TY - CONF A1 - Krüger, Jörg T1 - Aktuelle Ultrakurzpulslaser-Anwendungen an der BAM N2 - Der Vortrag fasst aktuelle Anwendungsgebiete ultrakurzer Laserimpulse in der Materialbearbeitung zusammen. Dabei wird auch die Gefährdung durch unerwünschte Emission von Röntgenstrahlung bei der Überschreitung bestimmter Laserparameter thematisiert. T2 - Anwendertreffen des Laserverbundes Berlin-Brandenburg e.V. CY - Brandenburg, Germany DA - 16.01.2020 KW - Ultrakurze Laserimpulse KW - Materialbearbeitung KW - Oberflächenstrukturierung PY - 2020 AN - OPUS4-50317 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gojani, Ardian T1 - Combined Raman and LIBS using Spatial Heterodyne Spectrometer with High Repetition Rate Laser N2 - Spatial heterodyne spectroscopy is used for Raman and laser-induced breakdown spectroscopy of six rocks with various mineral content, using high repetition rate diode-pumped solid state lasers. While LIBS data are obtained for all samples, Raman signal was determined only for half of those. This work shows that it is possible to combine LIBS and Raman spectrometry into a single instrument consisting of a DPSS laser for excitation and SHS for spectral recording. For better results and gain from complementary spectrochemical information that the system provides, it is necessary to optimize light collection. T2 - 2020 Winter Conference on Plasma Spectrochemistry CY - Tucson, Arizona, USA DA - 13.01.2020 KW - Laser-Induced Background Spectroscopy KW - Spatial heterodyne spectroscopy KW - Raman spectroscopy PY - 2020 AN - OPUS4-50265 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marquardt, Julien T1 - Investigating the morphology of nanostructured mixed metal oxides (Ir/TiOx) and its impact on the electrocatalytic OER-activity N2 - The electrocatalytic conversion of water into molecular hydrogen and oxygen under the utilization of excess renewable energies, such as wind power, photovoltaics and hydroelectric power is one possible pathway to establish a sustainable hydrogen economy. The obtained hydrogen is either stored and used in a fuel cell or consumed on-site in industrial applications. Water electrolysis systems (WES) are based on two half cell reactions, such as oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) which both proceed simultaneously. The OER suffers from slow reaction kinetics and thus limits the overall performance. The most promising compounds in acidic electrolysis are IrO2 and RuO2. Due to their rare abundance and extremely high price a wide use of acidic WES was prevented. Lowering the catalysts noble metal content by mixing iridium with titanium reduces the production costs. Thin films are produced by dip coating a solution of metal oxide precursors alongside with a polymer template dissolved in ethanol. The obtained samples are subsequently calcined to the remove the template and adjust crystallinity. Finally, an additional iridium deposition step was performed on the outer surface plane area. Understanding the influence of structural and morphological aspects on the OER-activity is beneficial to further optimize WES. The current presentation will thus give detailed insights to structural aspects obtained by Raman spectroscopy, small- and wide-angle X-ray scattering which are then combined with electrochemical parameters to deduce structure-activity relationships. T2 - Joint Polish-German Crystallographic Meeting 2020 CY - Wrocław, Poland DA - 24.02.2020 KW - nanostructured KW - electrocatalysis PY - 2020 AN - OPUS4-50664 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Auersch, Lutz T1 - Das Prognosetool der BAM zur Emission, Transmission und Immission von Bahnerschütterungen N2 - Die gesamte Prognose wurde rechnerisch erfasst. Die Rechenverfahren sind einfach und schnell. Die Emission und die Immission verwendet Übertragungsmatrizen. Die Transmissionsrechnung beruht auf der Dispersion der Rayleighwelle. Die Verknüpfung erfolgt über die Anregungskraft auf den Boden und über die Freifeldamplitude am Gebäude. Es sind viele Eingabemöglichkeiten für Messdaten vorgesehen. Messungen können von einem Ort auf einen anderen Ort übertragen werden. T2 - 98. Sitzung des Normausschusses "Schwingungsminderung in der Umgebung von Verkehrswegen" CY - Online meeting DA - 07.05.2020 KW - Bahnerschütterungen KW - Prognose KW - Übertragungsmatrizen KW - Rayleighwellendispersion PY - 2020 AN - OPUS4-50748 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ghasem Zadeh Khorasani, Media T1 - Long range influence of boehmite nanoparticles on the nanomechanics of epoxy matrix used in carbon-fiber composites N2 - Boehmite nanoparticles (AlOOH) were recently found to improve properties such as crack resistance, shrinkage and compressive strength in epoxy composites. Concentration and surface modification of boehmite nanoparticles are key factors for abovementioned enhancements. To understand the underlying mechanisms, more detailed research of micro- and nanoscopic mechanical properties is required. The presented study aims to investigate the influence of concentration and surface modification of boehmite on the stiffness of the bulk epoxy by means of AFM-based approaches: Force-Distance curves (FDC) on the sub- microscale and Intermodulation AFM and amplitude-dependent force spectroscopy (ADFS) on the nanoscale. For this purpose, stiffness-maps of epoxy filled with boehmite, with and without surface modification (HAc-boehmite) were obtained by FDC. These measurements showed a slight increase in overall stiffness of composite with increasing the nanoparticle content. The stiffening effect was observed to be intensified with HAc-boehmite. Since the lateral resolution of FDC is not high enough to distinguish nanoparticles, this effect was assumed to be due to the inevitable inclusion of nanoparticles in the measurement. By using Intermodulation-AFM, yielding ADFS stiffness maps with the resolution of <10 nm, we were able to calculate the average stiffness of bulk epoxy without the interference of nanoparticles. It was expected that the stiffness of regions faraway from particles would be equal to neat epoxy. In contrast, the results showed a drastic increase in stiffness of epoxy with increasing boehmite concentration (0, 1, 2.5, and 15%) especially in case of introducing 15wt% HAc-boehmite. Another important observation was formation of a spatial structure with non-homogenous stiffness distribution in bulk epoxy with HAc-boehmite. The underlying mechanisms of described observations are not fully understood yet. One hypothesis is the local increase in crosslinking density which we aim to investigate in our further studies by combining Dynamic Mechanical Thermal Analysis (DMTA) and Intermodulation-AFM. T2 - Frontiers in Polymer Science CY - Seville, Spain DA - 17.05.2017 KW - AFM KW - Boehmite KW - Epoxy nanocomposite PY - 2017 AN - OPUS4-50688 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ghasem Zadeh Khorasani, Media T1 - Studies on interphase formation of cured epoxy resin near boehmite surface N2 - The application of inorganic nanoparticles as reinforcement agent for polymer composites is constantly growing. Improving the performance of the material with desirable properties requires understanding of the interaction between polymer chains and nanoparticles and the properties of the interphase as well. Boehmite, a mineral of aluminum with basic unit of AlO(OH), is a novel and promising nanofiller which leads to enhanced performance of polymer composites. It has been recently reported that boehmite nanoparticles have reinforcing effect on epoxy matrix in carbon-fiber composites. It was primarily assumed that these improvements are due to very high Young’s modulus of boehmite particles. However, in our latest study we presented new values for the Young’s modulus of boehmite much lower than those reported earlier. This brings up the importance of interphase properties, e.g. the crosslink density, which can have the dominant role in the overall material property. Nevertheless, due to resolution limitations of conventional nanoprobing approaches, characterization of the interphase between individual particles and matrix is a challenge. In this study, the main goal is to investigate the interphase of the epoxy/boehmite nanocomposites using AFM-based methods. We simplify the three-dimensional nanocomposite system to a two-dimensional horizontally layered sample with a large and easy to access interphase area. For this purpose, 1µm coatings of hydrothermally synthesized boehmite are prepared as the substrate on which the epoxy is later molded and cured. AFM surface potential and force maps were obtained on the cross-sectional cut of epoxy/ boehmite sample. The results show unexpectedly a large interphase area (approx. 1 µm) with different electrical and mechanical properties comparing to bulk epoxy. The average force-distance curves from this region showed more elastic behavior compared to bulk. The underlying mechanism of this influence is not fully understood yet. Thus, further investigation on the interphase region using the novel Nano-IR approach provides more information about the chemical characteristics. Numerical simulation will give complementary information to understand the effect of nanoparticles on the crosslinking density of the interphase. This can be different to bulk epoxy due to either different local temperature gradients or due to a surface selectivity of boehmite towards the monomer molecules. T2 - ICCS20–20th International Conference on Composite Structures CY - Paris, France DA - 04.09.2017 KW - AFM KW - AFM-IR KW - ImAFM KW - Boehmite KW - Epox KW - Nanocomposite KW - Interphase KW - Nanomechanics PY - 2017 AN - OPUS4-50689 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Frenzel, Florian T1 - Spectroscopic study of plasmon enhanced UPCON luminescence of silica-metal core-shell nanocomposites - status report N2 - The presentation focuses on the current state of the optical spectroscopic studies on plasmon enhanced upconversion luminescent processes of silica-metal core-shell nanocomposites. A general introduction of the upconversion process, the theoretical basis of plasmonic enhancement, the theoretical requirements in regard to NP architecture for plasmon enhanced UC will be outlined. The first proof-of-concept measurements show the difficulty in realization the theoretical measurement parameters in laboratory conditions and underline the need for shifting the experiments to single particle level.“ T2 - Gruppenseminar der Nanooptik an der HU Berlin, Prof. Benson, Institut für Physik, Raum 1‘404 CY - Berlin, Germany DA - 09.05.2017 KW - Upconversion KW - Pplasmon enhancement KW - Core-shell nanoparticles KW - Silca-metal nanoparticles PY - 2017 AN - OPUS4-50698 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Aris, Stephan T1 - Aktueller Stand der Normung von Gasflaschenventilen N2 - Im Vortrag wird der aktuelle Stand der Normung von Gasflaschenventilen vorgestellt. Dieser umfasst nationale, europäische und internationale Normen, die größtenteils im Bereich der Gefahrgutbeförderung verbindlich anzuwenden sind. T2 - 27. Jahrestreffen BAM/DIN/DVFG/IGV CY - Berlin, Germany DA - 27.02.2020 KW - ADR KW - Gasflaschenventile KW - Normung PY - 2020 AN - OPUS4-50701 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Test methods for heat pumps N2 - Comparison of different test methods for the determination of the seasonal performance of heat pumps: 1) The current test standard EN14825, 2) the compensation test method and 3) the dynamic test method. T2 - Impact Assessment / Consultation Space and Water Heaters WG2 Testing CY - Online meeting DA - 02.04.2020 KW - Heat pump KW - Energy label KW - Seasonal performance KW - Compensation method KW - Dynamic method PY - 2020 AN - OPUS4-50713 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Technical Meeting BAM RRT for Heat Pumps N2 - Kickoff meeting for the BAM round robin test for load-based heat pump testing T2 - Kickoff meeting BAM RRT for heat pumps CY - Online meeting DA - 26.03.2020 KW - Heat pump KW - Round robin test KW - Load-based testing KW - Compensation method KW - Energy efficiency PY - 2020 AN - OPUS4-50715 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palkowski, Carsten T1 - Technical Meeting BAM RRT for Air Conditioner N2 - Kickoff meeting for the BAM round robin test for load-based air conditioner testing. T2 - Kickoff meeting BAM RRT for air conditioner CY - Online meeting DA - 26.03.2020 KW - Air conditioner KW - Round robin test KW - Load-based testing KW - Compensation method KW - Energy efficiency PY - 2020 AN - OPUS4-50716 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Raysyan, Anna T1 - Determination of mycotoxins in food and pharmaceuticals by immunochemical analysis N2 - Mycotoxins are toxic secondary metabolites produced by filamentous fungi. The contamination of mycotoxins in food and feed products has been recognized to be an important safety issue for human and animal health. In the context of food safety, medical herbs nowadays are also considered as potential source of mycotoxins. Considering that mycotoxins are generally stable compounds and could not be destroyed completely during food-processing operations, prevention of contamination is identified as main issue. Currently, biochemical, and immunochemical methods based on the use of antibodies as a specific recognition bioreagents are increasingly found to be applied in screening. Along with good common enzyme linked immunosorbent assay (ELISA), more and more widely used method is fluorescence polarization immunoassay (FPIA). These methods help to monitor of many toxic substances in large number of samples and carried out quickly, easily, cheaply, and give good results in quantifying the one or more substances. That is why the use of immunochemical methods of analysis, such as ELISA and FPIA, is the most promising for solving this problem. Thus, the aim of our work is to optimize the determination of mycotoxins by ELISA and FPIA in medical herbs. We selected antibodies and a tracer for the FPIA, then we constructed obtained a calibration curve and determined the sensitivity of this method for the samples in aqueous media. Then, the optimal sample preparation was elaborated: for spiked nuts samples were selected and prepared and a calibration curve was obtained with respect to the matrix effect. After that, the analysis of spiked nuts samples was performed by ELISA and FPIA and the sensitivity of both methods was compared. T2 - Global Food Science Student Competition CY - Jiangnan University, Wuxi, China DA - 14.11.2018 KW - Mycotoxins KW - FPIA KW - ELISA PY - 2018 AN - OPUS4-50048 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Axel T1 - Analysis of tire wear particles in soil samples from roadside using TED-GC/MS N2 - Tire wear particles (TW) are generated by the abrasions of tires on the road surface through traffic. These particles can be transported by air and surface runoff and might also infiltrate the soil and consequently affect terrestrial ecosystems. The estimated tire wear (TW) emissions are immense, with 1.33 106 t a-1 in Europe. Despite this, only little is known about the environmental contents or the fate of TW. One reason for this knowledge gap is the challenging analysis of TW in environmental samples. Detection of TW with spectroscopic methods is problematic due to high fluorescence interferences caused by contained black carbon. One analytical approach is to use zinc (Zn), a typical additive in tires, as a specific marker for the quantification of tire wear. However, any Zn originating from the sample matrix must be separated beforehand and requires elaborate sample preparation. Car tires consist partly of synthetic rubbers, such as styrene-butadiene-rubber (SBR). This SBR could be identified and quantified via Thermal-Extraction-Desorption-Gas Chromatography-Mass Spectrometry (TED-GC-MS). This newly developed and fast screening method allows the simultaneous detection of microplastics and TW mass contents and requires minimal to no sample preparation. Firstly the sample is thermally extracted in a thermobalance under a nitrogen atmosphere. The resulting specific decomposition products are sorbed on a solid phase adsorber, which is then transferred to a GC-MS via an autosampler, where the products are desorbed, separated and identified. Cyclohexenylbenzene is used as a specific marker for SBR. Here we investigated top layer soil samples, collected at the roadside of highly frequented German highways. Samples were analyzed without sample preparation, and SBR was detected in all investigated samples in mass contents ranging from 67.2 to 2230 mg kg-1. A correlation between SBR and Zn content in the soil was confirmed, while the correlation between SBR and Corg was hardly pronounced. We successfully demonstrated the application of TED-GC-MS as a screening method for tire wear in soil samples. The present study will discuss these analytical results in detail as well as sampling parameters like sampling depth and distance to the roadside, and the effect of the particle size on the particle transport by water runoff and air. T2 - SETAC 2020 SciCon CY - Online meeting DA - 03.05.2020 KW - Microplastic KW - Analysis KW - Tire wear KW - Soil PY - 2020 AN - OPUS4-51086 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine T1 - NDT for microstructure and moisture investigation of porous building material T2 - NDT-CE 2015 CY - Berlin, Germany DA - 2015-09-15 PY - 2015 AN - OPUS4-34794 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - ext. Pflumm, Raluca T1 - Influence of silicon and refractory metals on the corrosion-erosion mechanismus under biomass firing conditions T2 - EUROCORR 2015 CY - Graz, Austria DA - 2015-09-06 PY - 2015 AN - OPUS4-34764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver T1 - Metallrückgewinnung aus Fluoreszenzlampen - Optimieren der Elementanalytik T2 - ICP-MS Anwenderseminar CY - Bremen, Deutschland DA - 2015-11-12 PY - 2015 AN - OPUS4-34766 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - An Ultra-SAXS Instrument on a Shoestring Budget T2 - SAS2015 CY - Berlin, Germany DA - 2015-09-13 PY - 2015 AN - OPUS4-34733 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - Looking at Nothing: life with a weblog T2 - SAS2015 CY - Berlin DA - 2015-09-13 PY - 2015 AN - OPUS4-34735 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pauw, Brian Richard T1 - The Future of SAXS T2 - SAS2015 CY - Berlin, Germany DA - 2015-09-13 PY - 2015 AN - OPUS4-34736 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lange, Nele T1 - XPS-Study of a New Azidation Method of Silicon Nitride T2 - Potsdam Days on Bioanalysis 2015 CY - Potsdam DA - 2015-11-04 PY - 2015 AN - OPUS4-34739 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe T1 - Normung und Standardisierung im Bereich von Kohlenstoffschichten T2 - 6. Graphen Treffen CY - Berlin DA - 2015-11-06 PY - 2015 AN - OPUS4-34742 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pfennig, Anja T1 - Evaluation of heat treatment performance of potential pipe steels in CCS-environment T2 - TMS 2015 144th Annual Meeting & Exhibition CY - Orlando, Florida, USA DA - 2015-03-15 PY - 2015 AN - OPUS4-34744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pfennig, Anja T1 - The Role of Austenitizing Routines of Pipe Steels During CCS T2 - TMS 2015 144th Annual Meeting & Exhibition CY - Orlando, Florida, USA DA - 2015-03-15 PY - 2015 AN - OPUS4-34745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pfennig, Anja T1 - High-Temperatur-High Pressure Stress-Strain Testing of Materials in CO2-Containing Saline Solutions T2 - TMS 2015, 144th Annual Meeting and Exhibition CY - Orlando, Florida, USA DA - 2015-03-15 PY - 2015 AN - OPUS4-34746 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian T1 - Update on the Activities of the Forum of Notified Bodies under 2013/29/EU T2 - 8th Meeting of the AdCo Pyrotechnic Articles CY - Rome, Italy DA - 2015-12-01 PY - 2015 AN - OPUS4-34753 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, Tobias T1 - Detection of CaCl2 in cement by LIBS T2 - 8th Euro-Mediterranean Symposium on Laser-Induced Breakdown Spectroscopy 2015 (EMSLIBS 2015) CY - Linz, Austria DA - 2015-09-14 PY - 2015 AN - OPUS4-34762 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Traceability of PDMS on TiO2 and HDPE substrates by a multi analytical approach T2 - 16th European Conference on Applications of Surface and Interface Analysis (ECASIA 15) CY - Granada, Spain DA - 2015-09-28 PY - 2015 AN - OPUS4-34808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Fabrication, microscopic and spectroscopic characterization of planar, nanopatterned,multi-metallic samples C T2 - 16th European Conference on Applications of Surface and Interface Analysis (ECASIA 15) CY - Granada, Spain DA - 2015-09-28 PY - 2015 AN - OPUS4-34809 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Determination of lateral resolution and field of view in imaging and small area surface chemical analysis: Reference materials and standardization T2 - 16th European Conference on Applications of Surface and Interface Analysis (ECASIA 15) CY - Granada, Spain DA - 2015-09-28 PY - 2015 AN - OPUS4-34810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Klassifizierung, Umgang und Lagerung explosiver und reaktionsfähiger Stoffe T2 - Fachkonferenz "Gefahrgut" im Rahmen der 4. Deutsch-Chinesischen Konferenz zur Umsetzung des Aktionsplans "Grüne Logistik" CY - Berlin DA - 2015-11-11 PY - 2015 AN - OPUS4-34787 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne T1 - Nanoskalig hergestellte Materialien - Neueste Erkenntnisse T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen DA - 2015-11-05 PY - 2015 AN - OPUS4-34788 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Der Einfluss des Staubungsverhaltens auf druckentlastete Staubexplosionen T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen DA - 2015-11-05 PY - 2015 AN - OPUS4-34789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen T1 - Wie beeinflussen nicht-atmosphärische Bedingungen das Deflagrationsverhalten? T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen DA - 2015-11-05 PY - 2015 AN - OPUS4-34790 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knechtel, Sophie T1 - Modellierung des Hauptbrandszenarien von flüssigem Wasserstoff (LH2) mittels CFD T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen DA - 2015-11-05 PY - 2015 AN - OPUS4-34791 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd T1 - Praxisbeispiele für (Störfall)-Auswirkungsbetrachtungen T2 - DECHEMA Fortbildung: Stoff- und Energiefreisetzungen in der Sicherheitstechnik CY - Frankfurt/Main DA - 2015-11-10 PY - 2015 AN - OPUS4-34780 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schalau, Bernd T1 - VDI Richtlinie 3783 Blatt 1; Ausbreitung von Freistrahlen und dichteneutralen/leichten Gasen T2 - DECHEMA Fortbildung: Stoff- und Energiefreisetzungen in der Sicherheitstechnik CY - Frankfurt/Main DA - 2015-11-10 PY - 2015 AN - OPUS4-34781 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Einfluss von Werkstroffparametern auf die relative Zündhäufigkeit von Brenngas/Luft-Gemischen bei Edelstahl-Schlagvorgängen - Ergebnisse des Forschungsvorhabens NAMES T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2015-11-05 PY - 2015 AN - OPUS4-34782 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - OBERFLÄCHEN- UND GRENZFLÄCHENANALYTIK MIT DEN VERFAHREN PHOTOELEKTRONEN-, AUGER-ELEKTRONENSPEKTROSKOPIE UND SEKUNDÄRIONEN-MASSENSPEKTROMETRIE T2 - ZVO-Oberflächentage Berlin 2015 CY - Berlin DA - 2015-09-24 PY - 2015 AN - OPUS4-34817 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Programmable ordered multiayers of nanometer-sized macrocycles and switchable rotaxanes on solid support T2 - Workshop "Koordinationsnetzwerke als Bausteine für Funktionssysteme" CY - Schloss Reisenburg, Günzburg DA - 2015-06-02 PY - 2015 AN - OPUS4-34819 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Wolfgang T1 - Metrology for spatially resolved chemical analysis at the micro and nanometre scales Surface Analysis Working Group (SAWG) - Report for 13th Meeting (2014/15) T2 - CCQM Plenary Meeting, BIPM CY - Paris, Frankreich DA - 2015-04-20 PY - 2015 AN - OPUS4-34820 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. T1 - Near Real-Time Reconstruction of 2D Soil Gas Distribution from a Regular Network of Linear Gas Sensors T2 - IEEE SENSORS 2015 CY - Busan, South Korea DA - 2015-11-01 PY - 2015 AN - OPUS4-34822 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang T1 - Improved reliability and efficiency of SHM systems by advanced standardization T2 - 32nd Danubia-Adria Symposium 2015 CY - Stary Smokovec, Slovakia DA - 2015-09-23 PY - 2015 AN - OPUS4-34643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang T1 - Importance of standardization to promote the use of SHM systems T2 - SMAR2015 Conference CY - Antalya, Turkey DA - 2015-09-07 PY - 2015 AN - OPUS4-34644 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habel, Wolfgang T1 - Online-detection of slipping soil areas by embedded fiber-optic sensor rods T2 - SMAR2015 Conference CY - Antalya, Turkey DA - 2015-09-07 PY - 2015 AN - OPUS4-34645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pelkner, Matthias T1 - Zerstörungsfreie Prüfung von Feinblechen T2 - Sensor & Test CY - Nürnberg DA - 2015-05-19 PY - 2015 AN - OPUS4-34648 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pelkner, Matthias T1 - Zerstörungsfreie Prüfung von Feinblechen T2 - Control CY - Stuttgart DA - 2015-05-05 PY - 2015 AN - OPUS4-34649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Radsatzwellenprüfung im eingebauten Zustand T2 - DACH-Jahrestagung 2015 CY - Salzburg DA - 2015-05-11 PY - 2015 AN - OPUS4-34650 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine T1 - Comparison of non-destructive moisture measurement methods on cement and calcium sulphate based screed samples T2 - NDT-CE 2015 CY - Berlin, Germany DA - 2015-09-15 PY - 2015 AN - OPUS4-34651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine T1 - Multi-sensor investigation of concrete moisture using ultrasound, radar and microwave T2 - NDT-CE 2015 CY - Berlin, Germany DA - 2015-09-15 PY - 2015 AN - OPUS4-34652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Nichtelektrischer Explosionsschutz - Mechanisch erzeugte Funken als Zündquelle T2 - Ausbildung zum Explosionsschutzbeauftragten ( Veranstaltungsnr. H050-11-621-5) CY - Haus der Technik - Außeninstitut, Außenstelle, Berlin Alexanderplatz DA - 2015-11-10 PY - 2015 AN - OPUS4-34889 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar T1 - Sicherheitstechnische Kenngrößen von Gassen und Gasgemischen T2 - DECHEMA-Weiterbildungskurs "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" CY - Frankfurt am Main DA - 2015-11-11 PY - 2015 AN - OPUS4-34890 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - Normung im Bereich des Explosionsschutzes : - nicht elektrisch - T2 - DECHEMA-Weiterbildungskurs "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" CY - Frankfurt am Main DA - 2015-11-11 PY - 2015 AN - OPUS4-34891 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - Rechtliche Anforderungen des Explosionsschutzes: Einordnung des Explosionsschutzes im System der gesetzlichen Regelungen T2 - DECHEMA-Weiterbildungskurs "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" CY - Frankfurt am Main DA - 2015-11-11 PY - 2015 AN - OPUS4-34893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baumann, Axel T1 - Membrane proteine folding into solid-supported lipidic nandisc during cell-free exression: in-situ observation by Surface Enhanced IR Absorption Spectroscopy T2 - Faltertage 2015 CY - Halle (Saale), Germany DA - 2015-10-22 PY - 2015 AN - OPUS4-34842 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zencker, Uwe T1 - Dynamic Finite Element Analysis of Cask Handling Accidents at Storage Sites T2 - ASME 2015 Pressure Vessels & Piping Conference (PVP2015) CY - Boston, MA, USA DA - 2015-07-19 PY - 2015 AN - OPUS4-34856 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolff, Dietmar T1 - Zentrale Koordinierungsstelle für Informationen zur Behälterabfertigung (KOBAF) - Erfahrungen und Perspektiven T2 - 7. Symposium Lagerung und Transport radioaktiver Stoffe CY - Hannover DA - 2015-11-25 PY - 2015 AN - OPUS4-34857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogl, Jochen T1 - Isotope Ratio Measurements T2 - SALSA "Challenge Session" CY - Humboldt-Universität zu Berlin, Berlin DA - 2015-10-20 PY - 2015 AN - OPUS4-34860 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günster, Jens T1 - Dense Powder beds for powder-based additive manufacturing of ceramics T2 - EUROMAT 2015 CY - Warsaw, Poland DA - 2015-09-20 PY - 2015 AN - OPUS4-34863 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane T1 - A round robin test of flash thermography of CFRP and metal structures T2 - NDT in Aerospace 2015 CY - Bremen DA - 2015-11-16 PY - 2015 AN - OPUS4-34868 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sproesser, Gunther T1 - Sustainable welding process selection based on weight space partitions T2 - The 13th Global Conference on Sustainable Manufacturing CY - Ho Chi Minh City & Binh Duong, Vietnam DA - 2015-09-16 PY - 2015 AN - OPUS4-34844 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Korrosionsverhalten nichtrostender Stähle in Meerwasser und maritimer Atmosphäre T2 - Hafentechnische Gesellschaft (HTG) Workshop "Korrosionsschutz für Meerwasserbauwerke" CY - Hamburg DA - 2015-11-05 PY - 2015 AN - OPUS4-34851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Bestimmung der Korrosionsbeständigkeit nichtrostender Stähle durch die Verarbeiter T2 - Fachtagung Edelstahl Rostfrei "Fachgerechte Auswahl und Verarbeitung" CY - Großenhain DA - 2015-11-13 PY - 2015 AN - OPUS4-34853 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Behälterfertigung - Qualitätsüberwachung T2 - 7. Symposium Lagerung und Transport radioaktiver Stoffe CY - Hannover DA - 2015-11-25 PY - 2015 AN - OPUS4-34854 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Smart Geosynthetics for Structural Health Monitoring Using Fully Distributed Fiber Optic Sensors T2 - 6th International Technical Textiles Congress CY - Izmir, Turkey DA - 2015-10-14 PY - 2015 AN - OPUS4-34825 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pfennig, Anja T1 - Einfluss der Wärmebehandlung auf die Korrosionsbeständigkeit von hochlegierten Chromhaltigen Stählen unter CCS-Bedingungen T2 - Kraftwerksforum 2015 CY - Dresden, Germany DA - 2015-10-13 PY - 2015 AN - OPUS4-34828 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar T1 - Verlässliche Datenquellen - Sicherheitstechnische Kenngrößen in der Datenbank "CHEMSAFE" T2 - DECHEMA-Weiterbildungskurs "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" CY - Frankfurt am Main DA - 2015-11-11 PY - 2015 AN - OPUS4-34895 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar T1 - Grundlagen des Explosionsschutzes - Eine Einführung T2 - DECHEMA-Weiterbildung "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" CY - Frankfurt am Main DA - 2015-11-11 PY - 2015 AN - OPUS4-34896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosemann, Paul T1 - Einfluss der Wärmebehandlung auf die Korrosionsbeständigkeit martensitisch nichtrostender Stähle T2 - Arbeitskreissitzung der GfKORR e. V., AK "Korrosionsuntersuchung und -überwachung" CY - Celle DA - 2015-10-15 PY - 2015 AN - OPUS4-34898 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosemann, Paul T1 - Influence of nitrogen on the corrosion resistance of martensitic stainless steels T2 - EUROCORR 2015 CY - Graz DA - 2015-09-06 PY - 2015 AN - OPUS4-34899 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fettig, Ina T1 - Method development for mercury specification in biota T2 - SETAC GLB "Ökotoxikologie und Umweltchemie" CY - Zürich DA - 2015-09-07 PY - 2015 AN - OPUS4-34904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosemann, Paul T1 - Using TC for understanding the effect of heat treatment on corrosion resistance of martensitic stainless steels T2 - Thermocalc Anwendertreffen CY - Aachen DA - 2015-09-03 PY - 2015 AN - OPUS4-34905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosemann, Paul T1 - Einfluss der Wärmebehandlung auf die Korrosionsbeständigkeit martensitisch nichtrostender Stähle T2 - 12. Magdeburger Maschinenbau-Tage CY - Magdeburg DA - 2015-09-30 PY - 2015 AN - OPUS4-34906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balcazar Pust, Emilio T1 - Sicherheitstechnische Untersuchungen zum Einsatz von Mikroreaktoren im Explosionsbereich T2 - Technisch-Chemisches-Kolloquium, Institut für Technische Chemie, Universität Stuttgart CY - Stuttgart DA - 2013-11-19 PY - 2013 AN - OPUS4-34907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balcazar Pust, Emilio T1 - Hotspots as Ignition Sources in Micro Reactors T2 - ESCRE 2015 - European Symposium on Chemical Reaction Engineering CY - Fürstenfeldbruck DA - 2015-10-27 PY - 2015 AN - OPUS4-34908 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balcazar Pust, Emilio T1 - Bestimmung der Zündtemperatur in Mikroreaktoren T2 - 12. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen DA - 2015-11-05 PY - 2015 AN - OPUS4-34909 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balcazar Pust, Emilio T1 - Bestimmung der Zündtemperatur in Mikroreaktoren T2 - Technisch-Chemisches Kolloquium, Institut für Technische Chemie, Universität Stuttgart CY - Stuttgart DA - 2015-11-17 PY - 2015 AN - OPUS4-34911 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kreutzbruck, Marc T1 - Metal Magnetic Memory T2 - 68th IIW Annual Assembly & International Conference CY - Helsinki (Finnland) DA - 2015-06-28 PY - 2015 AN - OPUS4-34912 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pelkner, Matthias T1 - Eddy current testing with high-spatial resolution probes using MR arrays as receivers T2 - 7th International Symposium on NDT in Aerospace CY - Bremen DA - 2015-11-16 PY - 2015 AN - OPUS4-34913 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf T1 - Schienenprüfung mit Wirbelstrom N2 - Ausgehend von einer Machbarkeitsstudie im Jahr 1999 wurde von der BAM in Zusammenarbeit mit der DB AG und verschiedenen anderen Partnern ein Schienenprüfsystem zur Detektion und Bewertung von Schienenfehlern des Typs Head Checks entwickelt. Dieses Prüfsystem arbeitet nach dem Wirbelstromprinzip. Die Firma Prüftechnik Linke & Rühe GmbH aus Magdeburg fertigt und vertreibt seit geraumer Zeit verschiedene manuelle und zuggestützte Prüfsysteme, die auf dieser Entwicklung basieren. Seit Januar 2013 wird in Deutschland der Qualitätsnachweis nach der Schienenbearbeitung mittels Wirbelstromprüfung gefordert. Im Laufe der Entwicklungsarbeiten wurden verschiedentlich benachbarte Themenfelder rund um die Prüfung auf Head Checks gestreift. Der Schwerpunkt dieses Vortrages liegt auf diesen erweiterten Möglichkeiten der magnetinduktiven Prüfung von verlegten Schienen. Hierbei wird sowohl auf die Verbesserung der Möglichkeiten des bestehenden Systems (z. B. durch Kopplung mit anderen Prüfverfahren) als auch auf mögliche Neuentwicklungen (z. B. durch Einsatz neuer Sensorik) eingegangen. Angestrebte Ziele sind z. B. die Verbesserung der Prüfaussage bei der Head Check Prüfung, Erweiterung der Prüfaussage auf andere Schienenfehlertypen oder die Bestimmung von Schieneneigenschaften wie Härte und Rauigkeit. T2 - ZfP im Eisenbahnwesen CY - Wittenberge DA - 15.03.2016 KW - Schienenprüfung KW - Wirbelstromprüfung KW - Zerstörungsfreie Prüfung PY - 2016 AN - OPUS4-35516 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Oesch, Tyler T1 - In-situ CT investigation of pull-out failure for reinforcing bars embedded in conventional and high-performance concretes N2 - The use of high-performance concretes holds great promise for many structural applications. This paper investigates the performance of these materials when used in combination with traditional reinforcing bars. An improved understanding of failure during reinforcing bar pull-out from high-performance concretes is needed in order to better predict the embedment length required to develop full reinforcing bar pull-out strength and the required thickness of reinforcing bar cover for adequate corrosion protection. The cracking structures surrounding the reinforcing bars were analyzed using x-ray computed tomography (CT) in order to determine the stress states causing failure. This was accomplished by conducting in-situ reinforcing bar pull-out experiments during CT scanning. A conventional concrete, a high-strength concrete, and a high-strength fiber reinforced concrete were all tested during the experiments. The results of these experiments showed that the levels of brittleness of the different concrete materials had a major impact on the failure mechanisms that they experienced during reinforcing bar pull-out. It was also clear that the specimen geometry and the casting method had a major impact on fiber orientation. The inclusion of fibers within concrete was also found to significantly improve strength and corrosion protection during reinforcing bar pull-out. T2 - 6th Conference on Industrial Computed Tomography CY - Wels, Austria DA - 09.02.2016 KW - Fiber KW - Reinforcing Bar KW - Computed Tomography KW - In-Situ KW - High-Performance Concrete PY - 2016 AN - OPUS4-35521 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balke, Christian T1 - Freier Einsatz von Druckbehältern N2 - Freier Einsatz von Druckbehältern T2 - Sonderkolloquium in der BAM: Europäisches technisches Recht und seine Bedeutung für die BAM CY - Berlin, Germany DA - 2001-01-10 KW - europäische Richtlinien KW - Druckgeräte-Richtlinien KW - Seveso-II-Richtlinie PY - 2001 AN - OPUS4-35464 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Zentrale Koordinierungsstelle für Informationen zur Behälterabfertigung (KOBAF/BIBO) - Einrichtung und erste Betriebsphase N2 - Im Zusammenhang mit dem Ausstiegsbeschluss der Bundesregierung zur Nutzung der Kernenergie und der zugehörigen Vereinbarung mit den Energieversorgungsunternehmen vom 11. Juni 2001 wurde auch die Beschränkung der Entsorgung auf die direkte Endlagerung bestrahlter Brennelemente sowie die Verpflichtung zur Errichtung und Nutzung von dezentralen Zwischenlagern an den Kraftwerksstandorten vereinbart. Dieser Verpflichtung wurde mit der Beantragung und Genehmigung von insgesamt 12 Standortzwischenlagern bis Ende 2003 sowie vorlaufend 4 sog. Interimslagern entsprochen. Darüber hinaus bestehen weiterhin die bereits genehmigten zentralen Zwischenlager in Ahaus und Gorleben sowie das AVR-Behälterlager Jülich und das Zwischenlager Nord (ZLN) in Lubmin bei Greifswald. Die Zwischenlagerung bestrahlter Brennelemente und hochradioaktiver Abfälle aus der Wiederaufarbeitung erfolgt in Deutschland in Transport- und Lagerbehältern. Diese Behälter verfügen einerseits als Transportbehälter über eine verkehrsrechtliche Zulassung des Bundesamtes für Strahlenschutz (BfS) auf der Grundlage einer umfassenden Bauartprüfung durch die BAM gemäß den Vorgaben des Gefahrgutrechts auf der Basis der Internationalen IAEA-Regulations. Andererseits ist die Zwischenlagerung dieser Behälter in den o. g. Zwischenlagern auf der Grundlage des Atomgesetzes (AtG) vom BfS gesondert genehmigt. Voraussetzung für die Annahme und Einlagerung der beladenen Behälter in ein Zwischenlager ist u.a. die Einhaltung zahlreicher technischer Anforderungen an die Qualität, die Eigenschaften und den Zustand der Behälter und deren Inventar. Diese Anforderungen sind in den jeweiligen lagerspezifischen „Technischen Annahmebedingungen“ festgeschrieben. Sie reichen von den Nachweisen über die ordnungsgemäße Herstellung jedes einzelnen Behälters einschließlich aller seiner Komponenten bis hin zu den Abfertigungsvorschriften zur Montage der Deckel-Dichtsysteme nach der Behälterbeladung im KKW. T2 - 4. Symposium Lagerung und Transport radioaktiver Stoffe CY - Hannover, Germany DA - 2005-06-14 KW - Behälterabfertigung KW - KOBAF KW - BIBO PY - 2005 AN - OPUS4-35466 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stroh, Julia T1 - In situ Untersuchungen von Hydratations- und Schädigungsmechanismen an Baustoffen N2 - In diesem Vortrag werden hochauflösende analytische Methoden für die Untersuchungen von zementgebundenen Baustoffen vorgestellt. Zum einen werden frühe Hydratationsprozesse in situ und mit hoher Zeitauflösung untersucht und die Einflüsse von polymeren Fließmittel und Stabilisierer auf die Erstarrungsverzögerung beobachtet. Zum anderen werden Phasenübergänge unter schädigenden Angriffen im Gefügeprofil auf µm-Skala verfolgt. Die Möglichkeit die Auswirkungen der niedrigen realen Konzentrationen von schädigenden Agenten zu identifizieren stellt ein großes Potential für die Schädigungsanalyse unter realen Bedingungen dar. Insgesamt haben die vorgestelletn analytischen Techniken ein großes Potential für die Analyse der Phasenentwicklung in zementgebundenen Baustoffen. T2 - Gemeinsamer Workshop der Sektion Angewandte Mineralogie in Umwelt & Technik und der Sektion Chemie, Physik und Kristallographie der Minerale von der Deutschen Mineralogischen Gesellschaft CY - Bad Windsheim, Germany DA - 24.02.2016 KW - Portlandzement KW - Hydratation KW - Additive KW - Schädigung KW - komplexe Angriffe PY - 2016 AN - OPUS4-35469 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stroh, Julia T1 - High resolution in situ monitoring of the initial cement hydration influenced by organic admixtures N2 - Numerous admixtures are used in the building practice to customize the properties of the cement paste during application. The influences of admixtures on the course of cement hydration and formation of hydrate phases have to be considered. Polycarboxylate ether (PCE) based polymeric superplasticizers (SPs) are known to retard the setting of the cement paste. The extent of the retardation differs depending on the molecular structure of the SP. Additionally, the presence of a stabilizing agent (SA) in the cement paste has a retarding side effect on the setting. The initial cement hydration processes and the detailed mechanisms of the retardation influenced by PCEs, as well as their interactions with particular SAs, are insufficiently understood. Up to now, only the results of phenomenological studies were taken into account to describe this retardation process. A detailed structure analysis monitoring the change of the phase composition during the hydration was never applied. Both SP and SA affect the adsorption of the sulphate ions on the clinker particles, causing changes in the formation of ettringite during the initial hydration, and are therefore a crucial part of the setting process itself. Here, the initial hydration of cement influenced by the interaction of SP and SA was monitored in situ by synchrotron X-ray diffraction. The high time resolution of the measurements allowed a continuous detection of the hydrates formed. The hydration was followed from the starting point of water addition and for couple of hours afterwards. The hydration of the levitated cement pellets containing starch as SA was initialized by adding aqueous solutions of different commercial SPs. Changes in the ettringite formation were detected in comparison to the reference hydration of pure cement. T2 - Early Age Concrete: From the Research Lab to the Construction Site CY - Tomsk, Russia DA - 02.06.2015 KW - Portland cement KW - Initial hydration KW - Superplasticizer KW - Stabilizer KW - Synchrotron XRD PY - 2015 AN - OPUS4-35470 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taabache, Soraya T1 - Microfluidic-Assisted Self-Assembly of Dendritic Amphiphiles N2 - The controlled production of supramolecular aggregates formed by the self-assembly of dendritic amphiphiles is of great interest owing to their potential application in the fields of nanotechnology and nanomedicine. Dendritic amphiphiles as building blocks offer the advantage that their structure and size can be precisely tuned through organic synthesis. This synthetic flexibility enables the fine-tuning of the hydrophobic to hydrophilic ratio of the dendritic segments, which mainly controls the morphology of the self-assembled structures. A promising method for the controlled preparation of supramolecular assemblies is based on the use of micromixers.[5,6] Due to their mixing times in the range of milliseconds at the microscale level, the application of such microfluidic systems benefits from a high mixing efficiency, a low mixing time and a reproducible synthesis compared to conventional batch-based techniques such as the solvent injection method or the film hydration method. Herein, we report on the microfluidic-assisted self-assembly of several dendritic amphiphiles and the impact of the mixing parameters on the self-assembly process. T2 - Makromolekulares Kolloquium 2016 CY - Freiburg im Breisgau, Germany DA - 24.02.2016 KW - Dendritic amphiphiles KW - Self-assembly KW - Dendrimersomes KW - Micromixer KW - Microfluidic PY - 2016 AN - OPUS4-35477 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenberg, Rainer T1 - Simulation von Rißwachstum durch ein thermodynamisch konsistentes Phasenfeldmodell N2 - Durch ein thermodynamisch konsistentes Phasenfeldmodell kann die Rißinitiierung sowie das Rißwachstum in einem spröden Material mit Hilfe der Finite-Elemente-Methode simuliert werden. Ein diskreter scharfer Riß wird durch einen Regularisierungsansatz in ein Phasenfeld überführt, das einen kontinuierlichen Übergang zwischen Riß und Restmaterial abbildet. Modelle von C(T) - Bruchmechanikproben konnten unter monoton wachsender Belastung simuliert werden. Die Ergebnisse konnten mit analytischen Ergebnissen der linear-elastischen Bruchmechanik verglichen werden. Ablenkungen des Rißpfades konnten durch Modelle von gelochten Proben simuliert werden. An dem Modell eines Dreipunktbiegeversuchs konnte die Rißinitiierung demonstriert werden. Die Kenntnis und Modellierung eines vordefinierten Rißpfades ist bei Verwendung dieses Modells nicht erforderlich, was insbesondere zur Untersuchung von komplexen Rißpfaden von Vorteil sein kann. T2 - 48. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit CY - Freiburg in Breisgau, Germany DA - 16.02.2016 KW - Simulation KW - Rißwachstum KW - Phasenfeldmodell PY - 2016 AN - OPUS4-35485 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wloka, Monika T1 - Binnenmarktrichtlinien - Konformitätsbewertung N2 - Binnenmarktrichtlinien - Konformitätsbewertung T2 - Sonderkolloquium in der BAM: Europäisches technisches Recht und seine Bedeutung für die BAM CY - Berlin, Germany DA - 2000-11-17 KW - technische Harmonisierung KW - technische Handelshemnisse KW - CE-Kennzeichnung PY - 2000 AN - OPUS4-35492 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Elabshihy, Karim T1 - Nano-mechanical characterization of epoxy/Cu interphase N2 - Characterization of the mechanical properties of interphases is essential when designing multicomponent materials such as fiber-reinforced matrices, protective coatings or multi-layered structures for integrated circuits. It can provide vital information about the durability of the finished product as a composite because failure is often initiated in the interfacial region induced by internal or external stress during fabrication or service. Nanoindentation is a powerful tool for investigating mechanical properties on the micro/nano scale. However, there are some challenges associated with conducting nanoindentation near interface regions. One main challenge is that the small thickness of the interphase region (typically 1-2µm) makes it difficult to apply several adjacent indents without overlap. Another issue is that the indentations are usually restricted by local reinforcement, and it becomes difficult to isolate the change in mechanical properties due solely to interphase formation. In this study we try to gauge the feasibility of nanoindentation for characterizing epoxy/Cu interphases. We develop a sample preparation method and optimize nanoindentation parameters in an attempt to avoid the restrictions mentioned above. Atomic force microscopy (AFM) and finite element analysis are employed as reference techniques to evaluate the effectiveness of our technique. We show the influence of preparation method and nanoindentaion parameters on measurements of interphase properties and how they relate the mentioned challenges. T2 - Nanobrücken 2016 CY - Saarbrücken, Germany DA - 02.03.2016 KW - Composite KW - Epoxy KW - Interphase KW - Nanoindentation PY - 2016 AN - OPUS4-35496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kronemann, Jens T1 - Zur zeitlichen Abhängigkeit von Löseprozessen in hochalkalischen Lösungen zur Charakterisierung der Alkaliempfindlichkeit von Gesteinskörnungen N2 - Die schädigende Alkali-Kieselsäure-Reaktion (AKR) im Beton stellt in Teilbereichen nach wie vor ein Problem bei der Bewertung der Dauerhaftigkeit von Beton dar. Eine der häufigsten Fragestellungen ist immer noch eine schnelle und sichere Beurteilung der Alkaliempfindlichkeit von Gesteinskörnungen für die Betonherstellung. In der Präsentation wird gezeigt, welchen Beitrag die Gesteinskörnung zur AKR im Beton hat. Dabei wird die Alkaliempfindlichkeit von Gesteinskörnungen quantifiziert und die zu erwartende Schädigung des Betons durch die Gesteinskörnung detaillierter als bisher möglich klassifiziert. Im Vordergrund der Präsentation steht dabei das Verständnis der Auflösungsprozesse von Gesteinskörnungen in KOH-Lösungen (pH ≥ 13) bei unterschiedlichen Reaktionsbedingungen. Anhand von Löseversuchen an den originalen Lieferkörnungen der Gesteinskörnungen bei 40 °C und mit 1,0 M KOH-Lösung ist es möglich, die Reaktivität der Gesteinskörnungen mit den ermittelten SiO2- und Al2O3-Konzentrationen der alkalischen Lösungen zu beschreiben. Durch eine erhöhte Temperatur von 80 °C und eine abgesenkte Konzentration der KOH-Lösung von 0,1 M können innerhalb von 56 Tagen vergleichbare Ergebnisse zu den Resultaten der Löseversuche bei 40 °C und 1,0 M KOH-Lösung erreicht werden. In der alkalischen Lösung wird ein bestimmter Teil des gelösten SiO2 durch ebenfalls vorhandenes Al2O3 alumosilikatisch gebunden. Der verbleibende Teil des gelösten SiO2 steht für eine AKR zur Verfügung. Aus der zeitabhängigen Darstellung dieser SiO2-Konzentration wird die Lösegeschwindigkeit ermittelt. Dabei werden vier aufeinanderfolgende Phasen dem Dehnungs- und Rissbreitenverlauf der Probekörper des 40 °C-Betonversuchs zugeordnet. Zur Beurteilung der Alkaliempfindlichkeit einer Gesteinskörnung sind die Lösegeschwindigkeiten der letzten drei Phasen entscheidend. Die Methode bietet eine Möglichkeit, die Alkaliempfindlichkeit einer Gesteinskörnung schnell, sicher und genauer als bisher zu bestimmen. Besonders vorteilhaft sind dabei die direkte Prüfung der Gesteinskörnung an der originalen Korngröße (Lieferkörnung), die zementunabhängige Prüfung, sowie die einfache experimentelle Durchführung und Auswertung. T2 - 15. Baustoffkolloquium CY - Cottbus, Germany DA - 08.03.2016 KW - Alkali-Kieselsäure-Reaktion KW - Alkaliempfindlichkeit KW - Gesteinskörnung KW - Lösegeschwindigkeit KW - Löslichkeit KW - Aggregate KW - Alkali reactivity KW - Alkali-silica reaction KW - Dissolution rate KW - Solubility PY - 2016 AN - OPUS4-35607 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Otremba, Frank T1 - Gefahrguttanks N2 - Einführung in die Gefahrgutvorschriften ADR/RID Bewertungskonzepte für Druckbehälter und Gefahrguttanks Berücksichtigung auslegungsüberschreitender Belastungen Forschungsergebnisse T2 - Wirtschaft trifft Wissenschaft CY - Cottbus - Senftenberg, Germany DA - 10.03.2016 KW - Gefahrgutvorschriften KW - Wärmebehandlung PY - 2016 AN - OPUS4-35549 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten N2 - Bei elektrochemischen Untersuchungen von atmosphärischen Korrosionsreaktionen an deckschicht- und passivschichtbildenden Werkstoffen stößt man elektrolytseitig an Grenzen. So erweisen sich sowohl das Nachempfinden eines dünnen Feuchtfilms als auch die Interpretation von elektrochemischen Messungen in so genannten Bulk-Lösungen (eine „Masse“ an Elektrolyt) hinsichtlich des Korrosionsverhaltens unter atmosphärischen Bedingungen häufig als schwierig. Eine neue Herangehensweise an diese Problemstellung in der Korrosionsforschung beinhaltet den Einsatz von gelartigen Elektrolyten als Alternative zu den Bulk-Elektrolyten. Gelartige Elektrolyte bilden einen dünnen Feuchtfilm auf der Werkstoffoberfläche aus, wodurch die natürlich gebildete Deckschicht ähnlich wie an Atmosphäre beeinflusst wird und nahezu zerstörungsfrei untersucht werden kann. Durch eine elektrochemische Instrumentierung können geeignete Kennwerte wie Polarisationswiderstände und Korrosionsströme ermittelt werden, die Aussagen zur Kinetik der Deckschichtbildung und zur Stabilität der gebildeten Deckschichten unter Einwirkung eines dünnen Feuchtfilms ermöglichen. Anhand von auf Polysaccharid basierenden Gelpads werden im Vortrag verschiedene Zinkschichtsysteme und Aluminiumlegierungen untersucht, die natürlich gebildeten Deckschichten elektrochemisch charakterisiert und korrosionsrelevante Kennwerte bestimmt. Die ermittelten Kennwerte erlauben eine Differenzierung verschiedener Schichtsysteme und beschreiben die momentane Schutzwirkung der Deckschichten unter atmosphärischen Bedingungen. T2 - 18. Werkstofftechnisches Kolloquium der TU Chemnitz CY - Chemnitz, Germany DA - 10.03.2016 KW - gelartige Elektrolyte KW - Verzinkungen KW - Korrosionsuntersuchungen KW - gel-type electrolytes KW - zinc coatings KW - corrosion investigations PY - 2016 AN - OPUS4-35552 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leng, Jing T1 - Crystallization behavior of nanocomposites based on Polylactide – Rigid Amorphous Phase due to the Nanofiller N2 - Two kinds of synthesized NiAl (NiAl-LDH) and MgAl (MgAl-LDH) layered double hydroxides were melt blended with commercial polylactide to prepare different polymer based nanocomposites. The MgAl-LDH based nanocomposites and NiAl-LDH based nanocomposites have a diferent but mixed intercalated / exfoliated structure. Based on the different structures, the crystallization behaviors of polymer based nanocomposites were investigated by differential scanning calorimetry (DSC) and temperature modulated differential scanning calorimetry (TMDSC) specificly where the heating and cooling rates were varied in a extrmely wied range. In a first step, the cooling rate where crystallization can be completely surpressed is estimated. In a second step, based on a specified temperature program the crystalline fraction (CF), the rigid amorphous fraction (RAF) and the mobile amorphous fraction (MAF) were calculated from the the enthalpy and specific heat capacity in dependence on the concentration of the nanofiller. The rigid amorphous fraction was considered as resulting from the the crystallites and the nanofiller. For the first time both fractions were calculated quantitatively without any additional assumption. T2 - 80. Jahrestagung der DPG und DPG-Frühjahrstagung CY - Regensburg, Germany DA - 06.03.2016 KW - Polylactide KW - Layered Doubled Hydroxide KW - Rigid Amorphous Physe PY - 2016 AN - OPUS4-35561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiel, Erik T1 - Spatial and temporal control of thermal waves by using DMDs for interference based crack detection N2 - Active Thermography is a well-established non-destructive testing method and used to detect cracks, voids or material inhomogeneities. It is based on applying thermal energy to a samples’ surface whereas inner defects alter the non-stationary heat flow. Conventional excitation of a sample is hereby done spatially, either planar (e.g. using a lamp) or local (e.g. using a focused laser) and temporally, either pulsed or periodical. In this work we combine a high power laser with a Digital Micromirror Device (DMD) allowing us to merge all degrees of freedom to a spatially and temporally controlled heat source. This enables us to exploit the possibilities of coherent thermal wave shaping. Exciting periodically while controlling at the same time phase and amplitude of the illumination source induces – via absorption at the sample’s surface - a defined thermal wave propagation through a sample. That means thermal waves can be controlled almost like acoustical or optical waves. However, in contrast to optical or acoustical waves, thermal waves are highly damped due to the diffusive character of the thermal heat flow and therefore limited in penetration depth in relation to the achievable resolution. Nevertheless, the coherence length of thermal waves can be chosen in the mm-range for modulation frequencies below 10 Hz which is perfectly met by DMD technology. This approach gives us the opportunity to transfer known technologies from wave shaping techniques to thermography methods. We will present experiments on spatial and temporal wave shaping, demonstrating interference based crack detection. T2 - Photonics West 2016, OPTO, 9761 CY - San Francisco, Cal, USA DA - 15.02.2016 KW - Thermal Waves KW - Laser KW - DMD KW - Active Thermography PY - 2016 AN - OPUS4-35586 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Wilhelm T1 - Korrosion in Trinkwasserinstallationen N2 - Überblick über das Verhalten und mögliche Schadensszenarien von metallenen Werkstoffen im Kontakt mit Trinkwasser. Insbesondere auch die Abgabe von Stoffen aus den Werkstoffen an das Wasser wird diskutiert, daneben auch Schäden, die zum austritt von Wasser aus den Anlagen führen. T2 - Wehrtechnisches Symposium der Bundeswehr: Wassertechnik und Hygiene CY - Mannheim, Germany DA - 14.03.2016 KW - Trinkwasser KW - Korrosion KW - Metallabgabe PY - 2016 AN - OPUS4-35567 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Jens T1 - KorroPad - Beurteilung der Korrosionsbeständigkeit von Oberflächen nichtrostender Stähle N2 - Mit dem KorroPad Verfahren ist es dem Anwender möglich den Zustand der Passivschicht nichtrostender Stähle auf sehr einfache und schnelle Weise einschätzen zu können. Das Verfahren eignet sich dazu, den Grad der Passivität in Abhängigkeit der Umgebungsbedingungen und der Zeit nachzuvollziehen. Dies ermöglicht dem Anwender und Verarbeiter von nichtrostenden Stählen, die Lagerungsbedingungen und –zeiten einer frisch bearbeiteten Stahloberfläche zu ermitteln, welche für die Ausbildung einer stabilen Passivschicht notwendig sind, bevor diese risikoarm eingesetzt werden kann. Wie die hier dargestellten Beispiele und auch weitere zahlreiche praktische Anwendungen gezeigt haben, eignet sich das KorroPad ebenfalls für die Identifikation kritischer Prozessparameter bei der Verarbeitung nichtrostender Stähle. Mit dem Verfahren lassen sich viele prozessbedingte Einflussfaktoren auf die Oberflächengüte wie auch auf den Werkstoff charakterisieren. Aufgrund der schnellen und einfachen Auswertung der Prüfergebnisse können positive wie auch negative Veränderungen hinsichtlich der Passivschichtstabilität zügig erkannt werden. Dies ermöglicht es dem Anwender schnell zu reagieren, um kritische Einflüsse zu korrigieren und um eine Optimierung von Inhouse-Prozessen durchzuführen. Weitere Einsatzgebiete sind im Bereich der Wareneingangs- und/oder Warenausgangskontrolle denkbar, überall wo es um die Frage der Passivschichtstabilität einer nichtrostenden Stahloberfläche geht. T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Germany DA - 25.02.2016 KW - Korrosionsschnelltest KW - nichtrostender Stahl KW - Passivschicht KW - KorroPad PY - 2016 AN - OPUS4-35570 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogl, Jochen T1 - Platin- und Palladium-Analytik mit ID-ICPMS N2 - Zertifizierung von Pt und Pd-Spikes und deren Anwendung auf die Quantifizierung von Pd und Pt in Kfz-Emissionen T2 - 15. Edelmetallforum CY - Freising, Germany DA - 14.03.2016 KW - PGE KW - Emissionen KW - IDMS KW - ICPMS PY - 2016 AN - OPUS4-35572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogl, Jochen T1 - Real-world examples of how to calculate a KCRV N2 - In this presentation the different ways are presented, which are used to calculate in practice the key comparison reference value. T2 - EURAMET TC Metrology in Chemistry Meeting CY - Geel, Belgium DA - 03.02.2016 KW - key comparison KW - CCQM KW - Degree of equivalence PY - 2016 AN - OPUS4-35573 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Unterstützung der Marktüberwachung - Steigerung der Glaubwürdigkeit produktbezogener Energieeffizienz-Instrumente der EU N2 - Vorstellung eines Projektes zur Evaluierung bestehender Prüfmethoden und zur Entwicklung von Werkzeugen für die Marktüberwachung. T2 - Experten-Workshop des VZBZ CY - Berlin, Germany DA - 07.03.2016 KW - Marktüberwachung KW - Ökodesign KW - Energieverbrauchskennzeichnung PY - 2016 AN - OPUS4-35530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Ökodesign und Industrieprodukte - Tendenzen der Marktüberwachungsaktivitäten N2 - Sachstandbericht zu der Entwicklung gesetzlicher Auflagen zum in Verkehr bringen von Elektromotoren und den entsprechenden Aktivitäten der Marktüberwachung. T2 - 14. Technischer Tag der VEM Gruppe CY - Wernigerode, Germany DA - 15.09.2015 KW - Marktüberwachung KW - Elektromotoren KW - Industriegüter PY - 2015 AN - OPUS4-35532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Elabshihy, Karim T1 - Investigation of the time-dependent behavior of cnt-filled epoxy using nanoindentation N2 - Epoxy/Carbon nanotube (CNT) composites are interesting materials that could be used in a wide variety of applications. In this study, CNT contents of 0.25, 0.5, 1 and 2 wt% were used for reinforcing epoxy. A nanoindentation device and a temperature regulating system were developed in order to investigate the effect of CNTs on the time-dependent properties of epoxy using relaxations and creep tests on the nano scale. The relaxation tests showed a significant shift for the relaxation spectrum towards shorter times with introducing a low CNT content of 0.25 wt%. Additionally, creep tests showed that both the holding time at a constant load and the unloading velocity have a major effect on the contact stiffness. However, there was no effect for the CNTs on the creep behavior with contents lower than 1 wt%, which was related to the presence of a percolation threshold around this value. T2 - Nanobrücken 2013 CY - Dresden, Germany DA - 20.03.2013 KW - Epoxy KW - CNT KW - Time-dependent KW - Nanoindentation PY - 2013 AN - OPUS4-35533 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -