TY - CONF A1 - Hickel, Tilmann A1 - Grabowski, B. A1 - Körmann, Fritz A1 - Menon, S. T1 - Application of density functional theory in the context of phase diagram modelling N2 - In this presentation the fundamentals of density functional theory are explained in the context of phase diagram modelling. A special focus is on the Ni-Mg phase diagram. T2 - 7th MSIT Winter School CY - Kreuth, Germany DA - 12.03.2023 KW - Ab initio simulations KW - Thermodynamics KW - Phase diagrams PY - 2023 AN - OPUS4-58855 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann A1 - Sözen, H. I. A1 - Hegde, O. A1 - Neugebauer, J. T1 - Design of finite temperature materials properties enabled by digital concepts N2 - Since the function of materials is controlled by properties and processes on the atomic scale, ab initio based high-throughput methods are valuable strategies in materials design. For computational efficiency, they are however often restriction to T=0K calculations, while many technologically relevant materials properties and thermodynamic stabilities change when going from low to high temperatures. On the other hand, the constantly increasing performance of digital tools for simulation and data-driven science enables more targeted material development including these kinds of finite-temperature effects. A flexible infrastructure, including data management and workflow solutions is required to make this symbiosis user-friendly efficient. Within this presentation, examples from ab initio thermodynamics for the design of phase stabilities in hard-magnetic alloys and defect-phases in advanced high-strength steels will be demonstrated. We will discuss physical concepts with a focus at the impact of magnetic excitations. At the same time, the examples will be used to derive requirements and present solutions for a digital infrastructure. An outlook will be given to current strategies with the NDFI initiative NFDI-MatWerk. T2 - HetSys Seminar Warwick University CY - Warwick, UK DA - 16.01.2023 KW - Digital Infrastructure KW - Workflows KW - Ab initio thermodynamics KW - Compositionally complex alloys KW - Hard magnets PY - 2023 AN - OPUS4-58856 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann A1 - Tehranchi, A. A1 - Mathews, P. A1 - Zendegani, A. A1 - Zhang, S. A1 - Scheu, C. A1 - Neugebauer, J. T1 - Constructing defect phase diagrams from ab initio calculations N2 - Thermodynamic bulk phase diagrams have become the roadmap used by researchers to identify alloy compositions and process conditions that result in novel materials with tailored microstructures. On the other hand, recent progress in experimental atomic-scale characterization techniques allows one to study the local chemical composition at individual defects such as interfaces, grain boundaries, dislocations and surfaces. They show that changes in the alloy composition can drive not only transitions in the bulk phases present in a material, but also in the concentration and type of defects they contain. Defect phase diagrams, using chemical potentials as thermodynamics variables, provide a natural route to study these chemically driven defects. Our results show, however, that the direct application of thermodynamic approaches can fail to reproduce the experimentally observed defect formation. Therefore, we extend the concept to metastable defect phase diagrams to account for kinetic limitations that prevent the system from reaching equilibrium. We use ab initio calculations based on density functional theory to quantify the extension of regions where defect formation is expected. We successfully applied this concept to explain the formation of large concentrations of planar defects in supersaturated Fe2Nb Laves phases. In addition, we identify in a joint study with experiments conditions and structures in Mg-Al-Ca alloys for defect phase occurrence. The concept offers new avenues for designing materials with tailored defect structures. T2 - Birmingham University, Seminar in physical chemistry CY - Birmingham, GB DA - 21.07.2023 KW - Atomistic models KW - Phase transitions KW - Defects PY - 2023 AN - OPUS4-58843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann A1 - Mai, H. L. A1 - Scheiber, D. A1 - Romaner, L. A1 - Cui, C. A1 - Ringer, S. A1 - Neugebauer, J. T1 - High-throughput segregation analysis at ferritic Fe grain boundaries: from first principles N2 - Understanding segregation to grain boundaries, and eventually their defect phase diagrams, is critical to enable rational grain boundary engineering for alloys design. Here, we discuss the progress and challenges one may face when generating such a database of defect-solute interactions, in the context of studying of grain boundary segregation of solutes and impurities in Fe GBs. To compute the large number of relevant defect-solute interactions we have performed high-throughput ab initio calculations using efficient and highly automated workflows using pyiron. We study has been performed across a representative set of coincident-site-lattice (CSL) type tilt GBs. Based on the large ab-initio datasets, we extract and analyse the chemical and structural trends observed in the solute segregation behaviour across the periodic table. The features which are most important in evaluating site segregation are presented and discussed. T2 - DPG Frühjahrstagung der Sektion Kondensierte Materie CY - Dresden, Germany DA - 26.03.2023 KW - Ab initio simulations KW - Defects KW - Phase diagrams PY - 2023 AN - OPUS4-58844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann A1 - Tehranchi, A. A1 - Mathews, P. A1 - Zendegani, A. A1 - Zhang, S. A1 - Scheu, C. A1 - Neugebauer, J. T1 - Ab initio Thermodynamics of defect phases in metals N2 - Thermodynamic bulk phase diagrams have become the roadmap used by researchers to identify alloy compositions and process conditions that result in novel materials with tailored microstructures. On the other hand, recent progress in experimental atomic-scale characterization techniques allows one to study the local chemical composition at individual defects such as interfaces, grain boundaries, dislocations and surfaces. They show that changes in the alloy composition can drive not only transitions in the bulk phases present in a material, but also in the concentration and type of defects they contain. Defect phase diagrams, using chemical potentials as thermodynamics variables, provide a natural route to study these chemically driven defects. Our results show, however, that the direct application of thermodynamic approaches can fail to reproduce the experimentally observed defect formation. Therefore, we extend the concept to metastable defect phase diagrams to account for kinetic limitations that prevent the system from reaching equilibrium. We use ab initio calculations based on density functional theory to quantify the extension of regions where defect formation is expected. We successfully applied this concept to explain the formation of large concentrations of planar defects in supersaturated Fe2Nb Laves phases. In addition, we identify in a joint study with experiments conditions and structures in Mg-Al-Ca alloys for defect phase occurrence. The concept offers new avenues for designing materials with tailored defect structures. T2 - 19th Int. Conference on Diffusion in Liquids and Solids CY - Heraklion, Greece DA - 26.06.2023 KW - Density functional theory KW - Defects KW - Phase diagrams KW - Mg alloys PY - 2023 AN - OPUS4-58845 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann A1 - Schaarschmidt, J. A1 - Straumal, A. T1 - The Platform MaterialDigital (PMD) and the goal of a Materials Data Space N2 - Suitable material solutions are of key importance in designing and producing components for engineering systems – either for functional or structural applications. Materials data are generated, transferred, and introduced at each step along the complete life cycle of a component. A reliable materials data space is therefore crucial in the digital transformation of an industrial branch. Therefore, the “Innovation Platform MaterialDigital (PMD) funded by the German Federal Ministry of Education and Research (BMBF), aims to develop a sustainable infrastructure for the standardized digital representation of materials science and materials engineering. With its partners (KIT, Fraunhofer IWM, FIZ, Leibnitz IWT, BAM, MPIE), the PMD is committed to build up a materials science data space. To achieve this the PMD provides a prototypical infrastructure for the digitalization of materials implemented by decentralized data servers, standardized data schemas and digital workflows. Following the FAIR principles, it will promote the semantic interoperability across the frontiers of materials classes. Standards, methods, and tools developed within the platform are deployed and consolidated within the context of currently near 20 BMBF-funded academic and industrial research consortia and made available to the material science community in general. In this context scientific workflows represent a major focus area, represented within the platform by the workflow frameworks pyiron and SimStack. In consequence, the platform is building up a digital library in form of a workflow store along with common standards for the definition and representation of digital workflows. In this presentation we will describe the status of our Platform MaterialDigital with a focus on the workflow activities. The current status and the vision for dissemination of the solutions developed in the PMD within the community are provided. T2 - 4th EMMC International Workshop 2023 CY - Vienna, Austria DA - 26.04.2023 KW - Platform MaterialDigital KW - Workflows KW - Data Management PY - 2023 AN - OPUS4-58846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann A1 - Waseda, O. A1 - Huber, L. A1 - Menon, S. A1 - Janssen, J A1 - Drautz, R. A1 - Neugebauer, J. T1 - Integration of multi-scale workflows into the pyiron IDE N2 - Material science problems have intrinsically multiscale and multiphysics characters, and require us to employ a combination of methods on different time and length scales to resolve critical features. Normally creating workflows that connect data in multiple scales and various methods is a cumbersome task. Pyiron, an integrated development environment (IDE) for material science, contains modules for the atomistic as well as continuum scale that make a seamless connection possible. To this end, it provides a high-level coherent language in a unified workflow platform to study materials, for example, with density functional theory (DFT) simulations in the same framework as with the finite element method (FEM). In this work, in addition to the introduction of different features in pyiron and its continuum module, a couple of exemplary workflows are demonstrated, bridging the scales in pyiron. One such workflow is analyzing the elastoplastic response of metallic alloys, where the elastic properties of the system are dependent on the atomistic composition and structure of the alloy. We use pyiron atomistics to model the dependence of elastic moduli on the atomistic composition of Al-Mg alloys. Benefiting from the integration of DAMASK in the continuum module of pyiron, the model can be used as an input to simulate the elastoplastic response of the alloy under various loadings. In addition, finite element simulations using the FEniCS package are currently integrated into the continuum module and will be demonstrated in the presentation. T2 - FEMS Euromat Conference 2023 CY - Frankfurt/Main, Germany DA - 03.09.2023 KW - Platform MaterialDigital KW - Workflows KW - Multiscale simulation PY - 2023 AN - OPUS4-58847 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann A1 - Sözen, H.I. A1 - Hegde, O. A1 - Janssen, J. A1 - Neugebauer, J. T1 - Design of finite temperature materials properties enabled by digital concepts N2 - Since the function of materials is controlled by properties and processes on the atomic scale, ab initio based high-throughput methods are valuable strategies in materials design. For computational efficiency, they are however often restriction to T=0K calculations, while many technologically relevant materials properties and thermodynamic stabilities change when going from low to high temperatures. On the other hand, the constantly increasing performance of digital tools for simulation and data-driven science enables more targeted material development including these kinds of finite-temperature effects. A flexible infrastructure, including data management and workflow solutions is required to make this symbiosis user-friendly efficient. Within this presentation, examples from ab initio thermodynamics for the design of phase stabilities in hard-magnetic alloys and defect-phases in advanced high-strength steels will be demonstrated. We will discuss physical concepts with a focus at the impact of magnetic excitations. At the same time, the examples will be used to derive requirements and present solutions for a digital infrastructure. An outlook will be given to current strategies with the NDFI initiative NFDI-MatWerk. T2 - FEMS Euromat Conference 2023 CY - Frankfurt/Main, Germany DA - 03.09.2023 KW - Ab initio simulations KW - Workflows KW - Chemically complex alloys KW - Hard magnetic materials KW - Thermodynamics PY - 2023 AN - OPUS4-58848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann A1 - Zendegani, A. A1 - Tehranchi, A. A1 - Hegde, O. A1 - Mathews, P. A1 - Neugebauer, J. T1 - Constructing defect phase diagrams from ab initio calculations N2 - Thermodynamic bulk phase diagrams have become the roadmap used by researchers to identify alloy compositions and process conditions that result in novel materials with tailored microstructures. Recent experimental studies show that changes in the alloy composition can drive not only transitions in the bulk phases present in a material, but also in the concentration and type of defects they contain. Defect phase diagrams in combination with density functional theory provide a natural route to study these chemically driven defects. Our results show, however, that direct application of thermodynamic approaches can fail to reproduce the experimentally observed defect formation. Therefore, we extend the concept to metastable defect phase diagrams to account for kinetic limitations that prevent the system from reaching equilibrium. We successfully applied this concept to explain the formation of large concentrations of planar defects in supersaturated Fe-Nb solid solutions and to identify in a joint study with experiments conditions in Mg-Al-Ca alloys for defect phase occurrence. The concept offers new avenues for designing materials with tailored defect structures. T2 - Fritz-Haber-Institut Seminar CY - Berlin, Germany DA - 23.03.2023 KW - Ab initio simulations KW - Defects KW - Phase diagrams PY - 2023 AN - OPUS4-58849 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hickel, Tilmann A1 - Tehranchi, A. A1 - Neugebauer, J. T1 - Hydrogen enhances cross-slip of dislocations in the vicinity of grain boundaries N2 - Extensive experimental observations indicate the presence of nano-voids and the increase of free volume along the grain boundaries in hydrogen contaminated metals. This rate-dependent phenomenon motivates theoretical investigations of the underlying mechanisms. Here, a hydrogen enhanced cross-slip (HECS) mechanism in the close vicinity of the grain boundaries is demonstrated by direct molecular dynamics simulations. To this end, the interaction of the screw dislocations with a variety of symmetric tilt grain boundaries in H-charged and H-free bicrystalline nickel specimens is examined. The presence of segregated hydrogen atoms at the grain boundaries induces a stress field in their vicinity, and thus the barrier for cross-slip of screw dislocations considerably decreases. The enhanced crossslip of dislocations facilitates the formation of jogs. These jogs can form vacancies during the glide process. This mechanism shows nano-scale evidence of enhanced vacancy formation and subsequent increase in the free volume along the grain boundaries in the presence of H. This increase of the free-volume along the grain boundary dmaages the material and induce further embrittlement in addition to the direct effect of hydrogen in decreasing the fracture energy. T2 - International hydrogen conference 2023 CY - Park City, Utah, USA DA - 17.09.2023 KW - Atomistic model KW - Hydrogen embrittlement KW - Dislocation cross slip KW - Hydrogen enhanced vacancy formation PY - 2023 AN - OPUS4-58850 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -