TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Ökodesign und Industrieprodukte - Tendenzen der Marktüberwachungsaktivitäten N2 - Sachstandbericht zu der Entwicklung gesetzlicher Auflagen zum in Verkehr bringen von Elektromotoren und den entsprechenden Aktivitäten der Marktüberwachung. T2 - 14. Technischer Tag der VEM Gruppe CY - Wernigerode, Germany DA - 15.09.2015 KW - Marktüberwachung KW - Elektromotoren KW - Industriegüter PY - 2015 AN - OPUS4-35532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Siebler, Daniel T1 - A new generation of all-elastomeric fluorescent POF for sensor applications N2 - We present fundamentals for the selection of fluorescent dyes and show the challenges of the implementation of fluorescent dyes in silicone rubber materials for the production of fluorescent all-silicone rubber POF. T2 - 24th International Conference on Plastic Optical Fibers (POF 2015) CY - Nuremberg, Germany DA - 22.09.2015 KW - Sensor application KW - Elastomeric polymer optical fiber KW - Covalently bonded fluorescent KW - Dye KW - Silicone rubber PY - 2015 AN - OPUS4-34327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisermann, René T1 - Verteilte faseroptische Sensorik für die akustische Detektion von Teilentladungen N2 - Eingeladener Seminarvortrag an der Technischen Universität Berlin über neuste wissenschaftliche Ergebnisse der Detektion von Teilentladungen an Kabelmuffen mittels verteilter akustischer Sensorik. T2 - Seminarvortrag bei der Veranstaltung "Hochspannungstechnik/ Energieübertragung" CY - Berlin, Deutschland DA - 11.11.2015 KW - 8.6 KW - Fasersensorik KW - Verteilte akustische Sensorik KW - Teilentladungs Überwachung PY - 2015 AN - OPUS4-35699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohn, Holger T1 - The VDI guideline series 4800 resource efficiency: an approach for increasing resource efficiency with the aim of conservation of natural resources in the industrial sector N2 - In 2011, the German Association of Engineers (VDI) started working on a set of guidelines towards increased resource efficiency. These guidelines represent a framework that defines resource efficiency and outlines considerations for the producing industry. A special guideline for SMEs is included as well as guidelines on methodologies for evaluating resource use indicators, such as the cumulative raw material demand of products and production systems. Resource efficiency, defined here as the ratio of specific quantifiable use to natural resource consumption, can be evaluated by defining a function which expresses the specific use and quantifies the resource requirements through a set of indicators (use of raw materials, energy, water, land and ecosystem services including sinks). The results from this also depend on the system boundary parameters and the allocation rules for by-products and waste treatment options. Optimising resource use is possible at all stages of a product’s or production system’s life cycle chain (raw material extraction, production and manufacturing, use and consumption, and the end-of-life stage). VDI guidelines are widely accepted across Germany’s industrial sector and therefore represent an important means of mainstreaming resource efficiency in this target area. As well as providing a methodological framework, the guidelines describe strategies and measures towards increasing resource efficiency, and they enable industrial producers and service providers to identify potential areas of improvement. The full article presents an overview of the methodology and contents of these guidelines and discusses their impact in achieving absolute reductions in the industrial use of natural resources. T2 - World Resources Forum 2015 CY - Davos, Switzerland DA - 11.10.2015 KW - Resource Efficiency KW - Life cycle thinking KW - Products and production systems KW - Standardization PY - 2015 AN - OPUS4-35674 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dudek, Gabriele T1 - Aktueller Stand der Normung N2 - Normung, Normen zur Konformitätsbewertung ISO 9001:2015 - Auswirkung auf die ISO CASCO Toolbox Revision der ISO/IEC 17011 T2 - FB 6 Sitzung CY - Berlin, Germany DA - 11.02.2016 KW - Normung PY - 2015 AN - OPUS4-35638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschaikner, Martin T1 - Laminographic inspection of large fibre composite structures at the production site N2 - Short describtion of the technology and results of laminography. T2 - 7th International Symposium on NDT in Aerospace CY - Bremen, Germany DA - 16.11.2015 KW - Laminography KW - 3D Reconstruction KW - Inspection of CFRP KW - Laminografie KW - 3D Rekonstruktion KW - Untersuchung von CFK PY - 2015 AN - OPUS4-35610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Claro, Maria T1 - Predictive methods for determining the decomposition properties of hazardous substances: from development to experimental verification N2 - SAF€RA ERANET – Coordination of European Research on Industrial Safety towards Smart and Sustainable Growth, in 2014 launched a joint call on “Innovating in safety and safe innovations”. The HAZPRED project “Predictive methods for determining the decomposition properties of hazardous substances: from development to experimental verification” was selected in this initiative. Main goal is the development and use of predictive methods to determine hazardous physico-chemical properties of various energetic materials (e.g. organic peroxides and self-reactive substances), e. g. thermal stability (self-accelerating decomposition temperature - SADT), explosive power (Trauzl test), heating under confinement (Koenen test), mechanical sensitiveness (impact or friction), etc. The project is based on a co-operation with INERIS (France), VSB-TUO (Czech Republic), BAM and chemical industry. T2 - SAF€RA-HAZPRED Meeting CY - Wuppertal, Germany DA - 16.12.2015 KW - SAF€RA KW - Hazardous substances KW - SADT PY - 2015 AN - OPUS4-36011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - qNMR-Referenzmaterialien und "Indirect Hard Modeling" (IHM) als Integrationsmethode N2 - Resolving overlapping peaks of multiple components. Relative primary analytical method - Fundamental relationship of qNMR. T2 - 4. Sitzung der Next-NMR-Arbeitsgruppe CY - Karlsruhe, Germany DA - 08.12.2015 KW - qNMR KW - Quantitative NMR-Spektroskopie KW - Indirect Hard Modeling (IHM) KW - Referenzmaterialien PY - 2015 AN - OPUS4-36138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Schmid, Thomas T1 - Möglichkeiten zur Sonderprobenanalytik - Gemeinsame Aktivitäten mit dem Salsa-Applikationslabor der Humboldt Universität zu Berlin N2 - Troubleshooting Samples Analytics: Impurities in products: unexpected & unwanted occurrence, unknown identity, analytical method unclear, often various analytical methods, necessary, short response time important (< 1 d), benefits: allocation of its source within hours safes cost • Investigations planned, coordinated and documented by TSA team • Variety of analytical methods available T2 - 3. Analytic-City-Forum Berlin Adlershof CY - Berlin, Germany DA - 08.10.2015 KW - Troubleshooting Samples Analytics KW - TSA KW - Sonderprobenanalytik KW - Salsa KW - Applikationslabor PY - 2015 AN - OPUS4-36139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - „NMR-METRONOMIE“ Die quantitative NMR-Spektroskopie (qNMR) gibt den Takt an N2 - qNMR is a pelative primary analytical method: Overview on fundamental relationships of qNMR T2 - Festkolloquium NMR-Spektroskopie (zum 25 jährigen Jubiläum der Firma Spectral Service, Köln) CY - Köln, Germany DA - 18.09.2015 KW - qNMR KW - Quantitative NMR-Spektroskopie KW - Metrologie PY - 2015 AN - OPUS4-36140 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Forschung und Entwicklung für Prozessanalytik und Automatisierung in der Prozessindustrie N2 - Neue Prozess-Sensoren für neue Produktionskonzepte. Wie entsteht Innovation? Forschungsimpulse aus der Technologie-Roadmap „Prozess-Sensoren 2015+“. Herausforderungen durch das Zukunftsprojekt „Industrie 4.0“. Technologie-Roadmap „Prozess-Sensoren 4.0“ T2 - ACHEMA 2015: Automation im Dialog – Meet the experts CY - Frankfurt a. M., Germany DA - 15.06.2015 KW - Industrie 4.0 KW - Smart Sensors KW - Smarte Sensoren KW - Process Analytical Technology KW - Prozessanalytik PY - 2015 AN - OPUS4-36142 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Quantitative and online NMR Spectroscopy at BAM N2 - Online NMR spectroscopy, Determination of impurities of fluids, NMR process Monitoring, purity assessment T2 - NMR-Kolloquium Buchs CY - Buchs, Switzerland DA - 29.05.2015 KW - qNMR KW - Quantitative NMR-Spektroskopie KW - Online NMR Spectroscopy KW - Reaction monitoring KW - Reference material KW - Metrology PY - 2015 AN - OPUS4-36143 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - qNMR forever – reference material metrology at high pressures and high purities N2 - Due to recent advances in technical developments of NMR instruments such as acquisition electronics and probe design, detection limits of components in liquid mixtures were improved into the lower ppm range (approx. 5–10 ppm amount of substance). This showed that modern NMR equipment is also suitable for the observation of hydrocarbon samples in the expanded fluid phase or gas phase. Since Quantitative NMR spectroscopy (qNMR) is a direct ratio method of analysis without the need of calibration it was used to determine impurities in appropriate liquid and liquefied hydrocarbon isomers up to C6, which are used for preparation of primary gas standards, e.g., natural gas or exhaust gas standards. At the same time it is possible to yield structural information with a minimum of sample preparation. Thus, cross contaminations between different isomers of the observed hydrocarbons and their (NMR-active) impurities can be identified and quantified. In general, most quantitative organic chemical measurements rely on the availability of highly purified compounds to act as calibration standards. The traceability and providence of these standards is an essential component of any measurement uncertainty budget and provides the final link of the result to the units of measurement, ideally the SI. The more recent increase in the use of qNMR for the direct assessment of chemical purity however can potentially improve the traceability and reduce the uncertainty of the measured chemical purity at a reduced cost and with less material. For example the method has beneficially been used by National Measurement institutes for recent CCQM comparisons including the CCQM–K55 series of purity studies. Traditional ‘indirect’ methods of purity analysis require that all impurities are identified and quantified, leading to a minimum of 4 individual analytical methods (organic impurities, water, solvents, inorganic residue). These multiple technique approaches measure an array of different chemical impurities normally present in purified organic chemical compounds. As many analytical methodologies have compound-specific response factors, the accuracy and traceability of the purity assessment is dependent on the availability of reference materials of the impurities being available. qNMR provides the most universally applicable form of direct purity determination without need for reference materials of impurities or the calculation of response factors but only exhibiting suitable NMR properties. The development of CRMs addressing qNMR specific measurement issues will give analysts compounds ideally suited for the analytical method and also provide full characterisation of qNMR related parameters to enable more realistic uncertainty budgets. These materials will give users the tools to exploit qNMR more easily and enable them to speed up analytical method development and reduce the time and financial burden of multiple analytical testing. T2 - 3rd Practical Application of NMR in Industry Conference (PANIC) 2015 CY - La Jolla, CA, USA DA - 09.02.2015 KW - qNMR KW - Quantitative NMR-Spektroskopie KW - Reference Material KW - Metrology PY - 2015 AN - OPUS4-36144 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Meyer, Klas A1 - Zientek, Nicolai T1 - Towards online reaction monitoring with fully automated NMR data evaluation and modelling - Current results from simultaneous 19F-1H medium resolution NMR experiments N2 - NMR Process Monitoring Towards an automated field integration T2 - 3rd Practical Applications of NMR in Industry Conference (PANIC) - Mestrelab users' meeting CY - La Jolla, CA, USA DA - 08.02.2015 KW - Online NMR spectroscopy KW - Reaction monitoring KW - Prozessanalytik KW - Process analytical technology PY - 2015 AN - OPUS4-36145 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Guthausen, G. T1 - Online measurements in a bypass: challenges and possibilities N2 - The design of sample flow cells, commonly used in online analytics and especially for medium resolution NMR spectroscopy (MR-NMR) in low magnetic fields, was experimentally and theoretically investigated by 1H-NMR and numerical simulations. The flow pattern was characterised to gain information about the residence time distribution and mixing effects. Both 1H-NMR imaging and spectroscopy were used to determine the characteristics of flow cells and their significance for on-line measurements such as reaction monitoring or hyphenated separation spectroscopy. The volume flow rates investigated were in the range from 0.1 to 10 ml/min, typically applied in the above mentioned applications. When compared to those commonly used in high-field NMR, the special characteristics of flow cells for MR-NMR were revealed by various NMR experiments and compared with CFD simulations. The influence of the design of the inlet and outlet on the flow pattern was investigated as well as the effect of the length of the cell. For practical use, a numerical estimation of the inflow length was given. In addition, it was shown how experiments on the polarisation build-up revealed insight into the flow characteristics in MR-NMR. T2 - Quantitative NMR Methods for Reaction and Process Monitoring (NMRPM) Symposium CY - Kaiserslautern, Germany DA - 15.01.2015 KW - Online NMR spectroscopy KW - Process analytical technology KW - Flow profiles KW - Online monitoring KW - Reaction monitoring PY - 2015 AN - OPUS4-36147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate T1 - Focusing of ferroelectret air-coupled ultrasound transducers N2 - Air-coupled ultrasound has been applied increasingly as a non-destructive testing method for lightweight construction in recent years. It is particularly appropriate for composite materials being used in automotive and aviation industry. Air-coupled ultrasound transducers mostly consist of piezoelectric materials and matching layers. However, their fabrication is challenging and their signal-to-noise ratio often not sufficient for many testing requirements. To enhance the efficiency, air-coupled ultrasound transducers made of cellular polypropylene have been developed. Because of its small density and sound velocity, this piezoelectric ferroelectret matches the small acoustic impedance of air much better than matching layers applied in conventional transducers. In our contribution, we present two different methods of spherical focusing of ferroelectret transducers for the further enhancement of their performance in NDT applications. Measurements on carbon-fiber-reinforced polymer (CFRP) samples and on metal adhesive joints performed with commercially available focused air-coupled ultrasound transducers are compared to measurements executed with self-developed focused ferroelectret transducers. T2 - 42nd Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Minneapolis, Minnesota, USA DA - 26.07.2015 KW - Focusing KW - Ferroelectret KW - Air-coupled KW - Transducer KW - Ultrasonic PY - 2015 AN - OPUS4-35957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Jörg T1 - Herausforderungen der Femtosekunden-Technologie an den Laserschutz N2 - Die Verleihung des Deutschen Zukunftspreises an ein Team zum Thema "Ultrakurzpulslaser für die industrielle Massenfertigung - Produzieren mit Lichtblitzen" im Jahr 2013 belegt die industrielle Relevanz des Ultrakurzpulslasereinsatzes in der Materialbearbeitung. Zunehmend werden weitere Anwendungen z.B. in der Mess- und Medizintechnik erschlossen. Femtosekunden-Laserpulse weisen prinzipbedingt ein breites Spektrum auf und besitzen bereits bei moderaten Pulsenergien extreme Pulsspitzenleistungen, womit über „konventionelle“ Laserquellen hinausgehende Herausforderungen an den Laserschutz entstehen. Die in entsprechenden Laserschutzbrillen verwendeten Laserschutzfilter müssen eine große spektrale Absorptionsbandbreite aufweisen und dürfen nicht aufschalten, d.h. keine induzierte Transmission zeigen. Im Vortrag soll dargestellt werden, dass Laserschutzfilter auf Glasbasis, die über ein breites Absorptionsspektrum verfügen, einen ausreichenden Schutz gegenüber fs-Laserstrahlung bieten, wohingegen Laserschutzfilter auf Polymerbasis eine induzierte spektrale Transmission bei steigender Energiedichte aufweisen können, was zu einem drastischen Verlust der Schutzfunktion führt. T2 - Symposium Strahlenschutz – Neue Technologien im Laserschutz CY - BIZBw, Mannheim, Germany DA - 17.11.2015 KW - Laserschutz KW - Schutzbrille KW - Ultrakurzpulslaser KW - Glasfilter KW - Polymerfilter PY - 2015 AN - OPUS4-36259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Akkerman, Floris T1 - Lampen und Leuchten unter der Ökodesign-und der EnVK-Richtlinie:Anforderungen und Marktüberwachung N2 - Vortrag zur Ökodesignrichtlinie und zur Energieverbrauchskennzeichnung auf einer Branchentagung mit Schwerpunkt Beleuchtungstechnik T2 - SGS Fachtag Lampen und Leuchten CY - Düsseldorf, Germany DA - 9.6.2015 KW - Ökodesign KW - Energieverbrauchskennzeichnung KW - Beleuchtung PY - 2015 AN - OPUS4-36263 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lenke, Karoline A1 - Trappe, Volker T1 - Short fibre polyamide under combined shear and tensile loading: A non-destructive evaluation of micro damage evolution N2 - The following paper focuses on the evolution of micro damage in short fibre reinforced polyamide. Therefore, tube samples are subjected to uni- and biaxial fatigue loadings. The evolution of micro damage is analysed by the non-destructive method of X-ray refraction analysis with consideration of the fibre orientation distribution. For validation of the applied micro damage models, fractographic analyses are performed. Concluding some general results, it has been observed that the load ratio influences the quantitative dominance of micro damage, whereas occurring damage phenomena depend on the type of loading (i.e. tension and torsion). Thus, zones in the Haigh-diagram are detected, where the occurrence of damage mechanisms qualitatively and quantitatively changes. This is a basis for further research regarding anisotropic damage criteria. T2 - International Conference on Composite Materials ICCM20 CY - Copenhagen, Denmark DA - 19.07.2015 PY - 2015 AN - OPUS4-33825 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Ronald T1 - Zuverlässigkeitsbasierte Bauwerksbewertung N2 - Die BAM erforscht mit Partnern an der TUM und DTU Methoden und Modelle für ein optimiertes Tragwerksmanagement von Infrastrukturbauwerken. Im Rahmen des vom BMVI und der BASt aufgelegten Projektclusters „Intelligente Brücke“ wurde ein Software-Prototyps zur zuverlässigkeitsbasierten Bewertung eines konkreten Spannbetonüberbaus unter Berücksichtigung von Inspektionen und Überwachungssystemen entwickelt. Der entwickelte Software-Prototyp ermöglicht Benutzern ohne vertiefte Kenntnisse der Zuverlässigkeitstheorie eine Berechnung des Einflusses von Bauwerksinformationen auf den Systemschädigungszustand und die Tragsicherheit. Auf dieser Grundlage können effiziente Inspektions- und Überwachungsmaßnahmen identifiziert und das Erhaltungsmanagement optimiert werden. T2 - BASt Symposium Intelligente Brücken - Der Weg in die Praxis CY - Bergisch Gladbach, Germany DA - 30.11.2015 KW - Intelligente Brücken KW - Brücken KW - Alterung KW - Bauwerksbewertung PY - 2015 AN - OPUS4-36537 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klingelhöffer, Hellmuth T1 - Aktuelles zur Mess- und Prüftechnik sowie zur Normung in der Ermüdungsprüfung N2 - Es wird der DIN-Arbeitsausschuss Ermüdungsprüfung und seine Aufgaben vorgestellt. Ferner wird über die Thematik der thermischen Drift von Extensometern und die daraus resultierenden Fehler berichtet. Darüber hinaus werden aktuelle Aspekte der dynamischen Temperaturmessung im thermo-mechanischen Ermüdungsversuch vorgestellt. T2 - Werkstofftechnisches Kolloquium Mess- und Kalibriertechnik, MPA Darmstadt CY - Darmstadt, Germany DA - 29.09.2015 KW - Ermüdungsprüfung KW - Thermomechanische Ermüdung KW - Thermische Drift von Extensometern KW - Dynamische Temperaturmessung PY - 2015 AN - OPUS4-38262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klingelhöffer, Hellmuth T1 - Investigations on the tensile testing procedure conducted within the European project TENSTAND N2 - The current presentation shows the intention of the former European TENSTAND project on computer controlled tensile testing of metals. The history of the tensile testing standards is explained. Some test results of the TENSTAND project are shown. The presentation is focused on criticism of Chinese delegates in ISO TC 164 SC1 WG4 who stated that the TENSTAND project which was finished about 10 years ago came to wrong conclusions and were misleading. This presentation points out misunderstandings of the Chinese delegation in the test program and the results of the TENSTAND project and the former development of the tensile testing standard ISO 6892-1. Some tests of the TENSTAND project were newly evaluated using the original test data. The evaluation showed again that the conclusions of the TENSTAND project are correct. T2 - Committee meeting of ISO TC 164 SC1 WG4 CY - Teddington, UK DA - 06.09.2015 KW - European TENSTAND project KW - ISO 6892-1 KW - Strain controlled tensile testing KW - Stress rate PY - 2015 AN - OPUS4-38227 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Linnemann, Konrad T1 - Aspects of spent fuel behavior assessment for transport packages N2 - Transport packages for spent nuclear fuel have to be assessed with respect to specific transport conditions. The physical state of the spent fuel and the fuel rod cladding as well as the geometric configuration of the fuel assemblies are important inputs for the evaluation of the package safety. The objective of this paper is to discuss the methodologies accepted by BAM for the authority assessment of spent fuel behavior within the package design approval procedure. T2 - SNL/BAM Workshop 2015 CY - Berlin, Germany DA - 29.10.2015 KW - Transport packages KW - Spent fuel assessment PY - 2015 AN - OPUS4-38103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Döring, Ingo T1 - Risiko Lithium-Ionen-Batterien - Beförderung nach dem ADR - Was ist bei Versand und Transport zu beachten N2 - Informationen zu den gefahrgutrechtlichen Vorschriften beim Verpacken, Versenden und Transportieren von Lithium-Ionen-Batterien T2 - 13. Gefahrgutstopp CY - Chemnitz, Germany DA - 03.12.2015 KW - Lithium-Ionen-Batterien KW - ADR PY - 2015 AN - OPUS4-36845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, David T1 - Properties and application areas of photon counting and energy resolving digital detector arrays N2 - Since a few years the direct detection of X-ray photons into electrical signals is allowed by usage of highly absorbing photo conducting materials (e.g. CdTe) as detection layer of an underlying CMOS semiconductor X-ray detector. NDT energies up to 400 keV are today also possible. The image sharpness and absorption efficiency is improved by the replacement of the unsharp scintillation layer (as used at indirect detectors) with a photo conducting layer of much higher thickness and a high voltage across it. If the read-out speed is high enough (ca. 50 – 100 ns dead time) single X-ray photons can be counted and their energy measured. Read-out noise and dark image correction can be avoided. By definition of energy thresholds selected energy ranges of the X-ray spectrum can be detected or also suppressed. This allows material discrimination by dual-energy technique or the reduction of image contributions from scattered radiation, which results in an enhanced contrast sensitivity. To use these advantages in an effective way, a special calibration procedure has to be developed, which considers also time dependent processes in the detection layer. This contribution presents some of these new properties of direct converting DDAs in comparison to the conventional indirect converting detectors for fiber composites and thick walled steel pipes (up to 35 mm wall thickness). Possible new application areas of NDT will be discussed for material discrimination especially within fiber reinforced composites (e.g. CFRC und GFRC). T2 - Digital Industrial Radiology and Computed Tomography CY - Ghent, Belgium DA - 22.06.2015 KW - Dual-energy KW - Photon counting KW - Multi-energy KW - Radiographic Testing (RT) KW - Direct detection PY - 2015 UR - http://www.ndt.net/events/DIR2015/app/content/Slides/92_Zscherpel.pdf N1 - Geburtsname von Schumacher, David: Walter, D. - Birth name of Schumacher, David: Walter, D. AN - OPUS4-36576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nolze, Gert T1 - Introduction to PowderCell N2 - The presentation give a short introduction into the free-available software PowderCell (BAM)for the simulation of X-ray diffraction patterns of polycrystalline materials. T2 - PowderCell Users meeting CY - Joinville, Brazil DA - 19.10.2015 KW - X-ray diffraction KW - Simulation KW - Structure viewer KW - Subgroup relationships PY - 2015 AN - OPUS4-37791 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nolze, Gert T1 - EBSD: more reliable and accurate N2 - The presentation discusses numerous new approaches in order to increase precision and accuracy of electrom backscatter diffraction measurements. T2 - 1st EBSD Workshop CY - Belo Horizonte, Brazil DA - 17.09.2015 KW - Orientation mapping KW - Electron backscatter diffraction KW - Lattice parameter determination KW - Orientation precision KW - Orientation noise PY - 2015 AN - OPUS4-37797 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nolze, Gert A1 - Winkelmann, Aimo T1 - The challenge of band detection N2 - The presentation demonstrates different traps which are related to the detection of Kikuchi bands in EBSD patterns. T2 - EBSD 2015 CY - Glasgow, UK DA - 30.03.2015 KW - Electron backscatter diffraction KW - Image processing KW - Pseudo symmerty KW - Crystal lattice KW - Pyrite KW - Pattern matching KW - Misindexing PY - 2015 AN - OPUS4-37805 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nolze, Gert T1 - SEM-TKD: Signal formation, practical challenges and related applications N2 - TKD and EBSD will be compared and benefits as well as limitations of TKD will be discussed. T2 - XIV Brazilian MRS Meeting CY - Rio de Janeiro, Brazil DA - 27.09.2015 KW - TKD KW - EBSD KW - Kikuchi diffraction KW - Nanoanalytic KW - Orientation mapping PY - 2015 AN - OPUS4-37788 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nolze, Gert T1 - Simulation of powder diffraction patterns N2 - The theory of powder diffraction simulation is explained at the example of PowderCell, a free-available software of BAM. T2 - PowderCell Users meeting CY - Joinville, Brazil DA - 21.09.2015 KW - Powder diffraction KW - X-ray diffraction KW - Phase analysis KW - Simulation PY - 2015 AN - OPUS4-37789 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lexow, Jürgen T1 - Forschen – Prüfen – Beraten – Ressortforschungseinrichtungen als Dienstleister für Politik und Gesellschaft N2 - Der Begriff Ressortforschung des Bundes wird definiert. An Beispielen verschiedener Ressortforschungseinrichtungen wird der Dienst für die Gesellschaft dargestellt. T2 - 47. Sitzung des MesseArbeitskreis Wissenschaft CY - Jena, Germany DA - 29.06.2015 KW - Ressortforschung KW - Deutsche Forschungslandschaft KW - Ressortforschungseinrichtungen PY - 2015 AN - OPUS4-38024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Huschke, Philip T1 - Concrete mesostructure geometry modeling with growing and colliding hard spheres N2 - Simulations of concrete on the mesoscale require complex geometry models that resolve single aggregates. Since they fill up to 60-80% of the virtual specimen, efficient algorithms for their placement are necessary. Event-driven molecular dynamics (EDMD) algorithms using growing spheres are proven to create dense polydisperse sphere packings. In this paper, a modified EDMD algorithm is presented and compared to the widely used random sequential addition algorithm. It reaches denser aggregate packings and saves computation time at high volume fractions. When meshing the geometry, a minimal distance between the aggregates ensures undistorted elements. It is obtained by increasing the aggregate size during the placement process, which makes the packing problem more challenging. For a given aggregate volume fraction, the presented algorithm maximizes this distance and meshable mesoscale geometries for concrete specimens with more than 70% aggregate content are produced. T2 - 3rd ECCOMAS Young Investigators Conference CY - Aachen, Germany DA - 20.07.2015 KW - Concrete KW - Mesoscale KW - Geometry modeling KW - Molecular dynamics PY - 2015 AN - OPUS4-38697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isleyen, A. T1 - Matrix reference materials for environmental analysis N2 - This project aims to develop capacity to produce certified reference materials (CRMs) for environmental analysis by transferring know-how between the partners and combining their skills to focus on environmental CRM production. The production process includes good manufacturing practices for processing materials, method development, the validation and application of homogeneity, stability and characterisation tests, the calculation of individual uncertainties (between-unit inhomogeneity, long term stability, characterisation) and combination of uncertainties to determine overall uncertainty of the matrix reference materials. An inter laboratory comparison registered as a EURAMET project is set as the ultimate project outcome, confirming the partners’ capabilities in applying newly acquired skills. T2 - 9th International Conference on Instrumental Methods of Analysis: Modern Trends and Applications CY - Kalamata, Greece DA - 20.09.2015 KW - Priority substances KW - Toxic metals KW - PFOS KW - PFA PY - 2015 AN - OPUS4-45252 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wienecke, Bernd-Uwe T1 - Bauartprüfungen für Verpackungen für defekte Lithiumbatterien N2 - Die Bauartprüfung und Auswahl der Verpackung/Großverpackung für die Beförderung von Lithiumbatterien. T2 - WORKSHOP TRANSPORT DEFEKTER LITHIUM-BATTERIEN CY - Berlin, Germany DA - 15.05.2018 KW - Bauartprüfung KW - Lithiumbatterie KW - Defekte Lithiumbatterie PY - 2015 AN - OPUS4-45058 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rockenhäuser, Christian T1 - Microstructural investigations of an Al-2618 alloy N2 - Results of Microstructural investigations of an Al-2618 alloy are summrised and discussed. T2 - FVV Arbeitskreissitzung CY - Berlin, Germany DA - 13.05.2015 KW - Aluminium alloy KW - Transmission electron microscopy KW - Microstructure KW - Degradation PY - 2015 AN - OPUS4-42197 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Jörg F. T1 - Numerical simulation of ultrasonic wave propagation using higher order methods in space and time N2 - The paper discusses the efficient simulation of ultrasonic wave propagation. It is demonstrated that a combination of higher methods in space and time leads to a significant performance boost. Higher order spectral elements are used for the spatial discretization. A comparison with standard finite elements shows the advantages when using explicit time integration schemes. For the temporal discretization, an efficient explicit fourth order Nyström method is presented. Its computational efficiency for wave propagation problems is compared to a second order Velocity Verlet integration. T2 - 1st Pan-American Congress on Computational Mechanics - PANACM 2015 CY - Buenos Aires, Argentina DA - 27.04.2015 KW - Elastic wave propagation KW - Spectral element method KW - Nyström methods PY - 2015 AN - OPUS4-38646 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Jörg F. T1 - Multiscale modeling of concrete - from mesoscale to macroscale N2 - Concrete is one of the most attractive building materials consumed by humans more than any other material, except water. The particular importance of concrete for a sustainable, energy-efficient economy is highlighted by the fact that about 5% of worldwide CO2 emissions are created from the cement industry. Concrete is a very complex material. Its properties are time dependent, which includes the solidification after casting or creep and shrinkage. In addition, concrete is a quasi-brittle material which requires to model the softening behavior including the challenge of appropriate regularization strategies. Many characteristic features are strongly related to its complex heterogeneous structure, including particles and mortar on the mesoscale or the CSH-phases on the micro scale. At first, a short introduction to the generation of mesoscale geometries as a three phase composite including particles, mortar matrix and the interfacial transition zone is given. Afterwards, the numerical model including meshing (XFEM and aligned meshes) as well as regularized material models for the mortar phase are presented. The focus of the presentation is the discussion of multiscale approaches to combine mesoscale models with realistic macroscale models. This includes a concurrent approach using an adaptive transition between mesoscale and macroscale models which are coupled using the mortar method. A second hierarchical approach is based on the concept of FE², which is extended to incorporate softening by solving a fine scale boundary value problem for each macroscopic integration point. T2 - COST Action TU 1404 – 2nd WORKSHOP CY - Wien, Austria DA - 19.09.2015 KW - Multiscale KW - Localization KW - Damage KW - FE² KW - Mesoscale PY - 2015 AN - OPUS4-38650 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias T1 - Evolution of crystallite size, lattice parameter and internal strain in Al precipitates during high energy ball milling of partly amorphous Al87Ni8La5 alloy T2 - 79. Jahrestagung der DPG und DPG-Frühjahrstagung CY - Berlin, Germany DA - 2015-03-15 PY - 2015 AN - OPUS4-32923 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schöne, Dieter T1 - Experimentelle Ermittlung des Schwellenwertes DKth mittels unterschiedlicher Methoden und für verschiedene Spannungsverhältnisse T2 - 47. Tagung des DVM-Arbeitskreises Bruchvorgänge und Bauteilsicherheit: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen CY - Freiberg, Germany DA - 2015-02-10 PY - 2015 AN - OPUS4-32833 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Isleyen, A. T1 - Matrix reference materials for environmental analysis N2 - Reliable analysis of chemical indicators in water, sediment and soil samples for the purpose of environmental pollution assessment poses one of the greatest analytical challenges, having in mind the complexity of sample matrix and low concentrations of pollutants. Organics (pesticides, PAHs, PCBs, etc.) and heavy metals (Hg, Cd, Ni, Pb and As) represent target parameters. Laboratories performing sampling and tests in this field regulated by respective EU directives [1], need strong support in terms of providing them with appropriate matrix CRMs enabling the process of quality control. NMIs and DIs with proven metrological capabilities for the production and certification of such materials are necessary for the provision of quality data. This project is aiming to develop capacity to produce CRMs for environmental analysis by transferring the theoretical and practical know-how between the partners and combining their skills to focus on environmental CRM production in accordance with ISO Guide 34 [2]. Production process includes good manufacturing practices for processing materials, method development and validation for homogeneity, stability and characterisation tests, characterisation of selected analytes together with additional information about matrix constituents, the calculation of individual uncertainties (between units inhomogeneity, long term stability, characterisation) and combination of uncertainties to determine overall uncertainty of the matrix reference materials. Inter laboratory comparison registered as EURAMET project is set as the ultimate project outcome, confirming the partners’ capabilities in applying newly acquired skills. T2 - 9th International Conference on Instrumental Methods of Analysis: Modern Trends and Applications CY - Kalamata, Greece DA - 20.09.2015 KW - PFOS KW - Environment KW - CRM KW - Soil KW - Heavy metal KW - PFOA PY - 2015 UR - http://www.ima2015.teikal.gr/images/IMA-2015_book_of_abstracts.pdf AN - OPUS4-38799 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dittrich, Matthias T1 - Präzisierung der Prüfanforderungen an Stahlblechcontainer für das Endlager Konrad N2 - Abfallgebinde, die im Endlager Konrad eingelagert werden sollen, müssen die Anforderungen und Kriterien erfüllen, die in den Endlagerungsbedingungen (SE-IB-29/08-Rev-1) und in der Produktkontrolle (SE-IB-30/08-Rev-1) festgelegt sind. Die Qualifizierung der Abfallbehälter erfolgt auf dieser Grundlage in Form von Bauartprüfungen, die von der Bundesanstalt für Materialforschung und -prüfung (BAM) im Auftrag des Bundesamtes für Strahlen-schutz (BfS) durchgeführt werden. Darüber hinaus sind die im Hinblick auf Behälterbauartprüfungen relevanten Nebenbestimmungen aus dem Planfeststellungsbeschluss für das Endlager Konrad zu berücksichtigen. Zur besseren Anwendbarkeit werden diese Nebenbestimmungen in die Endlagerungsbedingungen und die Pro-duktkontrolle eingearbeitet. Begleitend ist als Hilfestellung für die Abfallablieferer und Behälterhersteller ein Leit-faden geplant, der praktikable Nachweisstrategien aufzeigt und, soweit erforderlich, Hintergrundinformationen zu den Spezifikationen der Regelwerke liefert. Die BAM ist vom BfS beauftragt, hierfür Vorschläge zu entwickeln und Empfehlungen abzugeben. T2 - KONTEC 2015 - 12. Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle" CY - Dresden, Germany DA - 2015-03-25 KW - ISO 1496-1 KW - Endlager Konrad PY - 2015 AN - OPUS4-39869 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trela, Christiane T1 - Ground penetrating radar in reflection vs transmission mode for void detection in concrete structures N2 - The concreting of prefabricated concrete structures can lead to insufficient bonding or even to remaining cavities. Honeycombs (aggregate clusters without cement) represent potential weakening of the structure and need to be detected non-destructively. In our study we tested the capability of ground penetrating radar (GPR) techniques for this purpose. We applied GPR in reflection mode and zero-offset profiling (ZOP) transmission mode on a precast concrete twin wall with built-in honeycombs. GPR measurements were performed as two channel measurement with ground coupled antennas with centre frequencies of 1.5 GHz and 2.6 GHz mounted to an automated scanner system. Our findings show that ZOP transmission measurements are a more efficient method to detect voids in reinforced concrete structures compared to reflection mode measurements. This holds for both the effort needed for the measurement and the evaluation as well as the validity of the data. Honeycombs (basically representing voids) are usually characterized by strongly reduced amplitudes and earlier arrivals of the transmitted wave. T2 - International Symposium Non-Destructive Tesing in Civil Engineering (NDT-CE 2015) CY - Berlin, Germany DA - 15.09.2015 KW - Void detection KW - Ground penetrating radar KW - Reflection KW - Transmission KW - Reinforced concrete KW - Prefabricated wall PY - 2015 AN - OPUS4-40005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maack, Stefan T1 - Demonstration of State of the Art NDT-Methods for Nuclear Concrete Reactor Containments N2 - The special design of buildings, constructed for nuclear power plants is a particular challenge for the nondestructive testing in the building industry. In particular the major component thicknesses, the degree of reinforcement and surface coating systems make the application of NDT methods difficult. The studies first steps were undertaken to determine to which extent established applications of these techniques are useable in the field of infrastructure buildings. Methods have been evaluated that are already state of the art. So for example the ground penetrating radar was used for locating metallic mounting parts. Furthermore, the low-lying internal structure of the containment was investigated with the ultrasonic method. T2 - International Symposium Non-Destructive Testing in Civil Engineering 2015 CY - Berlin, Germany DA - 15.09.2015 KW - ground penetrating radar KW - ultrasonic KW - nuclear structures KW - NDT PY - 2015 AN - OPUS4-38839 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasparek, Eva T1 - Transport- und Lagerbehälter für radioaktive Stoffe - Kerntechnische Entsorgung - N2 - Impulsvortrag zum Stand der Forschung und zukünftigen Forschungsbedarf im Bereich von Transport- und Lagerbehältern für radioaktive Stoffe im Hinblick auf das Themenfeld Energie T2 - 1. Sitzung des wissenschaftlichen Beirats CY - Berlin, Germany DA - 01.12.2015 KW - Radioaktive Stoffe KW - Forschung KW - Transport- und Lagerbehälter PY - 2015 AN - OPUS4-38893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker T1 - Degradation mechanism of short-fibre reinforced polyamide due to unaxial fatigue loading evaluated by non-destructive testing and fractography N2 - The damage process of short glass fibre (30% weight) reinforced polyamide caused by mechanical loading was investigated from the beginning on micro cracking level to the incipient crack of mm-dimension. Based on high resolution computer tomography and the X-ray-refraction technique the inner surface due to micro-cracking at the short fibre ends and the fibre matrix debonding of the skin surface of the filament was determined quantitatively. With the knowledge of the fatigue crack propagation rate and fracture toughness of the material from former research projects, it was derived that the total inner surface due to micro cracks measured by X-ray refraction is much higher than the specimen could have withstand the load, supposed the surface is in a localized crack. Hence, the damage process could be described from micro to macro level. Accompanying fractographic investigations endorse the modelling based on the NDT-techniques. T2 - International Conference of Fatigue of Composites ICFC 6 CY - Paris, France DA - 25.03.2015 KW - Damage evolution KW - Fracture mechanics KW - Crack propagation KW - PA-GF30 KW - X-ray-refraction KW - Fractography PY - 2015 AN - OPUS4-38778 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trappe, Volker T1 - Fatigue life evaluation of spar cap materials by four point bending test on width-tapered specimens N2 - The presented research project focuses on an effective method to evaluate the fatigue strength of thick unidirectional laminates to be applied in spar caps. Therefore, a width-tapered bending specimen was developed for a four point loading set up. Static and fatigue loading was performed with the load ratio of R=-1. The complex stress state was investigated numerically with a finite element analysis. Finally, the concept was proven experimentally on specimens made of pultruded fibre rods. The fatigue behaviour of continuous tapered width by water jet cutting was compared to discrete tapering by rod-drop. T2 - 20th International Conference on Composite Materials CY - Copenhagen, Denmark DA - 19.07.2015 KW - Fatigue KW - CFRP KW - Pultruded fibre rods KW - Spar cap design PY - 2015 AN - OPUS4-38781 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klein, Ulrich T1 - Schäden von Verbindungen an Edelstahlrohren N2 - Spaltkorrosion und Spannungsrisskorrosion als Ursache für das Versagen von Rohrleitungen aus Edelstahl T2 - GfKorr Arbeitskreissitzung Schadensuntersuchung 2015 CY - Frankfurt a.M., Germany DA - 26.05.2015 KW - Pressverbindung KW - Spaltkorrosion KW - Spannungsrisskrorsion KW - Trinkwasserinstallation KW - Feuerlöschanlage PY - 2015 AN - OPUS4-37611 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hielscher, Stefan T1 - Haftfestigkeit optischer und ophthalmischer Schichten auf Polymeren und Glas T1 - Adhesive strength of optical coatings on glass and ophthalmic coatings on polymers N2 - Die quantitative Bestimmung der Haftfestigkeit von Beschichtungen ist von entscheidender Bedeutung sowohl für die Entwicklung als auch für die Qualitätssicherung. In einer Vergleichsstudie zur Haftfestigkeit von optischen und ophthalmischen Schichten wurde mit Hilfe der Zentrifugentechnologie der Einfluss verschiedener Parameter (Substratdicke, Oberflächenvorbehand-lung, Haftvermittler) auf die Haftfestigkeit optischer Schichten auf silikatischen und ophthalmischer Schichten auf polymeren Substraten untersucht. Zur Bestimmung der Haftfestigkeit in der physikalisch korrekten Dimension Kraft pro Fläche im Stirnabzug stehen die Ein-Proben-Prüfung mit der Zugprüfmaschine und die Mehr-Proben-Prüfung mittels Zentri- fugentechnologie zur Verfügung. Die Zentrifugentechnologie wurde ausgewählt, da die Prüfung von bis zu acht Proben unter nahezu identischen Versuchsbedingungen und somit eine statistisch gesicherte Bestimmung der Haftfestigkeit möglich sind. Es konnte nachgewiesen werden, dass die Substratdicke einen erheblichen Einfluss auf die gemessene Haftfestigkeit hat. Dies entspricht den Erwartungen, da es sich bei der Haftfestigkeit um eine System- eigenschaft des Schicht-Substrat-Systems handelt. Bei den Delaminationsbrüchen (DF) konnte zwischen Delamination des metallischen Reflektors (DF-R) und Delamination des Dielektrikums (DF-D) unter- schieden werden. Im Fall hinreichender Haftfestigkeit der Beschichtung traten auch Adhäsionsbrüche am Interface zum und Kohäsionsbrüche im Klebstoff auf. Nachfolgende Untersuchungen werden sich mit alternativen Klebstoffen und weiterentwickelten Fügestrategien befassen. N2 - The quantitative determination of adhesive strength of coatings is essential for both R&D and quality assurance. In a comparative study on adhesive strength of optical and ophthalmic coatings, centrifuge technology has been used for the investigation of the influence of certain parameters (e.g. substrate thickness, surface-pretreatment and adhesion promoters) on adhesive strength of optical coatings on silicate and ophthalmic coatings on polymer substrates. For determination of adhesive strength in the correct dimension force per area in the pull-off test, only two tests are available, the single-sample test in a tensile testing machine and the multi-sample test by means of centrifuge technology. The centrifuge technology has been chosen because up to eight samples can be tested under almost identical testing conditions at the same time. Hence, a statistical evaluation of adhesive strength is feasible. It has been shown that substrate thickness has a remarkable influence on the measured adhesive strength. This fulfils the expectations as adhesive strength is a system property of the coating-substrate system. Regarding delamination failure (DF) it could be differentiated between the delamination of reflective coatings (DF-R) and delamination of dielectric coatings (DF-D). In case of sufficient adhesive strength of the coating, adhesion failure at the interface of and cohesion failure within the adhesive were also observed. Following studies will address alternative adhesives and advanced bonding strategies. T2 - Werkstoffprüfung 2015 CY - Bad Neuenahr, Germany DA - 03.12.2015 KW - Haftfestigkeit KW - Optische Schichten KW - Ophthalmische Schichten KW - Zentrifugentechnologie KW - Mehr-Proben-Prüfung PY - 2015 AN - OPUS4-37022 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braun, Ulrike T1 - Thermal decomposition extraction technique for the identification of microplastic in environmentel samples T2 - PDDG 2015 (The Polymer Degradation Discussion Group) CY - Stockholm, Sweden DA - 30.08.2015 PY - 2015 AN - OPUS4-34066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Karsten T1 - Experimental Testing of Transport and Storage Containers N2 - The presentation gives an overview about mechanical and thermal testing of packages and containers for radioactive material in Germany. The test facilities of BAM and the main measurement methods are described followed by testing of containers (prototype, full-scale, reduced scale) as well as components and specimens. T2 - Workshop CNCAN – BAM on the exchange of testing and licensing work for transport packages CY - Berlin, Germany DA - 10.11.2015 KW - Drop test KW - Package KW - Thermal test KW - Impact KW - Leaktightness PY - 2015 AN - OPUS4-40932 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -