TY - CONF A1 - Alić Stolar, Jasna T1 - Harnessing mechanochemistry to tackle PFAS pollution N2 - We are currently facing one of the most serious environmental crises in human history – the widespread pollution caused by PFAS. PFAS stands for per- and polyfluoroalkyl substances, which are toxic, persistent, highly mobile, and bioaccumulative compounds, often referred to as 'forever chemicals'. For over 70 years, they have been used to make products resistant to water, heat, and stains, but the cost of damaging ecosystems and harming human health was revealed far too late. As of 2023, there were more than 23,000 confirmed PFAS contamination sites in Europe alone, with at least an equal number of presumptive contamination sites due to historical and current industrial activities.1 Public concern has pushed regulatory bodies to restrict the production of the most common PFAS, but with over 10,000 PFAS compounds and existing contamination, the problem remains largely unresolved. State-of-the-art remediation strategies rely on energy-intensive incineration, which releases greenhouse gases and smaller, volatile PFAS derivatives.2 Here, we present a fast, simple, and sustainable method for the complete degradation of PFAS, leveraging mechanochemistry3 to break down the persistent carbon-fluorine bonds. Our findings indicate that liquid-assisted grinding conditions accelerate the degradation of perfluorooctanoic acid compared to neat grinding conditions, resulting in a significant reduction in energy consumption. Moreover, the fluoride released during the process binds to inorganic additives, allowing fluorine recovery as crystalline salts and preventing the formation of secondary toxic waste. The method has strong potential for scaling up and offers a green and viable solution for real-world application in PFAS decontamination. T2 - Tag der Chemie CY - Berlin, Germany DA - 03.07.2025 KW - Mechanochemistry KW - Forever chemicals KW - Sustainability PY - 2025 AN - OPUS4-63972 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wurzler, Nina T1 - Chemical interaction mechanisms of metal reducing bacteria on steel surfaces N2 - Metal reducing bacteria (MRB) are able to utilize various materials such as iron, uranium and manganese as well as many organic compounds as electron acceptors. This process leads to the conversion of Fe(III) containing passive film species to soluble Fe(II) oxides and hydroxides. The reduction process triggers the acceleration of general and local corrosion processes. Electron transfer mechanisms are not yet fully understood. In literature it has been controversially discussed to which extend secreted electron shuttles contribute to the extracellular electron transfer (EET). To understand the chemical and electrochemical interaction mechanisms of MRB with steel surfaces this project combines a variety of in-situ techniques. The changes in oxide chemistry on Fe/steel surfaces in the presence of biomolecules and MRB are under investigation using a newly designed electrochemical cell for in situ XANES (x-ray absorption near edge structure) spectroscopy. Electrochemical quartz crystal microbalance (eQCM) studies support the spectroscopic investigations to gain information about the kinetics of attachment processes and changes in biofilm viscosity. The biofilm structure and composition as well as cell viability are investigated by complementary ex situ spectroscopic and microscopic analysis. Combining spectroscopic techniques and eQCM data with electrochemical measurements, biological processes and the resulting degradation of steel surfaces can be observed in a non-destructive manner. Selecting model systems and a defined biological medium allows the determination of individual effects of diverse surface and environmental parameters. The fundamental understanding of bacterial attachment mechanisms and initial steps of biofilm formation will contribute to the development of new antifouling strategies. T2 - 12th International Conference on Biology and Synchrotron Radiation CY - San Francisco, CA, USA DA - 21.08.2016 KW - Microbially influenced corrosion (MIC) KW - Metal reducing bacteria KW - XANES KW - Electrochemistry PY - 2016 AN - OPUS4-37238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Emmerling, Franziska T1 - In-situ investigations of mechanochemical reactions N2 - Mechanochemistry is a fast and efficient method applicable for the synthesis of new organic[1], metal-organic[2], and inorganic[3] compounds. The direct monitoring of milling reactions is still challenging. The underlying reaction mechanisms remain often unclear. In the last years, have established a tandem in situ approach for investigating mechanochemical reactions using time-resolved in situ XRD coupled with Raman spectroscopy.[4] Here, we present an in situ coupling of synchrotron XRD, Raman spectroscopy, and thermography allowing the observation of mechanochemical reactions in real time.[5] Information on the crystalline, molecular, and temperature state of the materials during grinding could be collected. The chemical composition of the reaction mixture was found to be directly correlated with changes in the temperature profile of the reaction. Furthermore, the presented setup allows the detection of crystalline, amorphous, eutectic as well as liquid intermediates. The resulting deeper kinetic and thermodynamic understanding of milling processes is the key for future optimization of mechanochemical syntheses. T2 - ACS Conference Boston CY - Boston, USA DA - 19.08.2018 KW - Mechanochemistry KW - In situ KW - Kinetic PY - 2018 AN - OPUS4-46989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bremser, Wolfram T1 - The nano silver reference material BAM-N001 T2 - 1st International Conference on Reference Materials CY - Yekaterinburg, Russia DA - 2013-09-10 PY - 2013 AN - OPUS4-29035 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klimakow, Maria T1 - Untersuchung des Kristallisationsvorganges und Bestimmung der spezifischen Oberfläche von Cu3 (BTC)2 T2 - ANAKON 2009 CY - Berlin, Germany DA - 2009-03-17 PY - 2009 AN - OPUS4-18714 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Batzdorf, Lisa T1 - Synthese und Charakterisierung von Cokristallen T2 - 7. Interdisziplinäres Doktorandenseminar CY - Berlin, Germany DA - 2013-02-24 PY - 2013 N1 - Geburtsname von Batzdorf, Lisa: Tröbs, L. - Birth name of Batzdorf, Lisa: Tröbs, L. AN - OPUS4-28286 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Axel T1 - Representative sampling of roadside soil and determination of tire wear contents by TED-GC/MS N2 - The presentation describes microplastic findings from tyre wear near roads. Both the sampling and the analysis are presented. T2 - Mikroplastik Workshop der Hochschule Zittau CY - Online meeting DA - 25.11.2021 KW - Mikroplastik KW - Reifenabrieb KW - TED-GC/MS KW - Probennahme PY - 2021 AN - OPUS4-53831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stroh, Julia T1 - High resolution in situ monitoring of the initial cement hydration influenced by organic admixtures N2 - Numerous admixtures are used in the building practice to customize the properties of the cement paste during application. The influences of admixtures on the course of cement hydration and formation of hydrate phases have to be considered. Polycarboxylate ether (PCE) based polymeric superplasticizers (SPs) are known to retard the setting of the cement paste. The extent of the retardation differs depending on the molecular structure of the SP. Additionally, the presence of a stabilizing agent (SA) in the cement paste has a retarding side effect on the setting. The initial cement hydration processes and the detailed mechanisms of the retardation influenced by PCEs, as well as their interactions with particular SAs, are insufficiently understood. Up to now, only the results of phenomenological studies were taken into account to describe this retardation process. A detailed structure analysis monitoring the change of the phase composition during the hydration was never applied. Both SP and SA affect the adsorption of the sulphate ions on the clinker particles, causing changes in the formation of ettringite during the initial hydration, and are therefore a crucial part of the setting process itself. Here, the initial hydration of cement influenced by the interaction of SP and SA was monitored in situ by synchrotron X-ray diffraction. The high time resolution of the measurements allowed a continuous detection of the hydrates formed. The hydration was followed from the starting point of water addition and for couple of hours afterwards. The hydration of the levitated cement pellets containing starch as SA was initialized by adding aqueous solutions of different commercial SPs. Changes in the ettringite formation were detected in comparison to the reference hydration of pure cement. T2 - Early Age Concrete: From the Research Lab to the Construction Site CY - Tomsk, Russia DA - 02.06.2015 KW - Portland cement KW - Initial hydration KW - Superplasticizer KW - Stabilizer KW - Synchrotron XRD PY - 2015 AN - OPUS4-35470 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akhmetova, Irina T1 - In situ investigation of mechanochemical syntheses of manganese phosphonates with N-containing ligands N2 - Mechanochemistry is a versatile approach for green and fast synthesis of pure substances. The exploration of the chemistry of metal phosphonates has gained considerable interest during the last decades due to their structural diversity. We synthesized manganese phosphonates in milling reactions. The mechanochemical reactions were investigated in situ to reveal the underlying mechanisms. T2 - Joint BER II and BESSY II User Meeting CY - Berlin, Germany DA - 05.12.2018 KW - Metal phosphonates KW - Mechanochemistry KW - PXRD KW - In situ KW - Thermography PY - 2018 AN - OPUS4-46999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Herausforderungen bei der Mikroplastik-Analyse: Probennahme, Probenvorbereitung und Analyse N2 - Seit einigen Jahren wird in den Medien viel über das Thema Mikroplastik (MP) diskutiert. Dabei wird häufig von einer großen Anzahl an MP-Partikeln in allen Bereichen der Umwelt, wie dem Wasser, dem Boden, der Luft und in Biota sowie über mögliche Gefahren ausgehend von MP, berichtet. Jedoch sind diese Studien häufig nicht untereinander vergleichbar, da verschiedene Konzepte der Probennahme, der Aufbereitung und unterschiedliche Detektionsverfahren verwendet werden. Um diesen Mangel an vergleichbaren und aussagekräftigen Daten zu beheben, wird aktuell versucht, eine Harmonisierung der Mikroplastikanalytik voranzutreiben. Neue, schnellere Methoden zur MP Quantifizierung wurden entwickelt. Gleichzeitig werden neue Strategien zur Probenahme und Probenvorbereitung konzipiert, da hier die Fehlerquellen besonders große Auswirkungen auf das Ergebnis haben. In diesem Vortrag werden verschiedene Verfahren bezogen auf Probennahme, -vorbereitung und Analytik gezeigt und bezüglich ihres möglichen Ergebnisses diskutiert. T2 - 7. Workshop Technologieplattform Mikroverkapselung - Bioabbaubare Mikropartikel und Mikrokapseln CY - Bremen, Germany DA - 24.10.2019 KW - Mikroplastik KW - Analytik PY - 2019 AN - OPUS4-49395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Haferkamp, Sebastian A1 - Emmerling, Franziska T1 - Insights into mechanochemical Knoevenagel condensations N2 - Mechanochemistry paves the way to simple, fast, and green syntheses. Despite considerable effort, there is a lack in understanding of the underlying mechanisms. In situ investigations help to understand these mechanisms, which occur during a mechanochemical reaction. Here we present a universal strategy for simultaneous real-time in situ analysis, combining X-ray diffraction, Raman spectroscopy, and thermography. The potential of of our approach is shown for diffrent model reactions. T2 - Adlershofer Forschungsforum 2019 CY - Berlin, Germany DA - 11.11.2019 KW - Mechanochemistry KW - In situ KW - Knoevenagel condensation PY - 2019 AN - OPUS4-49694 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feiler, Torvid T1 - Optimierung der mechanischen Eigenschaften eines organischen Kristalles durch Polymorphismus für die Anwendung als flexibler Waveguide N2 - Kristalle sind in der Regel spröde und neigen dazu, bei mechanischer Belastung zu brechen. Dieses Verhalten schränkt ihre Anwendungsmöglichkeiten stark ein. Durch die Entdeckung von mechanischer Flexibilität in Kristallen wurde dieses Problem gelöst. Je nach Art der Verformung können Kristalle in plastisch (irreversibel) oder elastisch (reversibel) biegbar unterteilt werden. Die Verbindung 4-Brom-6-[(6-chlorpyridin-2-ylimino)methyl]phenol (BCMPMP) ist ein vielversprechender Kandidat für die Anwendung als flexibler Waveguide. BCMPMP hat zwei verschiedene Polymorphe mit unterschiedlichen optischen und mechanischen Eigenschaften. Die spröden Kristalle der Form I zeigen eine sehr schwache Emission bei 605 nm (λex = 425 nm; Photolumineszenz-Quantenausbeute Φ = 0,4 %). Im Gegensatz dazu zeigt die plastische Form II eine starke Emission bei 585 nm (λex = 425 nm; Φ = 8,7 %). Aufgrund der mechanischen Flexibilität wurde die Eignung der Form II als Waveguide untersucht. T2 - Tag der Chemie 2021 CY - Online meeting DA - 06.07.2021 KW - Flexible crystals KW - Polymorphism KW - Waveguide PY - 2021 AN - OPUS4-53908 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kraus, Werner T1 - Hexanuclear actinide (IV) carboxylate formed by competition between ligation and hydrolysis T2 - The 15th International Conference on X-ray Absorption Fine Structure (XAFS15) CY - Beijing, China DA - 2012-07-22 PY - 2012 AN - OPUS4-27251 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Emmerling, Franziska T1 - A general strategy for the synthesis of micelle-templated mesoporous metal carbonates and metal oxides T2 - 25. Deutsches Zeolith-Tagung CY - Hamburg, Germany DA - 2013-03-06 PY - 2013 AN - OPUS4-27254 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Batzdorf, Lisa T1 - Mechanochemical Synthesis of Co and Zn Oxalate Bipyridine Structures and Reorganization at high Temperatures T2 - 3rd International Conference on Metal-Organic Frameworks and Open Framework Compounds CY - Edinburgh, Scotland DA - 2012-09-16 PY - 2012 N1 - Geburtsname von Batzdorf, Lisa: Tröbs, L. - Birth name of Batzdorf, Lisa: Tröbs, L. AN - OPUS4-27192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Batzdorf, Lisa T1 - Mechanochemical Synthesis of Two 2D Organometallic Structures: [Co(C2o4)(4,4'-bipy)] and [Zn3(C2O4)3(4,4'-bipy)4] T2 - 2. Berliner Chemie Symposium vom JCF Berlin CY - Berlin, Germany DA - 2012-04-03 PY - 2012 N1 - Geburtsname von Batzdorf, Lisa: Tröbs, L. - Birth name of Batzdorf, Lisa: Tröbs, L. AN - OPUS4-27193 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiesner, Yosri T1 - MIKROPLASTIK – von der Probenvorbereitung bis zur Analytik N2 - Der Vortrag beschreibt die Herausforderungen bei der Analyse von Mikroplastik inklusive Probennahme, Probenvorbereitung und Detektion. Es werden Ergebnisse aus dem BMBF-Projekt RUSEKU vorgestellt. T2 - LABO-Anwendertag CY - Online meeting DA - 23.11.2021 KW - Mikroplastik KW - TED-GC/MS KW - Mikroplastik-Analytik PY - 2021 AN - OPUS4-53829 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik – Ein Problem für die Menschheit? N2 - Mikroplastik findet sich in Ozeanen, Seen, Flüssen und Bächen. Es kann in unserem Boden, in der Luft und sogar in Organismen nachgewiesen werden. Jedes Jahr werden weltweit Millionen Tonnen freigesetzt. Doch wo und wie landet Mikroplastik in der Umwelt? Und wie können wir diese winzigen Partikel nachweisen? T2 - Berlin Science Week CY - Berlin, Germany DA - 01.11.2021 KW - Mikroplastik KW - TED-GC/MS PY - 2021 AN - OPUS4-53734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik Referenzmaterial und erste Vergleichsuntersuchungen N2 - Hierbei geht es um die Vorstellung von ersten Möglichkeiten um Referenzmaterial für die Mikroplastik-Analytik herzustellen und die Ergebnisse erster Vergleichsversuche. T2 - EUROLAB-D Workshop: Mikroplastik in der Praxis CY - Online meeting DA - 30.11.2021 KW - Mikroplastik KW - Referenzmaterial KW - Vergleichsversuche PY - 2021 AN - OPUS4-53880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Microplastics at BAM: TED-GC/MS and reference materials N2 - Thsi talk aims to present the activities of microplastic analysis at BAM according to TED-GC/MS and reference materials developement. T2 - Webinar BAM / University of Birmingham CY - Online meeting DA - 15.06.2021 KW - Microplastic KW - TED-GC/MS KW - Reference materials PY - 2021 AN - OPUS4-53738 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Linberg, Kevin T1 - Taking Fluorine Interaction to the Extremes using XRD and DFT Simulations N2 - This work aims to investigate the role of F-F and F-π interactions in dictating structural and mechanical properties, through a combination of X-ray powder diffraction and dispersion-corrected density functional. As no benchmarking data exist for F-dominating organic system, we first assess how different functionals affect the mechanical properties of the material. T2 - CRC 1349 Fluorine-Specific Interactions Symposium CY - Online meeting DA - 27.09.2021 KW - High Pressure KW - Fluorine Interaction KW - Hexafluorobenzen KW - Density Functional Theory PY - 2021 AN - OPUS4-53654 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feiler, Torvid T1 - Tuning the mechanical flexibility of organic molecular crystal by polymorphism for flexible optical waveguide N2 - Crystalline molecular materials are usually brittle and are prone to break into pieces upon external mechanical force. This fragility poses challenges for their application in next-generation technologies, including sensors, synthetic tissues, and advanced opto-electronics. The recent discovery of mechanical flexibility in single crystals of molecular materials has solved this issue and enable the design of smart flexible device technologies. Plastic crystals can be deformed permanently. This behavior is based on anisotropic molecular arrangements and the existence of facile slip planes which allow a permanent motion within the lattice. In contrast, elastic crystals can be deformed, but regain the original structure when the force is removed. This phenomenon is related to energetically isotropic molecular packing. Here we report 4-bromo-6-[(6-chlorolpyridin-2-ylimino)methyl]phenol (BCMPMP) as a promising candidate for future waveguide technologies. It turns out that BCMPMP has two different polymorphs with distinct optical and mechanical properties. Form I crystallizes in the orthorhombic space group Pca21 and shows brittle behavior. This structure exhibit very weak emission at 605 nm (λex = 425 nm) together with a low fluorescence quantum yield (Φ = 0.4 %). On the other hand, form II (monoclinic space group P21/c) has a large plastic regime and a bright emission at 585 nm (λex = 425 nm; Φ = 8.7 %). Based on its improved mechanical and optical properties, form II was explored as a bendable optical waveguide. Light was successfully propagated through a straight-shaped and mechanically deformed BCMPMP crystal. Depending on the light source, active or passive waveguiding could be achieved. So BCMPMP can also be used as a flexible wavelength filter. T2 - International School of Crystallography in Erice CY - Online meeting DA - 30.05.2021 KW - Flexible crystals KW - Polymorphism KW - Waveguide PY - 2021 AN - OPUS4-53905 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meurer, Maren T1 - Optimierung der Mikroplastik Analytik mittels TED-GC/MS sowie Reduktion von falsch positiven PE Werten durch beschleunigtes Lösemittelverfahren N2 - Ein drastisch hoher Polyethylene Massenanteil wurde bei der Analytik der Umweltproben im Vergleich zu weiteren Polymeren festgestellt. Zu einem Überbefund des Polyethylene können strukturell verwandte Verbindungen wie z.B. Fette durch Signalüberlagerung führen. Mithilfe von beschleunigter Lösemittelextraktion soll die störende Komponente entfernt werden. T2 - Die Wasser 2021 CY - Online meeting DA - 10.05.2021 KW - Extraktion KW - Mikroplastik KW - ASE KW - Polyethylene PY - 2021 AN - OPUS4-53896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - Synthesizing a library of 1000+ reproducible MOFs N2 - While the synthesis of Metal-Organic Framework (MOF) particles can be as easy as adding two solutions together, reproducibly obtaining the same particles, time and time again, is a lot harder. As laboratory-independent reproducibility is a cornerstone of the scientific method, we must put effort into finding and controlling all necessary parameters to achieve this. An open-source Python/EPICS-controlled robotic platform (see picture) was adapted to systematically explore this for a 20 ml MOF synthesis of the Zeolitic Imidazole Framework-8 (ZIF-8) chemistry in methanol. Parameters that were explored included: 1) addition sequence, 2) addition speeds, 3) reaction times, 4) source chemicals, 5) stirring speeds, 6) stirring bar choice, 7) starting concentrations, and 8) workup methodologies. It was found that, by controlling these parameters, highly reproducible syntheses are obtained. Secondly, the variation of these parameters alone led to a dramatic difference in volume-weighted particle size means, which exceeds an order of magnitude as investigated by our in-house X-ray scattering instrument [1]. The syntheses are thoroughly documented in an automated fashion, and the synthesis libraries as well as analyses libraries will become available in batches soon. With this library, it will be possible to extract previously unknown correlations, and other laboratories can produce specific particles by following the exact procedures of the particles of their choice. T2 - 787. WE-Heraeus-Seminar: Accelerated Discovery of New Materials CY - Bad Honnef, Germany DA - 15.05.2023 KW - Metal organic frameworks KW - Automation KW - Lab automation KW - Robotic-supported synthesis KW - Reproducibility KW - Synthesis library KW - X-ray scattering KW - Particle size distribution PY - 2023 AN - OPUS4-57596 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - Digital Everything: X-ray Scattering and Synthesis Laboratories N2 - In our (dramatically understaffed) X-ray scattering laboratory, developing a systematic, holistic methodology let us provide scattering and diffraction information for more than 2100 samples for 200+ projects led by 120+ collaborators. Combined with automated data correction pipelines, and our analysis and simulation software, this led to more than 40 papers in the last 5 years with just over 2 full-time staff members. This year, our new, modular synthesis platform has made more than 1000 additional samples for us to analyse and catalogue. By virtue of the automation, the synthesis of these samples is automatically documented in excruciating detail, preparing them for upload and exploitation in large-scale materials databases. This talk is intended to spark ideas and invite collaborations by providing an overview of: 1) the current improvements in our wide-range X-ray scattering laboratory methodology, and 2) introducing our open, modular robotic platform for systematic sample preparation. T2 - Seminar at KIT CY - Karlsruhe, Germany DA - 17.08.2023 KW - Lab automation KW - Data stewardship KW - Scattering KW - X-ray scattering KW - Automated synthesis KW - Data pipelines PY - 2023 AN - OPUS4-58234 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard A1 - Breßler, Ingo T1 - 30.000+ datasets in an underground SciCat instance: the good, the bad, and the improvables. N2 - For the last four years, we have been running a SciCat instance to manage the projects and data in our X-ray scattering laboratory. We here report on the configuration of this SciCat instance, how it connects to the scientific workflow, and how it is integrated in the data pipeline. T2 - SciCat 2023 CY - Didcot, UK DA - 18.07.2023 KW - Scicat KW - X-ray scattering KW - Laboratory management KW - Research Data Management KW - Laboratory organization KW - RunDeck PY - 2023 AN - OPUS4-57958 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - McSAS for SAS analysis: Usage, Benefits and Potential Pitfalls N2 - This talk introduces McSAS, code for analysis of scattering patterns to extract particle size distributions. It highlights how it works, how it should be used, and when it may (not) be applied T2 - Better with Scattering workshop 2020 CY - BAM, Berlin, Germany DA - 16.03.2020 KW - Small angle scattering KW - Software KW - Analysis PY - 2020 AN - OPUS4-51019 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Smales, G. J. T1 - DACHS-MOFs Database for Automation, Characterisation, and Holistic Synthesis N2 - The DACHS (Database for Automation, Characterization and Holistic Synthesis) project aims to create completely traceable experimental data, covering syntheses, measurements, analyses, and interpretations. DACHS MOFs focuses on the synthesis and characterisation of metal-organic frameworks (MOFs), across multiple, automation-assisted experimental series (AutoMOFs), with the overall goal of producing reproducible MOF syntheses. So far > 1200 MOF samples have been synthesised, with SAXS/WAXS data currently being collected on all samples. All results, including those from “failed” syntheses, are included in the database, as results are results and should be considered agnostic to any positive ornegative interpretations. DACHS MOFs represents the initial trial of the DACHS project, serving as a comprehensive resource for researchers aiming to optimize the synthesis and characterization of MOFs. T2 - XIX International Small Angle Scattering Conference CY - Taipei, Taiwan DA - 04.11.2024 KW - Lab automation KW - Synthesis KW - Metal organic frameworks KW - Zif-8 KW - Databases KW - Synthesis data PY - 2024 AN - OPUS4-61626 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-ToF mass spectrometry for the characterization of biobased polymers suitable for depollution N2 - In this work, bio-based polymers were synthesized and designed as polymers phases for adsorption of a variety of pollutants from aqueous solutions. The obtained adsorption results showed that the integration of bio-sourced synthons generate attractive hydrophilicity, and wettability of the resulting adsorbent phase. Such polymers phases enable stronger interactions with the organic and inorganic pollutants in water. A wide variety of different bio-based polymers structures (e. g. poly(ethersulfones, poly(etherphosphines or poly(etherpyridines) with different functional groups were successfully designed in order to adapt chemical structure to different pollutants type and matrice nature. In order to characterize and to determine the correlation between polymer structures and nature of interaction with pollutants, different analytical technics (NMR, GPC, ATG, DSC, Mass spectrometry) were successfully used. Amongst them, MALDI TOF mass spectrometry plays a superior role since this technique enables the simultaneous determination of the polymer structure, polymer end groups and molecular weight. This work focusses on the characterization of synthesized polymers. The chemical structure of the repeating unit, the nature of the end groups, as well as the molecular weight, which are all important for the specific interactions of the polymer with the pollutants were clearly determined and suggestions to improve these interactions by changing the synthetic pathway could be given. T2 - 12. Journees maghreb-europe. Matériaux et Applications aux Dispositifs et Capteurs CY - Monastir, Tunisia DA - 08.11.2022 KW - MALDI TOF MS KW - Biobased polymers KW - Depollution PY - 2022 AN - OPUS4-56237 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gründer, Klaus-Peter A1 - Geburtig, Anja T1 - Optical Methods in Single Crystal Deformation Analysis at High Temperature N2 - This poster deals with grating methods, white light intereference microscopy, a setup for HT investigation and applications. T2 - International Symposium on „Photonics in Measurement“ CY - Aachen, Germany DA - 11.06.2002 KW - Grating method KW - White light intereference microscopy KW - HT investigation PY - 2002 AN - OPUS4-35899 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita A1 - Schlick-Hasper, Eva A1 - Geburtig, Anja A1 - Bethke, John T1 - Stand der BAM-Forschungsvorhaben T2 - Erfahrungsaustausch Verpackungen CY - Berlin DA - 2014-09-16 PY - 2014 AN - OPUS4-32638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Perret, Birgit T1 - Halogen-free flame retarded Bisphenol a polycarbonate blends T2 - 10th European Symposium on Polymer Blends CY - Dresden, Germany DA - 2010-03-07 PY - 2010 AN - OPUS4-21034 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter T1 - Beispiele für die Nutzung des Energietransports durch langwellige (thermische) Strahlung T2 - 35. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) "Umwelteinflüsse erfassen, simulieren, bewerten" im Fraunhofer Institut für Chemische Technologie (ICT) CY - Pfinztal, Germany DA - 2006-03-22 PY - 2006 AN - OPUS4-12265 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Chancen und Grenzen der Verkürzung von Bewitterungstests durch empfindliche Chemilumineszenz-Detektion T2 - DFO Qualitätstage 2008, Appearance, Bewitterung, Korrosion, Farbe CY - Fürth, Germany DA - 2008-10-07 PY - 2008 AN - OPUS4-18710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - The influence of humidity and wetness on weathering results T2 - Konferenz ATCAE (Atlas Technical Conference for Accelerated Ageing and Evaluation) CY - Oxford, England DA - 2008-09-15 PY - 2008 AN - OPUS4-18000 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Grundsätzliches zur Verfahrensauswahl bei der künstlichen Bestrahlung und Bewitterung T2 - 37. Jahrestagung der Gesellschaft für Umweltsimulation CY - Pfinztal, Germany DA - 2008-03-12 PY - 2008 AN - OPUS4-17337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Prüfverfahrensauswahl T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19671 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yu, Jialu T1 - Simultaneous In Situ Fe Isotope and Trace Element Analysis by LASS-MC-ICPMS / ICP-ToF-MS: Validation and Applications N2 - Iron isotopes serve as sensitive tracers of iron’s origin, transformations, and cycling in the natural system. Their sensitivity to redox changes, biological processing, and mineral–fluid interactions makes them a valuable indicators in both geochemical and biological studies. To obtain Fe isotope ratios together with trace elemental information from the same ablation volume, a laser-ablation split-stream (LASS) configuration was employed:. The laser system was coupled simultaneously to a multi-collector ICP-MS (MC-ICP-MS) and an inductively coupled plasma time-of-flight mass spectrometer (ICP-ToF-MS). The ablated aerosol is divided into two gas streams which enable for a high-precision Fe isotope measurements on the MC-ICP-MS while acquiring full quantitative multi-element datasets on ICP-ToF-MS. The performance of this approach was assessed validated using in-house gelatin reference materials and two well-characterized basaltic glass standards, BHVO-2G and BCR-2G. These materials were prepared and analysed to determine the accuracy and precision of the LASS setup. The obtained Fe isotope ratios and elemental concentrations were in a good agreement with established/published values, indicating that the method provides reliable isotope measurements alongside robust, quantitative elemental data. Following validation, the LASS technique was applied to a series of materials representing different scientific domains: the biological reference material NIST 1577c (bovine liver) and two iron-oxide materials: hematite (HMIE-NP-B01) and magnetite (MARK-NP-B01). The successful application of the method to these contrasting materials highlights the flexibility and analytical ability of the LASS approach for Fe isotope ratio measurement and elemental fingerprint in diverse geological and biological contexts. T2 - DGMS ICP-MS user meeting 2026 CY - Leipzig, Germany DA - 10.03.2026 KW - Fe isotope KW - Laser ablation KW - Geological materials KW - Split stream KW - Gelatin KW - ICP-ToF-MS KW - Elemental fingerprint PY - 2026 AN - OPUS4-65677 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn T1 - LIPSS for beginners N2 - This overview introduces to the phenomenon of Laser-Induced Periodic Surface Structures (LIPSS). Starting from a phenomenological introduction, the most relevant physical effects and theoretical models are discussed. Applications and future directions are outlined. T2 - Workshop “Ultrafast Structural Transformations in Condensed Matter – Bridging Theory and Experiment” CY - Wroclaw, Poland DA - 09.02.2026 KW - Laser-induced periodic surface structures (LIPSS) KW - Coherent optical scattering KW - Nanostructures KW - Matter reorganization PY - 2026 AN - OPUS4-65672 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hufgard, Josefin T1 - AIM Forward: Acoustic Ion Manipulation for Efficient Ambient-Pressure Ion Control N2 - In ion-based spectrometry techniques the possibility to manipulate ions is fundamentally important. Currently used ion optics mostly rely on magnetic or electric fields. The electromagnetic forces compete with ion diffusion and are therefore most effective under low-pressure conditions. Therefore, high-pressure ion optics pose challenges related to elevated powers and potentials as well as complex structures and electrode contamination. Acoustic Ion Manipulation (AIM) is a recently discovered phenomenon that relies on the unique interactions between gas-phase ions and acoustic waves. This presentation shows selected patterns of ion manipulation, highlights the flexibility of AIM and discusses its current limitations and potentials. T2 - DGMS Annual Conference 2026 CY - Leipzig, Germany DA - 10.03.2026 KW - Acoustic ion manipulation KW - Mass spectrometry PY - 2026 AN - OPUS4-65680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Discussion on Weathering Reference Materials N2 - Weathering reference materials are used to characterize the harshness of an exposure, aiming on either reproducibility of a specific exposure or on the comparability between various kinds of weathering exposure. The materials that are used as weathering reference materials differ in their sensitivities (as well as in interactions and interferences of the latter), conditioned by the different processes which lead to the respective property change. It is also essential to take into account the necessary measurement equipment for the respective property change, in order to allow timely intervention. What are the key issues on choosing a weathering reference material? What can be learned from the weathering reference materials, investigated so far? Possibilities and limitations are discussed on the basis of existing weathering reference materials. Conclusions are drawn, for establishing new weathering reference materials. T2 - 9th European Weathering Symposium CY - Basel, Switzerland DA - 18.09.2019 KW - Plastic KW - Ageing KW - Fragmentation KW - Environment KW - Digital twin PY - 2019 AN - OPUS4-49713 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Grundsätzliches zur Frage der "UV-Beständigkeit" bzw. der "Lichtbeständigkeit" polymerer Werkstoffe T2 - 42. Jahrestagung der Gesellschaft für Umweltsimulation, GUS. "Umwelteinflüsse erfassen, simulieren, bewerten" CY - Stutensee, Germany DA - 2013-03-20 PY - 2013 AN - OPUS4-27914 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Beanspruchung von HDPE-Verpackungsproben durch UV-Strahlung und Salpetersäure T2 - 43. Jahrestagung der Gesellschaft für Umweltsimulation CY - Stutensee, Germany DA - 2014-03-26 PY - 2014 AN - OPUS4-31041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter T1 - Referenzmaterialien für Bewitterungsprüfungen T2 - 32. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal, Germany DA - 2003-03-26 PY - 2003 AN - OPUS4-4078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter T1 - Reference Materials for Weathering Tests T2 - 1st European Weathering Symposium EWS CY - Prague, Czech Republic DA - 2003-09-25 PY - 2003 AN - OPUS4-4077 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - (UV-)Strahlenklima und Strahlungsmessung T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19653 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Ulrich T1 - the Influence of Mildew growth on Automotive Coatings on the Results of Outdoor Weathering T2 - 1st European Weathering Republik CY - Karlsruhe, Germany DA - 2003-09-25 PY - 2003 AN - OPUS4-4070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Weathering Reference Materials - Monitors for Weathering Exposure T2 - 3rd Symposium on Service Life Prediction CY - Sedona, AZ, USA DA - 2004-02-02 PY - 2004 AN - OPUS4-4756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilberg, Alec T1 - Untersuchung und Kompensation des Size-of-Source Effektes der Thermografie zur Prozessüberwachung in der metallischen additiven Fertigung N2 - Der Einsatz der Thermografie zur Prozessüberwachung in der additiven Fertigung von Metallen ist aktueller Schwerpunkt diverser Forschungsprojekte. Prozessbedingt können im Bauteil Risse, innere Spannungen und sonstige interne Fehlerstellen auftreten, deren Entstehung durch wichtige thermische Größen wie Phasenumwandlungstemperaturen, Abkühlgeschwindigkeiten und thermische Gradienten beeinflusst wird. Um diese Einflüsse zu untersuchen, ist eine möglichst genaue Messung dieser Parameter notwendig. Neben den häufig betrachteten Einflüssen des Emissionsgrades, der Umgebungstemperatur und der atmosphärischen Absorption besteht ein weiterer Einfluss, hervorgerufen durch das optische System. Der Kameraaufbau, das verwendete Objektiv und Teilchen im Strahlengang können zur Beugung, Streuung, Reflektion und Aberration der elektromagnetischen Strahlung führen, wodurch die thermografische Messung verfälscht wird. Dies ist ein in der Pyrometrie intensiv erforschter Effekt und wird, aufgrund der Abhängigkeit zur betrachteten Objektgröße, als Size-of-Source Effekt bezeichnet und in dieser Arbeit untersucht. Im Laser-Pulver-Auftragsschweißen (LPA) wird mittels eines Lasers auf einer Substratplatte ein Schmelzbad erzeugt und durch Einblasen von Metallpulver die lagenweise Fertigung von komplexen Bauteilen ermöglicht. Dabei können, je nach geometrischer Auflösung der Kamera, Größen des Schmelzbades im Bereich weniger Prozente der gesamten Bildfläche auftreten. Aus durchgeführten Referenzmessungen an Schwarzkörperstrahlern kann in der gleichen Größenordnung eine Abweichung der Strahlungswerte im zweistelligen Prozentbereich festgestellt werden. Daher ist in diesem Anwendungsfall der dadurch verursachte Fehler nicht zu vernachlässigen, weshalb auf Basis der Referenzmessungen eine Methode entwickelt wurde, um in Abhängigkeit der Größe des Objektes einen Faktor zur Kompensation des Size-of-Source Effektes zu berechnen. In diesem Beitrag werden erste Ergebnisse dieser im Rahmen des DFG Projektes QT-LPA (Nr. 516965606) durchgeführten Arbeiten präsentiert. T2 - DGZfP Jahrestagung 2025 CY - Berlin, Germany DA - 26.05.2025 KW - SSE KW - Thermografie KW - Size of source Effect PY - 2025 AN - OPUS4-65651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilberg, Alec T1 - Multispektrale Thermografie zur quantitativen Temperaturbestimmung im DED-LB/M Prozess N2 - Additive Fertigungsverfahren bieten konstruktive Freiheiten, die mit konventionellen Herstellungsverfahren nur schwer zu realisieren sind. Durch die Möglichkeit hochkomplexe Bauteile aus Metall fertigen zu können, stellt die additive Fertigung in vielen Industriezweigen eine vielversprechende Fertigungsalternative da. Allerdings treten prozessbedingt hohe Temperaturgradienten und schnelle Phasenumwandlungen auf, die maßgeblich entscheidend für die Mikrostruktur und die Bildung von internen Spannungen, Rissen und weiteren Defekten sind. Diese Effekte wirken sich direkt auf die mechanischen Eigenschaften der gefertigten Bauteile aus und verdeutlichen die Notwendigkeit einer zuverlässigen Bauteilprüfung. Dabei sind nachgelagerte Verfahren in der Regel zeit- und kostenaufwändig, weshalb die Anwendung von in-situ Verfahren zur Qualitätssicherung im Fokus diverser Forschungsprojekte steht. Die Thermografie erlaubt die orts- und zeitaufgelöste Messung der im Prozess auftretenden Temperaturfelder. Allerdings müssen die tatsächlich gemessenen digitalen Sensorwerte mittels geeigneter radiometrischer Modelle in Temperaturen umgewandelt werden. Da diese Modelle in der Regel auf Basis von Messungen an Schwarzkörperstrahlern kalibriert werden, kann dieses Vorgehen nur zufriedenstellende Werte liefern, sofern der Emissionsgrad des zu messenden Objektes bekannt ist. Während in statischen Anwendungen häufig ein konstanter Materialreferenzwert hinreichend befriedigende Ergebnisse liefert, ist man in der additiven Fertigung mit dem Problem konfrontiert, dass der Emissionsgrad lokal in kürzester Zeit starke Änderungen durchläuft. Beeinflusst wird dieser Effekt unter anderem durch Temperatur, Phasenzustand und Oberflächenzustand. Das hier vorgestellte Verfahren nutzt Referenzmessungen des Emissionsgrades in Abhängigkeit von Temperatur, Winkel und Phasenzustand, um in einem DED-LB/M-Prozess (auch Laser-Pulver-Auftragschweißen, LPA) sowohl den Emissionsgrad als auch die tatsächliche Temperatur orts- und zeitaufgelöst zu bestimmen. Grundlage hierfür sind multispektrale thermografische Messungen, bei denen (quasi-) synchron in acht unterschiedlichen Wellenlängenbereichen gemessen wird. In diesem Beitrag werden Ergebnisse der im Rahmen des DFG-Projektes QT-LPA (Nr. 516965606) durchgeführten Arbeiten präsentiert. T2 - Thermo25 CY - Garching bei München, Germany DA - 11.11.2025 KW - Thermografie KW - TES KW - Multispektral KW - DED-LB/M KW - Laserpulverauftragschweißen PY - 2025 AN - OPUS4-65652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ziegler, Mathias A1 - Strobach, L. T1 - Infrarotreflektographie und Blitzthermographie zur Sichtbarmachung von historischen Farbschichten am Flugzeug Bücker Bü 181 Bestmann N2 - Die Geschichte eines Flugzeuges ist häufig von unterschiedlichen Nutzungsphasen geprägt. Zum Beispiel ist der Wechsel des Eigentümers eines Flugzeuges häufig mit umfassenden Veränderungen der Farbgebung und Kennzeichnung verbunden. Wenn ein Flugzeug in die Sammlung eines Museums aufgenommen wird, zeigt es entweder den letzten Einsatzzustand oder andere zu späteren Zeiten durchgeführte Reparaturen auf seiner Oberfläche. Oft befinden sich unterhalb dieser letzten äußeren Schicht, ältere Spuren der Nutzung. Um diese verdeckt liegenden Lackierungen sichtbar zu machen, können die Verfahren der Infrarotreflektographie und der aktiven Thermographie eingesetzt werden. Die Infrarotreflektographie wird häufig in der Gemälderestaurierung eingesetzt, um zum Beispiel Vorzeichnungen sichtbar zu machen. Die aus der industriellen zerstörungsfreien Prüfung bekannten Verfahren der aktiven Thermographie fanden bisher überwiegend im Bereich der Bauwerksuntersuchungen Anwendung. Erste Ergebnisse zu Farbuntersuchungen an historischen Flugzeugen mit den beiden Verfahren fanden am Deutschen Museum München in Zusammenarbeit mit der TU-München statt. Ein Projekt der HTW-Berlin mit der Bundesanstalt für Materialforschung und –prüfung (BAM) und dem Militärhistorischen Museum Flugplatz Berlin-Gatow greift diese Anwendungsidee auf und vergleicht beide Verfahren. Am Beispiel des Flugzeuges Bücker Bü 181 Bestmann können die Möglichkeiten, Grenzen und Potentiale der Technologien zum gegenwärtigen Entwicklungsstand verdeutlicht werden. T2 - Material Truth CY - Magdeburg, Germany DA - 04.03.2026 KW - Aktive Thermographie KW - Flugzeuggeschichte KW - Zerstörungsfreie Prüfung (ZfP) KW - Infrarotreflektographie PY - 2026 AN - OPUS4-65658 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Quantitative Auswertemöglichkeiten bei der spektralen Bestrahlung – Berechnung des Wirkungsspektrums N2 - Für die Bewertung des Wellenlängeneinflusses auf die Alterungsvorgänge bei der Bestrahlung UV- oder lichtempfindlicher Materialien kann die Methode der spektralen Bestrahlung angewendet werden. Im Prinzip wird dabei das linear dispergierte Spektrum einer Strahlenquelle mit kontinuierlichem Spektrum (z.B. Xe-Lampe) auf eine Probenoberfläche abgebildet, so dass Ort einer Materialänderung und Wellenlänge der Bestrahlung einander zugeordnet werden können. Nachfolgende lokal-auflösende Analysemethoden ermitteln eine Eigenschaftsänderung an einem spezifischen Ort der Probe, aus dem sich dann die Bestrahlungswellenlänge ergibt. Der verwendete Aufbau wird beschrieben. Es wird an einem ausgewählten Beispiel gezeigt, wie durch geeignete Anbindung eines Messsystems zur Bestimmung der spektralen Bestrahlungsstärke und ortsaufgelöste Messungen der Eigenschaftsänderungen eine quantitative Auswertung realisiert werden kann. Der Einfluss nichtlinearer Alterungsverläufe wird diskutiert. Grenzen der Methode werden aufgezeigt und Erweiterungsmöglichkeiten dargestellt. T2 - 46. Jahrestagung der GUS CY - Stutensee-Blankenloch, Germany DA - 22.03.2017 KW - UV-Bestrahlung PY - 2017 AN - OPUS4-42577 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ekici, Nilsah A1 - Sobol, Oded T1 - SHIMMER Database for Hydrogen Integration in European Gas Grids N2 - The integration of hydrogen into existing natural gas infrastructure is an important pathway for achieving the European Union’s climate neutrality goals. However, hydrogen blending in gas networks raises technical challenges related to material compatibility, operational safety, and the lack of harmonized assessment methodologies across Europe. These challenges are addressed within the Safe Hydrogen Injection Modelling and Management for European Gas Network Resilience (SHIMMER) project, funded by the Clean Hydrogen Partnership under the Horizon Europe programme. A key outcome of the project is the development of an openly accessible database designed to support the assessment of hydrogen readiness in European gas networks and to facilitate knowledge sharing. The database compiles infrastructure data provided by project partners, including several European transmission and distribution system operators. It contains detailed information on gas network components such as pipelines, valves, fittings, gaskets, and compressors. In addition, a new category has been introduced focusing on the hydrogen compatibility of gas grid components and materials. This section provides structured information linking infrastructure components with material types and their hydrogen compatibility, enabling more systematic evaluation of hydrogen injection scenarios. By organizing heterogeneous datasets into a harmonized and user-friendly structure, the SHIMMER database supports research, best-practice development, and the safe integration of hydrogen into existing European gas infrastructure. T2 - EHEC 2026 CY - Seville, Spain DA - 11.03.2026 KW - Database KW - Gas Grid KW - Hydrogen KW - Low-carbon KW - Pipeline Steel PY - 2026 AN - OPUS4-65683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker A1 - Geburtig, Anja T1 - Veränderung der Kratzbeständigkeit und der Reflow-Fähigkeit von Automobil-Klarlacken durch Bewitterung T2 - DFO Qualitätstage 2005, "Moderne Verfahren zur Oberflächencharakterisierung" der Deutschen Forschungsgesellschaft für Oberflächenbehandlung e. V. CY - Berlin, Germany DA - 2005-10-25 PY - 2005 AN - OPUS4-12505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Grundsätzliches zur Verkürzung von Bewitterungstests durch künstliche Bewitterung T2 - 35. Jahrestagung der Gesellschaft für Umweltsimulation (GUS), "Umwelteinflüsse erfassen, simulieren, bewerten" am Fraunhofer Institut für Chemische Technologie (ICT) CY - Pfinztal, Germany DA - 2006-03-22 PY - 2006 AN - OPUS4-12266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Entwicklung künstlicher Bewitterungstests für Lacke und Beschichtungen T2 - GfKORR-Seminar "Korrelation von Labortests mit Praxisbedingungen im Automobilbereich" der Gesellschaft für Korrosionsschutz e. V. CY - Frankfurt am Main, Germany DA - 2006-02-15 PY - 2006 AN - OPUS4-12111 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Der Einfluss von Feuchte und Nässe bei der Bewitterung T2 - 36. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Karlsruhe, Germany DA - 2007-03-14 PY - 2007 AN - OPUS4-14651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Grenzflächenklima an bestrahlten Oberflächen, Strahlungsmessung T2 - "Bewitterung von Kunststoffen und Lacken", Seminar der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2007-05-10 PY - 2007 AN - OPUS4-14813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Spectral sensivity of polymeric degradation - spectral efficiency of stabilizers T2 - European Coating Conference CY - Nuremberg, Germany DA - 2007-05-07 PY - 2007 AN - OPUS4-14812 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Spektrale Empfindlichkeit der Photoalterung von Lacken und Kunststoffen T2 - Fachtagung "Bewitterung von Kunststoffen und Lacken in der Automobilindustrie" des Süddeutschen Kunststoff-Zentrums CY - Würzburg, Germany DA - 2007-02-07 PY - 2007 AN - OPUS4-15904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Notwendigkeit der Erfassung klimatischer Einflüsse auf Transportbehälter aus Kunststoff T2 - CEEES Kongress 2007, "Umweltsimulation in der Produktentwicklung" CY - Nuremberg, Germany DA - 2007-05-22 PY - 2007 AN - OPUS4-15905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Zum (UV-)Strahlenklima der Erde T2 - "Bewitterung von Kunststoffen und Lacken", Seminar der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2007-05-10 PY - 2007 AN - OPUS4-14814 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Improved evaluation of activation spectra determined by the filter technique T2 - 3rd European Weathering Symposium CY - Kraków, Poland DA - 2007-09-12 PY - 2007 AN - OPUS4-15906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Artificial weathering including acidic deposition T2 - 3rd European Weathering Symposium CY - Kraków, Poland DA - 2007-09-12 PY - 2007 AN - OPUS4-15907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wawrzyn, Eliza T1 - Flame retardancy in Pc/Silicone rubber blends using BDP and additional additives T2 - 20th Annual Conference on Recent Advances in Flame Retardancy of Polymeric Materials CY - Stamford, CT, USA DA - 2009-06-01 PY - 2009 AN - OPUS4-19592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Accelerated Weathering Test for Plastics and Coatings that are exposed to Acidic Precipitation T2 - 7th International Symposium on Weatherability CY - Yokohama, Japan DA - 2008-10-23 PY - 2008 AN - OPUS4-18909 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Aussagekraft von Korrelationskoeffizienten T2 - 38. Jahrestagung der GUS CY - Stutensee, Germany DA - 2009-03-18 PY - 2009 AN - OPUS4-19151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Spektrale Empfindlichkeit und Aktivierungsspektren von Polymeren T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Alterung von Polymeren durch Witterungsbeanspruchung T2 - 25. Darmstädter Kunststoff-Kolloquium, "Schadensanalytik heute - Methoden und Anwendungen" CY - Darmstadt, Germany DA - 2009-09-10 PY - 2009 AN - OPUS4-20573 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Influence of Weathering on the Stability of Flame Retardancy in Polymeric Materials for Outdoor Use T2 - 4th European Weathering Symposium (Poster 26) CY - Budapest, Hungary DA - 2009-09-16 PY - 2009 AN - OPUS4-19918 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wawrzyn, Eliza T1 - FLAME RETARDANCY IN PC/SILICONE RUBBER/BDP/PTFE BLEND T2 - FRPM'09 12th European Meeting on Fire Retardant Polymers CY - Poznan, Poland DA - 2009-08-31 PY - 2009 AN - OPUS4-20016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Grenzflächenklimate an bestrahlten Oberflächen, Messung der Oberflächentemperatur T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Genormte Prüfverfahren T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Alterungsvorgänge durch Bewitterung bei Beschichtungen und deren Untersuchung und Prüfung T2 - 42. SAH-Tagung 2010, "Holzoberflächen in der Fassadengestaltung", Schweizerische Arbeitsgemeinschaft für Holzforschung CY - Weinfelden, Switzerland DA - 2010-10-26 PY - 2010 AN - OPUS4-22587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Zusammenhang von molekularen Alterungsvorgängen und beobachtbaren Eigenschaftsänderungen bei der Bewitterung von Polymeren T2 - 39. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Stutensee, Germany DA - 2010-03-17 PY - 2010 AN - OPUS4-21013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Polypropylene Life Time Estimation by Developing Dose Response Functions with Respect to Irradiation and Temperature - ViPQuali Project T2 - 8th International Symposium on Weatherability CY - Tokyo, Japan DA - 2010-10-14 PY - 2010 AN - OPUS4-22142 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Training Course "Effects of Moisture in the Course of Weathering" T2 - 4th European weathering symposium CY - Budapest, Hungary DA - 2009-09-16 PY - 2009 AN - OPUS4-20639 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Alterungsvorgänge bei Kunststoffbehältern T2 - BAM-AK Prüfstellen CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-22143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wawrzyn, Eliza T1 - Are novel aryl phospates competitors for BDP in halogen-free flame retarded PC/ABS/PTFE blend? T2 - Polymers for Advanced Technologies 2011 CY - Lodz, Poland DA - 2011-10-02 PY - 2011 AN - OPUS4-24439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Arrhenius-Ansatz zur Lebensdauervorhersage aus künstlichen Bewitterungsversuchen T2 - 41. Jahrestagung der GUS 2012 - Umwelteinflüsse erfassen, simulieren, bewerten CY - Stutensee, Germany DA - 2012-03-14 PY - 2012 AN - OPUS4-25627 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - CarbonLifeCycle - Weathering Induced Degradation of Nanoparticle-Functionalised Polymers T2 - 5th European Weathering Symposium (EWS) CY - Lisbon, Portugal DA - 2011-09-21 PY - 2011 AN - OPUS4-24424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Development of al leaching test to estimate emissions from synthetic sports grounds into soil and ground water under weathering exposure T2 - [Conference] "Service Life Prediction of Polymeric Materials: Vision for the Future" CY - Monterey, CA, USA DA - 2013-03-03 PY - 2013 AN - OPUS4-27915 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - PP Numerical Photoageing Simulation by Dose Response Functions with Respect to Irradiation and Temperature - ViPQuali Project T2 - Service Life Prediction of Polymeric Materials: Vision for the Future CY - Monterey, CA, USA DA - 2013-03-03 PY - 2013 AN - OPUS4-28355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Surface Temperatures of Irradiated Test Specimens - Decisive Physical Quantities and a Largely Unsolved Problem T2 - 6th European Weathering Symposium EWS CY - Bratislava, Slovakia DA - 2013-09-11 PY - 2013 AN - OPUS4-31044 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - A New Weathering Device for Plastic Containers with Parallel impact of Dangerous Liquids T2 - 27th IAPRI Symposium on Packaging CY - Valencia, Spanien DA - 2015-06-06 PY - 2015 AN - OPUS4-33436 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Messung der effektiven UV-Bestrahlung bei der Bewitterung von Polymeren N2 - Bei der Bestrahlung und Bewitterung von polymeren Werkstoffen wird die Degradation durch eine Absorption von Strahlung initiiert und meistens durch weitere Klimagrößen, wie z.B. Wärme, Feuchte und atmosphärische Gase beeinflusst. Die Messung einer effektiven Bestrahlungsstärke und ihre zeitliche Integration sind deshalb von großer Bedeutung. Photochemische Prozesse werden beim Sehen oder allgemeiner bei Farbstoffen schon durch sichtbare (VIS) Strahlung, dagegen bei der Erythembildung der Haut und der Photodegradation von Polymeren erst durch die energiereicheren Photonen der ultravioletten (UV) Strahlung initiiert. Die spektrale Empfindlichkeit des Auges und die Erythembildung sind im VIS- bzw. UV-Bereich sehr stark wellenlängenabhängig, was durch die Angabe der mit der spektralen Hellempfindlichkeit V() des Auges bewerteten VIS-Strahlung in Lux (lx) bzw. die mit der Erythem-Wirkfunktion bewertete UV Strahlung als dimensionsloser UV-Index berücksichtigt wird. Spektrale Empfindlichkeiten. Die Photodegradation von Polymeren ist im UV-Bereich ebenfalls stark wellenlängenab-hängig, was bisher nicht berücksichtigt wurde. Seit Mitte der 70er Jahre, als die lx- bzw lxh- Messung bei der Strahlungsbeanspruchung langsam durch die Ermittlung der radiometrischen UV-Bestrahlungsstärke bzw. der UV-Bestrahlung im gesamten UV-Bereich abgelöst wurde, gab es hier bei der Bewitterungsprüfung keine weiteren Fortschritte auf dem Gebiet der Charakterisierung der Strahlungsbeanspruchung im UV-Bereich. Seit Jahren liegen zahlreiche Ergebnisse über die spektrale Empfindlichkeit von Photo-degradationsprozessen vor, die zeigen, dass die spektrale Empfindlichkeit im Bereich der Globalstrahlung bei ca. 300 nm, am größten ist und im langwelligen UV-Bereich bei ca. 400 nm gegen Null geht. Die Messungen der radiometrischen Größen UV-Gesamt-bestrahlungsstärke und UV-Gesamtbestrahlung erfasst deshalb über weite Wellen-längenbereiche Strahlungsanteile, die für die Photodegradation bedeutungslos sind und mittelt über potenziell bedeutsame Änderungen im kurzwelligen UV-Bereich hinweg. Es wird das Konzept eines neuen UV-Radiometers vorgestellt, dessen spektrale Empfindlichkeit einer mittleren spektralen Empfindlichkeit der Photodegradation von Polymeren entspricht. Die effektive UV-Bestrahlungsstärke und UV-Bestrahlung kann dadurch wesentlich genauer erfasst werden. T2 - 48. Jahrestagung der GUS 2019 CY - Stutensee, Germany DA - 27.03.2019 KW - UV-Bestrahlungsstärke PY - 2019 AN - OPUS4-49712 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stelzner, Ludwig T1 - Konstruktiver Brandschutz: Abplatzverhalten von Beton, Innovativer Versuchsaufbau und klinkereffiziente Zemente N2 - Bauteile aus Beton besitzen in der Regel ohne zusätzliche Schutzmaßnahmen aufgrund ihrer großen Masse, der Nichtbrennbarkeit des Baustoffs sowie der geringen Wärmeleitfähigkeit einen hohen Feuerwiderstand. Jedoch kann der Querschnitt durch Abplatzungen im Brandfall reduziert und die Bewehrung freigelegt werden. Dies kann zum frühzeitigen Verlust der Standsicherheit und in der Folge insbesondere bei Infrastrukturbauwerken zu massiven ökonomischen Folgeschäden führen. Der Beitrag präsentiert aktuelle Forschungsarbeiten der BAM zur Analyse des Abplatzverhaltens von Beton. Auf Basis experimenteller Untersuchungen zum Einfluss der Prüfkörpergröße auf das Abplatzverhalten wird eine weiterentwickelte Prüfmethodik vorgestellt. Diese ermöglicht es, die Abplatzneigung von Betonrezepturen mittels kleinformatiger Prüfkörper zu analysieren. Abschließend wird unter Anwendung dieser Methode der Einfluss verschiedener Zementarten auf das Abplatzverhalten eines normalfesten Betons untersucht. T2 - STUVA-Tagung 2025 – Internationales Forum für Tunnel und Infrastruktur CY - Hamburg, Germany DA - 25.11.2025 KW - Explosionsartiges Abplatzen KW - Brandfall KW - Klinkereffiziente Zemente PY - 2025 AN - OPUS4-65686 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Lebensdauerabschätzung für Polypropylen durch Dosis-Wirkungsfunktionen bezüglich Bestrahlungsstärke und Temperatur (ViPQuali-Projekt) T2 - 40. Jahrestagung der GUS CY - Stutensee, Germany DA - 2011-03-28 PY - 2011 AN - OPUS4-23542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Combined impact of UV and chemical flufids on HDPE packaging material T2 - 25th IAPRI Symposium on Packaging CY - Berlin, Germany DA - 2011-05-16 PY - 2011 AN - OPUS4-23795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - UV-LEDs - a new tool to determine the spectral response T2 - 5th European Weathering Symposium CY - Lisbon, Portugal DA - 2011-09-21 PY - 2011 AN - OPUS4-24417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Evaluation of Outdoor Exposures by means of Exposure Response Functions N2 - Outdoor exposure tests are a common tool to evaluate the weathering resistance of a polymeric material or component. However, they have only a limited validity, mainly due to the limited reproducibility of the weather as well as of the bad adaptability to other exposure sites. Typically, an outdoor exposure is characterized by the measured radiant exposure; sometimes averaged temperature data are added. These can be – separately – related to long-term annual means, to get an idea on the severity of the exposure. However, as for polymeric ageing, irradiance and temperature act simultaneously, such severity of an outdoor exposure could be better described by a computed property change of a similar material, which is calculated from the hourly irradiance and temperature values on the base of established exposure response functions. In this way, various outdoor exposures are evaluated. For several exposure sites, annual deviations of the ageing amount are related to annual mean values, to evaluate the weathering reproducibility at the exposure site. Additionally, correlations to relevant weather parameters are illuminated. Also some specific exposure conditions, such as tilt angle, are tested. Compared to the use of weathering reference materials, this procedure unfavourably depends on the availability of a suited control as well as on the quality of the established exposure response function. In contrast, it enables a later exposure evaluation, on the base of documented weather data, if for instance no reference material was exposed. T2 - 8th European Weathering Symposium CY - Vienna, Austria DA - 20.09.2017 KW - Photodegradation KW - Weathering KW - Service life prediction PY - 2017 AN - OPUS4-42576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Spezifische Witterungsempfindlichkeiten verschiedener Kunststoffe im Außenbereich T2 - SKZ Fachtagung "Bewitterung von Kunststoffen und Lacken" CY - Würzburg, Germany DA - 2009-03-04 PY - 2009 AN - OPUS4-19591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Einfluss der Bewitterung auf die Kratzbeständigkeit von Automobilllackierungen T2 - Fachtagung Bewitterung und Alterung von Kunststoffen in der Automobilindustrie Süddeutsches Kunstoff-Zentrum CY - Würzburg, Germany DA - 2003-02-19 PY - 2003 AN - OPUS4-4031 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Ermittlung der Beanspruchung bei Bewitterungsversuchen - Referenzmaterialien T2 - 33. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal, Germany DA - 2004-03-17 PY - 2004 AN - OPUS4-4757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - The Action of Outdoor Weathering on the Scrath Resistance and Reflow Ability of Automotive Clearcoats T2 - 7th Nürnberg Congress CY - Nuremberg, Germany DA - 2003-04-08 PY - 2003 AN - OPUS4-4033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - The Action of Weathering on the Scrath Behaviour of Automotive Clearcoats T2 - 1st European Weathering Symposium EWS CY - Prague, Czech Republic DA - 2003-09-25 PY - 2003 AN - OPUS4-4034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina T1 - Mould growth on automotive coatings influencing the results of outdoor weathering T2 - Smart and Functional Coatings CY - Turin, Italy DA - 2013-09-26 PY - 2013 AN - OPUS4-29249 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Weathering Resistance of Hardcoats for Polycarbonate T2 - 8th Nürnberg Congress "Creative Advances in Coatings Technology" CY - Nuremberg, Germany DA - 2005-04-25 PY - 2005 AN - OPUS4-7351 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Strahlungsmessung beim Bestrahlen und Bewittern T2 - Seminar "Natürliches und künstliches Bewittern polymerer Werkstoffe" der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2005-04-28 PY - 2005 AN - OPUS4-7935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Zum (UV-) Strahlenklima der Erde T2 - Seminar "Natürliches und künstliches Bewittern polymerer Werkstoffe" der Technischen Akademie Wuppertal CY - Altdorf, Germany DA - 2005-04-28 PY - 2005 AN - OPUS4-7937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - UV-sensitive Weathering Reference Materials T2 - 2nd European Weathering Symposium CY - Gothenburg, Sweden DA - 2005-06-15 PY - 2005 AN - OPUS4-7936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -