TY - CONF A1 - Altmann, Korinna T1 - Harmonisation efforts of the CUSP projects N2 - The talk is about harmonisation approaches within CUSP. First the five H2020 projects for research on risk assessment regarding microplastics topic were presented. Secondly, harmonisation process were discussed. T2 - VAMAS SC 47 Meeting CY - Turin, Italy DA - 19.10.2022 KW - Microplastics KW - Harmonisation KW - Nanoplastics KW - H2020 KW - Risk assessment PY - 2022 AN - OPUS4-56077 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Drago, C A1 - Wiesner, Yosri A1 - Braun, U A1 - Giovannozi, A A1 - Fadda, M A1 - Putzu, Mara A1 - Lorenzo, S A1 - Moscoso-Pérez, C A1 - Benismail, N A1 - Palma, C A1 - Almeida, J A1 - Mattarozzi, M A1 - Barbaresi, M A1 - Piergiovanni, M A1 - Masino, M A1 - Bianchi, F A1 - Careri, M A1 - v Bavel, B A1 - Maltseva, A A1 - Sillanpää, M A1 - Pröfrock, D A1 - Wippermann, D A1 - Altmann, Korinna T1 - Harmonisation of sample preparation for microplastic analysis: Recovery rates of tablets containing microplastics as reference material for food and environmental matrix N2 - Microplastic are found ubiquitarians in the environment and food products. Up to now, their impact of risks on health and environment is still controversially discussed, but based on the precautionary principle alone, their presence should be monitored and emission should be reduced (see here also the status of existing EU regulations ). The crucial point is not only the reduction of microplastics pollution but also the introduction of legally binding, standardized procedures for their analysis. The limited availability of certified reference material as well as absence of standard operating procedures to identify, characterize and quantify microplastics according to number and mass have generated lack of comparability between different analytical methods and laboratories; but also, the need of time-consuming development of own protocols for each laboratory. Further on, harmonisation and standardisation of microplastics analysis requires specific reference materials that are used to validate the measurement and to ensure the comparability of results. In the first step, we developed tablets of a water-soluble matrix, containing defined numbers of microplastic particles or mass contents. These can be solved in water and can be handled as reference materials in bottled drinking water without additional sample preparation. These samples can be measured, using mass-based methods as thermo-analytical methods like thermal desorption-gas chromatography-mass spectrometry (TED-GC/MS) or pyrolysis–gas chromatography–mass spectrometry (Py-GC/MS) and using umber-based methods as vibrational spectroscopy like Infrared and Raman directly after filtration. The aim of this work was to delevop standard operating procedure to measure microplastics in more complex matrices and to harmonise and compare different detection and characterization methods. In fact, these matrices require different additional treatments to allow a reliable quantification and identification of microplastics. T2 - SETAC Europe 2025 CY - Vienna, Austria DA - 11.05.2025 KW - Microplastics KW - Nanoplastics PY - 2025 AN - OPUS4-63366 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wilke, Olaf T1 - Harmonised test standard EN 16516 - common approach for all building products for interiors N2 - The presentation gives general information about the European Standard EN 16516 “Construction products – Assessment of release of dangerous substances – Determination of emissions into indoor air”. This test standard was developed based on the mandate M/366 of the European commission and is a horizontal reference method for the determination of volatile organic compounds (VOC) from different classes of construction (building) products. Specific test conditions are to be selected by the product TCs (technical committees) in a way that a product is tested under its intended condition of use. The test is based on the use of emission test chambers which are operated at constant air change rate and climate (23°C, 50 % r.h.) over 28 days. The standard defines the conditions and requirements for the measurement including loading factor, air change rate, sampling, analysis and calculation of emission rates of the substances. A 30 m³ reference room is described which is used to calculate air concentrations from the determined emission rates. The standard EN 16516 enables the evaluation of construction products regarding their emissions into indoor air under defined and comparable conditions. The evaluation includes the determination of identified target compounds, non-identified target compounds, volatile carcinogenic compounds and the sum values TVOC, TSVOC and R. T2 - UBA Conference - Limiting health impacts of construction products regarding VOC CY - Online meeting DA - 20.04.2021 KW - Building products KW - EN 16516 KW - Emisson testing KW - Construction products PY - 2021 AN - OPUS4-58079 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stawski, Tomasz T1 - Historical Plaster Formulations and Their Influence on Crystallographic Microstructure N2 - Historical plaster formulations offer valuable insights into advanced engineering in pre-modern cultures. This study examines two such gypsum-based recipes: Gach-e Koshteh from 14th-century Iran and Gesso Sottile from 15th-century Italy, both of which have unique characteristics and were essential for artistic and architectural decoration. By replicating these recipes in a laboratory setting, we demonstrate how traditional masters manipulated gypsum microstructure without additives to optimize the surface and mechanical properties of plaster for specific functional and artistic purposes. The Koshteh recipe involves intensive kneading during plaster hydration, which retards setting and produces a platelet-like crystal morphology with alignment of the {010} faces, resulting in a hydrophilic surface ideal for water-based wall paintings. Sottile, in contrast, relies on slow recrystallization in excess water, generating loosely packed, needle-like crystals with reduced wettability—suitable for oil-based painting and gilding. Using wide-angle X-ray scattering (WAXS), atomic force microscopy (AFM), and scanning electron microscopy (SEM), we reveal that the Koshteh recipe yields a denser, better-packed plaster with enhanced wettability, while the Sottile recipe forms larger, more loosely arranged crystals and a more hydrophobic surface. These findings underscore the ingenuity of historical materials engineering and offer valuable insights for modern conservation and sustainable restoration practices. T2 - Geo4Göttingen 2025 CY - Göttingen, Germany DA - 14.09.2025 KW - Plaster KW - Gypsum KW - Stucco KW - Cultural heritage PY - 2025 DO - https://doi.org/10.48380/4e5z-av91 AN - OPUS4-64685 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dehkohneh, Abolfazl T1 - How Single Cells and Biofilms of the Extremotolerant Black Fungus Knufia petricola Respond to Oligotrophic Environments N2 - Melanised black fungi, such as Knufia petricola, are renowned for their constitutive melanin production, extremotolerance, and ability to thrive in hostile, oligotrophic natural and built environments from Antarctic outcrops to marble monuments and solar panels. These traits make them compelling models for astrobiological research, offering insights into survival strategies under conditions analogous to extraterrestrial habitats. Here, we quantified the responses of K. petricola A95 to carbon and nitrogen supply, varying sources (C: glucose vs. sucrose; N: ammonium vs. nitrate) and concentrations (C:N ratios of 0.6 – 600), including nutrient-free controls. Biofilm radial extension and thickness, morphology, biomass, produced CO2, and carbon-use efficiency (CUE) were analysed across controlled C:N ratios after 28 days. we combined macroscale assays of biofilm formation on agar with microscale tracking of single-cell development into microcolonies in a microfluidic device. This dual-scale approach allows the study of the nutritional requirements and growth strategies of K. petricola under chronic oligotrophy and provides quantitative inputs for individual-based simulations using iDynoMiCS 2.0. Macroscale analysis identified a C:N ratio of 60 as optimal, resulting in the highest biomass and colony thickness and the highest cumulative CO2 release. Depletion or low concentrations of C or N reduced biomass and increased peripheral filamentation and higher substrate penetration. Notably, nitrate as the N source produced biofilms with more peripheral filaments and caused more wrinkles on the surface of biofilm, whereas ammonium yielded compact, smooth biofilms with little to no filamentation. The CUE ranged from 0.4 to 0.6, being lowest under nutrient limitation. Microscale observations of single cells revealed that increasing the C:N ratio from 0.6 to 60 shortened cell cycles and promoted branching, no branching formed without C and N. Thus, a denser colony at optimal conditions and a rather extended morphology under C or N limitations were observed. T2 - Berlin Early-career Space Research (BESR) conference 2025 CY - Berlin, Germany DA - 06.10.2025 KW - Black fungi KW - Oligotrophs KW - Rock-inhabiting fungi PY - 2025 AN - OPUS4-65034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - How to regulate and assess resistance risks of co-selecting agents during application and in the environment N2 - This talk deals with the question on How to regulate and assess resistance risks of co-selecting agents during application and in the environment. It shows that there the overview of worldwide activities to regulate co-selecting agents is missing. Regulations for product authorization usually consider resistance in target organisms, but there is a risk of emergence of resistance from non-target organisms as well. Moreover, pollution effects on resistance development in the environment are not explicitly covered during product authorization and few risk assessment schemes and methods available. T2 - EDAR7 - Environmental Dimension of Antimicrobial Resistance Conference 2024 CY - Montreal, Canada DA - 26.05.2024 KW - Antimicrobial resistance KW - Bacteria KW - Standardization KW - Biocides PY - 2024 AN - OPUS4-61542 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Oberbeckmann, Sonja T1 - Hunting for pigments in plastic biofilms from the Great Pacific Garbage Patch N2 - Each year, an immense amount of plastic debris enters marine ecosystems, much of which ends up in the Great Pacific Garbage Patch (GPGP). The plastic fragments are home to a diverse community of microorganisms, and while researchers have gained a better understanding of these marine plastic biofilms, we lack insights into the physiology and genomic potential of the bacteria that colonize them. Examining the lifestyle of plastic colonizers from the GPGP is particularly intriguing, as the high concentration of plastics in this accumulation zone might allow for a microbial adaptation to this unique man-made habitat. A range of pigmentation was observed in 67 isolated strains obtained directly from plastic pieces sampled from the GPGP surface water. Sequence comparison between the cultivated bacterial strains and the 16S rRNA gene amplicon dataset confirmed that most of the cultivates could also be captured through DNA-only methods. Whole genome analysis of four taxonomically diverse representatives revealed multiple carotenoid pathways, including those to produce less common glycosylated carotenoids, like sarcinaxanthin glucoside. Further, we identified a potentially new Rhodobacteraceae species containing a photosynthetic gene cluster (PGC). Absorption analysis confirmed the actual production of the carotenoids and bacteriochlorophyll a. Floating plastics represent a habitat with strong UV-light exposure, making the protection with antioxidant carotenoids as well as the ability to use light as an energy source highly beneficial traits for plastic colonizers. Our findings indicate, that the production of pigments is a common adaption mechanism for plastic-associated bacteria, and that plastic biofilms present a so far overlooked source of rare carotenoids and light-harvesting mechanisms. T2 - Annual Conference of The Association for General and Applied Microbiology (VAAM) CY - Göttingen, Germany DA - 10.09.2023 KW - Plastic biofilm KW - Phototrophic bacteria KW - Plastic pollution PY - 2023 AN - OPUS4-58443 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schreiber, Frank T1 - Hydro-Touch test - Evaluation of Transfer of Microorganisms to Non-porous Surfaces and their antimicrobial Activity N2 - This presentation describes a new test procedure that allows to determine the transfer of microorganisms to surfaces and to measure the antimicrobial efficacy of those surfaces. The main improvement of the method is that is assesses the effect of the surfaces under semi-dry, realistic conditions by transferring microorganisms via a gelatin pad linked to a stamp of defined weight. Comparing the performance of the established antimicrobial materials with currently used wet test methods and the newly developed method shows reduced antimicrobial activity of those materials under semi-dry conditions. T2 - 64. Sitzung des DIN NA 176-03-06 AA „Chemische Desinfektionsmittel und Antiseptika in der Humanmedizin“ CY - Online meeting DA - 29.09.2025 KW - Antimicrobial surfaces KW - Standardization PY - 2025 AN - OPUS4-64870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erning, Johann Wilhelm T1 - Hygienische Bewertung von SLM-gedrucktem rostfreiem Stahl N2 - Werkstoffe im Kontakt mit Trinkwasser müssen hygienisch bewertet werden. Hier wird ein bereits bewerteter Werkstoff wegen neuer Fertigungsmethoden (additive Fertigung) erneut geprüft und die Besonderheiten durch das Verfahren dargestellt. Der Werkstoff ist auch mit additiver Produktionsmethode geeignet. T2 - GfKORR - Jahrestagung CY - Frankfurt am Main, Germany DA - 05.11.2024 KW - Additive Fertigung KW - Trinkwasser KW - Korrosion KW - Nichtrostender Stahl PY - 2024 AN - OPUS4-61845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sobisch, Lydia-Yasmin T1 - Identification of Genes Involved in Susceptibility to Biocides in Sulfate-Reducing Bacteria N2 - Microbially induced corrosion (MIC) poses a significant challenge in various industries, leading to structural damage and economic losses due to the activity of microorganisms on metal surfaces. The major culprits of MIC are the sulfate-reducing bacteria (SRB). A common mitigation method is the usage of biocides to prevent MIC. However, the molecular mechanisms that determine susceptibility of SRB to biocides have been poorly understood. Our aim is to identify genes that are linked to biocide susceptibility in the model SRB strain Oleidesulfovibrio alaskensis (G20). We investigated the susceptibility of G20 towards three biocides commonly used in MIC protection: benzalkonium chloride (BAC), glutaraldehyde (GTA), and tetrakishydroxymethyl phosphonium sulphate (THPS). We determined selection of mutants in specific genes in two G20 barcoded transposon mutant libraries in the presence of these biocides and media as control along a concentration gradient up to 500 ppm. Our study investigated over 1843 genes in G20, revealing insights into their response to biocide treatments. We identified 1668 genes negatively affected by biocide treatment, while 175 genes showed improved fitness. Among the treatments leading to reduced fitness in the mutants, GTA had the highest number of solely negatively affected genes (186), followed by BAC (67) and THPS (69). There were common negative impacts on 280 genes of all four treatments (BAC, GTA, THPS, control). Notably, BAC and GTA shared 113 affected genes, BAC and THPS shared 59, and GTA and THPS shared 72. On the single gene level, mutants treated with THPS exhibited reduced fitness for the rluD gene (DDE_1447), encoding ribosomal large subunit pseudouridine synthase d, which plays a crucial role in protein biosynthesis. In the presence of BAC, mutants showed reduced fitness due to the lack of the acrB gene (DDE_0401), encoding a cationic efflux pump crucial for biocide resistance. Our findings provide leads for future research into the detailed molecular mechanisms that underlie biocide susceptibility in microorganisms responsible for MIC. Such detailed understanding will enable the development of improved MIC prevention strategies and foster a more sustainable use of biocides. T2 - International Biodeterioration and Biodegradation Symposium CY - Berlin, Germany DA - 09.09.2024 KW - Biocide Resistance KW - Transposon Mutant Libraries KW - Sulfate-Reducing Bacteria (SRB) KW - Microbially Induced Corrosion (MIC) PY - 2024 AN - OPUS4-61526 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -