TY - CONF A1 - Gollwitzer, Christian T1 - 3D printing material filled with metal organic frameworks analyzed by synchrotron based absorption edge tomography N2 - Absorption edge tomography, also known as differential tomography at absorption edges, is a method which exploits the sudden change of the attenuation coefficient, when the photon energy crosses the absorption edge of an element. Synchrotron radiation is the best source for absorption edge tomography, because of its small bandwidth, high intensity and easily adjustable photon energy. The synchrotron beamline BAMline at the synchrotron radiation facility BESSY II in Berlin, which is operated by the Bundesanstalt für Materialforschung und -prüfung (BAM), provides a monochromatized beam in a photon energy range from 5 keV up to 80 keV with a bandwidth of 2%, when the double multilayer monochromator is used. Together with the microtomography setup, this enables differential tomography with submicron resolution at the K edge of the elements from chromium up to the lanthanides, and up to uranium, when the L edges are used as well. In this work, metal organic frameworks (MOFs) embedded in polymer are characterized using differential tomography. MOFs are microporous structures of metal ions, coordinated by organic linker molecules, that can be used in a broad field of applications, especially in gas storage and catalysis. In this work, polymer embedded MOFs were extruded into filaments, which could be used for 3d-printing to profit from the specific properties of the MOFs in polymeric materials combined with the arbitrary shapes provided by 3d-printing. For the extrusion, different polymer classes like ABS, polyester- and polyetherurethanes, as well as different MOFs (ZIF-8, ZIF-67, HKUST-1) were used to create MOF containing filaments with a nominal diameter of 3.0 mm. Differential tomography at the edges of the Zn, Co, and Cu was then used to find the distribution of the corresponding MOF in the filament and to analyze the shape of the inclusions. T2 - MSE 2018 CY - Darmstadt, Germany DA - 26.09.2018 KW - Absorption edge KW - Tomography KW - Metal organic framework KW - Synchrotron PY - 2018 AN - OPUS4-46429 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kricheldorf, H. R. T1 - Cyclic Polyesters via ROPPOC or REP N2 - Various catalysts and polycondensation mechanisms (ROPPOC/REP/ROP)were presented and discussed with regard to the Formation of cyclic and linear polylactides. It could be shown that depending on the structure of the catalyst even- and od numbered cyclics were selectively formed. These data were supported by various analytical techniques like MALDI-TOF mass spectrometry and Size Exclusion Chromatography. T2 - Polycondensation 2018 CY - Alexandria, VA, USA DA - 14.10.2018 KW - Polycondensation KW - MALDI-TOF MS KW - Ring-opening polymerization PY - 2018 AN - OPUS4-46340 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Panne, Ulrich T1 - Polymerwissenschaften@BAM - Sicherheit macht Märkte N2 - Die Bundesanstalt für Materialforschung und -prüfung (BAM) ist eine Ressortforschungseinrichtung, die zum Schutz von Mensch, Umwelt und Sachgüter, forscht, prüft und berät. Im Fokus aller Tätigkeiten in der Materialwissenschaft, der Werkstofftechnik und der Chemie steht dabei die technische Sicherheit von Produkten und Prozessen. Dazu werden Substanzen, Werkstoffe, Bauteile, Komponenten und Anlagen sowie natürliche und technische Systeme erforscht und auf sicheren Umgang oder Betrieb geprüft und bewertet. Schwerpunkt des Vortrages sind multimodale Polymeranalytik, nanoskalige Sensormaterialien und die Charakterisierung von technischen Eigenschaften von Polymeren sowie ihre Alterung und Umweltrelevanz. T2 - Institutsvortrag CY - Fraunhofer IAP, Potsdam, Germany DA - 18.05.2018 KW - Polymerwissenschaften PY - 2018 AN - OPUS4-45243 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - Untersuchung von plasmamodifizierten Polymeren mit speziellen Analysenmethoden T2 - Abteilungsseminar, BAM, Abt. VI CY - Berlin, Germany DA - 1996-05-02 PY - 1996 AN - OPUS4-6411 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Epping, Ruben T1 - Characterization of small heterogeneities in polymers by analysis of UPLC/ESI-MS reconstructed ion chromatograms N2 - From simple molar mass disperse homopolymers over copolymers to functionalized, 3-dimensional structures containing various distributions, the complexity of polymeric materials has become more and more sophisticated in recent years. With applications in medicine, pharmacy, smart materials or for the semiconductor industry the requirements for the characterization have risen with the complexity of the used polymers. For each additional distribution, an additional dimension in analysis is needed. Small, often isobaric heterogeneities in topology or microstructure can usually not be simply separated chromatographically or distinguished by any common detector. Instead of a complicated, time consuming and/or expensive 2d-chromatography or ion mobility spectrometry (IMS) method, that also has its limitations, here a simple approach using size exclusion chromatography (SEC) coupled with electrospray ionization mass spectrometry (ESI) is proposed. We used SEC for the separation because unlike other separation modes the separation in this mode solely should occur due to the hydrodynamic volume with no interference of other interactions. This simplifies the interpretation and the above mentioned heterogeneities should show a slight difference in hydrodynamic volume. ESI mass spectrometry can offer more than an access to mass dependent information like MMD, end group masses or CCD in polymer analysis. The online coupling to SEC allows the analysis of reconstructed ion chromatograms (RIC) of each degree of polymerization. While a complete separation often cannot be achieved, the derived retention times and peak widths lead to information on the existence and dispersity of heterogeneities in microstructure or topology, that are otherwise inaccessible or accessible only by time consuming or expensive methods. Because these heterogeneities might vary with the molar mass, analysis of the whole MMD-Peak (here the total ion current (TIC)) would not lead to the desired information. The broadening of the chromatographic peaks in this case does not origin from the already well known band broadening factors in chromatography from diffusion. This band broadening is attributed to the nature and composition of the analyte itself. Surprisingly there is very little investigation into the peak width or peak shape due to analyte structure itself found in literature. It is also shown, that with proper calibration even quantitative information could be obtained. This method is suitable to detect small differences in e. g. branching, topology, monomer sequence or tacticity and could potentially be used in production control of oligomeric products or other routinely done analyses to quickly indicate deviations from set parameters. Based on a variety of examples we demonstrate the possibilities and limitations of this approach. T2 - HTC-15 CY - Cardiff, UK DA - 24.01.2018 KW - UPLC/ESI-MS KW - Reconstructed chromatograms KW - Polymer analysis KW - Microstructure PY - 2018 AN - OPUS4-44137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brirmi, N. T1 - Effect of the pendant groups on the biobased polymers obtained by click chemistry suitable for the removal of phenolic compounds from water N2 - Phenolic compounds constitute a widespread and important class of water pollutants that should be efficiently removed from wastewater because of their toxicity even at low concentrations. They are indeed discharged in the liquid effluents from various factories: chemical, petrochemical, paper, wood, metallurgy and cocking plants 1. Phenols are also found in the waste waters of agroindustrial processes like the olive oil mills, tomato processing and wine distilleries 2,3. These contaminants cause several health problems for humans and aquatic organisms 4. Therefore, numerous studies on the removal of polyphenols from wastewaters have been conducted and many techniques have been used. Among them, adsorption is considered to be the best effective and low cost method. In this context, we have focused our efforts on optimizing adsorption process by development of novel, low-cost adsorbents derived from biobased byproducts with high adsorptive capacity. The main aim of this study is to synthesize triazole-based poly(ether-pyridine)s as new synthetic adsorbent phases for the extraction of phenolic compounds from aqueous solutions. For this purpose, new fluoromonomers containing 1,2,3-triazole units were prepared by the Cu(I)-catalyzed 1,3-dipolar cycloaddition reaction and then used for the elaboration of novel poly(ether-pyridine-triazole)s (PEPTs) by direct polycondensation with isosorbide and bisphenol A. Chemical structure of fluorinated pyridinic monomers as well as resulting polymers was confirmed by 1H and 19F NMR spectroscopic methods. The thermal behaviour of the obtained PEPTs was characterized using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Their uptake performance to eliminate organic compounds was determined using High Performance Liquid Chromatography (HPLC). T2 - 12. Journees maghreb-europe. Matériaux et Applications aux Dispositifs et Capteurs CY - Monastir, Tunisia DA - 08.11.2022 KW - Biobased polymers KW - Phenolic compounds KW - 1,2,3-triazole PY - 2022 AN - OPUS4-56287 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weidner, Steffen T1 - MALDI-TOF-MS for the determination of polymerization mechanisms of biodegradable polymers N2 - Eine neue Art einer Ring-Expansion Polymerization (REP) von zyklischen Polylaktiden mittels neuer Katalysatoren wird präsentiert. MALDI-TOF Massenspektrometrie und andere analytische Techniken wurden zur Aufklärung des Mechanismus eingesetzt. Dabei zeigte sich, dass im Gegensatz zu anderen REP, ausschließlich zyklische Polymere gebildet wurden. Diese stellen neue Kandidatenmaterialien für zukünftige neue CRM dar. T2 - 22. MALDI-Kolloquium CY - Berlin, Germany DA - 15.05.2018 KW - MALDI-TOF MS KW - Polylaktid KW - Zyklen PY - 2018 AN - OPUS4-44835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lauer, Franziska T1 - Multivariate statistics applied to MALDI-TOF MS data of pollen samples N2 - A variety of new analytical approaches have been proposed in order to develop fast and reliable pollen identification using specific molecular information. The combination of the obtained patterns of pollen mass spectra (MADLI-TOF MS (Autoflex III, Bruker)) and multivariate statistics provide a powerful tool for the investigation of structural correlations within pollen grain mixtures. Both commercially available lyophilized pollen (Sigma, Germany) and fresh pollen acquired from biological samples collected in parks and in the Botanic Garden Berlin-Dahlem, were utilized. The samples were extracted based on a modified biotyper protocol (Bruker) by formic acid extraction in the gas phase and spotted with HCCA matrix. This presentation show results from the newly developed MALDI target setup, with conductive tape. The spectral data were investigated by principal component analysis (PCA). T2 - 20. MALDI-Kolloquium CY - BAM Adlershof, Berlin, Germany DA - 10.05.2016 KW - MALDI-TOF Mass Spectrometry; Multivariate statistics; Pollen PY - 2016 AN - OPUS4-36842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Characterization of co (polyamide)s N2 - Charactrization of Co(polyamide)s Molar mass distribution; Functionalization; supression of end group effects in favor of sequence distribution analysis; Evidence of of randomization with increasing reaction time T2 - Polyamide Meeting, DSM CY - Sittard, The Netherlands DA - 20.04.2018 KW - Liquid chromatography KW - Mass spectrometry of polymers PY - 2018 AN - OPUS4-44747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian T1 - Entwicklung, Validierung und Anwendung eines beschleunigten Bewitterungsprotokolls zur Bewertung der Freisetzung von Bisphenol A (BPA) aus Polycarbonat (PC)-Materialien in die Umwelt N2 - BPA unterliegt einer kontinuierlichen behördlichen Kontrolle und ist als besonders besorgniserregender Stoff (SVHC) gelistet. Besondere Besorgnis besteht hinsichtlich seines häufigen Nachweises in Oberflächengewässern, obwohl es leicht biologisch abbaubar ist. In mehreren Studien wurden die Quellen und Wege von BPA in die Umwelt untersucht, wobei festgestellt wurde, dass seine Hauptverwendung als Monomer in PC nur marginal zu den BPA-Freisetzungen in die Umwelt über seinen Lebenszyklus beiträgt. Um die tatsächlichen Freisetzungen von BPA aus PC unter umweltrelevanten Bedingungen besser zu verstehen, wurde eine neu entwickelte Methodik (Bundesanstalt für Materialforschung und -prüfung, BAM) angewendet, die ein neuartiges beschleunigtes Bewitterungsprotokoll für Polycarbonat-Materialien in Kombination mit einem sensitiven Analysenverfahren umfasst, welches eine Bestimmung von BPA im Ultraspurenbereich ermöglicht. Das Bewitterungsprotokoll erreicht eine 13,6-fache Beschleunigung im Vergleich zu mitteleuropäischen Wetterbedingungen und simuliert Umweltstressoren (globale Strahlung, Regen, Temperaturschwankungen) in einer Bewitterungskammer, wobei gleichzeitig die BPA-Freisetzung mit einem validierten LC-MS/MS-Verfahren unter Verwendung einer organischen Isotopenverdünnungskalibrierung bestimmt wird. In parallelen Freilandversuchen wurden die Trübung und die Vergilbung („Yellowness-Index“) der zu untersuchenden Proben als Referenzparameter untersucht. T2 - 54. Jahrestagung der GUS 2026 CY - Blankenloch-Stutensee, Germany DA - 25.03.2026 KW - Bewitterung KW - Bisphenol A KW - Polycarbonat PY - 2026 AN - OPUS4-65794 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Witt, Julia T1 - Electrocatalyticperformance and stabilityofmulti-principalelement alloys (MPEAs) N2 - Accurately distinguishing oxygen evolution reaction (OER) currents from anodic metal dissolution is essential for accurately evaluating metal electrocatalysts, as both processes often overlap in the transpassive potential region.1,2 This study explored multi-principal element alloys (MPEAs) as a pathway toward sustainable electrocatalysis by reducing reliance on noble and critical metals. CrCoNi and CrMnFeCoNi alloys are used as model systems to understand how complex compositions behave when OER and dissolution occur simultaneously, providing a benchmark for designing Co-reduced/free variants within the FeCrNi MPEA family. To quantitatively separate these pathways, we employ an integrated operando approach: tip-substrate voltammetry in scanning electrochemical microscopy (TSV-SECM) for spatially resolved O2 detection, ICP-MS and UV-Vis spectroscopy for dissolution quantification and chromium speciation, and in-situ electrochemical AFM (EC-AFM) to identify the onset of corrosion and track nanoscale surface evolution. Converting dissolution data into electrochemical charge enables a precise attribution of transpassive currents to either OER or metal dissolution. To further assessmass-transport effects, MPEAs were examined using rotating disk electrode (RDE) methods. Controlled hydrodynamics separate kinetic from diffusion-limited regimes and reveal how dissolution rates, passive-film behavior, and OER activity respond under flow conditions. Overall, this methodology provides a robust platform for reliably distinguishing catalytic OER performance from corrosion processes while guiding the design of next-generation electrocatalysts that minimize or eliminate Co and other critical and noble metals. Extending these insights to FeCrNi-based systems offers new opportunities for sustainable, high-performance materials capable of operating under technologically relevant anodic conditions. T2 - Materials for Sustainable Development Conference (MATSUS26) CY - Barcelona, Spain DA - 23.03.2026 KW - Multi-principal elemt alloy (MPEAs), Corrosion, Electrocatalysis, Scanning electrochemical miscroscopy (SECM) PY - 2026 AN - OPUS4-65791 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - 30 years LC-MS of synthetic macromolecules – an old story or something left to discover? N2 - Structure elucidation of complex synthetic copolymers still represents a challenge. A one-dimensional separation technique cannot give the answer to the question: What are the molar mass distribution (MMD), the functionality distribution (FTD), the chemical composition distribution (CCD), the monomer sequence distribution (MSD), the topology differences within a single broad distributed polymer sample? Is the coupling of liquid chromatographic separation techniques to mass spectrometry able to fill the gaps to a certain degree? Different LC separation techniques as size exclusion chromatography (SEC), liquid adsorption chromatography (LAC), liquid chromatography at critical conditions (LCCC) and gradient elution liquid chromatography (GELC) combined with Matrix assisted Laser Desorption Ionization (MALDI) respectively Electrospray Ionization (ESI) Time of Flight (TOF) mass spectrometry are able to give information which otherwise are completely inaccessible. In some cases, CID tandem mass spectrometry is applied. Fragmentation of suitable precursor ions resulted in typical fragment ion patterns. This technique enables an additional information on e.g. sequences, structural defects and topology of complex polymer mixtures. Often the deficiencies of stand-alone methods can be bridged. LC, blind to structural information needs mass spectrometry as one of the most powerful detectors able to give detailed information on e.g. the repeat units, functionalization or copolymer composition of the chromatographic separated constituents. A separation prior to MS reduces radical the dispersity which is one of the reasons for failing of MS. Also problems with different ionization probabilities in complex mixtures can partly be overcame. The lecture will provide a series of examples where LC-MS has been applied to evaluate complex macromolecules and mixtures of these. On- and offline coupling principles will be compared and the pros and cons of both mass spectrometric techniques will be discussed. T2 - SCM-8; International Symposium on the CY - Amsterdam, The Netherlands DA - 30.01.2017 KW - Characterization of polymers KW - HPLC KW - UPLC/ESI-TOF-MS KW - LC/MALDI-TOF-MS KW - Coupling techniques PY - 2017 AN - OPUS4-39276 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - You, Zengchao T1 - Nanoparticles separation using capillary electrophoresis N2 - Nowadays, different nanoparticles have been developed for commercial applications. However, since data on toxicity are barely available, their increasing application in cosmetic products, food and their release in the environment might cause severe problems. An accurate separation, identification and characterization of nanoparticles becomes increasingly important. A common method for nanoparticle separation, which was introduced in 1976 by Giddings, represents asymmetrical field-flow fractionation (AF4). It is a flow based separation method, which can be theoretically used to separate particles range from 1 nm to 50 µm. However, when the particles are smaller than 10 nm, separation with AF4 will become difficult to perform. Because in this case strong separation force, which induces aggregation of particles, should be applied. This will decrease recoveries of analytes and limit its application in accurate quantitative analysis. Capillary electrophoresis (CE) is another well-developed separation technique, in which samples will be separated in relation to their electrophoretic mobility. In recent years, CE has been used to separate different kinds of nanoparticles like, gold colloids or CdSe Quantum dots. However, till now only separation of particles smaller than 50 nm was reported. Because large size distribution of bigger particles will result in strong peak broadening and long separation time. A two-dimensional coupling of AF4 and CE might provide us a new separation method, which can extend the separation ranges of both methods and be a way to characterise particles with large size distributions. T2 - ESAS-CANAS Konferenz CY - Berlin, Germany DA - 21.03.2018 KW - Nanoparticles separation capillary electrophoresis asymmetrcial flow field flow fractionation PY - 2018 AN - OPUS4-47188 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Coupling techniques for copolymer characterization with focus on LC-MC T2 - ISPAC, 26th Int. Symposium on Polymer Analysis and Characterization CY - New Orleans, LA, USA DA - 2013-06-09 PY - 2013 AN - OPUS4-28631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sötebier, Carina T1 - Characterization of Ag nanoparticles: limitation and advantages of field-flow fractionation N2 - Silver nanoparticles (Ag NPs) are widely used in consumer products due to their excellent antibacterial properties. Their broad application has led to a variety of recent regulation on their use and labelling. Thus, a highly specific analytical method for their characterization and quantification is needed. Due to their large separation range, field-flow fractionation (FFF) techniques are repeatedly applied for the analysis of NP. Limitations of FFF include quantification, sample loss and insufficient recovery rates. Another challenge can be non-ideal elution behavior of particles in complex and unknown matrices. The possible sources for sample losses of Ag NP have been studied using an asymmetric flow FFF (AF4) in combination with inductively coupled plasma mass spectrometry (ICP-MS). The influence of different parameters, for example the sample concentration, on the recovery rates and sample loss has been investigated. Using laser ablation ICP-MS, the Ag deposition on the membrane was located and quantified. Our results identified ionic silver as the main sources of sample loss. These results can be useful for further method improvement. However, when a Ag NP sample containing an unknown complex matrix is analyzed, FFF method optimization is challenging as the sample might show a shift in the retention times and lower recovery rates. In this case, ICP-MS experiment in the single particle mode (sp-ICP-MS) can be a useful addition to the FFF measurement. Here, upon assumption of spherical particles, the geometric diameters can be calculated. This fast and easy approach can be helpful in order to interpret the FFF fractograms and advice the FFF method optimization process. T2 - 18th International Symposium on Field- and Flow-Based Separations CY - Dresden, Germany DA - 22.05.2016 KW - Silver KW - Nanoparticles KW - Field-flow fractionation KW - ICP-MS PY - 2016 AN - OPUS4-36352 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Synthesis of Polylactides and thier characterization by coupling of liquid chromatographic mathods with MALDI-TOF-MS T2 - 7th International Symposium on Polymers for Advanced Technologies CY - Fort Lauderdale, FL, USA DA - 2003-09-21 PY - 2003 AN - OPUS4-3542 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Ralph-Peter T1 - Calixarene in Photoresisten (Kopplung von flüssigchromatographischen Methoden mit der MALDI-TOF-MS) T2 - Fachgruppenvollversammlung BAM CY - Berlin, Germany DA - 2002-01-29 PY - 2002 AN - OPUS4-3418 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Einfluss von Feuchte und Nässe auf die Witterungs-induzierte Alterung am Beispiel eines Polyurethans N2 - Bei der Bewitterung von Polymeren kommt es auf molekularer Ebene zur Alterung, die sich in verschiedenen Eigenschaften als unterschiedlich starke Änderung äußert. Art und Geschwindigkeit dieser molekularen Alterung und die damit einhergehenden Eigenschaftsänderungen hängen dabei neben einer Reihe anderer Einflussfaktoren von der Art und Intensität der Beanspruchung ab. In diesem Beitrag soll der relative Einfluss des Wassers als Feuchte und Nässe unter den Beanspruchungsfaktoren untersucht werden. Die Unterscheidung von Luftfeuchte und Nässe bezüglich ihrer Wirkung ist dabei notwendig, weil die stehende Nässe zusätzliche Extraktionswirkung besitzt und auch die verfügbare Sauerstoffmenge beeinflusst. Dazu wurde ein Polymer, das im Rahmen des BAM-internen Projektes PolyComp untersucht wird, künstlich bewittert. Hierzu wurde ein Fluoreszenzlampengerät mit UV-A 340 nm Leuchtstoffröhren verwendet, in dessen Probenraum durch zusätzliche Kammern die gleichzeitige Bewitterung unter drei unterschiedlichen Feuchte-Varianten realisiert wurde (bei konstanter Temperatur): - UV und trocken - UV und hohe Luftfeuchte - UV und stehende Nässe. Das gleichzeitige Einwirken der einzelnen Einflussfaktoren kann dabei konkurrierende oder aufeinander folgende chemische Reaktionen und physikalische Prozesse und somit ein anderes Ergebnis bewirken, als wenn sie isoliert nacheinander auf eine Probe eingewirkt hätten. Über die erwähnten Varianten hinaus kann auch noch der spezifische Einfluss der UV-Strahlung mit untersucht werden, weil die Proben im Bereich ihrer Befestigung verdeckt sind. Die Methodik und erste Ergebnisse dieser Untersuchung werden präsentiert. T2 - 46. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) 2017 CY - Stutensee-Blankenloch bei Karlsruhe, Germany DA - 22.03.2017 KW - Polyurethan KW - TPU KW - Bewitterung KW - Feuchte KW - Nässe KW - UV PY - 2017 AN - OPUS4-39905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lauer, Franziska T1 - Artificial pollen grain mixtures analyzed with multivariate MALDI-TOF MS imaging N2 - Anemophilous plants produce pollen grains, which have to be monitored to provide an information network for persons suffering from an allergy. The current conventional characterization and identification of pollen is performed by time-consuming microscopic examinations on the basis of the genus-specific pollen shape and size. These examinations are in need of proficient researchers, are not statistically validated, and additionally rely on relatively inaccurate observations of the pollination process. A variety of new analytical approaches have been proposed in order to develop a fast and reliable pollen identification using specific molecular information. Recently, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was initially applied for the rapid investigation of such complex biological samples. The combination of the obtained patterns of pollen mass spectra and multivariate statistics provide a powerful tool for identifying taxonomic relationships. Here promising results obtained by the reduction and optimization of sample preparation prior to MALDI-TOF MS mapping are presented. Based on a novel application of conductive carbon tape as target, the signal information of the species-specific mass peak patterns of pollen was enhanced. This leads to a clear separation in a subsequent pattern analysis, which is important when analyzing pollen grains in natural species mixtures. As a proof-of-concept, artificial pollen mixtures were investigated by MALDI imaging and evaluated by innovative multivariate data analysis strategies, to assign individual pollen species in the mixtures. Our results can be used to improve the taxonomic differentiation and identification of pollen species and might be useful for the development of a routine method to identify pollen based on mass spectrometry. T2 - ANAKON 2017 CY - Tübingen, Germany DA - 03.04.2017 KW - Sample pretreatment KW - MALDI-TOF MS KW - HCA and PCA imaging KW - Pollen PY - 2017 AN - OPUS4-39989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cockx, Bastiaan J.R. T1 - From data to model, linking Knufia petricola traits to emergent biofilm properties using individual-based experiments and modelling N2 - Black fungi, a diverse group of ascomycetes, well known for their ability to thrive in extreme environments, are found to colonize and grow on subaerial surfaces where few other microbes survive. This includes bare rock as well as marble monuments and solar panels. Black fungi can deteriorate hard substrates which is of particular concern for the preservation of cultural heritage, while their ability to colonize solar panels can cause a reduction in green energy yield. We have been developing computational modelling tools to gain predictive insight into their growth and proliferation. In this work we focus on the black fungus Knufia petricola, a fungus that possesses many of the characteristic features of black fungi generally and for which genetic engineering tools have been developed. Detailed observations and systematic characterization of the organism are fundamental to developing a predictive model. We combined the lessons from individual-based and biofilm characterization studies of K. petricola by Dehkohneh et al. (Manuscripts in preparation) with the predictive potential of Individual-based Modelling (IbM). In these systematic characterization studies K. petricola was grown and characterized on agar and on a glass substrate. K. petricola was grown under a variety of conditions; different carbon and nitrogen sources, different degrees of nutrient limitation, and C:N ratios. We"ve thus gained insight on how these conditions affect the growth characteristics and morphological development of K. petricola, including how nutrient limitation can limit branch development and shift generation times, and how the C:N ratio affects substrate penetration. We employed this knowledge to develop a new K. petricola IbM.We used the IbM framework iDynoMiCS 2.0 (Cockx et al. 2024) to formulate our model. The model captures both morphological and kinetic aspects of K. petricola. By formulating characteristics of individual cells and the interactions with their neighbors and environment mathematically we can simulate emergent properties, such as the architecture and expansion of K. petricola micro- colonies, which gives us the unique ability to link microbial traits with biofilm characteristics. The model gives us insight on how environmental parameters can be manipulated to steer the development of K. petricola biofilms, it can thus help forecast K. petricola biofilm proliferation and can be used to inform new bio-colonization mitigation strategies. T2 - Annual Conference of the Association for General and Applied Microbiology (VAAM) 2026 CY - Berlin, Germany DA - 22.03.2026 KW - Rock-inhabiting fungi KW - Extreme environments KW - Fungal growth PY - 2026 AN - OPUS4-65755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -