TY - INPR
A1 - Morcillo, Dalia
A1 - Oelze, Marcus
A1 - Seena Prem, Pranav
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Emmerling, Franziska
A1 - Recknagel, Sebastian
A1 - Panne, Ulrich
A1 - Abad Andrade, Carlos Enrique
T1 - Lithium isotope fractionation as an early indicator of degradation mechanisms in lithium-ion batteries
N2 - Aging in lithium-ion batteries (LIBs) degrades performance and hinders sustainability, demanding advanced diagnostics for early failure prediction. We investigate lithium isotope fractionation (LIF) as an innovative probe of degradation in lithium cobalt oxide (LCO) coin cells aged over 0−700 cycles. High-precision multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) quantified δ7Li variations across cell stages: non-cycled (0 cycles), newly formed (5 cycles), semi-aged (250 cycles), and fully aged (700 cycles). During early cycling (≤ 45 cycles), chemical processes drive 7Li enrichment at the anode (δ7Li vs LSVEC = +12 ‰) through solid electrolyte interphase (SEI) formation, while the cathode depletes in 7Li (δ7Li vs LSVEC = −0.7 ‰). Beyond 45 cycles, electric field-induced migration predominates, promoting 6Li intercalation into the anode and increasing the δ7Li of the cathode by 8.1 ‰. Mass balance verifies isotope conservation, attributing shifts to redistribution and trapping. Complementary electrochemical impedance spectroscopy (EIS) and X-ray absorption spectroscopy and diffraction confirm SEI expansion, cobalt oxidation, lattice shrinkage, and changes in electrode structure, corroborating LIF trends. Notably, a δ7Li inflection at approximately 270 cycles anticipates end-of-life by 70 cycles, surpassing traditional methods in sensitivity. LIF emerges as a predictive indicator of aging mechanisms, informing optimized designs for durable LIBs.
KW - Lithium isotope fractionation
KW - Lithium-ion batteries
KW - Degradation mechanisms
KW - LiCoO2 cathodes
KW - LCO
KW - Isotopic tracing
KW - Lithium isotopes
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650945
DO - https://doi.org/10.26434/chemrxiv-2025-16lvq
SP - 1
EP - 19
AN - OPUS4-65094
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Rossi, A
T1 - Lactose Tablets as Suitable Microplastics Reference Material to Support Validation Studies and Quality Control
N2 - One of the main challenges in validating microplastics detection methods is the lack of suitable reference materials that accurately reflect the properties of interest. To bridge this gap, the EU-funded PlasticTrace project has developed water-soluble tablets containing precisely defined amounts of polyethylene terephthalate (PET) particles. Each tablet includes a specific mass (0.2, 18.5, or 400 µg) and particle count (151 or 1764, measured via Raman spectroscopy). Production follows a rigorous solid-phase dilution process, ensuring high reproducibility and quality control. The PET particles used in these tablets have an average size of approximately 40 µm, with a range between 10 and 200 µm, and an irregular, stone-like shape. All measurements align with ISO/TC 147/SC 2 standardization efforts and adhere to ISO/DIS 16094-2 and ISO/DIS 16094-3. To assess tablet homogeneity, the most widely accepted microplastics detection techniques, i.e. µ-FTIR, µ-Raman, Py-GC/MS, and TED-GC/MS, were applied. Different batches were produced, each containing varying particle numbers and masses, reaching the detection limits of the methods used. The results demonstrated excellent consistency between tablets, successfully passing homogeneity tests. Furthermore, no significant changes were observed in the tablets' composition or stability after six months of storage. This innovative reference material represents an important advancement in microplastics analysis, supporting laboratories in meeting EU Commission requirements for the monitoring of microplastics in drinking water and wastewater with greater accuracy and reliability. The production process can be transferred for other plastic particles is this size range.
T2 - BERM 16
CY - Halifax, Canada
DA - 01.06.2025
KW - Microplastics
KW - TED-GC/MS
KW - Reference materials
KW - Raman microscopy
PY - 2025
AN - OPUS4-63403
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rösler, Alexander
A1 - Weidner, Steffen
A1 - Klamroth, Tillmann
A1 - Müller, Axel H. E.
A1 - Schlaad, Helmut
T1 - Kinetics of anionic polymerization of β‐myrcene in hydrocarbon solvents
N2 - The kinetics of anionic polymerization of β‐myrcene initiated by sec‐butyllithium were examined in saturated and unsaturated hydrocarbon solvents, i.e. cyclohexane, cyclohexene, 4‐vinylcyclohexene and dl‐limonene. Polymerizations usually proceeded in a living manner, i.e. in the absence of termination and chain transfer reactions, in all solvents, to produce well‐defined polymyrcenes with high content (85%) of cis‐1,4 units. However, polymyrcenyllithium chains exhibited limited long‐term stability in 4‐vinylcyclohexene solution, most probably due to chain transfer to solvent. Reaction orders with respect to the concentration of active chains were found to be one‐quarter in cyclohexane increasing to one‐half in unsaturated solvents, indicating that the polymyrcenyllithium chains are present as tetrameric or dimeric associates, respectively. Apparent activation energies were found to be 81 kJ mol−1 in cyclohexane and 77 kJ mol−1 in dl‐limonene solution, which are close to the values obtained by quantum chemical calculations.
KW - MALDI-TOF MS
KW - Anionic polymerization
KW - β‐myrcene
KW - Kinetics
KW - Reaction order
KW - Activation energy
KW - Microstructure
KW - Quantum chemical calculations
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630900
DO - https://doi.org/10.1002/pi.6772
SN - 1097-0126
SP - 1
EP - 8
PB - Wiley
CY - New York, NY
AN - OPUS4-63090
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rösler, Alexander
A1 - Weidner, Steffen
A1 - Klamroth, Tillmann
A1 - Müller, Axel HE
A1 - Schlaad, Helmut
T1 - Kinetics of anionic polymerization of β‐myrcene in hydrocarbon solvents
N2 - AbstractThe kinetics of anionic polymerization of β‐myrcene initiated by sec‐butyllithium were examined in saturated and unsaturated hydrocarbon solvents, i.e. cyclohexane, cyclohexene, 4‐vinylcyclohexene and dl‐limonene. Polymerizations usually proceeded in a living manner, i.e. in the absence of termination and chain transfer reactions, in all solvents, to produce well‐defined polymyrcenes with high content (85%) of cis‐1,4 units. However, polymyrcenyllithium chains exhibited limited long‐term stability in 4‐vinylcyclohexene solution, most probably due to chain transfer to solvent. Reaction orders with respect to the concentration of active chains were found to be one‐quarter in cyclohexane increasing to one‐half in unsaturated solvents, indicating that the polymyrcenyllithium chains are present as tetrameric or dimeric associates, respectively. Apparent activation energies were found to be 81 kJ mol−1 in cyclohexane and 77 kJ mol−1 in dl‐limonene solution, which are close to the values obtained by quantum chemical calculations. © 2025 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
KW - Myrcene
KW - Anionic polymerization
KW - Reaction order
KW - Activation energy
KW - Microstructure
KW - Quantum chemical calculation
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-636840
DO - https://doi.org/10.1002/pi.6772
SN - 0959-8103
SP - 1
EP - 8
PB - Wiley
AN - OPUS4-63684
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rösler, Alexander
A1 - Weidner, Steffen
A1 - Klamroth, Tillmann
A1 - Müller, Axel HE
A1 - Schlaad, Helmut
T1 - Kinetics of anionic polymerization of β‐myrcene in hydrocarbon solvents
N2 - AbstractThe kinetics of anionic polymerization of β‐myrcene initiated by sec‐butyllithium were examined in saturated and unsaturated hydrocarbon solvents, i.e. cyclohexane, cyclohexene, 4‐vinylcyclohexene and dl‐limonene. Polymerizations usually proceeded in a living manner, i.e. in the absence of termination and chain transfer reactions, in all solvents, to produce well‐defined polymyrcenes with high content (85%) of cis‐1,4 units. However, polymyrcenyllithium chains exhibited limited long‐term stability in 4‐vinylcyclohexene solution, most probably due to chain transfer to solvent. Reaction orders with respect to the concentration of active chains were found to be one‐quarter in cyclohexane increasing to one‐half in unsaturated solvents, indicating that the polymyrcenyllithium chains are present as tetrameric or dimeric associates, respectively. Apparent activation energies were found to be 81 kJ mol−1 in cyclohexane and 77 kJ mol−1 in dl‐limonene solution, which are close to the values obtained by quantum chemical calculations. © 2025 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
KW - Myrcene
KW - Anionic polymerization
KW - MALDI TOF MS
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-649039
DO - https://doi.org/10.1002/pi.6772
SN - 0959-8103
SP - 1
EP - 8
PB - Wiley
AN - OPUS4-64903
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Margreiter, R.
A1 - Baumann, J.
A1 - Mantouvalou, I.
A1 - Radtke, Martin
A1 - Reinholz, Uwe
A1 - Strub, E.
T1 - Investigations on fire-gilding
N2 - Fire-gilding is a historic technique for the application of golden layers on a number of different base materials utilizing a gold amalgam. This technique leaves a significant amount of Hg in the golden layer, giving archeometrists a reliable indicator to identify firegildings.
Recent findings on presumably fire-gilded objects have shown in several cases significantly lower Hg content than previously studied objects. This prompted a synchrotron-based X-ray fluorescence investigation into the Hg distribution along the material–gilding interface, as well as a series of measurements regarding the Hg content development in fire-gilded samples during artificial aging. This work presents findings on laboratory-prepared fire-gildings, indicating an Hg enrichment at the interface of firegilded silver samples. Notably, such an enrichment is missing in fire-gilded copper samples. Further, it is confirmed that fire-gilded layers typically do not undercut an Hg bulk content of 5%. In this light, it seems improbable that ancient samples that contain <5% Hg are fire-gilded. The results presented in this study might lead to a non-destructive method to identify the Hg enrichment at the interface. This might be obtained by a combination of different non-destructive measurements and might also work unambiguously in samples in which the gold top layer is altered.
KW - BAMline
KW - X-Ray Fluorescence
KW - Gilding
KW - Depth profile
KW - Archaeometry
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-552885
DO - https://doi.org/10.1111/arcm.12797
SN - 0003-813X
SP - 1
EP - 14
PB - Wiley online library
AN - OPUS4-55288
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Lutz, C.
A1 - Hampel, S.
A1 - Beuermann, S.
A1 - Turek, T.
A1 - Kunz, U.
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Radtke, Martin
A1 - Fittschen, U. E. A.
T1 - Investigation on Vanadium Species Distribution in Nafion™ 117 after Cyclization in a Vanadium Redox Flow Battery
N2 - The vanadium redox flow battery (VRFB) is currently a potential candidate for stationary energy storage. A major challenge is the unintended vanadium transport through the separator, which results in a fade of capacity. To overcome this issue, it is necessary to understand the transport processes in the membrane on a more fundamental level. In this work, the vanadium species distribution in Nafion™ 117 after cyclization was investigated. Two membranes, one from a charged VRFB and another from a discharged VRFB, were analyzed using ultraviolet–visible spectroscopy (UV/VIS) and X-ray absorption near edge structure spectroscopy (XANES). Little difference between the two membranes was recognizable according to the UV/VIS results. In comparison, the XANES results showed that the membrane from the charged VRFB contains more V3+ than VO2+, whereas for the discharged case, more VO2+ is present in the membrane.
KW - Synchrotron
KW - BAMline
KW - XANES
KW - Vanadium redox flow battery
PY - 2021
VL - 64
SP - 1
EP - 8
AN - OPUS4-54144
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Lutz, C.
T1 - Investigation on Vanadium Crossover in Nafion ™ and Novel PVDF Based Membranes for Vanadium Redox Flow Batteries
N2 - Vanadium redoxflow batteries (VRFB)are currently one of the most promising candidates for stationary energys torage.For large scale applications the ion conducting membranes currently in use need to be improved. Ideally,they need to become more cost efficient and selective regarding the vanadium crossover.For a better understanding of the vanadium crossover, the development of reliable analytical methods and procedures, that elucidate uptake and transport of vanadium ions in the membrane, is necessary. First, we present the uptake of V2+,V3+,VO2+, VO2+ and V2O33+ in Nafion™ and in a novel membrane based onpoly(1,1-difluoroethylene)(PVDF). In preliminary discharge/charge experiments the ETFE-based membrane, the precursor of PVDF-based membrane, performed comparable to Nafion™. The methods of choice for speciation are UV/Vis and X-ray absorption near edge structure spectroscopy (XANES). According to the results, V2O33+, formed from VO2+ and VO2+, diffuses also into the membrane. In present models, the diffusion of V2O33+ is neglected. In addition,we study whether reactions could take place inside the membranes’ nanoscopic water body using XANES. Exposing Nafion™ from one site with V3+a nd from the other site with VO2+ realized the experiment. The results verified that VO2+ was formed inside the membrane. However,in present models reactions inside the membrane are neglected, too.
T2 - Denver X-Ray Conference
CY - Online meeting
DA - 03.08.2020
KW - Batteries
KW - BAMline
KW - XANES
KW - VRF
PY - 2020
AN - OPUS4-51909
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Iro, M.
T1 - Investigation of the transmission properties of a polycapillary half-lens and their effect on quantification for confocal μXRF
N2 - Confocal Micro X-ray fluorescence analysis (μXRF) is a powerful method for the destruction-free investigation of the elemental composition of various samples in three dimensions. Quantitative results rely heavily on the transmission properties of polycapillary optics, used in confocal setups.
Different models for the functional correlation between energy and transmission of a polycapillary half-lens are compared with experimental data, established with a monochromatic confocal laboratory setup [1], as well as Monte-Carlo-Simulations [2]. The effect of the different approaches on quantitative results are compared using well known SRMs, ranging from thick samples to thin layers and structured materials.
Along with this the basic principles for quantitative evaluations of XRF spectra taken with confocal setups are presented, and compared with experimental results.
T2 - Denver X-Ray Conference
CY - Online meeting
DA - 02.08.2021
KW - Synchrotron
KW - BAMline
KW - Polycapillaries
PY - 2021
AN - OPUS4-54143
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Marquardt, Julien
T1 - Investigating the morphology of nanostructured mixed metal oxides (Ir/TiOx) and its impact on the electrocatalytic OER-activity
N2 - The electrocatalytic conversion of water into molecular hydrogen and oxygen under the utilization of excess renewable energies, such as wind power, photovoltaics and hydroelectric power is one possible pathway to establish a sustainable hydrogen economy. The obtained hydrogen is either stored and used in a fuel cell or consumed on-site in industrial applications.
Water electrolysis systems (WES) are based on two half cell reactions, such as oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) which both proceed simultaneously. The OER suffers from slow reaction kinetics and thus limits the overall performance.
The most promising compounds in acidic electrolysis are IrO2 and RuO2. Due to their rare abundance and extremely high price a wide use of acidic WES was prevented. Lowering the catalysts noble metal content by mixing iridium with titanium reduces the production costs.
Thin films are produced by dip coating a solution of metal oxide precursors alongside with a polymer template dissolved in ethanol. The obtained samples are subsequently calcined to the remove the template and adjust crystallinity. Finally, an additional iridium deposition step was performed on the outer surface plane area.
Understanding the influence of structural and morphological aspects on the OER-activity is beneficial to further optimize WES. The current presentation will thus give detailed insights to structural aspects obtained by Raman spectroscopy, small- and wide-angle X-ray scattering which are then combined with electrochemical parameters to deduce structure-activity relationships.
T2 - Joint Polish-German Crystallographic Meeting 2020
CY - Wrocław, Poland
DA - 24.02.2020
KW - nanostructured
KW - electrocatalysis
PY - 2020
AN - OPUS4-50664
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Insights into materials with hard x-rays: capabilities of the bamline
N2 - This contribution provides an overview of the BAMline synchrotron radiation beamline, which specializes in hard X-ray spectroscopy techniques for materials research. The BAMline offers X-ray absorption spectroscopy (XAS), x-ray fluorescence spectroscopy (XRF), and tomography to study materials' electronic structure, chemical composition, and structure. Key capabilities include standard and dispersive XAS for electronic structure, micro-XRF for elemental mapping, coded aperture imaging, and depth-resolved grazing exit XAS. The BAMline enables in situ characterization during materials synthesis and functions for energy, catalysis, corrosion, biology, and cultural heritage applications.
Ongoing developments like the implementation of machine learning techniques for experiment optimization and data analysis will be discussed. For instance, Bayesian optimization is being used to improve beamline alignment and scanning. An outlook to the future, where the BAMline will continue pioneering dynamic and multi-scale characterization, aided by advanced data science methods, to provide unique insights into materials research, will be given.
T2 - μ-XRF at Elettra 2.0: challenges and opportunities
CY - Trieste, Italy
DA - 11.09.2023
KW - Synchrotron
KW - XRF
KW - XANES
KW - Bayes
PY - 2023
AN - OPUS4-58607
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Fernández-González, V.
T1 - Innovations in Microplastic Measurement: A Pyrolysis Approach for a Polyethylene Terephthalate Reference Material
N2 - In the framework of the PlasticTrace project, in which a reference material for PET microplastics will be proposed, a method using pyrolysis and gas chromatography coupled with mass spectrometry detection (Py-GC-MS) is developed to quantify the mass of PET microplastics (10-100 µm) in tablets at two different concentration levels.
The overall aim of this project is to develop international metrological capacity that enables the traceable measurement and characterization of SMPs and NPs in environmental and food samples and the production of suitable reference materials, according to the metrological requirements (https://plastictrace.eu/).
The proposed method consists of dissolving the tablet containing the PET microplastics in milli-Q water and filtering the solution using a glass microfiber membrane 13 mm filter size, 1.6 µm pore size. After filtering and several washes to ensure complete dissolution of the tablet and recovery of all PET microplastics, the filter is removed, folded, and placed in a capsule of the pyrolyzer for direct Py-GC/MS analysis.
Two main markers were selected for PET quantification: vinyl benzoate and benzoic acid, with consistent concentrations found for both at high PET concentrations (≈400 µg) (24% RSD, n=17), but interferences with the matrix and vinyl benzoate were found at low concentrations (≈17 µg PET), with only benzoic acid being valid as a marker in this case (22% RSD, n=10).
As an alternative to the quantification of PET microplastics in tablets at low concentrations, derivatization is proposed, for which tetramethylammonium hydroxide solution (TMAH) is added directly into the pyrolysis cap. The PET marker in this case is dimethyl terephthalate, with which good results have also been found (19.6% RSD, n=10 ).
The proposed method is robust, simple, with high automation and very little sample handling and treatment, and allows the analysis of PET microplastics (>10 µm) in tablets with excellent accuracy and precision even at very low concentrations.
T2 - SETAC Europe 2025
CY - Vienna, Austria
DA - 11.05.2025
KW - Microplastics
KW - Nanoplastics
KW - GC/MS
PY - 2025
AN - OPUS4-63383
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Fittschen, U.
T1 - Improving surface sensitive XRF using ink jet printing and information from the angle dependent signal
N2 - Total Reflection X-ray Fluorescence (TXRF) is a small footprint, ressource efficient micro-analytical tool for trace elemental determination. However, depending on the matrix TXRF is also challenging in several ways: the preparation of a representative aliquot maybe difficult for slurries, shading effects and matrix effects may occur and the applicability of an IS maybe hampered by interferences (fitting may be impaired as well) or inhomogeneities. It is therefore crucial to understand and if applicable mitigate the influence of the before mentioned phenomena. We have used the small volume approach using pL droplets to study shading in TXRF previously.Using this approach thin specimens in a favorable geometry are prepared with a well defined morphology; this way minimizing matrix effects and shading. To be used as standard it is also necessary to determine the delivered elemental amounts. Here we will present on the performance of a commercial ink-jet printer cartridge to deliver defined volumes and elemental amounts. The microscopic specimens obtained have been successfully applied to determine relative sensitivities in TXRF and prepare references to study coded apertures in grazing incidence full field micro-XRF.The homogeneous lateral distribution of analyte and IS may be probed by micro-XRF, to obtain information on alikeness of analyte and IS. To study the alikeness of the in depth distribution (film-like or particle-like) angle scans can deliver valuable data. Here we present first results on angle scans using a prototype GIXRF set up and a commercial TXRF instrument.
T2 - Denver X-Ray Conference
CY - Online meeting
DA - 03.08.2020
KW - TXRF
KW - Coded Aperture
PY - 2020
AN - OPUS4-51913
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Eisentraut, Paul
T1 - Improvements in micro- & nanoplastic mass detection by TED-GC/MS
N2 - Introduction to microplastics, definition, relevance, analytical approaches & challenges. TED-GC/MS working principle, features & performance. Optimisation in TED-GC/MS methodology, new validation data. Replacement of Internal Standard, outlook towards upcoming publication and application within EU´s revised drinking water directive.
T2 - SETAC 2023
CY - Dublin, Ireland
DA - 01.05.2023
KW - Microplastics
KW - Thermoanalytics
KW - Validation
KW - Internal Standard
PY - 2023
AN - OPUS4-57421
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Chabbah, T.
A1 - Chatti, S.
A1 - Jaffrezic-Renault, N.
A1 - Weidner, Steffen
A1 - Marestin, C.
A1 - Mercier, R.
T1 - Impedimetric sensors based on diethylphosphonate-containingpoly(arylene ether nitrile)s films for the detection of lead ions
N2 - This article describes the elaboration and characterization of diethylphosphonate-containing polymers coated electrodes as sensors for the detection of heavy metalstraces, by electrochemical impedance spectroscopy. Diethylphosphonate groupswere chosen as heavy metals binding sites. Two different series of polymers bearingthese anchoring groups were synthesized. Whereas the diethylphosphonate groupsare directly incorporated in the aromatic macromolecular chain in some polymers, analiphatic spacer is removing the chelating site from the polymer backbone in others.The influence of the macromolecular structure on the sensing response was studied,especially for the detection of Pb2+,Ni2+,Cd2+and Hg2+. Polymer P6, including thehigher amount of diethylphosphonate groups removed from the polymer chain by ashort alkyl spacer gave the higher sensitivity of detection of lead ions, with a detec-tion limit of 50 pM
KW - Heavy metals
KW - Phosphonate esters
KW - Lead ions
KW - MALDI TOF MS
PY - 2023
DO - https://doi.org/10.1002/pat.6065
SN - 1042-7147
SP - 1
EP - 11
PB - John Wiley & Sons, Ltd
AN - OPUS4-57356
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Illuminating the Past, Shaping the Future: Advanced Technologies in Gold Analysis and Beamline Control
N2 - The presentation explores how synchrotron radiation is used for non-destructive and highly precise analysis of gold artifacts.
It explains how synchrotron radiation provides extremely bright and tunable X-rays that can examine very small areas with great accuracy. These features make it ideal for studying cultural heritage objects without damaging them. The presentation highlights case studies such as the Nebra Sky Disk, the Hiddensee gold jewelry, Phoenician ivory, and Egyptian gold from Abydos. These examples show how synchrotron-based techniques reveal details about the origin, composition, and manufacturing of ancient gold.
A major focus is the Bernstorf gold discovery in Bavaria. Over several years, different analytical methods, including synchrotron X-ray fluorescence, were applied to test whether the gold was genuinely ancient. The studies found nearly pure gold, sparking debate about whether such purity could be achieved in the Bronze Age.
In the final part, the presentation connects this research with modern developments in automation and artificial intelligence. It describes how beamline experiments can be controlled through the EPICS system, Python scripting, and AI tools such as ChatGPT and Whisper, enabling intelligent and voice-assisted operation.
T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin
CY - Wien, Austria
DA - 29.01.2025
KW - Synchrotron
KW - BAMline
KW - AI
KW - Gold
KW - XRF
PY - 2025
AN - OPUS4-64477
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Altmann, Korinna
A1 - Goedecke, Caroline
A1 - Bannick, C.-G.
A1 - Abusafia, A.
A1 - Scheid, C.
A1 - Steinmetz, H.
A1 - Paul, Andrea
A1 - Beleites, C.
A1 - Braun, U.
T1 - Identification of microplastic pathways within a typical European urban wastewater system
N2 - In recent years, thermoextraction/desorption-gas chromatography/mass spectrometry (TED-GC/MS) has been developed as a rapid detection method for the determination of microplastics (MP) mass contents in numerous environmentally relevant matrices and, in particular, for the measurement of polymers in water samples without time-consuming sample preparation. The TED-GC/MS method was applied to investigate a typical European municipal wastewater system for possible MP masses. Such investigations are important in view of the recent revision of the Urban Wastewater Treatment Directive. Four different representative sampling sites were selected: greywater (domestic wastewater without toilet), combined sewer, and influent and effluent of a wastewater treatment plant (WWTP). All samples were collected by fractional filtration. Filtration was carried out over mesh sizes of 500, 100, 50, and in some cases, 5 µm. Polyethylene (PE), polypropylene (PP), and polystyrene (PS) were detected in all samples, with the PE fraction dominating in all cases. Styrene-butadiene rubber which serves as an indication of tire abrasion, was only found in the influent of the WWTP. The highest MP mass contents were found in the combined sewer, so MP can become a source of pollution during heavy rain events when the capacity limits of the effluent are reached, and the polluted effluent is released uncontrolled into the environment. Based on the studies, MP retention from the WWTP could be estimated to be approximately 96%. Few trends in polymer type or mass contents were detected within the different fractions of the samples or when comparing samples to each other.
KW - Microplastics
KW - Microplastic analysis
KW - TED-GC/MS
KW - Microplastic pathways
KW - Mass contents
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-568289
DO - https://doi.org/doi.org/10.1002/appl.202200078
SP - 1
EP - 10
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-56828
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Pauw, Brian Richard
T1 - Holistic Experimentation in the HExX-Lab
N2 - Through bottom-up, comprehensive digitalisation of all aspects of an experiment, the HEX-lab improves the trustworthiness (traceability, reproducibility, quality) of scientific findings.
The five main parts that make up a materials science experiment, i.e. Sample preparation, Measurements, Processing, Analysis, and Interpretation, each have been addressed in thorough and unique ways in this lab, building up a foundation for a wide range of materials science collaborations. Improvements span the spectrum.
Hardware developments include new sample environments and stages, such as grazing incidence motion towers, electrochemistry cells and flow-through holders, electronic components such as safety interlocks and multipurpose I/O controllers, and liquid handling systems such as coolant flow cross-over systems.
Software developments include:
1) a new comprehensive control system operating on both the RoWaN as well as the MOUSE allowing for full Python control and sequencing of all experimentation,
2) Automated scripts for instrument optimization, sample alignments and measurements,
3) revamped data pipelines and analysis software, standalone or launched as part of operations sequencing dashboards on servers, and
4) meticulously structured archival datafiles, fully documenting sample preparation, measurements, processing and analyses. These allow for holistic databases and dashboards to be constructed to investigate the links between synthesis parameters and resulting morphology.
This poster will highlight some of the tools and techniques developed and available in the HEX-lab over the years, from sample environments to overarching experiment and data organisation structures.
T2 - Materials Science Core Facility Synergy Forum 2025
CY - Bremen, Germany
DA - 26.02.2025
KW - Digitalization
KW - Holistic experiments
KW - Traceability
KW - Data provenance
PY - 2025
AN - OPUS4-62675
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Falqueto, J. B.
A1 - Clark, A. H.
A1 - Štefančič, A.
A1 - Smales, Glen Jacob
A1 - Vaz, C. A. F.
A1 - Schuler, A. J.
A1 - Bocchi, N.
A1 - Kazzi, M. E.
T1 - High performance doped Li-rich Li1+xMn2–xO4 cathodes nanoparticles synthesized by facile, fast, and efficient microwave-assisted hydrothermal route
N2 - Li-rich nanoparticles of Li1+xMn2–xO4 doped with Al, Co, or Ni are successfully synthesized using a facile, fast, and efficient microwave-assisted hydrothermal route. Synchrotron X-ray diffraction confirms the formation of the crystalline cubic spinel phase type. X-ray absorption spectroscopy analysis at the Co and Ni K- and L-edges verifies that the dopants are within the Li1+xMn2–xO4 spinel structure and are inactive during cycling in the bulk and at the surface. Moreover, we demonstrate that nanocrystallinity and cationic doping play an important role in improving the electrochemical performance with respect to LiMn2O4 microparticles. They significantly reduce the charge-transfer resistance, lower the first cycle irreversible capacity loss to 6%, and achieve a capacity retention between 85 and 90% after 380 cycles, with excellent Coulombic efficiency close to 99% without compromising the specific charge at a 5C cycling rate. Furthermore, the Mn K- and L-edges attest that after long cycling, the Mn oxidation state in the bulk differs from that at the surface caused by the Mn disproportion reaction; however, the cationic doping helps mitigate the Mn dissolution with respect to the undoped Li1+xMn2–xO4 nanoparticles, as indicated by inductively coupled plasma atomic emission spectrometry.
KW - XAS
KW - SAXS
KW - Li-ion battery
KW - Cathode material
KW - Spinel
KW - The MOUSE
PY - 2022
DO - https://doi.org/10.1021/acsaem.2c00902
SN - 2574-0962
VL - 5
IS - 7
SP - 8357
EP - 8370
PB - ACS Publ.
CY - Washington, DC
AN - OPUS4-55359
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Drago, C
A1 - Wiesner, Yosri
A1 - Braun, U
A1 - Giovannozi, A
A1 - Fadda, M
A1 - Putzu, Mara
A1 - Lorenzo, S
A1 - Moscoso-Pérez, C
A1 - Benismail, N
A1 - Palma, C
A1 - Almeida, J
A1 - Mattarozzi, M
A1 - Barbaresi, M
A1 - Piergiovanni, M
A1 - Masino, M
A1 - Bianchi, F
A1 - Careri, M
A1 - v Bavel, B
A1 - Maltseva, A
A1 - Sillanpää, M
A1 - Pröfrock, D
A1 - Wippermann, D
A1 - Altmann, Korinna
T1 - Harmonisation of sample preparation for microplastic analysis: Recovery rates of tablets containing microplastics as reference material for food and environmental matrix
N2 - Microplastic are found ubiquitarians in the environment and food products. Up to now, their impact of risks on health and environment is still controversially discussed, but based on the precautionary principle alone, their presence should be monitored and emission should be reduced (see here also the status of existing EU regulations ). The crucial point is not only the reduction of microplastics pollution but also the introduction of legally binding, standardized procedures for their analysis.
The limited availability of certified reference material as well as absence of standard operating procedures to identify, characterize and quantify microplastics according to number and mass have generated lack of comparability between different analytical methods and laboratories; but also, the need of time-consuming development of own protocols for each laboratory. Further on, harmonisation and standardisation of microplastics analysis requires specific reference materials that are used to validate the measurement and to ensure the comparability of results.
In the first step, we developed tablets of a water-soluble matrix, containing defined numbers of microplastic particles or mass contents. These can be solved in water and can be handled as reference materials in bottled drinking water without additional sample preparation. These samples can be measured, using mass-based methods as thermo-analytical methods like thermal desorption-gas chromatography-mass spectrometry (TED-GC/MS) or pyrolysis–gas chromatography–mass spectrometry (Py-GC/MS) and using umber-based methods as vibrational spectroscopy like Infrared and Raman directly after filtration.
The aim of this work was to delevop standard operating procedure to measure microplastics in more complex matrices and to harmonise and compare different detection and characterization methods. In fact, these matrices require different additional treatments to allow a reliable quantification and identification of microplastics.
T2 - SETAC Europe 2025
CY - Vienna, Austria
DA - 11.05.2025
KW - Microplastics
KW - Nanoplastics
PY - 2025
AN - OPUS4-63366
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Altmann, Korinna
T1 - Harmonisation efforts of the CUSP projects
N2 - The talk is about harmonisation approaches within CUSP. First the five H2020 projects for research on risk assessment regarding microplastics topic were presented. Secondly, harmonisation process were discussed.
T2 - VAMAS SC 47 Meeting
CY - Turin, Italy
DA - 19.10.2022
KW - Microplastics
KW - Harmonisation
KW - Nanoplastics
KW - H2020
KW - Risk assessment
PY - 2022
AN - OPUS4-56077
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
T1 - H2O-Initiated Polymerization of L-Lactide
N2 - Water-initiated ring-opening polymerizations (ROPs) of L-lactide (LA) were performed in bulk at 140 °C, whereupon 11 different salts or complexes of low-toxic metal ions such as tin (II), Zn(II), Zr(IV), and Bi(III) were used as catalysts. Only four catalysts gave satisfactory results despite a long reaction time (24 h). The influence of the temperature was studied with tin (II) 2-ethylhexanoate (SnOct2), dibutyltin oxide (Bu2SnO), and zinc bis-acetylacetonate (Zn(acac)2) and zirconium acetylacetonate (Zr(acac)4). With SnOct2, Bu2SnO and Zr(acac)4 the time was varied at 140 °C to compare their reactivity. Furthermore, two series of ROPs were carried out with variation of the LA/H2O ratio to verify the control of the molecular weight by the monomer-initiator ratio. Bi- or tri-modal molecular weight distributions (MWD) were found for most of the ROPs and bimodal melting endotherms in the differential scanning calorimetry (DSC) heating traces. The thickness and dependence of the 3D packing of the crystallites were monitored by small-angle X-ray scattering (SAXS) measurements.
KW - MALDI-TOF MS
KW - Polylactide
KW - Ring-opening polymerization
KW - Crystallization
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-628761
DO - https://doi.org/10.1007/s10924-025-03565-w
SN - 1572-8919
VL - 33
IS - 6
SP - 2843
EP - 2857
PB - Springer Science and Business Media LLC
CY - New York, NY
AN - OPUS4-62876
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Oksal-Kilinc, Sefine
A1 - Altmann, Korinna
A1 - Seiwert, Bettina
A1 - Reemtsma, Thorsten
A1 - Ruess, Liliane
T1 - Grinding method and oxidative aging modulate the impact of tire wear microplastics on the reproduction of the nematode C. elegans
N2 - Rationale Tire abrasion is one of the largest sources of microplastic in aquatic and terrestrial environments. Despite this fact, research on tire wear microplastic (TWP) and its effects on soil ecosystems is scarce, especially regarding natural weathering processes. This leaves a large knowledge gap on the interactions of TWP with soil biota. Methodology Cryo-milled tire tread (CMTT) and diamond-ground tire tread (DGTT) were artificially weathered through dry ozone treatment and heat exposure. Particles were analyzed via scanning electron microscopy, particle size distribution, and shape characterization. TWP leachate composition was examined using liquid chromatography–mass spectrometry. The impact on the reproduction of the nematode Caenorhabditis elegans, a widely used toxicological model, was tested for leachate concentration, exposure duration and TWP aging status, using offspring per adult as the endpoint. Results The comminution method significantly influenced TWP particle size distribution, with diamond grinding yielding smaller particles and a more structured surface morphology than cryo-milling. Aging with ozone (180 min) and heat (20 min at 100 °C) reduced DGTT particle sizes by 27-58%, but not in CMTT. Additionally, aging increased carboxylic functional groups and led to a brittle structure in both TWP types. Leachate composition varied with comminution method and aging. Benzothiazole, N-Cyclo-N-phenylurea, and aniline were more abundant in pristine and aged CMTT and aged DGTT. Diphenylguanidine had the highest concentration in all leachates. Aged TWP leachates, regardless of comminution, had significant toxic effects on C. elegans. Leachate from pristine CMTT was more toxic than from pristine DGTT. Nematode offspring correlated negatively with ozone exposure duration in aged DGTT. Tests with aged CMTT leachate showed even short-term exposure reduced offspring numbers. Discussion The results underscore the importance of oxidative and mechanical weathering in TWP toxicity and challenge the use of pristine particles in toxicological assays for risk assessment in the natural environment.
KW - Microplastics
KW - Tire abrasion
KW - Environment
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-654672
DO - https://doi.org/10.1071/EN25051
SN - 1448-2517
VL - 23
IS - 2
SP - 1
EP - 16
PB - CSIRO Publishing
AN - OPUS4-65467
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Guerra, M.F.
A1 - Neri, E.
A1 - Radtke, Martin
T1 - Gold leaf tesserae: tracing the origins of gold using synchrotron-based techniques
N2 - To gain insight into the possible origin of the gold used in the production of tesserae containing gold leaf less than 0.5 μm thick placed between two layers of glass, we propose a non-destructive synchrotron radiation (SR) XRF protocol based on sequential analysis under optimised analytical conditions. Using this protocol, trace element analysis is achieved with detection limits of 1–6 mg/kg. As Pt and Au have adjacent fluorescence energies, we tested the most challenging situation, when Pt is present in very low concentrations in gold. Data obtained by double-dispersive XRF (D2XRF) and μXRF for fourth–ninth-century mosaics decorating nine Eastern and Western religious buildings show that the Eastern and Western tesserae are made from different alloys.
However, these alloys are identical to those used to make gold leaf for gilding, because plastic deformation requires the use of gold alloys with high ductility and malleability. Although trace element composition of gold used in the concerned period is only available for coins, by comparing the amounts of Pt contained in the tesserae and in the coins we show that Roman tesserae are made from Roman gold, as described in the documentary sources. We observe for the Byzantine period the use of a Byzantine gold and of gold supposedly from different stages of recycling, and we suggest the use of Umayyad and Abbasid gold for the production of Islamic tesserae.
KW - Gold
KW - XRF
KW - Synchrotron
KW - BAMline
KW - D2XRF
KW - Tesserae
PY - 2023
DO - https://doi.org/10.1140/epjp/s13360-022-03638-y
SN - 2190-5444
VL - 138
IS - 2
SP - 1
EP - 15
AN - OPUS4-57208
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Pauw, Brian Richard
T1 - Glimpses of the future: Systematic investigations of 1200 mofs using a highly automated, full-stack materials research laboratory
N2 - By automatically recording as much information as possible in automated laboratory setups, reproducibility and traceability of experiments are vastly improved. This presentation shows what such an approach means for the quality of experiments in an X-ray scattering laboratory and an automated synthesis set-up.
T2 - Winter School on Metrology and Nanomaterials for Clean Energy
CY - Claviere, Italy
DA - 28.01.2024
KW - Digitalization
KW - Automation
KW - Digital laboratory
KW - Scattering
KW - Synthesis
KW - Nanomaterials
KW - Holistic science
PY - 2024
AN - OPUS4-59621
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Getting more efficient – The use of Bayesian optimization and Gaussian processes at the BAMline
N2 - For more than 20 years, BAM is operating the BAMline at the synchrotron BESSY II in Berlin Adlershof. During this time, the complexity of the setup and the amount of data generated have multiplied. To increase the effectiveness and in preparation for BESSY III, algorithms from the field of machine learning are increasingly used.
After a short introduction to BO and GP, the first example is the automatic alignment of our double multilayer monochromator (DMM).
The second example is the optimization of measurement time in XRF scanning.
T2 - SNI2022 conference
CY - Berlin, Germany
DA - 05.09.2022
KW - Artificial Inelligence
KW - Machine Learning
KW - Bayesian Statistics
KW - Gaussian process
KW - X-ray fluorescence
KW - BAMline
PY - 2022
AN - OPUS4-56255
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Getting more efficient – The use of Bayesian optimization and Gaussian processes at the BAMline
N2 - The BAMline, a beamline for material science research at BESSY II, has been operated by the Bundesanstalt für Materialforschung und -prüfung for over two decades. In the last few years, Bayesian optimization (BO) with Gaussian processes (GP) has been introduced as a transformative method in this setting. This contribution highlights the integration and impact of BO and GP in refining BAMline operations.
We will explore the impact of integrating Bayesian methods, especially when combined with Gaussian processes, on the operational efficiency of the BAMline. Our discussion commences with an overview of the fundamental concepts of active learning and optimization. This is followed by an in-depth analysis of specific case studies, drawing on our direct experience with these innovative methods.
For this our focus is on three key applications:
Alignment of Optical Elements (DCM and DMM): The implementation of
Bayesian optimization using Gaussian processes has revolutionized the
alignment process for the Double Crystal Monochromator (DCM) and the
Double Multilayer Monochromator (DMM). This approach greatly reduced
manual effort and enhanced the efficiency and effectiveness of the
alignment procedure.
Optimal Spot Selection for Spatial Mapping in XRF Studies: In X-ray
fluorescence (XRF) experiments, determining the most informative
sampling spots is crucial. The introduction of BO, informed by GP,
has significantly improved the selection process, especially in large
or heterogeneous samples. This methodology ensures maximum
information gain, optimizing the balance between comprehensive
mapping and resource management.
Selection of Optimal Energies for XANES Measurements in GEXANES
Geometry: In the specific context of X-ray Absorption Near Edge
Structure (XANES) studies using Grazing Exit (GEXANES) geometry, the
Bayesian approach with Gaussian processes is now utilized to identify
the most effective energy settings. This results in detailed spectral
data acquired in a much shorter time.
We also address challenges and limitations encountered during implementation. Additionally, the versatility of this approach in addressing a range of different research questions will be demonstrated.
T2 - Machine Learning Conference for X-Ray and Neutron-Based Experiments
CY - Garching bei München, Germany
DA - 08.04.2024
KW - BAMline
KW - Synchrotron
KW - XRF
KW - Bayes
PY - 2024
AN - OPUS4-61703
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Huang, Junhao
A1 - Klahn, Marcus
A1 - Tian, Xinxin
A1 - Bartling, Stephan
A1 - Zimina, Anna
A1 - Radtke, Martin
A1 - Rockstroh, Nils
A1 - Naliwajko, Pawel
A1 - Steinfeldt, Norbert
A1 - Peppel, Tim
A1 - Grunwaldt, Jan‐Dierk
A1 - Logsdail, Andrew J.
A1 - Jiao, Haijun
A1 - Strunk, Jennifer
T1 - Fundamental Structural and Electronic Understanding of Palladium Catalysts on Nitride and Oxide Supports
N2 - The nature of the support can fundamentally affect the function of a heterogeneous catalyst. For the novel type of isolated metal atom catalysts, sometimes referred to as single‐atom catalysts, systematic correlations are still rare. Here, we report a general finding that Pd on nitride supports (non‐metal and metal nitride) features a higher oxidation state compared to that on oxide supports (non‐metal and metal oxide). Through thorough oxidation state investigations by X‐ray absorption spectroscopy (XAS), X‐ray photoelectron spectroscopy (XPS), CO‐DRIFTS, and density functional theory (DFT) coupled with Bader charge analysis, it is found that Pd atoms prefer to interact with surface hydroxyl group to form a Pd(OH)x species on oxide supports, while on nitride supports, Pd atoms incorporate into the surface structure in the form of Pd−N bonds. Moreover, a correlation was built between the formal oxidation state and computational Bader charge, based on the periodic trend in electronegativity.
KW - BAmline
KW - XANES
KW - Catalyst
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-608341
DO - https://doi.org/10.1002/anie.202400174
SN - 1433-7851
VL - 63
IS - 20
SP - 1
EP - 9
PB - Wiley
AN - OPUS4-60834
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Pollard, M.
T1 - Functionalized Poly(ethylene glycol)s (PEGs) as a Reference Material for Detection of Polymeric end Groups via SEC Hyphenated with FTIR and 1H-NMR (80 MHz)
N2 - With the online coupling (or hyphenation) of chemically-resolved spectroscopy detection with classical size-exclusion chromatography (SEC) it is possible to correlate polymer molecular size with chemical structure in a single in-situ or on-flow measurement. Medium-resolution 1H-NMR (60 MHz) spectroscopy (i.e., “desktop NMR”) and Fouriertransform Infrared Spectroscopy (FTIR) have both been developed as coupled methods (SEC-MR-NMR, SEC-FTIR) for the detection of polymer analytes by monitoring e.g. alkene or carbonyl functionality.1,2 Here, we have investigated the potential for the detection of polymer end groups, using a slightly higher field-strength spectrometer (80 MHz 1H Larmor frequency) and taking advantage of a columnless injection method that provides bulk spectra for reference. End-functionalized polymers were synthesized by reaction of PEG with toluene isocyanate, yielding ,-functionalized polymers with exactly 2 IR- and NMR-detectable functional groups per chain, as proven by MALD-TOF mass spectrometry. We have investigated the sensitivity (limit of detection) and spectral resolution for these functional groups in chloroform, THF, and water. Results have demonstrated a good feasibility for the simultaneous online detection of PEG backbone (M~4000 g/mol) and these end groups at the level of ca. 2 mol%.
T2 - 33rd International Symposium on Chromatography
CY - Budapest
DA - 18.09.2022
KW - Size exclusion chromatography
KW - Polyethyleneglycol
KW - MALDI-TOF MS
KW - NMR
PY - 2022
AN - OPUS4-56716
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - From Egypt to Hiddensee – Analysis of Gold with Synchrotron Radiation V
N2 - Gold is one of the seven metals already known in antiquity and was used from time immemorial as a medium of exchange and for the production of jewelry because of its luster and rarity. In addition, it is easy to work and largely resistant to chemical influences. Investigations of gold using synchrotron radiation excited X-ray fluorescence analysis are non-destructive and provide information about the chemical elements present in the sample under investigation. The investigations presented here at BAMline focus on questions such as the origin, manufacturing process, and association of gold findings. The different questions are explained by a number of examples ranging from the Viking treasure from Hiddensee to the Nebra Sky Disk and finds from Egypt. The find from Bernstorf is discussed in detail. A Bayesian treatment of the authenticity is shown.
T2 - Ringvorlesung Einführung in die Archäometrie
CY - Berlin, Germany
DA - 01.11.2024
KW - Gold
KW - Synchrotron
KW - XRF
KW - BAMline
KW - Bayes
PY - 2024
AN - OPUS4-61699
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - From Egypt to Hiddensee – Analysis of Gold with Synchrotron Radiation IV
N2 - Gold is one of the seven metals already known in antiquity and was used from time immemorial as a medium of exchange and for the production of jewelry because of its luster and rarity. In addition, it is easy to work and largely resistant to chemical influences. Investigations of gold using synchrotron radiation excited X-ray fluorescence analysis are non-destructive and provide information about the chemical elements present in the sample under investigation. The investigations presented here at BAMline focus on questions such as the origin, manufacturing process, and association of gold findings. The different questions are explained by a number of examples ranging from the Viking treasure from Hiddensee to the Nebra Sky Disk and finds from Egypt. The find from Bernstorf is discussed in detail. A Bayesian treatment of the authenticity is shown.
T2 - Ringvorlesung Einführung in die Archäometrie
CY - Berlin, Germany
DA - 04.11.2022
KW - Synchrotron
KW - BAMline
KW - Bayesian Statistics
KW - Gold
KW - Röntgenfluoreszenz
PY - 2022
AN - OPUS4-56252
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Martins, Ines
A1 - Al-Sabbagh, Dominik
A1 - Bentrup, U.
A1 - Marquardt, Julien
A1 - Schmid, Thomas
A1 - Scoppola, E.
A1 - Kraus, Werner
A1 - Stawski, Tomasz
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Yusenko, Kirill
A1 - Weidner, Steffen
A1 - Emmerling, Franziska
T1 - Formation Mechanism of a Nano-Ring of Bismuth Cations and Mono-Lacunary Keggin-Type Phosphomolybdate
N2 - A new hetero-bimetallic polyoxometalate (POM) nano-ring was synthesized in a one-pot procedure. The structure consists of tetrameric units containing four bismuth-substituted monolacunary Keggin anions including distorted [BiO8] cubes. The nano-ring is formed via self-assembly from metal precursors in aqueous acidic medium. The compound (NH4)16[(BiPMo11O39)4] ⋅ 22 H2O; (P4Bi4Mo44) was characterized by single-crystal X-ray diffraction, extended X-ray absorption fine structure spectroscopy (EXAFS), Raman spectroscopy, matrix-assisted laser desorption/ionisation-time of flight mass spectrometry (MALDI-TOF), and thermogravimetry/differential scanning calorimetry mass spectrometry (TG-DSC-MS). The formation of the nano-ring in solution was studied by time-resolved in situ small- and wide-angle X-ray scattering (SAXS/WAXS) and in situ EXAFS measurements at the Mo−K and the Bi−L3 edge indicating a two-step process consisting of condensation of Mo-anions and formation of Bi−Mo-units followed by a rapid self-assembly to yield the final tetrameric ring structure.
KW - Bismuth
KW - In situ EXAFS
KW - In situ SAXS/WAXS
KW - Lacunary Keggin ion
KW - Polyoxometalates
KW - Self-assembly
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-546823
DO - https://doi.org/10.1002/chem.202200079
SN - 0947-6539
VL - 28
IS - 27
SP - 1
EP - 7
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-54682
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Eisentraut, Paul
T1 - Fast quantitative detection of microplastics using TED-GC/MS, an innovative thermoanalytical method
N2 - Im Vortrag wird die BAM vorgestellt und die Motivation für Engagement im Feld der Mikroplastikanalysen dargelegt. Die Herausforderungen bei der Analyse werden aufgezeigt und der Umgang mit ihnen. Das Arbeitsprinzip der TED-GC/MS sowie Leistungsparameter werden erläutert sowie das Vorgehen zur Identifikation und Quantifizierung von Polymeren in er Umwelt. An ausgewählten Beispielen werden interessante Ergebnisse präsentiert und die Mikroplastikreferenzmaterialien der BAM vorgestellt.
N2 - In the talk, the BAM is introduced and the motivation for our engagement in the field of microplastic analysis is explained. The challenges in the analysis of microplastics are shown and how we deal with them. The working principle of TED-GC/MS and its performance parameters are presented, as well as the procedure for identifying and quantifying polymers in environmental samples. Interesting results are shown using selected examples. Finally, BAM's microplastic reference materials are highlighted.
T2 - National Environmental Monitoring Conference
CY - Online meeting
DA - 02.08.2021
KW - Microplastic
KW - TED-GC/MS
KW - Environmental analysis
PY - 2021
AN - OPUS4-53081
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Valentim Gelamo, Rogério
A1 - Bueno Leite, Natália
A1 - de Sousa Amadeu, Nader
A1 - Reis Pedreira Muniz Tavares, Michel
A1 - Oberschmidt, Dirk
A1 - Klemm, Sophie
A1 - Fleck, Claudia
A1 - Cakir, Cafer-Tufan
A1 - Radtke, Martin
A1 - Aparecido Moreto, Jéferson
T1 - Exploring the Nb2O5 coating deposited on the Ti-6Al-4V alloy by a novel GE-XANES technique and nanoindentation load-depth
N2 - This research group has been demonstrating the significant advantages of using Nb2O5 coatings for functionalizing titanium, aluminium, and stainless steels. Regarding the biomedical sector and considering Ti-6Al-4V alloy, the reactive sputtering technique improved the cell viability, the osteogenic performance of cells involved in the osseointegration process as well as the ability to delay bacterial proliferation. The characteristics of the Nb2O5 coatings were assessed before by using standard methods, which provide information only a few tens of nanometers depth. Given that the Nb2O5 coating fabricated in this work exhibits a thickness of approximately 300 nm, the GE-XANES technique emerges as the most suitable method for this analysis. Additional information was provided with the aid of nanoindentation load-depth (P-h) curves. GE-XANES results indicated the formation of a homogeneous layer of Nb2O5 coating on the Ti-6Al-4V surfaces. The deposition process improved the surface hardness of the Ti-6Al-4V alloy (4.38 GPa versus 5.62 GPa) considering the 2 mN load.
KW - BAMline
KW - GE-XANES
KW - Synchrotron
PY - 2024
DO - https://doi.org/10.1016/j.matlet.2023.135584
SN - 0167-577X
VL - 355
SP - 1
EP - 4
PB - Elsevier B.V.
AN - OPUS4-60835
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Lilensten, L.
A1 - Provost, K.
A1 - Perrière, L.
A1 - Fonda, E.
A1 - Couzinié, J.
A1 - Amman, F.
A1 - Radtke, Martin
A1 - Dirras, G.
A1 - Guillot, I.
T1 - Experimental investigation of the local environment and lattice distortion in refractory medium entropy alloys
N2 - EXAFS analysis of pure elements, binary and ternary equiatomic refractory alloys within the Nb-Zr-Ti-Hf- Ta system is performed at the Nb and Zr K-edges to analyze the evolution of the chemical local environ- ment and the lattice distortion. A good mixing of the elements is found at the atomic scale. For some compounds, a distribution of distances between the central atom and its neighbors suggests a distortion of the structure. Finally, analysis of the Debye-Waller parameters shows some correlation with the lat- tice distortion parameter δ², and allows to quantify experimentally the static disorder in medium entropy alloys.
KW - BAMline
KW - Refractory alloys
KW - EXAFS
KW - Debye-Waller parameter
PY - 2022
DO - https://doi.org/10.1016/j.scriptamat.2022.114532
SN - 1359-6462
VL - 211
SP - 1
EP - 6
PB - Elsevier Ltd.
AN - OPUS4-55287
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - GEN
A1 - Pauw, Brian Richard
A1 - Smales, Glen Jacob
A1 - Moeez, A.
A1 - Hörmann, Anja
A1 - Breßler, Ingo
T1 - Example configurations and test cases for the Python HDF5Translator framework.
N2 - This is a set of use examples for the HDF5Translator framework. This framework lets you translate measurement files into a different (e.g. NeXus-compatible) structure, with some optional checks and conversions on the way. For an in-depth look at what it does, there is a blog post here.
The use examples provided herein are each accompanied by the measurement data necessary to test and replicate the conversion. The README.md files in each example show the steps necessary to do the conversion for each.
We encourage those who have used or adapted one or more of these exampes to create their own conversion, to get in touch with us so we may add your example to the set.
KW - Measurement data conversion
KW - Data conversion
KW - HDF5
KW - NeXus
KW - NXsas
KW - Framework
KW - Python
PY - 2024
DO - https://doi.org/10.5281/zenodo.10925971
PB - Zenodo
CY - Geneva
AN - OPUS4-59796
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Dinter, Adelina-Elisa
T1 - Examination of biological samples by means of single-cell ICP-ToF-MS
N2 - Up to now, different analytical methods for single cell analysis exist focusing on key features such as size, shape, morphology and elemental composition. The combination of the latest ICP-MS techniques - ICP-ToF-MS - together with the latest developments in the field of sample delivery - micro droplet generator (MDG) – will allow a Deep insight into the composition and size of cells.
Microbiologically influenced corrosion (MIC) is an oxidation of metals affected by the presence or activity (or both) of microorganisms e.g. Shewanella Putrefaciens in biofilms on the surface of the corroding material. As this can happen for example in the soil on iron pipes of water pipes, in oil tanks or on steel sheet piling, there is great interest in MIC research, not only from various industrial sectors, but also from the environmental aspect.
T2 - SALSA - Make & Measure
CY - Online Meeting
DA - 15.10.2020
KW - SC-ICP-ToF-MS
KW - Single cell analysis
KW - MDG ICP-ToF-MS
KW - Microdroplet generator
PY - 2020
AN - OPUS4-52441
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Miclea, P-T
T1 - Evaluation of Toxicological Characteristics of Airborne Nano/Microplastic Particles From the Industrial Environment
N2 - Micro and nano plastic (MNPs) particles and fibres represent a global scale contamination source with hazard potential. They can be identified all around our environment, even in air, soil and water. One of the major global MNPs polluters is the textile industry, which generates plastic particles (nylon, polyester, polyurethane, polyolefin, acrylic etc.) during the manufacturing processes. The study analyses the level of particle concentration outside a company that processes textile yarns, but also from the proximity of workplaces using an online air samplers with cascade and mono filter holders for silicon (Si) and quartz filters, respectively. A laser detector was used for real- time counting of particles of six size classes (PM0.3-PM10). Silicon (Si) filters with a diameter of 9 mm and pore sizes of 10 µm and 1 µm and quartz filters with a diameter of 25 mm and a pore size of 1.2 µm were used for particle sampling. A special holder was designed and made for selective sampling (PM10 and PM1.0) on Si filters. Quartz filters were pre-calcined (8000C) before collection. Sampling parameters: airflow (GilAir Plus pump) -2 l/m3, collection time -3 hours; starting time 7.00 am (T1)/2.00 pm (T2), intermittent natural ventilation, average temperature and humidity: 23.3 0C, RH: 52.5%. The weight of particles collected (µg) on the quart filters was 4.9E-05 (T1) and 5.1E-05 (T2) and on the Si filters 3,2 E-05(T1) and 5E-06(T2). The total number of the outside particles (PM0,3-PM10) was situated between 3584,58 (T1)-15165,05(T2) and inside 9901(T1) and 12921,61(T2). The highest number of PM 10 particles inside was 72/m3 and of PM0.3 particles 71979/m3. The samples were characterized using electron microscopy and µRaman spectroscopy. All samples showed a high concentration of particles on the filter. Samples show only particles with irregular shapes. The equivalent particle diameter was for PM10: 1-5 µm and PM1<1 µm. The total Ion Chromatogram shows the presence of PET-type polymer and the TED GS-MS analysis shows that the weight of the collected particles is PET. After extracting the particles from the quartz filters, they were tested for evaluation of the cytotoxic potential of preparations on human monocyte-macrophage cell cultures and peripheral lymphocytes. In the first case, the level of cytotoxicity was at the border between non-cytotoxic and cytotoxic and in the second test the result was moderate cytotoxic.
T2 - SETAC Europe 2025
CY - Vienna, Austria
DA - 11.05.2025
KW - Microplastics
KW - TED-GC/MS
KW - Nanoplastics
KW - Raman microscopy
PY - 2025
AN - OPUS4-63378
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Goedecke, Caroline
A1 - Dittmann, Daniel
A1 - Eisentraut, Paul
A1 - Wiesner, Yosri
A1 - Schartel, Bernhard
A1 - Klack, Patrick
A1 - Braun, Ulrike
T1 - Evaluation of thermoanalytical methods equipped with evolved gas analysis for the detection of microplastic in environmental samples
N2 - Microplastic particles are currently detected in almost all environmental compartments. The results of detection vary widely, as a multitude of very different methods are used with very different requirements for analytical validity.
In this work four thermoanalytical methods are compared and their advantages and limitations are discussed. One of them is thermal extraction-desorption gas chromatography mass spectrometry (TED-GC/MS), an analysis method for microplastic detection that has become established in recent years. In addition, thermogravimetric analysis coupled with Fourier-transform infrared spectroscopy (TGA-FTIR) and mass spectrometry (TGA-MS) were applied, two methods that are less common in this field but are still used in other research areas. Finally, microscale combustion calorimeter (MCC) was applied, a method not yet used for microplastic detection.
The presented results are taken from a recently published interlaboratory comparison test by Becker et al. (2020). Here a reference material consisting of suspended matter and specified added polymer masses was examined, and only the results of the recoveries were presented. In the present paper, however, the results for the individual polymers are discussed in detail and individual perspectives for all instruments are shown.
It was found that TED-GC/MS is the most suitable method for samples with unknown matrix and unknown, variable kinds and contents of microplastic. TGA-FTIR is a robust method for samples with known matrix and with defined kinds of microplastic. TGA-MS may offer a solution for the detection of PVC particles in the future. MCC can be used as a very fast and simple screening method for the identification of a potential microplastic load of standard polymers in unknown samples.
KW - Microplastic
KW - TED-GC/MS
KW - TGA-MS
KW - TGA-FTIR
KW - MCC
KW - Thermal analysis
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-516687
DO - https://doi.org/10.1016/j.jaap.2020.104961
VL - 152
SP - 104961
PB - Elsevier B.V.
AN - OPUS4-51668
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Wiesner, Yosri
T1 - Erfassung von Degradationsprodukten und Additiven sowie temperaturspezifische Pyrolyseprodukte mittels TED-GC/MS
N2 - Im der Präsentation werden, neben der Möglichkeit der Mikroplastikquantifizierung, auf weitere Anwendungsfelder der Methode TED-GC/MS eigegangen. Dies beinhaltet die Erfassung von Degradationsprodukten UV/O2 geschädigter Polymere und die Detektion von Additiven. Die Optimierung der Methode betreffend Messzeit und materialspezifischer Messanforderung sind ebenfalls Gegenstand.
T2 - Kolloquium Massenspektrometrie von Polymeren
CY - Berlin, Germany
DA - 09.05.2023
KW - TED-GC/MS
KW - Polymere
KW - Degradation
KW - Additive
PY - 2023
AN - OPUS4-57480
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Cakir, Cafer Tufan
T1 - Enhancing the Efficiency and Accessibility of Grazing Exit X-ray Absorption Spectroscopy for Corrosion and Layered Materials Analysis
N2 - In the field of materials science, there is a critical need for efficient and effective characterization techniques, especially in the investigation of corrosion processes of compositionally complex alloys (CCAs) or the analysis of layered structures. This talk presents an advanced approach that combines grazing-exit X-ray absorption near-edge structure spectroscopy (GE-XANES) with Bayesian optimization (BO) to significantly improve the efficiency of data acquisition while retaining the depth-resolved, element-specific analysis capabilities that are critical for studying these materials under ambient conditions. Using a non-destructive, scan-free GE-XANES setup coupled with a pnCCD detector and grazing exit X-ray fluorescence spectroscopy (GE-XRF) geometry, our method enables precise analysis at sub-micrometer depths without the need for high vacuum environments or extensive sample preparation. The integration of BO reduces experimental time by a factor of 50, overcoming the practical limitations of conventional GE-XANES and increasing its applicability in the study of surface catalysis and corrosion processes. We validate this optimized approach through comparative studies on a CrCoNi alloy and a reference layered sample, demonstrating its potential to revolutionize materials analysis by increasing both efficiency and accessibility.
T2 - Gesellschaft Deutscher Chemiker (GDCh)
CY - Clausthal-Zellerfeld, Germany
DA - 20.06.2024
KW - GEXRF
KW - GEXANE
KW - ML
PY - 2024
AN - OPUS4-61788
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Enhancing efficiency at bamline: employing data science and machine learning for x-ray research
N2 - This talk discusses how data science and machine learning techniques are being applied at the BAM Federal Institute for Materials Research and Testing to enhance efficiency and automation at the BAMLine synchrotron facility. The methods presented include Gaussian processes and Bayesian optimization for beamline adjustment and optimization of X-ray measurements. These statistical techniques allow automated alignment of beamline components and active learning scanning to reduce measurement time.
Additional machine learning methods covered are neural networks for quantification of X-ray fluorescence (XRF) data and decoding coded apertures.
T2 - 17th International Work-Conference on Artificial Neural Networks (IWANN2023)
CY - Ponta Delgada, Portugal
DA - 19.06.2023
KW - Bayesian Optimization
KW - Gaussian Process
KW - BAMline
PY - 2023
AN - OPUS4-58605
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Energy Resolved Imaging with Coded Apertures
N2 - Our aim is to develop a simple and inexpensive method for full field X-ray fluorescence imaging.We combine an energydispersive array detector with a coded aperture to obtain high resolut ion images. To obtain the information from the recorded image a reconstruction step is necessary. The reconstruction methods we have developed, were tested on simulated data and then applied to experimental data. The first tests were carried out at the BAMline @BESSY II. This method enables the simultaneous detection of multiple elements,which is important e.g. in the field of catalysis.
T2 - SRI 2021
CY - Online meeting
DA - 28.3.2022
KW - Synchrotron
KW - BAMline
KW - Machine Learning
KW - Coded Aperture
PY - 2022
AN - OPUS4-56298
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Fittschen, U.
A1 - Lutz, C.
T1 - Element Species Determination in Polymer Electrolyte Membranes
N2 - Polymer electrolyte membranes (PEM) are polymers which act as separator in an electrochemical cell and allow ionic charge flow to close the circuit. Widely used membranes are perfluorinated sulfonic-acid (PFSA) ionomers (e.g. Nafion™), a class of ion-conducting polymers with remarkable ion conductivity and chemical-mechanical stability. A nanoscopic water system around the sulfonic acid capped side-chains of the otherwise hydrophobic polymer allows the ion transport. Only approx. 14 molecules of water per sulfonic group are present in the fully hydrated state. In vanadium redox flow batteries (VRFB) ideally only protons are transported. The weak ion selectivity of Nafion™ is the main cause for the transportation of vanadium, briefly vanadium crossover, in VRFBs a system we have investigated more closely, lately. The consequences of crossover are a concentration imbalance and a self-discharge of the battery, which leads to a decrease of the capacity. The development of efficient energy storage systems is crucial for the transformation towards a renewable energy based economy. The VRFB has a great potential as a commercial electrochemical energy storage system due to properties including, but not limited to, no cross-contamination, a long cycle-life and a theoretically unlimited capacity. VRFB consists of two half-cells, which are linked to electrolyte tanks and separated by a membrane. The membrane plays a major role in overall cell performance. So far, vanadium transportation models, which include diffusion, migration, electroosmotic convection and pressure gradients, are inconsistent. There is no agreement in the literature on the diffusion coefficients of vanadium species (e.g. published diffusion coefficients of V2+ are located between 3.13·10-12 m²s-1 and 9.44·10-12 m²s-1) indicate that thevanadium crossover is not well understood and there is a lack on a more fundamental level. Since the membrane transport is the rate-determining step of the crossover as well as of the proton exchange it is extremely important to understand these phenomena on a fundamental level. This will eventually allow us to design better membranes. Alternative materials need to show equivalent performance compared with Nafion™ and ideally be more selective regarding ion cross-membrane transport.There are several options to approach the chemistry i.e. the interaction of dissolved and bound ions inside the confined water body of ionomeric membranes. Vanadium ions are a versatile model as UV/VIS data can be used to distinguish between the 5 species V2+, V3+, VO2+, VO2+ and V2O33+ of the electrolyte. Infrared spectroscopy has been applied to study the interaction of sulfonic groups and the ions. Molecular dynamic modeling is another approach to study the distribution and distances of ions. We now introduce X-ray absorption near edge structure spectroscopy (XANES) to study species and species changes inside Nafion™ and a novel membrane based on poly(1,1-difluoroethylene) (PVDF). We evaluated the methods and investigated the influence of irradiation, temperature and hydration on the measurements.
T2 - Denver X-Ray Conference
CY - Online meeting
DA - 03.08.2020
KW - Batteries
KW - BAMline
KW - XANES
PY - 2020
AN - OPUS4-51910
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Riedel, Soraya
A1 - Hülagü, Deniz
A1 - Bennet, Francesca
A1 - Carl, Peter
A1 - Flemig, Sabine
A1 - Schmid, Thomas
A1 - Schenk, J. A.
A1 - Hodoroaba, Vasile-Dan
A1 - Schneider, Rudolf
T1 - Electrochemical Immunomagnetic Ochratoxin A Sensing: Steps Forward in the Application of 3,3’,5,5’- Tetramethylbenzidine in Amperometric Assays
N2 - Electrochemical methods offer great promise in meeting the demand for user-friendly on-site devices for Monitoring important parameters. The food industry often runs own lab procedures, for example, for mycotoxin analysis, but it is a major goal to simplify analysis, linking analytical methods with smart technologies. Enzyme-linked immunosorbent assays, with photometric detection of 3,3’,5,5’-tetramethylbenzidine (TMB),form a good basis for sensitive detection. To provide a straightforward approach for the miniaturization of the detectionstep, we have studied the pitfalls of the electrochemical TMB detection. By cyclic voltammetry it was found that the TMB electrochemistry is strongly dependent on the pH and the electrode material. A stable electrode response to TMB could be achieved at pH 1 on gold electrodes. We created a smartphonebased, electrochemical, immunomagnetic assay for the detection of ochratoxin A in real samples, providing a solid basis forsensing of further analytes.
KW - Ochratoxin A
KW - Amperometry
KW - Cyclic voltammetry
KW - Electrochemistry
KW - Immunoassay
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530421
DO - https://doi.org/10.1002/celc.202100446
N1 - Geburtsname von Riedel, Soraya: Höfs, S. - Birth name of Riedel, Soraya: Höfs, S.
VL - 8
IS - 13
SP - 2597
EP - 2606
AN - OPUS4-53042
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Dalgic, Mete-Sungur
T1 - Einfluss der Konformation auf das Ionisationsverhalten in MALDI-TOF MS
N2 - MALDI-TOF Massenspektrometrie ist eine wichtige Methode zur Bestimmung von Molekulargewichten von Polymeren. Jedoch wird die quantitative Analyse von Polymeren durch verschiedene Faktoren erschwert. In dieser Präsentation wird unter anderem der Einfluss der molaren Massen auf die Massenspektren näher betrachtet. Dabei werden Konturplots von ternären PMMA- und PS-Mischungen gezeigt.
T2 - 27. Kolloquium - Massenspetrometrische von Polymeren
CY - Berlin, Germany
DA - 09.05.2023
KW - MALDI-TOF MS
KW - Ternäre Polymermischungen
KW - PMMA und PS
PY - 2023
AN - OPUS4-62214
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dobosy, Péter
A1 - Nguyen, Hoang Thi Phuong
A1 - Záray, Gyula
A1 - Streli, Christina
A1 - Ingerle, Dieter
A1 - Ziegler, Philipp
A1 - Radtke, Martin
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Endrédi, Anett
A1 - Fodor, Ferenc
T1 - Effect of iodine species on biofortification of iodine in cabbage plants cultivated in hydroponic cultures
N2 - Iodine is an essential trace element in the human diet because it is involved in the synthesis of thyroid hormones. Iodine deficiency affects over 2.2 billion people worldwide, making it a significant challenge to find plant-based sources of iodine that meet the recommended daily intake of this trace element. In this study, cabbage plants were cultivated in a hydroponic system containing iodine at concentrations ranging from 0.01 to 1.0 mg/L in the form of potassium iodide or potassium iodate. During the experiments, plant physiological parameters, biomass production, and concentration changes of iodine and selected microelements in different plant parts were investigated. In addition, the oxidation state of the accumulated iodine in root samples was determined. Results showed that iodine addition had no effect on photosynthetic efficiency and chlorophyll content. Iodide treatment did not considerably stimulate biomass production but iodate treatment increased it at concentrations less than 0.5 mg/L. Increasing iodine concentrations in the nutrient solutions increased iodine content in all plant parts; however, the iodide treatment was 2–7 times more efficient than the iodate treatment. It was concluded, that iodide addition was more favourable on the target element accumulation, however, it should be highlighted that application of this chemical form in nutrient solution decreased the concetrations of selected micoelement concentration comparing with the control plants. It was established that iodate was reduced to iodide during its uptake in cabbage roots, which means that independently from the oxidation number of iodine (+ 5, − 1) applied in the nutrient solutions, the reduced form of target element was transported to the aerial and edible tissues.
KW - BAMline
KW - XANES
KW - Synchrotron
KW - Lodine
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-608330
DO - https://doi.org/10.1038/s41598-024-66575-z
VL - 14
IS - 1
SP - 1
EP - 12
PB - Springer Science and Business Media LLC
AN - OPUS4-60833
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Hahn, Marc Benjamin
T1 - DNA based Reference Materials: In Biodosimetry and Pharmaceutical Quality Control
N2 - Applications of plasmid DNA base reference materials in dosimetry and pharmaceutical research.
T2 - Physical and Chemical Analysis of Polymers seminar
CY - Online meeting
DA - 29.03.2021
KW - Analytic
KW - Certification
KW - DNA
KW - Dosimetry
KW - Homogeneity
KW - Quality testing
KW - Reference material
KW - Referenzmaterialien
KW - Stability
KW - Dose
KW - Radiation
KW - Pharmacy
KW - Electrohpresis
PY - 2021
AN - OPUS4-52361
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Dalgic, Mete-Sungur
T1 - Discrimination effects in MALDI-MS of Ternary Polymer Mixtures
N2 - MALDI-TOF MS is a viable method to determine molecular weights of polymers. However, quantification using MALDI-TOF MS presents specific challenges due to intensity biases caused by instrumental and sample-specific parameters. In this presentation, the influence of molar masses on MALDI-TOF mass spectra is explored. The intensities of a ternary PMMA blend with different mixture ratios are depicted in contour plots.
T2 - SALSA Make and Measure 2022
CY - Berlin, Germany
DA - 15.09.2022
KW - MALDI-TOF MS
KW - Ternary polymer blends
KW - PMMA
PY - 2022
AN - OPUS4-62212
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Cakir, Cafer Tufan
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Radtke, Martin
T1 - Digital Twin for Multimodal Synchrotron Experiments
N2 - In this contribution, I present a digital twin-based workflow designed to optimize experimental parameters in X-ray emission spectroscopy (XES), with a focus on reproducibility, data integration, and alignment with FAIR (Findable, Accessible, Interoperable, Reusable) principles in materials science and engineering (MSE). The developed pipeline begins with automated retrieval of crystallographic information from the Materials Project database based on a given sample composition. This structural data is then used to simulate the corresponding XES spectra using FDMNES, allowing for accurate prediction of element-specific emission lines.
The simulated emission lines are fed into an X-ray tracing (XRT) module, which builds a virtual replica of the experimental setup. This digital twin environment enables predictive modeling of spectrometer performance based on geometric configurations. The optimization focuses on two key parameters: the choice of the analyzing crystal and the distance between the sample and crystal (which also defines the crystal–detector distance due to Bragg condition constraints). An active learning algorithm is employed to iteratively adjust these parameters in order to achieve a desired energy-per-pixel (E/pixel) resolution with minimal intensity loss, enabling efficient, data-driven experimental planning.
By integrating data-driven simulations with real-time optimization strategies, this workflow supports efficient experiment planning while minimizing resource consumption and human error. Furthermore, all stages of the process—from data collection and simulation to optimization and visualization—are structured to ensure traceability and interoperability, facilitating future reuse and collaborative research.
I hope this contribution aligns well with the topic “Workflows for FAIR MSE Data” and offers a concrete example of how digital twins can be harnessed to improve the design, execution, and documentation of spectroscopy experiments in the MSE domain.
T2 - MSE Research Data Forum 2025
CY - Siegburg, Germany
DA - 08.07.2025
KW - Multi Modal
KW - XRD
KW - XRF
KW - Optimization
PY - 2025
AN - OPUS4-63794
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Dinter, Adelina-Elisa
T1 - Development of a single cell-ICP-ToF-MS-method for multielement analysis of MIC organisms grown on solid steel samples
N2 - The latest ICP-MS technology - ICP-ToF (time of flight)-MS – enables the analysis of the multi-element fingerprint of individual cells. The interface between material and environmental analysis thus receives special attention, e.g., when considering corrosion processes. Microbiologically influenced corrosion (MIC) is a highly unpredictable phenomenon due to the influence of the environment, microbial communities involved and the respective electron source. However, the interaction pathway between cells and the metal surface remains unclear. The development of the MIC-specific ICP-ToF-MS analytical method presented here at the single cell level, in combination with the investigation of steel-MIC interactions, contributes significantly to progress in instrumental MIC analysis and will enable clarification of the processes taking place. For this, a MIC-specific staining procedure was developed. It allows the analysis of archaea at a single cell level and provides information about the interaction of the cells with the staining agent which is extremely scarce compared to other well characterized organisms. Additionally, the single cell ICP-ToF-MS is used for the analysis of archaea involved in MIC of steel. Hence, the possible uptake of individual elements from different steel samples is investigated - the information obtained will be used in the future to elucidate underlying mechanisms and develop possible material protection concepts, thus combining modern methods of analytical sciences with materials.
T2 - DAAS Doktorandenseminar 2021
CY - Online meeting
DA - 20.09.2021
KW - Sc-ICP-ToF-MS
KW - Single cell analysis
KW - Microbiologically influenced corrosion
KW - Archaea
PY - 2021
AN - OPUS4-53340
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Dinter, Adelina-Elisa
T1 - Development of a MIC single archaea-ICP-ToF-MS-method for analysis of various elements in solid steel samples
N2 - ICP-ToF (Flugzeitanalysator, engl. time of flight)-MS ermöglicht den Multielement Fingerabdruck einzelner Zellen (single cell) zu analysieren. Die single cell-ICP-ToF-MS kommt bei dem vorgestellten Poster bei der Analyse von Archaeen, die an mikrobiell beeinflusster Korrosion (engl. microbiologically influenced corrosion, MIC) von Stahl eine Rolle spielen, zum Einsatz. Mittels sc-ICP-ToF-MS wird die mögliche Aufnahme von einzelnen Elementen aus dem jeweiligen Stahl untersucht – die erhaltenen Informationen fließen zukünftig in die Aufklärung zugrunde liegender Mechanismen sowie Entwicklung möglicher Materialschutzkonzepte ein. Die Arbeiten Verknüpfen moderne Methoden der Analytical Sciences mit Materialien.
T2 - Tag der Chemie 2021
CY - Online meeting
DA - 06.07.2021
KW - SC-ICP-ToF-MS
KW - Single cell analysis
KW - Microbiologically influenced corrosion
KW - Archaea
PY - 2021
AN - OPUS4-52941
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Müller, Axel
A1 - Altmann, Korinna
A1 - Kocher, B.
A1 - Braun, U.
T1 - Determination of tire wear markers in soil samples and their distribution in a roadside soil
N2 - Tire wear (TW) constitutes a significant source of microplastic in terrestrial ecosystems. It is known that particles emitted by roads can have an effect up to 100 m into adjacent areas. Here, we apply for the first-time thermal extraction desorption gas chromatography-mass spectrometry (TED-GC/MS) to determine TW in soil samples by detection of thermal decomposition products of styrene-butadiene rubber (SBR), without additional enrichment. Additionally, zinc contents were determined as an elemental marker for TW. Mixed soil samples were taken along three transects along a German motorway in 0.3, 2.0, and 5.0 m distance from the road. Sampling depths were 0–2, 2–5, 5–10, and 10–20 cm. Four fine fractions, 1 000–500, 500–100, 100–50, and <50 μm, were analyzed.
TW contents based on SBR ranged from 155 to 15 898 mg kg−1. TW contents based on zinc were between 413 and 44 812 mg kg−1. Comparison of individual values of SBR and zinc reveals SBR as a more specific marker. Results confirm that most TW ends up in the topsoil within a 2 m distance.
The sampling strategy resulted in representative data for a larger area. Standard deviations of quadruple TED-GC/MS determination of SBR were <10% for all grain size fractions. TED-GC/MS is a suitable analytical tool for determining TW in soil samples without the use of toxic chemicals, enrichment, or special sample preparation.
KW - Microplastic
KW - TED-GC/MS
KW - Tire wear
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-543344
DO - https://doi.org/10.1016/j.chemosphere.2022.133653
VL - 294
SP - 1
EP - 8
PB - Elsevier Ltd.
AN - OPUS4-54334
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wiesner, Yosri
A1 - Altmann, Korinna
A1 - Braun, U.
T1 - Determination of Microplastic Mass Content by Thermal Extraction Desorption Gas Chromatography– Mass Spectrometry
N2 - The scientific and practical challenge of detecting microplastics (MPs) in the environment in a targeted and rapid manner is solved by innovative coupling of thermogravimetric analysis with mass spectrometric methods.
Fast identification and quantitative determination of most thermoplastic polymers and elastomers is possible by using thermal extraction Desorption gas chromatography–mass spectrometry (TED-GC–MS).
KW - Microplastics
KW - Mikroplastik
KW - TED-GC/MS
KW - Microplastics analytic
KW - Mikroplastik Massegehalt
PY - 2021
VL - 17
IS - 3
SP - 2
EP - 7
PB - MultiMedia (UK) LLC
CY - Cranbury
AN - OPUS4-52570
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Altmann, Korinna
T1 - Detektion von Mikroplastik
N2 - In dem Vortrag geht es um die Möglichkeiten der Detektion von Mikroplastik im Allgemeinen. Es werden Beispiele für die Luft gezeigt.
T2 - VDI-Workshop „Mikroplastik in der Außenluft – Was wir wissen und was wir (noch) nicht wissen
CY - Online meeting
DA - 15.11.2022
KW - Mikroplastik
KW - Mikroplastik in Luft
KW - Detektion von Mikroplastik
PY - 2022
AN - OPUS4-56289
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Braun, U.
T1 - Detection of plastics in soil
N2 - Soil acts as a final sink for pollutants. Microplastics from different sources such as plastic mulching, littering, compost, sewage sludge, sedimentary deposition, and tyre abrasion are expected to be found in soil. However, representative and comprehensive information is missing on the sources, transport, and fate. Therefore, a reliable analysis method for microplastics in soils needs to be developed.
The presented work describes the development of a procedure for microplastics analysis in soils. A representative sampling based on the on-site conditions and a sample preparation method was established and comprised of a drying step, the separation of microplastic particles > 1 mm, and a density separation for particles < 1 mm. The detection of the large microplastic particles (> 1 mm) was conducted with Attenuated Total Reflection - Fourier Transform infrared Spectroscopy (ATR-FTIR) , while Thermal Extraction Desorption - Gas Chromatography / Mass Spectrometry (TED-GC/MS) was applied for particles < 1 mm, gaining information on the type of polymer and mass fraction. Based on the established method, 14 environmental soil samples ? with different exposure of microplastics from agriculture, industrial sites, roads, and floods were investigated.
Due to the arbitrary microplastic particle distribution among the samples for large microplastics, it was reasoned that the found particles were unrepresentative. In contrast, microplastic particles < 1 mm were discovered in a high mass in soil samples exposed to plastic mulching or fertilization with sewage sludge or compost (0 – 115 mg/kg). On average, microplastic contents detected in soil samples taken from a construction site and an inner-city lake were higher (13 – 238 mg/kg). As expected, microplastic content in soil sampled in proximity to roads was more pronounced in the upper soil layers. In contrast, very remote sampling sites, expectably uncontaminated, did not lead to the detection of microplastic regarding to thermoanalytical detection method.
In a proof of concept experiment several in vivo and in vitro ecotoxicological tests were applied to evaluate the effect of microplastics (tyre abrasion, polystyrene containing hexabromocyclododecane) in natural soils. In summary, while no effects of the examined probes could be detected on higher levels of biological organization after exposures to earthworm E. andrei, significant changes in several oxidative stress related biomarkers were observed.
T2 - SETAC Europe 2022
CY - Kopenhagen, Denmark
DA - 15.05.2022
KW - Microplastic
KW - TED-GC/MS
KW - Soil
PY - 2022
AN - OPUS4-55872
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - INPR
A1 - Battistella, Beatrice
A1 - Revill, Adam
A1 - Venzago, Cornel
A1 - Hoffmann, Volker
A1 - Agudo Jacome, Leonardo
A1 - Al-Sabbagh, Dominik
A1 - Recknagel, Sebastian
A1 - Abad Andrade, Carlos Enrique
T1 - Depth-Resolved Lithium Isotope Fractionation as a Diagnostic of Interphase Evolution and Degradation in Lithium Ion Batteries
N2 - Lithium isotopic fractionation is well-established in dynamic geochemical systems; however, its role in lithium-ion batteries (LIBs) remains uninvestigated. Herein, we report the first depth-resolved demonstration that isotopic separation occurs during Li-ion cell operation whose magnitude depends on the cycling history. Using depth-resolved glow discharge mass spectrometry, we monitored the 7Li/6Li ratio in LiNi0.333Mn0.333Co0.333O2 (NMC111)||graphite coin cell electrodes at defined life-cycle stages. Different charging rates were examined to get mechanistic insight into kinetic and thermodynamic control in the fractionation process. Although pristine electrodes exhibit a uniform isotopic ratio, cycled electrodes show a distinct 7Li enrichment in the positive electrode and a corresponding accumulation of 6Li at the surface of the negative electrode. The degree of isotopic separation varies with the charging rate. Isotopic signatures correlate with capacity fading, indicating lithium isotope mapping as a sensitive diagnostic tool for tracking electrode degradation and the evolution of the electrode–electrolyte interphases in LIBs.
KW - Li-ion batteries
KW - Lithium isotopes
KW - Post-mortem analysis
KW - GD-MS
KW - Depth profile
KW - Mass spectrometry
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-651287
DO - https://doi.org/10.26434/chemrxiv-2025-5rvlk
SP - 1
EP - 19
AN - OPUS4-65128
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Decoding the Elemental Fingerprints of Ancient Gold: A Synchrotron-based Approach
N2 - This contribution focuses on the application of synchrotron radiation X-ray fluorescence (SR XRF) for the analysis of ancient gold objects at the BAMline, showcasing several noteworthy examples. One prominent artifact is the Sky Disc of Nebra, which presented a relatively straightforward question to be addressed: Do the gold inlays belong together, and can we glean insights about their origin? In contrast, the analysis of the Bernstorf gold, an alleged Bronze Age treasure composed of exceptionally pure gold, posed a more intricate challenge. The debate surrounding its authenticity prompted an in-depth investigation utilizing SR XRF with different experimental conditions. This approach, involving the analysis of trace elements, played a pivotal role in elucidating the nature and age of the gold, offering valuable insights into its production Platinum emerges as a crucial trace element for gold analysis, given its typically low concentration in gold artifacts, often in the range of a few parts per million (ppm). Accurately measuring Platinum in the presence of overlapping emission lines from gold is arduous. To overcome this challenge, BAMline developed a wavelength dispersive set-up known as D2XRF, employing a pixelated energy-dispersive X-ray detector (pnCCD). This innovative approach enables the resolution of overlapping emission lines, leading to a remarkable detection limit of 1 ppm for Platinum in gold samples. Furthermore, the application of the pnCCD for imaging element distributions on a Phoenician ivory artifact will be showcased. This technique allows for the visualization and mapping of various elements, which opens the possibility to reconstruct the original appearance. The comprehensive analysis of ancient gold artifacts at BAMline has provided valuable insights into the craftsmanship, trade, and technological advancements of ancient civilizations. By unraveling the complex stories these artifacts carry, our studies contributed significantly to the fields of archaeology, history, and materials science. It underscores the importance of interdisciplinary approaches in piecing together the puzzle of human history, revealing the interconnectedness of cultures through the lens of non-destructive analysis.
T2 - Denver X-ray Conference 2024
CY - Denver, CO, USA
DA - 04.08.2024
KW - Gold
KW - Synchrotron
KW - XRF
KW - BAMline
PY - 2024
AN - OPUS4-61701
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Dinter, Adelina-Elisa
T1 - Deciphering corrosion processes of MIC organisms - single cell-ICP-ToF-MS analysis of archaea on solid steels
N2 - ICP-ToF (time of flight) MS enables the analysis of the multi-element fingerprint of single cells. The single cell ICP-ToF-MS is used in the presented poster for the analysis of archaea involved in microbiologically influenced corrosion (MIC) of steel. By means of sc-ICP-ToF-MS, the possible uptake of individual elements from the respective steel is investigated - the information obtained will be used in the future to elucidate underlying mechanisms and develop possible material protection concepts. The work combines modern methods of analytical sciences with materials.
T2 - SALSA - Make & Measure 2021
CY - Online meeting
DA - 16.09.2021
KW - Sc-ICP-ToF-MS
KW - Single cell analysis
KW - Microbiologically influenced corrosion
KW - Archaea
KW - Poster presentation
PY - 2021
AN - OPUS4-53337
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Das goldene Zeitalter war damals Analyse von Gold mit Synchrotronstrahlung
N2 - Gold ist eines der sieben bereits in der Antike bekannten Metalle und wurde wegen seines Glanzes und seiner Seltenheit seit jeher als Tauschmittel und zur Herstellung von Schmuck verwendet. Außerdem ist es leicht zu bearbeiten und weitgehend resistent gegen chemische Einflüsse.
Die Analyse von Gold mit der durch Synchrotronstrahlung angeregten Röntgenfluoreszenzanalyse ist zerstörungsfrei und liefert Informationen über die in der untersuchten Probe vorhandenen chemischen Elemente.
Im Mittelpunkt der hier vorgestellten Untersuchungen an der BAMline stehen Fragen nach der Herkunft, dem Herstellungsprozess und der Zugehörigkeit von Goldfunden. Die verschiedenen Fragestellungen werden anhand einer Reihe von Beispielen erläutert, die vom Wikingerschatz von Hiddensee über die Himmelsscheibe von Nebra bis hin zu Funden aus Ägypten reichen. Darüber hinaus werden die heute am Synchrotron verfügbaren modernen Messmethoden vorgestellt.
T2 - WISSENSCHAFT MIT WIRKUNG: Workshop Kulturguterhaltung – vom Dampfkessel zu Nanomaterialien
CY - Berlin, Germany
DA - 17.11.2021
KW - Gold
KW - Synchrotron
KW - Bernstorf
KW - Nebra
KW - XRF
PY - 2021
AN - OPUS4-54139
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - GEN
A1 - Smales, Glen Jacob
A1 - Pauw, Brian Richard
T1 - DACHS/MOFs/AutoMOFs_2/Synthesis
N2 - The DACHS (Database for Automation, Characterization and Holistic Synthesis) project aims to create completely traceable experimental data, covering syntheses, measurements, analyses, and interpretations. DACHS_MOFs focuses on the synthesis and characterisation of metal-organic frameworks, across multiple, automation-assisted experimental series (AutoMOFs), with the overall goal of producing reproducible MOF samples through tracking of the synthesis parameters.
DACHS_MOFs is simultaneously used to test the DACHS principles.
This upload contain synthesis data from AutoMOFs_2 in HDF5 format (.h5). Each .h5 file contains detailed information on the chemical, experimenal, and synthesis parameters used during the synthesis of a single AutoMOF sample.
KW - Automation
KW - Procedure
KW - Synthesis
KW - Traceability
PY - 2024
DO - https://doi.org/10.5281/zenodo.11236074
PB - Zenodo
CY - Geneva
AN - OPUS4-60611
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - GEN
A1 - Smales, Glen Jacob
A1 - Pauw, Brian Richard
T1 - DACHS/MOFs/AutoMOFs_1/Synthesis
N2 - The DACHS (Database for Automation, Characterization and Holistic Synthesis) project aims to create completely traceable experimental data, covering syntheses, measurements, analyses, and interpretations. DACHS_MOFs focuses on the synthesis and characterisation of metal-organic frameworks, across multiple, automation-assisted experimental series (AutoMOFs), with the overall goal of producing reproducible MOF samples through tracking of the synthesis parameters.
DACHS_MOFs is simultaneously used to test the DACHS principles.
This upload contain synthesis data from AutoMOFs_1 in HDF5 format (.h5). Each .h5 file contains detailed information on the chemical, experimenal, and synthesis parameters used during the synthesis of a single AutoMOF sample.
KW - Synthesis
KW - Automation
KW - Traceability
KW - Procedure
PY - 2024
DO - https://doi.org/10.5281/zenodo.11236031
PB - Zenodo
CY - Geneva
AN - OPUS4-60243
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Smales, G. J.
T1 - DACHS-MOFs Database for Automation, Characterisation, and Holistic Synthesis
N2 - The DACHS (Database for Automation, Characterization and Holistic Synthesis) project aims to create completely traceable experimental data, covering syntheses, measurements, analyses, and interpretations. DACHS MOFs focuses on the synthesis and characterisation of metal-organic frameworks (MOFs), across multiple, automation-assisted experimental series (AutoMOFs), with the overall goal of producing reproducible MOF syntheses. So far > 1200 MOF samples have been synthesised, with SAXS/WAXS data currently being collected on all samples. All results, including those from “failed” syntheses, are included in the database, as results are results and should be considered agnostic to any positive ornegative interpretations. DACHS MOFs represents the initial trial of the DACHS project, serving as a comprehensive resource for researchers aiming to optimize the synthesis and characterization of MOFs.
T2 - XIX International Small Angle Scattering Conference
CY - Taipei, Taiwan
DA - 04.11.2024
KW - Lab automation
KW - Synthesis
KW - Metal organic frameworks
KW - Zif-8
KW - Databases
KW - Synthesis data
PY - 2024
AN - OPUS4-61626
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - INPR
A1 - Smales, Glen J.
A1 - Appel, Paul Alexander
A1 - Breßler, Ingo
A1 - Chambers, Aaron
A1 - Dumele, Oliver
A1 - Ebisch, Maximilian
A1 - Frontzek, Julius
A1 - del Refugio Monroy, José
A1 - Rosalie, Julian M.
A1 - Pauw, Brian R.
T1 - DACHS and RoWaN: The Automated and Traceable Synthesis of ZIF-8
N2 - Automated synthesis and open-data practices are increasingly seen as key enablers of transparent, traceable, and reproducible science. By combining automation with structured, metadata-rich documentation, it becomes possible to systematically com- pare synthesis strategies and link outcomes to detailed parameters. In this work, we implement such an approach to study the synthesis of ZIF-8, comparing hand and automation-assisted methods under controlled conditions. Using over 100 synthesis experiments, we assess the repeatability of particle size and yield, and explore how variations in mixing and injection influence outcomes. This study demonstrates how traceable synthesis workflows can support repeatability and comparison across synthe- sis strategies. The DACHS (Database for Automation, Characterization and Holistic Synthesis) framework underpins this work, providing a lightweight infrastructure for transparent synthesis data capture.
KW - Automation
KW - MOFs
KW - SAXS
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-645861
DO - https://doi.org/10.26434/chemrxiv-2025-7fgg0
SP - 1
EP - 32
PB - Cambridge
AN - OPUS4-64586
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Meyer, Andreas
A1 - Falkenhagen, Jana
A1 - Kricheldorf, Hans R.
T1 - Cyclic polyglycolide by means of metal acetylacetonates
N2 - Glycolide was polymerized in bulk at 160 °C using various metal acetylacetonates as catalysts. Zirconium acetylacetonate was particularly efficient, enabling rapid polymerization even at 130 °C. The formation of cyclic poly(glycolic acid) (PGA), most likely via a ring-expansion polymerization (REP) mechanism, was proven by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. Depending on the polymerization conditions, the formation of even-numbered cycles was favored to varying degrees. Number-average molecular weights (Mn) in the range of 2000–3500 g mol−1 were achieved with dispersities below 2.0. Wide-angle X-ray scattering (WAXS) powder patterns showed that the crystal lattice was the same as that of known linear PGAs, regardless of the Mn values. These patterns enabled a comparison of crystallinities with values derived from DSC measurements.
KW - MALDI-TOF MS
KW - Polyglycolide
KW - Crystallization
KW - Small-angle X-ray scattering
KW - Cyclization
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653731
DO - https://doi.org/10.1039/d5ra07961f
SN - 2046-2069
VL - 16
IS - 2
SP - 1757
EP - 1764
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-65373
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Altmann, Korinna
A1 - Hodoroaba, Vasile-Dan
T1 - CUSP inter-laboratory comparisons
N2 - In this breakout session first, an introduction is given on the planning and organisation of an inter-laboratory comparison (ILC) under the pre-standardisation plattform VAMAS within the newly formed technical working area TWA 45 Micro and Nano Plastics in the Environment. An update with the ILCs on micro- and nanoplastic performed so far is also given. In the third part, the requirements for a reference materials are presented. The needs from the different H2020 micro- and nanoplastic projects are collected and compiled in an ILC matrix for joint activities as the next steps.
T2 - The European Research Cluster to Understand the Health Impact of Micro- and Nanoplastics (CUSP) Launching Event
CY - Online meeting
DA - 10.06.2021
KW - Microplastic
KW - Nanoplastic
KW - Inter-laboratory comparison
KW - VAMAS
KW - Reference material
PY - 2021
AN - OPUS4-52808
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Bresch, Harald
A1 - Hodoroaba, Vasile-Dan
A1 - Schmidt, Alexandra
A1 - Rasmussen, K.
A1 - Rauscher, H.
T1 - Counting Small Particles in Electron Microscopy Images — Proposal for Rules and Their Application in Practice
N2 - Electron microscopy (EM) is the gold standard for the characterisation of the morphology (size and shape) of nanoparticles. Visual observation of objects under examination is always a necessary first step in the characterisation process. Several questions arise when undertaking to identify and count particles to measure their size and shape distribution. In addition to challenges with the dispersion and identification of the particles, more than one protocol for counting particles is in use. This paper focuses on precise rules for the counting of particles in EM micrographs, as this influences the measurement accuracy of the number of particles, thus implicitly affecting the size values of the counted particles. We review and compare four different, commonly used methods for counting, which we then apply in case studies. The impact of the selected counting rule on the obtained final particle size distribution is highlighted. One main aim of this analysis is to support the application of a specific, well-defined counting approach in accordance with regulatory
requirements to contribute to achieving more reliable and reproducible results. It is also useful for the new harmonised measurement procedures for determining the particle size and particle size distribution of nanomaterials.
KW - Nano
KW - Particle size distribution
KW - Nanoparticle
KW - Nanomaterial
KW - OECD
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-551891
DO - https://doi.org/10.3390/nano12132238
SN - 2079-4991
VL - 12
IS - 13
SP - 2238
PB - MDPI
CY - Basel
AN - OPUS4-55189
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Linberg, Kevin
T1 - Controlled Polymorphism by Elevated Temperature Ball Milling
N2 - Mechanochemistry provides polymorphs that are difficult to obtain by conventional solution-based methods. Based on the nicotinamide and pimelic acid cocrystal, we demonstrated that the ball size, frequency, and temperature are essential parameters. Our results indicate that fine-tuning the energy input during a mechanochemical reaction can provide control over polymorphism.
T2 - Bessy User Meeting 2023
CY - Berlin, Germany
DA - 22.06.2023
KW - Mechanochemistry
KW - Temperature
KW - Cocrystal
KW - Energy input
KW - Polymorph
PY - 2023
AN - OPUS4-57985
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Grabicki, N.
A1 - Nguyen, K. T. G.
A1 - Weidner, Steffen
A1 - Dumele, O.
T1 - Confined Spaces in [n]Cyclo-2,7-pyrenylenes
N2 - A set of strained aromatic macrocycles based on [n]cyclo2,7-(4,5,9,10-tetrahydro)pyrenylenes is presented with size dependent photophysical properties. The K-region of pyrene was functionalized with ethylene glycol groups to decorate the outer rim and thereby confine the space inside the macrocycle. This confined space is especially pronounced for n = 5, which leads to an internal binding of up to 8.0×104 M–1 between the ether-decorated [5]cyclo-2,7-pyrenylene and shape complementary crown ether–cation complexes.
Both, the ether-decorated [n]cyclo-pyrenylenes as well as one of their host–guest complexes have been structurally characterized by single crystal X-ray analysis. In combination with computational methods the structural and thermodynamic reasons for the exceptionally strong binding have been elucidated. The presented rim confinement strategy makes cycloparaphenylenes an attractive supramolecular host family with a favorable, size-independent read-out signature and binding capabilities extending beyond fullerene guests.
KW - Cycloparaphenylenes
KW - Host–guest systems
KW - Macrocycles
KW - Molecular recognition
KW - Supramolecular chemistry
PY - 2021
DO - https://doi.org/10.1002/anie.202102809
SN - 1433-7851
VL - 60
IS - 27
SP - 1
EP - 7
PB - Wiley VCH
AN - OPUS4-52517
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Visileanu, Emilia
A1 - Altmann, Korinna
A1 - Stepa, Raluca
A1 - Haiducu, Maria
A1 - Miclea, Paul Tiberiu
A1 - Vladu, Alina
A1 - Dondea, Felicia
A1 - Grosu, Marian Catalin
A1 - Scarlat, Razvan
T1 - Comparative Analysis of Airborne Particle Concentrations in Textile Industry Environments Throughout the Workday
N2 - This paper addresses the growing concern surrounding microplastic pollution, particularly within the textile industry, and the associated potential health risks linked to the inhalation and ingestion of microplastic particles. Microplastics, defined as plastic particles smaller than five millimeters, are increasingly found not only in aquatic environments, but also in soils, air, and food. Although research on the health impacts of microplastics is still emerging, early studies indicate that these particles could contribute to health issues, including oxidative stress, inflammation, and cardiovascular diseases. Notably, individuals with higher concentrations of plastics in arterial plaques are more susceptible to heart attacks and strokes. In the textile industry, synthetic fibers such as polyester, nylon, and acrylic release microplastics into the air during production. The paper discusses a study conducted in a textile company that processes polyester yarns, where airborne microplastic concentrations were measured at various locations throughout the day. Particle sizes ranging from 0.3 nm to 10 nm were analyzed, revealing the presence of polyester polymers in the particulate matter. These findings underscore the widespread nature of microplastic pollution, particularly in industrial settings, and raise concerns about the health risks associated with prolonged exposure to airborne microplastics. While further research is necessary to fully understand the extent of these health impacts, preliminary data suggest a troubling link between microplastic inhalation and cardiovascular conditions.
KW - Microplastics
KW - Textiles
KW - Airborne particles
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-635269
DO - https://doi.org/10.3390/microplastics4020034
SN - 2673-8929
VL - 4
IS - 2
SP - 1
EP - 17
PB - MDPI AG
AN - OPUS4-63526
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Diehn, S.
A1 - Zimmermann, B.
A1 - Tafintseva, V.
A1 - Seifert, S.
A1 - Bagcioglu, M.
A1 - Ohlson, M.
A1 - Weidner, Steffen
A1 - Fjellheim, S.
A1 - Kohler, A.
A1 - Kneipp, Janina
T1 - Combining Chemical Information From Grass Pollen in Multimodal Characterization
N2 - The analysis of pollen chemical composition is important to many fields, including agriculture, plant physiology, ecology, allergology, and climate studies. Here, the potential of a combination of different spectroscopic and spectrometric methods regarding the characterization of small biochemical differences between pollen samples was evaluated using multivariate statistical approaches. Pollen samples, collected from three populations of the grass Poa alpina, were analyzed using Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, surface enhanced Raman scattering (SERS), and matrix assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS). The variation in the sample set can be described in a hierarchical framework comprising three populations of the same grass species and four different growth conditions of the parent plants for each of the populations. Therefore, the data set can work here as a model system to evaluate the classification and characterization ability of the different spectroscopic and spectrometric methods. ANOVA Simultaneous Component Analysis (ASCA) was applied to achieve a separation of different sources of variance in the complex sample set. Since the chosen methods and sample preparations probe different parts and/or molecular constituents of the pollen grains, complementary information about the chemical composition of the pollen can be obtained. By using consensus principal component analysis (CPCA), data from the different methods are linked together. This enables an investigation of the underlying global information, since complementary chemical data are combined. The molecular information from four spectroscopies was combined with phenotypical information gathered from the parent plants, thereby helping to potentially link pollen chemistry to other biotic and abiotic parameters.
KW - Pollen
KW - MALDI-TOF MS
KW - FTIR
KW - Raman
KW - Multivariate analyses
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-504822
DO - https://doi.org/10.3389/fpls.2019.01788
VL - 10
SP - 1788
AN - OPUS4-50482
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tannenberg, Robert
A1 - Paul, Martin
A1 - Röder, Bettina
A1 - Gande, S. L.
A1 - Sreeramulu, S.
A1 - Saxena, K.
A1 - Richter, C.
A1 - Schwalbe, H.
A1 - Swart, C.
A1 - Weller, Michael G.
T1 - Chemiluminescence biosensor for the determination of cardiac troponin I (cTnI)
N2 - Cardiac troponin I (cTnI) is a crucial biomarker for diagnosing cardiac vascular diseases, including acute myocardial infarction (AMI). This study presents a proof-of-concept chemiluminescence-based immunosensor for rapid and accurate measurement of cTnI, with the potential for online monitoring. The immunosensor incorporates a flow cell design and a sensitive complementary metal-oxide-semiconductor (CMOS) camera for optical readout. A microfluidic setup was established to enable selective and quasi-online determination of cTnI within ten minutes. The sensor was tested with recombinant cTnI in phosphate buffer, demonstrating measurements in the concentration range of 2–25 µg/L, with a limit of detection (LoD) of 0.6 µg/L (23 pmol/L) achieved using the optimized system. The immunosensor exhibited high selectivity, as no cross-reactivity was observed with other recombinant proteins such as cTnT and cTnC at a concentration of 16 µg/L. Measurements with diluted blood plasma and serum yielded an LoD of 60 µg/L (2.4 nmol/L) and 70 µg/L (2.9 nmol/L), respectively. This biosensor offers a promising approach for the rapid and sensitive detection of cTnI, contributing to the diagnosis and management of acute myocardial infarction and other cardiac vascular diseases.
N2 - Das kardiale Troponin I (cTnI) ist ein wichtiger Biomarker für die Diagnose von Herz-Kreislauf-Erkrankungen, einschließlich des akuten Myokardinfarkts (AMI). In dieser Studie wird ein auf Chemilumineszenz basierender Immunsensor für die schnelle und genaue Messung von cTnI vorgestellt, der das Potenzial für eine Online-Überwachung hat. Der Immunsensor besteht aus einer Durchflusszelle und einer empfindlichen CMOS-Kamera (Complementary Metal-Oxide-Semiconductor) zur optischen Detektion. Es wurde ein mikrofluidischer Aufbau entwickelt, der eine selektive und quasi Online-Bestimmung von cTnI innerhalb von zehn Minuten ermöglicht. Der Sensor wurde mit rekombinantem cTnI in Phosphatpuffer getestet und zeigte einen Messbereich von 2-25 µg/L, wobei mit dem optimierten System eine Nachweisgrenze (LoD) von 0,6 µg/L (23 pmol/L) erreicht wurde. Der Immunsensor zeigte eine hohe Selektivität, da keine Kreuzreaktivität mit anderen rekombinanten Proteinen wie cTnT und cTnC bei einer Konzentration von 16 µg/L beobachtet wurde. Messungen mit verdünntem Blutplasma und Serum ergaben einen LoD von 60 µg/L (2,4 nmol/L) bzw. 70 µg/L (2,9 nmol/L). Dieser Biosensor bietet einen vielversprechenden Ansatz für den schnellen und empfindlichen Nachweis von cTnI, der zur Diagnose und Behandlung des akuten Myokardinfarkts und anderer kardialer Gefäßerkrankungen beitragen kann.
KW - Acute myocardial infarction
KW - Heart attack
KW - Emergency
KW - Diagnosis
KW - Cardiac troponin
KW - Biomarker
KW - Immunosensor
KW - Biosensor
KW - Chemiluminescence
KW - Luminol
KW - Peroxidase
KW - Monoclonal antibodies
KW - Flow injection immunoassay
KW - Immunometric assay
KW - Immunometric biosensor
KW - Microfluidic system
KW - Monolithic column
KW - Online biosensor
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575471
DO - https://doi.org/10.3390/bios13040455
SN - 2079-6374
VL - 13
IS - 4
SP - 1
EP - 20
PB - MDPI
CY - Basel
AN - OPUS4-57547
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - ChatGPT and EPICS: LLM-Enhanced Control Systems for Synchrotron Beamlines
N2 - The document highlights ChatGPT-EPICS integration for synchrotron beamline automation, employing tools like motor records, PV naming systems, and LLM inference. It evaluates efficiency and challenges in implementing automated motor optimization and handling EPICS controls.
T2 - BESSY science seminar
CY - Online meeting
DA - 22.11.2024
KW - Chatgpt
KW - EPICS
KW - BAMline
PY - 2024
AN - OPUS4-61896
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - ChatGPT and EPICS: LLM-Enhanced Control Systems for Synchrotron Beamlines
N2 - The BAMline at BESSY II represents a hard X-ray spectroscopy facility enabling non-destructive analysis across diverse research areas like materials science, chemistry, biology, and cultural heritage studies. As a multipurpose beamline serving users from various disciplines, it underscores the necessity of adaptable and efficient control systems to maximize beamline utilization and scientific output.
In this contribution, we detail the innovative integration of ChatGPT , OpenAI’s state-of-the-art Large Language Model (LLM), with the Experimental Physics and Industrial Control System (EPICS) which underpins the operational framework of the BAMline. This integration leverages the advanced natural language processing (NLP) capabilities of ChatGPT, presenting a revolutionary approach to beamline control that markedly simplifies user interaction. Through this, we facilitate a user-friendly pathway to executing complex experimental setups, eliminating the barrier imposed by conventional scripting languages and the often-challenging graphical user interfaces. This innovation promises to significantly streamline experimental workflows, thereby enhancing the efficiency of scientific research conducted at the beamline.
Further enhancing this user-centric approach, we introduce an advanced graphical user interface (GUI) application. This novel application seamlessly melds the LLM’s NLP capabilities with EPICS, thereby enabling researchers to articulate experimental requirements through simple textual or voice commands. This interface interprets these commands to manipulate various beamline components, including but not limited to the Double Crystal Monochromator (DCM), Double Multilayer Monochromator (DMM), as well as various filters and slits. By parsing user input, extracting pertinent parameters, and generating a structured JSON object that reflects the desired device positions and experimental settings, the GUI application bridges the gap between complex control commands and intuitive user interactions. This advancement not only lowers the entry threshold for new users but also streamlines the operational workflow for experienced researchers.
Looking ahead, we aim to extend the system to cover the entire experimental cycle, from setup to data analysis. Using LLMs, one could translate plain-language experiment descriptions into precise operational commands, revolutionizing the research process and making advanced scientific exploration more accessible to a wider community.
T2 - European X-ray Spectrometry Conference
CY - Athens, Greece
DA - 24.06.2024
KW - EPICS
KW - ChatGPT
KW - BAMline
KW - Synchrotron
PY - 2024
AN - OPUS4-61702
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - ChatGPT and EPICS: LLM-Enhanced Control Systems for Synchrotron Beamlines
N2 - The BAMlineat BESSY II represents a hard X-ray spectroscopy facility enabling non-destructive analysis across diverse research areas like materials science, chemistry, biology, and cultural heritage studies. As a multipurpose beamline serving users from various disciplines, it underscores the necessity of adaptable and efficient control systems to maximize beamline utilization and scientific output.
In this contribution, we detail the innovative integration of ChatGPT, OpenAI’s state-of-the-art Large Language Model (LLM), with the Experimental Physics and Industrial Control System (EPICS) which underpins the operational framework of the BAMline. This integration leverages the advanced natural language processing (NLP) capabilities of ChatGPT, presenting a revolutionary approach to beamline control that markedly simplifies user interaction. Through this, we facilitate a user-friendly pathway to executing complex experimental setups, eliminating the barrier imposed by conventional scripting languages and the often-challenging graphical user interfaces. This innovation promises to significantly streamline experimental workflows, thereby enhancing the efficiency of scientific research conducted at the beamline.
Further enhancing this user-centric approach, we introduce an advanced graphical user interface (GUI) application. This novel application seamlessly melds the LLM’s NLP capabilities with EPICS, thereby enabling researchers to articulate experimental requirements through simple textual or voice commands. This interface interprets these commands to manipulate various beamline components, including but not limited to the Double Crystal Monochromator (DCM), Double Multilayer Monochromator (DMM), as well as various filters and slits. By parsing user input, extracting pertinent parameters, and generating a structured JSON object that reflects the desired device positions and experimental settings, the GUI application bridges the gap between complex control commands and intuitive user interactions. This advancement not only lowers the entry threshold for new users but also streamlines the operational workflow for experienced researchers.
Looking ahead, we aim to extend the system to cover the entire experimental cycle, from setup to data analysis. Using LLMs, one could translate plain-language experiment descriptions into precise operational commands, revolutionizing the research process and making advanced scientific exploration more accessible to a wider community.
T2 - International Conference on Synchrotron Radiation Instrumentation (SRI)
CY - Hamburg, Germany
DA - 26.08.2024
KW - Chatgpt
KW - EPICS
KW - BAMline
KW - Synchrotron
PY - 2024
AN - OPUS4-61700
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - ChatGPT and epics: LLM enhanced control systems for synchrotron Beamlines
N2 - The presentation describes how large language models (LLMs) such as ChatGPT can be integrated with the EPICS control system to improve the automation and usability of synchrotron beamlines like the BAMline at BESSY II.
It explains how LLMs can interpret natural language instructions, translate them into EPICS commands, and interact with experimental tools to perform complex tasks such as moving motors, running scans, or adjusting beamline components. The system, named P.E.T.E.R. (Performance Enhancing Technology for Experimental Research), supports features like multi-step reasoning, Python scripting, feedback loops, multilingual input, and voice control using OpenAI’s ChatGPT and Whisper.
T2 - Workshop "BAM - Fraunhofer Materials LLM days"
CY - Tübingen, Germany
DA - 03.07.2025
KW - Chatgpt
KW - LLM
KW - EPICS
KW - BAMline
KW - Sanchrotron
PY - 2025
AN - OPUS4-64478
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Pauw, Brian Richard
T1 - Chasing perfection: A holistic approach to materials science scattering experiments
N2 - The materials scientists we work with do not want (or need) to learn the ways of the scatterer; they are primarily interested in obtaining trustworthy answers. In particular, they need structural understanding in light of the wider framework of their experiment(s). Our interest, therefore, lies in helping them attain this this interconnected understanding, while using such investigations to further hone our methodology to approximate perfection.
While perfection is by definition an unattainable goal, we have spent the last 15+ years exploring and expanding on many of its constituent aspects (often together with likeminded people) [1]. These aspects include:
- developing various visualization and simulation tools,
- deconstructing data corrections and uncertainty estimation,
- advancing analysis methods,
- quantifying questions on traceability, documentation,
- reproducible automation of synthesis-, measurement- and data pipelines,
- data visualization, exploration and education,
- and many more…
T2 - XIX International Small Angle Scattering Conference
CY - Taipei, Taiwan
DA - 04.11.2024
KW - Methodology
KW - X-ray scattering
KW - Data quality
KW - Data provenance
KW - Data stewardship
KW - Lab automation
KW - Perfection
PY - 2024
AN - OPUS4-61625
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Altmann, Korinna
A1 - Portela, Raquel
A1 - Barbero, Francesco
A1 - Breuninger, Esther
A1 - Camassa, Laura Maria Azzurra
A1 - Velickovic, Tanja Cirkovic
A1 - Charitidis, Costas
A1 - Costa, Anna
A1 - Fadda, Marta
A1 - Fengler, Petra
A1 - Fenoglio, Ivana
A1 - Giovannozzi, Andrea M.
A1 - Haugen, Øyvind Pernell
A1 - Kainourgios, Panagiotis
A1 - von der Kammer, Frank
A1 - Kirchner, Markus J.
A1 - Lomax-Vogt, Madeleine
A1 - Lujic, Tamara
A1 - Milczewski, Frank
A1 - Moussawi, Mhamad Aly
A1 - Ortelli, Simona
A1 - Parac-Vogt, Tatjana N.
A1 - Potthoff, Annegret
A1 - Reinosa, Julian J.
A1 - Röschter, Sophie
A1 - Sacco, Alessio
A1 - Wimmer, Lukas
A1 - Zanoni, Ilaria
A1 - Dailey, Lea Ann
T1 - Characterizing nanoplastic suspensions of increasing complexity: Inter-laboratory comparison of size measurements using dynamic light scattering
N2 - Understanding the potential human health risks associated with micro- and nanoplastic exposure is currently a priority research area. Nanoplastic toxicity studies are complicated by the lack of available, well-characterized test and reference materials. Further, many nanoplastic test materials are inherently more polydisperse and heterogenous in shape compared to polystyrene beads, making accurate and representative size distribution measurements particularly challenging. The aim of this study was to conduct an inter-laboratory comparison of dynamic light scattering measurements, the most commonly used particle sizing method for nanomaterials. Using a published standard operating procedure, size measurements in water and a standardized cell culture medium (CCM) were generated for spherical, carboxy-functionalized polystyrene nanoparticles (PS-COOH; 50 nm; benchmark material), and for increasingly complex in-house produced spherical poly(ethylene terephthalate) (nanoPET) and irregular shaped polypropylene (nanoPP) test materials. The weighted mean of hydrodynamic diameters of PS-COOH dispersed in water (55 ± 5 nm) showed moderate variation between labs (coefficient of variation, CV = 8.2%) and were similar to literature reports. Measurements of nanoPET (82 ± 6 nm) and nanoPP (182 ± 12 nm) in water exhibited similar CV values (nanoPET: 7.3% and nanoPP; 6.8%). Dispersion of PS-COOH and nanoPET in CCM increased the CV to 15.1 and 14.2%, respectively, which is lower than literature reports (CV = 30%). We conclude with a series of practical recommendations for robust size measurements of nanoplastics in both water and complex media highlighting that strict adherence to a standard operating procedure is required to prevent particle agglomeration in CCM
KW - Nanoplastics
KW - Reference materials
KW - Polypropylene
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-644571
DO - https://doi.org/10.1039/d5en00645g
SN - 2051-8153
SP - 1
EP - 15
PB - Royal Society of Chemistry (RSC)
CY - Cambridge
AN - OPUS4-64457
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Klöckner, P.
A1 - Seiwert, B.
A1 - Eisentraut, Paul
A1 - Braun, Ulrike
A1 - Reemtsma, T.
A1 - Wagner, S.
T1 - Characterization of tire and road wear particles from road runoffindicates highly dynamic particle properties
N2 - Tire and road wear particles (TRWPs) are heteroagglomerates of tire rubber and other particles deposited on the road surface and one of the main contributors to non-exhaust emissions of automobile traffic. In this study, samples from road environments were analyzed for their TRWP contents and concentra- tions of eight organic tire constituents. TRWP concentrations were determined by quantifying Zn in the density fraction < 1.9 g/cm ³and by thermal extraction desorption-gas chromatography-mass spectrometry (TED-GC/MS) and the concentrations ranged from 3.7 to 480 mg TRWP/g. Strong and statistically signif- icant correlations with TRWPs were found for 2-hydroxybenzothiazole and 2-aminobenzothiazole, indi- cating that these substances may be suitable markers of TRWPs. The mass distribution of TRWPs in road dust suggests that the main mass fraction formed on roads consists of coarse particles ( > 100 μm). Data for a sedimentation basin indicate that the fine fraction ( < 50 μm) is preferentially transported by road runoffinto receiving waters. The size distribution and density data of TRWP gathered by three different quantitation approaches also suggest that aging of TRWPs leads to changes in their particle density. An improved understanding of the dynamics of TRWP properties is essential to assess the distribution and dissipation of this contaminant of emerging concern in the environment.
KW - Tire Wear
KW - Density separation
KW - Microplastic
KW - Urban
PY - 2020
DO - https://doi.org/10.1016/j.watres.2020.116262
VL - 185
SP - 116262
PB - Elsevier Ltd.
AN - OPUS4-51256
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Hülagü, Deniz
A1 - Ermilova, Elena
A1 - Weise, Matthias
A1 - de Préville, Sophie
A1 - Hoffmann, Johannes
A1 - Morán-Meza, José
A1 - Piquemal, Francois
A1 - Hertwig, Andreas
T1 - Characterization of electrical properties in microstructured ITO layers using spectroscopic ellipsometry
N2 - Thin indium tin oxide (ITO) layers are essential in optoelectronics due to their good electrical conductivity, optical transparency in the visible and near infrared regions, substrate adherence and chemical stability. They are widely used in photovoltaic cells, displays, and organic LEDs, and as low emissivity coatings in smart windows and energy-efficient buildings. For nanophotonic devices, understanding the interplay of ITO’s optical and electrical properties is crucial. Electrical resistivity can be tuned by modifying deposition conditions and layer thickness. However, measuring these properties, especially on microstructured surfaces, remains challenging due to the issues like homogeneity and instability during etching.
Spectroscopic ellipsometry (SE), a non-destructive and phase-sensitive optical technique, offers precise measurement of thin film thickness and dielectric properties. In this study, we investigated the layer thickness, optical constants, and sheet resistance of unstructured and microstructured ITO thin layers using SE. Unstructured layers were deposited via DC-magnetron sputtering on silicon (Si) substrates in argon (Ar) atmospheres with varying oxygen (O2) flows.
This multi-technique approach enhances the understanding of ITO layer structuring and provides robust methodologies for correlating optical and electrical properties, advancing metrology for nanotechnology applications and material science. It also opens the pathway to new reference samples and calibration methods for electrical properties involving device-like structured samples.
T2 - ICSE10 - 10th International Conference on Spectroscopic Ellipsometry
CY - Boulder, CO, USA
DA - 08.06.2025
KW - Ellipsometry
KW - Indium tin oxide (ITO)
KW - Scanning microwave microscopy (SMM)
KW - Sheet resistance calibration standards
KW - ITO wet etching
PY - 2025
AN - OPUS4-63631
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Monikh, Fazel A.
A1 - Materić, Dušan
A1 - Valsami-Jones, Eugenia
A1 - Grossart, Hans-Peter
A1 - Altmann, Korinna
A1 - Holzinger, Rupert
A1 - Lynch, Iseult
A1 - Stubenrauch, Jessica
A1 - Peijnenburg, Willie
T1 - Challenges in studying microplastics in human brain
N2 - Human exposure to microplastics and nanoplastics (MNPs) is an emerging concern with potential implications for health. As awareness of this issue grows, it has prompted increasing scientific attention toward understanding if, and how, MNPs accumulate in human tissues. In a recent study, Nihart et al.1 used the analytical technique of pyrolysis gas chromatography–mass spectrometry (Py-GC–MS) to detect MNPs in human liver, kidney and brain, reporting the highest concentrations in the brain, with polyethylene as the predominant polymer. The study as reported appears to face methodological challenges, such as limited contamination controls and lack of validation steps, which May affect the reliability of the reported concentrations. In this Matters Arising, we highlight methodological limitations that have General relevance for advancing robust and reproducible MNP detection in human biomonitoring studies.
KW - Microplastics
KW - Nanoplastics
KW - Py-GC-MS
PY - 2025
DO - https://doi.org/10.1038/s41591-025-04045-3
SN - 1078-8956
VL - 31
IS - 12
SP - 1
EP - 3
PB - Springer Science and Business Media LLC
AN - OPUS4-64698
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - de Oliveira Guilherme Buzanich, Ana
T1 - Bridging Structure and Electronic State: Real-time XES–XRD Fusion for Functional Alloys
N2 - We present a unified X-ray Emission Spectroscopy (XES) and X-ray Diffraction (XRD) approach for real-time, in situ characterization of materials, demonstrated on Co₂FeSi Heusler alloys under varied heat treatments. The combination of XES and XRD is particularly well-suited to Heusler alloys, where subtle changes in atomic ordering and electronic structure (e.g. site occupancy, hybridization, and spin state) are tightly interdependent and critical for their magnetic and transport properties. In addition, this method enables more efficient materials design by reducing experimental iterations through comprehensive structural and electronic analysis. Developed at the mySpot beamline at BESSY-II, the platform integrates (a) digital twin-based experiment planning, (b) open-source XES spectral simulations, (c) an optimized single-shot, two-element XES setup with sub-pixel resolution for enhanced energy precision, and (d) result-driven beamtime utilization. With an unprecedented synchronized XES-XRD platform, we aim to shed light on how diffusion-controlled processes in Heusler alloys and double perovskites at elevated temperatures establish the formation of specific phases with distinct structure types in real time. This, in turn, strongly impacts the functional properties of the materials under scrutiny.
T2 - XLIV Colloquium Spectroscopicum Internationale
CY - Ulm, Germany
DA - 27.07.2025
KW - Multimodal
KW - X-ray spectroscopy
KW - X-ray diffraction
KW - Functional alloys
PY - 2025
AN - OPUS4-63991
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Big to Small - Getting Smarter@BAMline
N2 - In this talk an overview about artificial intelligence/machine learning applications @BAMline is given. In the first part, the use of neural networks for the quantification of XRF measurements and the decoding of coded-aperture measurements are shown. Then it is shown how Gaussian processes and Bayesian statistics can be used to achieve an optimal alignment of the set-up and in general for optimization of measurements.
T2 - Forschungsseminar Institut für Optik und Atomare Physik TU Berlin
CY - Berlin, Germany
DA - 25.10.2022
KW - Artificial Inelligence
KW - Machine Learning
KW - Bayesian Statistics
KW - Gaussian process
KW - Neural network
KW - BAMline
KW - Synchrotron
PY - 2022
AN - OPUS4-56249
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - RPRT
A1 - Kittner, Maria
A1 - Altmann, Korinna
A1 - Hamann, Sven
A1 - Weyer, Rüdiger
A1 - Kalbe, Ute
T1 - Bewertung der Freisetzung von Mikroplastik aus Sportböden auf Kunststoffbasis - Abschlussbericht
N2 - Die Europäische Kommission hat 2023 ein Verbot zum bewussten Austrag von Mikroplastik (MP) in die Umwelt beschlossen, das auch für die Verwendung von synthetischen Gummi-Granulaten (v. a. EPDM) in Sportböden gilt. In Deutschland gibt es laut DFB ca. 5100 Kunstrasenplätze. In der EU beläuft sich die Anzahl laut ECHA auf 13,000 Kunstrasen- und 47,000 Bolzplätze, Tendenz steigend. Das Hauptziel des Projektes war es daher, eine Massenbilanz für die Freisetzung von MP zu erstellen, um so eine Schätzung des MP-Austrags pro Kunstrasenplatz und Jahr zu ermöglichen. Dafür werden die MP-Emissionen von drei Kunstrasenszenarien in verschiedenen Zuständen (ungealtert, künstlich gealtert und in Echtzeit gealtert) verglichen: die Vergangenheit (Kunstrasen: fossilbasiert, EPDM-Füllung), die Gegenwart (der in Europa am häufigsten installierte Rasen) und die Zukunft (Rasen mit recycelten Grasfasern, keine synthetische Füllung sondern z.B. Quarzsand oder Korkschrott). Dazu werden fabrikneue Kunststoffrasen und EPDM-Granulat unter Laborbedingungen beschleunigt gealtert, um die Freiland-Beanspruchung eines Kunststoffrasens in circa 15 Jahren abzubilden. Die Verwendung spezieller Mikrofiltertiegel in Lysimeter-Experimenten ermöglicht die Abschätzung der Partikelgrößen des emittierten MP, was eine Grundbedingung für die Bewertung einer potenziellen Gesundheitsgefährdung für Menschen ist. Ergänzend wurden weitere umweltrelevante Schadstoffausträge aus den Kunststoffrasen quantifiziert.
KW - Mikroplastik
KW - Kunststoffrasen
KW - Schadstoffe
KW - Bewitterung
KW - Lysimeter
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-633114
DO - https://doi.org/10.26272/opus4-63311
N1 - Das Projekt wurde gefördert vom Bundesinstitut für Bau-, Stadt- und Raumforschung (BBSR) im Auftrag des Bundesministeriums für Wohnen, Stadtentwicklung und Bauwesen (BMWSB) aus Mitteln des Innovationsprogramms Zukunft Bau. Aktenzeichen: FKZ 10.08.18.7-22.02. Projektlaufzeit: 09.2022 bis 03.2025.
SP - 1
EP - 75
PB - Bundesanstalt für Materialforschung und -prüfung (BAM)
CY - Berlin
AN - OPUS4-63311
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - BAMline@BESSY2 - Advanced Techniques and Applications
N2 - Synchrotron radiation sources offer a wide range of possibilities in materials research due to their unique properties in terms of intensity, polarization and adjustability. A basic introduction about the creation and special properties of synchrotron radiation will be given. Examples of current work at BAMline, the high-energy measuring facility of the Federal Institute for Materials Research and Testing at the synchrotron BESSY, are used to illustrate the possibilities and limitations of existing measuring methods.”
T2 - GDCH Kolloquium
CY - Clausthal-Zellerfeld, Germany
DA - 17.11.2022
KW - Synchrotron
KW - BAMline
KW - XRF
KW - XANES
PY - 2022
AN - OPUS4-61706
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - de Oliveira Guilherme Buzanich, Ana
A1 - Radtke, Martin
A1 - Yusenko, Kirill
A1 - Stawski, Tomasz
A1 - Kulow, Anicó
A1 - Cakir, Cafer Tufan
A1 - Röder, Bettina
A1 - Naese, Christoph
A1 - Britzke, Ralf
A1 - Sintschuk, Michael
A1 - Emmerling, Franziska
T1 - BAMline - A real-life sample materials research beamline
N2 - With increasing demand and environmental concerns, researchers are exploring new materials that can perform as well or better than traditional materials while reducing environmental impact. The BAMline, a real-life sample materials research beamline, provides unique insights into materials’ electronic and chemical structure at different time and length scales. The beamline specializes in x-ray absorption spectroscopy, x-ray fluorescence spectroscopy, and tomography experiments. This enables real-time optimization of material properties and performance for various applications, such as energy transfer, energy storage, catalysis, and corrosion resistance. This paper gives an overview of the analytical methods and sample environments of the BAMline, which cover non-destructive testing experiments in materials science, chemistry, biology, medicine, and cultural heritage. We also present our own synthesis methods, processes, and equipment developed specifically for the BAMline, and we give examples of synthesized materials and their potential applications. Finally, this article discusses the future perspectives of the BAMline and its potential for further advances in sustainable materials research.
KW - Extended X-ray absorption fine structure
KW - Energy storage
KW - Environmental impacts
KW - Nondestructive testing techniques
KW - X-ray fluorescence spectroscopy
KW - Corrosion
KW - Near edge X-ray absorption fine structure spectroscopy
KW - X-ray absorption spectroscopy
PY - 2023
DO - https://doi.org/10.1063/5.0157194
VL - 158
IS - 24
SP - 1
EP - 22
PB - AIP Publishing
AN - OPUS4-57824
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Altmann, Korinna
T1 - BAM activities on microplastics
N2 - The presentation is about BAM's activities on the topic of microplastics. It describes what BAM has done in this field in recent years. On the one hand, TED-GC/MS is presented as an analytical method, on the other hand, currently available microplastic reference materials are presented.
T2 - JRC/BAM Workshop on ILC
CY - Online meeting
DA - 11.02.2021
KW - Microplastic
KW - TED-GC/MS
KW - Microplastic particles
KW - Reference materials
PY - 2021
AN - OPUS4-52120
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kossatz, Philipp
A1 - Mezhov, Alexander
A1 - Andresen, Elina
A1 - Prinz, Carsten
A1 - Schmidt, Wolfram
A1 - Resch-Genger, Ute
T1 - Assessing the Applicability of Lanthanide-Based Upconverting Nanoparticles for Optically Monitoring Cement Hydration and Tagging Building Materials
N2 - Chemically stable, lanthanide-based photon upconversion micro- and nanoparticles (UCNPs) with their characteristic multicolor emission bands in the ultraviolet (UV), visible (vis), near-infrared (NIR), and short-wave infrared (SWIR) arepromising optical reporters and barcoding tags. To assess the applicability of UCNPs for the monitoring of early stage cement hydration processes and as authentication tags for cementitious materials, we screened the evolution of the luminescence of Selfmade core-only NaYF4:Yb,Er UCNPs and commercial μm-sized Y2O2S:Yb,Er particles during the first stages of cement hydration, which largely determines the future properties of the hardened material. Parameters explored from the UCNP side included particle size, morphology, surface chemistry or coating, luminescence properties, and concentration in different cement mixtures. From the cement side, the influence of the mineral composition of the cement matrix was representatively examined for ordinary Portland cement (OPC) and its constituents tricalcium aluminate (C3A), tricalcium silicate (C3S), and gypsum at different water to cement ratios. Based on reflection and luminescence measurements, enabling online monitoring, which were complemented by XRD and isothermal heat-flow calorimetric measurements to determine whether the incorporation of these particles could impair cement hydration processes, well suited lanthanide particle reporters could be identified as well as application conditions. In addition, thereby the reporter influence on cement hydration kinetics could be minimized while still preserving a high level of information content. The best performance for the luminescence probing of changes during early stage cement hydration processes was observed for 25 nm-sized oleate (OA)-coated UCNPs added in a concentration of 0.1 wt %. Higher UCNP amounts of 1.0 wt % delayed cement hydration processes size- and surface coatingspecifically in the first 24 h. Subsequent luminescence stability screening studies performed over a period of about one year support the applicability of UCNPs as optical authentication tags for construction materials.
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Quantum yield
KW - NIR
KW - Mechanism
KW - Characterization
KW - XRD
KW - Calorimetry
KW - Advanced material
KW - Cement
KW - Monitoring
KW - Surface
KW - Size
KW - Lifetime
KW - Barcode
KW - Lanthanide
KW - Upconversion
KW - Encoding
KW - Method
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-638318
DO - https://doi.org/10.1021/acsomega.5c02236
SN - 2470-1343
VL - 10
IS - 29
SP - 31587
EP - 31599
PB - ACS Publications
CY - Washington, DC
AN - OPUS4-63831
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Radtke, Martin
T1 - Artificial intelligence for spectroscopy examples from BAMline
N2 - Various applications for artificial intelligence in the context of spectroscopy will be presented. in particular, examples from bamline will be featured. After a short introduction to synchrotron radiation, artificial intelligence algorithms for the quantification of X-ray fluorescence measurement are discussed. In the second example, information retrieval by natural language processing is reviewed. As a last example the reconstruction of measurements with the X-ray color camera and coded apertures is presented.
T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin
CY - ATi Wien, Austria
DA - 22.01.2020
KW - Machine learning
KW - Natural language processing
KW - Neural networks
KW - Synchrotron
KW - BAMline
PY - 2020
AN - OPUS4-51891
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Devi, Sarita
A1 - Riedel, Soraya
A1 - Döring, Sarah
A1 - Hiller, Lukas
A1 - Kaliyaraj Selva Kumar, Archana
A1 - Flemig, Sabine
A1 - Singh, Chandan
A1 - Konthur, Zoltán
A1 - Hodoroaba, Vasile-Dan
A1 - Schneider, Rudolf
T1 - Antibodies Functionalized Magnetic Fe-Metal-Organic Framework Based Biosensor for Electrochemical Detection of Tetanus Neurotoxin
N2 - This work presents a metal-organic framework (MOF)-integrated microfluidic flow-cell (MFC) based immunodetection of the tetanus toxoid (TT) using electrochemical technique for the first time. The magnetic property of Fe-MOF helped to hold them on the working electrode at detection zone of MFC surpassing the requirement of additional conjugation chemistry, whereas the conductive property was utilized to observe the change in signal efficiency in the presence of TT. The one-pot hydrothermal synthesis of a magnetic and conductive iron-based MOF (Fe-MOF) was performed using the Fe3 +/Fe2+ precursors as 1.2/1 mmol and dual ligands, i.e., tetrahydroxy-1,4-benzoquinone and 2-aminobenzene-1,4-dicarboxylic acid. The Fe-MOF was conjugated with L-phenylalanine (Fe-MOF/Phe) to increase its electric conductivity owing to the enhanced electron flow rate. The human monoclonal antibody SA13 against TT (anti-TT mAb) was conjugated on the Fe-MOF/Phe surface with the help of ethylenediamine (Fe-MOF/Phe/EDA/anti-TT mAb). The binding affinity of Fe-MOF/Phe/EDA/anti-TT mAb for the TT antigen was evaluated using cyclic voltammetry technique. The limit of detection of the Fe-MOF/Phe/EDA/anti-TT mAb-based biosensor for TT was 9.4 ng/ml in spiked buffer. This study shows the applicability of these Fe-MOFs in the detection of various other microbial toxins or other biomolecules.
KW - Antikörper
KW - Elektrochemischer Immunoassay
KW - Molecular Organic Framework (MOF)
KW - Microfluidics
KW - Rekombinant
PY - 2025
DO - https://doi.org/10.1016/j.snb.2025.137381
SN - 0925-4005
VL - 431
SP - 1
EP - 12
PB - Elsevier B.V.
CY - Amsterdam
AN - OPUS4-62673
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CHAP
A1 - Radtke, Martin
A1 - Reinholz, Uwe
A1 - Guerra, M.F.
A1 - Martinón-Torres, M.
A1 - Lemasson, Q.
A1 - Moignard, B.
A1 - Pacheco, C.
A1 - Pichon, L.
A1 - Macdonald, L.
A1 - Hess, M.
A1 - Tissot, I.
ED - Guerra, M. F.
ED - Martinón-Torres, M.
ED - Quirke, S.
T1 - Analytical approaches to Egyptian goldwork
N2 - The structure and composition of ancient gold objects retain information about their long history of manufacture, from the exploitation of the ore to the finishing touches, as well as evidence of their use, deposition, and degradation. By developing an efficient analytical strategy, it is possible to retrieve that information. This chapter sets the necessary foundation 131to explore fully the analytical results presented in the following chapters of this volume. The techniques employed in the analyses of the Egyptian jewellery are described and the analytical parameters provided. For more established techniques, only brief introductions are presented, while more recent developments are presented in greater detail.
KW - Gold
KW - Synchrotron
KW - D2XRF
KW - Egypt
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-586039
DO - https://doi.org/10.17863/CAM.99681
SP - 131
EP - 191
AN - OPUS4-58603
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Cakir, Cafer Tufan
T1 - Algorithm-Assisted Multimodal Synchrotron Experiments: XRD–XES Integration and SpecTwin
N2 - Multimodal synchrotron-based techniques are emerging as powerful tools for advanced materials characterization, enabling simultaneous insights into both crystal and electronic structure. We present a combined X-ray diffraction (XRD) and high-resolution X-ray emission spectroscopy (XES) approach implemented in a double-dispersive setup. This configuration enables simultaneous acquisition of structural and spectroscopic information with high precision, allowing us to resolve correlations between lattice arrangements and electronic configurations under in situ conditions.
To enhance experimental throughput and reproducibility, we employ digital twin concepts and optimization algorithms for experiment design and parameter control. These methods effectively eliminate trial-and-error procedures when optimizing the setup to achieve the desired resolution for XES analysis. In addition, we introduce SpecTwin, a dedicated software environment that integrates XES data analysis, simulation, and optimization routines.
This combined methodology underscores the potential of algorithm-assisted multimodal X-ray experiments to advance the quantitative understanding of structure–property relationships in complex materials.
T2 - Joint BAM-HZB Symposium on Multimodal Synchrotron Experiments for Next-Generation Materials Research
CY - Berlin, Germany
DA - 25.02.2026
KW - XAS
KW - Digital Twin
KW - Optimization
KW - Multimodal
PY - 2026
AN - OPUS4-65608
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Frisch, M.
A1 - Raza, M. H.
A1 - Ye, M.-Y.
A1 - Sachse, René
A1 - Paul, B.
A1 - Gunder, R.
A1 - Pinna, N.
A1 - Kraehnert, R.
T1 - ALD-coated mesoporous iridium-titanium mixed oxides: Maximizing iridium utilization for an outstanding OER performance
N2 - With the increasing production of renewable energy and concomitant depletion of fossil resources, the demand for efficient water splitting electrocatalysts continues to grow. Iridium (Ir) and iridium oxides (IrOₓ) are currently the most promising candidates for an efficient oxygen evolution reaction (OER) in acidic medium, which remains the bottleneck in water electrolysis. Yet, the extremely high costs for Ir hamper a widespread production of hydrogen (H₂) on an industrial scale. Herein, the authors report a concept for the synthesis of electrode coatings with template-controlled mesoporosity surface-modified with highly active Ir species. The improved utilization of noble metal species relies on the synthesis of soft-templated metal oxide supports and a subsequent shape-conformal deposition of Ir species via atomic layer deposition (ALD) at two different reaction temperatures. The study reveals that a minimum Ir content in the mesoporous titania-based support is mandatory to provide a sufficient electrical bulk conductivity. After ALD, a significantly enhanced OER activity results in dependency of the ALD cycle number and temperature. The most active developed electrocatalyst film achieves an outstanding mass-specific activity of 2622 mA mg(Ir)⁻¹ at 1.60 V(RHE) in a rotating-disc electrode (RDE) setup at 25 °C using 0.5 m H₂SO₄ as a supporting electrolyte.
KW - Acidic oxygen evolution reaction
KW - Atomic layer deposition
KW - Electrocatalysis
KW - Iridium oxide
KW - Soft-templated mesoporous films
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-542651
DO - https://doi.org/10.1002/admi.202102035
SN - 2196-7350
SP - 1
EP - 11
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-54265
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Dittmann, Daniel
T1 - Aktivkohlecharakterisierung von GAK-Filtern bei unterschiedlichen Laufzeiten
N2 - Eine umfangreich ausgestaltete Trinkwasseraufbereitung als Multibarrieren-System ist notwendig, wenn das Rohwasser direkt aus Fließgewässern entnommen wird (z. B. für das Mülheimer Verfahren). Eine der Barrieren wird, als gezielte Behandlungs- oder Sicherheitsstufe, oft als Filter mit granulierter Aktivkohle (GAK-Filter) realisiert. Ihre Standzeit kann bei geringer Wasserbelastung (DOC < 2 mg/L), z. B. bei der Landeswasserversorgung Langenau, bis zu 5 Jahre betragen. Bei Rohwasser mit höherem Organikgehalt (DOC > 7 mg/L), wie bei der Nordwasser in Rostock, wird hingegen mindestens alle drei Jahre die GAK in den Filterkolonnen ausgetauscht.
Die Rest-Adsorptionskapazität der GAK kann durch verschiedene Verfahren abgeschätzt werden, ist aber nach wie vor Gegenstand aktueller Forschung. Die weitergehende Charakterisierung der beladenen GAK kann hierbei helfen.
Auf dem Poster sollen erste Ergebnisse zu den in Langenau und Rostock eingesetzten Aktivkohlen präsentiert werden. Hierzu wurden die frischen und nach unterschiedlichen Laufzeiten beladenen GAK untersucht. Die Zusammensetzung der Anorganik und der adsorbierten Organik, welche mittels Zersetzungs¬gasanalyse charakterisiert wurde, zeigt deutliche Unterschiede. Bspw. nimmt der Calcium-Gehalt der GAK in Langenau kontinuierlich zu, wohingegen dieser in den Proben aus Rostock mit zunehmender Laufzeit zurückgeht. Umgekehrt verhält es sich mit der Organik: Die GAK aus Rostock zeigen Hinweise auf biologische Besiedelung, während diese in Langenau trotz längerer Filterlaufzeit auszubleiben scheint.
T2 - 4. Mülheimer Wasseranalytisches Seminar (MWAS2020)
CY - Mülheim an der Ruhr, Germany
DA - 16.09.2020
KW - Thermogravimetrie
KW - Trinkwasser
KW - Wasseraufbereitung
KW - Aktivkohle
PY - 2020
AN - OPUS4-51433
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Putzu, Mara
A1 - Barbaresi, Marta
A1 - Fadda, Marta
A1 - Sacco, Alessio
A1 - Piergiovanni, Maurizio
A1 - Masino, Matteo
A1 - Bianchi, Federica
A1 - Altmann, Korinna
A1 - Benismail, Nizar
A1 - Coïc, Laureen
A1 - Fenoglio, Ivana
A1 - Mattarozzi, Monica
A1 - Rossi, Andrea Mario
A1 - Careri, Maria
A1 - Giovannozzi, Andrea Mario
T1 - Accuracy assessment of a micro-Raman spectroscopy method for small microplastic particles in infant milk formula
N2 - The presence of microplastics (MPs) in the food chain is increasingly documented, raising concerns over potential risks to human health. Despite growing efforts, standardized methods for MPs detection in food matrices remain limited. This study presents an interlaboratory comparison (ILC) aimed at assessing the accuracy and comparability of an analytical approach for the identification and quantification of small MPs (5–100 μm) in infant milk powder using μ-Raman spectroscopy and a representative polyethylene terephthalate (PET) reference material (RM). The RM, formulated as water-soluble tablets, was designed to replicate the morphology, size distribution, and polymer composition of environmentally relevant MPs, and was previously assessed for homogeneity and stability for mass fraction and particle numbers. The approach was assessed using two PET RM batches with different MPs particle numbers (high load batch: 1759 ± 141 MPs; low load batch: 160 ± 22 MPs), subjected to an enzymatic–chemical digestion, followed by μ-Raman analysis performed independently in two laboratories with different instruments and operators. Results are reported as absolute particle counts per analyzed sample and demonstrated excellent recovery across all size classes, including the smallest particles (down to 5 μm), with recovery rates ranging from 82 % to 88 %, in good agreement with the RM reference values. The analytical approach proved to be robust, reproducible, and suitable for low-level MPs quantification in complex food matrices, supporting ongoing efforts toward method harmonization and standardization for reliable MPs monitoring in the food sector.
KW - Microplastics
KW - Milk
KW - Raman microspectroscopy
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-646239
DO - https://doi.org/10.1016/j.talo.2025.100586
SN - 2666-8319
VL - 12
SP - 1
EP - 8
PB - Elsevier B.V.
AN - OPUS4-64623
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
A1 - Meyer, A.
T1 - About Polycondensation, Disproportionation, and Cyclization of Acetylated Poly(L-Lactide) Esters
N2 - L-lactide (LA) is polymerized with ethyl L-lactate or trifluoroethanol as initiators (LA/In = 30/1), and the resulting poly(L-lactide) esters are acetylated with acetic anhydride. The acetylated PLA esters are mixed with SnOct2, dibutyltin bis(4-chlorophenoxide), or dibutyltin bis(pentafluorophenoxide) in solution and crystallized at 120 °C. The doped crystals are annealed at 140 °C or at 160 °C for 7, 14, and 28 days, and the chemical modifications that occurred in the solid state are monitored by matrix-assisted laser desorption/ionization time-of-flight (MALDI TOF) mass spectrometry, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC) measurements. All catalysts promoted polycondensation, while no significant formation of cycles is observed. However, in the presence of SnOct2, disproportionation of chains occurred upon annealing at 120 or 140 °C, and crystallites consisting of extended chains with Mn values ≈3500 – 3600 and low dispersities (Ð < 1.5) are formed.
KW - MALDI-TOF MS
KW - Polycondensation
KW - Polylactides
KW - Transesterifcation
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630349
DO - https://doi.org/10.1002/macp.202400175
SN - 1521-3935
VL - 225
IS - 19
PB - Wiley VHC-Verlag
AN - OPUS4-63034
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H.
A1 - Weidner, Steffen
A1 - Meyer, A.
T1 - About alcohol-initiated polymerization of glycolide and separate crystallization of cyclic and linear polyglycolides
N2 - Alcohol-initiated polymerizations of glycolide (GL) catalyzed by tin(II) 2-ethylhexanoate (SnOct2) were carried out in bulk with variation of GA/In ratio, temperature and time. Due to a rather strong competition of cyclization polyglycolide (PGA) free of cycles were never obtained. When the cyclic catalysts 2,2-dibutal-2-stanna − 1,3-dithiolane (DSTL) or 2-stanna 1,3-dioxo-4,5,6,7 bibenzepane (SnBiph) were used in combination with 1,4-butanediol the influence of cyclization was even stronger. Furthermore, the degrees of polymerization were higher than the GA/alcohol ratio due to rapid polycondensation in the solid state. At 160 °C or below, the matrixassisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectra indicated separate crystallization of low molar mass cyclic and linear PGAs from the same reaction mixture (also observed for poly(L-lactide)s).
KW - MALDI TOF MS
KW - Polyglycolide
KW - Ring opening polymerization
KW - Cyclization
KW - Crystallization
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-607282
DO - https://doi.org/10.1016/j.polymer.2024.127440
SN - 0032-3861
VL - 309
SP - 1
EP - 9
PB - Elsevier Ltd.
AN - OPUS4-60728
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Brinkmann, A.
T1 - A qNMR Method for Quantification of Surface Functional Groups on Silica Nanoparticles: Bilateral Comparisons
N2 - Nanomaterials (NM) of different size, shape, morphology, composition, and surface chemistry are used in a wide range of applications, including medical diagnostics, and imaging and consumer products. The importance of an adequate and reliable characterization is crucial for quality control during NM production, for ensuring an optimum function for the desired application, and for risk assessment studies. Currently there is a lack of reliable and validated methods and reference materials for quantifying NM surface functional groups, despite the importance of surface chemistry for the production of colloidally stable materials, further processing steps, and the interaction with the environment and biological species.
Following our initial study on the use of qNMR for quantifying the amount of amino groups on surface modified silica (1), we have carried out two bilateral comparisons between NRC and BAM to further develop and optimize a reliable protocol for these measurements (2,3), using aminated silica nanoparticles prepared by multiple methods, both commercial and in-house synthesized, and with varying amine content. Solution qNMR is based on dissolving aminated silica nanoparticles in strong base to release the surface grafted amino silane molecules, followed by the quantification of these molecules by solution qNMR using an internal standard. This method provides the amount of total amino groups present in the sample, which can differ from probe accessible or surface-sensitive measurements performed with X-Ray photoelectron spectroscopy (XPS). Complementary measurements using optical assays, involving a labeling step with a dye reporter, and XPS are employed to assess the probe accessible and surface amine content for representative samples. These measurements, which illustrate the advantages and potential limitations of the different characterization methods, will contribute to establish a basis for testing the protocol in an international inter-laboratory comparison and for standardization at ISO Technical Committee 229 – Nanotechnologies.
T2 - BERM
CY - Halifax, Canada
DA - 01.06.2025
KW - Quality assurance
KW - Nano
KW - Particle
KW - Synthesis
KW - Advanced materials
KW - Characterization
KW - Electron microscopy
KW - Silica
KW - Surface
KW - qNMR
KW - Optical assay
KW - Interlaboratory comparison
KW - Metrology
KW - Standardization
PY - 2025
AN - OPUS4-63527
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wiesner, Yosri
A1 - Bednarz, Marius
A1 - Braun, Ulrike
A1 - Bannick, Claus Gerhard
A1 - Ricking, Mathias
A1 - Altmann, Korinna
T1 - A promising approach to monitor microplastic masses in composts
N2 - Inputs of plastic impurities into the environment via the application of fertilizers are regulated in Germany and the EU by means of ordinances. Robust and fast analytical methods are the basis of legal regulations. Currently, only macro- and large microplastic contents (>1 mm) are measured. Microplastics (1–1,000 µm), are not yet monitored. Thermal analytical methods are suitable for this purpose, which can determine the mass content and can also be operated fully automatically in routine mode. Thermal extraction desorption-gas chromatography/mass spectrometry (TED-GC/MS) allows the identification of polymers and the determination of mass contents in solid samples from natural environments. In accordance with the German or European Commission (EC) Fertiliser Ordinance, composting plants should be monitored for microplastic particles with this method in the future. In this context a compost plant was sampled. At the end of the rotting process, the compost was sieved and separated in a coarse (>1 mm) and a fine fraction (<1 mm). The fine fraction was processed using density separation comparing NaCl and NaI as possible salt alternative and screened for microplastic masses by TED-GC/MS with additional validation and quality assurance experiments. With TED-GC/MS total microplastics mass contents of 1.1–3.0 μg/mg in finished compost could be detected with polyethylene mainly. What differs much to the total mass of plastics in the coarse fraction with up to 60 μg/mg, which were visually searched, identified via ATR-FTIR and gravimetrically weighted.
KW - Microplastics
KW - TED-GC/MS
KW - Compost
KW - Monitoring
KW - Soil
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-586688
DO - https://doi.org/10.3389/fenvc.2023.1281558
SN - 2673-4486
VL - 4
SP - 1
EP - 12
PB - Frontiers Media
CY - Lausanne
AN - OPUS4-58668
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Fink, Friedrich
A1 - Stawski, Tomasz M.
A1 - Emmerling, Franziska
A1 - Falkenhagen, Jana
T1 - A novel machine-learning approach to unlock technical lignin classification by NIR spectroscopy - bench to handheld
N2 - In this research, the utilization of near-infrared (NIR) spectroscopy in conjunction with advanced machine learning methods is investigated for categorizing technical lignins obtained from different biomass sources and industrial procedures. Technical lignins, such as kraft, organosolv and lignosulfonates, have different chemical compositions, which continue to make uniform characterization and application in sustainable sectors extremely difficult. Fast, universally accessible analytics combined with data analysis is still an open question. For the first time three distinct NIR spectrometers—a high-performance benchtop system, a mid-priced compact device, and an economical handheld unit—were utilized to record NIR spectra of 31 unique lignin samples. The spectra underwent pre-processing through standard normal variate (SNV) transformation and Savitzky-Golay derivatives to amplify spectral features and decrease noise. Principal component analysis (PCA) was employed to reduce data complexity and extract crucial characteristics for classification purposes. Subsequently, four machine learning algorithms—Support Vector Machines (SVM), Gaussian Naive Bayes (GNB), Gaussian Process Classification (GPC), and Decision Tree Classification (DTC)—were implemented for the classification of the lignin samples. The DTC model exhibited the highest accuracy among them across different spectrometers. Although the benchtop spectrometer produced the most precise outcomes, the compact NeoSpectra system also displayed potential as a cost-efficient option. Nonetheless, the restricted spectral coverage of the handheld NIRONE spectrometer resulted in reduced classification accuracy. Our discoveries highlight the capability of NIR spectroscopy, combined with robust data analysis techniques, for the swift and non-destructive classification of technical lignins, facilitating their improved utilization in sustainable fields.
KW - Technical lignins
KW - NIR spectroscopy
KW - Classification
KW - Machine-learning
KW - PCA
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634518
DO - https://doi.org/10.1016/j.chemolab.2025.105467
SN - 0169-7439
VL - 264
SP - 1
EP - 10
PB - Elsevier B.V.
CY - Amsterdam
AN - OPUS4-63451
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -