TY - CONF A1 - Woydt, Mathias T1 - Tailoring the functional properties of niobium carbide N2 - Several phases, like Nb₄C₃, Nb₆C₅ and other short and long range ordered phases occur in the region of homogeneity of NbCₓ (0,75≤ x ≤1.0) in the binary phase diagram. Properties, like micro-hardness, hot hardness, sliding wear resistance, elastic modulus and toughness can be tailored by the C/Nb ratio, the addition of secondary carbides and the type of binder. Supporting results from different grades with varying C/Nb ratio or binder types were illuminated. Thus, the NbC system offers to producers a wider process window, than WC. The impact of These tailored properties on sliding wear and cutting performance was illuminated by tribological and machining results. Niobium is today largely available. NbC can be synthesized by carbothermal conversion of Nb₂O₅ or be metallurgically grown and leached out, provides comparably low friction in many relevant tribo-contacts and displays low wear. NbC and Nb₂O₅ have so far no REACH classification related to human toxicology and are not listed as substances of very high concern contrary to WO₃ and Co₃O₄. T2 - 40th International Conference and Exposition on Advanced Ceramics and Composites CY - Daytona Beach, FL, USA DA - 24.01.2016 KW - Niobium carbide KW - Hard metal KW - Wear KW - Friction KW - Machining KW - Cutting KW - Metal matrix composite PY - 2016 SP - Paper: 2347292, 1 EP - 13 AN - OPUS4-35640 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Cheng-Chieh T1 - Inverse finite element adjustment of material parameters from integrated analysis of displacement field measurement N2 - The integration of finite element method (FEM) into the least-squares adjustment presented in is further extended for a joint evaluation of an elastostatic model and displacement field measurement. For linear solids which obey the Hooke's law, the material parameters determination from measurements is being examined. T2 - 32nd Danubia-Adria Symposium on advances in experimental mechanics CY - Starý Smokovec, Slovakia DA - 22.09.2016 KW - Integrated analysis KW - Inverse problem KW - Finite element method KW - Least-squares adjustment KW - Model and measurement based analysis PY - 2015 AN - OPUS4-35648 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die neue Technologie-Roadmap "Prozess-Sensoren 4.0" - Chancen für neue Automationskonzepte N2 - Vorstellung der neuen Technologie-Roadmap "Prozess-Sensoren 4.0" T2 - Sitzung des AMA-Wissenschaftsrates CY - Saarbrücken, Germany DA - 16.03.2016 KW - Roadmap KW - Prozess-Sensoren 4.0 KW - Sensoren KW - Industrie 4.0 PY - 2016 AN - OPUS4-35716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bierstedt, Andreas T1 - Development of a laser induced plasma ion source coupled to ambient mass spectrometry N2 - Only a few years after the invention of the laser, the concept of laser microprobe mass spectrometry (LMMS), a technique which employed intense laser radiation for ion generation, was introduced. In these early studies at excessive irradiation microplasma formation could be observed to be an effective channel for ion formation. However, this plasma generation in vacuum led to undesired distortions of the mass analyzers and, thus, was discarded as an analytical ion source. Under ambient conditions, the surrounding air effectively cools the plasma cloud, making the plasma more controllable. The resulting laser induced plasma is nowadays commonly used in laser induced breakdown spectroscopy (LIBS) applications as excitation source for optical emission spectroscopy experiments. However, little effort has been made to introduce a LIBS plasma as a promising ion source for ambient mass spectrometry. The main hindrance is the transient character of laser induced plasmas that typically only has a lifetime on the order of several microseconds. This drastically reduces the duty cycle of these plasma sources. After these microseconds, the generated ions recombinate to uncharged atoms and even newly bound molecules, making them inaccessible to mass-to-charge analyzers. The advent of high repetition lasers together with the ever growing knowledge about manipulation of charged species at atmospheric pressures allow overcoming these obstacles. This presentation will introduce an ionization scheme using a laser induced plasma as the primary ion source. We believe that this novel ionization strategy will pave the way for future applications in ambient mass spectrometry. T2 - 5. Berliner Chemie Symposium CY - Berlin, Germany DA - 12.04.2016 KW - Laser induced plasma KW - Time-of-flight mass spectrometry KW - Ambient mass spectrometry KW - Ionization KW - Laser induziertes Plasma KW - Flugzeitmassenspektrometer KW - Atmosphärendruckmassenspektrometrie KW - Ionisierung PY - 2016 AN - OPUS4-35732 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschaikner, Martin T1 - Laminographic inspection of large fibre composite structures at the production site N2 - Short describtion of the technology and results of laminography. T2 - 7th International Symposium on NDT in Aerospace CY - Bremen, Germany DA - 16.11.2015 KW - Laminography KW - 3D Reconstruction KW - Inspection of CFRP KW - Laminografie KW - 3D Rekonstruktion KW - Untersuchung von CFK PY - 2015 AN - OPUS4-35610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Research activities at BAM related to extended spent fuel and HLW storage N2 - This presentation starts with a brief overview about the current situation of spent nuclear fuel and high level waste storage in Germany followed by a discussion of the expected timeline towards final disposal. Furthermore an overview is presented about research programmes for radioactive waste disposal and also extended interim storage issues due to the delay of the national repository siting procedure. In the second part of the presentation BAM research activities related to extended interim storage are addressed. This includes the status and preliminary results of proactive R&D projects concerning metal seals, degradation effects of polymers used as neutron shielding materials and finally elastomer seals. T2 - RIC 2016 - 28th Annual regulatory information conference CY - North Bethesda, Maryland, USA DA - 08.03.2016 KW - Spent Fuel KW - Extended interim storage KW - Radioactive waste KW - Degradation effects PY - 2016 UR - https://ric.nrc-gateway.gov/docs/abstracts/volzkeh-w22-hv.pdf AN - OPUS4-35614 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Safety demonstrations with regard to extended interim storage N2 - This presentation addresses safety aspects concerning dual purpose casks for transportation and storage of spent fuel and high level radioactive waste. The long term performance of casks and their safety relevant components like sealed lid systems and the long term performance of cask internals, especially spent fuel assemblies are discussed. Transportation after interim storage is another key issue and due to the fact of delayed disposal projects current interim storage periods need to be extended causing additional safety demonstration needs for longer periods of time. Regarding this situation present BAM research activities in this area and their preliminary outcomes are presented. T2 - 5. RAM-Behältersicherheitstage CY - Berlin DA - 16.03.2016 KW - Interim storage KW - Radioactive waste KW - Spent fuel KW - Safety PY - 2016 AN - OPUS4-35615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Progress in using geophysical methods for foundation quality assurance and inspection N2 - Modern geophysical methods might be either directly applied to foundations or integrated into existing testing schemes to assist in quality assurance and inspections. This paper gives an overview on available ideas and some more detailed examples from the author `s work including: - Vibrator technologies to improve pile integrity testing. - Ideas from vertical seismic profiling used in multichannel pile inspection - Cross- and downhole seismics to check the diameter of jet grouting columns - Improving the parallel seismic methods for precise length measurement of piles and foundation walls  Seismic migration methods to improve ultrasonic imaging of foundation slabs  Seismological tools to monitor subtle changes in concrete constructions The author strongly believes that the cooperation between geophysics and civil engineering, which is obviously becoming stronger and stronger, will lead to a large number of innovative approaches for investigations tasks currently still unresolved. A lot of challenges and chances for science and technology are right here. T2 - SAGEEP 2016 CY - Denver, CO, USA DA - 20.03.2016 KW - Non-destructive testing KW - Piles, foundations KW - Slabs KW - Parallel seismic KW - Vibrator KW - Integrity PY - 2016 AN - OPUS4-35706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Innovative seismic and resistivity tools for determining the diameter of jet grouting columns N2 - Jet grouting is used for soil improvement, foundation support and groundwater low control all over the world. It is well accepted and subject of standardization in many countries. However, some issues with the method remain. As the grout columns are produced in the subsurface without visual control in an often inhomogeneous soil, the prediction of the column’s diameter is still a challenge. All methods applied so far have their limitations. The approach presented in this study is twofold. At Colorado School of Mines a resistivity probe has been developed, which is pushed into the fresh grout directly after production. ERT sections are measured and inverted. Given some background information is available, the diameter of the columns can be evaluated. At BAM the focus has been on post-production investigations using seismic borehole methods. After hardening of the concrete seismic waves are sent through the column downhole (sensors placed in a casing in the column’s axis, source on top) and crosshole (source and sensor in boreholes on opposite sides of the column). We have developed a scheme to evaluate the diameter of the column based on travel time measurements without calibration. As this method is eventually more time and cost intensive we assume its application mainly for test columns. These are casted and dug out for visual inspection to determine appropriate grouting parameters. Our method would replace the often very cost intensive visual inspection. Both approaches have been tested at three test columns produced at BAM’s test site at Horstwalde, Germany and on an actual constructions site. Both methods have been in good agreement with the diameters predicted by the jet grouting contractors, which were confirmed in one case by mechanical measurements. T2 - SAGEEP 2016 CY - Denver, CO, USA DA - 20.03.2016 KW - Jet grouting KW - Diameter KW - Quality assurance KW - Seismic PY - 2016 AN - OPUS4-35708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die neue Technologie-Roadmap „Prozess-Sensoren 4.0“ – Chancen für neue Automationskonzepte N2 - Derzeit finden gravierende Veränderungen im Umfeld der Informations- und Kommunikationstechnik statt, die eine große Chance für die optimierte Prozessführung und Wertschöpfung mit darauf abgestimmten vernetzt kommunizierenden Sensoren bieten. Diese Art „smarte“ Sensoren stellen Dienste innerhalb eines Netzwerks bereit und nutzen Informationen daraus. Dieses ist die Voraussetzung für die Realisierung von Cyber Physical Systems (CPS) innerhalb zukünftiger Automatisierungskonzepte für die Prozessindustrie, wie sie auch durch das Zukunftsprojekt „Industrie 4.0“ adressiert werden. Initiiert von NAMUR und VDI/GMA und unter Mitwirkung der Unternehmen ABB, BASF, BTS, Bilfinger Maintenance, Endress+Hauser, Evonik, Festo, Krohne, Lanxess, Siemens, des Fraunhofer ICT, der HS Reutlingen und der BAM (Projektleitung) entstand jetzt die grundlegend aktualisierte und überarbeitete Technologie-Roadmap „Prozess-Sensoren 4.0“, die am 06. November 2015 auf der NAMUR-Hauptsitzung in Bad Neuenahr wurde. T2 - Sitzung des fms/ProcessNet-Gemeinschafts-Ausschusses „Sensoren und Sensorsysteme“ CY - Frankfurt am Main, Germany DA - 28.01.2016 KW - Roadmap KW - Prozess-Sensoren 4.0 KW - Sensoren KW - Industrie 4.0 PY - 2016 AN - OPUS4-35715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Werner, Jan A1 - Heming, Frank A1 - Jochems, Frank T1 - Impact of biocomponents in the fuel and heating oil on the compatibility of sealing materials N2 - The objective of this research was to determine the resistance of frequently used sealing materials such as FKM, FVMQ, VMQ, EPDM, CR, CSM, IIR, PA, NBR and PUR in fuels and heating oil with and without admixtures of biogenic sources such as E10, diesel fuel with 5 % biodiesel, non-aged and 2 year aged B10 (heating oil with 10 % biodiesel), pure diesel, standard heating oil and premium grade fuel Super plus at 20 °C, 40 °C and 70 °C. Mass, tensile strength and breaking elongation of the test specimens were determined before and after the exposure for 84 days in the fuels. The visual examination of some elastomer test specimens clearly showed the great volume increase until break or partial dissolution. Shore hardness A and D (for PA) were determined before and after exposure of the test specimens in the biofuels for 42 days. There is not determined a threshold for the reduction in tensile properties and Shore hardness in the international standards. Therefore a threshold of 15 % was determined for the evaluation of the compatibility. In summary, it can be therefore stated that the chemical resistance of the fluoropolymers FKM and FVMQ in fuels and biofuels is the best one. T2 - CORROSION 2016 CY - Vancouver, Kanada DA - 06.03.2016 KW - compatibility KW - sealing materials KW - biofuels PY - 2016 AN - OPUS4-35623 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Hoffmann, Gabi T1 - Schadensursachen an Rohrleitungen N2 - Das Gefährdungspotential von Rohrleitungen hängt primär von den Eigenschaften des durchfließenden Stoffes, den Betriebsbedingungen und den äußeren Beanspruchungen ab. Zu den Hauptschadensursachen an Rohrleitungen zählen Korrosion, Druckstöße und Kavitationsschläge, Zeitstandbeanspruchung, struktur- und fluidmechanische Schwingungen, Fremdberührungen, elektrische Fremdbeeinflussung und geologische Besonderheiten im Bereich des Rohrleitungsverlaufes. T2 - Workshop:Anwendung der verteilten akustischen und faseroptischen Sensorik zur kontinuierlichen Überwachung von Rohrleitungen CY - Berlin DA - 01.03.2016 KW - Korrosion KW - Zeitstandbeanspruchung KW - Struktur- und fluidmechanische Schwingungen KW - Elektrische Fremdbeeinflussung PY - 2016 AN - OPUS4-35624 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Bestimmung der Korrosionsbeständigkeit nichtrostender Stähle durch die Verarbeiter T2 - Praktikertagung im Metallhandwerk - Fachgerechte Auswahl und Verarbeitung von Edelstahl Rostfrei CY - Kaiserslautern, Germany DA - 2014-03-06 PY - 2014 AN - OPUS4-30319 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braun, Ulrike T1 - Molekulare Effekte von Alterungsreaktionen: Korrelation zu realen Proben T2 - Alterung von Polymerwerkstoffen und -bauteilen CY - Munich, Germany DA - 2014-02-26 PY - 2014 AN - OPUS4-30304 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe T1 - Multiple-sample Approach: Reliable Ranking and Validated Statistics of Bonding and Adhesive Strength T2 - EURADH 2014 CY - Alicante, Spain DA - 2014-04-22 PY - 2014 N1 - Geburtsname von Kittler-Packmor, Kai: Kittler, K. - Birth name of Kittler-Packmor, Kai: Kittler, K. AN - OPUS4-30305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dorgerloh, Ute T1 - Stabillisierung von Grundwasserproben zur Bestimmung organischer Inhaltsstoffe T2 - Altlastensymposium 2014 CY - Fulda, Germany DA - 2014-03-19 PY - 2014 AN - OPUS4-30286 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holm, Olaf T1 - Metal Recovery from Incineration Residues T2 - Advanced Recycling Technologies CY - Berlin, Germany DA - 2014-01-22 PY - 2014 AN - OPUS4-30326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver T1 - Klärschlammaschen - Potential zur Rohstoffrückgewinnung T2 - Diskussionsrunde Phosphorhaltige Klärschlammaschen CY - Frankfurt am Main, Germany DA - 2014-02-19 PY - 2014 AN - OPUS4-30328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver T1 - Phosphorrückgewinnung aus Klärschlammaschen T2 - Diskurs zum Eckpunktepapier "Beendigung der landwirtschaftlichen Klärschlammverwertung in Niedersachsen" CY - Hanover, Germany DA - 2014-03-13 PY - 2014 AN - OPUS4-30329 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Selleng, Christian T1 - Thermale Nachbehandlung von faserbewehrtem UHPC T2 - Workshop der DMG.Sektionen AMITU und CPKM CY - Bad Windsheim, Germany DA - 2014-02-26 PY - 2014 AN - OPUS4-30334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meinel, Dietmar T1 - Computertomographie T2 - Arbeitskolloquium zum Projekt Römische Großbronzen am UNESCO Welterbe Limes CY - Bonn, Germany DA - 2014-04-11 PY - 2014 AN - OPUS4-30335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheidemann, Robert T1 - Model-Sized and Full-Scale Dynamic Penetration Tests on Damping Concrete T2 - 17th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2013 CY - San Francisco, CA, USA DA - 2013-08-18 PY - 2013 AN - OPUS4-30276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Musolff, André T1 - Experimental Investigation of RAM Packages Impact Limiters T2 - Waste Management Conference 2014 (WM2014) CY - Phoenix, AZ, USA DA - 2014-03-02 PY - 2014 AN - OPUS4-30277 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Auster, Jürgen T1 - Leakage Testing During Lateral Displacement of Metallic Seals Under Mechanical Accident Impact T2 - 17th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2013) CY - San Francisco, CA, USA DA - 18.08.2013 PY - 2013 AN - OPUS4-30278 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Stephan T1 - Hapten design for the production of monoclonal antibodies against Diclofenac T2 - 8. Interdisziplinäres Doktorandenseminar der GDCh CY - Berlin, Germany DA - 2014-02-23 PY - 2014 AN - OPUS4-30280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schallschmidt, Kristin T1 - Versuch zur olfaktorischen Diskriminierung der Lungenkrebszelllinie A549 durch Honigbienen T2 - 8. Interdisziplinäres Doktorandenseminar CY - Berlin, Germany DA - 2014-02-23 PY - 2014 AN - OPUS4-30285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seuthe, T. T1 - Femtosecond-laser induced structural changes of silicate glasses investigated by µ-Raman spectroscopy T2 - 1st Joint Meeting of the German Society of Glass Technology (DGG) and the Glass & Optical Materials Division Annual Meeting (ACerS GOMD) CY - Aachen, Germany DA - 2014-05-25 PY - 2014 AN - OPUS4-30306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Staude, Andreas T1 - Making Use of Phase-Contrast in Dimensional uCT-measurements of Weakly Absorbing Objects T2 - Conference on Industrial Computed Tomography (ICT) CY - Wels, Austria DA - 2014-02-25 PY - 2014 AN - OPUS4-30307 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mermillod-Blondin, A. T1 - Quantitative estimate of laser-induced refractive index changes in the bulk of various transparent materials T2 - SPIE Photonics Europe, Optical Micro- and Nanometrology conference CY - Brussels, Belgium DA - 2014-04-15 PY - 2014 AN - OPUS4-30308 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meinel, Dietmar T1 - Examination of Damage Processes in Concrete with CT T2 - Conference on Industrial Computed Tomography (ICT) CY - Wels, Austria DA - 2014-02-25 PY - 2014 AN - OPUS4-30310 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Saalfrank, P. T1 - Theoretical NEXAFS investigation of structural defects in graphene: A density functional theory study T2 - Scattering of Atoms and Molecules from Surfaces - SAMS-2 CY - Potsdam, Germany DA - 2013-11-04 PY - 2013 AN - OPUS4-30311 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas T1 - Hochempfindliche Detektion von Gasen mittels SPR-Sensoren mit ellipsometrischen Messprinzip T2 - EFDS-Workshop "Analyse von Spurenverunreinigungen auf Oberflächen und in Gasen" CY - Dresden, Germany DA - 2013-12-02 PY - 2013 AN - OPUS4-30312 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas T1 - Accurate determination of film thickness and optical constants with ellipsometry T2 - Congrès International de Métrologie CY - Paris, France DA - 2013-10-07 PY - 2013 AN - OPUS4-30313 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas T1 - Vergleichbarkeit, Zuverlässigkeit und Genauigkeit der Bestimmung von Schichtdicken und optischen Konstanten mit Ellipsometrie an nicht-idealen Proben T2 - Seminar Messunsicherheit, PTB Berlin CY - Berlin, Germany DA - 2013-03-20 PY - 2013 AN - OPUS4-30314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - The use of niobium carbide (NBC) as cutting tools and for wear resistant tribosystems T2 - 10. Int. Conf. on the Science of Hard Materials CY - Cancún, Mexico DA - 2014-03-10 PY - 2014 AN - OPUS4-30336 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Limits in the determination of mechanical properties of composites by off-axis tests T2 - European SAMPE Conference CY - Paris, France DA - 2014-03-10 PY - 2014 AN - OPUS4-30337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Höhne, Robert T1 - A multiplex microarray for environmental analysis T2 - Advances in Microarrays CY - Berlin, Germany DA - 2014-03-10 PY - 2014 AN - OPUS4-30339 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Höhne, Robert T1 - Parallel analysis of micropollutants in water samples T2 - 8. Interdisziplinäres Doktorandenseminar CY - Berlin, Germany DA - 2014-02-23 PY - 2014 AN - OPUS4-30340 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bierkandt, Frank T1 - Quantitative Analyse der Silbernanopartikelaufnahme durch Zellen mittels LA-ICP-MS T2 - Anwendertreffen Plasmaspektrometrie 2014 CY - Hamburg, Germany DA - 2014-02-11 PY - 2014 AN - OPUS4-30363 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, R. T1 - Substrate screening with MeCAT - A comparison of strategies for relative protein quantification T2 - DGMS 2014 CY - Frankfurt am Main, Germany DA - 2014-03-02 PY - 2014 AN - OPUS4-30364 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Mechanischer Explosionsschutz - mechanisch erzeugte Funken als Zündquelle T2 - Ausbildung zum Explosionsschutzbeauftragten (Veranst.-Nr.: H050-02-332-4) CY - Hamburg, Germany DA - 2014-02-18 PY - 2014 AN - OPUS4-30352 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Mechanischer Explosionsschutz - mechanisch erzeugte Funken als Zündquelle T2 - Ausbildung zum Explosionsschutzbeauftragten (Veranst.-Nr.: H050-01-088-4) CY - Essen, Germany DA - 2014-01-21 PY - 2014 AN - OPUS4-30353 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - Konformitätsbewertung mechanischer Ex-Betriebsmittel T2 - 39. Heilbronner Ex-Schutz-Seminar "Planen, Errichten und Betreiben von Anlagen in explosionsgefährdeten Betriebsstätten - Ex-Schutz mechanischer Geräte" CY - Heilbronn, Germany DA - 2014-02-19 PY - 2014 AN - OPUS4-30355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne T1 - Brand- und Explosionsgefahren von nanoskaligen Metallstäuben T2 - Jahrestreffen der ProcessNet-Fachgruppe "Agglomerations- und Schüttguttechnik" mit Beteiligung der Fachgemeinschaft "Anlagen- und Prozesssicherheit" CY - Magdeburg, Germany DA - 2014-03-10 PY - 2014 AN - OPUS4-30445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Wechselwirkende KW- und Peroxid-Poolfeuer T2 - Sitzung ProcessNet Arbeitsausschuss "Reaktionstechnik sicherheitstechnisch schwieriger Prozesse" CY - Darmstadt, Germany DA - 2014-03-11 PY - 2014 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. AN - OPUS4-30447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Identifizierung gefährlicher exotherm zersetzlicher Stoffe T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Germany DA - 2014-03-24 PY - 2014 AN - OPUS4-30448 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulte, Petra T1 - Physikalische Gefahren: Einstufungskriterien, Prüfmethoden, Vergleich mit Transportvorschriften T2 - Volkswagen Group Academy: Basisseminar "GHS: Einstufung und Kennzeichnung" CY - Wolfsburg, Germany DA - 2014-03-26 PY - 2014 AN - OPUS4-30449 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gemeinert, Marion T1 - Glanzmessungen an Aufglasur-Dekoren auf Porzellan T2 - Jahrestagung der Deutschen Keramischen Gesellschaft 2014 CY - Clausthal-Zellerfeld, Germany DA - 2014-03-24 PY - 2014 AN - OPUS4-30391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brandes, E. T1 - Ringversuch zur Zündtemperaturbestimmung 2012/2013 T2 - DIN Normausschuss Sicherheitstechnische Grundsätze, 9. Sitzung des NA 095-02-09 AA CY - Berlin, Germany DA - 2014-03-13 PY - 2014 AN - OPUS4-30414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate T1 - Ultraschallprüfköpfe zur Ankopplung über Luft auf der Basis von Ferroelektreten T2 - Workshop "Innovative ZfP mit bildgebender Ultraschallprüftechnik" CY - Braunschweig, Germany DA - 2014-03-14 PY - 2014 AN - OPUS4-30426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -