TY - JOUR A1 - Schmitt, R. A1 - Koerfer, F. A1 - Sadowny, O. A1 - Zimmermann, J. A1 - Krüger-Sehm, R. A1 - Xu, M. A1 - Dziomba, T. A1 - Koenders, L. A1 - Goch, G. A1 - Tausendfreund, A. A1 - Patzelt, S. A1 - Simon, S. A1 - Rockstroh, L. A1 - Bellon, Carsten A1 - Staude, Andreas A1 - Woias, P. A1 - Goldschmidtböing, F. A1 - Rabold, M. T1 - Virtuelle Messgeräte - Definition und Stand der Entwicklung N2 - Die Mikro- und Nanotechnologie gehört zu den Schlüsseltechnologien des 21. Jahrhunderts mit hohen Wachstumsprognosen, wie auch die im Auftrag des BMBF durchgeführte Studie “Nanotechnologie als wirtschaftlicher Wachstumsmarkt” von 2004 ausführlich darstellt. Aus diesem Trend resultiert ein steigender Bedarf an Messsystemen, die Nanostrukturen prozessnah bzw. im Fertigungsprozess charakterisieren können. Virtuelle Messgeräte liefern Erkenntnisse zur Entwicklung neuartiger Messsysteme, Analyse und Optimierung bestehender Verfahren sowie die Bestimmung der Messunsicherheit und modellbasierten Korrektur systematischer Fehler. Der virtuelle Messprozess umfasst neben dem Messmittel auch die Probe und die Wechselwirkungen zwischen beiden. In diesem Beitrag werden virtuelle Messgeräte vorgestellt sowie deren Anwendung diskutiert. N2 - Micro- and nanotechnology experienced a high economic growth in recent years. This yields in a growing demand for measuring instruments which are closely linked to the production process. Virtual measuring instruments provide knowledge for the development of new systems, the analysis and optimization of established devices as well as the determination of the uncertainty in measurement. The virtual measuring process consists of the measuring instrument, the sample, and the interaction between both. In this article examples of current developments of virtual instruments are presented and their way of utilization is discussed. KW - Virtuelle Messtechnik KW - Simulation KW - Messunsicherheit KW - Virtual metrology KW - Measurement uncertainty PY - 2008 DO - https://doi.org/10.1524/teme.2008.0872 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 75 IS - 5 SP - 298 EP - 310 PB - Oldenbourg CY - München AN - OPUS4-17569 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dmitriev, Andrey A1 - Österle, Werner T1 - Modeling of brake pad-disc interface with emphasis to dynamics and deformation of structures N2 - The frictional behavior at local contacts in an automotive brake system was analysed on the basis of computer simulation by movable cellular automata method. The boundary conditions of the model were adjusted to experimental observations obtained by TEM. The model proved to be adequate for simulating mechanical mixing and velocity accommodation at the pad-disc interface. Dynamics of particle interaction were visualized by showing rotation angles and velocity vectors. The model provided information on the development of plastic deformation for metal-on-metal contacts and on crack formation at graphite lamellae of cast iron disc. Results are in agreement with conventional friction theories. KW - Nanotribology KW - Pad-disc interface KW - Simulation KW - Mechanically mixed layer PY - 2010 DO - https://doi.org/10.1016/j.triboint.2009.10.012 SN - 0301-679X VL - 43 IS - 4 SP - 719 EP - 727 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-20876 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehrstedt, Klaus-Dieter A1 - Malow, Marcus T1 - Letter to the Editor - Comments on the "Letter to the editor" by M.-L. You and C.-M. Shu (Journal of Thermal Analysis and Calorimetry, 2010;100:367-369) as response to the "Letter to the editor" by M. Malow and K.-D. Wehrstedt (Journal of Thermal Analysis and Calorimetry, 2009;98:885-886) KW - Dilauroyl peroxide KW - Oxygen balance KW - DSC KW - Simulation KW - SADT PY - 2011 DO - https://doi.org/10.1007/s10973-010-1122-0 SN - 1388-6150 SN - 1418-2874 SN - 0368-4466 SN - 1572-8943 VL - 103 IS - 1 SP - 409 EP - 410 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-23210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kloß, Heinz A1 - Marwitz, Christian A1 - Breitkreiz, Maxim T1 - Reibung - eine mehrskalige Beschreibung unter Berücksichtigung von Modellbetrachtungen, experimentellen Ergebnissen und Simulationsrechnungen KW - Reibung KW - Adhäsion KW - Deformation KW - Rauheit KW - Simulation KW - Reaktionsschicht KW - Friction KW - Adhesion KW - Roughness KW - Reaction layer PY - 2010 SN - 0724-3472 VL - 57 IS - 6 SP - 14 EP - 18 PB - Expert Verlag CY - Renningen AN - OPUS4-23356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Qiao, Linan A1 - Zencker, Uwe A1 - Wieser, Günter A1 - Völzke, Holger ED - Topping, B. H. V. ED - M. Papadrakakis, T1 - Numerical safety assessment of a transport and storage cask for radioactive materials without impact limiters by the 0.3m drop test onto an unyielding target T2 - 9th International Conference on Computational Structures Technology (CST2008) CY - Athens, Greece DA - 2008-09-02 KW - Impact KW - Simulation KW - Cask KW - Safety KW - Drop KW - Foundation KW - Unyielding KW - Target PY - 2008 SN - 978-1-905088-23-2 IS - Paper 21 SP - 1 EP - 10 PB - Civil Comp Press CY - Kippen AN - OPUS4-18340 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - von Oertzen, Alexander T1 - Simulating fireworks chain-reactions with cellular automata T2 - 11th International symposium on fireworks CY - Puerto Vallarta, México DA - 2009-04-20 KW - Simulation KW - Explosionswirkung KW - Feuerwerk KW - CHAF PY - 2009 SN - 978-0-9734123-8-3 SP - 1 EP - 17(?) AN - OPUS4-19394 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Babu, S. S. A1 - Sonnenberg, G. A1 - Schwenk, Christopher A1 - Goldak, J. A1 - Porzner, H. A1 - Khurana, S.P. A1 - Zhang, W. A1 - Gayler, J. T1 - How can computational weld mechanics help industry? KW - Schweißen KW - Simulation KW - Temperatur KW - Verzug KW - Eigenspannungen PY - 2010 SN - 0043-2296 SN - 0096-7629 VL - 89 IS - 1 SP - 40 EP - 45 PB - American Welding Society CY - New York, NY AN - OPUS4-20793 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tikhomirov, D. A1 - Schwenk, Christopher T1 - Efficient numerical welding simulation through standardisation KW - Schweißen KW - Simulation KW - Normung PY - 2010 SN - 1612-3433 VL - 9 IS - 5 SP - 292 EP - 295 PB - DVS - German Welding Society CY - Düsseldorf AN - OPUS4-22038 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tikhomirov, D. A1 - Schwenk, Christopher T1 - Effiziente numerische Schweißsimulation durch Standardisierung KW - Schweißen KW - Simulation KW - Normung PY - 2010 SN - 0036-7184 VL - 62 IS - 9 SP - 519 EP - 523 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-22041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert A1 - Hillemeier, B. A1 - Rieck, C. T1 - Struktur- und Feuchteuntersuchung in Betonstrukturen mit der Impuls-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Impuls-Thermografie KW - Beton KW - Hohlstellen KW - Kiesnester KW - Simulation PY - 2003 UR - http://www3.interscience.wiley.com/cgi-bin/jtoc/60500216/2005 SN - 0171-5445 SN - 1437-0980 VL - 25 IS - 1 SP - 22 EP - 26 PB - Ernst CY - Berlin AN - OPUS4-3164 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Xu, Ping T1 - Advances in resistance welding KW - Widerstandsschweißen KW - Hochfeste Stähle KW - Simulation PY - 2005 SN - 0036-7184 VL - 57 IS - 3 SP - 112 EP - 113 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-7279 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bomas, H. A1 - Hünecke, Joachim A1 - Laue, S. A1 - Schöne, Dieter A1 - Mayr, P. T1 - Anrisslebensdauervorhersage am Beispiel glatter und gekerbter Proben des Werkstoffes Cm15 KW - Kurze Risse KW - Simulation KW - Kerben KW - Korngröße KW - Ermüdung PY - 2002 UR - http://www3.interscience.wiley.com/cgi-bin/fulltext/93520356/PDFSTART SN - 0933-5137 SN - 1521-4052 VL - 33 IS - 5 SP - 230 EP - 237 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-2520 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Singh, Kai A1 - Hamann, Andreas A1 - Klingbeil, Dietmar A1 - Sievert, Rainer A1 - Künecke, Georgia A1 - Clos, R. A1 - Schreppel, U. A1 - Veit, P. T1 - Versagenssimulation dynamisch belasteter Proben mit unterschiedlichen Mehrachsigkeitszuständen unter Verwendung des Johnson-Cook-Versagensmodells für eine Nickelbasislegierung KW - Mehrachsigkeit KW - Simulation KW - Versagen KW - Johnson-Cook KW - Dynamisch KW - Nickelbasislegierung PY - 2003 UR - http://www.uni-magdeburg.de/ifme/techmech.html SN - 0232-3869 VL - 23 IS - 2-4 SP - 205 EP - 215 PB - Institut für Mechanik CY - Magdeburg AN - OPUS4-2861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Auer, C. A1 - Kalinka, Gerhard A1 - Krause, T. A1 - Hinrichsen, G. T1 - Crystallization Kinetics of Pure and Fiber-Reinforced Poly(phenylene Sulfide) KW - Verbundwerkstoffe KW - Thermoplaste KW - Kristallisation KW - Kristallisationskinetik KW - Erstarrung KW - Avrami KW - Modellrechnung KW - Simulation PY - 1994 SN - 0021-8995 SN - 1097-4628 VL - 51 SP - 407 EP - 413 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-11991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, T. A1 - Kalinka, Gerhard A1 - Auer, C. A1 - Hinrichsen, G. T1 - Computer Simulation of Crystallization Kinetics in FIber-Reinforced Composites KW - Verbundwerkstoffe KW - Thermoplaste KW - Kristallisation KW - Kristallisationskinetik KW - Erstarrung KW - Avrami KW - Modellrechnung KW - Simulation PY - 1994 SN - 0021-8995 SN - 1097-4628 VL - 51 SP - 399 EP - 406 PB - Wiley InterScience CY - Hoboken, NJ AN - OPUS4-11992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hünecke, Joachim A1 - Schöne, Dieter A1 - Klingbeil, Dietmar A1 - Bork, Claus-Peter T1 - Advanced life prediction by microstructural simulation of short cracks in a low carbon steel N2 - This paper deals with life prediction by observation and simulation of short fatigue cracks in cyclically loaded smooth and notched specimens made of 0.15 wt-% carbon steel SAE1017. The measured crack behaviour was simulated in a microstructural environment. Reference tests under constant amplitude loading allowed to determine model parameters and hence a reasonable life prediction by simulation resulted even for service loading. Short crack behaviour was a measurable property for damage also to compare smooth and notched specimens. KW - Short cracks KW - Life prediction KW - Simulation KW - Fatigue KW - Microstructure KW - Service loading KW - Notch KW - Kurze Risse KW - Gefüge KW - Ermüdung KW - Lebensdauer PY - 2006 DO - https://doi.org/10.1016/j.ijfatigue.2005.07.049 SN - 0142-1123 VL - 28 IS - 9 SP - 993 EP - 1000 PB - Elsevier CY - Oxford AN - OPUS4-12559 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boehm, Rainer A1 - Erhard, Anton T1 - Modelling of reflectivity patterns from artificial defects T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - NDT KW - Ultrasound KW - Simulation KW - Reflectivity KW - Focussing KW - SAFT KW - Imaging PY - 2006 SN - 3-931381-86-2 SP - 1 EP - 10(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wieser, Günter A1 - Qiao, Linan A1 - Eberle, Arno A1 - Völzke, Holger T1 - Thermomechanical Finite-Element Analyses of Bolted Cask Lid Structures KW - Aircraft crash KW - Fire load KW - Simulation KW - Lid-seal system KW - Storage cask KW - Metallic seal KW - Leakage rate PY - 2004 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 15 IS - 3-4 SP - 223 EP - 230 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-14440 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wieser, Günter A1 - Qiao, Linan A1 - Völzke, Holger A1 - Wolff, Dietmar A1 - Droste, Bernhard T1 - Safety analysis of casks under extreme impact conditions KW - Aircraft crash KW - Impact load KW - Simulation KW - Lid-seal system KW - Storage cask KW - Metallic seal KW - Leakage rate PY - 2004 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 15 IS - 2 SP - 141 EP - 147 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-14441 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schiller, Wolfgang Arno A1 - Müller, Ralf A1 - Rabe, Torsten ED - R. Clasen, ED - M. Herrmann, ED - Roosen, A. T1 - Über das Sintern von LTCC KW - LTCC KW - Komposite KW - Multilayer-Technik KW - Sintern KW - Simulation PY - 2007 SN - 0177-6983 VL - 21 IS - 1 SP - 41 EP - 46 PB - Göller CY - Baden-Baden AN - OPUS4-16428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tikhomirov, D. A1 - Rietman, B. A1 - Schwenk, Christopher A1 - Franz, T. T1 - Methoden der Schweißverzugssimulation für die Anwendung in der Automobilindustrie N2 - In diesem Artikel wird eine Übersicht über die Methoden zurnumerischen Berechnung schweißbedingter Bauteilverzüge fürindustrielle Anwendungen gegeben. Zunächst werden die Anforderungen der Automobilindustrie an die benötigte Softwaredargestellt. Dabei wird zwischen der industriellen Forschungund der Entwicklung/Produktionsplanung differenziert. Es werden die verschiedenen derzeit verfügbaren Ansätze zur numerischen Schweißsimulation vorgestellt und deren Möglichkeitenzur Erfüllung der dargestellten Bedürfnisse erläutert. Anhand eines aktuellen Bauteils aus der Automobilindustrie (B-SäuleVW Golf) wird beispielhaft die Verzugsoptimierung mit Hilfe einer Berechnungsmethodik aufgezeigt, welche sich durch eine schnelle Modellerstellung, kurze Rechenzeiten und einfache Handhabung auszeichnet. Ein Vergleich der Simulationsergebnisse mit experimentell ermittelten Daten zeigt sehr gute Über-einstimmungen und verdeutlicht das immense Potenzial einer numerisch unterstützten Prozessoptimierung. KW - Schweißen KW - Simulation KW - Verzug KW - Automobilindustrie PY - 2007 SN - 0036-7184 VL - 59 IS - 12 SP - 678 EP - 680 PB - Verl. für Schweißen u. Verwandte Verfahren, DVS-Verl. CY - Düsseldorf AN - OPUS4-16500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -