Die Infrarotreflektographie wird häufig in der Gemälderestaurierung eingesetzt, um zum Beispiel Vorzeichnungen sichtbar zu machen. Die aus der industriellen zerstörungsfreien Prüfung bekannten Verfahren der aktiven Thermographie fanden bisher überwiegend im Bereich der Bauwerksuntersuchungen Anwendung. Erste Ergebnisse zu Farbuntersuchungen an historischen Flugzeugen mit den beiden Verfahren fanden am Deutschen Museum München in Zusammenarbeit mit der TU-München statt. Ein Projekt der HTW-Berlin mit der Bundesanstalt für Materialforschung und –prüfung (BAM) und dem Militärhistorischen Museum Flugplatz Berlin-Gatow greift diese Anwendungsidee auf und vergleicht beide Verfahren. Am Beispiel des Flugzeuges Bücker Bü 181 Bestmann können die Möglichkeiten, Grenzen und Potentiale der Technologien zum gegenwärtigen Entwicklungsstand verdeutlicht werden. T2 - Material Truth CY - Magdeburg, Germany DA - 04.03.2026 KW - Aktive Thermographie KW - Flugzeuggeschichte KW - Zerstörungsfreie Prüfung (ZfP) KW - Infrarotreflektographie PY - 2026 AN - OPUS4-65658 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Quantitative Auswertemöglichkeiten bei der spektralen Bestrahlung – Berechnung des Wirkungsspektrums N2 - Für die Bewertung des Wellenlängeneinflusses auf die Alterungsvorgänge bei der Bestrahlung UV- oder lichtempfindlicher Materialien kann die Methode der spektralen Bestrahlung angewendet werden. Im Prinzip wird dabei das linear dispergierte Spektrum einer Strahlenquelle mit kontinuierlichem Spektrum (z.B. Xe-Lampe) auf eine Probenoberfläche abgebildet, so dass Ort einer Materialänderung und Wellenlänge der Bestrahlung einander zugeordnet werden können. Nachfolgende lokal-auflösende Analysemethoden ermitteln eine Eigenschaftsänderung an einem spezifischen Ort der Probe, aus dem sich dann die Bestrahlungswellenlänge ergibt. Der verwendete Aufbau wird beschrieben. Es wird an einem ausgewählten Beispiel gezeigt, wie durch geeignete Anbindung eines Messsystems zur Bestimmung der spektralen Bestrahlungsstärke und ortsaufgelöste Messungen der Eigenschaftsänderungen eine quantitative Auswertung realisiert werden kann. Der Einfluss nichtlinearer Alterungsverläufe wird diskutiert. Grenzen der Methode werden aufgezeigt und Erweiterungsmöglichkeiten dargestellt. T2 - 46. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 22.03.2017 KW - UV-Bestrahlung PY - 2017 AN - OPUS4-42577 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ekici, Nilsah A1 - Sobol, Oded T1 - SHIMMER Database for Hydrogen Integration in European Gas Grids N2 - The integration of hydrogen into existing natural gas infrastructure is an important pathway for achieving the European Union’s climate neutrality goals. However, hydrogen blending in gas networks raises technical challenges related to material compatibility, operational safety, and the lack of harmonized assessment methodologies across Europe. These challenges are addressed within the Safe Hydrogen Injection Modelling and Management for European Gas Network Resilience (SHIMMER) project, funded by the Clean Hydrogen Partnership under the Horizon Europe programme. A key outcome of the project is the development of an openly accessible database designed to support the assessment of hydrogen readiness in European gas networks and to facilitate knowledge sharing. The database compiles infrastructure data provided by project partners, including several European transmission and distribution system operators. It contains detailed information on gas network components such as pipelines, valves, fittings, gaskets, and compressors. In addition, a new category has been introduced focusing on the hydrogen compatibility of gas grid components and materials. This section provides structured information linking infrastructure components with material types and their hydrogen compatibility, enabling more systematic evaluation of hydrogen injection scenarios. By organizing heterogeneous datasets into a harmonized and user-friendly structure, the SHIMMER database supports research, best-practice development, and the safe integration of hydrogen into existing European gas infrastructure. T2 - EHEC 2026 CY - Seville, Spain DA - 11.03.2026 KW - Database KW - Gas Grid KW - Hydrogen KW - Low-carbon KW - Pipeline Steel PY - 2026 AN - OPUS4-65683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Veränderung der Kratzbeständigkeit und der Reflow-Fähigkeit von Automobil-Klarlacken durch Bewitterung T2 - DFO Qualitätstage 2005, "Moderne Verfahren zur Oberflächencharakterisierung" der Deutschen Forschungsgesellschaft für Oberflächenbehandlung e. V. CY - Berlin, Germany DA - 2005-10-25 PY - 2005 AN - OPUS4-12505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Grundsätzliches zur Verkürzung von Bewitterungstests durch künstliche Bewitterung T2 - 35. Jahrestagung der Gesellschaft für Umweltsimulation (GUS), "Umwelteinflüsse erfassen, simulieren, bewerten" am Fraunhofer Institut für Chemische Technologie (ICT) CY - Pfinztal, Germany DA - 2006-03-22 PY - 2006 AN - OPUS4-12266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Entwicklung künstlicher Bewitterungstests für Lacke und Beschichtungen T2 - GfKORR-Seminar "Korrelation von Labortests mit Praxisbedingungen im Automobilbereich" der Gesellschaft für Korrosionsschutz e. V. CY - Frankfurt am Main, Germany DA - 2006-02-15 PY - 2006 AN - OPUS4-12111 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Der Einfluss von Feuchte und Nässe bei der Bewitterung T2 - 36. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Karlsruhe, Germany DA - 2007-03-14 PY - 2007 AN - OPUS4-14651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Grenzflächenklima an bestrahlten Oberflächen, Strahlungsmessung T2 - "Bewitterung von Kunststoffen und Lacken", Seminar der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2007-05-10 PY - 2007 AN - OPUS4-14813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Spectral sensivity of polymeric degradation - spectral efficiency of stabilizers T2 - European Coating Conference CY - Nuremberg, Germany DA - 2007-05-07 PY - 2007 AN - OPUS4-14812 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Spektrale Empfindlichkeit der Photoalterung von Lacken und Kunststoffen T2 - Fachtagung "Bewitterung von Kunststoffen und Lacken in der Automobilindustrie" des Süddeutschen Kunststoff-Zentrums CY - Würzburg, Germany DA - 2007-02-07 PY - 2007 AN - OPUS4-15904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Notwendigkeit der Erfassung klimatischer Einflüsse auf Transportbehälter aus Kunststoff T2 - CEEES Kongress 2007, "Umweltsimulation in der Produktentwicklung" CY - Nuremberg, Germany DA - 2007-05-22 PY - 2007 AN - OPUS4-15905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Zum (UV-)Strahlenklima der Erde T2 - "Bewitterung von Kunststoffen und Lacken", Seminar der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2007-05-10 PY - 2007 AN - OPUS4-14814 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Improved evaluation of activation spectra determined by the filter technique T2 - 3rd European Weathering Symposium CY - Kraków, Poland DA - 2007-09-12 PY - 2007 AN - OPUS4-15906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Artificial weathering including acidic deposition T2 - 3rd European Weathering Symposium CY - Kraków, Poland DA - 2007-09-12 PY - 2007 AN - OPUS4-15907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wawrzyn, Eliza T1 - Flame retardancy in Pc/Silicone rubber blends using BDP and additional additives T2 - 20th Annual Conference on Recent Advances in Flame Retardancy of Polymeric Materials CY - Stamford, CT, USA DA - 2009-06-01 PY - 2009 AN - OPUS4-19592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Accelerated Weathering Test for Plastics and Coatings that are exposed to Acidic Precipitation T2 - 7th International Symposium on Weatherability CY - Yokohama, Japan DA - 2008-10-23 PY - 2008 AN - OPUS4-18909 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Aussagekraft von Korrelationskoeffizienten T2 - 38. Jahrestagung der GUS CY - Stutensee, Germany DA - 2009-03-18 PY - 2009 AN - OPUS4-19151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Spektrale Empfindlichkeit und Aktivierungsspektren von Polymeren T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Alterung von Polymeren durch Witterungsbeanspruchung T2 - 25. Darmstädter Kunststoff-Kolloquium, "Schadensanalytik heute - Methoden und Anwendungen" CY - Darmstadt, Germany DA - 2009-09-10 PY - 2009 AN - OPUS4-20573 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Influence of Weathering on the Stability of Flame Retardancy in Polymeric Materials for Outdoor Use T2 - 4th European Weathering Symposium (Poster 26) CY - Budapest, Hungary DA - 2009-09-16 PY - 2009 AN - OPUS4-19918 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wawrzyn, Eliza T1 - FLAME RETARDANCY IN PC/SILICONE RUBBER/BDP/PTFE BLEND T2 - FRPM'09 12th European Meeting on Fire Retardant Polymers CY - Poznan, Poland DA - 2009-08-31 PY - 2009 AN - OPUS4-20016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Grenzflächenklimate an bestrahlten Oberflächen, Messung der Oberflächentemperatur T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Genormte Prüfverfahren T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Alterungsvorgänge durch Bewitterung bei Beschichtungen und deren Untersuchung und Prüfung T2 - 42. SAH-Tagung 2010, "Holzoberflächen in der Fassadengestaltung", Schweizerische Arbeitsgemeinschaft für Holzforschung CY - Weinfelden, Switzerland DA - 2010-10-26 PY - 2010 AN - OPUS4-22587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Zusammenhang von molekularen Alterungsvorgängen und beobachtbaren Eigenschaftsänderungen bei der Bewitterung von Polymeren T2 - 39. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Stutensee, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-21013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Polypropylene Life Time Estimation by Developing Dose Response Functions with Respect to Irradiation and Temperature - ViPQuali Project T2 - 8th International Symposium on Weatherability CY - Tokyo, Japan DA - 2010-10-14 PY - 2010 AN - OPUS4-22142 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Training Course "Effects of Moisture in the Course of Weathering" T2 - 4th European weathering symposium CY - Budapest, Hungary DA - 2009-09-16 PY - 2009 AN - OPUS4-20639 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Alterungsvorgänge bei Kunststoffbehältern T2 - BAM-AK Prüfstellen CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-22143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wawrzyn, Eliza T1 - Are novel aryl phospates competitors for BDP in halogen-free flame retarded PC/ABS/PTFE blend? T2 - Polymers for Advanced Technologies 2011 CY - Lodz, Poland DA - 2011-10-02 PY - 2011 AN - OPUS4-24439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Arrhenius-Ansatz zur Lebensdauervorhersage aus künstlichen Bewitterungsversuchen T2 - 41. Jahrestagung der GUS 2012 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Stutensee, Germany DA - 2012-03-14 PY - 2012 AN - OPUS4-25627 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - CarbonLifeCycle - Weathering Induced Degradation of Nanoparticle-Functionalised Polymers T2 - 5th European Weathering Symposium (EWS) CY - Lisbon, Portugal DA - 2011-09-21 PY - 2011 AN - OPUS4-24424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Development of al leaching test to estimate emissions from synthetic sports grounds into soil and ground water under weathering exposure T2 - [Conference] "Service Life Prediction of Polymeric Materials: Vision for the Future" CY - Monterey, CA, USA DA - 2013-03-03 PY - 2013 AN - OPUS4-27915 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - PP Numerical Photoageing Simulation by Dose Response Functions with Respect to Irradiation and Temperature - ViPQuali Project T2 - Service Life Prediction of Polymeric Materials: Vision for the Future CY - Monterey, CA, USA DA - 2013-03-03 PY - 2013 AN - OPUS4-28355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Surface Temperatures of Irradiated Test Specimens - Decisive Physical Quantities and a Largely Unsolved Problem T2 - 6th European Weathering Symposium EWS CY - Bratislava, Slovakia DA - 2013-09-11 PY - 2013 AN - OPUS4-31044 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - A New Weathering Device for Plastic Containers with Parallel impact of Dangerous Liquids T2 - 27th IAPRI Symposium on Packaging CY - Valencia, Spanien DA - 2015-06-06 PY - 2015 AN - OPUS4-33436 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Messung der effektiven UV-Bestrahlung bei der Bewitterung von Polymeren N2 - Bei der Bestrahlung und Bewitterung von polymeren Werkstoffen wird die Degradation durch eine Absorption von Strahlung initiiert und meistens durch weitere Klimagrößen, wie z.B. Wärme, Feuchte und atmosphärische Gase beeinflusst. Die Messung einer effektiven Bestrahlungsstärke und ihre zeitliche Integration sind deshalb von großer Bedeutung. Photochemische Prozesse werden beim Sehen oder allgemeiner bei Farbstoffen schon durch sichtbare (VIS) Strahlung, dagegen bei der Erythembildung der Haut und der Photodegradation von Polymeren erst durch die energiereicheren Photonen der ultravioletten (UV) Strahlung initiiert. Die spektrale Empfindlichkeit des Auges und die Erythembildung sind im VIS- bzw. UV-Bereich sehr stark wellenlängenabhängig, was durch die Angabe der mit der spektralen Hellempfindlichkeit V() des Auges bewerteten VIS-Strahlung in Lux (lx) bzw. die mit der Erythem-Wirkfunktion bewertete UV Strahlung als dimensionsloser UV-Index berücksichtigt wird. Spektrale Empfindlichkeiten. Die Photodegradation von Polymeren ist im UV-Bereich ebenfalls stark wellenlängenab-hängig, was bisher nicht berücksichtigt wurde. Seit Mitte der 70er Jahre, als die lx- bzw lxh- Messung bei der Strahlungsbeanspruchung langsam durch die Ermittlung der radiometrischen UV-Bestrahlungsstärke bzw. der UV-Bestrahlung im gesamten UV-Bereich abgelöst wurde, gab es hier bei der Bewitterungsprüfung keine weiteren Fortschritte auf dem Gebiet der Charakterisierung der Strahlungsbeanspruchung im UV-Bereich. Seit Jahren liegen zahlreiche Ergebnisse über die spektrale Empfindlichkeit von Photo-degradationsprozessen vor, die zeigen, dass die spektrale Empfindlichkeit im Bereich der Globalstrahlung bei ca. 300 nm, am größten ist und im langwelligen UV-Bereich bei ca. 400 nm gegen Null geht. Die Messungen der radiometrischen Größen UV-Gesamt-bestrahlungsstärke und UV-Gesamtbestrahlung erfasst deshalb über weite Wellen-längenbereiche Strahlungsanteile, die für die Photodegradation bedeutungslos sind und mittelt über potenziell bedeutsame Änderungen im kurzwelligen UV-Bereich hinweg. Es wird das Konzept eines neuen UV-Radiometers vorgestellt, dessen spektrale Empfindlichkeit einer mittleren spektralen Empfindlichkeit der Photodegradation von Polymeren entspricht. Die effektive UV-Bestrahlungsstärke und UV-Bestrahlung kann dadurch wesentlich genauer erfasst werden. T2 - 48. Jahrestagung der GUS 2019 CY - Stutensee, Germany DA - 27.03.2019 KW - UV-Bestrahlungsstärke PY - 2019 AN - OPUS4-49712 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stelzner, Ludwig T1 - Konstruktiver Brandschutz: Abplatzverhalten von Beton, Innovativer Versuchsaufbau und klinkereffiziente Zemente N2 - Bauteile aus Beton besitzen in der Regel ohne zusätzliche Schutzmaßnahmen aufgrund ihrer großen Masse, der Nichtbrennbarkeit des Baustoffs sowie der geringen Wärmeleitfähigkeit einen hohen Feuerwiderstand. Jedoch kann der Querschnitt durch Abplatzungen im Brandfall reduziert und die Bewehrung freigelegt werden. Dies kann zum frühzeitigen Verlust der Standsicherheit und in der Folge insbesondere bei Infrastrukturbauwerken zu massiven ökonomischen Folgeschäden führen. Der Beitrag präsentiert aktuelle Forschungsarbeiten der BAM zur Analyse des Abplatzverhaltens von Beton. Auf Basis experimenteller Untersuchungen zum Einfluss der Prüfkörpergröße auf das Abplatzverhalten wird eine weiterentwickelte Prüfmethodik vorgestellt. Diese ermöglicht es, die Abplatzneigung von Betonrezepturen mittels kleinformatiger Prüfkörper zu analysieren. Abschließend wird unter Anwendung dieser Methode der Einfluss verschiedener Zementarten auf das Abplatzverhalten eines normalfesten Betons untersucht. T2 - STUVA-Tagung 2025 – Internationales Forum für Tunnel und Infrastruktur CY - Hamburg, Germany DA - 25.11.2025 KW - Explosionsartiges Abplatzen KW - Brandfall KW - Klinkereffiziente Zemente PY - 2025 AN - OPUS4-65686 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Lebensdauerabschätzung für Polypropylen durch Dosis-Wirkungsfunktionen bezüglich Bestrahlungsstärke und Temperatur (ViPQuali-Projekt) T2 - 40. Jahrestagung der GUS CY - Stutensee, Germany DA - 2011-03-28 PY - 2011 AN - OPUS4-23542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Combined impact of UV and chemical flufids on HDPE packaging material T2 - 25th IAPRI Symposium on Packaging CY - Berlin, Germany DA - 2011-05-16 PY - 2011 AN - OPUS4-23795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - UV-LEDs - a new tool to determine the spectral response T2 - 5th European Weathering Symposium CY - Lisbon, Portugal DA - 2011-09-21 PY - 2011 AN - OPUS4-24417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Evaluation of Outdoor Exposures by means of Exposure Response Functions N2 - Outdoor exposure tests are a common tool to evaluate the weathering resistance of a polymeric material or component. However, they have only a limited validity, mainly due to the limited reproducibility of the weather as well as of the bad adaptability to other exposure sites. Typically, an outdoor exposure is characterized by the measured radiant exposure; sometimes averaged temperature data are added. These can be – separately – related to long-term annual means, to get an idea on the severity of the exposure. However, as for polymeric ageing, irradiance and temperature act simultaneously, such severity of an outdoor exposure could be better described by a computed property change of a similar material, which is calculated from the hourly irradiance and temperature values on the base of established exposure response functions. In this way, various outdoor exposures are evaluated. For several exposure sites, annual deviations of the ageing amount are related to annual mean values, to evaluate the weathering reproducibility at the exposure site. Additionally, correlations to relevant weather parameters are illuminated. Also some specific exposure conditions, such as tilt angle, are tested. Compared to the use of weathering reference materials, this procedure unfavourably depends on the availability of a suited control as well as on the quality of the established exposure response function. In contrast, it enables a later exposure evaluation, on the base of documented weather data, if for instance no reference material was exposed. T2 - 8th European Weathering Symposium CY - Vienna, Austria DA - 20.09.2017 KW - Photodegradation KW - Weathering KW - Service life prediction PY - 2017 AN - OPUS4-42576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Spezifische Witterungsempfindlichkeiten verschiedener Kunststoffe im Außenbereich T2 - SKZ Fachtagung "Bewitterung von Kunststoffen und Lacken" CY - Würzburg, Germany DA - 2009-03-04 PY - 2009 AN - OPUS4-19591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Einfluss der Bewitterung auf die Kratzbeständigkeit von Automobilllackierungen T2 - Fachtagung Bewitterung und Alterung von Kunststoffen in der Automobilindustrie Süddeutsches Kunstoff-Zentrum CY - Würzburg, Germany DA - 2003-02-19 PY - 2003 AN - OPUS4-4031 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Ermittlung der Beanspruchung bei Bewitterungsversuchen - Referenzmaterialien T2 - 33. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal, Germany DA - 2004-03-17 PY - 2004 AN - OPUS4-4757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - The Action of Outdoor Weathering on the Scrath Resistance and Reflow Ability of Automotive Clearcoats T2 - 7th Nürnberg Congress CY - Nuremberg, Germany DA - 2003-04-08 PY - 2003 AN - OPUS4-4033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - The Action of Weathering on the Scrath Behaviour of Automotive Clearcoats T2 - 1st European Weathering Symposium EWS CY - Prague, Czech Republic DA - 2003-09-25 PY - 2003 AN - OPUS4-4034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina T1 - Mould growth on automotive coatings influencing the results of outdoor weathering T2 - Smart and Functional Coatings CY - Turin, Italy DA - 2013-09-26 PY - 2013 AN - OPUS4-29249 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Weathering Resistance of Hardcoats for Polycarbonate T2 - 8th Nürnberg Congress "Creative Advances in Coatings Technology" CY - Nuremberg, Germany DA - 2005-04-25 PY - 2005 AN - OPUS4-7351 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Strahlungsmessung beim Bestrahlen und Bewittern T2 - Seminar "Natürliches und künstliches Bewittern polymerer Werkstoffe" der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2005-04-28 PY - 2005 AN - OPUS4-7935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Zum (UV-) Strahlenklima der Erde T2 - Seminar "Natürliches und künstliches Bewittern polymerer Werkstoffe" der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2005-04-28 PY - 2005 AN - OPUS4-7937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - UV-sensitive Weathering Reference Materials T2 - 2nd European Weathering Symposium CY - Gothenburg, Sweden DA - 2005-06-15 PY - 2005 AN - OPUS4-7936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Grundsätzliches zur Lebensdauervorhersage in der Bewitterung T2 - Jahrestagung der Gesellschaft für Umweltsimulation CY - Pfinztal, Germany DA - 2005-03-03 PY - 2005 AN - OPUS4-5884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Reflow Ability of Automotive Coatings T2 - XXVII FATIPEC Kongress CY - Aix-en-Provence, France DA - 2004-04-19 PY - 2004 AN - OPUS4-4758 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - McSAS for SAS analysis: Usage, Benefits and Potential Pitfalls N2 - An introductory lecture for users at the Diamond Light Source, on how to use the McSAS software to analyze their data. T2 - Small Angle Scattering Training School CY - Diamond Light Source, Didcot, United Kingdom DA - 04.06.2018 KW - Small-angle scattering KW - Software KW - Analysis PY - 2018 AN - OPUS4-46517 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Testing of HDPE containers for dangerous goods after outdoor exposure N2 - Focus areas of BAM as well as testing results of HDPE containers for dangerous goods after outdoor exposure of were presented. T2 - 70th CEEES Meeting CY - Hørsholm, Danmark DA - 13.11.2018 KW - HDPE KW - Dangerous goods KW - Chemical resistance PY - 2018 AN - OPUS4-47032 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - A New Irradiation Device for Medium Scale Plastic Products T2 - 7th European Weathering Symposium CY - Napolli, Italy DA - 2015-09-16 PY - 2015 AN - OPUS4-34541 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter A1 - Geburtig, Anja T1 - Thermal Radiation and its Interaction with Polymeric Materials T2 - 2nd European Weathering Symposium CY - Gothenburg, Sweden DA - 2005-06-15 PY - 2005 AN - OPUS4-10445 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Suarez Ocano, Patricia T1 - Influence of heat-treatment-induced microstructural evolution on the Low Cycle Fatigue behavior of 316L stainless steel fabricated by Laser Powder Bed Fusion N2 - Additive manufacturing, particularly the laser powder bed fusion (PBF-LB/M) process, has gained significant attention in recent years due to its ability to produce complex geometries with enhanced mechanical properties. Among the various materials used, 316L stainless steel is highly favored for cyclically loaded components due to its exceptional mechanical strength, high-temperature performance, and corrosion resistance, making it widely applicable across various industries. 316L SS fabricated by PBF-LB/M (PBF-LB/M/316L) exhibits a unique hierarchical microstructure, with high density of low-angle grain boundaries (LAGBs), nano-dispersed silicates, chemical micro-segregations, and solidification-induced cellular structures. Particularly, the submicron-sized cellular features enriched with chromium (Cr) and molybdenum (Mo), along with high dislocation densities, contribute to a superior strength-ductility balance compared to conventionally manufactured 316L SS. The dispersed silicate particles act also as a strengthening phase, impeding dislocation movement and enhancing plastic deformation resistance. This study explores the effect of heat treatments on the low-cycle fatigue (LCF) behavior of PBF-LB/M/316L at room temperature (RT) and 600 °C. First, three heat treatment conditions were applied to the as-built material: 450 °C for 4 hours (HT450/4), 800 °C for 3 hours (HT800/3), and 900 °C for 1 hour (HT900/1) to investigate their influence on microstructural evolution. Microstructural analysis revealed that the HT450/4 condition preserved the cellular structure with high dislocation density, while the HT800/3 condition showed partial dissolution of cells together with reduction in segregated elements along the cell walls and a reduced dislocation density. The HT900/1 condition resulted in complete segregation and cellular structure dissolution with comparable dislocation density to HT800/3 while maintaining the crystallographic texture and grain morphology. Intermetallic χ phase was mostly observed at the grain boundaries in HT800/3, but not in HT900/1. Fully reversed LCF tests were conducted under strain-controlled conditions with a strain amplitude of 0.8 %. Tests were interrupted at specific intervals to analyze the interaction between hierarchical microstructural features and deformation mechanisms in the three heat-treated conditions. Due to the pronounced dislocation cell structures and elemental segregation, the microstructure of the HT450/4 condition significantly impact deformation and damage mechanisms during cyclic loading, which in turn, differ from the conventional produced counterparts. The results provide insights into the relationship between microstructural features and fatigue performance, highlighting key deformation and failure mechanisms under cyclic loading. T2 - FEMS 2025 EUROMAT 18th European Congress and Exhibition on Advanced Materials and Processes CY - Granada, Spain DA - 14.09.2025 KW - Additive manufacturing KW - 316L stainless steel KW - Heat treatments KW - Low Cycle Fatigue KW - Microstructure PY - 2025 AN - OPUS4-64238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agudo Jácome, Leonardo T1 - Low-Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room and High Temperature N2 - The nickel-base superalloy Inconel 718 (IN718) is one of the most commonly used Ni-based superalloys for high temperature structural applications for its remarkable strength, as well as creep, fatigue, and corrosion resistance up to 650 °C. While IN718 has traditionally been employed as cast or wrought material, it is difficult to machine because of its high strength and toughness. The additive manufacturing of IN718 components made by metal AM has thus gained extensive attention to produce expensive near-net shaped components of high-temperature alloys such as IN718, for it saves material and costs in processing and machining steps. Among all metal additive manufacturing (AM) technologies, laser powder bed fusion (PBF-LB/M) is the most widespread, IN718 being one of the most common alloys produced with it. However, high cooling rates associated to the PBF-LB/M process, hinders the primary strengthening phases γ’’ and γ’ to form, as these cooling rates induce a dislocation cellular substructure, at which walls primary Laves phases bind segregating Nb, Ti and Mo. Many of the therefore needed heat-treatment strategies can then promote Laves-phase transformation into the stable δ phase along the cell and grain boundaries. Laves and δ phases, as well as grain-boundary primary carbides may have adverse effects on mechanical properties. The mostly needle-shaped δ phase was namely found to have a detrimental effect on creep rupture life while no direct effect on LCF fatigue life was evident. In this work room- and high-temperature (650 °C) low-cycle fatigue behavior of PBF-LB/M IN718 is investigated in the four-step heat-treated state and compared to wrought IN718. The microstructure of both materials is characterized across length scales via microscopy methods. The fatigue life at room temperature of the PBF-LB/M IN718 material is slightly lower than that for the wrought material, which is reversed at 650 °C. The cyclic stress response for both materials is marked by cyclic softening that is more pronounced at higher test temperatures. Multiple secondary cracks form at high strain amplitudes, at both room and high temperatures. High testing temperatures enhance specially crack formation at the transitions of regions between elongated grains and columns of stacked grains with ripple patterns in the PBF-LB/M material. Additional to this behavior, pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients. T2 - EUROMAT 2025 CY - Granada, Spain DA - 14.09.2025 KW - Additive manufacturing KW - Low-cycle fatigue KW - Microstructural characterization KW - Ni-base superalloy PY - 2025 AN - OPUS4-64354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Battistella, Beatrice T1 - Plasma-Based Analytical Approaches for the Investigation of Li-ion Battery Degradation N2 - The research conducted at the Federal Institute for Material Research and Testing (BAM) focuses on key challenges of the energy transition, spanning hydrogen technologies, electrical energy storage, and renewable energy systems. In the field of energy storage, our primary areas of interest include the safety of electrical energy storage systems, sustainable energy materials, and advanced battery diagnostics. One of our central objectives is to deepen our understanding of the processes contributing to lithium-ion cell degradation, an essential step toward improving next-generation systems and meeting the rapidly growing demand for lithium-ion battery technology. The complexity of these systems, which comprise organic and inorganic compounds in multiple aggregation states, presents significant analytical challenges. To address these challenges, we are developing novel analytical methods to further expand our insight into battery degradation mechanisms. Using GD-MS for depth-resolved lithium isotope analysis, we have recently established a correlation between lithium isotope fractionation and the growth of electrode–electrolyte interphases at electrode surfaces. In addition, we are developing GD-OES and LIBS methods for depth-resolved and lateral fluorine analysis, respectively, of lithium-ion battery electrodes to monitor electrolyte and additive degradation. These approaches might also provide valuable analytical tools for assessing the homogeneity of fluorinated active materials. T2 - Berkeley Lab - Prof. Dr. Zorba group seminar (Energy Technologies Area) CY - Berkeley, CA, USA DA - 27.02.2026 KW - Li-ion Batteries KW - Li Isotopes KW - Diagnostic on batteries PY - 2026 AN - OPUS4-65695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Battistella, Beatrice T1 - Plasma-Based Analytical Approaches for the Investigation of Li-ion Battery Degradation N2 - The research conducted at the Federal Institute for Material Research and Testing (BAM) focuses on key challenges of the energy transition, spanning hydrogen technologies, electrical energy storage, and renewable energy systems. In the field of energy storage, our primary areas of interest include the safety of electrical energy storage systems, sustainable energy materials, and advanced battery diagnostics. One of our central objectives is to deepen our understanding of the processes contributing to lithium-ion cell degradation, an essential step toward improving next-generation systems and meeting the rapidly growing demand for lithium-ion battery technology. The complexity of these systems, which comprise organic and inorganic compounds in multiple aggregation states, presents significant analytical challenges. To address these challenges, we are developing novel analytical methods to further expand our insight into battery degradation mechanisms. Using GD-MS for depth-resolved lithium isotope analysis, we have recently established a correlation between lithium isotope fractionation and the growth of electrode–electrolyte interphases at electrode surfaces. In addition, we are developing GD-OES and LIBS methods for depth-resolved and lateral fluorine analysis, respectively, of lithium-ion battery electrodes to monitor electrolyte and additive degradation. These approaches might also provide valuable analytical tools for assessing the homogeneity of fluorinated active materials. T2 - Applied Spectra Inc. CY - Sacramento, CA, USA DA - 05.03.2026 KW - Lithium-Ion Battery PY - 2026 AN - OPUS4-65696 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Battistella, Beatrice T1 - Plasma-Based Analytical Approaches for the Investigation of Li-ion Battery Degradation N2 - The research conducted at the Federal Institute for Material Research and Testing (BAM) focuses on key challenges of the energy transition, spanning hydrogen technologies, electrical energy storage, and renewable energy systems. In the field of energy storage, our primary areas of interest include the safety of electrical energy storage systems, sustainable energy materials, and advanced battery diagnostics. One of our central objectives is to deepen our understanding of the processes contributing to lithium-ion cell degradation, an essential step toward improving next-generation systems and meeting the rapidly growing demand for lithium-ion battery technology. The complexity of these systems, which comprise organic and inorganic compounds in multiple aggregation states, presents significant analytical challenges. To address these challenges, we are developing novel analytical methods to further expand our insight into battery degradation mechanisms. Using GD-MS for depth-resolved lithium isotope analysis, we have recently established a correlation between lithium isotope fractionation and the growth of electrode–electrolyte interphases at electrode surfaces. In addition, we are developing GD-OES and LIBS methods for depth-resolved and lateral fluorine analysis, respectively, of lithium-ion battery electrodes to monitor electrolyte and additive degradation. These approaches might also provide valuable analytical tools for assessing the homogeneity of fluorinated active materials. T2 - California Institute of Technology (Caltech) CY - Pasadena, CA, USA DA - 06.03.2026 KW - Lithium-Ion Battery KW - Li Isotopes KW - Diagnostic on batteries KW - LA-ICP-MS KW - GD-MS PY - 2026 AN - OPUS4-65697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Battistella, Beatrice T1 - Lithium Isotope Fractionation inLithium-Ion Batteries:a Benchmark for Performance and Aging? N2 - Since their introduction, Lithium-ion batteries (LIBs) have revolutionized the world of portable electronics and sustainable mobility[1]. LIBs currently play a pivotal role across several sectors, thanks to their long cycle life, fast-charging capabilities, unmatched energy densities, and a broad operating temperature range. Given the increasing demand of this technology[2,3], challenges including safety concerns, limited resource availability, and environmental impact need to be addressed. To improve the next-generation systems, understanding the cell degradation pathways is crucial. However, the complexity of these systems, comprising organic and inorganic compounds in various aggregation states, poses challenges to studying the involved degradation processes. Inspired by geochemical studies, which displayed lithium isotope fractionation in dynamic natural systems, attributed to the high mass difference (ca. 16%) between the heavier (ca. 7Li, 92.5%) and the lighter isotope (ca. 6Li, 7.5%)[4], this work investigates weather a difference in Li isotope distribution within battery components can serve as a diagnostic and/or predictive tool for determining the remaining useful lifetime (RUL) of batteries[5]. Initial observations of Li isotope variation during battery aging were made in commercial cells. This was followed by systematic studies based on lab-scale coin-cells fabricated with different cathode materials[6]. While multicollector ICP-MS (MC-ICP-MS) investigation of each cell component enabled quantification of Li isotope fractionation in new and aged batteries with a 0.2 ‰ precision, glow discharge mass spectrometric (GD-MS) analysis provided spatially resolved information on Li isotopic distribution variation upon cells aging. The results display a meaningful correlation between post-mortem chemical analysis and electrochemical cells’ performance, highlighting the potential of Li isotope distribution in the electrodes as both a benchmark for battery degradation and a valuable indicator for assessing battery RUL. T2 - 2026 United States Winter Conference on Plasma Spectrochemistry CY - Tucson, AZ, USA DA - 10.01.2026 KW - Lithium-Ion Battery KW - Glow Discharge Mass Spectrometry KW - Li isotopes PY - 2026 AN - OPUS4-65694 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herter, Sven-Oliver T1 - Quantifizierung von Mutterkornalkaloiden in Lebensmitteln unter Verwendung neu entwickelter stabil isotopenmarkierter interner Standards N2 - Mutterkornalkaloide sind Mykotoxine, die von Pilzen der Gattung Claviceps produziert werden und häufig in Roggen- und Weizenprodukten vorkommen. Aufgrund ihrer toxikologischen Relevanz hat die Europäische Union im Jahr 2022 erstmals Grenzwerte für diese Alkaloide in Lebensmitteln eingeführt. Eine zuverlässige Quantifizierung ist essenziell für die Überwachung der Lebensmittelsicherheit. Allerdings stellte der bisherige Mangel an stabilen isotopenmarkierten (SIL - stable isotopically labeled) Standards eine wesentliche Herausforderung für die Entwicklung präziser Analysemethoden mittels HPLC-MS/MS dar. Um diese Lücke zu schließen, wurden erstmals alle zwölf prioritären Mutterkornalkaloide über einen einheitlichen Semisyntheseansatz als 13CD3-markierte Analoga synthetisiert und als interne Standards für die massenspektrometrische Analyse eingesetzt. Die Quantifizierung erfolgte mittels HPLC-MS/MS in verschiedenen Lebensmittelmatrizes, darunter Brot, Roggen- und Weizenmehl sowie Kleie. Zur Evaluierung der SIL-Standards wurden etablierte Methoden wie externe Kalibrierung und Standardaddition herangezogen. Die Studienergebnisse zeigen, dass der Einsatz von SIL-Standards die Genauigkeit und Präzision der Mutterkornalkaloid-Quantifizierung signifikant verbessert. Dies ist insbesondere auf die Korrektur von Matrixeffekten, Extraktions- und Signalschwankungen während der massenspektrometrischen Analyse zurückzuführen. Die neu synthetisierten 13CD3 markierten Mutterkornalkaloide stellen daher ein wertvolles Werkzeug zur Verbesserung der Lebensmittelsicherheit dar, da sie zuverlässigere und reproduzierbare Messergebnisse ermöglichen. Darüber hinaus leisten diese Ergebnisse einen wichtigen Beitrag zur Weiterentwicklung analytischer Methoden zur Überwachung von Mutterkornalkaloiden und damit zur Sicherstellung der Lebensmittelqualität. T2 - 53. Deutsche Lebensmittelchemietage CY - Halle (Saale), Germany DA - 22.09.2025 KW - HPLC-MS/MS KW - Interner Standard KW - Qualitätssicherung PY - 2025 AN - OPUS4-64546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Ettaouaje, Omar T1 - Fiber optic sensors for SHM of solid bridges - BAM activities in work packages 2–5 N2 - We report on wire break detection and traffic load monitoring using embedded, distributed fiber optic sensors as part of a concept for structural health monitoring of solid bridges. Fiber optic measurements provide real-time data for identifying loads, structural responses, and damages. The development includes methods for data evaluation and information extraction from large DFOS datasets, contributing to the digital transformation of bridge infrastructure. T2 - FOSsure Jahrestreffen CY - Dresden, Germany DA - 18.03.2026 KW - Distributed fibre optic sensor (DFOS) KW - SHM KW - Bridge monitoring KW - Distributed acoustic sensing PY - 2026 AN - OPUS4-65704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Joester, Maike T1 - Combination of optical micro-spectroscopy and scattering of biological samples in the presence of inorganic materials T2 - 8th European NESY Winter-School & Symposium on Neutrons and Synchrotron Radiation CY - Planneralm, Austria DA - 2013-03-10 PY - 2013 AN - OPUS4-27799 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gnutzmann, Tanja T1 - Fast crystallization of organic glass form T2 - SPP 1415 Symposium "Kristalline Nichtgleichgewichtsphasen - Theorie und Experiment" CY - Darmstadt, Germany DA - 2012-09-19 PY - 2012 AN - OPUS4-26928 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Batzdorf, Lisa T1 - Reorganization of a Zn Oxalate Bipyridine Structure at high Temperatures T2 - Fourth Joint BER II and BESSY II Users Meeting CY - Berlin, Germany DA - 2012-12-12 PY - 2012 N1 - Geburtsname von Batzdorf, Lisa: Tröbs, L. - Birth name of Batzdorf, Lisa: Tröbs, L. AN - OPUS4-27478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gnutzmann, Tanja T1 - Crystallization studies utilzing levitated droplets T2 - Fourth Joint BER II and BESSY Users Meeting CY - Berlin, Germany DA - 2012-12-12 PY - 2012 N1 - Geburtsname von Batzdorf, Lisa: Tröbs, L. - Birth name of Batzdorf, Lisa: Tröbs, L. AN - OPUS4-27486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bienert, Ralf T1 - Characterization of Nanoparticles T2 - Fachtagung Nano-Additive CY - Berlin, Germany DA - 2012-11-19 PY - 2012 AN - OPUS4-27883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Joester, Maike T1 - Combination of optical micro-spectroscopy and scattering of biological samples in the presence of inorganic materials T2 - International School of Crystallography, 46th Course: The Future of Dynamic Structural Science CY - Erice, Italy DA - 2013-05-31 PY - 2013 AN - OPUS4-28647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Emmerling, Franziska T1 - Selective Growth of Trigonal and Hexagonal Shaped Silver Micro-Nano-Platelets at the Water/Oil Interface T2 - JungChemikerForum CY - Berlin, Germany DA - 2013-03-06 PY - 2013 AN - OPUS4-28285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leng, Jing T1 - Structure-Property Relationships of Nanocomposites based on Polylactide and Layered Double Hydroxides T2 - DPG Frühjahrstagung CY - Regensburg, Germany DA - 2013-03-10 PY - 2013 AN - OPUS4-28761 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leng, Jing T1 - Structure-Property Relationships of Nanocomposites based on Polylactide and Layered Double Hydroxides T2 - DPG Frühjahrstagung CY - Regensburg, Germany DA - 2013-03-10 PY - 2013 AN - OPUS4-28764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Batzdorf, Lisa T1 - Strukturelle Charakterisierung von Cokristallen T2 - Anakon 2013 CY - Essen, Germany DA - 2013-03-04 PY - 2013 N1 - Geburtsname von Batzdorf, Lisa: Tröbs, L. - Birth name of Batzdorf, Lisa: Tröbs, L. AN - OPUS4-28287 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leng, Jing T1 - Structure-Property Relationship of Nanocomposites based on Epoxy and layered Double Hydroxides T2 - DPG-Frühjahrstagung der Sektion Kondensierte Materie CY - Dresden, Germany DA - 2014-03-30 PY - 2014 AN - OPUS4-30562 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Batzdorf, Lisa T1 - Synthese- und Kristallisationsuntersuchungen mittels insitu Synchrotron XRD T2 - Workshop "Zeit und temperaturaufgelöste Röntgenbeugung" CY - Pfinztal, Germany DA - 2013-11-14 PY - 2013 N1 - Geburtsname von Batzdorf, Lisa: Tröbs, L. - Birth name of Batzdorf, Lisa: Tröbs, L. AN - OPUS4-29895 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Menzel, Michael T1 - Advantages of dual wavelenght detection for size determination of nanoparticles with analytical centrifugation T2 - Swiss Nanoconvention 2014 CY - Brugg, Switzerland DA - 2014-05-21 PY - 2014 AN - OPUS4-30729 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Menzel, Michael T1 - The new nano silver reference material BAM-N001 T2 - Swiss Nanoconvention 2014 CY - Brugg, Switzerland DA - 2014-05-21 PY - 2014 AN - OPUS4-30728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nguyen, Thi Yen T1 - In situ characterization of crystallization processes T2 - BESSY Usermeeting 2013 CY - Berlin, Germany DA - 2013-12-05 PY - 2013 AN - OPUS4-30022 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Emmerling, Franziska T1 - In situ studies of mechanochemistry: a force of synthesis N2 - Recent results in the field of mechanisms and kinetics of mechanochemical reactions. T2 - Seminar GFZ Potsdam CY - Postdam, Germany DA - 28.03.2018 KW - In situ KW - XRD KW - Rietveld PY - 2018 AN - OPUS4-46992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Detektion von Kunststoffen mittels TED-GC-MS N2 - Vortrag zur Funktionsweise der TED-GC-MS für die Analyse von Mikroplastik in Umweltproben T2 - Arbeitsgespräch der Ressortforschungseinrichtungen CY - Berlin, Germany DA - 26.11.2018 KW - Mikroplastik KW - TED-GC-MS PY - 2018 AN - OPUS4-47184 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kabelitz, Anke T1 - In-situ characterisation of nucleation, growth, crystallisation and dissolution of nanoscaled iron oxides N2 - We present the synthesis of four mesoporous templated iron oxides: Ferrihydrite, Hematite, Maghemite, Magnetite/Maghemite and the influence of water on the crystallization mechanism and the kinetics. The absence of water stabilize the ferrihydrite structure. By monitoring the dissolution in situ by using a QCMB and ex situ microscopy we got details in the dissolution mechanism of ferrihydrite. T2 - Final Meeting of the CRC 1109 & Edith Flanigen Award Ceremony 2018 CY - Berlin, Germany DA - 10.10.2018 KW - Mesoporous KW - Iron oxide KW - Mechanism PY - 2018 AN - OPUS4-47010 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yusenko, Kirill T1 - BAMline 2.0 – further technical developments for a broader multipurpose hard X-ray beamline at BESSY II N2 - We show further development of our beamline in the contexst of further itermational collaboration. T2 - PACC and AfSC CY - Accra, Ghana DA - 28.01.2019 KW - Synchrotron radiation PY - 2019 AN - OPUS4-47317 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Emmerling, Franziska T1 - New insights in mechanochemical processes using real-time In situ investigations N2 - Mechanochemistry is a fast and efficient method applicable for the synthesis of new organic[1], metal-organic[2], and inorganic[3] compounds. The direct monitoring of milling reactions is still challenging. The underlying reaction mechanisms remain often unclear. In the last years, have established a tandem in situ approach for investigating mechanochemical reactions using time-resolved in situ XRD coupled with Raman spectroscopy.[4] Here, we present an in situ coupling of synchrotron XRD, Raman spectroscopy, and thermography allowing the observation of mechanochemical reactions in real time.[5] Information on the crystalline, molecular, and temperature state of the materials during grinding could be collected. The chemical composition of the reaction mixture was found to be directly correlated with changes in the temperature profile of the reaction. Furthermore, the presented setup allows the detection of crystalline, amorphous, eutectic as well as liquid intermediates. The resulting deeper kinetic and thermodynamic understanding of milling processes is the key for future optimization of mechanochemical syntheses. T2 - 5th International Conference "Fundamental Bases of Mechanochemical Technologies" CY - Novosibirsk, Russia DA - 25.06.2018 KW - Mechanochemistry KW - XRD KW - Kinetic KW - Coordination polymers PY - 2018 AN - OPUS4-46994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akhmetova, Irina T1 - Mechanochemical synthesis of metal phosphonates N2 - The exploration of metal phosphonates chemistry has gained great interest during the last decades, because of their structural diversity. Transition metal phosphonates are promising candidates for an application as electrocatalysts in oxygen evolution reactions (OER). Here, we present the in situ investigation of mechanochemical syntheses of different manganese phosphonates by synchrotron X-ray diffraction. Nitrilotri(methylenephosphonic acid) and N,N-Bis(phosphonomethyl)glycine were chosen as ligands. The liquid-assisted milling process can be divided into three steps, including an amorphous stage. One of the products has not been obtained by classical solution chemistry before. These metal phosphonates and/or their derivatives are considered to be active in electrochemical energy conversion. The verification of their applicability is one of the topics of our resent research. T2 - Fundamental Bases of Mechanochemical Technologies CY - Novosibirsk, Russia DA - 25.06.2018 KW - Metal phosphonates KW - Mechanochemistry KW - PXRD KW - Thermography PY - 2018 AN - OPUS4-46996 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akhmetova, Irina T1 - In situ investigation of milling reactions and structure determination of the products using X-ray diffraction N2 - Mechanochemistry is a versatile approach for green and fast synthesis of pure substances. By milling the reactants, various organic, inorganic, and metal-organic compounds can be obtained in high yields. Although mechanochemistry is widely used, the underlying mechanisms are not fully understood making mechanochemical reactions difficult to predict. Metal phosphonates are metal-organic compounds accessible by grinding. Because of their structural diversity, the exploration of the chemistry of metal phosphonates has gained considerable interest during the last decades. Transition metal phosphonates are promising candidates for an application as electrocatalysts in oxygen evolution reaction (OER). Here, we present the in situ investigation of the mechanochemical synthesis of a manganese(II)-phosphonate by synchrotron X-ray diffraction and thermography. The product has not been obtained by classical solution chemistry before and its crystal structure was determined from PXRD data. The milling process can be divided into different steps, with the product crystallization corresponding with the highest temperature rise. The activity of this metal phosphonate towards OER was measured and is presented here. T2 - International School of Crystallography - 52nd Course: Quantum Crystallography CY - Erice, Italy DA - 1.06.2018 KW - Metal phosphonates KW - Mechanochemistry KW - PXRD KW - OER KW - Thermography PY - 2018 AN - OPUS4-46998 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kabelitz, Anke T1 - A02: In situ WAXS studies on the crystallization of Al 13 keggin clusters in water N2 - Polynuclear aluminium species (Al13 keggin cluster) find application in different areas like water purification [1], contaminant transport [2], and as pilling clays with high specific surface areas[3], due to their strong binding ability to aggregates and high positive charge. In the present contribution, we report on the in situ investigation of the Al13 sulfate synthesis by synchrotron wide-angle X-ray scattering (WAXS). Al13 cluster were crystallized by precipitating hydrolyzed aluminum solutions by the addition of sodium sulfate. The measurements were performed using a custom-made acoustic levitator as sample holder. The study provides information about the intermediates during the crystallization process. From the data, a mechanism was derived indicating the influence of the crystallization process. T2 - Final Meeting of the CRC 1109 & Edith Flanigen Award Ceremony 2018 CY - Berlin, Germany DA - 10.10.2018 KW - Crystallization KW - WAXS KW - Keggin Cluster PY - 2018 AN - OPUS4-47005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - Laboratory x-ray scattering instruments as agile test-beds towards holistic experimentation N2 - Laboratory sources offer a unique advantage compared to synchrotron sources, largely in terms of freedom of operation. This freedom from user obligations, technology and software stacks and legacy decisions make the laboratory a very flexible place to develop and explore new ideas. The unparalleled availability furthermore allows for iterative improvement of instrumentation, sample environments and measurement methodologies to maximise the quality of the data obtained. This talk will highlight the use of the laboratory as an agile test-bed and development space, by giving examples of some complete and incomplete investigations undertaken in our laboratory over the last years. Furthermore, it will introduce the concept of holistic experimentation, where the laboratory provides broad-ranging support for materials science investigations. This means that we assist in the experimental preparation, perform the measurements, correction and analysis, and follow-up with assistance in interpretation of our analyses in light of the results from other techniques applied to the investigation. T2 - Invited talk at Diamond Light Source CY - Didcot, UK DA - 22.05.2024 KW - X-ray scattering KW - Methodology development KW - Laboratory management KW - Holistic experimentation KW - Laboratory automation KW - Nanostructural analysis PY - 2024 AN - OPUS4-60582 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - Glimpses of the Future : Oh my god it’s full of metadata! N2 - In this talk, the importance of metadata is underscored by real-world examples. Metadata is essential to alleviating the reproducibility crises in science. This imples that a wide range of metadata must be collected, with a heavy emphasis on the automated collection of such metadata. This must subsequently be organized in an intelligible, archival structure, when possible with units and uncertainties. Such metadata can aid in improving the usage efficiency of instrumentation, as is demonstrated on the MOUSE instrument. This metadata can now be used to connect the various aspects of the holistic experimental procedure to gain better insights on the materials structure. A second example shows the extraction and organization of such metadata from an automated materials development platform, collected during the synthesis of 1200 samples. These metadata from the synthesis can then be linked to the results from the analysis of these samples, to find direct correlations between the synthesis parameters and the final structure of the materials. T2 - Helmholtz Incubator Summer Academy - Next Level Data Science CY - Online meeting DA - 18.09.2023 KW - Metadata KW - Lab automation KW - Data provenance KW - High-throughput KW - Correlative analysis KW - MOUSE KW - X-ray scattering KW - Robotics PY - 2023 AN - OPUS4-58463 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thünemann, Andreas T1 - Developtment of Nanoplastics Reference Materials at BAM N2 - Engineered particles are essential for sustainable innovation and modern industrial applications, but their reliable, number‑based characterisation remains a major challenge. Regulatory frameworks in healthcare, personal care (EU 745/2017, 749/2017, 1223/2009), and environmental monitoring—such as the EU Drinking Water Directive 21840/2020—demand robust particle measurements across complex matrices. Yet standardised methods currently exist only for simple particle systems, leaving significant gaps for technologically relevant materials and for micro‑ and nanoplastics as emerging pollutants. These challenges are amplified by the lack of well‑defined input parameters, particularly density and refractive index, which are critical for many analytical and modelling approaches. This talk highlights BAM’s work on developing nanoplastics reference materials to support validated, traceable, and harmonised measurement methods. I will outline strategies for producing stable, well‑characterised polymeric nanoparticles, establishing accurate material parameters, and integrating these reference materials into interlaboratory and standardisation activities. These efforts provide the metrological foundation urgently needed for regulatory testing, environmental monitoring, and industry innovation. T2 - ConcenSus Virtual Webinar on Reference Materials supporting characterization of nanomaterials: Current status and future trends CY - Online meeting DA - 17.03.2026 KW - Nanoplastics KW - Nanoparticle PY - 2026 AN - OPUS4-65717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Rudolf T1 - Enhancing wastewater surveillance through anthropogenic markers N2 - Since the global COVID-19 pandemic, there has been an increased focus on systematically monitoring pathogens in raw wastewater - a practice known as wastewater-based epidemiology (WBE). This approach, aligned with the One Health concept, the revised EU Urban Wastewater Treatment Directive (2024), and Germany’s amended Infection Protection Act (2023), aims to generate health data independently of individual testing and reporting behaviors through wastewater surveillance. – Germany’s AMELAG project implemented wastewater surveillance at approximately 170 treatment plants, with biweekly sampling. This infrastructure - comprising treatment plants, logistics, laboratories, and health authorities - also provided us samples that were analyzed for their levels of a series of anthropogenic markers. These markers improve data accuracy by accounting for site-specific variations in wastewater composition and flow rates, such as those caused by stormwater runoff. Beyond epidemiology, wastewater surveillance provides valuable insights into the spread of antimicrobial resistance (AMR), drug consumption, industrial discharges, and the efficiency of wastewater treatment plants in eliminating indicator substances. To assess these factors, cost-effective, high-throughput methods such as ELISA (Enzyme-Linked Immunosorbent Assay) offer a practical solution. This study examines ELISA’s application in detecting diclofenac, carbamazepine, and bisphenol A in wastewater samples from various locations. T2 - Pacifichem 2025 CY - Honolulu, HI, USA DA - 15.12.2025 KW - Antibodies KW - Immunoassay KW - Pharmaceuticals PY - 2025 AN - OPUS4-65720 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -