TY - GEN A1 - Babutzka, Martin A1 - et al., T1 - Exposure Site Catalogue - Catalogue of atmospheric corrosion field exposure sites in Europe N2 - Exposure sites and outdoor exposure have always been a part of atmospheric corrosion research providing the “final answer”, although at the cost of long exposure times. Individual exposure programs such as ISOCORRAG, MICAT and ICP Materials have resulted in collaborative networks of exposure sites. So far, however, there has been no collective effort to put together currently active sites in a comprehensive manner and across programs and nations. The information collected in the catalogue is possible thanks to the work of all individual site managers listed as contact persons, efforts of members of Working Party 25 (WP25) Atmospheric Corrosion of the European Federation of Corrosion (EFC) and financial support of the EFC. With this Catalogue you can both get a general overview of what is available and be guided if you are looking for a particular environment with certain characteristics. KW - Atmospheric Corrosion KW - Atmosphärische Korrosion KW - Corrosion KW - Korrosion KW - Exposure KW - Auslagerungsversuche PY - 2022 UR - https://efcweb.org/Scientific+Groups/WP25_+Atmospheric+Corrosion/Current+Activities/_/Exposure%20site%20catalogue%20EFC%20lores.pdf SP - 1 EP - 56 PB - European Federation of Corrosion, EFC AN - OPUS4-55284 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph T1 - Review: Advanced Coating Materials N2 - This book by Scrivener Publishing contains 14 chapters written by 82 leading scientists, experienced in the field of coatings. They demonstrate mechanisms, usage and manipulation of cutting‐edge coating methods. Each chapter is well structured and ends with a conclusion, highlighting the content. The book is divided into 3 parts: “Materials and Methods”, “Coating Materials Nanotechnology” and “Advanced Coating Technology and Applications”. Finally, this book provides a comprehensive insight into innovative research in advanced coating materials and state‐of‐the‐art technologies, without being a real textbook. It fulfills its intension of being beneficial both for technicians and scientists. KW - Corrosion KW - Coating KW - Protection PY - 2020 DO - https://doi.org/10.1002/maco.202070044 SN - 1521-4176 SN - 0947-5117 VL - 71 IS - 4 SP - 675 EP - 676 PB - WILEY‐VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-50629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seifert, Lando T1 - Exposé on the PhD-thesis: Initiation of stress corrosion cracking in prestressing steels N2 - The exposé is a mandatory part of the doctoral process at TUM and should outline the topic of the thesis and the future research focus. Ideally, the exposé forms the basis for the subsequent dissertation. The candidates topic is about hydrogen-induced stress corrosion cracking (HiSCC) of prestressing steels, which is a significant concern in civil engineering, particularly for prestressed concrete roofs and bridges. The susceptibility of prestressing steels to HiSCC is mainly influenced by manufacturing processes and the chemical composition, while the ability to hydrogen charging is influenced by the environmental and surface conditions. To know about the real nature of susceptibility of the prestressing steel might be an important puzzle piece to contribute to safe prestressed concrete structures in the future. The material susceptibility of prestressing steels toward HiSCC is a topic which must be studied independently of the environmental conditions. This cumulative dissertation will focus on the most important aspects of material properties that play a role in the initiation point of HiSCC. KW - Prestressing Steels KW - Hydrogen-induced stress corrosion cracking KW - Stress corrosion cracking KW - Brittle Fracture PY - 2024 SP - 1 EP - 8 CY - Graduate Center, TUM School of Engineering and Design, Technische Universität München AN - OPUS4-62051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ebell, Gino A1 - Achenbach, R. A1 - Angst, U. A1 - Brem, M. A1 - Dauberschmidt, C. A1 - Eichler, T. A1 - Hariri, K. A1 - Harnisch, J. A1 - Keßler, S. A1 - Mayer, T.F. A1 - Mietz, Jürgen A1 - Pruckner, F. T1 - Elektrochmische Potentialmessung zur Detektion von Bewehrungsstahlkorrosion N2 - Die Potentialmessung kann zum Auffinden korrosionsaktiver Bereiche neben Stahlbetonbauwerken auch bei Spannbetonbauwerken angewandt werden, die mit Spannstählen im direkten Verbund hergestellt werden. Bei Vorspannsystemen mit metallischen Hüllrohren im nachträglichen Verbund ist eine Aussage über den Korrosionszustand des Hüllrohrs, nicht aber des Spannstahls möglich. Messungen an Spannbetonbauteilen erfordern grundsätzlich die besonderen Kenntnisse eines Spezialisten. KW - Korrosion KW - Potentialfeldmessung KW - Corrosion KW - Concrete PY - 2021 SN - 978-3-947971-16-9 VL - Merkblatt B 03 SP - 1 EP - 22 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-53091 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ebell, Gino A1 - Mayer, T. F. T1 - Korrosions- und Verbundverhalten bei beschichteten Fugenblechen N2 - Wechselwirkung von feuerverzinkten Fugenblechen und Beton bei Einsatz in WU-Bauwerken. Mögliche Wasserstoffentwicklung an feuerverzinkten Fugenblechen durch Einwirkung hochalkalischer Medien wie Beton kann durch ausreichend großflächigen, kathodisch wirksamen, Betonstahl unterbunden werden. KW - Korrosion KW - Feuerverzinkter Stahl KW - Korrosionsschutz PY - 2023 SP - 1 EP - 6 CY - online DBV AN - OPUS4-57488 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph T1 - Review: Polymer Coatings ‐ A Guide to Chemistry, Characterization, and Selected Applications N2 - This book grew out of a course on polymer coatings held by the author at the university. It shall serve as an introduction to the wide field of polymer coatings. It is not intended to cover completely all facts on polymer coatings. All chapters are well structured. Selected figures and formulas illustrate the content and contribute to a good understandability. At the end of each chapter some hints for further reading are provided. Finally, the book fulfills its intention to introduce into the topic by providing basics on science and technology of polymer coatings, suitable for chemists in industry, materials scientists, polymer chemists and physical chemists. KW - Corrosion KW - Coating KW - Polymer PY - 2020 DO - https://doi.org/10.1002/maco.202070024 SN - 1521-4176 SN - 0947-5117 VL - 71 IS - 2 SP - 321 EP - 322 PB - WILEY‐VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-50374 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Joana T1 - Rezension: Konformität von Produkten ‐ Gesetzliche Anforderungen, Konformitätsbewertungen, Konformitätsdokumente, Prüfbescheinigungen N2 - Im europäischen Warenhandel kommt es durch immer mehr EU‐Vorschriften und damit verbundener Verschärfung gesetzlicher Anforderungen zu deutlich höherer Nachfrage von Konformitätserklärungen. Davon hängt nicht nur die Sicherheit der Endverbraucher sondern überhaupt die Einfuhrerlaubnis für Produkte ab. Um in diesem Wirrwarr an Regularien herauszufinden, welchen Vorschriften ein spezielles Produkt unterliegt und welche Konformitätsdokumente von wem auszustellen sind, gibt der Autor mit diesem Buch einen ersten Überblick zu den derzeit existierenden Regularien und den geforderten Konformitätsdokumenten. Auch wenn das Buch sich nicht unbedingt als Leitfaden für Produkthersteller eignet, hat der Autor hier zahlreiche nützliche Informationen zur Konformität von Produkten zusammengetragen und interpretiert, um dem Leser etwas Durchblick auf diesem komplexen Gebiet zu verschaffen. KW - Konformität KW - Qualitätsmanagement PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-503731 DO - https://doi.org/10.1002/maco.202070026 SN - 1521-4176 SN - 0947-5117 VL - 71 IS - 2 SP - 3 PB - WILEY‐VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-50373 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph T1 - Review: Corrosion‐Resistant Linings and Coatings N2 - This book introduces to aspects to be considered when dealing with coatings and linings. Philip A. Schweitzer covers and compares a variety of specific coatings and their applications. In 18 chapters he divided the content into two main parts: linings and coatings. All professionals involved in design and maintenance processes get by this book a compact survey of necessary considerations which needs to be done when applying surface protection measures. The literature references at the end of some chapters support the readers finding additional information about the special topic, mainly written by the author himself. Since this newly issued paperback edition is a 1:1 re‐print of the 2001 hardcover version, neither current publications are referenced, nor revisions were made. KW - Corrosion KW - Lining KW - Coating KW - Elastomer PY - 2020 DO - https://doi.org/10.1002/maco.202070094 SN - 1521-4176 SN - 0947-5117 VL - 71 IS - 9 SP - 1592 EP - 1593 PB - WILEY‐VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-51167 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph T1 - Review: Electrochemical Energy Storage ‐ Physics and Chemistry of Batteries N2 - Currently, storage of electric energy is becoming more and more interesting in terms of applicability and efficiency. One way is the electrochemical storage by already well‐developed battery‐systems. This textbook provides an introduction into physical and chemical processes necessary for battery application. This book fulfills its intension to serve graduate students of electrical engineering as an introduction into the field of batteries. Even students and interested readers of other faculties might find an introduction in physical and chemical background of batteries. KW - Batteries PY - 2020 DO - https://doi.org/10.1002/maco.202070124 SN - 1521-4176 SN - 0947-5117 VL - 71 IS - 12 SP - 2084 EP - 2085 PB - WILEY‐VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-51780 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bäßler, Ralph T1 - Rezension: Analytik - Daten, Formeln, Übungsaufgaben N2 - Seit seiner erstmaligen Veröffentlichung im Jahre 1894 als „Logarithmische Rechentafeln für Chemiker“ und ab 1982 als „Rechentafeln für die chemische Analyse“ begleitet der „Küster‐Thiel“ Generationen nicht nur von Laborantinnen und Laboranten sowie Studierende hilfreich bei der analytischen Arbeit. Mit der 108. Auflage änderte sich 2016 der Titel dieses in der „Studium“‐Reihe des De Gruyter Verlages herausgegebenen Standardwerkes ein weiteres Mal. Die 109. Auflage des Klassikers der chemischen Analytik‐Literatur setzt die Tradition fort, mit zahlreichen anschaulichen Erklärungen, Beispiele und Rechnungen Chemikern, Physikern und Ingenieurswissenschaftlern an Universitäten und Fachhochschulen; Auszubildenden und Laboranten ein übersichtliches und aktuelles Arbeitsmittel für den analytischen Alltag zur Verfügung zu stellen. Nutzern früherer Ausgaben wird der Umstieg auf die neue Ausgabe empfohlen, damit auch sie auf dem neuesten Stand arbeiten können. KW - Analyse KW - Labor KW - Formeln KW - Laborarbeit PY - 2020 DO - https://doi.org/10.1002/maco.202070106 SN - 1521-4176 SN - 0947-5117 VL - 71 IS - 10 SP - 2 EP - 3 PB - WILEY‐VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-51415 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -