TY - JOUR A1 - Durlo Tambara, Luis Urbano A1 - Lima, G. T. S. A1 - Silvestro, L. A1 - Ruviaro, A. S. A1 - Gleize, P. J. P. A1 - de Azevedo, A. R. G. T1 - Influence of polycarboxylate superplasticizer and calcium sulfoaluminate cement on the rheology, hydration kinetics, and porosity of Portland cement pastes JF - Journal of Building Engineering N2 - Binary systems composed of Portland cement (PC) and calcium sulfoaluminate (CSA) cement have stood out for applications requiring high early strengths. Nevertheless, the application of these systems may be limited due to their properties in the fresh state, which requires a better understanding of the rheological behavior of these materials. Thus, this study evaluated the incorporation of different polycarboxylate-based superplasticizer (SP) contents (0.15, 0.20, and 0.25 wt%) on PC and PC-CSA binary cement pastes. Rotational rheometry, isothermal calorimetry, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption and desorption tests to assess the pore size distribution of cement pastes were conducted. While the SP incorporation reduced the dynamic yield stress of PC pastes, it progressively increased the yield stress of PC-CSA systems. The increase in SP content increased the main heat flow peak of PC-CSA pastes, although it did not significantly affect the cumulative heat after 160 h of hydration. FTIR and XRD confirm higher ettringite contents in the binary systems and indicate the presence of carboaluminates phases after 7 d of hydration in both PC and PC-CSA and hemicarboaluminate in PC-CSA pastes. The CSA incorporation reduced the cumulative pore volume by up to 32% compared to PC pastes, while the SP content evaluated did not significantly affect the porosity of PC-CSA pastes. KW - Calcium sulfoaluminate cement KW - Portland cement KW - Superplasticizer KW - Rheology KW - Hydration PY - 2023 DO - https://doi.org/10.1016/j.jobe.2023.106120 SN - 2352-7102 VL - 68 SP - 1 EP - 15 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-57034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - da Silva, T. R. A1 - Matos, P. R. de A1 - Durlo Tambara, Luis Urbano A1 - Marvila, M. T. A1 - de Azevedo, A. R. G. T1 - A review on the performance of açaí fiber in cementitious composites: Characteristics and application challenges JF - Journal of Building Engineering N2 - This paper aimed to perform an exploratory literature review, focusing on the aspects of hydration and rheological properties of cementitious composites with açaí fibers. The use of natural fibers as a reinforcement in cementitious matrices has been widely studied, and açaí fiber is a promising option due to its unique characteristics. However, there is still a lack of knowledge regarding the correlation between fiber parameters and the technological properties of composites, which limits the development of new applications, such as 3D printing. The review provided an overview of the main characteristics of açaí fibers and the parameters for their application in cementitious matrices. Alkali treatment with 5% NaOH solution for 1 h shows increased mechanical and physical properties in açaí fibers. Despite the potential advantages of these composites, they pose challenges due to the different fiber surface treatment and interfacial transitions and the processing conditions of the fibers. Although small addition of açaí fibers slightly decreases the cement hydration process, keeping the cross-compatibility index high (>95). To overcome these challenges, it is necessary to evaluate the rheological behavior of cementitious materials with açaí fibers, which has not been reported in the literature. By doing so, it will be possible to optimize the processing conditions and develop new applications, such as additive manufacturing, which has never been explored with açaí fibers. KW - Natural fibers KW - Açaí fiber KW - Portland cement KW - Alternative materials PY - 2023 DO - https://doi.org/10.1016/j.jobe.2023.106481 SN - 2352-7102 VL - 71 IS - 106481 SP - 1 EP - 21 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-57326 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -