TY - JOUR A1 - Lietze, Dieter A1 - Pinkofsky, Horst T1 - Einfluß des Durchmessers auf die Beanspruchung von Rohrleitungen bei detonativ verlaufenden Gasreaktionen N2 - Bei detonativ verlaufenden Reaktionen müssen mehrere Belastungsfälle unterschieden werden, bei denen es zu unterschiedlich hohen Beanspruchungen an den jeweils belasteten Bauteilen einer Rohrleitung kommt. Bei Untersuchungen der BAM zu diesem Fragenkomplex ist festgestellt worden, dass bei der Belastung, die beim Durchlaufen einer stabilen Detonation unter stationären Bedingungen an der Rohrwand auftritt, der bei der Druckmessung ermittelte maximale Explosionsdruck für die Bemessung der Rohrleitung bei diesem Belastungsfall herangezogen werden kann. Durch Druckmessungen bei stabilen Detonationen unter stationären Bedingungen in Rohrleitungen mit unterschiedlich großem Durchmesser wurde die Abhängigkeit des Detonationsdruckes vom Rohrdurchmesser näher untersucht. Auch auf den Belastungsfall der Reflexion einer stabilen Detonation bei stationären Bedingungen und auf die extremen Belastungsfälle beim Durchlaufen und bei der Reflexion einer instabilen Detonation bei extrem instationären Bedingungen, d.h. am Umschlagspunkt zur Detonation, wird eingegangen. KW - Rohrleitung KW - Durchmesser KW - Detonation KW - Gas PY - 1996 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 37 IS - 5 SP - 33 EP - 37 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-671 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brekow, Gerhard A1 - Erhard, Anton T1 - Untersuchungen mit TOFD an geschweißten Längsnahtproben N2 - Im Gegensatz zur Impuls-Echo-Technik, die im Wesentlichen auf der Anton Erhard, Berlin Reflexion am Fehler basiert, wird bei der Time-Of-Flight Diffraction Technique (TOFD-Technik) die Beugung der Schallwellen am Fehler zum Nachweis genutzt. Zwei Winkelprüfköpfe für Longitudinalwellen sind in V-Durchschallung angeordnet. Die Prüfköpfe befinden sich jeweils auf einer Seite der Schweißnaht und werden bei der Messung parallel zur Schweißnaht verschoben. Das ausgesandte Schallbündel trifft auf Fehlerränder, an denen gebeugte Wellenanteile entstehen, die je nach Entstehungsort mit unterschiedlichen Schalllaufzeiten empfangen, in hochfrequenten A-Bildern abgespeichert und für die Auswertung in B-Bildern dargestellt werden. Die Untersuchungen zeigen, dass die TOFD-Technik Beiträge zur Fehlergrößenabschätzung liefert, aber keinesfalls die Impuls-Echo- Technik mit nachgeschalteter Röntgenprüfung ersetzen kann. PY - 2000 SN - 0025-5300 VL - 42 IS - 11-12 SP - 437 EP - 443 PB - Carl Hanser Verlag CY - München AN - OPUS4-963 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartoll, Jens A1 - Nofz, Marianne A1 - Stößer, R. T1 - Generation and conversion of electronic defects in calcium carbonates by UV/Vis light N2 - Radical species like CO-2,CO-3, SO-2, and SO-3 can be created by exposing natural and synthetic calcium carbonates to sunlight or to the light of a Hg(Xe) lamp. This poses as a risk for ESR dating of these materials, because the radicals formed by light exposure cannot be distinguished from those generated by radioactivity. Furthermore, paramagnetic centers like SO-2, electrons trapped near Zn2+ or Cd2+ ions, surface defects, and radicals with g?=2.0040, can be bleached in ?-irradiated samples by light and show conversion effects. KW - ESR PY - 2000 DO - https://doi.org/10.1016/S0969-8043(00)00044-0 SN - 0883-2889 SN - 0969-8043 IS - 52 SP - 1099 EP - 1105 PB - Elsevier CY - Amsterdam AN - OPUS4-892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehrstedt, A. A1 - Ullner, Christian T1 - Erfolgreicher Abschluss der Normungsarbeit "Instrumentierte Eindringprüfung" - ISO 14577 ist veröffentlicht N2 - Im Oktober 2002 fand die Normungsarbeit zur „Instrumentierten Eindringprüfung“ mit der Veröffentlichung von ISO 14577 mit den drei Teilen: - Teil 1: Prüfverfahren - Teil 2: Prüfung und Kalibrierung der Prüfmaschinen - Teil 3: Kalibrierung von Referenzproben ihren erfolgreichen Abschluss. KW - Härteprüfung KW - Eindringtechnik KW - Mechanische Eigenschaften KW - Schichtprüfung KW - Prüfmaschine PY - 2002 SN - 0011-4952 VL - 81 IS - 10 SP - 684 EP - 689 PB - Beuth-Vertrieb CY - Berlin AN - OPUS4-1739 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Falkenhagen, Jana A1 - Much, Helmut A1 - Stauf, W. A1 - Müller, A. H. E. T1 - Characterization of block copolymers by liquid adsorption chromatography at critical conditions. 1. Diblock copolymers N2 - Liquid adsorption chromatography at critical conditions (LACCC) in normal and in reversed-phase modes provides independent information on the molar mass distributions of both blocks of poly(methyl methacrylate)-block-poly(tert-butyl methacrylate), even if no information about the precursor is available. In addition, the amount of unreacted precursor can be determined, even if its molar mass is comparable to that of the total block copolymer. The reversal of elution order by changing of stationary and mobile phases makes it possible to independently characterize each block in the SEC mode of the LACCC system. Thus, complete structural information is obtained even without using two-dimensional chromatographic techniques. PY - 2000 DO - https://doi.org/10.1021/ma991903j SN - 0024-9297 SN - 1520-5835 VL - 33 IS - 10 SP - 3687 EP - 3693 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2172 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Gaal, Mate A1 - Guelle, D. A1 - Lewis, A. A1 - Sieber, A. T1 - Performance Demonstration for Humanitarian Demining N2 - Because the demining process is always connected with a danger for human beings, it is necessary to make sure the proper functioning of mine searching equipment in detecting mines. Detecting a hidden target by penetrating physical interaction of rays or waves is similar to non-destructive testing. The non-destructive testing profession developed procedures to check the reliability of testing. These procedures, like the performance demonstration where the successful detections are statistically evaluated against false call rates and their implementation in an industrial standard (ASME section XI appendix VIII) are used as a template. A first adoption to demining was accomplished in the prescription for blind trials in the CEN workshop agreement CWA 14747: 2003 for test and evaluation of metal detectors. Within an ITEP project a number of blind trials were carried out to learn about the necessary statistical basis of those trials to achieve true, reproducible and repeatable results to give guidance for the selection and improvement of metal detectors. The special focus in this first investigation was on the influence of the human factor due to the different degree of experience of the operators and the influence of the soil. PY - 2003 DO - https://doi.org/10.1515/mt-2003-0004 SN - 0025-5300 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. VL - 45 IS - 11-12 SP - 504 EP - 512 PB - Carl Hanser Verlag CY - München AN - OPUS4-2786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lietze, Dieter T1 - Flammensperren mit Bandsicherungen zur Sicherung von Meßsystemen KW - Flammensperren KW - Sicherung von Meßsystemen KW - Bandsicherungen KW - Detonationsgrenzen PY - 1999 DO - https://doi.org/10.1002/cite.330711114 SN - 0009-286X SN - 1522-2640 VL - 71 IS - 11 SP - 1295 EP - 1300 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Balke, Christian A1 - Ludwig, Jörg T1 - Brandversuch mit einem Eisenbahnkesselwagen N2 - Im Rahmen eines Versuchs sollten die Versagensgrenzen eines mit Fluessiggas gefuellten Eisenbahnkesselwagens bei Unterfeuerung ermittelt werden. Untersucht wurden die Auswirkungen eines Unfallfeuers auf einen mit Fluessiggas teilgefuellten Waggon sowie die Konsequenzen, die sich hieraus im Falle eines brandbedingten Berstens hinsichtlich Truemmerflug sowie Druck- und Temperaturbelastung fuer die Umgebung ergeben. Beschrieben werden der Versuchsaufbau, die Versuchsdurchfuehrung sowie wesentliche Ergebnisse und Konsequenzen aus dem Versuch. Unter anderem wird festgehalten, dass durch das Zerbersten des Behaelters mit schlagartiger Verdampfung und anschliessender Zuendung des Fluessiggases Auswirkungen hervorgerufen werden koennen, die im Brandfall in relativ kurzer Zeit eine ernsthafte Gefahr entstehen lassen, und denen durch geeignete sicherheitstechnische Massnahmen begegnet werden sollte. KW - EKW KW - Eisenbahnkesselwagen KW - Flüssiggase PY - 2000 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 41 IS - 9 SP - 54 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Rieck, C. A1 - Hillemeier, B. A1 - Hasenstab, A. T1 - Hohlstellenortung in Holzbalken mit dem Ultraschallverfahren N2 - Zusammenfassung: Sehr klares Echo - der Rückwand - der künstlich eingebrachten Fehlstellen - der Schäden in Faserrichtung (Kernfäulenachbildung) T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung CY - Weimar, Germany DA - 06.05.2002 KW - Kernfäule KW - Standsicherheit KW - Schadenserkennung PY - 2002 AN - OPUS4-3883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lausch, Regine A1 - Wiggenhauser, Herbert A1 - Schubert, F. T1 - Geometrieeffekte und Hüllrohrortung bei der Impaktecho-Prüfung von Betonbauteilen - Experimentelle und modelltheoretische Ergebnisse N2 - Das Impaktecho-Verfahren wird seit vielen Jahren zur zerstörungsfreien Untersuchung von Betonbauteilen eingesetzt. Um die Mechanismen der elastischen Wellenausbreitung besser zu verstehen und den Einfluss von Geometrieeffekten auf das Messergebnis herauszuarbeiten, wurden Messungen und numerische Simulationen an einer Betonplatte mit drei innenliegenden Hüllrohren durchgeführt. T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung CY - Weimar, Germany DA - 06.05.2002 KW - Numerische Simulation KW - Betonplatte KW - Hüllrohre PY - 2002 AN - OPUS4-3886 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Streicher, Doreen A1 - Krause, Martin A1 - Kroggel, O. A1 - Schickert, M. A1 - Müller, W. T1 - Ultraschallecho an Beton - Definition von Kenngrößen zur Beurteilung der Leistungsfähigkeit von bildgebenden Verfahren N2 - Für die Strukturaufklärung von Betonbauteilen existieren mehrere bildgebende Ultraschallecho-Verfahren, u. a. mit Nutzung des Prinzips der synthetischen Apertur. Die Ergebnisse werden mit unterschiedlichen Verfahren, mit oder ohne Anwendung von Rekonstruktionsrechnungen, ausgewertet und in der Regel als B- bzw. C-Bilder dargestellt. Ziel ist es, die unterschiedlichen Verfahren anhand von Messreihen an Testkörpern mit bekannten Prüfobjekten in Hinblick auf Ihre Leistungsfähigkeit quantitativ zu fassen und zu vergleichen, um den Einsatz der Prüfverfahren bei Untersuchungen unbekannter Objekte zu optimieren. Dazu wurden drei Kenngrößen definiert. Als erster Schritt erfolgte die Anwendung der Definitionen auf vorliegende Messergebnisse zu einer in einem 50 cm dicken Betontestkörper parallel zur Messfläche eingebrachten Bohrung. T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung CY - Weimar, Germany DA - 06.05.2002 KW - Strukturaufklärung KW - Rekonstruktionsrechnungen KW - Betontestkörper PY - 2002 AN - OPUS4-3896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dähne, Siegfried A1 - v.Berlepsch, H. A1 - Böttcher, C. A1 - Quart, A. A1 - Burger, C. A1 - Kirstein, S. T1 - Supramolecular Structures of J-Aggregates of Carbocyanine Dyes in Solution N2 - Light- and small-angle neutron scattering as well as cryo-transmission electron microscopy (cryo-TEM) studies were performed to probe the structure of J-aggregates formed by a series of achiral dye molecules of the 5,5',6,6'-tetrachlorobenzimidacarbocyanine chromophore having 1,1'-dialkyl substituents combined with 3,3'-bis(4-sulfobutyl)-3,3'-bis(4-carboxybutyl) or 3,3'-bis(3-carboxypropyl) substituents. Assemblies that display a dependence on the substituents different complex supramolecular structures of nanometer-to-micrometer size have been directly visualized by cryo-TEM. The superstructures span from monomolecular layers formed by the 1,1'-diethyl-3,3'-bis(4-sulfobutyl) derivative and stacks of bilayer ribbons in the case of the 1,1'-dioctyl-3,3'-bis(4-carboxybutyl) derivative to twisted ropelike structures for the chiral aggregate of the 1,1'-dioctyl-3,3'-bis(3-carboxypropyl)-substituted chromophore. PY - 2000 DO - https://doi.org/10.1021/jp000220z SN - 1520-6106 SN - 1520-5207 SN - 1089-5647 VL - 104 IS - 22 SP - 5255 EP - 5262 PB - Soc. CY - Washington, DC AN - OPUS4-862 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dähne, Siegfried A1 - v.Berlepsch, H. A1 - Böttcher, C. A1 - Quart, A. A1 - Regenbrecht, M. A1 - Akari, S. A1 - Keiderling, U. A1 - Schnablegger, H. A1 - Kirstein, S. T1 - Surfactant-induced changes of morphology of J-aggregates: Superhelix-to-tubule transformation N2 - The morphology of the J-aggregates formed after the addition of ionic surfactants into solutions of the 3,3'-bis(3-carboxypropyl)-5,5',6,6'-tetrachloro-1,1'-dioctylbenzimidacarbocyanine dye (C8O3) was characterized by absorption and circular dichroism spectroscopy, cryogenic temperature transmission electron microscopy, scanning force microscopy, and small-angle neutron scattering. The optical activity of the C8O3 J-aggregates, existing in aqueous solution as superhelices composed of tubular single strands, disappears upon addition of both cationic and anionic surfactants. This is accompanied by distinct spectral changes in the visible region as well as changes of the aggregates' morphology. The anionic surfactant sodium dodecyl sulfate induces the formation of single-walled tubules of 15 nm diameter and 300-600 nm length, which completely transform after several days into thick multilamellar tubes of micrometer length. The cationic surfactant trimethyltetradecylammonium bromide first produces vesicles that later transform again into tubular aggregates of nanometer thickness and micrometer length. PY - 2000 DO - https://doi.org/10.1021/la000014i SN - 0743-7463 SN - 1520-5827 VL - 16 IS - 14 SP - 5908 EP - 5916 PB - American Chemical Society CY - Washington, DC AN - OPUS4-863 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen T1 - Ultrasound on-line cure monitoring for industrial applications N2 - In recent years eure monitoring with ultrasonic methods became more important. An on-line measurement System for industrial applications is presented in this paper. It operates in through-transmission and the measured parameters are the sound velocity and the attenuation of the sound wave. An objective of this paper is to establish the ränge of possible applications for an ultrasonic eure monitoring System. KW - Ultrasonic monitoring KW - Cure process KW - Composite material KW - Process controlling PY - 2000 SN - 0963-6935 PB - Woodhead Publ. CY - Cambridge AN - OPUS4-1061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Wolfgang A1 - Adam, Karin A1 - Hüttig, C. T1 - Zur Alterung von Smalten - Materialuntersuchungen bei der Restaurierung eines Gründerzeit-Mosaiks N2 - Das Mosaik "Muse der Kunst" war in Berlin-Mitte mehrere Jahrzehnte hinter einer Vermauerung verborgen, bevor es nun wiederentdeckt und restauriert wurde. Die Smalten zeigten zum Teil Risse, Verkrustungen und Farbveränderungen in Folge von Alterungsprozessen der historischen Materialien. Einzelne Deckgläser von Goldsmalten waren abgesprengt. PY - 2001 SN - 0933-4017 VL - 107 IS - 3 SP - 194 EP - 199 PB - Callwey CY - München AN - OPUS4-1009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberle, Arno A1 - Klingbeil, Dietmar A1 - Schicker, Johannes T1 - The calculation of dynamic JR-curves from the finite element analysis of a Charpy test using a rate-dependent damage model N2 - A two-dimensional analysis of the Charpy V-notch specimen subjected to impact loading, according to the standard DIN EN 10045-1, is carried out, using a transient explicit dynamic finite element program. An elastic-viscoplastic, temperature dependent, constitutive relation for a porous plastic solid based on the Gurson damage model is developed. Ductile fracture of the matrix material will be described by the nucleation and subsequent growth of voids to coalescence. An updated Lagrange–Jaumann formulation is employed accounting for large strain and rotation. The discretization is based on four-node plane strain solid elements with one Gauss point. The equations of motion are integrated numerically by an explicit integration algorithm utilising a lumped mass matrix. The predictions of the numerical analysis in terms of force deflection response, crack resistance behaviour and deformation energy absorbtion are compared with results from Charpy tests which were carried out according to the low-blow technique. PY - 2000 SN - 0029-5493 SN - 1872-759X VL - 198 IS - 1-2 SP - 75 EP - 87 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-995 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Supper, Reinhard T1 - Das Portal der Bibliothek der BAM T2 - Berliner Arbeitskreis Information, BAM CY - Berlin, Germany DA - 2002-11-11 PY - 2002 AN - OPUS4-1976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Supper, Reinhard A1 - Harloff-Puhr, Jan T1 - Informationsmanagement in der Bundesanstalt für Materialforschung und -prüfung T2 - BAM-Kolloquium CY - Berlin, Germany DA - 2002-11-06 PY - 2002 N1 - Geburtsname von Harloff-Puhr, Jan: Harloff, J. - Birth name of Harloff-Puhr, Jan: Harloff, J. AN - OPUS4-1977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lietze, Dieter T1 - Grenze der Flammendurchschlagsicherheit von Sperrschichten aus Brandsicherungen bei Deflagrationen und bei einem Nachbrand KW - Flammenduchschlagsicherheit KW - Gas KW - Sperrschicht PY - 1995 DO - https://doi.org/10.1002/cite.330671208 SN - 0009-286X SN - 1522-2640 VL - 67 IS - 12 SP - 1618 EP - 1620 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Krause, Martin A1 - Müller, W. A1 - Crail, S. T1 - Zerstörungsfreie Risscharakterisierung in Betonbauteilen mit Ultraschall N2 - Die Risstiefenbestimmung in Festen Fahrbahnen ist hinsichtlich der Dauerhaftigkeit der Konstruktion von wesentlichem Interesse. Im Rahmen eines gemeinsamen Forschungsvorhabens mit der DB AG wurden aus der Literatur bekannte Ansätze bewertet und darauf aufbauend ein Verfahren zur bildgebenden Rissdarstellung entwickelt. Rissüberbrückende Bewehrung sowie Kontaktstellen zwischen den Rissflanken wirken als Schallbrücken und erschweren die Risscharakterisierung, wie bei einem Einsatz an einer Betriebserprobungsstrecke festgestellt wurde. Ein aus der Literatur bekanntes Verfahren der einfachen Laufzeitmessung erwies sich für die Tiefenbestimmung von realen verunreinigten Rissen als ungeeignet. T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen CY - Leipzig, Germany DA - 25.10.2001 PY - 2001 VL - 76-CD SP - 1 EP - 10 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-1188 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bishop, J. L. A1 - Pieters, C. M. A1 - Dyar, M. D. A1 - Hamilton, V. E. A1 - Harloff-Puhr, Jan T1 - A spectral, chemical and mineralogical study of Mars analogue rocks N2 - A consortium has recently been initiated to study the macroscopic and microscopic properties of basaltic and andesitic rocks as analogue materials for Mars. The goal of this project is the integration of diverse spectroscopic approaches to evaluate the composition and texture of Mars materials using both in situ and remote sensing techniques. Initial emphasis is placed on assessment of the mineral composition for low albedo areas (basalt vs andesite vs weathering) of the Martian surface through spectral analysis of a suite of samples that have been exceptionally well characterized in the laboratory. The initial results indicate that the visible/NIR reflectance spectra, mid-IR reflectance and emission spectra, and Mössbauer spectra contain consistent diagnostic features associated with the measured modal mineralogy and provide baseline data for the first group of well characterized basalts. The consortium study involves integrating multiple remote sensing techniques for recent and upcoming missions to Mars in order to compare the results obtained by these instruments and thereby strengthen interpretive results. T2 - 33rd Lunar and Planetary Science Conference CY - Houston, TX, USA DA - 2002-03-11 PY - 2002 UR - http://www.lpi.usra.edu/meetings/lpsc2002/pdf/1168.pdf SN - 0161-5297 N1 - Geburtsname von Harloff-Puhr, Jan: Harloff, J. - Birth name of Harloff-Puhr, Jan: Harloff, J. N1 - Serientitel: LPI contribution – Series title: LPI contribution IS - 1109 SP - 1 EP - 2, paper #1168 PB - Lunar and Planetary Institute CY - Houston, Tex. AN - OPUS4-1218 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maultzsch, Matthias T1 - The utilization of processed building rubble - A contribution of sustainability in concrete technology T2 - Polish Concrete Days Conference CY - Szczyrk, Poland DA - 08.10.2002 PY - 2002 SP - 629 EP - 639 PB - Polski Cement CY - Kraków AN - OPUS4-1547 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath T1 - Contribution to ultrasound cure control for composite manufacturing N2 - The curing conditions play an important role in the quality assurance of composite products. Especially as composite materials are widely used in high tech areas so that they are required to fulfil high quality Standards. Some problems which occur during curing, for instance undercuring, can hardly be detected using Standard NDT investigations, mainly because they are manifested only at high temperatures, particularly close to glass-rubber-transition. On-line eure monitoring has the outstanding advantage that it can monitor the material parameters even at the highest temperatures possible. In recent years eure monitoring with ultrasonic methods has become more populär. In comparison to dielectric methods mechanical parameters are measured directly. The quantities to be measured are the velocity and the attenuation of the sound wave. On this basis the storage and loss modulus can be calculated. Depending on the form of excitation with longitudinal or transversal waves these moduli are referred to as long wave or shear modulus. Well developed Computer based technology and sensor materials are available in the non-destructive testing (NDT) market. The measuring equipment employed a commercial NDT System, which worked computer-aided. With a special Software the demands of automatic Operation under industrial conditions was accomplished. This measurement equipment was tested on composites. Its structure, performance and some practical results will be presented in the following paper. T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 15.10.2000 PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn482/idn482.htm SN - 1435-4934 VL - 5 IS - 11 PB - NDT.net CY - Kirchwald AN - OPUS4-2136 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fischer, Joachim A1 - Isecke, Bernd T1 - Korrosionsschäden - Phänomene und Mechanismen, Schäden unter Wärmedämmungen N2 - Die wichtigste Aufgabe von Dämmstoffen in betriebstechnischen Anlagen ist, Energie zu sparen. Oft gewünschte Nebeneffekte sind Brandschutz, Schallschutz und die Erleichterung der Temperatursteuerung in verfahrenstechnischen Prozessen. Betriebstechnische Anlagen sind Produktions- und Verteilungsanlagen im Industriebau und in der Haustechnik, z.B. Apparate, Behälter, Kolonnen, Tanks, Dampferzeuger, Rohrleitungen, Heizungs- und Lüftungs-, Klima-, Kalt- und Warmwasseranlagen. Dämmungen an Gebäuden und Bauwerken, im Schiff- und Fahrzeugbau sollen hier nicht erörtert werden. Je nach Anlagentemperatur unterscheidet man zwischen Wärmedämmung für Betriebstemperaturen über der Umgebungstemperatur und Kältedämmung für Betriebstemperaturen unter der Umgebungstemperatur. Kältedämmungen werden auch an Anlagen durchgeführt, bei denen durch wechselnde Betriebstemperaturen die Taupunkttemperatur der Umgebungsluft zeitweise unterschritten wird. Beide Dämmungen bestehen in betriebstechnischen Anlagen aus Dämmstoff, Stütz- und Tragkonstruktion sowie der Ummantelung. Manchmal wird zusätzlich eine Dmpfbremse vorgesehen, mit deren Hilfe das Eindringen von Feuchtigkeit verhindert werden soll. Das ist vor allem bei Kälteanlagen erforderlich und bei Anlagen deren Temperaturen stark schwanken. T2 - 29. VDI-Jahrestagung "Schadensanalyse" CY - Würzburg, Germany DA - 16.10.2003 PY - 2003 SN - 3-18-091765-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1765 SP - 1 EP - 9 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-2643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rudolphi, Reinald A1 - Müller, Renate T1 - Programme INSTATCP for the 3D-computation under transient boundary conditions using Delphi and Windows N2 - The PC computer programme written in Borland Pascal for Borland Delphi under Windows 98/NT performs the transient analysis of three-dimensional structures subjected to surface heat flux, convective and radiative heat transfer, internal heat generation and temperature boundary conditions. The non-linearity may be due to either temperature dependent material properties or non-linear boundary conditions. The program is applicable to structures comprised of one or more materials. It uses a Network of cubic or prismatic volume elements, finite-volume method and a very efficient predictor-corrector differential equation System solver for stiff Problems to facilitate consideration of non-linearity, Radiation heat transfer between triangular/square Areas, latent heat in the calculation of temperature in materials such as freezing of water into ice or humid concrete and convection heat transfer in flow through tubes and ducts. Colour graphics are represented in VGA on screen or can be printed using PostScript/PCL on colour/laser Printer or into a file. By worked examples the application area of the PC computer program INSTATCP is demonstrated. KW - calculation KW - temperatures KW - transient KW - 3D KW - PC KW - programme PY - 2003 SP - 1 EP - 43 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-2603 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reck, J. A1 - Beck, Uwe A1 - Dohrmann, J. T1 - Electrodeposition of CdSe Films: In-Situ Study by Spectroscopic Ellipsometry N2 - CdSe films grown on Ti-coated polished steel by constant-current deposition from an aqueous solution containing selenosulfite and cadmium nitrilotriacetate have been studied by spectroscopic ellipsometry under in-situ conditions. Ellipsometric parameters, tan? and cos?, were measured both as a function of deposition time at ? = 825 nm and of wavelength (? = 500-900 nm) for constant film thickness from 0.02 µm to 2.3 µm. The model used for data analysis, Ti-substrate | TiO2 | CdSe-film | solution, with optically homogenous phases was valid for film thickness larger than 0.3 µm. Refractive indices and extinction coefficients of the 2.3-µm film were derived for ? = 500–900 nm. A direct band-gap of 1.72 eV was determined. The faradaic efficiency of electrodeposition was 0.93 for a current density of 50 µA cm-2. KW - Ellipsometry KW - CdSe Films PY - 2000 DO - https://doi.org/10.1524/zpch.2000.214.1.083 SN - 0942-9352 SN - 2196-7156 SN - 0044-3336 SN - 0044-3328 VL - 214 IS - 1 SP - 83 EP - 93 PB - Oldenbourg CY - München AN - OPUS4-3562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brzezinka, Klaus-Werner A1 - Trunschke, A. A1 - Hoang, D. L. A1 - Radnik, J. A1 - Brückner, A. A1 - Lieske, H. T1 - Transition metal oxide/carbon composite catalysts for n-alkane aromatization: Structure and catalytic properties N2 - Nanocrystalline particles of high temperature pretreated titania, zirconia or hafnium oxide, embedded in a carbon matrix, have been found to catalyze the aromatization of n-octane into ethylbenzene (EB) and o-xylene (OX) with high selectivity. The carbon matrix itself is catalytically not active, but seems to co-operate with the transition metal oxides in such a way that the various metal oxide/carbon composite materials exhibit equal selectivity patterns. In detail, the carbon component stabilizes a high dispersion of the oxides during the high temperature pretreatment procedure. This thermal treatment results in a destruction of surface acidity of the oxides, which would otherwise be responsible for undesirable consecutive and parallel reactions. Moreover, the carbon component is involved in the deep dehydrogenation of alkanes to multiple unsaturated alkenes. This is explained by the ability of surface carbon atoms to interact with hydrogen. The bulk and surface structure of the catalysts have been characterized by XRD, specific surface area measurements, XPS, UPS, Raman spectroscopy, in situ ESR and DRIFT spectroscopy. KW - Aromatization KW - Dehydrocyclization KW - n-Octane KW - Monofunctional catalysts KW - Zirconia KW - Titania KW - Oxide/carbon composites PY - 2001 DO - https://doi.org/10.1016/S0926-860X(00)00736-5 SN - 0926-860X SN - 1873-3875 VL - 208 IS - 1-2 SP - 381 EP - 392 PB - Elsevier CY - Amsterdam AN - OPUS4-1083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kinder, Joachim A1 - Segebade, Christian A1 - Klein, M. T1 - Metallurgical examinations of medieval sword blades T2 - SCANNING 2001 CY - New York, NY, USA DA - 2001-05-05 PY - 2001 DO - https://doi.org/10.1002/sca.4950230201 SN - 0161-0457 SN - 1932-8745 VL - 23 IS - 2 SP - 103 PB - Wiley CY - Hoboken, NJ AN - OPUS4-1121 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meinhold, Uwe A1 - Mellmann, Günter A1 - Maultzsch, Matthias ED - Malhotra, V. M. T1 - Performance of high-grade concrete with full substitution of aggregates by recycled concrete N2 - On the background of the need for reuse of building rubble and the saving of natural resources, a European Union research project was performed covering concrete technology and durability aspects. A very special precondition was the use of large-scale processed building rubble with unknown origin and the total replacement of aggregates above 2 mm. Comprehensive tests were carried out on the properties of the starting material from different processing plants and fresh concrete, particularly the interdependence of water addition and wor ability. Investigations on hardened concrete properties included strength devel-opment, creep and shrinkage, modulus of elasticity, capillary absorption, freezing and thawing resistance, and carbonation behavior over a long period. The results demonstrate that the industrial production of a high-grade, durable concrete is possible. The project is a promising contribution for sustainable development. T2 - Third CANMET/ACI International Symposium on Sustainable Development of Cement and Concrete CY - San Francisco, CA, USA DA - 16.09.2001 KW - Aggregates KW - Compressive strength KW - Concrete KW - Creep KW - Modulus of elasticity KW - Recycled concrete KW - Shrinkage PY - 2001 SN - 0-87031-041-0 N1 - Serientitel: ACI SP – Series title: ACI SP IS - SP 202 SP - 85 EP - 96 PB - American Concrete Institute (ACI) CY - Farmington Hills, Mich. AN - OPUS4-1933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Isecke, Bernd A1 - Fischer, Joachim T1 - Phänomene und Mechanismen - Lange unbemerkt: Schäden unter Dämmstoffen N2 - Bei der Planung von Betriebstechnischen Anlagen erfolgt die Auswahl der Art der Dämmarbeiten zuerst nach wärmetechnischen Gesichtspunkten, den Anschaffungskosten, der Verfügbarkeit und Verarbeitbarkeit. Besonders bei großen industriellen Projekten sind Dämmarbeiten, weil sie ein nicht so stark kapitalintensiver Faktor sind, meist von geringerer Wichtung. Dies ändert sich erst dann, wenn durch versteckte Korrosionsprobleme Schäden entstehen, in deren Folge nach Ausfall ganzer Anlagenteile beispielsweise erhebliche Produktionsverluste entstehen können. KW - Korrosion KW - Dämmstoffe KW - Kältedämmung KW - Wärmedämmung PY - 2005 SN - 0036-4401 VL - 70 IS - 5 SP - 70 EP - 75 PB - Krammer CY - Düsseldorf AN - OPUS4-7445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther A1 - Berghoff, Werner T1 - Über die Verteilung und das Verbleiben von Fluor-Verbindungen in Kiefernholz im Laufe längerer Zeit N2 - Anlaß und Aufgabe dev Untersuchungen — Angaben zur Versuchsausführung — Ergebnisse über die Fluorid-Verteilung — Der Schutzsalz-Gehalt von rd. 5 und rd. 11 Jahre lang gelagerten Hölzern — Schlußfolgerungen über das Verbleiben von Fluor-Verbindungen im Holz — Zusammenfassung — Schrifttum. PY - 1965 SN - 0018-3768 VL - 23 IS - 9 SP - 347 EP - 354 PB - Springer CY - Berlin AN - OPUS4-10426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Becker, Günther T1 - Aufnahme, Eindringstiefe und quantitative Verteilung eines Chrom-Flour-Arsen-Schutzsalzgemisches in Fichten- und Kiefermasten nach Kesseldruckverfahren N2 - Anlaß und Aufgabe der Untersuchungen — Versuchsausführung: Holzauswahl; Tränkung, Verwiegen; Lagerung der getränkten Maste; Probenentnahme; Bestimmung der Fluorid-Eindringtiefen; Bestimmung des Schutzsalz-Gehaltes und seiner Verteilung; Statistische Auswertungsverfahren — Aufnahme an Schutzsalz-Lösung — Fluorid-Eindringtiefe : Fichte; Kiefer — Mengen-Verteilung von Fluor und Chrom: Fichte; Kiefer — Folgerungen aus den Ergebnissen: Einfluß von Holzart und Holzeigenschaften; Bemerkungen zum Tränkerfolg; Gesichtspunkte für eine Gütekontrolle — Zusammenfassung — Schrifttum. PY - 1965 SN - 0018-3768 VL - 23 IS - 9 SP - 369 EP - 381 PB - Springer CY - Berlin AN - OPUS4-10428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theden, Gerda A1 - Kottlors, Christoph A1 - Becker, Günther T1 - Versuche zur Beurteilung der Zirkon-Alizarin-Reaktion für den Nachweis fluorhaltiger Holzschutzmittel N2 - Problemlage — Die chemischen Vorgänge bei der ZA-Reaktion — Versuche mit der ZA-Reaktion in Lösungen — Versuche mit der ZA-Reaktion auf Holzflächen — Schlußfolgerungen — Zusammenfassung — Schrifttum. PY - 1964 SN - 0018-3768 VL - 22 IS - 12 SP - 460 EP - 465 PB - Springer CY - Berlin AN - OPUS4-10352 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs T1 - The micro X-Ray fluorescence analysis (MXRF) T2 - Stand H23/R012, BAM CY - Berlin, Germany DA - 2006-05-02 PY - 2006 AN - OPUS4-12484 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs T1 - Lime mortar for the conservation of the Timur Shah Mausoleum T2 - Standort H23/R012, BAM CY - Berlin, Germany DA - 02.05.2006 PY - 2006 AN - OPUS4-12486 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Holzfreie Papiere PY - 1900 VL - 18 IS - 6 SP - 279 EP - 293 PB - Springer CY - Berlin AN - OPUS4-13295 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Leuschke, Günter T1 - Selbstentzündung von staubförmigen Materialien PY - 1976 SP - 145 EP - 159 PB - Vereinigung zur Förderung des Deutschen Brandschutzes CY - Karlsruhe AN - OPUS4-8432 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Werner, Otto T1 - Die Röntgen-Fluoreszenz-Spektranalyse und ihre Bedeutung für die Metallkunde PY - 1955 SN - 0003-8962 VL - 26 IS - 12 SP - 721 EP - 737 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-9755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Ueber die Ergebnisse der Untersuchungen von 49 dänischen Papiersorten PY - 1888 VL - 6 IS - 2 SP - 69 EP - 77 PB - Springer CY - Berlin AN - OPUS4-12738 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Ueber Abweichungen der Werthe für Reißlänge und Bruchdehnung bei Versuchsstreifen aus demselben Bogen PY - 1888 VL - 6 IS - 2 SP - 78 EP - 83 PB - Springer CY - Berlin AN - OPUS4-12740 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehage, Hermann T1 - Ueber die maßgebenden Dehnungen bei Körpern, welche nach mehreren Richtungen zugleich beansprucht werden PY - 1888 VL - 6 IS - 3 SP - 89 EP - 98 PB - Springer CY - Berlin AN - OPUS4-12744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schendler, Thomas T1 - Die Gefahrstoffverordnung 2000 T2 - BAM- Kolloquium CY - Berlin, Germany DA - 2000-11-15 PY - 2000 AN - OPUS4-12708 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martens, Adolf T1 - Die Festigkeitseigenschaften des Magnesiums PY - 1887 VL - 5 IS - Ergänzungsheft 1 SP - 1 EP - 40 + 3 Tafeln PB - Springer CY - Berlin AN - OPUS4-12721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther ED - Sharpley, J. T1 - Physical, Chemical and Biological Factors Influencing the Damage of Wood and other Materials by Termites N2 - Termites are one of the main insects that destroy materials. Physical, Chemical, and biological factors influencing the damage to wood and other materials by termites are discussed. Within the physical factors, environmental influences of temperature, humidity, and electromagnetic field conditions and material properties of hardness, surface, and internal structure and thickness of foils and fibres should be observed. The Chemical factors involved are sensorial influences such as repellency, attraction, and Stimulation and toxic influences such as toxic efficiency, effect on symbionts, and aging of effective substances. Biological factors include termite behaviour connected with gnawing activity, influence of Substrates, and choice or compulsory tests and various other biological factors such as species and race of the termites, number and composition of groups as well as vitality and developmental stage of the colony. T2 - 3rd International Biodegradation Symposium CY - Kingston, RI, USA DA - 17.08.1975 PY - 1976 SN - 0-85334-679-8 SP - 259 EP - 271 PB - Applied Science Publ. CY - London AN - OPUS4-8462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther T1 - Treatment of Wood by Diffusion of Salts N2 - A brief survey is given on the treatment of wood by diffusion of salts. The compounds used for this process, mainly boron and fluorine compounds, are mentioned and the factors influencing diffusion described. The main precondition condition is a high moisture content of the wood above 40 per cent. Fields of application are fresh roundwood, remedial treatment of poles and sleepers, preservation of posts and especially of building and other sawn timber. The treatment of building timber by spraying, dipping or soaking should be followed by the diffusion process which may provide, in a simple and cheap way, deep penetration of salts into the wood including species refractory to pressure methods. PY - 1976 SN - 0020-3203 VL - 7 IS - 4 SP - 30 EP - 36 CY - London AN - OPUS4-8467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Treumann, Hartwig T1 - Explosive Stoffe PY - 1967 SN - 3-433-00497-8 SP - 1251 EP - 1259 PB - Ernst CY - Berlin ET - 4., neubearb. AN - OPUS4-10586 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Normalpapiere PY - 1893 VL - 11 IS - 1 SP - 1 EP - 4 PB - Springer CY - Berlin AN - OPUS4-12905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartsch, C. T1 - Einfluß höherer Wärmegrade auf die Festigkeitseigenschaften von Pergament-, Pergamentersatz- und Pergamynpapieren PY - 1907 VL - 25 IS - 5 SP - 237 EP - 244 PB - Springer CY - Berlin AN - OPUS4-13539 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartsch, C. T1 - Kleine Mitteilungen aus Abteilung 3 (papier- und textiltechnische Prüfungen) - Vorbereitung von Pergamentpapieren für die mikroskopische Untersuchung PY - 1907 VL - 25 IS - 4 SP - 235 EP - 236 PB - Springer CY - Berlin AN - OPUS4-13553 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lietze, Dieter A1 - Pinkofsky, Horst T1 - Verlauf des Acetylen-Zerfalls in längeren Rohrleitungen PY - 1978 DO - https://doi.org/10.1002/cite.330501021 SN - 0009-286X SN - 1522-2640 VL - 50 IS - 10 SP - 808 EP - 809 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-8915 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Werner, Otto T1 - Beitrag zum Problem des dritten Partners in der quantitativen Emissionsspektralanalyse PY - 1959 SN - 0035-4341 VL - 9. Ser., 15 IS - 5 SP - 315 EP - 319 PB - Association des Ingénieurs Sortis de l'École de Liège CY - Liège AN - OPUS4-9987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martens, Adolf T1 - Anlage zum Jahresbericht 1911 - Aufgaben, Gliederung des Betriebes und Grundsätze für die Geschäftsführung des Amtes PY - 1912 VL - 30 IS - 5-6 SP - 297 EP - 308 PB - Springer CY - Berlin AN - OPUS4-13843 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nitsche, Michael A1 - Stephan, Martina A1 - Mätzner, Olaf T1 - BAM - Projekt "Informationsmanagement für den Bereich öffentlich-technische Sicherheit" T2 - BAM Kolloquium CY - Berlin, Germany DA - 2003-08-20 PY - 2003 AN - OPUS4-5248 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Treumann, Hartwig T1 - Grundlagen der Schutz- und Sicherheitsabstände PY - 1978 SN - 0340-9481 VL - 30 IS - 2 SP - 163 EP - 165 PB - Schmidt CY - Berlin AN - OPUS4-8907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Struck, Werner A1 - Limberger, Ernst A1 - Irmschler, H.-J. T1 - Die Energieübertragung auf leichte, nichttragende Bauteile beim Stoß mit einem Glaskugelsack im Vergleich zum Schulterstoß PY - 1978 SN - 0172-3006 SN - 1437-1030 VL - 9 IS - 5 SP - 129 EP - 136 PB - Ernst CY - Berlin AN - OPUS4-8861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Buro, Andreas A1 - Becker, Günther T1 - Der Einfluss von Wassergehalt, Eigenschaften und Veränderungen von Nadelhölzern auf die Diffusion von Natriumfluorid in der Zellwand N2 - Aufgabe der Untersuchungen - Versuchsausführung: Holzauswahl und Probenform — Vorbehandlung der Hölzer — Ausführung der Eindringversuche - Versuchsergebnisse: Gesetzmäßigkeiten der Diffusionsvorgänge — Einfluß der Holzfeuchtigkeit — Einfluß der Versuchszeit - Einfluß von Holzeigenschaften — Anatomische Richtung — Jahrringbau — Rohwichte — Verkernung — Harzgehalt — — Einfluß von Vorbehandlungen. Trocknungsart — Füllung der Zellumina mit Teer öl und Paraffin - Vergleich der Holzarten - Die Diffusion unter praktischen Verhältnissen — Zusammenfassung — Schrifttum. PY - 1956 SN - 0018-3768 VL - 14 IS - 1 SP - 388 EP - 403 PB - Springer CY - Berlin AN - OPUS4-9855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fontana, Patrick A1 - Meng, Birgit A1 - Hillemeier, B. T1 - Frühe autogene Verformungen von HPC - Beurteilung des plastischen Schwindens und spannungsinduzierender Verformungen durch Korrelation mit der Hydratationskinetik N2 - Der Einfluß der Mischungszusammensetzungen auf das frühe autogene Schwinden der Bindemittelmatrix von Hochleistungsbetonen wurde durch Korrelation mit der Hydratationskinetik untersucht. Durch die Analyse der Verformungsgeschwindigkeiten konnte eine Unterscheidung zwischen plastischen und spannungsinduzierenden Verformungen vorgenommen werden. T2 - 45. Forschungskolloquium des DAfStb CY - Wien, Österreich DA - 06.10.2005 KW - Hochleistungsbeton KW - Autogenes Schwinden KW - Hydratation KW - Porenstruktur PY - 2005 SN - 0005-9900 SN - 1437-1006 VL - 100 SP - 57 EP - 60 PB - Ernst CY - Berlin AN - OPUS4-11177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bohse, Jürgen A1 - Krietsch, Torsten A1 - Chen, J. H. A1 - Brunner, A. J. ED - Williams, J. G. ED - Pavan, A. T1 - Acoustic emission analysis and micro-mechanical interpretation of mode I fracture toughness tests on composite materials N2 - Mode I fracture toughness tests on Double Cantilever Beam specimens from carbon-fibre and glassfibre reinforced polymer-matrix composites were monitored with Acoustic Emission (AE) and loaddisplacement traces and delamination lengths were recorded. AE characterized the kinetics of delamination propagation. The progress of AE activity and AE intensity with load and AE source location plots are used to determine the delamination onset on the microscopic and macroscopic scale. Energy dissipating processes initiated in the damage zone near the delamination tip. Low Interface adhesion results in lower debonding stresses and larger damage zones compared with composites with good adhesion. Time-dependent linear location of AE sources yields the average length of the damage zone and the average speed of delamination propagation. Parameter analysis has been used empirically for identifying AE source mechanisms. A new Classification Software for transient AE waveforms permits identification of the source mechanism of individual AE signals. A micro-mechanical fracture model based on the AE results describes the contributions of microscopic matrix and Interface mechanisms to the interlaminar fracture energy. T2 - 2nd ESIS TC4 Conference on Fracture of Polymers, Composites, and Adhesives CY - Les Diablerets, Switzerland DA - 13.09.1999 KW - Mode I KW - DCB test KW - Acoustic emission analysis KW - Polymer composites KW - Damage zone KW - Micro-mechanisms KW - Interface adhesion KW - Micro-mechanical fracture model KW - Interlaminar fracture energy PY - 2000 SN - 0-08-043710-9 SN - 1566-1369 N1 - Serientitel: ESIS publication – Series title: ESIS publication IS - 27 SP - 15 EP - 26 PB - Elsevier CY - Amsterdam AN - OPUS4-4153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bohse, Jürgen T1 - Acoustic emission characteristics of micro-failure processes in polymer blends and composites N2 - Acoustic emission (AE) characteristics of micro-failure processes in HDPE/PP blends with and without compatibilizer, single-fibre composites (glass/epoxy, carbon/epoxy, glass/polycarbonate) and unidirectionally reinforced multi-fibre composites (glass/polypropylene) were studied. For blends, the number and the elastic fracture energy release of micro-failure processes are theoretically approximated and correlated with the number of AE signals and the AE energy. A qualitative correlation of the mechanical energy released from fibre/matrix debonding and fibre-fracture processes in single-fibre pull-out experiments with the measured AE energy is demonstrated. For the single-fibre fragmentation of glass fibres and carbon fibres, a quantitative approximation of the AE amplitudes at locations of the fragmentation sources is achieved. A new method for the selection of single transient acoustic emissions and the classification of failure mechanisms in composites is introduced. Selected emissions are classified into matrix cracking, fibre breakage and interface processes (fibre/matrix debonding or fibre pull-out) from their total power in defined frequency intervals of the spectral power density. A fracture-mechanics investigation of the delamination behaviour of unidirectional composites accompanied by AE examinations is discussed. The extension of the damage zone around the crack tip is quantified by the location of AE events and compared with the theoretically approximated dimensions. The size of the damage zone is used for theoretical calculations of the mechanical energy release from micro-failure processes. A correlation of the AE energy-release rates with the mechanical energy-release rates from participated failure mechanisms like matrix cacking, fibre/matrix debonding and fibre breakage is presented. KW - Polymer blends KW - Polymer-matrix composites KW - Fracture toughness KW - Delamination KW - Acoustic emission PY - 2000 DO - https://doi.org/10.1016/S0266-3538(00)00060-9 SN - 0266-3538 VL - 60 SP - 1213 EP - 1226 PB - Elsevier CY - Barking AN - OPUS4-4155 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Taffe, Alexander A1 - Gardei, André A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert T1 - Automatisierung zerstörungsfreier Prüfverfahren für das Bauwesen N2 - In der BAM wurde als Gemeinschaftsvorhaben der Fachgruppe „Zerstörungsfreie Schadensdiagnose und Umweltmessverfahren“ ein rechnergesteuerter Messabtaster für Bauwerksteile (Baustellenscanner) entwickelt. Es handelt sich um ein auf Schienen verfahrbares modulares System mit einem multifunktionalen Messkopf für mehrere zerstörungsfreie Prüfverfahren. Mit dem Baustellenscanner können Objekte wie Brücken oder Fundamentplatten schneller und genauer als bisher bei gleichzeitig reduziertem Personalaufwand untersucht werden. PY - 2004 DO - https://doi.org/10.1515/mt-2004-0397 SN - 0025-5300 VL - 46 IS - 7-8 SP - 397 EP - 403 PB - Carl Hanser Verlag CY - München AN - OPUS4-4401 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Aurich, Dietmar A1 - Baer, Wolfram A1 - Häcker, Ralf A1 - Klingbeil, Dietmar A1 - Künecke, Georgia A1 - Ohm, Katrin ED - Richard, H. A. T1 - Untersuchungen zur Bewertung des Zähigkeitsverhaltens im Übergangsbereich vom Spaltbruch zum Gleitbruch N2 - Im Hinblick auf das Verhalten von Bauteilen aus ferritischen Stählen im Übergangsbereich vom Gleitbruch zum Spaltbruch wurden in einem vom BMBF geförderten Forschungsvorhaben, über das nachfolgend auszugsweise berichtet wird, u.a. folgende Ziele verfolgt: • Abgrenzung des Anwendungsbereichs der elastisch-plastischen Bruchmechanik zu tiefen Temperaturen hin, • Möglichkeiten und Grenzen der Nutzung von Zähigkeitspotentialen im Übergangsbereich, • Ermittlung des Einflusses des Spannungszustandes auf das Bruchverhalten im Übergangsbereich und • Übertragbarkeit auf Bauteile. T2 - 32. Tagung des DVM-Arbeitskreises Bruchvorgänge CY - Berlin, Germany DA - 22.02.2000 PY - 2000 SN - 0943-3473 SP - 109 EP - 119 PB - DVM CY - Berlin AN - OPUS4-7025 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lietze, Dieter T1 - Versuche mit Acetylen-Leitungen N2 - Die sichere Handhabung des Acetylen bereitet größere Schwierigkeiten als die anderer brennbarer Gase, weil das Acetylen als endotherme Verbindung explosiv in seine Bestandteile Kohlenstoff und Wasserstoff zerfallen kann. Innerhalb acetylenenthaltender Anlagen besteht deshalb auch bei Abwesenheit von Luft bzw. von Sauerstoff die Gefahr, dass sich eine Reaktion, wenn sie einmal eingeleitet wird, durch das ganze acetylenenthaltende System fortpflanzt. PY - 1980 SN - 0007-5868 SN - 0407-9132 VL - 31 IS - 7-8 SP - 39 EP - 42 PB - Kohlhammer CY - Stuttgart AN - OPUS4-9347 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koenen, Heinrich A1 - Ide, Karl-Heinz A1 - Swart, Karl-Heinz T1 - Sicherheitstechnische Kenndaten explosionsfähiger Stoffe - 1. Mitteilung: Prüfverfahren der Bundesanstalt für Materialprüfung (BAM) Berlin-Dahlem N2 - Die Prüfmethoden zur Ermittlung der „explosiven Eigenschaften“ und der Explosionsfähigkeit von Stoffen sind in den letzten Jahren so ergänzt worden, daß es möglich ist, eine Reihe von Eigenschaften in relativen Zahlenwerten auszudrücken. Diese Werte und andere Angaben stellen die sicherheitstechnischen Kenndaten eines Stoffes dar und erlauben die Beurteilung seiner Gefährlichkeit, insbesondere auch für Zwecke des Arbeitsschutzes und der Unfallverhütung bei Herstellung, Verarbeitung, Beförderung, Lagerung und Verwendung. Es ist beabsichtigt, die explosionsfähigen festen und flüssigen Stoffe auf diese Weise tabellarisch zu erfassen, um den in der Industrie und den Aufsichtsbehörden für solche Fragen Verantwortlichen die Möglichkeit in die Hand zu geben, sich über die gefährlichen Eigenschaften eines Stoffes zu informieren. Zunächst werden die hierzu angewandten Prüfmethoden der Bundesanstalt für Materialprüfung beschrieben. Die Tabellen mit den sicherheitstechnischen Kenndaten explosionsfähiger Stoffe folgen in weiteren Mitteilungen. Der Berufsgenossenschaft der chemischen Industrie, Heidelberg, welche diese Arbeiten wesentlich unterstützt und damit erst ermöglicht, sei bereits an dieser Stelle aufrichtig gedankt. PY - 1961 SN - 0014-505X SN - 0014-5068 N1 - Der Artikel wurde ursprünglich in zwei Teilen veröffentlicht: H. 1, S. 4-13 und H. 2, S. 30-42. – The article was originally published in two parts: No. 1, p. 4-13 and no. 2, p. 30-42. VL - 9 IS - Sonderdruck aus Nr. 1 und 2/1961 SP - 3 EP - 23 PB - Barth CY - Neustadt, Weinstr. AN - OPUS4-10141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böllinghaus, Thomas A1 - Hoffmeister, H. T1 - Hydrogen permeation in supermartensitic stainless steels dependent on heat treatment and chemical composition N2 - Hydrogen might cause severe degradation of supermartensitic stainless steels, if they are activated during exposure to sour environments. Consistent and comprehensive data for hydrogen transport in these materials are thus required to support, in particular, modelling of hydrogen assisted cracking as a part of life time assessment of welded steel components. In addition to previously published diffusion coefficients and subsurface concentrations of a supermartensitic stainless steel further data dependent on heat treatment are provided by this contribution. Furthermore, a higher alloyed material has been investigated in the state as received and also in the quenched condition, in order to approach the influences of chemical composition on hydrogen transport in supermartensitic stainless steels. With respect to welding it turned out that the diffusion coefficient and the subsurface concentration are markedly dependent on heat treatment of the materials. T2 - Corrosion 2000 CY - Orlando, FL, USA DA - 2000-03-26 PY - 2000 SP - Paper 00141, 1 EP - 19 PB - NACE International CY - Houston, Tex. AN - OPUS4-11844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas A1 - Florian, Wolfgang A1 - Böllinghaus, Thomas A1 - Herold, H. ED - Miannay, D. P. T1 - Analysis of welding reaction stresses and welding reaction moments in component tests - Stress characteristics dependent on the intensity of restraint N2 - Up to the present, the thermomechanical loads during welding and subsequent cooling under design-specific shrinkage restraint resulting from the interaction between the materials and the structure have often not been taken into consideration approperiately for weldability assessment of components. As compared to previous investigations using small specimens this report presents component weld tests under varying intensities of restraint. Online records of the reaction forces and moments demonstrate in which way the intensity of restraint affects the reaction stresses and moments and their meaning for the evaluation of the load level in welded components. T2 - EUROMAT Topical 2000 CY - Tours, France DA - 07.11.2000 PY - 2000 SN - 0-08-042815-0 VL - 1 SP - 145 EP - 150 PB - Elsevier CY - Amsterdam AN - OPUS4-11847 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schobbert, Helmut A1 - Böllinghaus, Thomas A1 - Schöler, Annett T1 - Heißrißsicherheit hochlegierter austenitischer Stähle beim Laser- und Hybridschweißen N2 - Eine Reihe nichtrostender austenitischer Cr-Ni-Stähle in der Nähe der eutektischen Rinne können beim Laserschweißen sowohl primär ferritisch als auch primär austenitisch erstarren. Speziell konzipierte Heißrißprüfungen zeigen eine Rißanfälligkeit der im Unterschied zum WIG-Schweißen mit großen Streckenenergien beim Laserschweißen mit kleinen Streckenenergien primär austenitisch erstarrenden Gefügebereiche. Die Ursache dafür ist, daß im Unterschied zu einer langsamen primär ferritischen Erstarrung bei einer schnellen Erstarrung über metastabile primär austenitische Zustände Restschmelzen entstehen können, die gegenüber dem Grundwerkstoff erhebliche temperaturabhängige Zähigkeitsverluste aufweisen. Es wird gezeigt, wie sich durch die Wahl auf den Werkstoff gezielt abgestimmter Schweißparameter die Heißrißsicherheit beim Laserschweißen weitestgehend sicherstellen läßt. Darüber hinaus werden Perspektiven vorgestellt, wie die Heißrißsicherheit bei Hybridschweißen durch die Auswahl vom Zusatzwerkstoffen und durch eine geeignete Prozeßführung zu erreichen ist. T2 - 12. Jahrestagung Schadensanalyse CY - Würzburg, Germany DA - 18.10.2000 PY - 2000 SN - 3-18-091556-0 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1556 SP - 225 EP - 240 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-11849 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas A1 - Florian, Wolfgang A1 - Herold, H. T1 - Effect of weld metal strength and welding conditions on reaction forces and stress distribution of restrained components N2 - Düring the past decades, weldability studies have predominantly been concentrated on the material and the welding process. In order to achieve a closer insight into the structural effects, component weldability tests have been performed by online monitoring of the reaction forces and moments. As a particular item, the effects of different strengths of the base and filier material on the reaction force and stress build up transverse to the welding direction have been studied at a specific structural restraint. As a most relevant result for practical welding it is demonstrated that the final reaction force and also the reaction stress level in the multilayer butt welds decreases with overmatch of the weld metal. PY - 2000 IS - IX-1971-00 SP - 1 EP - 18 PB - International Institute of Welding CY - Paris AN - OPUS4-11842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, Eckhard A1 - Schulte, K. T1 - Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" N2 - Die in zunehmenden Maße Mitte der 80er Jahre einsetzende Substitution von metallischen Materialien z. B. durch hochleistungsfähige polymere Werkstoffe und Verbundwerkstoffe wurde u. a. von der DGM zum Anlass genommen, ihre zukünftigen Aufgaben neu zu definieren und gleichzeitig mit der Gründung des Fachausschusses "Gefüge und Eigenschaften von Polymerwerkstoffen" dieser neuen Entwicklung in der Materialkunde auf dem Gebiet der Kunststoffe und ihrer Anwendungen Rechnung zu tragen. KW - Aufgaben KW - Ziele PY - 2004 DO - https://doi.org/10.1515/ijmr-2004-0141 SN - 0044-3093 VL - 95 IS - 9 (85 Jahre DGM) SP - 742 EP - 743 PB - Hanser CY - München AN - OPUS4-5988 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Treumann, Hartwig T1 - Die Zulassung explosionsgefährlicher Stoffe PY - 1977 IS - 7 SP - 158 EP - 164 PB - Nomos Verl.-Ges. CY - Baden-Baden AN - OPUS4-8700 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther T1 - Wirksamkeit gegen Hausbock- und Anobien-Larven von Fluor-Chrom- und Fluor-Chrom-Arsen-Salzgemischen vor und nach Auswaschung T1 - Efficacy of Fluoro-Chromium- and Fluoro-Chromiu-Arsenate Wood Preservatives against Hylotrupes and Anobium Larvae before and after Leaching N2 - Fragestellungen — Versuchsausführung — Erläuterungen zu den Giftwert-Ergebnissen — Der Einfluß von Trocknungsbedingungen auf die Giftwerte — Der Einfluß einer Auswaschung auf die Giftwirkung — Vergleich der Wirksamkeit verschiedenartiger U- und UA-Salzgemische — Zusammenfassung — Schrifttum. PY - 1961 SN - 0018-3768 VL - 19 IS - 1 SP - 482 EP - 489 PB - Springer CY - Berlin AN - OPUS4-10187 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maultzsch, Matthias A1 - Kühne, Hans-Carsten A1 - Meinhold, Uwe A1 - Haamkens, Frank T1 - Entwicklung von Betonen mit geringer Festigkeit für die Beurteilung von Instandsetzungssystemen im Wasserbau N2 - Die Regelwerke (RL SIB, ZTV-ING) setzen für die Instandsetzung mit Betoninstandsetzungssystemen vergleichsweise hochwertige Betonuntergründe voraus. Speziell bei älterenWasserbauwerken sind oftmals nur geringerfeste Betonuntergründe vorhanden für die es bis jetzt keine geeigneten und geprüften Instandsetzungssysteme gab. Grundlage für die Entwicklung solcher Systeme sind entsprechende Referenzbetone als Untergrundbeton für die Verbundkörperprüfung. T2 - Wissenschaftsrat CY - Berlin, Germany DA - 17.01.2006 PY - 2006 AN - OPUS4-12028 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Mellmann, Günter T1 - Abschätzung der Druckfestigkeit von hochfestem Beton mit dem Rückprallhammer N2 - Ziel der Untersuchungen war es, herauszufinden ob die Druckfestigkeit hochfester Betone zerstörungsfrei mit dem Rückprallhammer PROCEQEQUOSCHMIDT durch Ermittlung des klassischen Rückprallwerts R in Kombination, mit einem aus der Untersuchung von Metallen bekannten neuen Messwert L mit ausreichender Sicherheit beschrieben werden kann. T2 - Wissenschaftsrat CY - Berlin, Germany DA - 17.02.2006 PY - 2006 AN - OPUS4-12029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Falzverlust und Widerstand gegen Zerknittern und Reiben PY - 1899 VL - 17 IS - 6 SP - 269 EP - 274 PB - Springer CY - Berlin AN - OPUS4-13115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herzberg, Wilhelm T1 - Kleine Mittheilungen - Zeitungsdruckpapier PY - 1898 VL - 16 IS - 1 SP - 87 EP - 88 PB - Springer CY - Berlin AN - OPUS4-13074 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heap, M.J. A1 - Lavallée, Y. A1 - Laumann, A. A1 - Hess, K.-U. A1 - Meredith, P.G. A1 - Dingwell, D.B. A1 - Huismann, Sven A1 - Weise, Frank T1 - The influence of thermal-stressing (up to 1000 °C) on the physical, mechanical, and chemical properties of siliceous-aggregate, high-strength concrete N2 - High-strength concrete (HSC) will experience thermal microcracking, explosive spalling, and undesirable chemical changes when exposed to high temperatures, such as during fire, engulfment by lava flow, or nuclear meltdown. Knowledge of the resultant changes in mechanical, physical, and chemical properties is paramount for hazard mitigation. We present a multidisciplinary study on the influence of thermal-stressing on HSC. Our study shows that thermal microcracking in HSC initiates at 180 °C, is more prevalent during cooling, and exhibits the Kaiser 'temperature-memory' effect. We show that residual compressive strength, indirect tensile strength, ultrasonic wave velocities, and Young’s modulus and Poisson’s ratio decrease, whilst porosity and permeability increase with increasing temperature. We discuss these data in terms of the chemical changes during thermal-stressing, provided by thermo-gravimetric analysis, differential scanning calorimetry, and X-ray diffraction, and from optical microscopic analysis of thermally-stressed samples. We provide implications for thermally-damaged HSC structures and a new method for non-destructive monitoring. KW - High strength concrete KW - Fire KW - Thermal-stressing KW - Acoustic emissions KW - Physical properties KW - Elastic moduli KW - Uniaxial compressive strength KW - Indirect tensile strength KW - Thermo-gravimetric analysis KW - X-ray diffraction PY - 2013 DO - https://doi.org/10.1016/j.conbuildmat.2013.01.020 SN - 0950-0618 VL - 42 SP - 248 EP - 265 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-27992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pfennig, A. A1 - Zastrow, Philip A1 - Kranzmann, Axel T1 - Influence of heat treatment on the corrosion behaviour of stainless steels during CO2-sequestration into saline aquifer N2 - The appropriate strength of steels used for saline aquifer carbon capture and storage sites (CCS) is usually achieved by applying heat treatments. Thus, heat treatment influences the corrosion resistance for injection pipe steels with 13% chromium and different carbon content: 1.4034/X46Cr13 and 1.4021/X20Cr13 in CO2 saturated saline aquifer water at 60 °C, 1 and 100 bar. X46Cr13 shows better corrosion resistance with respect to corrosion rate, number of pits and maximum intrusion depth. Low corrosion rates are obtained for steels with martensitic microstructures exposed to supercritical CO2 at 100 bar, whereas normalized steels show better corrosion resistance at ambient pressure. KW - Steel KW - Heat treatment KW - CO2 injection KW - Carbon capture and storage (CCS) KW - Corrosion PY - 2013 DO - https://doi.org/10.1016/j.ijggc.2013.02.016 SN - 1750-5836 VL - 15 SP - 213 EP - 224 PB - Elsevier Ltd. CY - New York, NY [u.a.] AN - OPUS4-27994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kasch, Thomas A1 - Binder, Christian A1 - Brock, Thomas A1 - Hesse, Olaf A1 - Treisch, Nico T1 - Sind Berstscheiben in Anlagen für hochverdichteten Sauerstoff ein Sicherheitsrisiko? N2 - Armaturen und Anlagenteile für Hochdruck-Sauerstoff enthalten meistens nichtmetallische Materialen als Sitz- und Dichtungswerkstoffe. Die Gefahr eines Ausbrands dieser Armaturen; ist grundsätzlich vorhanden, jedoch relativ gering, wenn neben dem richtigen Design geeignete metallische und nichtmetallische Materialien für die vorgesehenen Betriebsbedingungen von Druck und Temperatur gewählt werden. Aus sicherheitstechnischer Sicht sollte daher für Armaturen und Anlagenteile, die komplett aus Metall gefertigt und metallisch abgedichtet werden, eine noch geringere Gefahr eines Ausbrands bestehen. Während einer Versuchsreihe auf dem BAM-TTS- Frei Versuchsgelände mit Hochdruck-Sauerstoff brannte jedoch unerwartet ein solches - rein metallisches Anlagenteil - komplett ab. Bei diesen Versuchen platzt eine metallische Membran wie eine Berstscheibe bei einem bestimmten Sauerstoffdruck auf. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Sauerstoff KW - Aluminium KW - Berstscheibe KW - Brandgefahr KW - Zündursache KW - Unfallanalyse PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 8 AN - OPUS4-27996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Ünal, Murat ED - Raupach, M. T1 - Modulare Ersatzmassen zur Reprofilierung denkmalgeschützter Natursteinbauwerke N2 - Weltweit besteht einen hoher, stetig wachsender Bedarf an Natursteininstandsetzung im Bereich des denkmalgeschützten Kulturguts. Das Ausbessem beschädigter Elemente mit sogenannten Steinersatzmassen ist dabei eine etablierte Technik. Hierfür werden Mörtel unterschiedlichster Zusammensetzung verwendet. Die Schwierigkeit für den Restaurator liegt in der Wahl, bzw. der Verfügbarkeit des optimalen Produkts, um im individuellen Fall sowohl den mechanischen und bauphysikalischen Anforderungen als auch den gestalterischen und denkmalpflegerischen Belangen gerecht zu werden. Anhand der im Beitrag an Fallbeispielen erläuterten häufig auftretenden Probleme und der daraus abgeleiteten Anforderungen an Natursteininstandsetzung, lässt sich die Komplexität dieser Aufgabe erkennen. An der BAM wird derzeit im Rahmen eines Forschungsprojekts ein modulares Steinersatzsystem entwickelt. Ziel der Entwicklung ist es dem Restaurator die größtmögliche Freiheit in der Anpassung des Mörtels an die Originalsubstanz zu geben. Erste Ergebnisse aus Parameterstudien zur Bindemittel- und Sandvariation sowie zu Polymermodifikationen werden vorgestellt. T2 - 3. Kolloquium Erhaltung von Bauwerken CY - Ostfildern, Germany DA - 22.01.2013 PY - 2013 SN - 978-3-943563-03-0 SP - 333 EP - 349 CY - Ostfildern AN - OPUS4-28000 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Seifert, Alexander A1 - Böhme, Thilo A1 - Wehrstedt, Klaus-Dieter A1 - Bulin, Michael T1 - Aufnahme sicherheitstechnischer Kenngrößen von Stäuben in den Gemeinsamen Stoffdatenpool Bund/Länder - Gruppierung vorhandener Daten und Ableiten bewerteter Bandbreiten N2 - Staubexplosionen können in nahezu allen Branchen auftreten, in denen brennbare Schüttgüter und Stäube gehandhabt werden oder entstehen können, vor allem dort, wo Stäube in aufgewirbelter Form vorkommen. Abgelagerte Stäube können bei starker Erwärmung zur Entzündung gelangen. Die Beurteilung daraus entstehender Gefahren und das Auslegen von vorbeugenden und konstruktiven Schutzmaßnahmen erfolgt über sog. sicherheitstechnische Kenngrößen (STK). Im Rahmen eines vom Bundesland Sachsen geförderten Projekts sind von der Bundesanstalt für Materialforschung und -prüfung (BAM) STK brennbarer Stäube zu Staubgruppen zusammengefasst und in den Gemeinsamen Stoffdatenpool Bund/Länder (GSBL) integriert worden. Grundlage für die Staubgruppen waren zahlreiche Datensätze, die in der Datenbank GESTIS-STAUB-EX des Instituts für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung (IFA) veröffentlich sind. Angegeben werden allerdings nicht mehr die dort enthaltenen Kenngrößen einzelner Stäube, sondern Bandbreiten, innerhalb derer sich die STK der in den Staubgruppen zusammengefassten Stäube bewegen können. Je nach Datenlage wurden die sicherheitsrelevanten Grenzen dieser Bandbreiten mit einem Ranking versehen. KW - Sicherheitstechnische Kenngrößen KW - Stäube KW - Staubexplosionen KW - Datenbank PY - 2013 SN - 2191-0073 VL - 3 IS - 4 SP - 10 EP - 14 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-28064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schempp, Philipp A1 - Cross, C.E. A1 - Häcker, Ralf A1 - Pittner, Andreas A1 - Rethmeier, Michael T1 - Influence of grain size on mechanical properties of aluminium GTA weld metal N2 - Grain refinement is an important possibility to enhance the mechanical properties such as strength, ductility and toughness of aluminium weld metal. In this study, grain refinement was achieved through the addition of commercial grain refiner Al Ti5B1 to gas tungsten arc weld metal of the aluminium alloys 1050A (Al 99.5) and 5083 (Al Mg4.5Mn0.7). The grain refiner additions led to a significant reduction of the weld metal mean grain size (Alloy 1050A, 86 %; Alloy 5083, 44 %) with a change in grain shape from columnar to equiaxed. Tensile tests showed for Alloy 5083 that the weld metal's ductility can be increased through grain refinement. No improvement in weld metal strength (i.e. yield strength and ultimate tensile strength) was observed. Furthermore, tear tests with notched specimens revealed that the resistance against initiation and propagation of cracks in the weld metal can be enhanced through grain refinement. The toughness was observed to increase clearly by grain refinement in weld metal of commercial pure Al (Alloy 1050A). In Alloy 5083 weld metal, the toughness was not improved through grain refinement, likely because of a semi-continuous network of brittle intermetallic phases that facilitate crack propagation. KW - GTA welding KW - Aluminium KW - Grain size KW - Tensile tests KW - Dynamic fracture tests PY - 2013 DO - https://doi.org/10.1007/s40194-013-0026-6 SN - 0043-2288 SN - 1878-6669 VL - 57 IS - 3 SP - 293 EP - 304 PB - Springer CY - Oxford AN - OPUS4-28065 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bergmann, A. A1 - Grosser, H. A1 - Graf, B. A1 - Uhlmann, E. A1 - Rethmeier, Michael A1 - Stark, R. T1 - Additive Prozesskette zur Instandsetzung von Bauteilen - Aufbau, Reparatur und Modellbildung N2 - Komplexe Bauteile ohne Fügestellen sind die Spezialität additiver Verfahren. Immer deutlicher wird der Wert dieser Technologie für den Turbomaschinenbau, etwa bei der Fertigung von Turbinenschaufeln mit inneren Kühlstrukturen. Wichtig für vorbildgetreue Turbinenkomponenten: Die Technologie ermöglicht die Fertigung von Freiformen und Hinterschnitten, von außen- und innenliegenden filigranen, komplexen Strukturen als Einzelteil - und das in einem einzigen Arbeitsschritt. Des Weiteren benötigen additive Verfahren keine formgebenden Werkzeuge und weisen demnach kürzere Prozessketten im Vergleich zu konventionellen Herstellungsverfahren auf. Wirtschaftliche Vorteile kommen vor allem bei kleinen Losgrößen und Bauteilabmessungen zur Geltung. In diesem Artikel werden am Beispiel einer Turbinenschaufel Schlüsseltechnologien einer additiven Prozesskette gezeigt. Zunächst erfolgt die additive Fertigung einer Turbinenschaufel mittels Selective Laser Melting (SLM). Das Verfahren ermöglicht die Integration innenliegender Kühlkanäle. An dieser Schaufel wird anschließend mittels Laser-PulverAuftragschweißen (LPA) die Reparatur unterschiedlicher Beschädigungen demonstriert. Im nächsten Schritt der Prozesskette bietet ein optischer 3D-Scan der Schaufel die Möglichkeit zur Qualitätskontrolle und zum Vergleich der Bauteilabmessungen mit der Sollgeometrie. PY - 2013 DO - https://doi.org/10.1002/latj.201390021 SN - 1613-7728 SN - 1863-9119 VL - 10 IS - 2 SP - 31 EP - 35 PB - Wiley-VCH CY - Weinheim AN - OPUS4-28066 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marin, L. A1 - Döhler, Michael A1 - Bernal, D. A1 - Mevel, L. T1 - Robust statistical damage localization with stochastic load vectors N2 - The stochastic dynamic damage locating vector approach is a vibration-based damage localization method based on a finite element model of a structure and output-only measurements in both reference and damaged states. A stress field is computed for loads in the null space of a surrogate of the change in the transfer matrix at the sensor positions for some values in the Laplace domain. Then, the damage location is related to positions where the stress is close to zero. Robustness of the localization information can be achieved by aggregating results at different values in the Laplace domain. So far, this approach, and in particular the aggregation, is deterministic and does not take the uncertainty in the stress estimates into account. In this paper, the damage localization method is extended with a statistical framework. The uncertainty in the output-only measurements is propagated to the stress estimates at different values of the Laplace variable, and these estimates are aggregated based on statistical principles. The performance of the new statistical approach is demonstrated both in a numerical application and a lab experiment, showing a significant improvement of the robustness of the method due to the statistical evaluation of the localization information. KW - Damage localization KW - Load vectors KW - Ambient vibration KW - Covariance analysis KW - Subspace methods PY - 2015 UR - http://onlinelibrary.wiley.com/doi/10.1002/stc.1686/full DO - https://doi.org/10.1002/stc.1686 SN - 1545-2255 SN - 1545-2263 VL - 22 IS - 3 SP - 557 EP - 573 PB - Wiley CY - Chichester AN - OPUS4-28069 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wilke, Olaf A1 - Borzowski, F. A1 - Wiegner, Katharina A1 - Brauer, F. T1 - Bestimmung der VOC-Emissionen aus Grobspanplatten (OSB-Platten) und ihre Bewertung nach dem AgBB-Schema N2 - In den letzten Jahren ist der Markt für Grobspanplatten (engl.: Oriented Strand Boards, OSB) zum Einsatz beim Hausbau gewachsen. Die Platten werden in Deutschland und Europa hauptsächlich aus Kiefernholz hergestellt und finden Verwendung in Bodenbelägen, Decken und Wänden. Durch ihren Einsatz kann es zu gesundheitlichen Beschwerden, wie Geruchsbelästigungen oder Schleimhautreizungen, kommen. Die Bundesanstalt für Materialforschung und -prüfung (BAM) hat im Auftrag des Umweltbundesamtes (UBA) ein Forschungsvorhaben zu Emissionen aus Holz und Holzwerkstoffen durchgeführt. In Emissionsprüfkammern wurden unter anderem Proben von sechs OSB-Platten aus Baumärkten untersucht und ihre VOC-Emissionen (engl.: Volatile Organic Compounds, VOC) gemessen. Vier dieser Platten von drei verschiedenen Herstellern würden die Anforderungen des Ausschusses zur gesundheitlichen Bewertung von Bauprodukten (AgBB) nicht einhalten. Größtes Problem hierbei sind die ungesättigten Aldehyde. Der Einsatz von Antioxidantien während der Produktion kann helfen, ungewollte Emissionen deutlich zu reduzieren. KW - Holz KW - VOC-Emissionen KW - AgBB-Schema KW - OSB-Platten PY - 2013 SN - 2190-1120 SN - 2190-1147 VL - 1 SP - 5 EP - 11 PB - BfS CY - Berlin AN - OPUS4-28071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Syed, A.A. A1 - Pittner, Andreas A1 - Rethmeier, Michael A1 - De, A. T1 - Modeling of gas metal arc welding process using an analytically determined volumetric heat source N2 - High peak temperature and continuous deposition of electrode droplets in the weld puddle inhibit real-time monitoring of thermal cycles and bead dimensions in gas metal arc welding. A three-dimensional numerical heat transfer model is presented here to compute temperature field and bead dimensions considering a volumetric heat source to account for the transfer of arc energy into the weld pool. The heat source dimensions are analytically estimated as function of welding conditions and original joint geometry. The deposition of electrode material is modeled using deactivation and activation of discrete elements in a presumed V-groove joint geometry. The computed values of bead dimensions and thermal cycles are validated with the corresponding measured results. A comparison of the analytically estimated heat source dimensions and the corresponding numerically computed bead dimensions indicate that the former could rightly serve as the basis for conduction heat transfer based models of gas metal arc welding process. KW - Gas metal arc welding KW - Heat conduction KW - Volumetric heat source KW - Experimental validation PY - 2013 DO - https://doi.org/10.2355/isijinternational.53.698 SN - 0915-1559 SN - 1347-5460 VL - 53 IS - 4 SP - 698 EP - 703 PB - ISIJ AN - OPUS4-28074 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hättig, J. A1 - Bräuer, W. A1 - Pretsch, Thorsten T1 - Ein Kunststoff, der sich erinnert - Einsatzchancen von thermoplastischem Polyurethan mit Formgedächtnis N2 - Ein neu entwickeltes thermoplastisches Polyurethan (TPU) ist alles andere als „vergesslich". Formteile aus dem Material lassen sich in einer temporären Form fixieren und wieder nahezu in ihre ursprüngliche Gestalt zurückverwandeln. Dieser Formgedächtniseffekt hat gute Anwendungschancen - vom Marken- und Produktschutz über den Maschinen- und Automobilbau, bis hin zur Freizeit- und Spielzeugindustrie. KW - Thermoplastisches Polyurethan (TPU) KW - Desmopan DP 2795A SMP KW - Formgdächtnispolymer KW - Shape memory polymer KW - Smarte Etiketten KW - Schaltbare Etiketten KW - Produkt und Markenschutz KW - Smartphone KW - QR code KW - Färbeverfahren KW - Guest diffusion KW - TPU Folie KW - Selbst-aufrichtende Treibhäuser KW - Folientunnel PY - 2013 SN - 0344-4570 VL - 4 SP - 92 EP - 94 PB - Vereinigte Fachverl. CY - Mainz AN - OPUS4-28081 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Favet, J. A1 - Lapanje, A. A1 - Giongo, A. A1 - Kennedy, S. A1 - Aung, Y.-Y. A1 - Cattaneo, A. A1 - Davis-Richardson, A.G. A1 - Brown, C.T. A1 - Kort, R. A1 - Brumsack, H.-J. A1 - Schnetger, B. A1 - Chappell, A. A1 - Kroijenga, J. A1 - Beck, A. A1 - Schwibbert, Karin A1 - Mohamed, A.H. A1 - Kirchner, T. A1 - Dorr de Quadros, P. A1 - Triplett, E.W. A1 - Broughton, William J. A1 - Gorbushina, Anna T1 - Microbial hitchhikers on intercontinental dust: catching a lift in Chad N2 - Ancient mariners knew that dust whipped up from deserts by strong winds travelled long distances, including over oceans. Satellite remote sensing revealed major dust sources across the Sahara. Indeed, the Bodélé Depression in the Republic of Chad has been called the dustiest place on earth. We analysed desert sand from various locations in Chad and dust that had blown to the Cape Verde Islands. High throughput sequencing techniques combined with classical microbiological methods showed that the samples contained a large variety of microbes well adapted to the harsh desert conditions. The most abundant bacterial groupings in four different phyla included: (a) Firmicutes—Bacillaceae, (b) Actinobacteria—Geodermatophilaceae, Nocardiodaceae and Solirubrobacteraceae, (c) Proteobacteria—Oxalobacteraceae, Rhizobiales and Sphingomonadaceae, and (d) Bacteroidetes—Cytophagaceae. Ascomycota was the overwhelmingly dominant fungal group followed by Basidiomycota and traces of Chytridiomycota, Microsporidia and Glomeromycota. Two freshwater algae (Trebouxiophyceae) were isolated. Most predominant taxa are widely distributed land inhabitants that are common in soil and on the surfaces of plants. Examples include Bradyrhizobium spp. that nodulate and fix nitrogen in Acacia species, the predominant trees of the Sahara as well as Herbaspirillum (Oxalobacteraceae), a group of chemoorganotrophic free-living soil inhabitants that fix nitrogen in association with Gramineae roots. Few pathogenic strains were found, suggesting that African dust is not a large threat to public health. KW - Aeolian KW - High throughput sequencing KW - Bodélé Depression KW - Republic of Chad KW - Wind erosion PY - 2013 DO - https://doi.org/10.1038/ismej.2012.152 SN - 1751-7362 SN - 1751-7370 VL - 7 SP - 850 EP - 867 PB - Nature Publishing Group CY - Basingstoke AN - OPUS4-28083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rethmeier, Michael A1 - Gook, Sergej A1 - Gumenyuk, Andrey ED - Turichin, G. T1 - Prospects of application of laser-GMA hybrid welding for manufacturing of large diameter longitudinal welded high strength steel pipes T2 - VII. International scientific and technical conference 'Beam technologies & laser application' CY - Saint-Petersburg, Russia DA - 2012-09-18 KW - High strength steel KW - Laser hybrid welding KW - Modified spray arc KW - Longitudinal weld KW - Pipeline PY - 2013 SP - 130 EP - 140 PB - Publishing house SPbSPU AN - OPUS4-28040 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H.R. A1 - Weidner, Steffen T1 - Copolyesters of lactide, isosorbide, and terephthalic acid-biobased, biodegradable, high-Tg engineering plastics N2 - Various copolyesters of lactide, isosorbide, and terephthalic acid are prepared by a two-step process performed in a 'one-pot' procedure, beginning with an isosorbide-initiated oligomerization of L-lactide followed by polycondensation with terephthaloyl chloride using SnCl2 as a catalyst for both steps. The SEC data show the formation of random copolyesters with high polydispersities as a consequence of the relatively high fraction of cyclics proved by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). The glass-transition temperatures (89–180 °C) obey an almost linear trend with the molar composition. The thermostability decreases with increasing lactide content. The successful incorporation of phenyl phosphate results in copolyesters of lower inflammability. KW - Biodegradability KW - Cyclization KW - Isosorbide KW - Polycondensation KW - Ring-opening polymerization PY - 2013 DO - https://doi.org/10.1002/macp.201200612 SN - 1022-1352 SN - 1521-3935 VL - 214 IS - 6 SP - 726 EP - 733 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-28171 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Woydt, Mathias T1 - Tribologie des céramiques N2 - Les ceramiques modernes sont differentes des ceramiques traditionnelles (carrelage, materiaux de construction, porcelaine); on les distingue par des adjectifs tels que « techniques », « industrielles » ou « thermomecaniques ». Les ceramiques industrielles sont caracterisees par leur caractere refractaire marque et de grandes duretes. Leur mediocre tenacite explique leur sensibilite ä la presence de defauts, d'oü leur reputation d'etre peu resistantes et cassantes. Les ceramiques techniques sont utilisees pour: • leurs proprietes electriques ou dielectriques; • leurs proprietes magnetiques et de supraconducteurs ; • leurs proprietes optiques; • leurs proprietes chimiques; • leurs proprietes biologiques; • leurs proprietes nucleaires. En outre, eiles sont employees pour leurs proprietes mecaniques, thermomecaniques et tribologiques, ainsi que pour leur tenue face ä la corrosion. Nous allons nous concentrer sur leur comportement tribologique. PY - 2013 N1 - Serientitel: Les sélections - Techniques de l'ingénieur – Series title: Les sélections - Techniques de l'ingénieur SP - TRI 4 550-1 EP - TRI 4 550-14 CY - Paris AN - OPUS4-28146 LA - fra AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schneider, André A1 - Avilov, Vjaceslav A1 - Gumenyuk, Andrey A1 - Rethmeier, Michael T1 - Laser beam welding of aluminium alloys under the influence of an electromagnetic field N2 - During laser beam welding of aluminum alloys an electromagnetic field may favour pore outgassing through the top oxide layer. High frequencies cause a small penetration depth and thus exert a stabilizing effect on the weld surface. The point at which the laser beam between the two magnetic poles hits the workpiece surface is crucial to the influence of the magnetic field on the weld surface roughness. Using analyzed parameters for different laser points of application cause a change in weld surface roughness could be observed. The weld surface roughness could be reduced by 50%. The outgassing effect in terms of a reduction of pores could be observed for all parameter sets investigated. T2 - Lasers in manufacturing conference 2013 CY - Munich, Germany DA - 13.05.2013 KW - Electromagnetically controlled laser beam welding KW - Surface roughness KW - Porosity prevention KW - Aluminium alloys PY - 2013 DO - https://doi.org/10.1016/j.phpro.2013.03.045 SN - 1875-3892 VL - 41 SP - 4 EP - 11 PB - Elsevier B.V. CY - Amsterdam [u.a.] AN - OPUS4-28147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pentzien, Simone A1 - Rabin, Ira A1 - Hahn, Oliver A1 - Krüger, Jörg A1 - Kleber, F. A1 - Hollaus, F. A1 - Diem, M. A1 - Sablatnig, R. ED - Park, J.-I. ED - Kim, J. T1 - Can Modern Technologies Defeat Nazi Censorship? N2 - Censorship of parts of written text was and is a common practice in totalitarian regimes. It is used to destroy information not approved by the political power. Recovering the censored text is of interest for historical studies of the text. This paper raises the question, whether a censored postcard from 1942 can be made legible by applying multispectral imaging in combination with laser cleaning. In the fields of art conservation (e.g. color measurements), investigation (e.g. Analysis of underdrawings in paintings), and historical document analysis, multispectral imaging techniques have been applied successfully to give visibility to information hidden to the human eye. The basic principle of laser cleaning is to transfer laser pulse energy to a contamination layer by an absorption process that leads to heating and evaporation of the layer. Partial laser cleaning of postcards is possible; dirt on the surface can be removed and the obscured pictures and writings made visible again. We applied both techniques to the postcard. The text could not be restored since the original ink seems to have suffered severe chemical damage. T2 - ACCV 2012 Workshops, 11th Asian conference on computer vision CY - Daejeon, Korea DA - 05.11.2012 KW - Laser cleaning KW - Multispectral imaging KW - Image restoration KW - Image enhancement PY - 2013 SN - 978-3-642-37483-8 SN - 0302-9743 VL - II IS - LNCS 7729 SP - 13 EP - 24 PB - Springer CY - Berlin Heidelberg AN - OPUS4-28160 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Köppen, Robert A1 - Bremser, Wolfram A1 - Rasenko, Tatjana A1 - Koch, Matthias T1 - Development and certification of a reference material for Fusarium mycotoxins in wheat flour N2 - Deoxynivalenol (DON), nivalenol (NIV) and zearalenone (ZEN) are toxic secondary metabolites produced by several species of Fusarium fungi. These mycotoxins are often found together in a large variety of cereal-based foods, which are regulated by maximum content levels of DON and ZEN. To date, suitable certified reference materials (CRM) intended for quality control purposes are lacking for these Fusarium mycotoxins. In order to overcome this lack, the first CRM for the determination of DON, NIV and ZEN in naturally contaminated wheat flour (ERM®-BC600) was developed in the framework of a European Reference Materials (ERM®) project. This article describes and discusses the whole process of ERM®-BC600 development, including material preparation, homogeneity and stability studies, and an interlaboratory comparison study for certification. A total of 21 selected expert laboratories from different European countries with documented expertise in the field of mycotoxin analysis took part in the certification study using various gas and liquid chromatographic methods. The certified values and their corresponding expanded uncertainties (k=2) were assigned in full compliance with the requirements of ISO Guide 35 and are as follows: 102±11 µgkg-1 for DON, 1000±130 µgkg-1 for NIV and 90±8 µgkg-1 for ZEN. KW - Deoxynivalenol KW - Nivalenol KW - Zearalenone KW - Food KW - ERM KW - Quality assurance PY - 2013 DO - https://doi.org/10.1007/s00216-013-6857-6 SN - 1618-2642 SN - 1618-2650 VL - 405 IS - 14 SP - 4755 EP - 4763 PB - Springer CY - Berlin AN - OPUS4-28303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mann, Guido A1 - Pentzien, Simone A1 - Krüger, Jörg T1 - Beam diameter dependence of surface damage threshold of fused silica fibers and preforms for nanosecond laser treatment at 1064 nm wavelength N2 - Optical fibers made of fused silica are a common method of transmitting high laser pulse energies. Failure of those fibers is a significant risk. The determination of laser-induced damage thresholds (LIDT) on fiber end facets according to ISO 21254 standard is needed. In the past, single pulse nanosecond laser experiments showed an improvement of LIDT with increasing fiber core diameter for 1064 nm wavelength and a constant beam diameter of 50 µm. This paper pays particular attention to the influence of the laser beam diameter on damage resistance. All-silica fiber types (LEONI) with different core diameters (100–600 µm) were investigated using beam diameters in a range from 30 µm to 100 µm. For comparison experiments on fused silica preform material (Heraeus F300) were performed. On one hand, surface LIDT of fused silica preform material decreases significantly with increasing beam size. A model considering a random distribution of point defects explains the experimental data qualitatively. On the other hand, LIDT of fiber end facets stays constant. White light microscopy results suggest that the point defect density on fiber end facets is lower compared to the preform surface due to an excellent surface polish quality. KW - Laser-induced damage threshold KW - Nanosecond laser KW - Optical fiber KW - Fused silica KW - Spot size KW - Defect model PY - 2013 DO - https://doi.org/10.1016/j.apsusc.2013.03.088 SN - 0169-4332 SN - 1873-5584 VL - 276 SP - 312 EP - 316 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-28310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lenke, Karoline A1 - Schmidt, R. A1 - Märtin, J. A1 - Hoffmann, G. A1 - Cherif, C. T1 - Simulation of the yarn transportation dynamics in a warp knitting machine N2 - To date, in the textile manufacturing process of warp knitting, trouble-shooting and process optimization mainly rely on empirical knowledge and experiments. This factor limits the achievable increase in productivity and quality. On the other hand, using simulations, different phenomena that affect the quality of the knitted fabric and the knitting process can be clarified in the run-up of the experiments. Consequently, an increase in quality and flexibility can be reached with reduced experimental effort. This paper presents a process simulation of the warp thread dynamics in the thread feeding system of a warp knitting machine. For this purpose, a continuum model of the warp thread that includes the spatial dynamics of the thread and the axial transport movement has been developed. KW - Simulation of yarn transportation KW - Yarn transportation model KW - Warp knitting machine KW - Continuum model KW - Process optimization KW - Knitting PY - 2013 DO - https://doi.org/10.1177/0040517512470197 SN - 0040-5175 N1 - Geburtsname von Lenke, Karoline: Metzkes, K. - Birth name of Lenke, Karoline: Metzkes, K. VL - 83 IS - 12 SP - 1251 EP - 1262 PB - Sage Publ. CY - London AN - OPUS4-28381 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konersmann, Rainer A1 - Würsig, Andreas T1 - Leckgrößen bei Unfällen mit Eisenbahnkesselwagen N2 - Die Dichtheit von Gehäusen, Gefäßen, Rohrleitungen und Behältern ist ein altes Problem der Technik. Die Erfahrung lehrt, dass eigentlich nichts wirklich dicht ist. Darum steht die Leckrate im Fokus der Techniker. Ist sie kontrollierbar gering, besteht meist kein Anlass zur Sorge, ist sie stetig wachsend, müssen Inspektionen und Reparaturen anberaumt werden. Wenn eine Leckage plötzlich und unerwartet auftritt, endet dies meist in einer Katastrophe. Für stationäre Anlagen sind Annahmen getroffen worden, mit denen eine ausreichende Gefährdungsabschätzung vorgenommen werden kann, um z. B. Sicherheitsabstände festzulegen. Dadurch können die Folgen einer Stofffreisetzung in den meisten Fällen gemindert werden. Der Beitrag geht dieser Frage beim Transport von Gefahrgütern, z. B. mit Eisenbahnkesselwagen, nach. KW - Risiko Gefahrguttransport KW - Eisenbahnkesselwagen KW - Leckgrößen KW - Unfallmechanik PY - 2013 SN - 2191-0073 VL - 3 IS - 5 SP - 35 EP - 40 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-28514 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc A1 - Kusche, Christian A1 - Schröder, Volkmar A1 - Barth, Uli ED - Pierucci, S. ED - Klemes, J.J. ED - De Rademaeker, E. ED - Fabiano, B. ED - Buratti, S.S. T1 - Tests on suitability of the ignition source 'exploding wire' for the determination of explosion characteristics of combustible dusts in the 20-L-sphere N2 - According to international standards several safety characteristics of dusts are determined in the 20-Lsphere (also known as SIWEK Chamber). Dust cloud ignition is carried out using pyrotechnical igniters. Due to various disadvantages of such igniters the need for alternative ignition sources arises again and again. An alternative ignition source could be the so called 'exploding wire' or 'fuse wire'. The paper presents test results of a comparative study between both ignition sources for the determination of the safety characteristics Maximum Explosion Pressure and Maximum Explosion Pressure Rise of five selected dusts in the 20-L-sphere. In addition to that the ignition mechanisms of both ignition sources were analysed by high speed camera recordings and the ignition energy was determined with electric and calorimetric recordings. T2 - 14th International symposium on loss prevention and safety promotion in the process industries CY - Florence, Italy DA - 12.05.2013 KW - Sicherheitstechnische Kenngrößen Staub KW - Staubexplosionsschutz KW - Explodierender Draht KW - Alternative Zündquelle PY - 2013 SN - 978-88-95608-22-8 DO - https://doi.org/10.3303/CET1331118 SN - 1974-9791 N1 - Serientitel: Chemical engineering transactions – Series title: Chemical engineering transactions IS - 31 SP - 703 EP - 708 PB - AIDIC, Associazione Italiana di Ingegneria Chimica CY - Milano AN - OPUS4-28554 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Gothe, C. A1 - Scheid, Marc A1 - Krause, U. ED - Makhviladze, G. ED - Molkov, V. ED - Bradley, D. ED - Sunderland, P. ED - Tamanini, F. T1 - Determination of explosion behaviour of nano powders with modified 20-L-sphere test N2 - This paper describes a modified experimental setup for the test apparatus 20-L-Sphere (also known as 20-L Siwek Chamber), that enables the test samples to be kept under inert atmospheric conditions nearly until ignition. This setup was designed to allow the determination of safety characteristics of nano powders under most critical circumstances (e.g. minimisation of the influence of oxidation before the test itself). The aim of this modification was to determine, whether or not the current setup and procedures underestimate the explosion violence and ignitability of nano powders. For this purpose, two different methods, the so called inerting method and the modified method (using a special nozzle called mushroom nozzle) are used. Both methods are described in the paper. The work includes experimental results of micrometer dusts to validate the modified method. Moreover first results of nanometer iron and aluminium dusts are presented, which were kept at inert conditions until shortly before the ignition. The tested nano iron was found to react pyrophoric, as soon as it gets in contact with air, while the tested nano aluminium did not generally show such behaviour. Tests with nano aluminium using the inerting method revealed a higher pressure rise in comparison to the standard test procedure. This could suggest a different extent of passivation. To investigate this effect more closely, further testes with more nano powders are required. T2 - ISFEH7 - 7th International seminar on fire & explosion hazards CY - Providence, RI, USA DA - 05.05.2013 KW - Nano material KW - Dust explosion KW - Safety characteristics KW - Nanopowder PY - 2013 SN - 978-981-07-5936-0 SN - 978-981-07-5940-7 DO - https://doi.org/10.3850/978-981-07-5936-0_13-03 SP - 801 EP - 809 PB - Research publishing AN - OPUS4-28560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Romahn, T.-M. A1 - Scheid, Marc A1 - Krause, U. ED - Pierucci, S. ED - Klemes, J.J. ED - De Rademaeker, E. ED - Fabiano, B. ED - Buratti, S.S. T1 - Modified setup of 20-L-sphere for the determination of safety characteristics of nano powders N2 - This paper describes a modified experimental setup for the test apparatus 20-L-Sphere (also known as 20-L Siwek Chamber), that enables the test samples to be kept under inert atmospheric conditions nearly until ignition. This setup was designed to allow the determination of safety characteristics of nanopowders under most critical circumstances (e.g. minimisation of the influence of oxidation before the test itself). The aim of this modification was to determine, whether or not the current setup and procedures underestimate the explosion violence and ignitability of nanopowders. The work includes experimental results of micrometer dusts to validate the modified setup. Moreover first results of nanometer iron and Aluminium dusts are presented, which were kept at inert conditions until shortly before the ignition. The tested nano iron was found to react pyrophoric, as soon as it gets in contact with air, while the tested nano Aluminium did not generally show such behaviour. T2 - 14th International symposium on loss prevention and safety promotion in the process industries CY - Florence, Italy DA - 12.05.2013 KW - Dust explosion KW - Nanopowder PY - 2013 SN - 978-88-95608-22-8 DO - https://doi.org/10.3303/CET1331135 SN - 1974-9791 N1 - Serientitel: Chemical engineering transactions – Series title: Chemical engineering transactions IS - 31 SP - 805 EP - 810 PB - AIDIC, Associazione Italiana di Ingegneria Chimica CY - Milano AN - OPUS4-28561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogl, Jochen T1 - Advances in isotope ratio mass spectrometry and required isotope reference materials N2 - The article gives a condensed version of the keynote lecture held at the International Mass Spectrometry Conference 2012 in Kyoto. Starting with some examples for isotope research the key requirements for metrologically valid procedures enabling traceable and comparable isotope data are discussed. Of course multi-collector mass spectrometers are required which offer sufficiently high isotope ratio precision for the intended research work. Following this, corrections for mass fractionation/discrimination, validation of the analytical procedure including chemical sample preparation and complete uncertainty budgets are the most important issues for obtaining a metrologically valid procedure for isotope ratio determination. Only the application of such metrologically valid procedures enables the generation of traceable and comparable isotope data. To realize this suitable isotope and/or δ-reference materials are required, which currently are not sufficiently available for most isotope systems. Boron is given as an example, for which the situation regarding isotope and δ-reference materials is excellent. Boron may therefore serve as prototype for other isotope systems. KW - Isotope reference materials KW - Delta reference materials KW - Traceability KW - Comparability KW - Measurement uncertainty KW - Synthetic isotope mixtures KW - Mass fractionation KW - Mass discrimination PY - 2013 DO - https://doi.org/10.5702/massspectrometry.S0020 SN - 2187-137X SN - 2186-5116 VL - 2 IS - 50020 SP - 1 EP - 7 AN - OPUS4-28562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohwetter, Philipp A1 - Habel, Wolfgang ED - Jaroszewicz, L.R. T1 - Fibre-optic sensors for partial discharge-generated ultrasound in elastomeric high-voltage insulation materials N2 - Recent progress in the development of ultrasonic fibre-optic sensors for detecting acoustic emission from partial discharge in elastomeric insulations is presented. These sensors are an important part of a proposed comprehensive scheme for the fibre-optic monitoring of cable accessories. After specifying the underlying design goals the improved fibre-optic sensor design is outlined. It is experimentally shown that it offers about ten-fold improvement over a previously investigated resonant cantilever-type design in terms of detection limit, making it competitive with conventional piezoelectric transducers, however with the added compatibility with strong electrical fields and electromagnetically noisy environments. T2 - EWOFS 2013 - 5th European workshop on optical fibre sensors CY - Kraków, Poland DA - 2013-05-19 KW - Acoustic emission KW - Fiber optics sensors KW - Sensors KW - Transducers KW - Ultrasonics KW - Ultrasonography KW - Fiber-optic condition monitoring KW - Partial discharge KW - Silicone elastomer KW - Stress cone KW - High-voltage cable accessories KW - Sagnac interferometer KW - Acoustic waveguide PY - 2013 SN - 978-0-819-49634-8 DO - https://doi.org/10.1117/12.2025824 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 8794 IS - 181 SP - 879407-1 EP - 879407-4 AN - OPUS4-28563 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -