TY - CONF A1 - Kricheldorf, H. R. T1 - Reversible Polycondensations and the Jacobson-Stockmayer Theory N2 - Reversible polycondensations are polycondensations that include equilibration reactions at any stage of the process. Syntheses of Polyesters in bulk involving transesterification reactions and syntheses of polyamides in bulk involving transamidation are typical examples. In 1950, Jacobson and Stockmayer published a first theory of reversible polycondensations based on experimental studies with aliphatic polyesters.[1,2] They explained the reversibility by the reversible formation of cyclic oligomers and low molar mass polymers from an active chain end (so-called “back-biting”). The formation of cycles via end-to-end cyclization was excluded in agreement with Flory´s theory of irreversible polycondensations.[3] The reinvestigation of the Jacobson-Stockmayer experiments by the authors in combination with theoretical considerations shows that the JS theory is wrong. [4,5] It turned out that the experimental scenario is far from the reality. In real polycondensations, intermolecular equilibration is faster than “back-biting”, and end-to-end cyclization is quite normal. The revised theory of step-growth polymerization predicts that in the ideal case of 100% conversion, all reaction products are cycles, regardless, of whether the step-growth polymerization is reversible or not. T2 - Polycondensation 2024 CY - Lyon, France DA - 15.09.2024 KW - Polycondensation KW - Cyclisation KW - MALDI TOF MS PY - 2024 UR - https://polycond-2024.sciencesconf.org/ AN - OPUS4-61070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stolar, Tomislav T1 - Waste to value: upcycling PET bottles into MOFs using mechanochemistry N2 - Single-use plastics are causing plastic pollution, and less than 10% of plastic waste gets recycled globally. Most of it ends up in landfills or gets incinerated in a highly unsustainable manner. Here, I will present a sustainable mechanochemical protocol for the chemical upcycling of waste polyethylene terephthalate (PET) bottles to porous UiO-66 metal-organic framework (MOF). We used in situ and ex situ characterization to gain a deep understanding of the underlying mechanochemical process leading to high crystallinity and -porosity UiO-66. Our results show the potential of mechanochemistry for the sustainable production of high-quality value-added materials such as UiO-66 from waste PET bottles. T2 - 2024 Green Chemistry Gordon Research Conference CY - Barcelona, Spain DA - 31.07.2024 KW - Mechanochemistry KW - Plastic recycling KW - Circular economy PY - 2024 AN - OPUS4-62107 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kromm, Arne T1 - Effect of a High-Performance Modified Spray Arc MAG Process on Load-Oriented Repair of Old Steel Structures N2 - Steel structures erected in the late 19th and early 20th centuries still constitute a substantial part of today’s technical infrastructure. A significant proportion of bridge and engineering structures have been in service for more than 80 or even 100 years and are subjected to continuously increasing traffic volumes, axle loads, and dynamic actions. In view of these rising service demands, load-oriented and structurally adequate repair strategies are essential to ensure long-term structural integrity while preserving the existing building stock in a sustainable manner. As historical steel constructions were predominantly designed for riveted or bolted joints, the subsequent implementation of welded repair or strengthening measures represents a particular challenge. In addition to the specific material characteristics of old mild steels, welding-induced residual stresses and microstructural alterations must be carefully considered, as they can significantly affect load-bearing capacity and the overall structure performance. Consequently, repair concepts must not only restore geometry but also be adapted to the actual stress conditions and service requirements of the structure. Against this background, the present study investigates MAG welding trials on mixed joints between old and modern structural steels. The groove opening angle was systematically varied between 50° and 30° in order to analyse the influence of joint geometry on weld metal volume, heat input, and the resulting residual stress state. Furthermore, advanced high-performance arc processes, such as a modified spray arc mode, were applied to enable controlled and reduced heat input. The objective is to minimise welding-induced residual stresses through process and joint design optimisation, thereby providing a technically sound and load-oriented repair strategy for existing old steel structures suitable for long-term service. T2 - IIW Intermediate Meeting, Commission II-E CY - Bangkok, Thailand DA - 16.03.2026 KW - Historic mild steel KW - Weldability KW - High strength steel PY - 2026 AN - OPUS4-65745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Avila Calderon, Luis Alexander T1 - On the role of the manufacturing-induced cell structure in laser-powder-bed-fused stainless steel 316L during cyclic plastic deformation N2 - The room temperature cyclic plastic deformation behavior of stainless steel 316L produced by laser powder bed fusion and heat treated to two microstructural conditions was investigated in strain-controlled incremental-step-test low-cycle fatigue experiments. The heat treatments were performed at 450 °C for 4 h and at 900 °C for 1 h. The lower temperature heat treatment retains the cell structure present in the as-built material. The higher temperature heat treatment leads to disappearance of the cell structure and a decreased proof strength. Both investigated heat treatment conditions exhibited cyclic softening. In the condition heat treated at 900 °C for 1 h, the ability of the cell structure to act as barrier against plastic deformation when cyclically strained is degraded, which is reflected in the reduction of the cyclic yield strength. In that same condition, the cyclic softening was less pronounced. The presence or absence of the manufacturing-induced cell structure seems to determine the slip mode. When present, the microstructural evidence points to a planar slip behavior. After heat treatment at 900 °C for 1 h, which led to its dissolution, microstructural investigations revealed a wavy slip behavior, which has been also reported for the conventionally manufactured 316L counterpart [1]. In this case, the formation of low-energy dislocation structures acts as softening agent. T2 - Additive Manufacturing 2026 CY - Kassel, Germany DA - 25.03.2026 KW - AGIL KW - Additive Fertigung KW - Low-Cycle-Fatigue KW - 316L KW - Mikrostruktur PY - 2026 AN - OPUS4-65746 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stolar, Tomislav T1 - Mechanochemical Conversion Of Polyethylene Terephthalate Into Valuable Metal-organic Frameworks N2 - Single-use plastics are causing plastic pollution, and less than 10% of plastic waste is recycled globally. Here, we present a sustainable mechanochemical protocol for converting post-consumer polyethylene terephthalate (PET) textile and bottles into the porous metal-organic framework (MOF) UiO-66. We used time-resolved in situ synchrotron powder X-ray diffraction and Raman spectroscopy to monitor the depolymerization of PET during ball milling with sodium and potassium hydroxide and water as a liquid additive. For synthesizing UiO-66, we focused on the better performing sodium hydroxide and optimized two distinct synthetic routes to produce high-quality UiO-66. Our results demonstrate the potential of mechanochemistry to enable more circular MOF synthesis using post-consumer PET waste. T2 - International Conference on Sustainable Chemistry for Net Zero CY - St. Andrews, United Kingdom DA - 10.06.2025 KW - Mechanochemistry KW - Plastic recycling KW - Circular economy PY - 2025 AN - OPUS4-63944 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bayat, Mehmet Emin A1 - Nandayapa, Edgar R. A1 - Tiebe, Carlo A1 - Unger, Eva L. A1 - List-Kratochvil, Emil J. W. T1 - An operando spectroscopic examination of the influence of trace humidity on interdigital back contact metal halide perovskite solar cells N2 - Controlling trace humidity is vital for both the fabrication and long-term stability of metal halide perovskite (MHP) solar cells. Relevant humidity levels are typically below 10 ppmV, especially in glovebox-based processing and in well-encapsulated devices. Even minute amounts during fabrication can influence crystallization, introducing defects and lowering efficiency. Over time, humidity accelerates degradation of the perovskite layer and internal interfaces, ultimately reducing operational lifetime. Probing these effects at low concentrations under operando conditions is therefore essential for advancing device performance and durability. In this work, we employed a high-precision transfer standard dew point hygrometer to investigate humidity levels between 5 and 35 ppmV in non-encapsulated MHP solar cells. To permit unobstructed water migration during operation, we fabricated interdigital back contact devices. Operando measurements revealed water transport through the perovskite layer and enabled quantification of outgassing. Under trace-humidified conditions, devices exhibited initial charge-carrier quenching, followed by gradual recovery. Notably, the photocurrent response to humidified nitrogen demonstrated that the MHP layer behaves fully reversibly within the explored timescale and across the investigated humidity levels and conditions. These findings establish a systematic operando framework for examining extrinsic stressors in perovskites and highlight opportunities for assessing passivation strategies. KW - Metal halide perovskite KW - IBC solar cells KW - In operando KW - Extrinsic stressors KW - Fabrication and encapsulation KW - Trace humidity KW - Two-site Stern-Volmer KW - Charge-carrier quenching PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657560 DO - https://doi.org/10.1039/D6TA01295G SP - 1 EP - 16 PB - The Royal Society of Chemistry CY - London AN - OPUS4-65756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Serrano-Munoz, Itziar A1 - Dufrenoy, Philippe A1 - Magnier, Vincent T1 - Rationalizing the microstructure interplay in the thermal conductivity of a metal matrix composite via 3D imaged-based finite element modeling N2 - The thermal performance of metallic brake lining materials plays a decisive role in the safety and efficiency of high-speed railway braking systems. In this study, a combined experimental–numerical methodology is developed to rationalize the influence of microstructural constituents on the effective thermal conductivity of a sintered metal matrix composite (MMC) brake lining. Laser Flash Analysis (LFA) is first employed to determine the thermal conductivity of some individual constituents as well as that of reference composites. X-ray CT (XCT) provides three-dimensional reconstructions of the microstructure that are subsequently used to generate realistic image-based finite element meshes. The unknown thermal conductivities of the graphite particles are identified through a Finite Element Model Updating (FEMU) scheme, where numerical predictions of the effective conductivity are iteratively matched to LFA measurements. These findings highlight the strong anisotropy of graphite particles and their favored orientation after compaction, which governs heat transport pathways. Moreover, the presence of intra-, inter-, and inter-connectivity porosity within and around the graphite is shown to significantly reduce the transverse conductivity, rationalizing the discrepancy between the FEM predictions and experimental values. Overall, the proposed approach demonstrates how combining LFA, XCT and FEMU enables the identification of constituent-level conductivities and provides new insights into the microstructure/thermal-property relationships of MMC brake linings. KW - Brake lining material KW - Thermal conductivity KW - Graphite particles KW - Laser flash analysis (LFA) KW - X-ray computed tomography (XCT) KW - 3D finite element model updating (FEMU) PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657756 UR - https://www.sciencedirect.com/science/article/pii/S0017931026004114?via%3Dihub DO - https://doi.org/10.1016/j.ijheatmasstransfer.2026.128735 SN - 0017-9310 VL - 264 SP - 1 EP - 14 PB - Elsevier Ltd. AN - OPUS4-65775 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meng, Xiangmeng A1 - Bachmann, Marcel A1 - Yang, Fan A1 - Rethmeier, Michael T1 - Porosity prediction in laser beam welding with a multimodal physics-informed machine learning framework N2 - Laser beam welding (LBW) of metallic components is a knowledge‑intensive manufacturing process whose quality depends on the complex multi‑physics. However, its engineering application is often hindered by the occurrence of porosity defects. Achieving a thorough understanding and reliable prediction of porosity defects remains difficult because it demands robust representation and reasoning over nonlinear and hard‑to‑observe physical information. In this study, we propose an integrated multimodal physics-informed machine learning (PIML) framework with the help of multi-physical modelling and experimental data to predict the porosity defects in laser beam welding of aluminum alloys. The whole framework contains a multimodal PIML model for predicting the porosity ratio and an ML-based estimator for relevant physical information. By utilizing the scalar welding parameters and high-dimensional physical information (probability of keyhole collapses, cumulative existing time of collapses, and molten pool geometry) as inputs, the multimodal PIML model shows great superiority in predicting the porosity ratio, with a reduction of the mean square error by 45%, compared with the ML model trained only with welding parameters. The ML-based estimator constructed with an encoder‐decoder architecture can accurately reproduce the critical physical information within a timeframe of seconds. By integrating these two ML models, the proposed framework advances engineering informatics by offering a scalable, physics-knowledge‑centric solution for fast and accurate porosity prediction in LBW manufacturing. KW - Laser beam welding KW - Porosity defect KW - Physics-informed machine learning KW - Multimodal model KW - Simulation PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657589 DO - https://doi.org/10.1016/j.aei.2026.104611 SN - 1474-0346 VL - 74 SP - 1 EP - 12 PB - Elsevier Ltd. AN - OPUS4-65758 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Riechers, Birte A1 - Pekin, Thomas C. A1 - Luo, Xin-Yu A1 - Sun, Yonghao A1 - Koch, Christoph T. A1 - Derlet, Peter M. A1 - Maaß, Robert T1 - Spatial distribution and connectivity of medium-range order signatures in a metallic glass probed with simulated and experimental 4DSTEM N2 - challenge. Here, we assess the statistical signature of local diffraction symmetries and their spatial distribution obtained with transmission electron microscopy in both experimentally cast Pd-based MGs and simulated binary model glasses. A detailed analysis of diffraction symmetries from the model glass shows that microstructural coarsening is dominated by icosahedra and Frank–Kasper polyhedra. While symmetries for these motifs are less significant for the laboratory-cast Pd-based glass, clear signatures of symmetry-cluster coarsening as a function of relaxation state are observed in both experiments and simulations, without any indications for crystallization. These findings give support for a qualitatively similar evolution of a glassy microstructure at the medium-range order length scale during glass relaxation. KW - Metallic glass KW - TEM KW - Molecular dynamics simulations KW - Glass structure PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-657772 DO - https://doi.org/10.1016/j.jallcom.2026.186631 SN - 0925-8388 VL - 1058 SP - 1 EP - 10 PB - Elsevier B.V. AN - OPUS4-65777 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bayat, Mehmet Emin A1 - Nandayapa, Edgar R. A1 - Tiebe, Carlo A1 - Unger, Eva L. A1 - List-Kratochvil, Emil J. W. T1 - Raw data from: "An operando spectroscopic examination of the influence of trace humidity on interdigital back contact metal halide perovskite solar cells" N2 - Controlling trace humidity is vital for both the fabrication and long-term stability of metal halide perovskite (MHP) solar cells. Relevant humidity levels are typically below 10 ppmV, especially in glovebox-based processing and in well-encapsulated devices. Even minute amounts during fabrication can influence crystallization, introducing defects and lowering efficiency. Over time, humidity accelerates degradation of the perovskite layer and internal interfaces, ultimately reducing operational lifetime. Probing these effects at low concentrations under operando conditions is therefore essential for advancing device performance and durability. In this work, we employed a high-precision transfer standard dew point hygrometer to investigate humidity levels between 5 and 35 ppmV in non-encapsulated MHP solar cells. To permit unobstructed water migration during operation, we fabricated interdigital back contact devices. Operando measurements revealed water transport through the perovskite layer and enabled quantification of outgassing. Under trace-humidified conditions, devices exhibited initial charge-carrier quenching, followed by gradual recovery. Notably, the photocurrent response to humidified nitrogen demonstrated that the MHP layer behaves fully reversibly within the explored timescale and across the investigated humidity levels and conditions. These findings establish a systematic operando framework for examining extrinsic stressors in perovskites and highlight opportunities for assessing passivation strategies. KW - Metal halide perovskite PY - 2026 DO - https://doi.org/10.5281/zenodo.18600851 PB - Zenodo CY - Geneva AN - OPUS4-65757 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, Martin T1 - (K)ein explosives Thema? - Schweißen an und auf zukünftigen Wasserstoffpipelines im Betrieb unter Druckgasfluss N2 - Das Schweißen an druckführenden Leitungen im Betrieb ist beim Erdgas-Fernleitungsnetz Stand der Technik, beispielsweise beim Setzen von Abgängen durch „Hot-Tapping“. Diese Technik wird auch beim zukünftigen Wasserstoff-Kernnetz eine bedeutende Rolle spielen. Verfahrensbedingt ist daher eine bestimmte Wasserstoffaufnahme während des Schweißens unvermeidbar. Aus diesem Grund werden derzeit in mehreren Forschungsprojekten wie umfassende Erkenntnisse zum Schweißen an Rohrleitungen unter Druckwasserstoff gewonnen. Die grundsätzliche Übertragbarkeit des „Hot-Tapping“ auf zukünftige Wasserstoff-Rohrleitungen wurde bereits bestätigt (u. a. DNV-Projekt und HyTap). Allerdings besteht allein das zukünftige Wasserstoff-Kernnetz in Deutschland aus einer Vielzahl von Bestands- und Neuwerkstoffen mit unterschiedlichen Festigkeiten, Durchmessern und Wandstärken. Für diese ist eine umfassende Betrachtung notwendig. In diesem Bereich leistet das Projekt H2-SuD wesentliche Beiträge, insbesondere zur Frage der Anpassung der Mindestwandstärke für sicheres Schweißen. Hierzu bieten die Demonstratoren eine ideale Grundlage zum Screening vieler Schweißparameter-Werkstoff-Kombinationen. Eine erhöhte Wasserstoffkonzentration beim Schweißen wurde experimentell belegt (DNV-Projekt und H2-SuD), allerdings im allgemein nicht als kritisch erachteten Bereich. Zudem wurde eine Wasserstoffversprödung der Schweißnaht während des Schweißens an druckwasserstoffführenden Demonstratoren bisher nicht beobachtet. Dies liegt u.a. an den mechanischen Eigenschaften der Rohrleitungswerkstoffe (gute Dehnfähigkeit, auch im geschweißten Zustand). T2 - Vortragsreihe des Bezirksverbandes Berlin des Deutschen Verbandes für Schweißen und verwandte Verfahren (DVS) e.V. CY - Berlin, Germany DA - 25.03.2026 KW - Wasserstoff KW - Rohrleitung KW - Schweißen KW - Demonstrator KW - Bauteilprüfung PY - 2026 AN - OPUS4-65774 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -