TY - CONF A1 - Erning, Johann Wilhelm T1 - Corrosion of 1.4521 Pipes in drinking water N2 - Pipes for drinking water made from 1.4521 showed unexpected crevice corosion. The presentation shows the reasons for this damage T2 - Eurocorr 2021 CY - Online meeting DA - 20.09.2021 KW - Crevice corrosion KW - Drinking water KW - Failure analysis PY - 2021 AN - OPUS4-53516 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm A1 - Burkert, Annette A1 - Bohlmann, Tatjana T1 - Corrosion Problems with 1.4521 steel pipes in drinking water N2 - In several cases crevice corrosion with 1.4521 stainless steel pipes was observed. The presentation shows the investigations that lead to the solution of the failure cases T2 - Eurocorr 2020 CY - Online meeting DA - 07.09.2020 KW - Crevice corrosion KW - Drinking water KW - Stainless steel KW - Failure analysis PY - 2020 AN - OPUS4-51235 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erning, Johann Wilhelm A1 - Kamaraj, A. T1 - Susceptibility of 304 Stainless Steel to Crevice Corrosion in Electrochemically Active Fluids JF - Corrosion N2 - The susceptibility of Type 304 stainless steel (SS) to crevice corrosion upon contacting with electrochemically active fluids was investigated using exposure tests and stepwise potentiostatic polarization. Crevice materials made of 304 SS and polyether ether ketone (PEEK) were focused on in this study. The combined influence of oxidant and chloride concentration on crevice corrosion was examined in detail in the two types of crevice combinations (304 SS-to-PEEK and 304 SS-to-304 SS). The 304 SS specimens were strongly susceptible to crevice corrosion when coupled with 304 SS. Even at a low concentration of 5 mg/L free chlorine and 150 mg/L chloride, which is below nominal dilutions in beverage industries, the examined specimens underwent crevice corrosion in both crevices. The effect of water composition on crevice corrosion was also studied, indicating high susceptibility of 304 SS to crevice corrosion in low pH (pH ≤ 5) solutions. The corroded surface morphology was analyzed using scanning electron microscope, energy dispersive x-ray, and confocal. KW - Crevice corrosion KW - Disinfectants KW - Stainless steel PY - 2020 DO - https://doi.org/10.5006/3324 SN - 0010-9312 VL - 76 IS - 4 SP - 424 EP - 435 PB - Nace International CY - Houston AN - OPUS4-50652 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm A1 - Kamaraj, Abinaya T1 - Crevice corrosion of 304 stainless steel under the influence of chlorine and chloride N2 - Der Einfluss von elektrolytisch erzeugten Desinfektionsmitteln auf die Spaltkorrosion des nichtrostenden Stahls 1.4301 wird dargestellt. Der Einfluss der Chlor- und Chloridkonzentration wird ermittelt N2 - The influence of electrolytically produced disinfectants on crevice corrosion of 304 stainless steel is shown. The influence of chlorine and chloride concentrations is determined. T2 - Kormat 2020 CY - Online meeting DA - 26.11.2020 KW - Crevice corrosion KW - Werkstoffe KW - Stainless steel KW - Disinfection PY - 2020 AN - OPUS4-51698 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm A1 - Kamaraj, Abinaya T1 - Susceptibility of 304 stainless steel to crevice corrosion in electrochemically active fluids N2 - The crevice corrosion behaviour of stainless steel 304 L n ECA fluids is investigated. Results are described, rules for operation are suggested T2 - Ceocor-Tagung 2019 CY - Copenhagen, Denmark DA - 21.05.2019 KW - Desinfection KW - Crevice corrosion KW - ECA PY - 2019 AN - OPUS4-49280 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm A1 - Kamaraj, Abinaja T1 - Influence of electrochemically active fluids on the corrosion risk of stainless steel N2 - The influence of electrochemically produced disinfectants on the corrosion behaviour of stainless steel is discussed. Special attention is given to crevice corrosion. T2 - Eurocorr 2018 CY - Krakau, Poland DA - 10.09.2018 KW - Crevice corrosion KW - Stainless steel KW - Disinfection PY - 2018 AN - OPUS4-46125 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm A1 - Kamaraj, Abinaya T1 - Influence of electrochemically active fluids on the corrosion risk of stainless steel T2 - Abstracts Eurocorr 2018 N2 - The influence of electrochemically produced disinfectants on the corrosion behaviour of stainless steel is investigated. Special attention is given to crevice corrosion. T2 - Eurocorr 2018 CY - Krakau, Poland DA - 10.09.2018 KW - Disinfection KW - Crevice corrosion KW - Stainless steel PY - 2018 SP - 1 EP - 5 AN - OPUS4-46126 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -