TY - CONF A1 - Gründer, Klaus-Peter A1 - Geburtig, Anja T1 - Optical Methods in Single Crystal Deformation Analysis at High Temperature N2 - This poster deals with grating methods, white light intereference microscopy, a setup for HT investigation and applications. T2 - International Symposium on „Photonics in Measurement“ CY - Aachen, Germany DA - 11.06.2002 KW - Grating method KW - White light intereference microscopy KW - HT investigation PY - 2002 AN - OPUS4-35899 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Anita A1 - Schlick-Hasper, Eva A1 - Geburtig, Anja A1 - Bethke, John T1 - Stand der BAM-Forschungsvorhaben T2 - Erfahrungsaustausch Verpackungen CY - Berlin DA - 2014-09-16 PY - 2014 AN - OPUS4-32638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Perret, Birgit T1 - Halogen-free flame retarded Bisphenol a polycarbonate blends T2 - 10th European Symposium on Polymer Blends CY - Dresden, Germany DA - 2010-03-07 PY - 2010 AN - OPUS4-21034 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter T1 - Beispiele für die Nutzung des Energietransports durch langwellige (thermische) Strahlung T2 - 35. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) "Umwelteinflüsse erfassen, simulieren, bewerten" im Fraunhofer Institut für Chemische Technologie (ICT) CY - Pfinztal, Germany DA - 2006-03-22 PY - 2006 AN - OPUS4-12265 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Chancen und Grenzen der Verkürzung von Bewitterungstests durch empfindliche Chemilumineszenz-Detektion T2 - DFO Qualitätstage 2008, Appearance, Bewitterung, Korrosion, Farbe CY - Fürth, Germany DA - 2008-10-07 PY - 2008 AN - OPUS4-18710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - The influence of humidity and wetness on weathering results T2 - Konferenz ATCAE (Atlas Technical Conference for Accelerated Ageing and Evaluation) CY - Oxford, England DA - 2008-09-15 PY - 2008 AN - OPUS4-18000 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Grundsätzliches zur Verfahrensauswahl bei der künstlichen Bestrahlung und Bewitterung T2 - 37. Jahrestagung der Gesellschaft für Umweltsimulation CY - Pfinztal, Germany DA - 2008-03-12 PY - 2008 AN - OPUS4-17337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Prüfverfahrensauswahl T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19671 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yu, Jialu T1 - Simultaneous In Situ Fe Isotope and Trace Element Analysis by LASS-MC-ICPMS / ICP-ToF-MS: Validation and Applications N2 - Iron isotopes serve as sensitive tracers of iron’s origin, transformations, and cycling in the natural system. Their sensitivity to redox changes, biological processing, and mineral–fluid interactions makes them a valuable indicators in both geochemical and biological studies. To obtain Fe isotope ratios together with trace elemental information from the same ablation volume, a laser-ablation split-stream (LASS) configuration was employed:. The laser system was coupled simultaneously to a multi-collector ICP-MS (MC-ICP-MS) and an inductively coupled plasma time-of-flight mass spectrometer (ICP-ToF-MS). The ablated aerosol is divided into two gas streams which enable for a high-precision Fe isotope measurements on the MC-ICP-MS while acquiring full quantitative multi-element datasets on ICP-ToF-MS. The performance of this approach was assessed validated using in-house gelatin reference materials and two well-characterized basaltic glass standards, BHVO-2G and BCR-2G. These materials were prepared and analysed to determine the accuracy and precision of the LASS setup. The obtained Fe isotope ratios and elemental concentrations were in a good agreement with established/published values, indicating that the method provides reliable isotope measurements alongside robust, quantitative elemental data. Following validation, the LASS technique was applied to a series of materials representing different scientific domains: the biological reference material NIST 1577c (bovine liver) and two iron-oxide materials: hematite (HMIE-NP-B01) and magnetite (MARK-NP-B01). The successful application of the method to these contrasting materials highlights the flexibility and analytical ability of the LASS approach for Fe isotope ratio measurement and elemental fingerprint in diverse geological and biological contexts. T2 - DGMS ICP-MS user meeting 2026 CY - Leipzig, Germany DA - 10.03.2026 KW - Fe isotope KW - Laser ablation KW - Geological materials KW - Split stream KW - Gelatin KW - ICP-ToF-MS KW - Elemental fingerprint PY - 2026 AN - OPUS4-65677 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn T1 - LIPSS for beginners N2 - This overview introduces to the phenomenon of Laser-Induced Periodic Surface Structures (LIPSS). Starting from a phenomenological introduction, the most relevant physical effects and theoretical models are discussed. Applications and future directions are outlined. T2 - Workshop “Ultrafast Structural Transformations in Condensed Matter – Bridging Theory and Experiment” CY - Wroclaw, Poland DA - 09.02.2026 KW - Laser-induced periodic surface structures (LIPSS) KW - Coherent optical scattering KW - Nanostructures KW - Matter reorganization PY - 2026 AN - OPUS4-65672 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hufgard, Josefin T1 - AIM Forward: Acoustic Ion Manipulation for Efficient Ambient-Pressure Ion Control N2 - In ion-based spectrometry techniques the possibility to manipulate ions is fundamentally important. Currently used ion optics mostly rely on magnetic or electric fields. The electromagnetic forces compete with ion diffusion and are therefore most effective under low-pressure conditions. Therefore, high-pressure ion optics pose challenges related to elevated powers and potentials as well as complex structures and electrode contamination. Acoustic Ion Manipulation (AIM) is a recently discovered phenomenon that relies on the unique interactions between gas-phase ions and acoustic waves. This presentation shows selected patterns of ion manipulation, highlights the flexibility of AIM and discusses its current limitations and potentials. T2 - DGMS Annual Conference 2026 CY - Leipzig, Germany DA - 10.03.2026 KW - Acoustic ion manipulation KW - Mass spectrometry PY - 2026 AN - OPUS4-65680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Discussion on Weathering Reference Materials N2 - Weathering reference materials are used to characterize the harshness of an exposure, aiming on either reproducibility of a specific exposure or on the comparability between various kinds of weathering exposure. The materials that are used as weathering reference materials differ in their sensitivities (as well as in interactions and interferences of the latter), conditioned by the different processes which lead to the respective property change. It is also essential to take into account the necessary measurement equipment for the respective property change, in order to allow timely intervention. What are the key issues on choosing a weathering reference material? What can be learned from the weathering reference materials, investigated so far? Possibilities and limitations are discussed on the basis of existing weathering reference materials. Conclusions are drawn, for establishing new weathering reference materials. T2 - 9th European Weathering Symposium CY - Basel, Switzerland DA - 18.09.2019 KW - Plastic KW - Ageing KW - Fragmentation KW - Environment KW - Digital twin PY - 2019 AN - OPUS4-49713 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wachtendorf, Volker T1 - Grundsätzliches zur Frage der "UV-Beständigkeit" bzw. der "Lichtbeständigkeit" polymerer Werkstoffe T2 - 42. Jahrestagung der Gesellschaft für Umweltsimulation, GUS. "Umwelteinflüsse erfassen, simulieren, bewerten" CY - Stutensee, Germany DA - 2013-03-20 PY - 2013 AN - OPUS4-27914 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Beanspruchung von HDPE-Verpackungsproben durch UV-Strahlung und Salpetersäure T2 - 43. Jahrestagung der Gesellschaft für Umweltsimulation CY - Stutensee, Germany DA - 2014-03-26 PY - 2014 AN - OPUS4-31041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter T1 - Referenzmaterialien für Bewitterungsprüfungen T2 - 32. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) CY - Pfinztal, Germany DA - 2003-03-26 PY - 2003 AN - OPUS4-4078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trubiroha, Peter T1 - Reference Materials for Weathering Tests T2 - 1st European Weathering Symposium EWS CY - Prague, Czech Republic DA - 2003-09-25 PY - 2003 AN - OPUS4-4077 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - (UV-)Strahlenklima und Strahlungsmessung T2 - Seminar Technische Akademie Wuppertal CY - Altdorf, Germany DA - 2009-04-02 PY - 2009 AN - OPUS4-19653 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Ulrich T1 - the Influence of Mildew growth on Automotive Coatings on the Results of Outdoor Weathering T2 - 1st European Weathering Republik CY - Karlsruhe, Germany DA - 2003-09-25 PY - 2003 AN - OPUS4-4070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja T1 - Weathering Reference Materials - Monitors for Weathering Exposure T2 - 3rd Symposium on Service Life Prediction CY - Sedona, AZ, USA DA - 2004-02-02 PY - 2004 AN - OPUS4-4756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilberg, Alec T1 - Untersuchung und Kompensation des Size-of-Source Effektes der Thermografie zur Prozessüberwachung in der metallischen additiven Fertigung N2 - Der Einsatz der Thermografie zur Prozessüberwachung in der additiven Fertigung von Metallen ist aktueller Schwerpunkt diverser Forschungsprojekte. Prozessbedingt können im Bauteil Risse, innere Spannungen und sonstige interne Fehlerstellen auftreten, deren Entstehung durch wichtige thermische Größen wie Phasenumwandlungstemperaturen, Abkühlgeschwindigkeiten und thermische Gradienten beeinflusst wird. Um diese Einflüsse zu untersuchen, ist eine möglichst genaue Messung dieser Parameter notwendig. Neben den häufig betrachteten Einflüssen des Emissionsgrades, der Umgebungstemperatur und der atmosphärischen Absorption besteht ein weiterer Einfluss, hervorgerufen durch das optische System. Der Kameraaufbau, das verwendete Objektiv und Teilchen im Strahlengang können zur Beugung, Streuung, Reflektion und Aberration der elektromagnetischen Strahlung führen, wodurch die thermografische Messung verfälscht wird. Dies ist ein in der Pyrometrie intensiv erforschter Effekt und wird, aufgrund der Abhängigkeit zur betrachteten Objektgröße, als Size-of-Source Effekt bezeichnet und in dieser Arbeit untersucht. Im Laser-Pulver-Auftragsschweißen (LPA) wird mittels eines Lasers auf einer Substratplatte ein Schmelzbad erzeugt und durch Einblasen von Metallpulver die lagenweise Fertigung von komplexen Bauteilen ermöglicht. Dabei können, je nach geometrischer Auflösung der Kamera, Größen des Schmelzbades im Bereich weniger Prozente der gesamten Bildfläche auftreten. Aus durchgeführten Referenzmessungen an Schwarzkörperstrahlern kann in der gleichen Größenordnung eine Abweichung der Strahlungswerte im zweistelligen Prozentbereich festgestellt werden. Daher ist in diesem Anwendungsfall der dadurch verursachte Fehler nicht zu vernachlässigen, weshalb auf Basis der Referenzmessungen eine Methode entwickelt wurde, um in Abhängigkeit der Größe des Objektes einen Faktor zur Kompensation des Size-of-Source Effektes zu berechnen. In diesem Beitrag werden erste Ergebnisse dieser im Rahmen des DFG Projektes QT-LPA (Nr. 516965606) durchgeführten Arbeiten präsentiert. T2 - DGZfP Jahrestagung 2025 CY - Berlin, Germany DA - 26.05.2025 KW - SSE KW - Thermografie KW - Size of source Effect PY - 2025 AN - OPUS4-65651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -