TY - CONF A1 - Traub, Heike T1 - Elemental mapping to study the interaction of MRI contrast agents with extracellular matrix components N2 - Non-specific Gd-based contrast agents (GBCAs) have long been routinely used in clinical magnetic resonance imaging (MRI) diagnostics. Nevertheless, the interaction of such contrast agents with tissue components is not yet fully understood. Typically, they go into extracellular space. The extracellular matrix (ECM) is a three-dimensional network of macromolecules providing structural and biochemical support of the surrounding cells in all mammalian tissues. It is composed of structural proteins (e.g., collagen, elastin) and proteoglycans, which consist of glycosaminoglycans (GAGs) covalently bound to a protein core. GAGs are long, linear polysaccharides composed of repeating disaccharide units that differ in molecular mass, disaccharide structure and degree of sulfation. Many diseases, including inflammation, fibrosis, and tumor invasion, are associated with characteristic ECM changes, especially at an early stage of disease development. As disease severity increases, the amount of one or more different GAG types in the ECM and the extent of GAG sulfation increases. Characteristic of GAGs is their ability to form complexes with cations, e.g., with lanthanides. Thus, GAGs could be a potential binding partner for GBCA molecules as a whole or for dechelated Gd. Currently, there are still many unanswered questions about the interaction of contrast agents with ECM components. In this study, therefore, the uptake and distribution of ionic Gd and various linear and macrocyclic GBCAs was investigated in spheroids as model systems mimicking the complex physiologically relevant tissue microenvironment. Chinese hamster ovary (CHO) cells and CRL-2242 cells, a CHO mutant that does not produce sulfated GAGs, were used to prepare spheroids. Afterwards the spheroids were incubated with gadolinium chloride and GBCAs. For elemental mapping laser ablation inductively coupled plasma time-of-flight mass spectrometry (LA-ICP-TOFMS) and synchrotron radiation nano X-ray fluorescence spectroscopy (syn-nanoXRF) were used. Although all spheroids were exposed to identical Gd concentrations, differences were observed in the spatial distribution and the amount of Gd taken up. After incubation with linear and macrocyclic GBCAs, Gd is detected in the interior of both types of spheroids. Furthermore, differences in the Gd amount were found depending on the GBCA used. In contrast, incubation with gadolinium chloride leads to an Gd enrichment in the outer regions of the spheroids as well as to much higher Gd contents compared to incubation with GBCAs. Both LA-ICP-TOFMS and syn-nanoXRF can make an important contribution to better understand the relationship between the affinity of GBCAs and ECM components. However, to elucidate such complex interactions, further studies are needed, also with other (bio-)analytical techniques. T2 - Euroanalysis 2025 CY - Barcelona, Spain DA - 31.08.2025 KW - ICP-MS KW - Laser ablation KW - Contrast agent KW - Spheroid KW - Extracellular matrix PY - 2025 AN - OPUS4-64143 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schoknecht, Ute A1 - Kalbe, Ute A1 - Happel, O. T1 - Combination of leaching tests with ecotoxicity and chemical analysis – Lessons learnt N2 - The presentation describes analytical methods to characterize eluates from leaching tests and identify organic substances in leachates. Chances to obtain complementary information from ecotoxtests and chemical analysis are discussed. T2 - Workshop: Ecotoxicological evaluation of construction products – test results, implementation in Guidance, Technical Standards and Ecolabelling CY - Online meeting DA - 21.03.2022 KW - Leaching KW - Ecotoxicity KW - Construction products PY - 2022 AN - OPUS4-55276 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - van den Berg, A. A1 - Adriaans, K. A1 - Hoppener, E. A1 - Parker, L. A1 - Boersma, A. A1 - Altmann, Korinna A1 - Legler, J. A1 - Pieters, R. T1 - Inflammation-related key events stimulated by micro- and nanoplastics N2 - The presence of micro- and nanoplastic particles (MNP) in our environment has raised increasing public and political concern. Increasing evidence suggests that humans are exposed to these MNP, mostly via inhalation or ingestion. The EC-Horizon project POLYRISK (https://polyrisk.science) aims to establish an IATA/AOP-based tiered approach to assess human health risks of MNP. In our research, we focus on assessing immunotoxicological effects of MNP. We have tested a series of primary, secondary, environmentally aged (incubated in River Rine water) and chemically altered MNP for their potential to affect dendritic cells or macrophages. MNP used in this study include primary and weathered PS, secondary PVC, PA, PP (with or without talc) and PE. The secondary PE and PP (w/o talc) particles appeared to have oxidized groups on their surface. Data shows that MNP can be engulfed by macrophages (PMA-stimulated human THP1 cells) and human blood-derived dendritic cells (DCs). The effects of virgin as well as secondary MNP (0, 10 or 100 μg/ml) on THP1 macrophages were limited to decrease of mitochondrial activity (Alamar blue), increase of cellular leakage (LDH), and stimulation of lysosomal activity. None of these MNP stimulated gene expression of NFκB or release of pro-inflammatory cytokines (IL-6, TNFα, IL-1β). On the other hand, secondary PP and PE with oxidized surface groups did increase NFκB gene expression and release of cytokines by THP1 macrophages. Virgin and weathered PS particles were tested using DCs, and only weathered PS did stimulate DC activity (increased costimulatory molecules CD83, CD86) and as consequence allogeneic T cells. DC activation appeared to result from environmental contaminants. In conclusion, of all MNPs tested only those that contained active surface groups or environmental components appeared to be immunostimulatory, whereas primary and secondary MNP rather reduced macrophage activity and viability (at relatively high concentrations of 100 μg/ml). Further research is needed to reveal molecular mechanisms and to translate in vitro findings to real-world exposure scenarios. T2 - 58th Congress of the European Societies of Toxicology (EUROTOX 2024) CY - Copenhagen, Denmark DA - 08.09.2024 KW - Micro- and nanoplastic particles (MNP) KW - Human health risks KW - Immunotoxicological effects PY - 2024 DO - https://doi.org/10.1016/j.toxlet.2024.07.052 AN - OPUS4-63363 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Plastik in Böden: Mikroplastik-Ergebnisse N2 - In diesem Vortrag geht um die Vorstellung der Ergebnisse des UBA Projektes Plastik in Böden. Es werden Mikroplastik-Gehalte in verschiedenen Böden präsentiert. T2 - Fachgespräch "Plastik in Böden" CY - Online meeting DA - 28.03.2022 KW - Mikroplastik KW - Mikroplastik Böden KW - Mikroplastik-Analytik PY - 2022 AN - OPUS4-54648 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik an der BAM: TED-GC/MS und Referenzmaterialien N2 - Thema ist die Funktionsweise der TED-GC/MS als Methode für die Mikroplastik-Detektion sowie die Herstellung dazugehöriger Referenzmaterialien an der BAM T2 - 25. Kolloquium Massenspektrometrie von Polymeren CY - Online meeting DA - 17.06.2021 KW - Mikroplastik KW - TED-GC/MS KW - Referenzmaterial PY - 2021 AN - OPUS4-52835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute T1 - Wie naturnah simulieren die Elutionsverfahren? N2 - Die Untersuchung altlastverdächtiger Flächen umfasst viele einzelne Schritte von der Probenahme über die Probenvorbehandlung bis hin zur eigentlichen Analyse, die zur Ergebnisunsicherheit beitragen. Beim Vergleich der Ergebnisse mit Bewertungsmaßstäben, um Entscheidungen zur Bewertung von Altlasten zu treffen, sind diese Faktoren zu berücksichtigen. Die Rolle von verschiedenen Unsicherheitskomponenten wird mit Blick auf Elutionsverfahren diskutiert. T2 - Messen, schätzen und bewerten – Theorie und Praxis der Altlastenbewertung: Online-Altlastenseminar des LLUR CY - Online meeting DA - 27.09.2021 KW - Altlasten KW - Schadstofftransfer KW - Elutionsverfahren KW - BBodSchV KW - Ergebnisunsicherheit PY - 2021 AN - OPUS4-53623 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Mikroplastik Referenzmaterial und erste Vergleichsuntersuchungen N2 - Hierbei geht es um die Vorstellung von ersten Möglichkeiten um Referenzmaterial für die Mikroplastik-Analytik herzustellen und die Ergebnisse erster Vergleichsversuche. T2 - EUROLAB-D Workshop: Mikroplastik in der Praxis CY - Online meeting DA - 30.11.2021 KW - Mikroplastik KW - Referenzmaterial KW - Vergleichsversuche PY - 2021 AN - OPUS4-53880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Systemverständnis und Untersuchungsstrategien von Kunststoffeinträgen in die Umwelt – Ergebnisse des RUSEKU-Forschungsprojektes N2 - Ziel des Vortrages ist die Vermittlung der Herausforderungen der Mikroplastik-Analytik sowie der Harmonisierung der Analytik und des Ergebnistransfers in die Normung. T2 - Jahresabschluss-Sitzung GA "Mensch und Umwelt" CY - Online meeting DA - 24.11.2021 KW - Mikroplastik KW - Mikroplastik-Analytik PY - 2021 AN - OPUS4-53830 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Reference material candidates for microplastic analysis N2 - Every day, there are new headlines in the media about microplastics (1-1000 µm, ISO/TR 21960:2020) and nanoplastics (< 1 µm, ISO/TR 21960:2020) findings all over the planet with high variations in particle number and mass. The challenges in analytics are very complex, e.g. representative sampling, non-destructive sample preparation with concentrated particles and homogeneous distribution and true detection. All together lead to lacks in harmonization and results, which are hardly comparable. On the other hand, monitoring of microplastics is mandatory in the future strictly regulated by the EU commission in the Drinking water and Wastewater Framework Directive. One step to accurate and precise results will be the development of suitable reference materials mimicking particles in the environment. BAM developed test materials, which are produced by mixing a small portion of microplastic particles with a water-soluble matrix. After solid phase dilution and homogenisation small portions are pressed into tablets and bottled in glass vials (Figure 1). These tablets are well characterized with particle size distribution and SEM images. Additionally, they are tested as reference material candidate according to homogeneity and stability for particle number with µ-IR and µ-Raman as well as on particle mass with Py-GC/MS and TED-GC/MS after ISO Guide 35. Results are promising. The material passed the homogeneity control. No changes are observed within 6 months of storage. The same tested reference material is finally used in sample preparation experiments, where environmental suspended particular matter from surface water or baby milk powders are spiked with the tablets. T2 - ESOPS CY - Berlin, Germany DA - 09.09.2024 KW - Microplastics KW - TED-GC/MS KW - Reference materials KW - Polymer 3R KW - Tablets PY - 2024 AN - OPUS4-61017 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiesner, Yosri T1 - Sample preparation methods of food and environmental matrices for microplastics analysis using TED-GC-MS N2 - Microplastic determination in food and surface waters will be increasingly carried out in the course of future directives and regulations, such as EU drinking water directive and wastewater directive. In addition to unique identification, this also includes reliable quantification. Two different methodological approaches are used for the quantification. With vibrational spectroscopic techniques such as µ-FTIR and µ-Raman, results are obtained in the form of particle number, size and shape. Instead, with thermal analytical technics as TED-GC/MS and Py-GC-MS the results are expressed as mass concentration.. Both concepts offer different information variables. In terms of routine monitoring, it is necessary to obtain a rapid sequence from sampling to the detection result. For this reason, this study focuses on TED-GC/MS and Py-GC-MS. Even though thermal analytical methods generally require less sample preparation, some matrices require it. This is usually done if the analyte concentration is too low or if strong matrix effects such as signal suppression and false positive signals occur. This talk presents advanced sample preparation for baby milk powder as food example and density separation for microplastic analysis in surface waters. A preparation protocol based on citric acid was selected for the milk to remove as much as possible of the matrix. The low pH value leads to a fast and effective protein precipitation and minimizes filter cake formation, making filtration possible, reduces the number and the amount of compounds in detection and hence, simplifies the evaluation. Microplastics in surface waters and sediments must be concentrated not only because of their low microplastics mass content but also in terms of homogeneity. For this purpose, a density separation was carried out using a concentrated sodium iodide solution, which led to a high reduction of the inorganic mineral matrix and made possible to obtain a representative subsample of initial masses of up to 80 g. T2 - 22nd European Symposium on Polymer Spectroscopy (ESOPS 24) CY - Berlin, Germany DA - 08.09.2024 KW - Microplastics KW - Harmonization KW - Preparation method microplastics KW - Detection method microplastics PY - 2024 AN - OPUS4-61015 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Round Table for Expert Stakeholders​ - The Transfer of Research into Policy and Regulation N2 - This talk gives an overwiew about the material and physico chemical characterisation of materials developed for the EU founded project PlasticsFate. Particles in 1st and 2nd sample set are presented next to their characterisatin and documentation in data sheets. Some materials are prepared for reference material and used in an interlaboratory comparison. Results are briefly discussed. T2 - Stakeholder Workshop PlasticsFate CY - Bühl, Germany DA - 17.09.2024 KW - Microplastics KW - Reference materials KW - Polymer 3R KW - Interlaboratory comparison PY - 2024 AN - OPUS4-61088 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Plastik in Böden: Mikroplastik-Analytik N2 - Im Vortrag wir eine Methode zur Analyse von Mikroplastik in Böden dargestellt. Es geht dabei um die Probenvorbereitung und Detektion. T2 - Fachgespräch "Plastik in Böden" CY - Online meeting DA - 28.03.2022 KW - Mikroplastik KW - TED-GC/MS KW - Mikroplastik-Analytik KW - Methodenentwicklung Böden PY - 2022 AN - OPUS4-54646 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Harmonisation efforts of the CUSP projects N2 - The talk is about harmonisation approaches within CUSP. First the five H2020 projects for research on risk assessment regarding microplastics topic were presented. Secondly, harmonisation process were discussed. T2 - VAMAS SC 47 Meeting CY - Turin, Italy DA - 19.10.2022 KW - Microplastics KW - Harmonisation KW - Nanoplastics KW - H2020 KW - Risk assessment PY - 2022 AN - OPUS4-56077 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braun, U. T1 - Analysis of Microplastics in Soil: Harmonisation and Standardisation - a first approach N2 - The talk is about microplastics in soil. Some results were presented with mainly state of the art according to microplastics in standardization. T2 - International Conference Microplastics in Soils CY - Berlin, Germany DA - 19.10.2022 KW - Microplastics KW - Microplastics standardisation KW - Microplastics in soil PY - 2022 AN - OPUS4-56078 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meurer, Maren T1 - Accelerated solvent extraction to identify an accurate polyethylene mass value in microplastic analytics N2 - It is of high priority to capture the extent of microplastics (MP) contamination for understanding its impact and consequences to our environment. However, due to a lack of standardized methods, MP analysis as well as its quality assurance, is still a challenge. The thermal extraction desorption-gas chromatography/-mass spectrometry (TED-GC/MS) as a novel innovative thermoanalytic method can detect MP particles in environmental samples based on their decomposition products. According to MP analysis, a distinctively larger polyethylene (PE) content in comparison to other synthetic polymers was detected in environmental samples. Various substances within the matrix which have a similar molecular structure to PE, like fats and oils, might interfere with its marker and lead to an overestimation. In this investigation an automated extraction method, the accelerated solvent extraction (ASE), is introduced as quality control tool before TED-GC/MS measurement. Thereby, not the extract like usually used, but the solid filtrate is analyzed. The aim is to clean the environmental samples from solvent removable compounds which could lead to false positive signals and thus receive a more accurate PE mass. Consequently, a sample mimicking environmental samples with a defined matrix and a known polymer mass was generated. The common polymers polyethylene, polypropylene, polystyrene and styrene-butadiene rubber, used as an indication for tire wear, were added to the matrix. Different parameters for ASE extraction were varied such as different solvents, filters and purge time. Finally, a PE recovery rate of 91 % after extraction could be reached. T2 - Micro 2022 CY - Online meeting DA - 14.11.2022 KW - PE KW - ASE KW - TED-GC/MS PY - 2022 AN - OPUS4-56347 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braun, U. T1 - Thermoanalytical methods to measure mass in microplastics N2 - The talk adresses the use of thermoanalytical methods in microplastics analysis. T2 - EUROLAB webinar: MICROPLASTICS: regulations, standards and the role of laboratories CY - Online meeting DA - 15.02.2023 KW - TED-GC/MS KW - Thermoanalytical methods KW - Microplastic mass PY - 2023 AN - OPUS4-57009 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Needs, concepts and state of the art: Top-down production of reference materials for micro- and nanoplastics and their use in harmonisation processes N2 - The talk explains the top-down production of materials suitable for mircoplastics and nanoplastics and the use in ILCs. T2 - EUROLAB webinar: MICROPLASTICS: regulations, standards and the role of laboratories CY - Online meeting DA - 15.02.2023 KW - Microplastics KW - Nanoplastics KW - ILC KW - Milling PY - 2023 AN - OPUS4-57008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - PlasticsEurope - plastic powders - Reference materials N2 - The talk gives ideas about possible collaboration between BAM and PlasticEurope and their BRIGID project. T2 - Project meeting of BRIDGIT project of PlasticsEurope CY - Online meeting DA - 01.02.2023 KW - Microplastics KW - PlasticEurope PY - 2023 AN - OPUS4-57012 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Stakeholder Workshop – Plastictrace WP1 N2 - The talk is about WP1 in the PlasticTrace project funded by Euromat. The projects harmonizes microplastic analysis by developing SOPs and reference materials. WP1 is responsible for material selection and preparation. All particles are homogeneity and stability checked according to ISO guide 35. T2 - Stakeholder workshop of PlasticTrace project CY - Online meeting DA - 14.12.2022 KW - Microplastic KW - Microplastics standardisation KW - Reference materials PY - 2022 AN - OPUS4-56772 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Altmann, Korinna T1 - Release of synthetic fibres during washing of typical household textiles: Findings from washing machine tests and resulting policy recommendations N2 - This talk summarizes the experimental setup and the results of one washing experiment under realistic conditions according to microplastic fiber release. T2 - Tackling microplastics in the environment CY - Brussels, Belgium DA - 09.03.2023 KW - Microplastics KW - Fibers of textile origin KW - Washing machine KW - Microplastic fibre release PY - 2023 AN - OPUS4-57204 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -