TY - JOUR A1 - Lietze, Dieter A1 - Pinkofsky, Horst T1 - Einfluß des Durchmessers auf die Beanspruchung von Rohrleitungen bei detonativ verlaufenden Gasreaktionen N2 - Bei detonativ verlaufenden Reaktionen müssen mehrere Belastungsfälle unterschieden werden, bei denen es zu unterschiedlich hohen Beanspruchungen an den jeweils belasteten Bauteilen einer Rohrleitung kommt. Bei Untersuchungen der BAM zu diesem Fragenkomplex ist festgestellt worden, dass bei der Belastung, die beim Durchlaufen einer stabilen Detonation unter stationären Bedingungen an der Rohrwand auftritt, der bei der Druckmessung ermittelte maximale Explosionsdruck für die Bemessung der Rohrleitung bei diesem Belastungsfall herangezogen werden kann. Durch Druckmessungen bei stabilen Detonationen unter stationären Bedingungen in Rohrleitungen mit unterschiedlich großem Durchmesser wurde die Abhängigkeit des Detonationsdruckes vom Rohrdurchmesser näher untersucht. Auch auf den Belastungsfall der Reflexion einer stabilen Detonation bei stationären Bedingungen und auf die extremen Belastungsfälle beim Durchlaufen und bei der Reflexion einer instabilen Detonation bei extrem instationären Bedingungen, d.h. am Umschlagspunkt zur Detonation, wird eingegangen. KW - Rohrleitung KW - Durchmesser KW - Detonation KW - Gas PY - 1996 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 37 IS - 5 SP - 33 EP - 37 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-671 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brekow, Gerhard A1 - Erhard, Anton T1 - Untersuchungen mit TOFD an geschweißten Längsnahtproben N2 - Im Gegensatz zur Impuls-Echo-Technik, die im Wesentlichen auf der Anton Erhard, Berlin Reflexion am Fehler basiert, wird bei der Time-Of-Flight Diffraction Technique (TOFD-Technik) die Beugung der Schallwellen am Fehler zum Nachweis genutzt. Zwei Winkelprüfköpfe für Longitudinalwellen sind in V-Durchschallung angeordnet. Die Prüfköpfe befinden sich jeweils auf einer Seite der Schweißnaht und werden bei der Messung parallel zur Schweißnaht verschoben. Das ausgesandte Schallbündel trifft auf Fehlerränder, an denen gebeugte Wellenanteile entstehen, die je nach Entstehungsort mit unterschiedlichen Schalllaufzeiten empfangen, in hochfrequenten A-Bildern abgespeichert und für die Auswertung in B-Bildern dargestellt werden. Die Untersuchungen zeigen, dass die TOFD-Technik Beiträge zur Fehlergrößenabschätzung liefert, aber keinesfalls die Impuls-Echo- Technik mit nachgeschalteter Röntgenprüfung ersetzen kann. PY - 2000 SN - 0025-5300 VL - 42 IS - 11-12 SP - 437 EP - 443 PB - Carl Hanser Verlag CY - München AN - OPUS4-963 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartoll, Jens A1 - Nofz, Marianne A1 - Stößer, R. T1 - Generation and conversion of electronic defects in calcium carbonates by UV/Vis light N2 - Radical species like CO-2,CO-3, SO-2, and SO-3 can be created by exposing natural and synthetic calcium carbonates to sunlight or to the light of a Hg(Xe) lamp. This poses as a risk for ESR dating of these materials, because the radicals formed by light exposure cannot be distinguished from those generated by radioactivity. Furthermore, paramagnetic centers like SO-2, electrons trapped near Zn2+ or Cd2+ ions, surface defects, and radicals with g?=2.0040, can be bleached in ?-irradiated samples by light and show conversion effects. KW - ESR PY - 2000 DO - https://doi.org/10.1016/S0969-8043(00)00044-0 SN - 0883-2889 SN - 0969-8043 IS - 52 SP - 1099 EP - 1105 PB - Elsevier CY - Amsterdam AN - OPUS4-892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehrstedt, A. A1 - Ullner, Christian T1 - Erfolgreicher Abschluss der Normungsarbeit "Instrumentierte Eindringprüfung" - ISO 14577 ist veröffentlicht N2 - Im Oktober 2002 fand die Normungsarbeit zur „Instrumentierten Eindringprüfung“ mit der Veröffentlichung von ISO 14577 mit den drei Teilen: - Teil 1: Prüfverfahren - Teil 2: Prüfung und Kalibrierung der Prüfmaschinen - Teil 3: Kalibrierung von Referenzproben ihren erfolgreichen Abschluss. KW - Härteprüfung KW - Eindringtechnik KW - Mechanische Eigenschaften KW - Schichtprüfung KW - Prüfmaschine PY - 2002 SN - 0011-4952 VL - 81 IS - 10 SP - 684 EP - 689 PB - Beuth-Vertrieb CY - Berlin AN - OPUS4-1739 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Falkenhagen, Jana A1 - Much, Helmut A1 - Stauf, W. A1 - Müller, A. H. E. T1 - Characterization of block copolymers by liquid adsorption chromatography at critical conditions. 1. Diblock copolymers N2 - Liquid adsorption chromatography at critical conditions (LACCC) in normal and in reversed-phase modes provides independent information on the molar mass distributions of both blocks of poly(methyl methacrylate)-block-poly(tert-butyl methacrylate), even if no information about the precursor is available. In addition, the amount of unreacted precursor can be determined, even if its molar mass is comparable to that of the total block copolymer. The reversal of elution order by changing of stationary and mobile phases makes it possible to independently characterize each block in the SEC mode of the LACCC system. Thus, complete structural information is obtained even without using two-dimensional chromatographic techniques. PY - 2000 DO - https://doi.org/10.1021/ma991903j SN - 0024-9297 SN - 1520-5835 VL - 33 IS - 10 SP - 3687 EP - 3693 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2172 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Gaal, Mate A1 - Guelle, D. A1 - Lewis, A. A1 - Sieber, A. T1 - Performance Demonstration for Humanitarian Demining N2 - Because the demining process is always connected with a danger for human beings, it is necessary to make sure the proper functioning of mine searching equipment in detecting mines. Detecting a hidden target by penetrating physical interaction of rays or waves is similar to non-destructive testing. The non-destructive testing profession developed procedures to check the reliability of testing. These procedures, like the performance demonstration where the successful detections are statistically evaluated against false call rates and their implementation in an industrial standard (ASME section XI appendix VIII) are used as a template. A first adoption to demining was accomplished in the prescription for blind trials in the CEN workshop agreement CWA 14747: 2003 for test and evaluation of metal detectors. Within an ITEP project a number of blind trials were carried out to learn about the necessary statistical basis of those trials to achieve true, reproducible and repeatable results to give guidance for the selection and improvement of metal detectors. The special focus in this first investigation was on the influence of the human factor due to the different degree of experience of the operators and the influence of the soil. PY - 2003 DO - https://doi.org/10.1515/mt-2003-0004 SN - 0025-5300 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. VL - 45 IS - 11-12 SP - 504 EP - 512 PB - Carl Hanser Verlag CY - München AN - OPUS4-2786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lietze, Dieter T1 - Flammensperren mit Bandsicherungen zur Sicherung von Meßsystemen KW - Flammensperren KW - Sicherung von Meßsystemen KW - Bandsicherungen KW - Detonationsgrenzen PY - 1999 DO - https://doi.org/10.1002/cite.330711114 SN - 0009-286X SN - 1522-2640 VL - 71 IS - 11 SP - 1295 EP - 1300 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Balke, Christian A1 - Ludwig, Jörg T1 - Brandversuch mit einem Eisenbahnkesselwagen N2 - Im Rahmen eines Versuchs sollten die Versagensgrenzen eines mit Fluessiggas gefuellten Eisenbahnkesselwagens bei Unterfeuerung ermittelt werden. Untersucht wurden die Auswirkungen eines Unfallfeuers auf einen mit Fluessiggas teilgefuellten Waggon sowie die Konsequenzen, die sich hieraus im Falle eines brandbedingten Berstens hinsichtlich Truemmerflug sowie Druck- und Temperaturbelastung fuer die Umgebung ergeben. Beschrieben werden der Versuchsaufbau, die Versuchsdurchfuehrung sowie wesentliche Ergebnisse und Konsequenzen aus dem Versuch. Unter anderem wird festgehalten, dass durch das Zerbersten des Behaelters mit schlagartiger Verdampfung und anschliessender Zuendung des Fluessiggases Auswirkungen hervorgerufen werden koennen, die im Brandfall in relativ kurzer Zeit eine ernsthafte Gefahr entstehen lassen, und denen durch geeignete sicherheitstechnische Massnahmen begegnet werden sollte. KW - EKW KW - Eisenbahnkesselwagen KW - Flüssiggase PY - 2000 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 41 IS - 9 SP - 54 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Colla, Camilla A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Höhberger, H.-J. A1 - Sommer, H. T1 - Combination of NDT techniques for site investigation of non-ballasted railway tracks N2 - Today's civil engineering NDT needs are for quantitative, fast to apply and easy to interpret methods. They are required on site both for evaluation of existing structures/infrastructure and for quality control in new construction. With this purpose, BAM has carried out in-situ feasibility studies, using radar, impact-echo and ultrasonic-echo methods. Two examples are given of their combined application on different railway slab–track constructions, using high frequency radar, scanning impact-echo and ultrasonic array methods. The aim was to evaluate limitations and advantages, comparability and complementarity of these methods. The on-site measurements demonstrated the possibility to investigate, with good accuracy via NDT, the bonding conditions between sleepers and slab, to locate voids and measure layer thickness. The acoustic and electromagnetic methods used, were found to be complementary. KW - Concrete KW - NDT KW - Impact echo KW - Ultrasonics KW - Radar KW - Railway PY - 2002 DO - https://doi.org/10.1016/S0963-8695(01)00033-0 SN - 0963-8695 VL - 35 SP - 95 EP - 105 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-1858 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Rieck, C. A1 - Hillemeier, B. A1 - Hasenstab, A. T1 - Hohlstellenortung in Holzbalken mit dem Ultraschallverfahren N2 - Zusammenfassung: Sehr klares Echo - der Rückwand - der künstlich eingebrachten Fehlstellen - der Schäden in Faserrichtung (Kernfäulenachbildung) T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung CY - Weimar, Germany DA - 06.05.2002 KW - Kernfäule KW - Standsicherheit KW - Schadenserkennung PY - 2002 AN - OPUS4-3883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lausch, Regine A1 - Wiggenhauser, Herbert A1 - Schubert, F. T1 - Geometrieeffekte und Hüllrohrortung bei der Impaktecho-Prüfung von Betonbauteilen - Experimentelle und modelltheoretische Ergebnisse N2 - Das Impaktecho-Verfahren wird seit vielen Jahren zur zerstörungsfreien Untersuchung von Betonbauteilen eingesetzt. Um die Mechanismen der elastischen Wellenausbreitung besser zu verstehen und den Einfluss von Geometrieeffekten auf das Messergebnis herauszuarbeiten, wurden Messungen und numerische Simulationen an einer Betonplatte mit drei innenliegenden Hüllrohren durchgeführt. T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung CY - Weimar, Germany DA - 06.05.2002 KW - Numerische Simulation KW - Betonplatte KW - Hüllrohre PY - 2002 AN - OPUS4-3886 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Streicher, Doreen A1 - Krause, Martin A1 - Kroggel, O. A1 - Schickert, M. A1 - Müller, W. T1 - Ultraschallecho an Beton - Definition von Kenngrößen zur Beurteilung der Leistungsfähigkeit von bildgebenden Verfahren N2 - Für die Strukturaufklärung von Betonbauteilen existieren mehrere bildgebende Ultraschallecho-Verfahren, u. a. mit Nutzung des Prinzips der synthetischen Apertur. Die Ergebnisse werden mit unterschiedlichen Verfahren, mit oder ohne Anwendung von Rekonstruktionsrechnungen, ausgewertet und in der Regel als B- bzw. C-Bilder dargestellt. Ziel ist es, die unterschiedlichen Verfahren anhand von Messreihen an Testkörpern mit bekannten Prüfobjekten in Hinblick auf Ihre Leistungsfähigkeit quantitativ zu fassen und zu vergleichen, um den Einsatz der Prüfverfahren bei Untersuchungen unbekannter Objekte zu optimieren. Dazu wurden drei Kenngrößen definiert. Als erster Schritt erfolgte die Anwendung der Definitionen auf vorliegende Messergebnisse zu einer in einem 50 cm dicken Betontestkörper parallel zur Messfläche eingebrachten Bohrung. T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung CY - Weimar, Germany DA - 06.05.2002 KW - Strukturaufklärung KW - Rekonstruktionsrechnungen KW - Betontestkörper PY - 2002 AN - OPUS4-3896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dähne, Siegfried A1 - v.Berlepsch, H. A1 - Böttcher, C. A1 - Quart, A. A1 - Burger, C. A1 - Kirstein, S. T1 - Supramolecular Structures of J-Aggregates of Carbocyanine Dyes in Solution N2 - Light- and small-angle neutron scattering as well as cryo-transmission electron microscopy (cryo-TEM) studies were performed to probe the structure of J-aggregates formed by a series of achiral dye molecules of the 5,5',6,6'-tetrachlorobenzimidacarbocyanine chromophore having 1,1'-dialkyl substituents combined with 3,3'-bis(4-sulfobutyl)-3,3'-bis(4-carboxybutyl) or 3,3'-bis(3-carboxypropyl) substituents. Assemblies that display a dependence on the substituents different complex supramolecular structures of nanometer-to-micrometer size have been directly visualized by cryo-TEM. The superstructures span from monomolecular layers formed by the 1,1'-diethyl-3,3'-bis(4-sulfobutyl) derivative and stacks of bilayer ribbons in the case of the 1,1'-dioctyl-3,3'-bis(4-carboxybutyl) derivative to twisted ropelike structures for the chiral aggregate of the 1,1'-dioctyl-3,3'-bis(3-carboxypropyl)-substituted chromophore. PY - 2000 DO - https://doi.org/10.1021/jp000220z SN - 1520-6106 SN - 1520-5207 SN - 1089-5647 VL - 104 IS - 22 SP - 5255 EP - 5262 PB - Soc. CY - Washington, DC AN - OPUS4-862 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dähne, Siegfried A1 - v.Berlepsch, H. A1 - Böttcher, C. A1 - Quart, A. A1 - Regenbrecht, M. A1 - Akari, S. A1 - Keiderling, U. A1 - Schnablegger, H. A1 - Kirstein, S. T1 - Surfactant-induced changes of morphology of J-aggregates: Superhelix-to-tubule transformation N2 - The morphology of the J-aggregates formed after the addition of ionic surfactants into solutions of the 3,3'-bis(3-carboxypropyl)-5,5',6,6'-tetrachloro-1,1'-dioctylbenzimidacarbocyanine dye (C8O3) was characterized by absorption and circular dichroism spectroscopy, cryogenic temperature transmission electron microscopy, scanning force microscopy, and small-angle neutron scattering. The optical activity of the C8O3 J-aggregates, existing in aqueous solution as superhelices composed of tubular single strands, disappears upon addition of both cationic and anionic surfactants. This is accompanied by distinct spectral changes in the visible region as well as changes of the aggregates' morphology. The anionic surfactant sodium dodecyl sulfate induces the formation of single-walled tubules of 15 nm diameter and 300-600 nm length, which completely transform after several days into thick multilamellar tubes of micrometer length. The cationic surfactant trimethyltetradecylammonium bromide first produces vesicles that later transform again into tubular aggregates of nanometer thickness and micrometer length. PY - 2000 DO - https://doi.org/10.1021/la000014i SN - 0743-7463 SN - 1520-5827 VL - 16 IS - 14 SP - 5908 EP - 5916 PB - American Chemical Society CY - Washington, DC AN - OPUS4-863 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen T1 - Ultrasound on-line cure monitoring for industrial applications N2 - In recent years eure monitoring with ultrasonic methods became more important. An on-line measurement System for industrial applications is presented in this paper. It operates in through-transmission and the measured parameters are the sound velocity and the attenuation of the sound wave. An objective of this paper is to establish the ränge of possible applications for an ultrasonic eure monitoring System. KW - Ultrasonic monitoring KW - Cure process KW - Composite material KW - Process controlling PY - 2000 SN - 0963-6935 PB - Woodhead Publ. CY - Cambridge AN - OPUS4-1061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Wolfgang A1 - Adam, Karin A1 - Hüttig, C. T1 - Zur Alterung von Smalten - Materialuntersuchungen bei der Restaurierung eines Gründerzeit-Mosaiks N2 - Das Mosaik "Muse der Kunst" war in Berlin-Mitte mehrere Jahrzehnte hinter einer Vermauerung verborgen, bevor es nun wiederentdeckt und restauriert wurde. Die Smalten zeigten zum Teil Risse, Verkrustungen und Farbveränderungen in Folge von Alterungsprozessen der historischen Materialien. Einzelne Deckgläser von Goldsmalten waren abgesprengt. PY - 2001 SN - 0933-4017 VL - 107 IS - 3 SP - 194 EP - 199 PB - Callwey CY - München AN - OPUS4-1009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberle, Arno A1 - Klingbeil, Dietmar A1 - Schicker, Johannes T1 - The calculation of dynamic JR-curves from the finite element analysis of a Charpy test using a rate-dependent damage model N2 - A two-dimensional analysis of the Charpy V-notch specimen subjected to impact loading, according to the standard DIN EN 10045-1, is carried out, using a transient explicit dynamic finite element program. An elastic-viscoplastic, temperature dependent, constitutive relation for a porous plastic solid based on the Gurson damage model is developed. Ductile fracture of the matrix material will be described by the nucleation and subsequent growth of voids to coalescence. An updated Lagrange–Jaumann formulation is employed accounting for large strain and rotation. The discretization is based on four-node plane strain solid elements with one Gauss point. The equations of motion are integrated numerically by an explicit integration algorithm utilising a lumped mass matrix. The predictions of the numerical analysis in terms of force deflection response, crack resistance behaviour and deformation energy absorbtion are compared with results from Charpy tests which were carried out according to the low-blow technique. PY - 2000 SN - 0029-5493 SN - 1872-759X VL - 198 IS - 1-2 SP - 75 EP - 87 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-995 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Supper, Reinhard T1 - Das Portal der Bibliothek der BAM T2 - Berliner Arbeitskreis Information, BAM CY - Berlin, Germany DA - 2002-11-11 PY - 2002 AN - OPUS4-1976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Supper, Reinhard A1 - Harloff-Puhr, Jan T1 - Informationsmanagement in der Bundesanstalt für Materialforschung und -prüfung T2 - BAM-Kolloquium CY - Berlin, Germany DA - 2002-11-06 PY - 2002 N1 - Geburtsname von Harloff-Puhr, Jan: Harloff, J. - Birth name of Harloff-Puhr, Jan: Harloff, J. AN - OPUS4-1977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brink, Arne A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Anwendung der Impuls-Thermografie als zerstörungsfreies Prüfverfahren im Bauwesen N2 - Ziel der Untersuchungen ist die Weiterentwicklung der Impuls-Thermografie als quantitatives zerstörungsfreies Prüfverfahren zur Ortung oberflächennaher Inhomogenitäten in Bauteilen und Bauwerken. Zur Zeit werden Putzablösungen auf Mauerwerk bzw. Beton, Hohlstellen und Kiesnester in Beton, Ablösungen und Hohlstellen bei Spaltklinkern im Dickbettmörtel auf Beton, Verbundprobleme von CFK-Laminaten auf Beton sowie Ablösungen von Bitumen-Abdichtungsbahnen auf Stahl untersucht. T2 - Fachtagung (BAUFACH) "Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen" CY - Leipzig, Germany DA - 25.10.2001 KW - Mauerwerk KW - Hohlstellen KW - CFK-Laminate PY - 2001 AN - OPUS4-3300 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lietze, Dieter T1 - Grenze der Flammendurchschlagsicherheit von Sperrschichten aus Brandsicherungen bei Deflagrationen und bei einem Nachbrand KW - Flammenduchschlagsicherheit KW - Gas KW - Sperrschicht PY - 1995 DO - https://doi.org/10.1002/cite.330671208 SN - 0009-286X SN - 1522-2640 VL - 67 IS - 12 SP - 1618 EP - 1620 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Krause, Martin A1 - Müller, W. A1 - Crail, S. T1 - Zerstörungsfreie Risscharakterisierung in Betonbauteilen mit Ultraschall N2 - Die Risstiefenbestimmung in Festen Fahrbahnen ist hinsichtlich der Dauerhaftigkeit der Konstruktion von wesentlichem Interesse. Im Rahmen eines gemeinsamen Forschungsvorhabens mit der DB AG wurden aus der Literatur bekannte Ansätze bewertet und darauf aufbauend ein Verfahren zur bildgebenden Rissdarstellung entwickelt. Rissüberbrückende Bewehrung sowie Kontaktstellen zwischen den Rissflanken wirken als Schallbrücken und erschweren die Risscharakterisierung, wie bei einem Einsatz an einer Betriebserprobungsstrecke festgestellt wurde. Ein aus der Literatur bekanntes Verfahren der einfachen Laufzeitmessung erwies sich für die Tiefenbestimmung von realen verunreinigten Rissen als ungeeignet. T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen CY - Leipzig, Germany DA - 25.10.2001 PY - 2001 VL - 76-CD SP - 1 EP - 10 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-1188 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mittag, Kornelia A1 - Colla, Camilla A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Schneider, Gerhard A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - Zerstörungsfreie Messungen zur Beurteilung des inneren Zustandes fester Fahrbahnen der Deutschen Bahn AG: Vergleichsmessungen an Probeaufbauten im Labor N2 - Im Rahmen eines FE-Projektes “Inspektion Fester Fahrbahnen“ der BAM und der Deutschen Bahn AG geht es um die Anwendung und weitere Entwicklung zerstörungsfreier Messverfahren zur Beurteilung des Zustandes Fester Fahrbahnen. Nach ersten Versuchsreihen direkt im Gleis wurden für verschiedene Bauarten die charakteristischen Herstellungsbedingungen simuliert und systematisch untersucht. Die kombinierte Anwendung der drei Messverfahren Ultraschall-Array-, Impakt-Echo- und Impuls-Radar-Verfahren wird hier an dem Beispiel “Betonschwelle in Betoneinbettung” dargestellt. T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen CY - Leipzig, Germany DA - 25.10.2001 KW - Impakt-Echo-Messverfahren KW - Impuls-Radar-Messverfahren KW - Ultraschall-Array-Messverfahren PY - 2001 VL - 76-CD SP - 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-1201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bishop, J. L. A1 - Pieters, C. M. A1 - Dyar, M. D. A1 - Hamilton, V. E. A1 - Harloff-Puhr, Jan T1 - A spectral, chemical and mineralogical study of Mars analogue rocks N2 - A consortium has recently been initiated to study the macroscopic and microscopic properties of basaltic and andesitic rocks as analogue materials for Mars. The goal of this project is the integration of diverse spectroscopic approaches to evaluate the composition and texture of Mars materials using both in situ and remote sensing techniques. Initial emphasis is placed on assessment of the mineral composition for low albedo areas (basalt vs andesite vs weathering) of the Martian surface through spectral analysis of a suite of samples that have been exceptionally well characterized in the laboratory. The initial results indicate that the visible/NIR reflectance spectra, mid-IR reflectance and emission spectra, and Mössbauer spectra contain consistent diagnostic features associated with the measured modal mineralogy and provide baseline data for the first group of well characterized basalts. The consortium study involves integrating multiple remote sensing techniques for recent and upcoming missions to Mars in order to compare the results obtained by these instruments and thereby strengthen interpretive results. T2 - 33rd Lunar and Planetary Science Conference CY - Houston, TX, USA DA - 2002-03-11 PY - 2002 UR - http://www.lpi.usra.edu/meetings/lpsc2002/pdf/1168.pdf SN - 0161-5297 N1 - Geburtsname von Harloff-Puhr, Jan: Harloff, J. - Birth name of Harloff-Puhr, Jan: Harloff, J. N1 - Serientitel: LPI contribution – Series title: LPI contribution IS - 1109 SP - 1 EP - 2, paper #1168 PB - Lunar and Planetary Institute CY - Houston, Tex. AN - OPUS4-1218 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maultzsch, Matthias T1 - The utilization of processed building rubble - A contribution of sustainability in concrete technology T2 - Polish Concrete Days Conference CY - Szczyrk, Poland DA - 08.10.2002 PY - 2002 SP - 629 EP - 639 PB - Polski Cement CY - Kraków AN - OPUS4-1547 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath T1 - Contribution to ultrasound cure control for composite manufacturing N2 - The curing conditions play an important role in the quality assurance of composite products. Especially as composite materials are widely used in high tech areas so that they are required to fulfil high quality Standards. Some problems which occur during curing, for instance undercuring, can hardly be detected using Standard NDT investigations, mainly because they are manifested only at high temperatures, particularly close to glass-rubber-transition. On-line eure monitoring has the outstanding advantage that it can monitor the material parameters even at the highest temperatures possible. In recent years eure monitoring with ultrasonic methods has become more populär. In comparison to dielectric methods mechanical parameters are measured directly. The quantities to be measured are the velocity and the attenuation of the sound wave. On this basis the storage and loss modulus can be calculated. Depending on the form of excitation with longitudinal or transversal waves these moduli are referred to as long wave or shear modulus. Well developed Computer based technology and sensor materials are available in the non-destructive testing (NDT) market. The measuring equipment employed a commercial NDT System, which worked computer-aided. With a special Software the demands of automatic Operation under industrial conditions was accomplished. This measurement equipment was tested on composites. Its structure, performance and some practical results will be presented in the following paper. T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 15.10.2000 PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn482/idn482.htm SN - 1435-4934 VL - 5 IS - 11 PB - NDT.net CY - Kirchwald AN - OPUS4-2136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fischer, Joachim A1 - Isecke, Bernd T1 - Korrosionsschäden - Phänomene und Mechanismen, Schäden unter Wärmedämmungen N2 - Die wichtigste Aufgabe von Dämmstoffen in betriebstechnischen Anlagen ist, Energie zu sparen. Oft gewünschte Nebeneffekte sind Brandschutz, Schallschutz und die Erleichterung der Temperatursteuerung in verfahrenstechnischen Prozessen. Betriebstechnische Anlagen sind Produktions- und Verteilungsanlagen im Industriebau und in der Haustechnik, z.B. Apparate, Behälter, Kolonnen, Tanks, Dampferzeuger, Rohrleitungen, Heizungs- und Lüftungs-, Klima-, Kalt- und Warmwasseranlagen. Dämmungen an Gebäuden und Bauwerken, im Schiff- und Fahrzeugbau sollen hier nicht erörtert werden. Je nach Anlagentemperatur unterscheidet man zwischen Wärmedämmung für Betriebstemperaturen über der Umgebungstemperatur und Kältedämmung für Betriebstemperaturen unter der Umgebungstemperatur. Kältedämmungen werden auch an Anlagen durchgeführt, bei denen durch wechselnde Betriebstemperaturen die Taupunkttemperatur der Umgebungsluft zeitweise unterschritten wird. Beide Dämmungen bestehen in betriebstechnischen Anlagen aus Dämmstoff, Stütz- und Tragkonstruktion sowie der Ummantelung. Manchmal wird zusätzlich eine Dmpfbremse vorgesehen, mit deren Hilfe das Eindringen von Feuchtigkeit verhindert werden soll. Das ist vor allem bei Kälteanlagen erforderlich und bei Anlagen deren Temperaturen stark schwanken. T2 - 29. VDI-Jahrestagung "Schadensanalyse" CY - Würzburg, Germany DA - 16.10.2003 PY - 2003 SN - 3-18-091765-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1765 SP - 1 EP - 9 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rudolphi, Reinald A1 - Müller, Renate T1 - Programme INSTATCP for the 3D-computation under transient boundary conditions using Delphi and Windows N2 - The PC computer programme written in Borland Pascal for Borland Delphi under Windows 98/NT performs the transient analysis of three-dimensional structures subjected to surface heat flux, convective and radiative heat transfer, internal heat generation and temperature boundary conditions. The non-linearity may be due to either temperature dependent material properties or non-linear boundary conditions. The program is applicable to structures comprised of one or more materials. It uses a Network of cubic or prismatic volume elements, finite-volume method and a very efficient predictor-corrector differential equation System solver for stiff Problems to facilitate consideration of non-linearity, Radiation heat transfer between triangular/square Areas, latent heat in the calculation of temperature in materials such as freezing of water into ice or humid concrete and convection heat transfer in flow through tubes and ducts. Colour graphics are represented in VGA on screen or can be printed using PostScript/PCL on colour/laser Printer or into a file. By worked examples the application area of the PC computer program INSTATCP is demonstrated. KW - calculation KW - temperatures KW - transient KW - 3D KW - PC KW - programme PY - 2003 SP - 1 EP - 43 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-2603 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reck, J. A1 - Beck, Uwe A1 - Dohrmann, J. T1 - Electrodeposition of CdSe Films: In-Situ Study by Spectroscopic Ellipsometry N2 - CdSe films grown on Ti-coated polished steel by constant-current deposition from an aqueous solution containing selenosulfite and cadmium nitrilotriacetate have been studied by spectroscopic ellipsometry under in-situ conditions. Ellipsometric parameters, tan? and cos?, were measured both as a function of deposition time at ? = 825 nm and of wavelength (? = 500-900 nm) for constant film thickness from 0.02 µm to 2.3 µm. The model used for data analysis, Ti-substrate | TiO2 | CdSe-film | solution, with optically homogenous phases was valid for film thickness larger than 0.3 µm. Refractive indices and extinction coefficients of the 2.3-µm film were derived for ? = 500–900 nm. A direct band-gap of 1.72 eV was determined. The faradaic efficiency of electrodeposition was 0.93 for a current density of 50 µA cm-2. KW - Ellipsometry KW - CdSe Films PY - 2000 DO - https://doi.org/10.1524/zpch.2000.214.1.083 SN - 0942-9352 SN - 2196-7156 SN - 0044-3336 SN - 0044-3328 VL - 214 IS - 1 SP - 83 EP - 93 PB - Oldenbourg CY - München AN - OPUS4-3562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brzezinka, Klaus-Werner A1 - Trunschke, A. A1 - Hoang, D. L. A1 - Radnik, J. A1 - Brückner, A. A1 - Lieske, H. T1 - Transition metal oxide/carbon composite catalysts for n-alkane aromatization: Structure and catalytic properties N2 - Nanocrystalline particles of high temperature pretreated titania, zirconia or hafnium oxide, embedded in a carbon matrix, have been found to catalyze the aromatization of n-octane into ethylbenzene (EB) and o-xylene (OX) with high selectivity. The carbon matrix itself is catalytically not active, but seems to co-operate with the transition metal oxides in such a way that the various metal oxide/carbon composite materials exhibit equal selectivity patterns. In detail, the carbon component stabilizes a high dispersion of the oxides during the high temperature pretreatment procedure. This thermal treatment results in a destruction of surface acidity of the oxides, which would otherwise be responsible for undesirable consecutive and parallel reactions. Moreover, the carbon component is involved in the deep dehydrogenation of alkanes to multiple unsaturated alkenes. This is explained by the ability of surface carbon atoms to interact with hydrogen. The bulk and surface structure of the catalysts have been characterized by XRD, specific surface area measurements, XPS, UPS, Raman spectroscopy, in situ ESR and DRIFT spectroscopy. KW - Aromatization KW - Dehydrocyclization KW - n-Octane KW - Monofunctional catalysts KW - Zirconia KW - Titania KW - Oxide/carbon composites PY - 2001 DO - https://doi.org/10.1016/S0926-860X(00)00736-5 SN - 0926-860X SN - 1873-3875 VL - 208 IS - 1-2 SP - 381 EP - 392 PB - Elsevier CY - Amsterdam AN - OPUS4-1083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kinder, Joachim A1 - Segebade, Christian A1 - Klein, M. T1 - Metallurgical examinations of medieval sword blades T2 - SCANNING 2001 CY - New York, NY, USA DA - 2001-05-05 PY - 2001 DO - https://doi.org/10.1002/sca.4950230201 SN - 0161-0457 SN - 1932-8745 VL - 23 IS - 2 SP - 103 PB - Wiley CY - Hoboken, NJ AN - OPUS4-1121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meinhold, Uwe A1 - Mellmann, Günter A1 - Maultzsch, Matthias ED - Malhotra, V. M. T1 - Performance of high-grade concrete with full substitution of aggregates by recycled concrete N2 - On the background of the need for reuse of building rubble and the saving of natural resources, a European Union research project was performed covering concrete technology and durability aspects. A very special precondition was the use of large-scale processed building rubble with unknown origin and the total replacement of aggregates above 2 mm. Comprehensive tests were carried out on the properties of the starting material from different processing plants and fresh concrete, particularly the interdependence of water addition and wor ability. Investigations on hardened concrete properties included strength devel-opment, creep and shrinkage, modulus of elasticity, capillary absorption, freezing and thawing resistance, and carbonation behavior over a long period. The results demonstrate that the industrial production of a high-grade, durable concrete is possible. The project is a promising contribution for sustainable development. T2 - Third CANMET/ACI International Symposium on Sustainable Development of Cement and Concrete CY - San Francisco, CA, USA DA - 16.09.2001 KW - Aggregates KW - Compressive strength KW - Concrete KW - Creep KW - Modulus of elasticity KW - Recycled concrete KW - Shrinkage PY - 2001 SN - 0-87031-041-0 N1 - Serientitel: ACI SP – Series title: ACI SP IS - SP 202 SP - 85 EP - 96 PB - American Concrete Institute (ACI) CY - Farmington Hills, Mich. AN - OPUS4-1933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Isecke, Bernd A1 - Fischer, Joachim T1 - Phänomene und Mechanismen - Lange unbemerkt: Schäden unter Dämmstoffen N2 - Bei der Planung von Betriebstechnischen Anlagen erfolgt die Auswahl der Art der Dämmarbeiten zuerst nach wärmetechnischen Gesichtspunkten, den Anschaffungskosten, der Verfügbarkeit und Verarbeitbarkeit. Besonders bei großen industriellen Projekten sind Dämmarbeiten, weil sie ein nicht so stark kapitalintensiver Faktor sind, meist von geringerer Wichtung. Dies ändert sich erst dann, wenn durch versteckte Korrosionsprobleme Schäden entstehen, in deren Folge nach Ausfall ganzer Anlagenteile beispielsweise erhebliche Produktionsverluste entstehen können. KW - Korrosion KW - Dämmstoffe KW - Kältedämmung KW - Wärmedämmung PY - 2005 SN - 0036-4401 VL - 70 IS - 5 SP - 70 EP - 75 PB - Krammer CY - Düsseldorf AN - OPUS4-7445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther A1 - Berghoff, Werner T1 - Über die Verteilung und das Verbleiben von Fluor-Verbindungen in Kiefernholz im Laufe längerer Zeit N2 - Anlaß und Aufgabe dev Untersuchungen — Angaben zur Versuchsausführung — Ergebnisse über die Fluorid-Verteilung — Der Schutzsalz-Gehalt von rd. 5 und rd. 11 Jahre lang gelagerten Hölzern — Schlußfolgerungen über das Verbleiben von Fluor-Verbindungen im Holz — Zusammenfassung — Schrifttum. PY - 1965 SN - 0018-3768 VL - 23 IS - 9 SP - 347 EP - 354 PB - Springer CY - Berlin AN - OPUS4-10426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Becker, Günther T1 - Aufnahme, Eindringstiefe und quantitative Verteilung eines Chrom-Flour-Arsen-Schutzsalzgemisches in Fichten- und Kiefermasten nach Kesseldruckverfahren N2 - Anlaß und Aufgabe der Untersuchungen — Versuchsausführung: Holzauswahl; Tränkung, Verwiegen; Lagerung der getränkten Maste; Probenentnahme; Bestimmung der Fluorid-Eindringtiefen; Bestimmung des Schutzsalz-Gehaltes und seiner Verteilung; Statistische Auswertungsverfahren — Aufnahme an Schutzsalz-Lösung — Fluorid-Eindringtiefe : Fichte; Kiefer — Mengen-Verteilung von Fluor und Chrom: Fichte; Kiefer — Folgerungen aus den Ergebnissen: Einfluß von Holzart und Holzeigenschaften; Bemerkungen zum Tränkerfolg; Gesichtspunkte für eine Gütekontrolle — Zusammenfassung — Schrifttum. PY - 1965 SN - 0018-3768 VL - 23 IS - 9 SP - 369 EP - 381 PB - Springer CY - Berlin AN - OPUS4-10428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theden, Gerda A1 - Kottlors, Christoph A1 - Becker, Günther T1 - Versuche zur Beurteilung der Zirkon-Alizarin-Reaktion für den Nachweis fluorhaltiger Holzschutzmittel N2 - Problemlage — Die chemischen Vorgänge bei der ZA-Reaktion — Versuche mit der ZA-Reaktion in Lösungen — Versuche mit der ZA-Reaktion auf Holzflächen — Schlußfolgerungen — Zusammenfassung — Schrifttum. PY - 1964 SN - 0018-3768 VL - 22 IS - 12 SP - 460 EP - 465 PB - Springer CY - Berlin AN - OPUS4-10352 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs T1 - The micro X-Ray fluorescence analysis (MXRF) T2 - Stand H23/R012, BAM CY - Berlin, Germany DA - 2006-05-02 PY - 2006 AN - OPUS4-12484 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs T1 - Lime mortar for the conservation of the Timur Shah Mausoleum T2 - Standort H23/R012, BAM CY - Berlin, Germany DA - 02.05.2006 PY - 2006 AN - OPUS4-12486 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Holzfreie Papiere PY - 1900 VL - 18 IS - 6 SP - 279 EP - 293 PB - Springer CY - Berlin AN - OPUS4-13295 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leuschke, Günter T1 - Selbstentzündung von staubförmigen Materialien PY - 1976 SP - 145 EP - 159 PB - Vereinigung zur Förderung des Deutschen Brandschutzes CY - Karlsruhe AN - OPUS4-8432 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Werner, Otto T1 - Die Röntgen-Fluoreszenz-Spektranalyse und ihre Bedeutung für die Metallkunde PY - 1955 SN - 0003-8962 VL - 26 IS - 12 SP - 721 EP - 737 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-9755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Ueber die Ergebnisse der Untersuchungen von 49 dänischen Papiersorten PY - 1888 VL - 6 IS - 2 SP - 69 EP - 77 PB - Springer CY - Berlin AN - OPUS4-12738 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Ueber Abweichungen der Werthe für Reißlänge und Bruchdehnung bei Versuchsstreifen aus demselben Bogen PY - 1888 VL - 6 IS - 2 SP - 78 EP - 83 PB - Springer CY - Berlin AN - OPUS4-12740 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehage, Hermann T1 - Ueber die maßgebenden Dehnungen bei Körpern, welche nach mehreren Richtungen zugleich beansprucht werden PY - 1888 VL - 6 IS - 3 SP - 89 EP - 98 PB - Springer CY - Berlin AN - OPUS4-12744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schendler, Thomas T1 - Die Gefahrstoffverordnung 2000 T2 - BAM- Kolloquium CY - Berlin, Germany DA - 2000-11-15 PY - 2000 AN - OPUS4-12708 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martens, Adolf T1 - Die Festigkeitseigenschaften des Magnesiums PY - 1887 VL - 5 IS - Ergänzungsheft 1 SP - 1 EP - 40 + 3 Tafeln PB - Springer CY - Berlin AN - OPUS4-12721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther ED - Sharpley, J. T1 - Physical, Chemical and Biological Factors Influencing the Damage of Wood and other Materials by Termites N2 - Termites are one of the main insects that destroy materials. Physical, Chemical, and biological factors influencing the damage to wood and other materials by termites are discussed. Within the physical factors, environmental influences of temperature, humidity, and electromagnetic field conditions and material properties of hardness, surface, and internal structure and thickness of foils and fibres should be observed. The Chemical factors involved are sensorial influences such as repellency, attraction, and Stimulation and toxic influences such as toxic efficiency, effect on symbionts, and aging of effective substances. Biological factors include termite behaviour connected with gnawing activity, influence of Substrates, and choice or compulsory tests and various other biological factors such as species and race of the termites, number and composition of groups as well as vitality and developmental stage of the colony. T2 - 3rd International Biodegradation Symposium CY - Kingston, RI, USA DA - 17.08.1975 PY - 1976 SN - 0-85334-679-8 SP - 259 EP - 271 PB - Applied Science Publ. CY - London AN - OPUS4-8462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther T1 - Treatment of Wood by Diffusion of Salts N2 - A brief survey is given on the treatment of wood by diffusion of salts. The compounds used for this process, mainly boron and fluorine compounds, are mentioned and the factors influencing diffusion described. The main precondition condition is a high moisture content of the wood above 40 per cent. Fields of application are fresh roundwood, remedial treatment of poles and sleepers, preservation of posts and especially of building and other sawn timber. The treatment of building timber by spraying, dipping or soaking should be followed by the diffusion process which may provide, in a simple and cheap way, deep penetration of salts into the wood including species refractory to pressure methods. PY - 1976 SN - 0020-3203 VL - 7 IS - 4 SP - 30 EP - 36 CY - London AN - OPUS4-8467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Treumann, Hartwig T1 - Explosive Stoffe PY - 1967 SN - 3-433-00497-8 SP - 1251 EP - 1259 PB - Ernst CY - Berlin ET - 4., neubearb. AN - OPUS4-10586 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Normalpapiere PY - 1893 VL - 11 IS - 1 SP - 1 EP - 4 PB - Springer CY - Berlin AN - OPUS4-12905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -