TY - CONF A1 - Woydt, Mathias T1 - Standardization as a key tool to validate tribological test procedures T2 - International Tribology Conference/ITC 2015 CY - Tokyo, Japan DA - 2015-09-15 PY - 2015 AN - OPUS4-34320 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Hardmetals by using niobium carbides (NbC) of different stoichiometry and process routes for wear protection T2 - International Tribology Conference/ITC 2015 CY - Tokyo, Japan DA - 2015-09-15 PY - 2015 AN - OPUS4-34321 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Interrupted-milling and hard-turning of steel alloys using WC and NbC cemented carbides produced by PECS and LPS T2 - International Tribology Conference/ITC 2015 CY - Tokyo, Japan DA - 2015-09-15 PY - 2015 AN - OPUS4-34322 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf T1 - Ceramics and DLC - influence of tribochemistry on sliding under lubricated conditions at elevated temperatures T2 - Satelite Symposium on Tribochemistry CY - Nikko, Japan DA - 2015-09-13 PY - 2015 AN - OPUS4-34325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hohberg, Michaela T1 - Production process and characterization of sensitized all elastomeric POF T2 - The 24th International Conference on Plastic Optical Fibers (POF 2015) CY - Nuremberg, Germany DA - 2015-09-22 PY - 2015 AN - OPUS4-34326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siebler, Daniel T1 - A new generation of all-elastomeric fluorescent POF for sensor applications N2 - We present fundamentals for the selection of fluorescent dyes and show the challenges of the implementation of fluorescent dyes in silicone rubber materials for the production of fluorescent all-silicone rubber POF. T2 - 24th International Conference on Plastic Optical Fibers (POF 2015) CY - Nuremberg, Germany DA - 22.09.2015 KW - Sensor application KW - Elastomeric polymer optical fiber KW - Covalently bonded fluorescent KW - Dye KW - Silicone rubber PY - 2015 AN - OPUS4-34327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siebler, Daniel T1 - Optical-only detection of partial discharge with fluorescent polymer optical fiber sensors T2 - Eurosensors 2015 CY - Freiburg, Germany DA - 2015-09-06 PY - 2015 AN - OPUS4-34328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröter, Maria-Astrid T1 - Bridging the scales: Direct SEM imaging of nanometer vibrations for the analysis of stick-slip behaviour at microscales T2 - EGU 2012 CY - Vienna, Austria DA - 2012-04-22 PY - 2012 AN - OPUS4-34330 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin-Sanchez, Pedro Maria T1 - Quantitative PCR Assays for Monitoring Microorganisms Associated with Biodeterioration Cases T2 - XXV Spanish Microbiology Society Congress CY - Logrono, Spain DA - 2015-07-06 PY - 2015 AN - OPUS4-34255 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - Annual Report of SC V A "Radiography-based weld inspection" T2 - Annual Assembly of the International Institute of Welding 2015 CY - Helsinki, Finland DA - 2015-06-29 PY - 2015 AN - OPUS4-34562 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönhals, Andreas T1 - Influence of a nanoscale confinement on the dynamics of a discotic liquid crystal T2 - Neutron Scattering on Nano-Structured Soft Matter: Synthetic- and Bio.Materials CY - Tutzing, Germany DA - 2015-10-05 PY - 2015 AN - OPUS4-34569 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - BEGLARES II Protection and Restoration of Monumental Concrete-glazing with Cathodic Protection Systems T2 - 9th Forum for the conservation and technology of historic stained-glass CY - Paris, Frankreich DA - 2015-07-08 PY - 2015 AN - OPUS4-34571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - A NDT in Civil Engineering Software for Multiple Testing Methods T2 - International Conference of NDE/NDT for Highways and Bridges, Structural Materials Technology (SMT) CY - Oakland, CA, USA DA - 2008-09-08 PY - 2008 AN - OPUS4-34574 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Orrin-Seemann, Daniel T1 - Strain-based failure criterion for on-site risk evaluation for pressure vessels T2 - Erste Sitzung der Arbeitsgruppe Simulation des DVM-Arbeitskreises "Bauteilsicherheit und Bruchmechanik" CY - Kassel DA - 2015-10-06 PY - 2015 N1 - Geburtsname von Orrin-Seemann, Daniel: Seemann, D. - Birth name of Orrin-Seemann, Daniel: Seemann, D. AN - OPUS4-34575 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Qiao, Linan T1 - Crushable Foam Model with Pressure and Stress-triaxiality Dependent Damage Mechanisms for Damping Concrete T2 - International Symposium Brittle Matrix Composites BMC-11 CY - Warsaw, Poland DA - 2015-09-28 PY - 2015 AN - OPUS4-34603 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Influencing factors on the inspection performance of wheel axle sets under training conditions T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34588 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yin, Huajie T1 - Thermal and Dynamic Glass Transition of Ultrathin Films of Homopolymers and Their Blends T2 - 27th GCCCD Annual Conference CY - Jena, Germany DA - 2015-08-28 PY - 2015 AN - OPUS4-34589 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hentrich, D. T1 - Monolayer-controlled biomimetic calcium phosphate mineralization: effect of a cholesterol-based Newkome amphiphile T2 - Ostwald Kolloquium CY - MPI-KGF Potsdam, Germany DA - 2015-09-28 PY - 2015 AN - OPUS4-34590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina T1 - New challenges for the quantification of the NDT reliability T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija T1 - Safety and organizational culture in NDT matter T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Influence of stoichiometry and processing on the tribological profile of hardmetals based on niobium carbide (NbC) T2 - International Conference on Powder Metallurgy & Particulate Materials CY - San Diego, USA DA - 2015-05-17 PY - 2015 AN - OPUS4-34640 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - The background for the use of hard metals and MMCs based on Niobium Carbide (NbC) as cutting tools and for wear resistant tribosystems T2 - International Conference on Stone and Concrete Machining (3rd ICSCM) CY - Bochum, Germany DA - 2015-11-02 PY - 2015 AN - OPUS4-34641 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Advanced NDT methods for the assessment of concrete structures T2 - International Conference on Concrete Repair, Rehabilitation and Retrofitting ICCRRR 2008 CY - Cape Town, South Afrika DA - 2008-11-24 PY - 2008 AN - OPUS4-34555 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Praktische Anwendung zerstörungsfreier Prüfverfahren an Brücken T2 - 1. Brückenkolloquium an der TA Esslingen CY - Ostfildern, Deutschland DA - 2015-06-24 PY - 2015 AN - OPUS4-34557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - New Approach for Training in Digital Industrial Radiology considering ISO 9712:2012 and the IAEA guideline T2 - COTEQ 2015 Brasilien CY - Salvador, Pernambuco, Brasil DA - 2015-06-15 PY - 2015 AN - OPUS4-34558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - Neue ISO-Standards für die radiographische Schweißnahtprüfung mit Film oder digitalen Detektoren - DIN EN ISO 17636 T2 - Sitzung des DGZfP-Arbeitskreises Halle/Leipzig and er SLV Halle CY - Halle, Germany DA - 2015-04-22 PY - 2015 AN - OPUS4-34559 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - Filmersatz in der Radiographie und neue Regelwerke für Schweißnähte, Gussbauteile und Rohraufnahmen T2 - Sitzung des DGZfP-Arbeitskreises Siegen CY - Freudenberg, Germany DA - 2015-02-24 PY - 2015 AN - OPUS4-34560 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - Recent requirements for Digital Radiography Substituting Film in different Industries and Standard Organizations T2 - Symposium on Digital Industrial Radiology 2015 CY - Ghent, Belgium DA - 2015-06-22 PY - 2015 AN - OPUS4-34561 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiel, Erik T1 - Advanced thermographic testing using DLP Technology T2 - 10th International Symposium on Emerging on Emerging and Idustrial DLP Technology Applications CY - Mainz DA - 2015-10-07 PY - 2015 AN - OPUS4-34625 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steckenmesser, D. T1 - Phosphorrecycling mittels einer Kombination aus Niedertemperaturkonvertierung und thermochemischer Nachbehandlung von Klärschlamm T2 - Jahrestagung der Deutschen Bodenkundlichen Gesellschaft (DGB) CY - München, Deutschland DA - 2015-09-05 PY - 2015 AN - OPUS4-34627 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - Die neue Herstellerrichtlinie 2014/34/EU T2 - 10. Tag des Explosionsschutzes CY - München DA - 2015-10-13 PY - 2015 AN - OPUS4-34632 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina T1 - Holistic Assessment of the Reliability of NDE T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34594 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanzler, Daniel T1 - How much information do we need? A reflection on the correct use of real defects in POD evaluations T2 - 6th European-American Workshop in Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34595 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gianneo, A. T1 - PAUT Inspection of Copper Canister: Structural Attenuation and POD Formulation T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34596 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holstein, R. T1 - How NDT is organized - Influence on the Reliability of NDE T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holstein, R. T1 - Basic considerations about reliability in testing railway axles T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34598 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija T1 - Inspection Procedure in the Context of the Usability Framework - Human Factors Approach T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Léonard, Fabien T1 - Use of distance transforms and correlation maps for advanced 3D analysis of impact damage in composite panels T2 - 2nd International Conference on Tomography of Materials and Structures CY - Quebec, Canada DA - 2015-06-29 PY - 2015 AN - OPUS4-34600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate T1 - Luftultraschallprüfung von CFK mit senkrechter Einschallung und Schrägeinschallung T2 - DACH-Jahrestagung 2015 CY - Salzburg (Österreich) DA - 2015-05-11 PY - 2015 AN - OPUS4-34601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Transformatoren, Netzteile und USV - Stand und Überwachung der EU-Verordnungen N2 - Zusammenfassung des Ökodesigns, Berichterstattung über den Stand der EU-Verordnungen, der diesbezüglichen Marktüberwachungstätigkeiten und Überblick über aktuelle Diskussionen bei der europäischen Kommission über Produktprüfungen von Industriegütern. T2 - Jahrestagung des ZVEI - Zentralverband Elektrotechnik- und Elektronikindustrie CY - Magdeburg DA - 11.04.2016 KW - Ökodesign KW - Marktüberwachung KW - Industriegüter PY - 2016 AN - OPUS4-35740 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - 2015 SRV global circular comparison results bulletin N2 - Tribological profile of hydraulic oils by using SRV. The determination of a set of critical, tribological by using different SRV-based test methods. The SRV-based concept of tribological profile generates the wear volumes on two triboelements (specimen), the extreme pressure properties and friction under different contact pressures. Thus, the benchmark and validation of hydraulic oils bear on a wider range of tribological properties. The RR2016 extends with six hydraulic oils to other base oil types including biodegradable fluids, which were all tested according to ASTM D7043 in order to consolidate the correlation between SRV and V104C. T2 - Working Group Meeting about SRV in China 2016 CY - Beijing, China DA - 05.04.2016 KW - SRV KW - Standards KW - China PY - 2016 AN - OPUS4-35744 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - 2016 SRV global circular comparison results bulletin N2 - Actions from the meeting in April 2016: 1. Four SAC test methods are in place and were revised: SH/T 0721 (Grease, coefficient of friction and wear), SH/T 0784 (Grease, pass load/O.K. load), SH/T 0847 (Oil, coefficient of friction and wear) and SH/T 0882 released by 11-2014 (Oil, pass load/O.K. load). 2. New test method to evaluate anti-fretting properties of greases based was approved by SAC TC280 and will be released. 3. SAC TC280 accepted the project “Simulation of synchronizer by using SRV”. Draft text to be submitted by 03-2017. Discussions on a parallel ASTM test method. 4. A procedure for “Wear Volume” is under development for SAC TC280. T2 - Working Group Meeting about SRV in China 2016 CY - Beijing, China DA - 05.04.2016 KW - SRV KW - Standards KW - China PY - 2016 AN - OPUS4-35745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Recent work of the global SRV working group and the development trend of SRV standards N2 - „Cliff“-testing by using SRV The identification in engine or gear tests of the induction time or off-set point („cliff“), after which wear and friction increased. “Cliff” testing as auxiliary method supports the interpretation of engine tests, as it enhances the values of expensive engine tests, because it enables correlations between friction & wear, either from engine or in SRV tests, with additive depletion, oxidation, viscometrics and dispersancy/detergency. Oil samples taken in discrete intervals and “Cliff” tested monitors the evolution of tribological and functional properties versus engine running time. “Cliff” testing by using SRV is a purposeful tool in order to secure and accelerate metallurgical developments and the development of lubricant formulations. T2 - Working Group Meeting about SRV in China 2016 CY - Beijing, China DA - 05.04.2016 KW - SRV KW - Standards KW - China PY - 2016 AN - OPUS4-35747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Otremba, Frank T1 - Hazmat tanks under extreme loading condition N2 - Gefahrguttanks werden primär gegen betriebliche Belastungen dimensioniert. Unfallbelastungen spielen hierbei keine Rolle. In der Vergangenheit gab es immer wieder einige katastrophale Unfälle, die nicht nur materielle Schäden zur Folge hatten sondern bei denen auch Todesopfer zu beklagen waren. Zur Ermittlung möglicher Sicherheitsreserven werden Untersuchungen zum Abtrag auslegungsüberschreitender Belastungen durchgeführt. Mit dem Grenzlasttragverfahren steht ein leistungsfähiges Analysewerkzeug zur Verfügung, mit dem nichtlineare Beanspruchungsszenarien bewertet werden können. Der Vergleich der numerischen mit den experimentellen Ergebnissen zeigt dies eindeutig. T2 - Gefahrgutkolloquium CY - Quetètaro, Mexico DA - 14.03.2016 KW - Hazmat tanks PY - 2016 AN - OPUS4-35651 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - Aktuelles zur Weiterentwicklung der IAEA Transportempfehlungen N2 - Die IAEA Transportempfehlungen stellen die Basis der sicherheitstechnischen Anforderungen von Behältern zum Transport radioaktiver Stoffe dar. Sie gelten als international harmonsiert und werden regelmäßig an den Stand von Wissenschaft und Technik angepasst. Der laufende Revisionsprozess berücksichtigt mehr als 150 Vorschläge zur Weiterentwicklung des Regelwerks. Wesentliche Themen, die für die hoheitlichen Prüfungen im Zuständigkeitsbereich der BAM eine Rolle spielen, werden im Vortrag vorgestellt. Das Implementieren der besonderen sicherheitstechnischen Anforderungen an Zwischenlagerbehälter werden im Detail behandelt. Ebenfalls von Interesse ist die Weiterenticklung der Anforderungen, die den Einfluss des radioaktiven Inventars auf das Verschlusssystem bei Fallprüfungen diskutiert. T2 - 5. RAM-Behältersicherheitstage CY - Berlin, Deutschland DA - 16.03.2016 KW - IAEA KW - Transportbehälter KW - Sicherheitstechnische Auslegung KW - Dual purpose casks KW - Fallprüfungen PY - 2016 AN - OPUS4-35655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander T1 - Erfahrungen mit der eindeutigen Kennzeichnung - Lesbarkeit und Inhalte von Datamatrix-Codes N2 - Mit der Richtlinie 2008/43 wurde europaweit ein System zur Rückverfolgung von Explosivstoffen von Herstellung bis zum Verbrauch geschaffen. Dabei erhält jeder Zünder und jede Sprengstoffpatrone eine eindeutige Kennung, die üblicherweise als Datamatrix-Code aufgebracht wird. Seit 2015 muss das System angewandt werden. Trotz einer reichlichen Übergangsfrist gibt es immernoch Probleme im Detail, die sich vor allem auf die IT-mäßige Verarbeitbarkeit beziehen. T2 - 38. Informationstagung Sprengtechnik CY - Siegen DA - 01.04.2016 KW - Explosivstoffe KW - Rückverfolgbarkeit KW - Richtlinie 2008/43 PY - 2016 AN - OPUS4-35658 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisermann, René T1 - Verteilte faseroptische Sensorik für die akustische Detektion von Teilentladungen N2 - Eingeladener Seminarvortrag an der Technischen Universität Berlin über neuste wissenschaftliche Ergebnisse der Detektion von Teilentladungen an Kabelmuffen mittels verteilter akustischer Sensorik. T2 - Seminarvortrag bei der Veranstaltung "Hochspannungstechnik/ Energieübertragung" CY - Berlin, Deutschland DA - 11.11.2015 KW - 8.6 KW - Fasersensorik KW - Verteilte akustische Sensorik KW - Teilentladungs Überwachung PY - 2015 AN - OPUS4-35699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohn, Holger T1 - The VDI guideline series 4800 resource efficiency: an approach for increasing resource efficiency with the aim of conservation of natural resources in the industrial sector N2 - In 2011, the German Association of Engineers (VDI) started working on a set of guidelines towards increased resource efficiency. These guidelines represent a framework that defines resource efficiency and outlines considerations for the producing industry. A special guideline for SMEs is included as well as guidelines on methodologies for evaluating resource use indicators, such as the cumulative raw material demand of products and production systems. Resource efficiency, defined here as the ratio of specific quantifiable use to natural resource consumption, can be evaluated by defining a function which expresses the specific use and quantifies the resource requirements through a set of indicators (use of raw materials, energy, water, land and ecosystem services including sinks). The results from this also depend on the system boundary parameters and the allocation rules for by-products and waste treatment options. Optimising resource use is possible at all stages of a product’s or production system’s life cycle chain (raw material extraction, production and manufacturing, use and consumption, and the end-of-life stage). VDI guidelines are widely accepted across Germany’s industrial sector and therefore represent an important means of mainstreaming resource efficiency in this target area. As well as providing a methodological framework, the guidelines describe strategies and measures towards increasing resource efficiency, and they enable industrial producers and service providers to identify potential areas of improvement. The full article presents an overview of the methodology and contents of these guidelines and discusses their impact in achieving absolute reductions in the industrial use of natural resources. T2 - World Resources Forum 2015 CY - Davos, Switzerland DA - 11.10.2015 KW - Resource Efficiency KW - Life cycle thinking KW - Products and production systems KW - Standardization PY - 2015 AN - OPUS4-35674 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steinborn, Gabriele T1 - Stable aqeous niobium carbide suspensions for production of homogeneous hard materials N2 - Hard materials consist of a hard phase embedded in a metallic binder. In order to achieve high toughness and strength, it is necessary to have a perfect mixing of hard phase and binder, which is mainly achieved by ball milling. Niobium carbide (NbC) has a high potential to substitute tungsten carbide as hard material. The publication presents the development of stable homogeneous and de-agglomerated NbC-dispersions. To prevent agglomeration of the powder, stable suspensions were achieved by surface treatments with the dispersants (PD and HD), which resulted in a charge reversal from a negative to a positive zeta potential. This surface-modified powder guaranteed a stable re-dispersion in the binder suspension. Nickel powder was added as metallic binder. This suspension was suited for 3D-printing. The green samples could be sintered in vacuum or Argon atmosphere. T2 - 91. Jahrestagung der deutschen keramischen Gesellschaft CY - Freiberg, Germany DA - 07.03.2016 KW - Niobium carbide powder KW - Stable suspensions KW - Reduction of agglomerates PY - 2016 AN - OPUS4-35636 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktueller Stand der Normung N2 - Normung, Normen zur Konformitätsbewertung ISO 9001:2015 - Auswirkung auf die ISO CASCO Toolbox Revision der ISO/IEC 17011 T2 - FB 6 Sitzung CY - Berlin, Germany DA - 11.02.2016 KW - Normung PY - 2015 AN - OPUS4-35638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -