TY - CONF A1 - Piechotta, Christian T1 - Mass spectrometric elucidation of electron ionization induced fragmentation pathways of methylated warfarin and selected hydroxylated species N2 - Warfarin (Coumadin) is one of the most popular anticoagulant drugs used as a therapeutic in humans to prevent thrombosis, atrial fibrosis, and fibrillation since the 1950s. Because of its ability to hinder blood coagulation by blocking vitamin K-depending carboxylation of blood clotting precursors, it is also used as a rodenticide worldwide. Until today it has been partially substituted by far more potent anticoagulant rodenticides (ARs), so-called superwarfarins. Numerous studies are confirming secondary and tertiary poisoning with ARs in non-target-animals and wildlife. Up to now, relatively little is known about persistence and toxicity of ARs and naturally, nor technically formed transformation products (TPs) in the environment, food chain, and transformations occurring during wastewater treatment. Herein, we present liquid and gas chromatographic methods coupled to (high-resolution) mass spectrometry for the analysis of warfarin’s transformation products. Methodologies such as UV-irradiation, ozonation, and chlorination were utilised to simulate technical water treatment. Resulting compounds were elucidated and examined by numerous analytical methods. Moreover, the oxidative phase I metabolism was mimicked by an electrochemical flow cell to synthesise and confirm major metabolites. The further aim is the toxicological assessment of all substances formed, as well as, the quantification of warfarin and its TPs under environmentally relevant conditions employing the introduced methods. T2 - SETAC 2024 CY - Sevilla, Spain DA - 05.06.2024 KW - Mass spectrometry KW - Warfarin PY - 2024 AN - OPUS4-61902 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Olbrich, Adelina-Elisa T1 - Material vs. Environment: Uncovering microbiological influenced corrosion processes on steel with single cell-ICP-ToF-MS N2 - Microbiologically influenced corrosion (MIC) is a highly unpredictable process dictated by the environment, microorganisms, and the respective electron source. Interaction pathways between cells and the metal surface remain unclear. The development of this novel single cell-inductively coupled plasma-time of flight-mass spectrometry analytical method and a MIC-specific staining procedure facilitate the investigation of steel-MIC interactions. With this it is possible to analyze the multi-elemental fingerprint of individual cells. The detection method revealed elemental selectivity for the corrosive methanogenic archaeal strain Methanobacterium-affiliated IM1. The interface between material and environmental analysis thus receives special attention, e.g., when considering MIC on solid steel. Hence, the possible uptake of individual elements from different steel samples is investigated. Results showed the cells responded at a single-cell level to the different types of supplemented elements and displayed the abilities to interact with chromium, vanadium, titanium, cobalt, and molybdenum from solid metal surfaces. The information obtained will be used in the future to elucidate underlying mechanisms and develop possible material protection concepts, thus combining modern methods of analytical sciences with materials research. T2 - ToFcon 2022 CY - Online meeting DA - 17.11.2022 KW - Single cell KW - Microbiological influenced corrosion MIC KW - Sc-ICP-ToF-MS KW - Method development KW - Ir DNA staining approach KW - Carbon steel corrosion PY - 2022 AN - OPUS4-56355 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - Materialanalysen an Bibliotheksgut. Möglichkeiten und Grenzen N2 - Eine neue Panik macht sich in Deutschland breit: sind alle Bücher, die einen grünen Farbschnitt oder Umschlag haben und damit giftiges Arsen enthalten, eine Gefahr für Mensch und Umwelt? Der Vortrag blickt aus archäometrischer Perspektive auf das Phänomen und stellt klar, dass seit der Antike gesundheitsschädliche Pigmente Verwendung fanden und dass seit dem späten Mittelalter schriftliche Belege für den sorgfältigen Umgang mit solchen Gefahrstoffen existieren. Die Farbe "grün" ist keineswegs die einzige Farbe, die "Gifte" enthalten kann. Zudem lässt sich die Palette der "gefährlichen" Elemente mit Blei, Quecksilber, Cadmium oder Chrom deutlich erweitern. T2 - Arsen in Büchern: Auf dem Weg zu angemessenen Arbeitsschutzmaßnahmen CY - Wolfenbüttel, Germany DA - 10.10.2024 KW - Archäometrie KW - Gift KW - Arbeitsschutz PY - 2024 AN - OPUS4-61407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Materials in contact with drinking water and regulatory issues N2 - The state of play in regard to regulations of materials in contact with drinking water in europe is discussed T2 - Kormat 2022 CY - Online meeting DA - 26.04.2022 KW - Korrosion KW - Trinkwasser KW - Hygiene KW - Risikobewertung PY - 2022 AN - OPUS4-54710 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Mechanisms and evolution of resistance to antimicrobial biocides N2 - Antimicrobial resistance (AMR) is a global health problem with the environment being an important compartment for the evolution, selection and transmission of AMR. These processes are impacted by pollution with antibiotics. However, antimicrobial biocides used as disinfectants and material preservatives are major pollutants exceeding the antibiotic market in terms of chemical diversity and mass. The aim of our work is to understand the mechanisms and risks of biocides for resistance and antibiotic cross-resistance evolution in bacteria to optimize their application and safeguard their efficacy. Our work shows that biocides have the potential to affect evolutionary processes towards AMR by increasing the rates of de-novo mutation and conjugation. Importantly, widely used compounds such as chlorhexidine and quaternary ammonium compounds (QACs) affect rates of mutation and conjugation at environmentally relevant concentrations. Furthermore, we show that single-cell phenotypic heterogeneity regarding tolerance (persistence) determines survival against specific biocides including QACs and isopropanol. Mechanistic investigations reveal that known antibiotic persister mechanisms contribute to persister formation to biocides. The evolution of high-level tolerance to different biocides is linked to the initial persister level and the evolution of specific genetically encoded mechanisms related to properties of the cell envelope. Biocide-tolerant strains have a selective advantage in the presence of environmentally-relevant concentrations of antibiotics, which could lead to the stabilization of biocide tolerance in environments where biocides and antibiotics co-occur (e.g. wastewater, animal stables). Taken together, our work shows the importance of assessing the contribution of biocides on evolution and selection of AMR in the environment. T2 - EMBO Symposium on Mechanisms of drug resistance and tolerance in bacteria, fungi, and cancer CY - Heidelberg, Germany DA - 18.03.2025 KW - Antimicrobial surfaces KW - Biocides KW - Antimicrobial resistance PY - 2025 AN - OPUS4-64866 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Miclea, Paul-Tiberiu T1 - Membrane filter cascade for size-selective analysis of nano-and micro particles N2 - From a metrological point of view, the analysis of micro and nanoplastics MNP requires not only representative and meaningful methods for sampling, preparation, and detection, but also defined and reproducible analytical procedures for the processes and materials used. For such a validation of the detection procedures (including the determination of process and laboratory blank values), the filters and laboratory conditions used in interaction with the final MNP measurement play a central role for detection limits regarding MNP size, MNP content and statistical measurement control, in addition to the reference materials mentioned above. On the basis of available filtration materials (e.g. metal mesh, silicon, aluminum oxide, polycarbonate) and metrological boundary conditions, key aspects for metrologically sound method development must be defined. Two key categories of analysis are developed for the characterization of MNP’s: analytical methods (e.g. µ-IR spectroscopy, µRaman) and mass spectrometry (eg. Py-GC/MS or TED-GC/MS). If in the first category the shape, size, number of particles and the size distribution present in the samples can be determined. In the second category the mass of the material can be measured and the volume of plastic present in the samples can be deduced from this. Both catagories are very sensitive in terms of the volume of material that can be analyzed; vibrational methods can detect single particles but mass-based method require enough particles to reach the limit of detection. That is why in this study we propose a filtration system, which in our opinion brings the two categories much closer to each other and allows true measurements of particle number and mass of the same sample. In this way it is possible not only to estimate the volume of plastic in the sample, but also to determine with much greater precision the number of particles and the type of plastic present. Furthermore, new methods for particle detection can be added and combined with existing methods. Our proposed system can be used for a single filter, but also for the use of several filters in cascade. In this way a separation of particles by size can be achieved. T2 - 13th Annual World Congress of Nano Science & Technology 2024 CY - Osaka, Japan DA - 22.05.2024 KW - Microplastics KW - Si filters KW - Filtration KW - Polymer 3R PY - 2024 AN - OPUS4-61097 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanaris, Orestis T1 - Metabolic niches and persistence of antibiotic resistant bacteria in the environment N2 - Background and Aim: Wastewater treatment plants are considered as hotspots for the development and spread of antimicrobial resistance. Antimicrobial resistant bacteria (ARB) can persist in the environment for long periods of time, despite metabolic fitness costs that can arise with resistance. We are interested in understanding the mechanisms, which allow ARB to persist in the environment. More specifically, we want to identify metabolic niches that can select for resistant bacteria. Procedure/Method: 62 E. coli strains isolated from different WWTPs in Norway were used. The isolates have different levels of resistance to 14 antibiotics. The susceptibility of the isolates to 3 disinfectants was determined. In addition, genome scale metabolic models (GEMs) were constructed and the growth of the strains was simulated in the presence of 198 different carbon sources. Furthermore, the growth rates of the isolates were measured in the presence of 3 carbon sources. Findings/Results: Many of the isolates have high resistance to multiple antibiotics but only few of the isolates have higher minimum inhibitory concentrations to the disinfectants, compared to an E. coli laboratory strain. With the GEMs, we identified 40 carbon sources that can be utilized for growth only by a portion of all the isolates. The prediction accuracy of the GEMs was 93% in the case of D-Malate. A group of 10 isolates was identified of which 5 isolates are resistant to ciprofloxacin, gentamicin and tetracycline and can grow on Sucrose but not on D-Malate and the other 5 isolates are susceptible to the same 3 antibiotics but can grow on D-Malate and not on Sucrose. Implications/Applications: Our data suggest that changing the available carbon source could shift the selection advantage between resistant and susceptible bacterial strains. If this strategy is confirmed experimentally, it could be applied to reduce the number of ARB in environments like wastewater. T2 - Conference on the Environmental dimentions of antimicrobial resistance 7 CY - Montreal, Canada DA - 26.05.2024 KW - Antimicrobial resistance KW - Wastewater PY - 2024 AN - OPUS4-61410 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kanaris, Orestis T1 - Metabolic niches and persistence of antibiotic resistant bacteria in the environment N2 - Background and Aim: Wastewater treatment plants are considered as hotspots for the development and spread of antimicrobial resistance. Antimicrobial resistant bacteria (ARB) can persist in the environment for long periods of time, despite metabolic fitness costs that can arise with resistance. We are interested in understanding the mechanisms, which allow ARB to persist in the environment. More specifically, we want to identify metabolic niches that can select for resistant bacteria. Procedure/Method: 62 E. coli strains isolated from different WWTPs in Norway were used. The isolates have different levels of resistance to 14 antibiotics. The susceptibility of the isolates to 3 disinfectants was determined. In addition, genome scale metabolic models (GEMs) were constructed and the growth of the strains was simulated in the presence of 198 different carbon sources. Furthermore, the growth rates of the isolates were measured in the presence of 3 carbon sources. Findings/Results: Many of the isolates have high resistance to multiple antibiotics but only few of the isolates have higher minimum inhibitory concentrations to the disinfectants, compared to an E. coli laboratory strain. With the GEMs, we identified 40 carbon sources that can be utilized for growth only by a portion of all the isolates. The prediction accuracy of the GEMs was 93% in the case of D-Malate. A group of 10 isolates was identified of which 5 isolates are resistant to ciprofloxacin, gentamicin and tetracycline and can grow on Sucrose but not on D-Malate and the other 5 isolates are susceptible to the same 3 antibiotics but can grow on D-Malate and not on Sucrose. Implications/Applications: Our data suggest that changing the available carbon source could shift the selection advantage between resistant and susceptible bacterial strains. If this strategy is confirmed experimentally, it could be applied to reduce the number of ARB in environments such as wastewater. T2 - International Biodeterioration and Biodegradation Symposium 19 CY - Berlin, Germany DA - 09.09.2024 KW - Antimicrobial resistance KW - Wastewater PY - 2024 AN - OPUS4-61412 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Metall - Migration in der Trinkwasserinstallation N2 - Der grundsätzliche Mechanismus der Metallmigration wird erläutert, die gesetzlichen Regeln erläutert. Die Veränderungen, die sich aus der neuen EU-Trinkwasserrichtlinie für den Werkstoffeinsatz ergeben, werden erläutert. Beispiele für die Vorgehensweise werden gezeigt, ein Ausblick für die Umsetzung bildet den Abschluss. T2 - 24. Sanitärtechnisches Symposium CY - Ahaus, Germany DA - 04.04.2025 KW - Korrosion KW - Metallmigration KW - Trinkwasser PY - 2025 AN - OPUS4-62900 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bäßler, Ralph T1 - Metallene Werkstoffe in Geothermieanlagen - nicht nur aus Sicht der Korrosion N2 - Um Konstrukteuren und Nutzern geothermischer Anlagen grundlegende Informationen über die Korrosionsbeständigkeit zur Verfügung zu stellen, wurden verschiedene metallene Werkstoffe, darunter nichtrostende Duplex- und austenitische Stähle sowie eine Nickellegierung, in künstlichen Geothermalwässern, die die Bedingungen an verschiedenen Standorten mit geothermischem Potenzial simulieren, mit Hilfe von elektrochemischen und Langzeittests hinsichtlich ihrer Eignung bewertet. In hochsalinaren Umgebungen erwies sich Spaltkorrosion als der entscheidende Mechanismus. Die Nickellegierung zeigt eine ausgezeichnete Beständigkeit gegenüber Lochkorrosion. Abgesehen von ihren hohen Kosten eignet sie sich sehr gut für den Bau von Geothermieanlagen mit stark salzhaltigen Fluiden. Rostfreie Stähle und Duplexstähle weisen eine begrenzte Korrosionsbeständigkeit gegen Loch- und Spaltkorrosion auf. Daher sind sie für stark salzhaltige Fluide nicht geeignet. Der Superaustenit zeigt ein temperaturabhängiges Verhalten. In nichtsalinaren Umgebungen könnten niedriglegierte Stähle (neben den höherlegierten Werkstoffen) als Konstruktionsmaterial für Geothermieanlagen eingesetzt werden, sofern eine ausreichende Wandstärke des Materials berücksichtigt wird. Neben Korrosionsaspekten erwies sich auch die Ausfällung von Fluidbestandteilen als interessantes Thema. Beim Betrieb der Forschungsanlage in Groß Schönebeck wurden Kupfer- und Bleieffekte im Bohrloch festgestellt. Die auftretenden Mechanismen und Maßnahmen zur Verhinderung von Ausfällungen und Abscheidungen wurden ebenso untersucht, wie deren mögliche Einflüsse auf die Korrosionsbeständigkeit metallener Werkstoffe für Anlagenkomponenten. Der Beitrag beschreibt die Wechselwirkungen zwischen Geothermalwässern und Ausrüstungskomponenten. T2 - 57. Kraftwerktechnisches Kolloquium CY - Dresden, Germany DA - 07.10.2025 KW - Örtliche Korrosion KW - Edelstahl KW - Ni-Legierungen KW - Geothermie KW - Abscheidung PY - 2025 AN - OPUS4-64323 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Visileanu, E. T1 - Methods for the collection and characterization of airborne particles in the textile industry N2 - The presentation summarizes possibilities to sample airborne micro and nanoplastic particles. An example of a textil company is shown. T2 - 5th International Conference on Human Systems Engineering and Design: Future Trends and Applications (IHSED 2023 CY - Dubrovnik, Croatia DA - 27.09.2023 KW - Microplastics KW - Polymer 3R KW - Textile company PY - 2023 AN - OPUS4-58561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hodoroaba, Vasile-Dan T1 - Micro and Nano Plastics in the Environment N2 - The VAMAS/TWA 45 Project 2 “Development of standardized methodologies for characterisation of microplastics with microscopy and spectroscopy methods” involving 85 participants around the world is primarily discussed with respect to the results received and a first data evaluation. Status of the Project "Guidelines for defining reference materials for plastic degradation in marine environment" is reported and two new project proposals are presented: "Development of standardized methodologies for characterisation of nanoplastics (starting soon, BAM as leader?) and "Development of analytical protocols for the identification and quantification of microplastics of fibrous shape (still in negotiation)". T2 - Versailles Project on Advanced Materials and Standards (VAMAS) 48th Steering Committee Meeting CY - New Delhi, India DA - 09.10.2023 KW - Microplastics KW - Nanoplastics KW - Interlaboratory comparison KW - VAMAS KW - Reference materials KW - ISO PY - 2023 UR - https://www.nplindia.org/index.php/amcsnzt_2023/ AN - OPUS4-58539 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Miclea, Paul T1 - Microanalysis of Airborne Nano/Microplastic Particles in an Textile Industrial Environment N2 - Micro- and nanoplastics (MNPs) are emerging global contaminants, present in air, soil, and water. The textile industry is potentially a major contributor, releasing synthetic particles like polyamide, polyester, and acrylic during production. This study assessed MNP levels outside and inside a textile-processing facility using online air samplers with silicon (Si) and quartz filters. Real-time particle counts (PM0.3–PM10) were obtained via a laser detector. Si filters (9 mm, 10/1 µm pores) and quartz filters (25 mm, 1.2 µm pores, pre-calcined at 800°C) were used for sampling. Custom holders allowed selective sampling for PM10 and PM1 on Si filters. Sampling conditions included a 3-hour collection at 2 L/min (GilAir Plus pump) starting at 7:00 AM (T1) and 2:00 PM (T2), with intermittent ventilation, 23.3 °C average temperature, and 52.5% humidity. Particle weights collected (µg) were: quartz – 4.9E-05 (T1), 5.1E-05 (T2); Si – 3.2E-05 (T1), 5E-06 (T2). Outside particle counts ranged from 3,584 (T1) to 15,165 (T2); inside: 9,901 (T1) to 12,921 (T2). Maximum indoor PM10 and PM0.3 levels were 72/m³ and 71,979/m³, respectively. Particles were analyzed using electron microscopy and µRaman spectroscopy, confirming high concentrations of irregularly shaped PP-based particles (1–5 µm). T2 - 12th TEXTEH CY - Bucharest, Romania DA - 23.10.2025 KW - Microplastics KW - Airborne particles KW - Raman microspectroscopy PY - 2025 AN - OPUS4-64485 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gluth, Gregor T1 - Microbially induced corrosion of cementitious materials in sewer systems N2 - Sewer networks (also called wastewater systems) include structures to collect and transport wastewater to disposal or treatment in dedicated facilities. These networks are essential infrastructures of our societies, and the size of these systems in terms of length as well as asset value is usually vast. Accordingly, the annual rehabilitation and replacement costs for sewer networks are very high in many countries. In addition, failures of wastewater systems can cause severe health and environmental problems, making the durability of these infrastructures an issue of crucial societal importance. A substantial fraction of the deterioration of sewers is caused by microbially influenced corrosion (MIC) of concrete structures in the networks, and, thus, understanding the causes of this process is crucial to be able to effectively direct resources for rehabilitation, replacement and construction of sewer systems. Because of the importance of the problem, it has been studied for many decades, and significant progress has been made during this time. In recent years, answers to several previously underexplored questions, for example regarding the validity of the different test methods to assess the resistance of cementitious materials against MIC and the suitability of new cementitious materials for sewer repair, have begun to emerge. The present contribution gives an overview over the processes involved in MIC of cementitious materials in sewers, and reviews recent findings concerning the resistance of cementitious materials against MIC. The data indicate that alkali-activated materials can exhibit exceptionally high resistance against MIC, while it is presently not fully understood which mix design parameters deter¬mine this resistance. Disagreement exists in the literature regarding the causes of the generally high resistance of calcium aluminate cements. Significant progress has been made in determining the deterioration rate of cementitious materials under strongly corroding conditions, but well-founded approaches to classify the severity of MIC attack in sewers seem not to be available at present. T2 - MICxUS 2025 – Symposium on Microbiologically Influenced Corrosion (MIC) in Industrial and Utility Systems CY - Nicosia, Cyprus DA - 21.01.2025 KW - MIC KW - Cement KW - Repair mortar KW - Sulfuric acid KW - Sewers PY - 2025 AN - OPUS4-62738 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kirsch, Klemens T1 - Microbiologically Influenced Corrosion of Cast Iron Containers for High-Level Nuclear Waste Disposal N2 - Ductile and corrosion resistant cast iron is investigated as a potential container material to store high-level nuclear waste (HLW) in deep geological repositories (DGR) in claystone bedrock. The dynamic corrosion process is dependent on the conditions present in the DGR which are influenced and/or controlled by geochemical parameters (e.g., redox potential, pH, presence of and ionic concentration in (pore-)water), physical parameters (e.g., pressure), and the influence of metabolically active microorganisms. Cast iron corrosion will occur at the intersection of container and its decontaminable coating with the bentonite backfill material which contains natural microbial populations. The conditions in a DGR are simulated in microcosm experiments to investigate the impact of microbiologically influenced corrosion (MIC); the microcosms contain: B27 bentonite, synthetic pore water, N2 or N2-CO2 atmosphere, cast iron coupons, as well as the bacterium Desulfosporosinus burensis (isolated from repository depth in Buré, France). Three coupon configurations will be used: untreated, coated with decontaminable coating, and coated with decontaminable coating which has been damaged to simulate possible damages. The microcosms will be examined for bio- and geochemical parameters, such as pH, redox potential, mineral phases, sulphate concentration, Fe(II):Fe(III), changes in microbial populations, and the corrosion process for formation of corrosion products, and potential microbial influence, after a 270-day incubation period at 25°C under anaerobic conditions. In subsequent experiments, the sorption behavior of lanthanides and actinides onto the membranes of viable cells and spores of D. burensis, as well as the surface of corroded cast iron coupons will be investigated. T2 - 8th International Workshop on Long-term Prediction of Corrosion in Nuclear Waste Systems 2022 CY - Baden, Switzerland DA - 21.06.2022 KW - Microbiologically influenced corrosion (MIC) KW - Cast iron KW - Nuclear waste disposal PY - 2022 AN - OPUS4-55154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Oberbeckmann, Sonja T1 - Microplastic-microbiome interactions in aquatic ecosystems: a complex story N2 - As pervasive and persistent pollutants, microplastics exist alongside diverse microbial communities in nature. These hardy substrates accumulate rich polymeric matrices from their surroundings that in turn offer nutrition and protection to diverse communities and their theatre of activity, representing a new ecological niche. With our work, we aim to establish a holistic understanding of the interactions between microplastics and microorganisms within aquatic systems, and how these interactions shape their surrounding environment. In our research, we combine field sampling with in situ experiments, and apply high-throughput sequencing technologies to 16S genes and whole bacterial genomes. We demonstrate through our studies that biofilm communities exhibit no specificity to plastic polymer type but appear rather to be opportunistic colonizers more strongly shaped by spatial and temporal factors. While the polymer surface does not appear to elicit a selective effect on associated biofilms, our studies show that microplastics might shape communities in a different way. Based on our detection of carotenoid synthesis pathways and photosynthetic gene clusters among plastic biofilms, we postulate this new niche to shape a specific functional toolkit, adaptive among its members as a product of prolonged exposure to UV radiation at the sea’s surface. To fully assess the interactions between microplastics and microorganisms, however, one cannot consider plastics singularly but as a component within a more complex and interconnected system. It is known, for instance, that plastics can sorb significant concentrations of polycyclic aromatic hydrocarbons (PAH) in the environment. We show, in our work, that the PAH sorption patterns of microplastics correlate significantly with the structure of associated biofilm communities. Elevated concentrations of specific PAHs on microplastics coincided with the enrichment of selected taxa reportedly capable of hydrocarbon utilisation as well as a reduced diversity among associated biofilm communities. Here, we present a synthesis of our collective research on microplastic biofilms in the aquatic environment, the factors that shape them, and their interactions with nature. To fully comprehend how microplastics impact ecosystems, the entire substrate must be considered, including all chemicals integrated into the polymeric matrix as well as associated biofilms. T2 - SETAC Europe 35th Annual Meeting CY - Vienna, Austria DA - 11.05.2025 KW - Microplastics KW - Biofilms KW - PAH PY - 2025 AN - OPUS4-63154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Microplastics at BAM: TED-GC/MS and reference materials N2 - Thsi talk aims to present the activities of microplastic analysis at BAM according to TED-GC/MS and reference materials developement. T2 - Webinar BAM / University of Birmingham CY - Online meeting DA - 15.06.2021 KW - Microplastic KW - TED-GC/MS KW - Reference materials PY - 2021 AN - OPUS4-53738 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koerdt, Andrea T1 - Mikrobiell beeinflusste Korrosion (MIC) – Wenn MIC dann BAM N2 - In dieser Präsentation wurden dem Beirat Umwelt die High-Lights und der weitere Ausblick des Foresight Process MIC vorgestellt. Im Fokus stehen hierbei insbesondere die neu angelaufenen Projekte: COST Action Euro-MIC MIC im Endlager Hydrogen: MIC & Wasserstoffversprödung Biorezeptivität von Betonoberflächen Mitigation schwarze Pilze WIPANO ResTest T2 - Beirat Umwelt CY - Online meeting DA - 11.03.2022 KW - MIC KW - Hi-Tension KW - Projekte PY - 2022 AN - OPUS4-54463 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koerdt, Andrea T1 - Mikrobielle Zusammensetzung im Wassertank N2 - Der Fachbereich 7.6 untersucht seit einiger Zeit an Auslagerungsständen auf dem Testgelände in Horstwalde Korrosion im maritimen Bereich. Im Moment läuft das System mit künstlichem Meerwasser und simuliert die Bewitterung von Metallproben unter angenäherten klimatischen Bedingungen ähnlich zum natürlichem Habitat. Im Laufe der Zeit konnte nicht intendierter mikrobieller bewuchs beobachtet werden. Es stellte sich die Frage, welche Mikroorganismen vorlagen und ob diese einen Einfluss auf die Korrosionsuntersuchungen haben könnte. Aus diesem Grund wurden 16S-rRNA Untersuchungen durchgeführt welche alle drei Domänen des Lebens widerspiegeln Bakterien, Archaea und Eukaryoten. Es konnte gezeigt werden, dass über 95% der vorliegenden Biomasse Grünalgen waren, die durch Licht Eintrag in den Container Photosynthese betrieben und dadurch an Biomasse zunahmen. Des weiteren konnten Bakterien detektiert werden, welche in der Regel halophilen und aeroben Habitaten zu finden sind. Allerdings wurden auch Sulfat reduzierende Bakterien (MIC) detektiert, wenn auch in einem geringen prozentualen Anteil. Es muss allerdings Berücksichtigt werden, dass die mikrobielle Zusammensetzung sich im Laufe der Zeit weiter ändern kann. Als Ursprung der Biomasse wird, das künstliche Sediment vermutet. Außerdem wäre es für zukünftige Experiment denkbar, das System mit echtem Sediment aus dem marinen Habitat anzuimpfen. T2 - Dechema CY - Online meeting DA - 10.11.2021 KW - Mikroorganismen KW - Mikrobielle Gemeinschaft KW - Korrosion KW - Simulation PY - 2021 AN - OPUS4-54035 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik an der BAM: TED-GC/MS und Referenzmaterialien N2 - Thema ist die Funktionsweise der TED-GC/MS als Methode für die Mikroplastik-Detektion sowie die Herstellung dazugehöriger Referenzmaterialien an der BAM T2 - 25. Kolloquium Massenspektrometrie von Polymeren CY - Online meeting DA - 17.06.2021 KW - Mikroplastik KW - TED-GC/MS KW - Referenzmaterial PY - 2021 AN - OPUS4-52835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik Detektion mit Thermoanalytischen Methoden: Analytik, Referenzmaterial, Ringversuche N2 - Ich dem Vortrag geht es um die Vorstellung von thermoanalytischen Methoden für die Mikroplastik-Detektion. Verschiedene Kopplungsmöglichkeiten werden gezeigt und die Funktionsweise der TED-GC/MS wird erklärt. Im zweiten Teil werden Referenzmaterialien für die Mikroplastik-Analytik diskutiert. PET -Tabletten des PlasticTrace Projektes werden vorgestellt. Am Ende wird der VAMAS Ringversuch zur Mikroplastik-Detektion gezeigt. T2 - Plastik, Mikroplastik, Nanopartikel, PFAS und Verunreinigungen (Agilent Workshop) CY - Hamburg, Germany DA - 28.05.2024 KW - Mikroplastik KW - TED-GC/MS KW - Polymer 3R KW - Ringversuche KW - Referenzmaterial PY - 2024 AN - OPUS4-60155 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik heute: Was haben wir in den letzten Jahren erreicht? N2 - In diesem Vortrag geht es um eine Übersicht über die Thematik der Mikroplastik, Was ist Mikroplastik, wie entsteht es und wo kommt es her. Es wird beschrieben wie eine repräsentative Probenahme erfolgen kann und wie welche Herausforderungen bei der Probenvorbereitung existieren. Die Detektion wird ausführlich beschrieben, sowohl mit Partikelanzahl als auch Masse. Im weiteren werden erste Referenzmaterialien und ihre Anwendung in internationalen Ringversuchen beschrieben. Der zweite Teil zeigt die Normungsaktivitäten im Bereich der Mikroplastik. T2 - Mitgliederversammlung der GdCh Lackchemie CY - Online Meeting DA - 20.09.2024 KW - Mikroplastik KW - TED-GC/MS KW - Polymer 3R KW - Reference material KW - ILC on detection methods PY - 2024 AN - OPUS4-61087 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik Referenzmaterial und erste Vergleichsuntersuchungen N2 - Hierbei geht es um die Vorstellung von ersten Möglichkeiten um Referenzmaterial für die Mikroplastik-Analytik herzustellen und die Ergebnisse erster Vergleichsversuche. T2 - EUROLAB-D Workshop: Mikroplastik in der Praxis CY - Online meeting DA - 30.11.2021 KW - Mikroplastik KW - Referenzmaterial KW - Vergleichsversuche PY - 2021 AN - OPUS4-53880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik – Ein Problem für die Menschheit? N2 - Mikroplastik findet sich in Ozeanen, Seen, Flüssen und Bächen. Es kann in unserem Boden, in der Luft und sogar in Organismen nachgewiesen werden. Jedes Jahr werden weltweit Millionen Tonnen freigesetzt. Doch wo und wie landet Mikroplastik in der Umwelt? Und wie können wir diese winzigen Partikel nachweisen? T2 - Berlin Science Week CY - Berlin, Germany DA - 01.11.2021 KW - Mikroplastik KW - TED-GC/MS PY - 2021 AN - OPUS4-53734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiesner, Yosri T1 - MIKROPLASTIK – von der Probenvorbereitung bis zur Analytik N2 - Der Vortrag beschreibt die Herausforderungen bei der Analyse von Mikroplastik inklusive Probennahme, Probenvorbereitung und Detektion. Es werden Ergebnisse aus dem BMBF-Projekt RUSEKU vorgestellt. T2 - LABO-Anwendertag CY - Online meeting DA - 23.11.2021 KW - Mikroplastik KW - TED-GC/MS KW - Mikroplastik-Analytik PY - 2021 AN - OPUS4-53829 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dehkohneh, Abolfazl T1 - Modelling biofilm formation and material colonisation for Knufia petricola N2 - Rock-inhabiting black fungi are adapted to survive extreme stresses such as radiation and lack of water and are thus able to colonise arid material surfaces like solar panels and marble monuments. Black fungi can typically grow as one of two cell types: depending on the environmental conditions, they are able to form yeast-like cells or hyphal filaments. Knufia petricola is one member of the rock-inhabiting black fungi which functions as a model reference species. As there is no mathematical model for biofilm formation of RIF, we are going to develop a model for K. petricola which describes fungal growth on the level of individual cells adn biofilm formation. T2 - Mini conference at University of Birmingham CY - Birmingham, UK DA - 05.10.2022 KW - Knufia petricola KW - Rock-inhabiting black fungi KW - individual-based modelling PY - 2022 AN - OPUS4-56697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna A1 - Braun, U. T1 - Monitoring von Mikroplastik N2 - Der Vortrag gibt einen Überblick was bei der Analyse von Mikroplastik zu beachten ist und beschreibt die Vor- und Nachteile der TED-GC/MS. T2 - Abschlusstreffen MikroPlaTas CY - Online meeting DA - 23.06.2021 KW - Mikroplastik KW - TED-GC/MS KW - Mikroplastik-Analytik PY - 2021 AN - OPUS4-52916 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hahn, Oliver T1 - More than 25 years of ink analysis non-destructive testing of black writing materials N2 - Writing inks can be divided into soluble inks and dispersion inks. Soluble inks are based on plant or insect dyes forming a water solution. In the early European Middle Ages brown plant inks were usually produced from the blackthorn bark and wine. In contrast to these soluble brown inks, one of the oldest black writing materials was produced by mixing soot with gum arabic or animal glue dissolved in a small amount of water. From Pliny’s detailed account of the manufacture of various black carbon inks, we learn that producing pure soot of high quality was not an easy task in Antiquity. Iron gall inks are a borderline case between these two groups. They are produced from four basic ingredients: gallic acid, an iron-containing component, gum arabic as a binding media, and an aqueous medium such as wine, beer, or vinegar. By mixing gallic acid with soluble iron ions, a water-soluble ferrous gallate complex is formed. Exposure to oxygen leads to the formation of insoluble black ferric gallate pigment. Due to the variety of recipes and the natural origin of raw materials, there is a wide range of different components and impurities in writing inks. The Bundesanstalt für Materialforschung und -prüfung (BAM) together with the Centre for the Study of Manuscript Cultures in Hamburg (CSMC) has developed a protocol for ink analysis. It consists of a primary screening to determine the type of the ink and a subsequent in-depth analysis using several spectroscopic techniques (X-ray fluorescence analysis and vibrational spectroscopy). This contribution presents a qualitative and quantitative analysis of historical writing inks to characterize distinguishable inks in manuscripts, to determine the origin of manuscripts, and to assign unknown fragments to time and place. T2 - Beyond the reconstruction of an Urtext: “About the history of the early Qurʾānic text with regard to digital research tools” CY - Hesse, Germany DA - 07.07.2025 KW - Archaeometry KW - Non-destructive testing KW - Material analysis KW - Cultural heritage PY - 2025 AN - OPUS4-63906 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Drexel, R. T1 - Nano-sized Polypropylene as a Promising Candidate Reference Material: Preparation, Characterization and Stability in Complex Matrices N2 - The lack of nanoplastic (NPs) reference materials capable of mimicking real-world scenarios is currently hampering the development of validated extraction techniques from complex matrices (e.g. soils, sediments, biota), the development of analytical approaches for robust identification and quantification, and the ability to use environmentally relevant test materials in (eco)toxicity testing and hazard assessment [1]. The large body of available data suggests that larger microplastics (MPs) in the natural environment are irregular shaped, partially degraded (chemically and physically), a continuum of sizes, shapes and densities, represent a wide range of polymer types, and acts as a reservoir for thousands of plastic chemicals. Although NPs have been described as being neither MPs nor engineered nanoparticles [2], and while direct measurement data of true NP in the environment remain elusive, they are expected to be as equally diverse as MPs [3]. Here, we present a strategy towards the development of a potential NP reference material based on nano-sized polyproplyene particles (nanoPP) developed within the EURAMET-funded PlasticTrace project (https://plastictrace.eu/). The strategy includes the preparation, the physicochemical characterization and the stability assessment of nanoPP in suspension both in its pristine state, but also when spiked into food (mineral water and milk) and environmental matrices (suspended particulate matter collected from the river Elbe ). Collected experimental data suggests nanoPP to be a promising candidate for a NP reference material. T2 - SETAC Europe 2025 CY - Vienna, Austria DA - 11.05.2025 KW - Nanoplastics KW - Reference materials PY - 2025 AN - OPUS4-63382 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Needs, concepts and state of the art: Top-down production of reference materials for micro- and nanoplastics and their use in harmonisation processes N2 - The talk explains the top-down production of materials suitable for mircoplastics and nanoplastics and the use in ILCs. T2 - EUROLAB webinar: MICROPLASTICS: regulations, standards and the role of laboratories CY - Online meeting DA - 15.02.2023 KW - Microplastics KW - Nanoplastics KW - ILC KW - Milling PY - 2023 AN - OPUS4-57008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Neubewertung von metallenen Dach- und Fassadenmaterialien unter Dauerhaftigkeits- und Umweltaspekten N2 - Die Feldstudien haben gezeigt, dass die Dauer und Menge der Regenereignisse die Run-Off-Rate beeinflusst. Zwischen den Auslagerungsstandorten sind die Unterschiede gering. Bei Zink werden im ersten Jahr ca. 80 % der in Lösung gehenden Metallionen über den Run-OFF abgeschwemmt. Dagegen sind es bei Kupfer nur etwa 10 %. Grund ist die unterschiedliche Wasserlöslichkeit der gebildeten Korrosionsprodukte. Die Laborstudien haben gezeigt, dass der Einfluss von Regendauer und Regenmenge erwartungsgemäß hoch ist. Die Kombination aus geringer Dachneigung und einem pH-Wert von 4,5 führt zu den höchsten Run-Off-Raten für Zink und auch Kupfer. Zinkhydroxid-Korrosionsprodukte erhöhen die Run-Off-Rate, bis sich wasserunlösliche Zinkkarbonatschichten bilden. T2 - Sitzung DIN NA 062-01-71 AA Korrosion und Korrosionsschutz CY - Berlin, Germany DA - 16.10.2024 KW - Korrosion KW - Regensimulator KW - Runoff KW - Deckschichtbildung KW - Metalleintrag in die Umwelt PY - 2024 AN - OPUS4-61381 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas T1 - Neubewertung von metallenen Dach- und Fassadenmaterialien unter Dauerhaftigkeits- und Umweltaspekten N2 - Metallene Dach- und Fassadenmaterialien unterliegen nach ihrer Installation infolge von Korrosions- und Abschwemmprozessen einem Abtrag von Metallionen. Durch Regenereignisse gelangen diese in umliegende Gewässer und Böden. Die verwendeten metallenen Werkstoffe, wie z.B. Kupfer und Zink bilden zeitabhängig schützende Deckschichten aus, die die Dauerhaftigkeit der Werkstoffe gewährleisten und damit den Austrag von Metallionen signifikant begrenzen. Die Geschwindigkeit der Deckschichtbildung sowie die erreichte Schutzwirkung sind von verschiedenen Umwelteinflüssen und klimatischen Bedingungen abhängig. Diese haben sich in den letzten Jahrzehnten in Europa stark verändert, so dass es einer aktuellen Datenbasis für die Bewertung der Dauerhaftigkeit und der Umweltauswirkungen bedarf. Im Rahmen eines Forschungsvorhabens werden aktuell Feldstudien zur Ermittlung des Runoffs und der Schutzwirkung der gebildeten Deckschichten durchgeführt. Ergänzt werden diese durch Laborversuche mit künstlicher Beregnung. T2 - 76. Sitzung DIN Arbeitsausschuss Korrosion und Korrosionsschutz CY - Berlin, Germany DA - 17.10.2023 KW - Atmosphärische Korrosion KW - Runoff KW - Deckschichtbildung KW - Schutzwirkung KW - Umgebungseinflüsse PY - 2023 AN - OPUS4-58706 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Haacke, Nasrin T1 - Neubewertung von metallischen Dach- und Fassadenmaterialien unter Dauerhaftigkeits- und Umweltaspekten N2 - Der Vortrag stellt den aktuellen Stand des Forschungsprojekts RUNOFF vor. Dabei liegt der Fokus auf die Neubewertung der Dauerhaftigkeit von Zink und feuerverzinktem Stahl. Unter bewitterten Bedingungen erreichen beide Materialien stabile, karbonathaltige Deckschichten bereits nach einer Auslagerungszeit von zwei Monaten. In den parallel zu den Feldversuchen laufende Laborversuche werden aktuell der Einfluss dreier Faktoren (Ph-Wert, Winkel des Probenmaterials, Niederschlagsintensität) auf das Abschwemmverhalten von Zinkionen mithilfe eines an der BAM konstruierten Niederschlagsimulators untersucht. T2 - GAV Forschungskolloquium 2023 CY - Hannover, Germany DA - 16.10.2023 KW - Runoff KW - Dauerhaftigkeit KW - Zink KW - Feuerverzinkt PY - 2023 AN - OPUS4-58625 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Neue Erkenntnisse zum Korrosionsverhalten von Zink an der Atmosphäre N2 - Die Untersuchungen und Ausführungen im Vortrag belegen, dass verfügbare Modellvorstellungen zur Beschreibung der Deckschichtbildung und Korrosion von Zink unter aktuellen atmosphärischen Bedingungen in Europa nicht mehr gültig sind und neu bewertet werden müssen. So können beispielsweise bisher verfügbare Prognosemodelle den Korrosionsfortschritt nicht mehr ausreichend beschreiben, da durch die Verringerung des Schwefeldioxidgehaltes der Luft veränderte Mechanismen vorliegen. T2 - 69. Sitzung des NA 062-01-71 AA "Korrosion und Korrosionsschutz" CY - Berlin, Germany DA - 27.02.2020 KW - Korrosion KW - Zink KW - Atmosphärische Korrosion KW - Korrosionsprüfung KW - Deckschichtbildung KW - gelartige Elektrolyte PY - 2020 AN - OPUS4-50479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Neue Erkenntnisse zur Deckschichtbildung von Zink an der Atmosphäre N2 - Die Untersuchungen und Ausführungen im Vortrag belegen, dass verfügbare Modellvorstellungen zur Beschreibung der Deckschichtbildung und Korrosion von Zink unter aktuellen atmosphärischen Bedingungen in Europa nicht mehr gültig sind und neu bewertet werden müssen. So können beispielsweise bisher verfügbare Prognosemodelle den Korrosionsfortschritt nicht mehr ausreichend beschreiben, da durch die Verringerung des Schwefeldioxidgehaltes der Luft veränderte Mechanismen vorliegen. T2 - Sitzung des Forschungsbeirats des Gemeinschaftsausschuss Verzinken e.V. CY - Online Meeting DA - 07.10.2021 KW - Atmosphärische Korrosion KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Zink PY - 2021 AN - OPUS4-53478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Neue Erkenntnisse zur Deckschichtbildung von Zink an der Atmosphäre N2 - Die Untersuchungen und Ausführungen im Vortrag belegen, dass verfügbare Modellvorstellungen zur Beschreibung der Deckschichtbildung und Korrosion von Zink unter aktuellen atmosphärischen Bedingungen in Europa nicht mehr gültig sind und neu bewertet werden müssen. So können beispielsweise bisher verfügbare Prognosemodelle den Korrosionsfortschritt nicht mehr ausreichend beschreiben, da durch die Verringerung des Schwefeldioxidgehaltes der Luft veränderte Mechanismen vorliegen. T2 - Sitzung des GfKORR Arbeitskreises „Korrosion und Korrosionsschutz von Eisen und Stahl“ CY - Online meeting DA - 22.06.2021 KW - Atmosphärische Korrosion KW - Gelartige Elektrolyte KW - Deckschichtbildung KW - Zink PY - 2021 AN - OPUS4-52843 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Neue Erkenntnisse zur Deckschichtbildung von Zink an der Atmosphäre N2 - Die Untersuchungen und Ausführungen im Vortrag belegen, dass verfügbare Modellvorstellungen zur Beschreibung der Deckschichtbildung und Korrosion von Zink unter aktuellen atmosphärischen Bedingungen in Europa nicht mehr gültig sind und neu bewertet werden müssen. So können beispielsweise bisher verfügbare Prognosemodelle den Korrosionsfortschritt nicht mehr ausreichend beschreiben, da durch die Verringerung des Schwefeldioxidgehaltes der Luft veränderte Mechanismen vorliegen. T2 - Sitzung des GfKORR Arbeitskreises „Zink und Zinküberzügel“ CY - Online meeting DA - 28.09.2021 KW - Atmosphärische Korrosion KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Zink PY - 2021 AN - OPUS4-53410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schünemann, Pia A1 - Junge, Florian T1 - New adsorbent materials for PFAS N2 - PFAS are a growing area of concern, and there is a need for the development of new adsorbent materials for a variety of applications, including sample preparation in environmental analysis and the remediation of water resources from PFAS contamination. In this presentation, we will discuss the next steps of the corporation and introduce some ideas for new adsorbent materials. T2 - Network Meeting SFB 1349 CY - Berlin, Germany DA - 07.11.2024 KW - PFAS KW - Adsorber KW - Environmental Analysis PY - 2024 AN - OPUS4-61762 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seneschal-Merz, Karine T1 - New UV-protective glazing for the conservation of cultural assets N2 - For centuries, churches, secular buildings and museums have been furnished with valuable works of art. Many works of art are UV- and light-sensitive. It is well known that especially UV radiation causes damage and discoloration in paintings, textiles, plastics, wood and other materials. In particular, the wavelengths between 280 and 410 nm cause color changes, embrittlement or destruction of e.g. plastics over time. Therefore, strongly UV-absorbing glasses are advantageous for architecture and are necessary for the protection of cultural assets. As restorers in all disciplines become more and more aware, the demands placed on buildings and their furnishings in terms of climate are becoming increasingly detailed and precise. The aim in each case is to preserve the valuable artwork. For some years now, the industry has been offering the protection of cultural objects by installing special UV-protective glasses. Currently, UV protection for church buildings is realized by laminated safety glass equipped with appropriate UV-protective plastic films. Technically, this always means a second pane of glass in front of the windows, which is installed outside the building. This creates climatic gaps that are difficult to control and deterioration due to ageing effects can be expected. At the same time, this protective glazing is not invisible and has a considerable aesthetic influence on the interior and exterior appearance of the building. Meanwhile, the preservation of historical monuments accepts such aesthetic cuts on buildings in order to protect the artwork in the interior from UV light. To this day, however, the long-term durability of UV protection provided by inserted plastic films is still controversial. To date the only available alternative on the market is a mouth-blown UV protection glass which uses a so-called overlay to provide UV protection. This shows that UV protection can also be achieved by glasses without plastic films thus realizing an exclusive inorganic protection which normally is more stable than a polymeric one. So far there are not enough studies to prove long-term durability. The aim of this project is to provide existing glazing or new glazing to be created with a highly transparent layer that ensures this UV-protective filter function below 400 nm. The glass coating is to be applied to the glass over a large area and fired into the surface like a classic ceramic enamel paint with the same technics. In addition, it should be long-term durable in its function. It means, that the glass has to be fused at temperatures below 630 °C during the firing process, its chemical durability has to be high, its coefficient of thermal expansion has to be as close as the one of the substrate (usually float glass) and the glass has to absorb the UV-radiation within a thin thickness (thinner as 100 µm). In this project, the long-term durability of commercial UV-protective glasses is examined. New low melting glasses containing UV-absorbing ions are being developed. Their UV-absorption as a thin layer is analyzed as well as their chemical durability and their thermal properties. We are grateful to BMWI for the financial support in the frame of the Central Innovation Programme for SMEs (ZIM). T2 - HVG-DGG: 94. Glastechnische Tagung CY - Online meeting DA - 10.05.2021 KW - Glass KW - Low melting KW - Chemical durability KW - Weathering tests KW - Aging test KW - UV absorption KW - UV protection KW - Architecture KW - Optical properties PY - 2021 AN - OPUS4-52648 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Normative Kernbedarfe einer Circular Economy N2 - Vorstellung von Schlüsselgremien und Aktivitäten bzgl. der Schaffung einer normativen und untergesetzlichen Basis zur Etablierung einer Circular Economy. T2 - Fraunhofer IZM AK Rechtskonformes Umweltmanagement CY - Berlin, Germany DA - 28.02.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Produkteffizienz KW - Materialeffizienz KW - Europäische Kommission PY - 2023 AN - OPUS4-57054 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heise, Svenja T1 - Normentwurf für ein Prüfverfahren zur Bestimmung von Deckschichtwiderständen an Zinküberzügen mittels gelartiger Elektrolyte (WIPANO - GELELEK) N2 - Der Vortrag stellt eine Ergebniszusammenfassung des WIPANO-Vorhabens GELELEK im Hinblick auf eine Normung dar. Dafür wird das Projekt zunächst kurz vorgestellt, um anschließend auf normungsrelevante Parameter einzugehen. Dazu gehören insbesondere die Umgebungs- und Messbedingungen, die Herstellungsparameter der Gelpads, das Messverfahren selbst sowie die messbaren Proben. Ein erster Ausblick auf den Normvorschlag wird gegeben. T2 - 14. Sitzung des NA 062-01-77 AA „Korrosionsprüfverfahren“ CY - Berlin, Germany DA - 26.02.2020 KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Korrosion KW - Korrosionsprüfung KW - Zinküberzüge KW - Atmosphärische Korrosion PY - 2020 AN - OPUS4-50536 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Normungsaktivitäten zur Umsetzung einer Circular Economy und die Schnittmenge zur Politik N2 - Der Vortrag fasst die Schnittmenge zwischen Normung und Politik bezüglich einer zirkulären Wirtschaft (Circular Economy) zusammen. Es wird an konkreten Schlüsselgremien und praktischen Beispielen gezeigt, wie Circular Economy bereits heute durch Normung gelingen kann und welche Zuarbeit durch die Politik von den Normungsgremien erbeten wird. T2 - TASIMA 2023 CY - Magdeburg, Germany DA - 11.09.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Normung KW - Zirkuläre Wirtschaft PY - 2023 AN - OPUS4-58407 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Normungsroadmap Circular Economy - Highlights N2 - Eines haben die Krisen dieses Jahrzehnts gemeinsam: Sie motivieren zum Handeln. Bezüglich der Klimakrise wird eine grundlegende Änderung unseres Wirtschaftens als wesentlicher Lösungsweg gesehen. Die aktuell praktizierte lineare Wertschöpfung führte zu Ressourcenknappheit und -abhängigkeit und trug aktiv zur Verstärkung des Klimawandels bei. Wie wir in diesem Jahrzehnt unseren Absprung von gewohnten Produktions-, Konsum- und Verwertungsmustern gestalten, wird entscheidend für die nächsten Jahrzehnte sein. Die Frage, wie bis 2030 die Transformation hin zu einer zirkulären Wirtschaft gelingen kann, wurde u.a. von der Circular Economy Initiative Deutschland beantwortet. Sie nennt zehn Handlungsschwerpunkte, wobei „Standardisierung“ mit an wichtigster Stelle steht. Dieses beruht auf Gegenseitigkeit. Auf der diesjährigen G7 Standardisation High-level Conference wurde Circular Economy zu dem Themabereich mit dem größten Potential für Klimaschutzmaßnahmen gesehen. In 2022 haben DIN, DKE und VDI mit über 500 Fachexperten aus Wirtschaft, Wissenschaft und Politik an einer Normungsroadmap Circular Economy gearbeitet. Die BAM war in fünf von sieben Schwerpunktthemen beteiligt. Ziel der Roadmap ist es, einen Handlungsrahmen für die Normung und Standardisierung zu schaffen, der die Transformation hin zu einer Circular Economy fördert. Normen und Standards bilden den untergesetzlichen und technischen Rahmen, auf denen eine zirkuläre Wirtschaft aufwachsen kann. Sie definieren Schnittstellen und stellen eine klare Kommunikation zwischen den verschiedenen Phasen des zirkulären Kreislaufes sicher – sie machen einen Kreislauf erst möglich. In der Präsentation sind die Highlights der Normungsroadmap Circular Economy dargestellt. Die Roadmap liefert einen Überblick über die aktuelle Normungslandschaft sowie die An- und Herausforderungen zu Schwerpunktthemen wie Elektrotechnik, Kunststoffe, Verpackungen, Textilien, Bauwerke, etc. Mit >250 Normungs- und Standardisierungsbedarfen zeigt die Roadmap konkrete Handlungsfelder auf, ebenfalls mit Überschneidungen zum Geschäftsfeld der BAM. T2 - Abteilungsseminar Abteilung S CY - Berlin, Germany DA - 11.01.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Normungsroadmap KW - Klimawandel PY - 2023 AN - OPUS4-56817 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlegel, Moritz-Caspar T1 - Normungsroadmap Circular Economy - Inhalte und Ansätze zur Umsetzung N2 - Der Vortrag umfasst eine Einsortierung der Circular Economy in der Normung, skizziert die Inhalte der DIN/DKE/VDI-Normungsroadmap Circular Economy bezüglich Digitalisierung, Elektrotechnik und IKT sowie Batterien und zeigt Schnittstellen zur Politik. Zum Schluss zeigt der Vortrag erste Ansätze zur Umsetzung der in der Normungsroadmap beschriebenen Normungsbedarfe. T2 - EXFO 2023 Global Environmental Compliance - Ecodesign & Nachhaltigkeit CY - Online meeting DA - 23.03.2023 KW - Circular Economy KW - Kreislaufwirtschaft KW - Normung KW - Ressourceneffizienz KW - Materialeffizienz PY - 2023 AN - OPUS4-57205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schünemann, Pia T1 - Novel Approaches to PFAS Monitoring: extractable organic fluorine as a PFAS sum parameter N2 - In this project a sum parameter approach (extractable organic fluorine, EOF) is used to monitor a broad spectrum of PFAS in surface water. Herein, high resolution continuum source molecular adsorption spectrometry (HR-CS-GFMAS) is employed for fast and sensitive measurements. An environmental study was carried out on the River Spree. Samples were collected over the course of one year to allow a more detailed look into seasonal changes. Following this, a range of options are being investigated with a view to removing PFAS from the environment regarding water samples. Potential adsorber materials are explored based on Graphene (in cooperation with the Haag-Group) and COFs (in cooperation with the Emmerling-Group). Initial experiments were performed, and the preliminary results are presented. Furthermore, experiments for PFAS adsorption are being improved and PFAS specific adsorption will be analyzed. Sum Parameter approaches have the chance to identify Hot-Spots in the environment and to cover a broad range of PFAS in a single measurement. Moreover, an overview of the environmental pollution is provided. T2 - PhD Retreat SFB 1349 CY - Misdroy, Poland DA - 28.04.2025 KW - PFAS KW - HR-CS-GFMAS KW - Environmental Analysis KW - Adsorber PY - 2025 AN - OPUS4-63138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bresch, Harald T1 - OECD TG 125 Particle size and size distribution of Nanomaterials N2 - This presentation was held in an OECD Webinar introducing the newly developed and published OECD TG 125 on particle size and size distribution. The presentation is explaining the structure if the TG 125 and addresses all included methods and methodologies in a short and understandable way for the broader public. The presentation includes sections about nano-particles and nano-fibres. T2 - Webinar Series on Testing and Assessment Methodologies CY - Online meeting DA - 07.02.2023 KW - Nano KW - Nanomaterials KW - OECD KW - Test guideline KW - Size PY - 2023 UR - https://www.oecd.org/chemicalsafety/nanomet/presentations-webinar-nanomaterials-particle-size-distribution-test-guideline-125.pdf AN - OPUS4-58447 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Oberbeckmann, Sonja T1 - On the intersection of microbiome and material research: what can be achieved? N2 - Any surface in the environment acts as hotspot for microbial attachment and activity. These biofilms represent the interface between humans and the environment. While in the past biofilms were often seen as disturbance, we now start to understand the enormous potential of beneficial biofilms. They can be used in a broad range of applications and are sources for new microorganisms and traits. After all, biofilms represent a great example for a collaborative lifestyle. T2 - Bioeconomy Changemakers Festival, Hereon CY - Teltow, Germany DA - 14.03.2024 KW - Biofilm KW - Microbiome KW - Sustainability KW - Biosphere KW - Microplastics PY - 2024 AN - OPUS4-60202 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stawski, Tomasz T1 - Particle-mediated origins of mesocrystalline disorder in calcium sulfate single crystals N2 - Calcium sulfate minerals are abundant in natural and engineered environments and they exist in the form of three hydrates: gypsum (CaSO4·2H2O), bassanite (CaSO4·0.5H2O), and anhydrite (CaSO4). Due to their relevance in natural and industrial processes, the formation pathways of these calcium sulfate phases from aqueous solution have been the subject of intensive research1. The state-of-the-art of the calcium sulfate formation mechanisms builds upon and goes beyond what we have come to appreciate in the astounding intricacy of other mineral formation processes from ions in aqueous solutions. The original, and rather naive, 'textbook' image of these phenomena, stemming from the adaptation of classical nucleation and growth theories, has increased in complexity due to the discovery of a variety of precursor and intermediate species2. These include solute clusters (e.g. prenucleation clusters, PNCs), liquid(-like) phases, as well as amorphous and nanocrystalline solids etc.. In this context, a number of studies have already revealed that nucleation in the CaSO4-H2O system is non-classical, where the formation of the different crystalline phases involves several steps including a common amorphous precursor1, 3, 4. In this contribution we show that the formation of the amorphous phase involves the aggregation of small primary particles into larger disordered aggregates exhibiting a "brick-in-the-wall" structure5, 6. The actual crystallization occurs by the restructuring and coalescence of the particles ("bricks") into a given calcium sulfate phase depending on the physicochemical conditions of the solution. Importantly, the rearrangement process does not continue until a (nearly-)perfect homogeneous single crystal is obtained. Instead it comes to a stop, or at least significantly slows down. Such a process thus yields a final imperfect mesocrystal, composed of smaller domains rather than a continuous crystal structure, within which the domains are separated by an amorphous (i.e. less ordered) calcium sulfate phase. Hence, the non-classical crystallization process of CaSO4 yields a final imperfect mesocrystal with an overall morphology resembling that of a single crystal, yet composed of smaller nano-domains. Importantly, these observations reveal that organic-free calcium sulfate mesocrystals grown by a particle mediated-pathway preserve in the final crystal structure a “memory” or “imprint” of their non-classical nucleation process, something that has been overlooked until now. Furthermore, the nano-scale misalignment of the structural sub-units within these crystals can propagate through the length-scales, and be expressed macroscopically as misaligned zones/domains in large single crystals. Indeed, by considering large anhydrite crystals from the famous Naica Mine (“Cueva de los cristales”) we observed a suite of correlated self-similar void defects spanning multiple length-scales7. These flaws, in the macroscopic crystal, stem from “seeds of imperfection” originating from a particle-mediated nucleation pathway. Hence, building a crystal could be viewed as Nature stacking blocks in a game of Tetris, whilst slowly forgetting the games core concept and failing to fill rows completely. T2 - ECCG: European Conference on Crystal Growth 7 CY - Paris, France DA - 25.07.2022 KW - Anhydrite KW - SAXS KW - Single crystal KW - Mesocrystal PY - 2022 AN - OPUS4-56276 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - PE-Rezyklat Einsatz in Gefahrgutbehältern? N2 - In diesem Vortrag geht es darum zu beschreiben, ob Rezyklat für PE Behälter gefüllt mit Gefahrgut Anwendung finden darf. Kanister aus Neuware und Rezyklat wurden verschiedenen Untersuchungen unterzogen. Es wurde der Feststoff und Leachable getestet. Methoden sind TED-GC/MS und GC-HRMS. Proben der Leachable wurden nach 1 und 4 Wochen genommen und die Peakanzahl vergleichen dargestellt. Als Lösemittel wurden Wasser, Ethanol, EtOAc, Ammoniak und HNO3 verwendet. T2 - Fachaustausch Projekt GeSKAR CY - Dessau, Germany DA - 10.01.2025 KW - Gefahrgutbehälter KW - Rezyklat PY - 2025 AN - OPUS4-62396 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogel, Christian T1 - Per- and Polyfluoroalkyl Substances (PFAS): from analytical methods to thermal and mechanochemical treatment N2 - Per- and polyfluoroalkyl substances (PFAS) are a large group of more than 12,000 organofluorine surfactants. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. . Current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Both approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Furthermore, the contaminated adsorbants have to be safely thermal treated for recovery. Hence, there is a great demand for innovative developments, dealing with new strategies of tackling the PFAS problem. Previously, mechanochemical treatment of polychlorinated organic compounds in soils showed an efficient dechlorination. Thus, we investigated mechanochemical treatment of PFAS contaminated soils with various additives in a ball mill. T2 - Al-Balqa Applied University seminar CY - Al-Salt, Jordan DA - 23.02.2025 KW - Combustion Ion Chromatography KW - Per- and Polyfluoroalkyl substances (PFAS) KW - XANES spectroscopy KW - Thermal treatment KW - Remediation PY - 2025 AN - OPUS4-62617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -