TY - CONF A1 - Füllbrandt, Marieke T1 - The influence of a thermal and corrosive treatment on the interface properties of polymer/metal hybrids: Adhesion behaviour and polymer dynamics T2 - 20. International Conference on Composite Materials CY - Copenhagen/Denmark DA - 2015-07-19 PY - 2015 AN - OPUS4-34316 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröter, Maria-Astrid T1 - How to image vibrating spatial MEMS structures? T2 - Microscopy Conference 2015 CY - Göttingen, Germany DA - 2015-09-06 PY - 2015 AN - OPUS4-34317 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Thoralf T1 - Corrosion protection of steel substrates by TiMgN thin films: The electrochemical effect of Mg on the improvement of the corrosion behaviour T2 - EuroMat 2015 European Congress and Exhibition on Advanced Materials and Processes CY - Warsaw, Poland DA - 2015-09-21 PY - 2015 AN - OPUS4-34318 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Standardization as a key tool to validate tribological test procedures T2 - International Tribology Conference/ITC 2015 CY - Tokyo, Japan DA - 2015-09-15 PY - 2015 AN - OPUS4-34320 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Hardmetals by using niobium carbides (NbC) of different stoichiometry and process routes for wear protection T2 - International Tribology Conference/ITC 2015 CY - Tokyo, Japan DA - 2015-09-15 PY - 2015 AN - OPUS4-34321 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Interrupted-milling and hard-turning of steel alloys using WC and NbC cemented carbides produced by PECS and LPS T2 - International Tribology Conference/ITC 2015 CY - Tokyo, Japan DA - 2015-09-15 PY - 2015 AN - OPUS4-34322 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf T1 - Ceramics and DLC - influence of tribochemistry on sliding under lubricated conditions at elevated temperatures T2 - Satelite Symposium on Tribochemistry CY - Nikko, Japan DA - 2015-09-13 PY - 2015 AN - OPUS4-34325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hohberg, Michaela T1 - Production process and characterization of sensitized all elastomeric POF T2 - The 24th International Conference on Plastic Optical Fibers (POF 2015) CY - Nuremberg, Germany DA - 2015-09-22 PY - 2015 AN - OPUS4-34326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siebler, Daniel T1 - A new generation of all-elastomeric fluorescent POF for sensor applications N2 - We present fundamentals for the selection of fluorescent dyes and show the challenges of the implementation of fluorescent dyes in silicone rubber materials for the production of fluorescent all-silicone rubber POF. T2 - 24th International Conference on Plastic Optical Fibers (POF 2015) CY - Nuremberg, Germany DA - 22.09.2015 KW - Sensor application KW - Elastomeric polymer optical fiber KW - Covalently bonded fluorescent KW - Dye KW - Silicone rubber PY - 2015 AN - OPUS4-34327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siebler, Daniel T1 - Optical-only detection of partial discharge with fluorescent polymer optical fiber sensors T2 - Eurosensors 2015 CY - Freiburg, Germany DA - 2015-09-06 PY - 2015 AN - OPUS4-34328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröter, Maria-Astrid T1 - Bridging the scales: Direct SEM imaging of nanometer vibrations for the analysis of stick-slip behaviour at microscales T2 - EGU 2012 CY - Vienna, Austria DA - 2012-04-22 PY - 2012 AN - OPUS4-34330 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin-Sanchez, Pedro Maria T1 - Quantitative PCR Assays for Monitoring Microorganisms Associated with Biodeterioration Cases T2 - XXV Spanish Microbiology Society Congress CY - Logrono, Spain DA - 2015-07-06 PY - 2015 AN - OPUS4-34255 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - Annual Report of SC V A "Radiography-based weld inspection" T2 - Annual Assembly of the International Institute of Welding 2015 CY - Helsinki, Finland DA - 2015-06-29 PY - 2015 AN - OPUS4-34562 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönhals, Andreas T1 - Influence of a nanoscale confinement on the dynamics of a discotic liquid crystal T2 - Neutron Scattering on Nano-Structured Soft Matter: Synthetic- and Bio.Materials CY - Tutzing, Germany DA - 2015-10-05 PY - 2015 AN - OPUS4-34569 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - BEGLARES II Protection and Restoration of Monumental Concrete-glazing with Cathodic Protection Systems T2 - 9th Forum for the conservation and technology of historic stained-glass CY - Paris, Frankreich DA - 2015-07-08 PY - 2015 AN - OPUS4-34571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - A NDT in Civil Engineering Software for Multiple Testing Methods T2 - International Conference of NDE/NDT for Highways and Bridges, Structural Materials Technology (SMT) CY - Oakland, CA, USA DA - 2008-09-08 PY - 2008 AN - OPUS4-34574 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Orrin-Seemann, Daniel T1 - Strain-based failure criterion for on-site risk evaluation for pressure vessels T2 - Erste Sitzung der Arbeitsgruppe Simulation des DVM-Arbeitskreises "Bauteilsicherheit und Bruchmechanik" CY - Kassel DA - 2015-10-06 PY - 2015 N1 - Geburtsname von Orrin-Seemann, Daniel: Seemann, D. - Birth name of Orrin-Seemann, Daniel: Seemann, D. AN - OPUS4-34575 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bettge, Dirk T1 - Korrosion von Stählen in überkritischem CO2 unter realitätsnahen Bedingungen T2 - Kraftwerkstechnische Kolloquium 2015 CY - Dresden, Germany DA - 2015-10-13 PY - 2015 AN - OPUS4-34578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Qiao, Linan T1 - Crushable Foam Model with Pressure and Stress-triaxiality Dependent Damage Mechanisms for Damping Concrete T2 - International Symposium Brittle Matrix Composites BMC-11 CY - Warsaw, Poland DA - 2015-09-28 PY - 2015 AN - OPUS4-34603 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Influencing factors on the inspection performance of wheel axle sets under training conditions T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34588 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yin, Huajie T1 - Thermal and Dynamic Glass Transition of Ultrathin Films of Homopolymers and Their Blends T2 - 27th GCCCD Annual Conference CY - Jena, Germany DA - 2015-08-28 PY - 2015 AN - OPUS4-34589 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hentrich, D. T1 - Monolayer-controlled biomimetic calcium phosphate mineralization: effect of a cholesterol-based Newkome amphiphile T2 - Ostwald Kolloquium CY - MPI-KGF Potsdam, Germany DA - 2015-09-28 PY - 2015 AN - OPUS4-34590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina T1 - New challenges for the quantification of the NDT reliability T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija T1 - Safety and organizational culture in NDT matter T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Influence of stoichiometry and processing on the tribological profile of hardmetals based on niobium carbide (NbC) T2 - International Conference on Powder Metallurgy & Particulate Materials CY - San Diego, USA DA - 2015-05-17 PY - 2015 AN - OPUS4-34640 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - The background for the use of hard metals and MMCs based on Niobium Carbide (NbC) as cutting tools and for wear resistant tribosystems T2 - International Conference on Stone and Concrete Machining (3rd ICSCM) CY - Bochum, Germany DA - 2015-11-02 PY - 2015 AN - OPUS4-34641 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Advanced NDT methods for the assessment of concrete structures T2 - International Conference on Concrete Repair, Rehabilitation and Retrofitting ICCRRR 2008 CY - Cape Town, South Afrika DA - 2008-11-24 PY - 2008 AN - OPUS4-34555 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert T1 - Praktische Anwendung zerstörungsfreier Prüfverfahren an Brücken T2 - 1. Brückenkolloquium an der TA Esslingen CY - Ostfildern, Deutschland DA - 2015-06-24 PY - 2015 AN - OPUS4-34557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - New Approach for Training in Digital Industrial Radiology considering ISO 9712:2012 and the IAEA guideline T2 - COTEQ 2015 Brasilien CY - Salvador, Pernambuco, Brasil DA - 2015-06-15 PY - 2015 AN - OPUS4-34558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - Neue ISO-Standards für die radiographische Schweißnahtprüfung mit Film oder digitalen Detektoren - DIN EN ISO 17636 T2 - Sitzung des DGZfP-Arbeitskreises Halle/Leipzig and er SLV Halle CY - Halle, Germany DA - 2015-04-22 PY - 2015 AN - OPUS4-34559 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - Filmersatz in der Radiographie und neue Regelwerke für Schweißnähte, Gussbauteile und Rohraufnahmen T2 - Sitzung des DGZfP-Arbeitskreises Siegen CY - Freudenberg, Germany DA - 2015-02-24 PY - 2015 AN - OPUS4-34560 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zscherpel, Uwe T1 - Recent requirements for Digital Radiography Substituting Film in different Industries and Standard Organizations T2 - Symposium on Digital Industrial Radiology 2015 CY - Ghent, Belgium DA - 2015-06-22 PY - 2015 AN - OPUS4-34561 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiel, Erik T1 - Advanced thermographic testing using DLP Technology T2 - 10th International Symposium on Emerging on Emerging and Idustrial DLP Technology Applications CY - Mainz DA - 2015-10-07 PY - 2015 AN - OPUS4-34625 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steckenmesser, D. T1 - Phosphorrecycling mittels einer Kombination aus Niedertemperaturkonvertierung und thermochemischer Nachbehandlung von Klärschlamm T2 - Jahrestagung der Deutschen Bodenkundlichen Gesellschaft (DGB) CY - München, Deutschland DA - 2015-09-05 PY - 2015 AN - OPUS4-34627 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - Die neue Herstellerrichtlinie 2014/34/EU T2 - 10. Tag des Explosionsschutzes CY - München DA - 2015-10-13 PY - 2015 AN - OPUS4-34632 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina T1 - Holistic Assessment of the Reliability of NDE T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34594 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanzler, Daniel T1 - How much information do we need? A reflection on the correct use of real defects in POD evaluations T2 - 6th European-American Workshop in Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34595 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gianneo, A. T1 - PAUT Inspection of Copper Canister: Structural Attenuation and POD Formulation T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34596 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holstein, R. T1 - How NDT is organized - Influence on the Reliability of NDE T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holstein, R. T1 - Basic considerations about reliability in testing railway axles T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34598 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bertovic, Marija T1 - Inspection Procedure in the Context of the Usability Framework - Human Factors Approach T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Léonard, Fabien T1 - Use of distance transforms and correlation maps for advanced 3D analysis of impact damage in composite panels T2 - 2nd International Conference on Tomography of Materials and Structures CY - Quebec, Canada DA - 2015-06-29 PY - 2015 AN - OPUS4-34600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate T1 - Luftultraschallprüfung von CFK mit senkrechter Einschallung und Schrägeinschallung T2 - DACH-Jahrestagung 2015 CY - Salzburg (Österreich) DA - 2015-05-11 PY - 2015 AN - OPUS4-34601 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Transformatoren, Netzteile und USV - Stand und Überwachung der EU-Verordnungen N2 - Zusammenfassung des Ökodesigns, Berichterstattung über den Stand der EU-Verordnungen, der diesbezüglichen Marktüberwachungstätigkeiten und Überblick über aktuelle Diskussionen bei der europäischen Kommission über Produktprüfungen von Industriegütern. T2 - Jahrestagung des ZVEI - Zentralverband Elektrotechnik- und Elektronikindustrie CY - Magdeburg DA - 11.04.2016 KW - Ökodesign KW - Marktüberwachung KW - Industriegüter PY - 2016 AN - OPUS4-35740 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - 2015 SRV global circular comparison results bulletin N2 - Tribological profile of hydraulic oils by using SRV. The determination of a set of critical, tribological by using different SRV-based test methods. The SRV-based concept of tribological profile generates the wear volumes on two triboelements (specimen), the extreme pressure properties and friction under different contact pressures. Thus, the benchmark and validation of hydraulic oils bear on a wider range of tribological properties. The RR2016 extends with six hydraulic oils to other base oil types including biodegradable fluids, which were all tested according to ASTM D7043 in order to consolidate the correlation between SRV and V104C. T2 - Working Group Meeting about SRV in China 2016 CY - Beijing, China DA - 05.04.2016 KW - SRV KW - Standards KW - China PY - 2016 AN - OPUS4-35744 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - 2016 SRV global circular comparison results bulletin N2 - Actions from the meeting in April 2016: 1. Four SAC test methods are in place and were revised: SH/T 0721 (Grease, coefficient of friction and wear), SH/T 0784 (Grease, pass load/O.K. load), SH/T 0847 (Oil, coefficient of friction and wear) and SH/T 0882 released by 11-2014 (Oil, pass load/O.K. load). 2. New test method to evaluate anti-fretting properties of greases based was approved by SAC TC280 and will be released. 3. SAC TC280 accepted the project “Simulation of synchronizer by using SRV”. Draft text to be submitted by 03-2017. Discussions on a parallel ASTM test method. 4. A procedure for “Wear Volume” is under development for SAC TC280. T2 - Working Group Meeting about SRV in China 2016 CY - Beijing, China DA - 05.04.2016 KW - SRV KW - Standards KW - China PY - 2016 AN - OPUS4-35745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Recent work of the global SRV working group and the development trend of SRV standards N2 - „Cliff“-testing by using SRV The identification in engine or gear tests of the induction time or off-set point („cliff“), after which wear and friction increased. “Cliff” testing as auxiliary method supports the interpretation of engine tests, as it enhances the values of expensive engine tests, because it enables correlations between friction & wear, either from engine or in SRV tests, with additive depletion, oxidation, viscometrics and dispersancy/detergency. Oil samples taken in discrete intervals and “Cliff” tested monitors the evolution of tribological and functional properties versus engine running time. “Cliff” testing by using SRV is a purposeful tool in order to secure and accelerate metallurgical developments and the development of lubricant formulations. T2 - Working Group Meeting about SRV in China 2016 CY - Beijing, China DA - 05.04.2016 KW - SRV KW - Standards KW - China PY - 2016 AN - OPUS4-35747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Otremba, Frank T1 - Hazmat tanks under extreme loading condition N2 - Gefahrguttanks werden primär gegen betriebliche Belastungen dimensioniert. Unfallbelastungen spielen hierbei keine Rolle. In der Vergangenheit gab es immer wieder einige katastrophale Unfälle, die nicht nur materielle Schäden zur Folge hatten sondern bei denen auch Todesopfer zu beklagen waren. Zur Ermittlung möglicher Sicherheitsreserven werden Untersuchungen zum Abtrag auslegungsüberschreitender Belastungen durchgeführt. Mit dem Grenzlasttragverfahren steht ein leistungsfähiges Analysewerkzeug zur Verfügung, mit dem nichtlineare Beanspruchungsszenarien bewertet werden können. Der Vergleich der numerischen mit den experimentellen Ergebnissen zeigt dies eindeutig. T2 - Gefahrgutkolloquium CY - Quetètaro, Mexico DA - 14.03.2016 KW - Hazmat tanks PY - 2016 AN - OPUS4-35651 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wille, Frank T1 - Aktuelles zur Weiterentwicklung der IAEA Transportempfehlungen N2 - Die IAEA Transportempfehlungen stellen die Basis der sicherheitstechnischen Anforderungen von Behältern zum Transport radioaktiver Stoffe dar. Sie gelten als international harmonsiert und werden regelmäßig an den Stand von Wissenschaft und Technik angepasst. Der laufende Revisionsprozess berücksichtigt mehr als 150 Vorschläge zur Weiterentwicklung des Regelwerks. Wesentliche Themen, die für die hoheitlichen Prüfungen im Zuständigkeitsbereich der BAM eine Rolle spielen, werden im Vortrag vorgestellt. Das Implementieren der besonderen sicherheitstechnischen Anforderungen an Zwischenlagerbehälter werden im Detail behandelt. Ebenfalls von Interesse ist die Weiterenticklung der Anforderungen, die den Einfluss des radioaktiven Inventars auf das Verschlusssystem bei Fallprüfungen diskutiert. T2 - 5. RAM-Behältersicherheitstage CY - Berlin, Deutschland DA - 16.03.2016 KW - IAEA KW - Transportbehälter KW - Sicherheitstechnische Auslegung KW - Dual purpose casks KW - Fallprüfungen PY - 2016 AN - OPUS4-35655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander T1 - Erfahrungen mit der eindeutigen Kennzeichnung - Lesbarkeit und Inhalte von Datamatrix-Codes N2 - Mit der Richtlinie 2008/43 wurde europaweit ein System zur Rückverfolgung von Explosivstoffen von Herstellung bis zum Verbrauch geschaffen. Dabei erhält jeder Zünder und jede Sprengstoffpatrone eine eindeutige Kennung, die üblicherweise als Datamatrix-Code aufgebracht wird. Seit 2015 muss das System angewandt werden. Trotz einer reichlichen Übergangsfrist gibt es immernoch Probleme im Detail, die sich vor allem auf die IT-mäßige Verarbeitbarkeit beziehen. T2 - 38. Informationstagung Sprengtechnik CY - Siegen DA - 01.04.2016 KW - Explosivstoffe KW - Rückverfolgbarkeit KW - Richtlinie 2008/43 PY - 2016 AN - OPUS4-35658 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisermann, René T1 - Verteilte faseroptische Sensorik für die akustische Detektion von Teilentladungen N2 - Eingeladener Seminarvortrag an der Technischen Universität Berlin über neuste wissenschaftliche Ergebnisse der Detektion von Teilentladungen an Kabelmuffen mittels verteilter akustischer Sensorik. T2 - Seminarvortrag bei der Veranstaltung "Hochspannungstechnik/ Energieübertragung" CY - Berlin, Deutschland DA - 11.11.2015 KW - 8.6 KW - Fasersensorik KW - Verteilte akustische Sensorik KW - Teilentladungs Überwachung PY - 2015 AN - OPUS4-35699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohn, Holger T1 - The VDI guideline series 4800 resource efficiency: an approach for increasing resource efficiency with the aim of conservation of natural resources in the industrial sector N2 - In 2011, the German Association of Engineers (VDI) started working on a set of guidelines towards increased resource efficiency. These guidelines represent a framework that defines resource efficiency and outlines considerations for the producing industry. A special guideline for SMEs is included as well as guidelines on methodologies for evaluating resource use indicators, such as the cumulative raw material demand of products and production systems. Resource efficiency, defined here as the ratio of specific quantifiable use to natural resource consumption, can be evaluated by defining a function which expresses the specific use and quantifies the resource requirements through a set of indicators (use of raw materials, energy, water, land and ecosystem services including sinks). The results from this also depend on the system boundary parameters and the allocation rules for by-products and waste treatment options. Optimising resource use is possible at all stages of a product’s or production system’s life cycle chain (raw material extraction, production and manufacturing, use and consumption, and the end-of-life stage). VDI guidelines are widely accepted across Germany’s industrial sector and therefore represent an important means of mainstreaming resource efficiency in this target area. As well as providing a methodological framework, the guidelines describe strategies and measures towards increasing resource efficiency, and they enable industrial producers and service providers to identify potential areas of improvement. The full article presents an overview of the methodology and contents of these guidelines and discusses their impact in achieving absolute reductions in the industrial use of natural resources. T2 - World Resources Forum 2015 CY - Davos, Switzerland DA - 11.10.2015 KW - Resource Efficiency KW - Life cycle thinking KW - Products and production systems KW - Standardization PY - 2015 AN - OPUS4-35674 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steinborn, Gabriele T1 - Stable aqeous niobium carbide suspensions for production of homogeneous hard materials N2 - Hard materials consist of a hard phase embedded in a metallic binder. In order to achieve high toughness and strength, it is necessary to have a perfect mixing of hard phase and binder, which is mainly achieved by ball milling. Niobium carbide (NbC) has a high potential to substitute tungsten carbide as hard material. The publication presents the development of stable homogeneous and de-agglomerated NbC-dispersions. To prevent agglomeration of the powder, stable suspensions were achieved by surface treatments with the dispersants (PD and HD), which resulted in a charge reversal from a negative to a positive zeta potential. This surface-modified powder guaranteed a stable re-dispersion in the binder suspension. Nickel powder was added as metallic binder. This suspension was suited for 3D-printing. The green samples could be sintered in vacuum or Argon atmosphere. T2 - 91. Jahrestagung der deutschen keramischen Gesellschaft CY - Freiberg, Germany DA - 07.03.2016 KW - Niobium carbide powder KW - Stable suspensions KW - Reduction of agglomerates PY - 2016 AN - OPUS4-35636 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktueller Stand der Normung N2 - Normung, Normen zur Konformitätsbewertung ISO 9001:2015 - Auswirkung auf die ISO CASCO Toolbox Revision der ISO/IEC 17011 T2 - FB 6 Sitzung CY - Berlin, Germany DA - 11.02.2016 KW - Normung PY - 2015 AN - OPUS4-35638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - Tailoring the functional properties of niobium carbide N2 - Several phases, like Nb₄C₃, Nb₆C₅ and other short and long range ordered phases occur in the region of homogeneity of NbCₓ (0,75≤ x ≤1.0) in the binary phase diagram. Properties, like micro-hardness, hot hardness, sliding wear resistance, elastic modulus and toughness can be tailored by the C/Nb ratio, the addition of secondary carbides and the type of binder. Supporting results from different grades with varying C/Nb ratio or binder types were illuminated. Thus, the NbC system offers to producers a wider process window, than WC. The impact of These tailored properties on sliding wear and cutting performance was illuminated by tribological and machining results. Niobium is today largely available. NbC can be synthesized by carbothermal conversion of Nb₂O₅ or be metallurgically grown and leached out, provides comparably low friction in many relevant tribo-contacts and displays low wear. NbC and Nb₂O₅ have so far no REACH classification related to human toxicology and are not listed as substances of very high concern contrary to WO₃ and Co₃O₄. T2 - 40th International Conference and Exposition on Advanced Ceramics and Composites CY - Daytona Beach, FL, USA DA - 24.01.2016 KW - Niobium carbide KW - Hard metal KW - Wear KW - Friction KW - Machining KW - Cutting KW - Metal matrix composite PY - 2016 SP - Paper: 2347292, 1 EP - 13 AN - OPUS4-35640 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wu, Cheng-Chieh T1 - Inverse finite element adjustment of material parameters from integrated analysis of displacement field measurement N2 - The integration of finite element method (FEM) into the least-squares adjustment presented in is further extended for a joint evaluation of an elastostatic model and displacement field measurement. For linear solids which obey the Hooke's law, the material parameters determination from measurements is being examined. T2 - 32nd Danubia-Adria Symposium on advances in experimental mechanics CY - Starý Smokovec, Slovakia DA - 22.09.2016 KW - Integrated analysis KW - Inverse problem KW - Finite element method KW - Least-squares adjustment KW - Model and measurement based analysis PY - 2015 AN - OPUS4-35648 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die neue Technologie-Roadmap "Prozess-Sensoren 4.0" - Chancen für neue Automationskonzepte N2 - Vorstellung der neuen Technologie-Roadmap "Prozess-Sensoren 4.0" T2 - Sitzung des AMA-Wissenschaftsrates CY - Saarbrücken, Germany DA - 16.03.2016 KW - Roadmap KW - Prozess-Sensoren 4.0 KW - Sensoren KW - Industrie 4.0 PY - 2016 AN - OPUS4-35716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bierstedt, Andreas T1 - Development of a laser induced plasma ion source coupled to ambient mass spectrometry N2 - Only a few years after the invention of the laser, the concept of laser microprobe mass spectrometry (LMMS), a technique which employed intense laser radiation for ion generation, was introduced. In these early studies at excessive irradiation microplasma formation could be observed to be an effective channel for ion formation. However, this plasma generation in vacuum led to undesired distortions of the mass analyzers and, thus, was discarded as an analytical ion source. Under ambient conditions, the surrounding air effectively cools the plasma cloud, making the plasma more controllable. The resulting laser induced plasma is nowadays commonly used in laser induced breakdown spectroscopy (LIBS) applications as excitation source for optical emission spectroscopy experiments. However, little effort has been made to introduce a LIBS plasma as a promising ion source for ambient mass spectrometry. The main hindrance is the transient character of laser induced plasmas that typically only has a lifetime on the order of several microseconds. This drastically reduces the duty cycle of these plasma sources. After these microseconds, the generated ions recombinate to uncharged atoms and even newly bound molecules, making them inaccessible to mass-to-charge analyzers. The advent of high repetition lasers together with the ever growing knowledge about manipulation of charged species at atmospheric pressures allow overcoming these obstacles. This presentation will introduce an ionization scheme using a laser induced plasma as the primary ion source. We believe that this novel ionization strategy will pave the way for future applications in ambient mass spectrometry. T2 - 5. Berliner Chemie Symposium CY - Berlin, Germany DA - 12.04.2016 KW - Laser induced plasma KW - Time-of-flight mass spectrometry KW - Ambient mass spectrometry KW - Ionization KW - Laser induziertes Plasma KW - Flugzeitmassenspektrometer KW - Atmosphärendruckmassenspektrometrie KW - Ionisierung PY - 2016 AN - OPUS4-35732 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschaikner, Martin T1 - Laminographic inspection of large fibre composite structures at the production site N2 - Short describtion of the technology and results of laminography. T2 - 7th International Symposium on NDT in Aerospace CY - Bremen, Germany DA - 16.11.2015 KW - Laminography KW - 3D Reconstruction KW - Inspection of CFRP KW - Laminografie KW - 3D Rekonstruktion KW - Untersuchung von CFK PY - 2015 AN - OPUS4-35610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Research activities at BAM related to extended spent fuel and HLW storage N2 - This presentation starts with a brief overview about the current situation of spent nuclear fuel and high level waste storage in Germany followed by a discussion of the expected timeline towards final disposal. Furthermore an overview is presented about research programmes for radioactive waste disposal and also extended interim storage issues due to the delay of the national repository siting procedure. In the second part of the presentation BAM research activities related to extended interim storage are addressed. This includes the status and preliminary results of proactive R&D projects concerning metal seals, degradation effects of polymers used as neutron shielding materials and finally elastomer seals. T2 - RIC 2016 - 28th Annual regulatory information conference CY - North Bethesda, Maryland, USA DA - 08.03.2016 KW - Spent Fuel KW - Extended interim storage KW - Radioactive waste KW - Degradation effects PY - 2016 UR - https://ric.nrc-gateway.gov/docs/abstracts/volzkeh-w22-hv.pdf AN - OPUS4-35614 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger T1 - Safety demonstrations with regard to extended interim storage N2 - This presentation addresses safety aspects concerning dual purpose casks for transportation and storage of spent fuel and high level radioactive waste. The long term performance of casks and their safety relevant components like sealed lid systems and the long term performance of cask internals, especially spent fuel assemblies are discussed. Transportation after interim storage is another key issue and due to the fact of delayed disposal projects current interim storage periods need to be extended causing additional safety demonstration needs for longer periods of time. Regarding this situation present BAM research activities in this area and their preliminary outcomes are presented. T2 - 5. RAM-Behältersicherheitstage CY - Berlin DA - 16.03.2016 KW - Interim storage KW - Radioactive waste KW - Spent fuel KW - Safety PY - 2016 AN - OPUS4-35615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Progress in using geophysical methods for foundation quality assurance and inspection N2 - Modern geophysical methods might be either directly applied to foundations or integrated into existing testing schemes to assist in quality assurance and inspections. This paper gives an overview on available ideas and some more detailed examples from the author `s work including: - Vibrator technologies to improve pile integrity testing. - Ideas from vertical seismic profiling used in multichannel pile inspection - Cross- and downhole seismics to check the diameter of jet grouting columns - Improving the parallel seismic methods for precise length measurement of piles and foundation walls  Seismic migration methods to improve ultrasonic imaging of foundation slabs  Seismological tools to monitor subtle changes in concrete constructions The author strongly believes that the cooperation between geophysics and civil engineering, which is obviously becoming stronger and stronger, will lead to a large number of innovative approaches for investigations tasks currently still unresolved. A lot of challenges and chances for science and technology are right here. T2 - SAGEEP 2016 CY - Denver, CO, USA DA - 20.03.2016 KW - Non-destructive testing KW - Piles, foundations KW - Slabs KW - Parallel seismic KW - Vibrator KW - Integrity PY - 2016 AN - OPUS4-35706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst T1 - Innovative seismic and resistivity tools for determining the diameter of jet grouting columns N2 - Jet grouting is used for soil improvement, foundation support and groundwater low control all over the world. It is well accepted and subject of standardization in many countries. However, some issues with the method remain. As the grout columns are produced in the subsurface without visual control in an often inhomogeneous soil, the prediction of the column’s diameter is still a challenge. All methods applied so far have their limitations. The approach presented in this study is twofold. At Colorado School of Mines a resistivity probe has been developed, which is pushed into the fresh grout directly after production. ERT sections are measured and inverted. Given some background information is available, the diameter of the columns can be evaluated. At BAM the focus has been on post-production investigations using seismic borehole methods. After hardening of the concrete seismic waves are sent through the column downhole (sensors placed in a casing in the column’s axis, source on top) and crosshole (source and sensor in boreholes on opposite sides of the column). We have developed a scheme to evaluate the diameter of the column based on travel time measurements without calibration. As this method is eventually more time and cost intensive we assume its application mainly for test columns. These are casted and dug out for visual inspection to determine appropriate grouting parameters. Our method would replace the often very cost intensive visual inspection. Both approaches have been tested at three test columns produced at BAM’s test site at Horstwalde, Germany and on an actual constructions site. Both methods have been in good agreement with the diameters predicted by the jet grouting contractors, which were confirmed in one case by mechanical measurements. T2 - SAGEEP 2016 CY - Denver, CO, USA DA - 20.03.2016 KW - Jet grouting KW - Diameter KW - Quality assurance KW - Seismic PY - 2016 AN - OPUS4-35708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die neue Technologie-Roadmap „Prozess-Sensoren 4.0“ – Chancen für neue Automationskonzepte N2 - Derzeit finden gravierende Veränderungen im Umfeld der Informations- und Kommunikationstechnik statt, die eine große Chance für die optimierte Prozessführung und Wertschöpfung mit darauf abgestimmten vernetzt kommunizierenden Sensoren bieten. Diese Art „smarte“ Sensoren stellen Dienste innerhalb eines Netzwerks bereit und nutzen Informationen daraus. Dieses ist die Voraussetzung für die Realisierung von Cyber Physical Systems (CPS) innerhalb zukünftiger Automatisierungskonzepte für die Prozessindustrie, wie sie auch durch das Zukunftsprojekt „Industrie 4.0“ adressiert werden. Initiiert von NAMUR und VDI/GMA und unter Mitwirkung der Unternehmen ABB, BASF, BTS, Bilfinger Maintenance, Endress+Hauser, Evonik, Festo, Krohne, Lanxess, Siemens, des Fraunhofer ICT, der HS Reutlingen und der BAM (Projektleitung) entstand jetzt die grundlegend aktualisierte und überarbeitete Technologie-Roadmap „Prozess-Sensoren 4.0“, die am 06. November 2015 auf der NAMUR-Hauptsitzung in Bad Neuenahr wurde. T2 - Sitzung des fms/ProcessNet-Gemeinschafts-Ausschusses „Sensoren und Sensorsysteme“ CY - Frankfurt am Main, Germany DA - 28.01.2016 KW - Roadmap KW - Prozess-Sensoren 4.0 KW - Sensoren KW - Industrie 4.0 PY - 2016 AN - OPUS4-35715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Werner, Jan A1 - Heming, Frank A1 - Jochems, Frank T1 - Impact of biocomponents in the fuel and heating oil on the compatibility of sealing materials N2 - The objective of this research was to determine the resistance of frequently used sealing materials such as FKM, FVMQ, VMQ, EPDM, CR, CSM, IIR, PA, NBR and PUR in fuels and heating oil with and without admixtures of biogenic sources such as E10, diesel fuel with 5 % biodiesel, non-aged and 2 year aged B10 (heating oil with 10 % biodiesel), pure diesel, standard heating oil and premium grade fuel Super plus at 20 °C, 40 °C and 70 °C. Mass, tensile strength and breaking elongation of the test specimens were determined before and after the exposure for 84 days in the fuels. The visual examination of some elastomer test specimens clearly showed the great volume increase until break or partial dissolution. Shore hardness A and D (for PA) were determined before and after exposure of the test specimens in the biofuels for 42 days. There is not determined a threshold for the reduction in tensile properties and Shore hardness in the international standards. Therefore a threshold of 15 % was determined for the evaluation of the compatibility. In summary, it can be therefore stated that the chemical resistance of the fluoropolymers FKM and FVMQ in fuels and biofuels is the best one. T2 - CORROSION 2016 CY - Vancouver, Kanada DA - 06.03.2016 KW - compatibility KW - sealing materials KW - biofuels PY - 2016 AN - OPUS4-35623 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Hoffmann, Gabi T1 - Schadensursachen an Rohrleitungen N2 - Das Gefährdungspotential von Rohrleitungen hängt primär von den Eigenschaften des durchfließenden Stoffes, den Betriebsbedingungen und den äußeren Beanspruchungen ab. Zu den Hauptschadensursachen an Rohrleitungen zählen Korrosion, Druckstöße und Kavitationsschläge, Zeitstandbeanspruchung, struktur- und fluidmechanische Schwingungen, Fremdberührungen, elektrische Fremdbeeinflussung und geologische Besonderheiten im Bereich des Rohrleitungsverlaufes. T2 - Workshop:Anwendung der verteilten akustischen und faseroptischen Sensorik zur kontinuierlichen Überwachung von Rohrleitungen CY - Berlin DA - 01.03.2016 KW - Korrosion KW - Zeitstandbeanspruchung KW - Struktur- und fluidmechanische Schwingungen KW - Elektrische Fremdbeeinflussung PY - 2016 AN - OPUS4-35624 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Bestimmung der Korrosionsbeständigkeit nichtrostender Stähle durch die Verarbeiter T2 - Praktikertagung im Metallhandwerk - Fachgerechte Auswahl und Verarbeitung von Edelstahl Rostfrei CY - Kaiserslautern, Germany DA - 2014-03-06 PY - 2014 AN - OPUS4-30319 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braun, Ulrike T1 - Molekulare Effekte von Alterungsreaktionen: Korrelation zu realen Proben T2 - Alterung von Polymerwerkstoffen und -bauteilen CY - Munich, Germany DA - 2014-02-26 PY - 2014 AN - OPUS4-30304 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe T1 - Multiple-sample Approach: Reliable Ranking and Validated Statistics of Bonding and Adhesive Strength T2 - EURADH 2014 CY - Alicante, Spain DA - 2014-04-22 PY - 2014 N1 - Geburtsname von Kittler-Packmor, Kai: Kittler, K. - Birth name of Kittler-Packmor, Kai: Kittler, K. AN - OPUS4-30305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dorgerloh, Ute T1 - Stabillisierung von Grundwasserproben zur Bestimmung organischer Inhaltsstoffe T2 - Altlastensymposium 2014 CY - Fulda, Germany DA - 2014-03-19 PY - 2014 AN - OPUS4-30286 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holm, Olaf T1 - Metal Recovery from Incineration Residues T2 - Advanced Recycling Technologies CY - Berlin, Germany DA - 2014-01-22 PY - 2014 AN - OPUS4-30326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver T1 - Klärschlammaschen - Potential zur Rohstoffrückgewinnung T2 - Diskussionsrunde Phosphorhaltige Klärschlammaschen CY - Frankfurt am Main, Germany DA - 2014-02-19 PY - 2014 AN - OPUS4-30328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver T1 - Phosphorrückgewinnung aus Klärschlammaschen T2 - Diskurs zum Eckpunktepapier "Beendigung der landwirtschaftlichen Klärschlammverwertung in Niedersachsen" CY - Hanover, Germany DA - 2014-03-13 PY - 2014 AN - OPUS4-30329 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Selleng, Christian T1 - Thermale Nachbehandlung von faserbewehrtem UHPC T2 - Workshop der DMG.Sektionen AMITU und CPKM CY - Bad Windsheim, Germany DA - 2014-02-26 PY - 2014 AN - OPUS4-30334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meinel, Dietmar T1 - Computertomographie T2 - Arbeitskolloquium zum Projekt Römische Großbronzen am UNESCO Welterbe Limes CY - Bonn, Germany DA - 2014-04-11 PY - 2014 AN - OPUS4-30335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheidemann, Robert T1 - Model-Sized and Full-Scale Dynamic Penetration Tests on Damping Concrete T2 - 17th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2013 CY - San Francisco, CA, USA DA - 2013-08-18 PY - 2013 AN - OPUS4-30276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Musolff, André T1 - Experimental Investigation of RAM Packages Impact Limiters T2 - Waste Management Conference 2014 (WM2014) CY - Phoenix, AZ, USA DA - 2014-03-02 PY - 2014 AN - OPUS4-30277 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Auster, Jürgen T1 - Leakage Testing During Lateral Displacement of Metallic Seals Under Mechanical Accident Impact T2 - 17th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2013) CY - San Francisco, CA, USA DA - 18.08.2013 PY - 2013 AN - OPUS4-30278 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Stephan T1 - Hapten design for the production of monoclonal antibodies against Diclofenac T2 - 8. Interdisziplinäres Doktorandenseminar der GDCh CY - Berlin, Germany DA - 2014-02-23 PY - 2014 AN - OPUS4-30280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schallschmidt, Kristin T1 - Versuch zur olfaktorischen Diskriminierung der Lungenkrebszelllinie A549 durch Honigbienen T2 - 8. Interdisziplinäres Doktorandenseminar CY - Berlin, Germany DA - 2014-02-23 PY - 2014 AN - OPUS4-30285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seuthe, T. T1 - Femtosecond-laser induced structural changes of silicate glasses investigated by µ-Raman spectroscopy T2 - 1st Joint Meeting of the German Society of Glass Technology (DGG) and the Glass & Optical Materials Division Annual Meeting (ACerS GOMD) CY - Aachen, Germany DA - 2014-05-25 PY - 2014 AN - OPUS4-30306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Staude, Andreas T1 - Making Use of Phase-Contrast in Dimensional uCT-measurements of Weakly Absorbing Objects T2 - Conference on Industrial Computed Tomography (ICT) CY - Wels, Austria DA - 2014-02-25 PY - 2014 AN - OPUS4-30307 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mermillod-Blondin, A. T1 - Quantitative estimate of laser-induced refractive index changes in the bulk of various transparent materials T2 - SPIE Photonics Europe, Optical Micro- and Nanometrology conference CY - Brussels, Belgium DA - 2014-04-15 PY - 2014 AN - OPUS4-30308 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meinel, Dietmar T1 - Examination of Damage Processes in Concrete with CT T2 - Conference on Industrial Computed Tomography (ICT) CY - Wels, Austria DA - 2014-02-25 PY - 2014 AN - OPUS4-30310 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Saalfrank, P. T1 - Theoretical NEXAFS investigation of structural defects in graphene: A density functional theory study T2 - Scattering of Atoms and Molecules from Surfaces - SAMS-2 CY - Potsdam, Germany DA - 2013-11-04 PY - 2013 AN - OPUS4-30311 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas T1 - Hochempfindliche Detektion von Gasen mittels SPR-Sensoren mit ellipsometrischen Messprinzip T2 - EFDS-Workshop "Analyse von Spurenverunreinigungen auf Oberflächen und in Gasen" CY - Dresden, Germany DA - 2013-12-02 PY - 2013 AN - OPUS4-30312 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas T1 - Accurate determination of film thickness and optical constants with ellipsometry T2 - Congrès International de Métrologie CY - Paris, France DA - 2013-10-07 PY - 2013 AN - OPUS4-30313 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas T1 - Vergleichbarkeit, Zuverlässigkeit und Genauigkeit der Bestimmung von Schichtdicken und optischen Konstanten mit Ellipsometrie an nicht-idealen Proben T2 - Seminar Messunsicherheit, PTB Berlin CY - Berlin, Germany DA - 2013-03-20 PY - 2013 AN - OPUS4-30314 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Woydt, Mathias T1 - The use of niobium carbide (NBC) as cutting tools and for wear resistant tribosystems T2 - 10. Int. Conf. on the Science of Hard Materials CY - Cancún, Mexico DA - 2014-03-10 PY - 2014 AN - OPUS4-30336 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Marotzke, Christian T1 - Limits in the determination of mechanical properties of composites by off-axis tests T2 - European SAMPE Conference CY - Paris, France DA - 2014-03-10 PY - 2014 AN - OPUS4-30337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Höhne, Robert T1 - A multiplex microarray for environmental analysis T2 - Advances in Microarrays CY - Berlin, Germany DA - 2014-03-10 PY - 2014 AN - OPUS4-30339 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Höhne, Robert T1 - Parallel analysis of micropollutants in water samples T2 - 8. Interdisziplinäres Doktorandenseminar CY - Berlin, Germany DA - 2014-02-23 PY - 2014 AN - OPUS4-30340 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bierkandt, Frank T1 - Quantitative Analyse der Silbernanopartikelaufnahme durch Zellen mittels LA-ICP-MS T2 - Anwendertreffen Plasmaspektrometrie 2014 CY - Hamburg, Germany DA - 2014-02-11 PY - 2014 AN - OPUS4-30363 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, R. T1 - Substrate screening with MeCAT - A comparison of strategies for relative protein quantification T2 - DGMS 2014 CY - Frankfurt am Main, Germany DA - 2014-03-02 PY - 2014 AN - OPUS4-30364 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Mechanischer Explosionsschutz - mechanisch erzeugte Funken als Zündquelle T2 - Ausbildung zum Explosionsschutzbeauftragten (Veranst.-Nr.: H050-02-332-4) CY - Hamburg, Germany DA - 2014-02-18 PY - 2014 AN - OPUS4-30352 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunewald, Thomas T1 - Mechanischer Explosionsschutz - mechanisch erzeugte Funken als Zündquelle T2 - Ausbildung zum Explosionsschutzbeauftragten (Veranst.-Nr.: H050-01-088-4) CY - Essen, Germany DA - 2014-01-21 PY - 2014 AN - OPUS4-30353 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grätz, Rainer T1 - Konformitätsbewertung mechanischer Ex-Betriebsmittel T2 - 39. Heilbronner Ex-Schutz-Seminar "Planen, Errichten und Betreiben von Anlagen in explosionsgefährdeten Betriebsstätten - Ex-Schutz mechanischer Geräte" CY - Heilbronn, Germany DA - 2014-02-19 PY - 2014 AN - OPUS4-30355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne T1 - Brand- und Explosionsgefahren von nanoskaligen Metallstäuben T2 - Jahrestreffen der ProcessNet-Fachgruppe "Agglomerations- und Schüttguttechnik" mit Beteiligung der Fachgemeinschaft "Anlagen- und Prozesssicherheit" CY - Magdeburg, Germany DA - 2014-03-10 PY - 2014 AN - OPUS4-30445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Wechselwirkende KW- und Peroxid-Poolfeuer T2 - Sitzung ProcessNet Arbeitsausschuss "Reaktionstechnik sicherheitstechnisch schwieriger Prozesse" CY - Darmstadt, Germany DA - 2014-03-11 PY - 2014 N1 - Geburtsname von Vela-Wallenschus, Iris: Vela, I. - Birth name of Vela-Wallenschus, Iris: Vela, I. AN - OPUS4-30447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wehrstedt, Klaus-Dieter T1 - Identifizierung gefährlicher exotherm zersetzlicher Stoffe T2 - DECHEMA-Weiterbildungskurs "Sicherheit chemischer Reaktionen" CY - Berlin, Germany DA - 2014-03-24 PY - 2014 AN - OPUS4-30448 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -