TY - JOUR
A1 - Denißen, M.
A1 - Hannen, R.
A1 - Itskalov, D.
A1 - Biesen, L.
A1 - Nirmalananthan-Budau, Nithiya
A1 - Hoffmann, Katrin
A1 - Reiss, G. J.
A1 - Resch-Genger, Ute
A1 - Müller, T. J. J.
T1 - One-pot synthesis of a white-light emissive bichromophore operated by aggregation-induced dual emission (AIDE) and partial energy transfer
N2 - Merocyanine–triarylamine bichromophores are readily synthesized by sequentially Pd-catalyzed insertion alkynylation–Michael–Suzuki four-component reactions. White-light emissive systems form upon aggregation in 1 : 99 and 0.1 : 99.9 vol% CH2Cl2–cyclohexane mixtures, ascribed to aggregation-induced dual emission (AIDE) in combination with partial energy transfer between both chromophore units as supported by spectroscopic studies.
KW - Energy transfer
KW - Nano
KW - Nanoparticle
KW - Photoluminescence
KW - Fluorescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - Dye
KW - Enhancement
KW - Particle
KW - Polarity
KW - AIE
KW - Aggregation
KW - Aggregation-induced emission
KW - Solid state emission
KW - Merocyanine
PY - 2020
DO - https://doi.org/10.1039/d0cc03451g
VL - 56
IS - 54
SP - 7407
PB - Royal Society of Chemistry
AN - OPUS4-50936
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Biesen, L.
A1 - May, L.
A1 - Nirmalananthan-Budau, Nithiya
A1 - Hoffmann, Katrin
A1 - Resch-Genger, Ute
A1 - Müller, T. J. J.
T1 - Communication of Bichromophore Emission upon Aggregation – Aroyl-S,N-ketene Acetals as Multifunctional Sensor Merocyanines
N2 - Aroyl-S,N-ketene acetal-based bichromophores can be readily synthesized in a consecutive three-component synthesis in good to excellent yields by condensation of aroyl chlorides and an N-(p-bromobenzyl) 2-methyl benzothiazolium salt followed by a Suzuki coupling, yielding a library of 31 bichromophoric fluorophores with substitution patterntunable emission properties. Varying both chromophores enables different communication pathways between the chromophores, exploiting aggregation-induced emission (AIE) and energy transfer (ET) properties, and thus, furnishing aggregation-based fluorescence switches. Possible applications range from fluorometric analysis of alcoholic beverages to pH sensors.
KW - Dye
KW - Fluorescence
KW - Aggregation induced emission
KW - Signal enhancement
KW - Energy transfer
KW - Switch
KW - Sensor
KW - Quantum yield
KW - Lifetime
KW - Photophysics
KW - Synthesis
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-531123
DO - https://doi.org/10.1002/chem.202102052
VL - 27
IS - 53
SP - 13426
EP - 13434
PB - Wiley-VCH
AN - OPUS4-53112
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Frenzel, F.
A1 - Fiedler, S.
A1 - Bardan, A.
A1 - Güttler, Arne
A1 - Würth, Christian
A1 - Resch-Genger, Ute
T1 - Influence of Measurement Geometry and Blank on Absolute Measurements of Photoluminescence Quantum Yields of Scattering Luminescent Films
N2 - For a series of 500 μm-thick polyurethane films containing different concentrations of luminescent and scattering YAG:Ce microparticles, we systematically explored and quantified pitfalls of absolute measurements of photoluminescence quantum yields (Φf) for often employed integrating sphere (IS) geometries, where the sample is placed either on a sample holder at the bottom of the IS surface or mounted in the IS center. Thereby, the influence of detection and illumination geometry and sample position was examined using blanks with various scattering properties for measuring the number of photons absorbed by the sample. Our results reveal that (i) setup configurations where the scattering sample is mounted in the IS center and (ii) transparent blanks can introduce systematic errors in absolute Φf measurements.
For strongly scattering, luminescent samples, this can result in either an under- or overestimation of the absorbed photon flux and hence an under- or overestimation of Φf. The size of these uncertainties depends on the scattering properties of the sample and instrument parameters, such as sample position, IS size, wavelength-dependent reflectivity of the IS surface coating, and port configuration. For accurate and reliable absolute Φf measurements, we recommend (i) a blank with scattering properties closely matching those of the sample to realize similar distributions of the diffusely scattered excitation photons within the IS, and (ii) a sufficiently high sample absorption at the excitation wavelength. For IS setups with center-mounted samples, measurement geometries should be utilized that prevent the loss of excitation photons by reflections from the sample out of the IS.
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Quantum yield
KW - Characterization
KW - Silica
KW - Scattering
KW - Uncertainty
KW - Film
KW - Pphosphor
KW - YAG:Ce
KW - LED
KW - Converter material
KW - Solid material
KW - Polymer
KW - Composite material
KW - Advanced material
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-638304
DO - https://doi.org/10.1021/acs.analchem.4c06726
SN - 1520-6882
SP - 1
EP - 8
PB - ACS Publications
AN - OPUS4-63830
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Güttler, Arne
T1 - Certified Reference Materials for the Quantification and Standardization of Fluorescence-based Measurements
N2 - The size and shape of photoluminescence signals is affected by wavelength-, polarization-, and time-dependent instrumentspecific contributions and the compound- and environment-specific photoluminescence quantum yield. The former hamper the comparability of fluorescence measurements performed on different measuring devices. The commonly relatively done determination of the performance parameter requires suitable quantum yield standards with well-known. The performance of such measurements is, e.g., described in the written standard IEC 62607 currently revised.
T2 - Colloquium für Optische Spektrometrie 2025
CY - Jena, Germany
DA - 24.09.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Advanced material
KW - Calibration
KW - Characterization
KW - Fluorescence quantum yield
KW - Phosphor
KW - Absolute
KW - Integrating sphere spectroscopy
KW - Dye
KW - Standardization
KW - Reference material
KW - Interlaboratory comparison
KW - Uncertainty
PY - 2025
AN - OPUS4-64213
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Xu, R.
A1 - Teich, W.
A1 - Frenzel, Florian
A1 - Hoffmann, Katrin
A1 - Radke, J.
A1 - Rösler, J.
A1 - Faust, K.
A1 - Blank, A.
A1 - Brandenburg, S.
A1 - Misch, M.
A1 - Vajkoczy, P.
A1 - Onken, J. S.
A1 - Resch-Genger, Ute
T1 - Optical characterization of sodium fluorescein in vitro and ex vivo
N2 - Objective: The utilization of fluorescein-guided biopsies and resection has been recently discussed as a suitable strategy to improve and expedite operative techniques for the resection of central nervous system (CNS) tumors. However, little is known about the optical properties of sodium fluorescein (NaFl) in human tumor tissue and their potential impact on ex vivo analyses involving fluorescence-based methods.
Methods: Tumor tissue was obtained from a study cohort of an observational study on the utilization of fluorescein-guided biopsy and resection (n=5). The optical properties of fluorescein-stained tissue were compared to the optical features of the dye in vitro and in control samples consisting of tumor tissue of high-grade glioma patients (n=3) without intravenous (i.v.) application of NaFl. The dye-exposed tumor tissues were used for optical measurements to confirm the detectability of NaFl emission ex vivo. The tissue samples were fixed in 4%PFA, immersed in 30% sucrose, embedded in Tissue-Tek OCT compound, and cut to 10 mm cryosections. Spatially resolved emission spectra from tumor samples were recorded on representative slides with a Confocal Laser Scanning Microscope FV1000 (Olympus GmbH, Hamburg, Germany) upon excitation with lexc = 488 nm.
Results: Optical measurements of fluorescein in 0.9% sodium chloride (NaCl) under in vitro conditions showed an absorption maximum of lmax abs = 479 nm as detected with spectrophotometer Specord 200 and an emission peak at lmax em = 538 nm recorded with the emCCD detection system of a custom-made microscope-based single particle setup using a 500 nm long-pass filter. Further measurements revealed pH- and concentration-dependent emission spectra of NaFl. Under ex vivo conditions, confocal laser scanning microscopy of fluorescein tumor samples revealed a slight bathochromic shift and a broadening of the emission band.
Conclusion: Tumor uptake of NaFl leads to changes in the optical properties – a bathochromic shift and broadening of the emission band – possibly caused by the dye’s high pH sensitivity and concentration-dependent reabsorption acting as an innerfilter of the dye’s emission, particularly in the short wavelength region of the Emission spectrum where absorption and fluorescence overlap. Understanding the ex vivo optical properties of fluorescein is crucial for testing and validating its further applicability as an optical probe for intravital microscopy, immunofluorescence localization studies, and flow cytometry analysis.
KW - Fluorescence
KW - Optical probe
KW - Sensor
KW - Fluorescein
KW - PH
KW - Imaging
KW - Tissue
KW - Cancer
KW - Medical diagnostics
KW - Tumor
KW - In vivo
KW - Ex vivo
KW - Quantum yield
KW - Dye
KW - Quality assurance
KW - Microscopy
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527843
DO - https://doi.org/10.3389/fonc.2021.654300
SN - 2234-943X
VL - 11
SP - 1
EP - 8
PB - Frontiers Media
CY - Lausanne
AN - OPUS4-52784
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Quantifying the total and accessible amount of surface functionalities and ligands on nanomaterials
N2 - Engineered nanomaterials (NMs) of various chemical composition and surface functionalization are routinely fabricated for industrial applications such as medical diagnostics, drug delivery, sensing, catalysis, energy conversion and storage, opto-electronics, and information storage. NM dispersibility, stability, processability, and function as well as the interaction with biological species and environmental fate are largely determined by NM surface functionalities, i.e., functional groups (FGs) and ligands. Therefore, reliable, reproducible, and eventually standardized surface characterization methods are vital for quality control of NMs, and mandatory to meet increasing concerns regarding their safety.
Suitable methods for determining surface functionalities on ligand-stabilized core and core/shell NPs include advanced techniques such as traceable quantitative nuclear magnetic resonance (qNMR) as well as X-ray electron spectroscopy (XPS) and time of flight secondary ion mass spectrometry (ToF-SIMS), and simpler optical and electrochemical methods.[1] The latter less costly and fast methods, which can be automated, are often used by NM producers for process and quality control.[1,2] To validate methods, establish measurement uncertain-ties, test reference materials, and produce reference data, multi-method characterization studies are needed.[3,4] as well as interlaboratory comparisons (ILC) on determining NM surface chemistry and well characterized test and reference NMs providing benchmark values.[5,6] Here, we present examples for quantifying common surface FGs such as amino and carboxyl groups on functional NMs of different chemical composition such as silica, polymer, iron oxide, and lanthanide-based upconversion nanoparticles with optical assays, electrochemical titration methods, qNMR, and chromatographic separation techniques. In addition, ongoing interlaboratory comparisons will be presented.
T2 - Yucomat 2025
CY - Herec Novi, Montenegro
DA - 01.09.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Characterization
KW - Advanced material
KW - Surface
KW - Standardization
KW - Reference material
KW - Functional group
KW - Quantification
KW - Coating
KW - Interlaboratory comparison
KW - Uncertainty
PY - 2025
AN - OPUS4-64182
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Measurements of Photoluminescence Quantum Yields of Scattering LED Converter Materials
N2 - How to Get it Right with the Absolute Measurement of Photoluminescence Quantum Yields of Scattering LED Converter Materials Saskia Fiedler+,a, Florian Frenzel+,a, Christian Würth a, Isabella Tavernaro a, Michelle Grüne c, Stefan Schweizer c,d, Axel Engel e, and Ute Resch-Genger a* a Division Biophotonics, Federal Institute for Materials Research and Testing (BAM), Richard-Willstaetter-Strasse 11, D-12489 Berlin, Germany; email: ute.resch@bam.de b Present address: Photonic Materials, NWO-Institute AMOLF, Science Park 104, 1098 XG Amsterdam, The Netherlands c Faculty of Electrical Engineering, South Westphalia University of Applied Sciences, Lübecker Ring 2, 59494, Soest, Germany d Fraunhofer Application Center for Inorganic Phosphors, Branch Lab of Fraunhofer Institute for Microstructure of Materials and Systems IMWS, Lübecker Ring 2, 59494, Soest, Germany e Schott AG Technical Services, Hattenbergstrasse 10, D-55122 Mainz, Germany Optical measurements of scattering materials such as luminescent nano- and microparticles and phosphors dispersed in liquid and solid matrices play an important role in energy conversion, solid-state lighting, medical diagnostics, and security barcoding. A key performance parameter is the photoluminescence quantum yield QY, i.e., the number of emitted per number of absorbed photons. QY of transparent luminophore solutions can be obtained relative to a fluorescence QY standard of known QY, meanwhile available as certified reference materials.[1] The determination of QY of scattering liquid and solid samples like nanoparticle dispersions, phosphors, and optoceramics requires, however, absolute measurements with an integrating sphere setup. Despite the need for reliable absolute QY measurements, no interlaboratory comparison (ILCs) on measurement uncertainties has been performed and scattering standards with known QY are not available. We present the results of an ILC of 3 labs from academia and industry on measurements of transparent and scattering dye solutions and solid phosphors and converter materials like YAG:Ce optoceramics with commercial stand-alone integrating sphere setups of different illumination and detection geometries. Special emphasis was dedicated to the influence of measurement geometry, optical properties of the blank for determining the number of incident photons absorbed by the sample, and sample-specific surface roughness. Matching QY values could be obtained for transparent dye solutions and scattering dispersions with a blank with scattering properties closely matching those of the sample, QY measurements of optoceramic samples with different blanks revealed substantial differences of more than 20 %. Based on our data, we recommend non-absorbing blank materials with a high reflectivity (>95 %) such as a 2 mm-thick PTFE target placed on the sample holder as blanks.
T2 - eMRS
CY - Strasbourg, France
DA - 26.05.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Quantum yield
KW - NIR
KW - Characterization
KW - Electron microscopy
KW - Film
KW - Integrating sphere spectroscopy
KW - Calibration
KW - Lifetime
KW - Advanced materials
KW - LED converter
KW - YAG:Ce
KW - ILC
KW - Measurement uncertainty
KW - Absolute quantum yield
PY - 2025
AN - OPUS4-63327
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Forschung in einer Bundesoberbehörde wie der BAM
N2 - Die Bundesanstalt für Materialforschung und -prüfung (BAM) ist eine forschende Bundesoberbehörde und Einrichtung der Ressortforschung der Bundesrepublik Deutschland. Unter ihrer Leitlinie „Sicherheit in Technik und Chemie“ ist sie zuständig für die öffentliche technische Sicherheit und für metrologische Aufgaben in der Chemie. Das Aufgabenspektrum der BAM, das sich an aktuellen Fragestellungen aus Wissenschaft, Wirtschaft, Politik und Normung orientiert, bietet sehr viele interessante Tätigkeitsfelder für Naturwissenschaftler*Innen und Ingenieur*Innen.
T2 - WIFO Leipzig 2023
CY - Leipzig, Germany
DA - 05.09.2023
KW - Quality assurance
KW - Optical spectroscopy
KW - Certification
KW - Reference product
KW - Integrating sphere spectroscopy
KW - Fluorescence
KW - Quantum yield
KW - Reference material
KW - Reference data
KW - Traceability
KW - Nano
KW - Particle
KW - Analytical chemistry
KW - Sensor
KW - Safety
PY - 2023
AN - OPUS4-58397
LA - mul
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tavernaro, Isabella
T1 - pH- and O2-Responsive Nanoparticles – The MiGraGen Project
N2 - In recent years, the demand for reliable, versatile, fluorescent pH and oxygen sensors has increased rapidly in many biomedical applications since these analytes are important indicators of cell function or certain diseases. Therefore, sensor particles are needed that are small enough to penetrate cells, non-toxic, and allow for close-up optical monitoring. When developing such sensor systems, one must consider the pH and oxygen range detectable by the sensor dye and the matrix material of the used carrier particles. Here, we present the development of pH- and oxygen-responsive polymeric beads functionalized with fluorescent dyad molecules that consist of an analyte-responsive fluorophore and an analyte-inert dye.
T2 - MiGraGen Project Meeting 09.08.2023
CY - Online Meeting
DA - 09.08.2023
KW - Nano- and microsensors
KW - Functionalized silica and polymeric particles
KW - pH sensing
KW - Oxygen sensing
KW - Fluorescence
PY - 2023
AN - OPUS4-58071
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescence Encoding of Polymer Microbeads during Polymerization
N2 - Differently sized, luminescent polymer beads encoded with QDs were prepared with a simple, optimized procedure. The optical properties of the resulting particles were studied to ensure sufficient fluorescence and to evaluate the influence of the polymerization on QD fluorescence.
T2 - 84th Prague Meeting on Macromolecules - Frontiers of Polymer Colloids
CY - Prague, Czech Republic
DA - 24.07.2022
KW - Polymerization
KW - Fluorescence
KW - Quantum dots
KW - Microbeads
PY - 2022
AN - OPUS4-55447
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kage, Daniel
A1 - Hoffmann, Katrin
A1 - Borcherding, H.
A1 - Schedler, U.
A1 - Resch-Genger, Ute
T1 - Lifetime encoding in flow cytometry for bead‑based sensing of biomolecular interaction
N2 - To demonstrate the potential of time-resolved flow cytometry (FCM) for bioanalysis, clinical diagnostics, and optically encoded bead-based assays, we performed a proof-of-principle study to detect biomolecular interactions utilizing fluorescence lifetime (LT)-encoded micron-sized polymer beads bearing target-specific bioligands and a recently developed prototype lifetime flow cytometer (LT-FCM setup). This instrument is equipped with a single excitation light source and different fluorescence detectors, one operated in the photon-counting mode for time-resolved measurements of fluorescence decays and three detectors for conventional intensity measurements in different spectral windows. First, discrimination of bead-bound biomolecules was demonstrated in the time domain exemplarily for two targets, Streptavidin (SAv) and the tumor marker human chorionic gonadotropin (HCG). In a second step, the determination of biomolecule concentration levels was addressed representatively for the inflammation-related biomarker tumor necrosis factor (TNF-α) utilizing fluorescence intensity measurements in a second channel of the LT-FCM instrument. Our results underline the applicability of LT-FCM in the time domain for measurements of biomolecular interactions in suspension assays. In the future, the combination of spectral and LT encoding and multiplexing and the expansion of the time scale from the lower nanosecond range to the longer nanosecond and the microsecond region is expected to provide many distinguishable codes. This enables an increasing degree of multiplexing which could be attractive for high throughput screening applications.
KW - Fluorescence
KW - Sensor
KW - Assay
KW - Protein
KW - Multiplexing
KW - Flow cytometry
KW - Barcoding
KW - Lifetime
KW - Dye
KW - Bead
KW - Bead-based assay
KW - Method
KW - Quantification
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-516007
DO - https://doi.org/10.1038/s41598-020-76150-x
VL - 10
IS - 1
SP - 19477
PB - Nature
AN - OPUS4-51600
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Srivastava, Priyanka
A1 - Fürstenwerth, Paul Christian
A1 - Witte, J. F.
A1 - Resch-Genger, Ute
T1 - Synthesis and spectroscopic characterization of a fluorescent phenanthrene-rhodamine dyad for ratiometric measurements of acid pH values
N2 - We present the rational design, synthesis and spectroscopic characterization of a novel dual excitation, three color emitting, pH-responsive fluorescent probe consisting of two phenanthrene and one rhodamine B units linked by click chemistry. The rhodamine moiety, excitable at λEx = 315 nm and at λEx = 560 nm in its ring-opened form, provides the pH-responsive fluorophore, while the pH-insensitive phenanthrene, excited at λEx = 315 nm, serves as inert internal reference, The presence of two phenanthrene moieties enables a blue monomer and a blueish green excimer emission at 351 nm and 500 nm, respectively. Opening of the rhodamine B spirolactam ring at an acidic pH below 5.0 (pKa = 2.59 ± 0.04) switches on its emission at 580 nm. Simultaneously, the phenanthrene excimer emission decreases caused by a change in orientation of the phenanthrene units, while the monomer emission is barely affected. This sensor design enables ratiometric measurements in the low acidic pH range utilizing the intensity ratios of the rhodamine B and phenanthrene excimer emission at 580 nm and 500 nm. Alternatively, also the intensity ratios of the rhodamine B and the phenanthrene monomer emission could be exploited or the sum of the phenanthrene monomer and excimer fluorescence. To the best of our knowledge, this is the first report of ratiometric sensing utilizing such a versatile type of tricolor emissive dyad probe bearing phenanthrene moieties and showing phenanthrene monomer and excimer emission.
KW - Fluorescence
KW - Optical probe
KW - Sensor
KW - Dye
KW - Rhodamine
KW - Synthesis
KW - Photophysics
KW - PH
KW - Quantum yield
KW - Quality assurance
KW - Mechanism
KW - Chemodosimeter
KW - Phenanthrene
KW - Ratiometric
KW - Dyad
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530554
DO - https://doi.org/10.1039/d1nj01573g
SN - 1144-0546
VL - 45
IS - 31
SP - 13755
EP - 13762
PB - Royal Society of Chemistry
AN - OPUS4-53055
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - GEN
A1 - Resch-Genger, Ute
A1 - Richter, Maria
A1 - Güttler, Arne
A1 - Pauli, Jutta
A1 - Vogel, K.
A1 - Homann, Christian
A1 - Würth, Christian
T1 - Extending Certified Spectral Fluorescence Standards for the Calibration and Performance Validation of Fluorescence Instruments to the NIR – Closing the Gap from 750 nm to 940 nm with Two Novel NIR Dyes
N2 - Fluorescence methods provide spectral, intensity, polarization, and lifetime information, which contain sample- and instrument-specific contributions. Fluorescence data, comparable across instruments and laboratories, require validated calibration procedures and certified fluorescence standards.
KW - Quality assurance
KW - Reference material
KW - Fluorescence
KW - Dye
KW - Traceability
KW - Metrology
KW - Calibration
KW - Reference data
KW - Reference product
KW - Digital certificate
KW - NIR
KW - Instrument performance validation
PY - 2025
SP - 1
EP - 4
PB - Springer Nature
CY - London
AN - OPUS4-62739
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wasternack, J.
A1 - Schröder, H. V.
A1 - Witte, J. F.
A1 - Ilisson, M.
A1 - Hupatz, H.
A1 - Hille, J. F.
A1 - Gaedke, M.
A1 - Valkonen, A. M.
A1 - Sobottka, S.
A1 - Krappe, A.
A1 - Schubert, M.
A1 - Paulus, B.
A1 - Rissanen, K.
A1 - Sarkar, B.
A1 - Eigler, S.
A1 - Resch-Genger, Ute
A1 - Schalley, C. A.
T1 - Switchable protection and exposure of a sensitive squaraine dye within a redox active rotaxane
N2 - In nature,molecular environments in proteins can sterically protect and stabilize reactive species such as organic radicals through non-covalent interactions.Here, wereport a near-infrared fluorescent rotaxane in which the stabilization of a chemically labile squaraine fluorophore by the coordination of a tetralactam macrocycle can be controlled chemically and electrochemically. The rotaxane can be switched between two co-conformations inwhich thewheel either stabilizes or exposes the fluorophore. Coordination by the wheel affects the squaraine’s stability across four redox states and renders the radical anion significantly more stable—by a factor of 6.7—than without protection by a mechanically bonded wheel. Furthermore, the fluorescence properties can be tuned by the redox reactions in a stepwise manner. Mechanically interlockedmolecules provide an excellent scaffold to stabilize and selectively expose reactive species in a co-conformational switching process controlled by external stimuli.
KW - Fluorescence
KW - Dye
KW - Sensor
KW - Quantum yield
KW - Spectroscopy
KW - Photophysics
KW - Synthesis
KW - Squaraine
KW - Switch
KW - Redox-active
KW - Rotaxane
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614959
DO - https://doi.org/10.1038/s42004-024-01312-1
VL - 7
SP - 1
EP - 11
AN - OPUS4-61495
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ramirez, Alejandra
A1 - Pauli, Jutta
A1 - Crasselt, C.
A1 - Simon, S.
A1 - Schmidt, W.
A1 - Resch-Genger, Ute
T1 - The effect of a polycarboxylate ether on C3A / CaSO4.2H2O passivation monitored by optical spectroscopy
N2 - Polycarboxylate ethers (PCEs) are widely used in construction, but the exact nature of their interaction with cement is still debated. Aiming at a better understanding of the role of tricalcium Aluminate (C3A) in cement hydration, we assessed the potential of optical spectroscopy in combination with a water-soluble fluorescent organic reporter dye (S0586) to monitor the early hydration of C3A in the presence of 26 wt% CaSO4.2H2O (C3A26G-S) with and without PCE. As optical methods, steady-state fluorescence and diffuse reflectance (UV–VisDR) spectroscopy were employed. Phase characterization and particle size distribution were performed with in-situ X-ray diffraction (in-situ XRD) and dynamic light scattering (DLS). Our results show that fluorescence and UV–VisDR spectroscopy can be used to monitor the formation of metastable phases by the disaggregation of the dye S0586 in a cement paste as well as changes in ettringite formation. Addition of PCE slowed down the disaggregation of the dye as reflected by the corresponding changes of the dyes absorption and fluorescence. This prolonged induction period is a well-known side effect of PCEs and agrees with previous reported calorimetric studies and the Inhibition of gypsum dissolution observed by in-situ XRD. This demonstrates that fluorescence and UV–VisDR spectroscopy together with a suitable optical probe can provide deeper insights into the influence of PCE on C3A-gypsum hydration which could be e.g., utilized as screening method for comparing the influences
of different types of PCEs.
KW - Fluorescence
KW - Cement
KW - Nano
KW - Particle
KW - Optical spectroscopy
KW - PCE
KW - XRD
KW - Calorimetry
KW - Monitoring
KW - Diffuse
KW - Reflection
KW - Phase
KW - Dye
KW - Optical probe
KW - Cyanine
KW - Sensor
KW - Method
KW - Analysis
PY - 2020
DO - https://doi.org/10.1016/j.conbuildmat.2020.121856
VL - 270
SP - 121856
PB - Elsevier Ltd.
AN - OPUS4-52118
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hudson, A.D.
A1 - Jamieson, O.
A1 - Crapnell, R.D.
A1 - Rurack, Knut
A1 - Soares, T.C.C.
A1 - Mecozzi, F.
A1 - Laude, A.
A1 - Gruber, J.
A1 - Novakovic, K.
A1 - Peeters, M.
T1 - Dual detection of nafcillin using a molecularly imprinted polymer-based platform coupled to thermal and fluorescence read-out
N2 - Reported here is the production of molecularly imprinted polymer (MIP) films, integrating a fluorescent moiety that serves as both an element for template interaction and signalling, for the thermal and optical detection of the beta-lactam antibiotic nafcillin. Fluorescein methacrylate (FluMa) was synthesized and introduced during the molecular imprinting process as the sole monomer and in a 1 : 1 mixture with methacrylic acid (MAA), allowing to draw first conclusions on the MIP formation potential of such a rather large and rigid monomer. At first, MIP microparticles containing FluMa were prepared by free radical polymerisation. Optical batch rebinding experiments revealed that FluMa can act as a functional monomer for selective detection of nafcillin; however, the addition of MAA as co-monomer significantly improved performance. Subsequently, thin MIP films containing FluMa were deposited onto functionalised glass slides and the influence of porogen, drying time, and monomer composition was studied. These MIP-functionalised glass electrodes were mounted into a customised 3D-printed flow cell, where changes in the liquid were either evaluated with a thermal device or using fluorescence bright field microscopy. Thermal analysis demonstrated that multiple MIP layers enhanced sensor specificity, with detection in the environmentally relevant range. The fluorescence bright field microscope investigations validated these results, showing an increase in the fluorescence intensity upon exposure of the MIP-functionalised glass slides to nafcillin solutions. These are promising results for developing a portable sensor device that can be deployed for antibiotics outside of a dedicated laboratory environment, especially if sensor design and fluorophore architecture are optimised.
KW - Molecularly Imprinted Polymers
KW - Fluorescence
KW - Antibiotics
KW - Heat-transfer Measurements
KW - Thin films
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-540044
DO - https://doi.org/10.1039/D1MA00192B
VL - 2
IS - 15
SP - 5105
EP - 5115
PB - Royal Society of Chemistry
CY - Cambridge
AN - OPUS4-54004
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Prakash, Swayam
T1 - Development of a Rapid and Sensitive Fluorometric Detection Method for Urobilin Analysis for On-site Water Quality Assessment
N2 - The W.H.O. estimated that globally at least 2 billion people use drinking water sources contaminated with faeces and according to UNICEF, most of these faecal contaminants detection methods are expensive, time-consuming (18–24 h time to result), and, with few exceptions, not suited for on-site analysis. Hence, there is an urgent need for the development of rapid analytical methods that allow to unequivocally assess drinking water quality directly on-site. Our approach exploits the weak fluorescence of faecal biomarkers such as urobilin (UB), which is enhanced through complexation with Zn2+ in alcoholic media and is the basis of their detection/estimation, known as Schlesinger’s test.3 However, this method is associated with limitations, as the fluorescence of Zn2+ complexes of UB in water is weak, shows time dependent loss of emission intensity and has strong interference from humic substances that naturally present in surface waters. ,
To circumvent these issues and achieve the rapid and sensitive on-site detection of FPs, silane-functionalized glass fibre paper test strips were developed following the ‘drop-&-detect’ concept. Drop casting of water samples containing faecal contaminants like UB on specifically functionalized test strips allowed the sensitive detection with a smartphone coupled to a 3D printed optical setup. A series of silanes were used to functionalize glass fibre paper and tune its hydrophobicity, exploiting the influence of matrix tailoring to enhance binding of the Zn2+ salt used as co-reagent to bind UB for optimal fluorometric response. A detection spot was designed by the combination of hydrophilic and hydrophobic silanes with ZnCl2-impregnated test strips. This developed analytical method showed sensitive (nano- and sub-nanomolar concentration) response for UB detection. Furthermore, it can be successfully applied to the analysis of real water samples, allowing for the first time to test for faecal contamination in fresh water directly on-site using a smartphone in only a few minutes, instead of >10 h required for the current standard, i.e., lab-based bacterial tests.
T2 - 14th International Conference on Instrumental Methods of Analysis: Modern Trends and Applications
CY - Kefalonia, Greece
DA - 14.09.2025
KW - Faecal contamination
KW - Fluorescence
KW - Metal complexes
KW - Water analysis
KW - Optical and chemical sensing
KW - Spectroscopy
KW - Onsite analysis
KW - Rapid testing
PY - 2025
AN - OPUS4-64270
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Gawlitza, Kornelia
T1 - Using Dual Fluorescent Molecularly Imprinted Particles Coupled with a Miniaturized Opto-Microfluidic Platform for On-Site Detection of Perfluoroalkyl Carboxylic Acids
N2 - Per- and polyfluoroalkyl substances (PFAS) are a group of synthetic organofluorine chemicals widely used in the production of various materials, including firefighting foams, adhesives, and coatings that resist stains and oil. In recent years, PFAS have gained attention as emerging environmental contaminants, with particular emphasis on perfluoroalkyl carboxylic acids (PFCAs), the most common type of PFAS. PFCAs are defined by a fully fluorinated carbon chain and a charged carboxylic acid group. They have been classified as Substances of Very High Concern and included in the REACH Candidate List due to their persistence, resistance to biodegradation, and toxicological impacts.
Traditional methods for analyzing PFCAs, like GC-MS, HRMS, and HPLC-based techniques, are time-consuming, non-portable, expensive, and require specialized expertise. On the other hand, fluorescence assays offer a user-friendly, portable, and cost-effective alternative with high sensitivity and quick results, particularly when the binding of the analyte causes a specific increase in the probe’s fluorescence. Combining these probes with a carrier platform and a miniaturized optofluidic device presents a promising approach for PFCA monitoring.
In this study, a new guanidine BODIPY fluorescent indicator monomer was synthesized, characterized, and incorporated into a molecularly imprinted polymer (MIP) designed for the specific detection of perfluorooctanoic acid (PFOA). The MIP layer was formed on silica core nanoparticles doped with tris(bipyridine)ruthenium(II) chloride, serving as an optical internal reference for calibration-free assays. In combination with an extraction step prior to sample analysis, this system enables selective and reliable detection of PFCAs in surface water samples, minimizing interference from competing substances, matrix effects, and other factors. When integrated into an opto-microfluidic setup, the assay provided a compact, user-friendly detection system capable of detecting micromolar levels of PFOA in under 15 minutes from surface water samples.
T2 - ANAKON2025
CY - Leipzig, Germany
DA - 10.03.2025
KW - Perfluorooctanoic Acid (PFOA)
KW - On-site detection
KW - Fluorescence
KW - Microfluidics
KW - Molecularly Imprinted Polymers
PY - 2025
AN - OPUS4-62712
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Prakash, Swayam
T1 - Fluorescence Spectroscopy as an Analytical Tool for Rapid and Sensitive Faecal Pigments Detection: From Fundamentals to Onsite Applications
N2 - W.H.O estimated that globally at least 2 billion people use drinking water sources contaminated with faeces [1] and according to UNICEF, most of these faecal detection methods are expensive, time-consuming (18–24 h time to result),[2] and, with few exceptions, not suited for on-site analysis.[3] Hence, there is an urgent need for the development of analytical methods that allow to unequivocally test for drinking water quality directly on-site.
Today, microbial detection methods primarily targeting E. coli, the major faecal indicator bacteria, are still the prevalent methods for detecting faecal contamination of drinking and recreational waters. As an alternative, Schlesinger proposed the detection of urobilin (UB), a metabolic degradation product of haemoglobin occurring in all mammals, as faecal indicator pigment (FIP) through enhancement of its weak fluorescence by complexation with Zn2+ in alcoholic media already 120 years ago.[4] However, the major limitation of this method is the only weak enhancement of the intrinsically very weak UB fluorescence in aqueous media, requiring either the use of organic solvents or very sensitive instrumentation to reach the relevant detection limits, hampering the method’s use outside of a laboratory environment.[3]
In the present work, we addressed the shortcomings relying on interfacial and supramolecular chemistry as well as materials functionalization, transforming Schlesinger’s approach into a fluorometric ‘drop and detect’ assay using a smartphone coupled to a 3D-printed optical setup as a simple and portable device. A series of silanes were used to functionalize glass fibre paper and tune its hydrophobicity, exploiting the influence of matrix tailoring to enhance binding of the Zn salt used as co-reagent to UB for optimal fluorescence response. Combination of bis(2-hydroxyethyl)-3-aminopropyltriethoxysilane and N-octyltrimethoxysilane with ZnCl2-impregnated test strips showed the best response for sensitive (nano- and sub-nanomolar concentration) smartphone-based FIP detection. The obtained fluorescence sensing results were validated with a benchtop fluorometer. Furthermore, the developed analytical method was successfully applied to the analysis of real water samples, allowing for the first time to test for faecal water contamination directly on site in a very short time of few minutes.
T2 - Anakon 2025
CY - Leipzig, Germany
DA - 10.03.2025
KW - Faecal contamination
KW - Fluorescence
KW - Metal complexes
KW - Water analysis
KW - Optical and chemical sensing
PY - 2025
AN - OPUS4-62795
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Prakash, Swayam
T1 - Photophysical Understanding of Urobilin and its Zinc Complexes for Water Quality Testing
N2 - Faecal contaminants in water are considered serious threats for human health, due to the presence of viruses, bacteria and other harmful microorganisms.1 Urobilin (UB) is a well-known faecal pigment and can be used as a marker for faecal matter in water.2 UB is commonly present in the urine of all mammals as the catabolic end product of bilirubin degradation.2 As the only simple chemical approach to its detection, Schlesinger’s test is usually used to enhance the weak fluorescence of UB in alcoholic media by complexation with Zinc.2, 3 The major limitation of this method is the only weak enhancement of the intrinsically weak UB fluorescence in aqueous media.3 This work presents an approach to introduce different Zn salts for improved fluorescence response, where we found a clear dependence of the fluorescence yield of UB-Zn(II) complexes on the counterion of the salt in water. By employing a combination of fluorescence parameters like transition energy, fluorescence intensity, and fluorescence lifetime, a photophysical understanding of the structure and conformation of the UB-Zn(II) complexes responsible for the fluorescence enhancement in water could be gained. The possibilities of developing a sensitive analytical method based on the acquired understanding are also discussed.
T2 - Central European Conference on Photochemistry CECP 2024
CY - Bad Hofgastein, Austria
DA - 18.02.2024
KW - Water analysis
KW - Faecal contamination
KW - Metal complexes
KW - Fluorescence
PY - 2024
AN - OPUS4-59874
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Biyikal, Mustafa
T1 - Development of a handheld device for the trace detection of explosives
N2 - This presentation introduces a new explosives trace detector (ETD), a handheld device developed by True Detection Systems (TDS). Addressing the limitations of current handheld detectors—such as unreliable measurements and cumbersome operation— the new ETD XT-1 integrates advanced sensor technology, including a Lab-on-a-Chip, to deliver high sensitivity and accuracy. Capable of detecting trace levels of substances like TNT, TATP, and ammonium nitrate, the device offers rapid, user-friendly detection through AI/ML-enhanced algorithms. These algorithms enable precise substance identification by analyzing absorption and desorption rates, significantly reducing false positives. The XT-1 has broad applications in security, hazardous material detection, and environmental monitoring.
T2 - Photonics Days Berlin Brandenburg
CY - Berlin, Germany
DA - 09.10.2024
KW - Explosives
KW - Trace detection
KW - Handheld device
KW - Lab-on-a-chip
KW - Fluorescence
PY - 2024
AN - OPUS4-61433
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Homann, Christian
A1 - Peeters, Régis
A1 - Mirmajidi, Hana
A1 - Berg, Jessica
A1 - Fay, Michael
A1 - Rodrigues, Lucas Carvalho Veloso
A1 - Radicchi, Eros
A1 - Jain, Akhil
A1 - Speghini, Adolfo
A1 - Hemmer, Eva
T1 - Rapid microwave-assisted synthesis of morphology-controlled luminescent lanthanide-doped Gd2O2S nanostructures
N2 - Gadolinium oxysulfide (Gd2O2S) is an attractive material of demonstrated suitability for a variety of imaging applications, leveraging its magnetic, scintillating, and luminescent properties, particularly when doped with optically active lanthanide ions (Ln3+). For many of these applications, control over size and morphology at the nanoscale is crucial. This study demonstrates the rapid microwave-assisted Synthesis of colloidal Ln2O2S (Ln = Gd and dopants Yb, Er, Tb) nanostructures in as little as 20 min. Structural characterization using X-ray diffraction analysis (XRD), Raman spectroscopy, as well as Transmission electron microscopy (TEM), including elemental mapping via energy dispersive X-ray spectroscopy (EDS), unveiled the key role of elemental sulphur (S8) in the reaction mixtures for materials growth. By systematically varying the Ln-to-S ratio from 1 : 0.5 to 1 : 15, controlled morphologies ranging from triangular nanoplatelets to berry- and flower-like shapes were achieved. Doping with Er3+/Yb3+ endowed the nano-triangles with upconverting and near-infrared emitting properties. Tb3+-doped Gd2O2S exhibited the characteristic green Tb3+ emission under UV excitation, while also showing X-ray excited optical luminescence (XEOL), rendering the material interesting as a potential nano-scintillator.
KW - Upconversion
KW - Microwave-assisted synthesis
KW - Synthesis
KW - Fluorescence
KW - Nano
KW - Particle
KW - NIR
KW - XRD
KW - X-ray fluoressence
KW - Morphology control
KW - Raman
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-647907
DO - https://doi.org/10.1039/D5TC01646K
SN - 2050-7526
VL - 13
IS - 35
SP - 18492
EP - 18507
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-64790
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Rurack, Knut
T1 - Reaction-based BODIPY dyes as powerful tools in fluorescence sensing applications
N2 - The reversible analyte-induced switching between a colourless leuco form of a dye and its coloured all-π-conjugated form is one of the oldest concepts in probe- or indicator-based optical analysis,1 constituting so-called “one-color indicators”.2 In contrast to colour changes in the visible region, for which usually a bond-forming or a non-covalent interaction between a functional group on an indicator and an analyte is responsible, the extraordinarily large shifts of 150–250 nm seen for leuco-to-all-π-conjugated transformation are only possible when the reaction takes place directly at a site that is an intrinsic part of a dye’s π-system; the classic case are triphenylmethane dyes.3 Despite its obvious potential, this approach has not been a very popular area of scientific research for decades, perhaps because it is much more difficult to implement selectivity than by modifying terminal functional groups. However, in recent years, reaction-based fluorescence probes have attracted increasing attention by virtue of their superior sensitivity.4,5
Nowadays, rhodamines and fluoresceins are by far the most prominent groups of reaction-based indicators.5 They are usually switched between a colourless and non-fluorescent and a greenish-yellowish absorbing and yellowish-reddish emitting form. Typically, the coloured and fluorescent form is ionic, while the colourless form is neutral, reactions having mainly be designed to occur at the end groups of the xanthenoid π-system. BODIPY dyes, with their favourable spectroscopic and chemical properties as well as facile wavelength tunability features have only very recently been explored into this direction.6,7 Reaction at the core dipyrrin framework of these dyes led to strong colour and fluorescence modulations with potential applications in materials sciences6 and cell imaging.7 The present contribution will highlight the mechanisms at play and the sensing performance realized so far, and will compare core-reactive approaches to reaction-based signalling that involves π-extension of BODIPYs.8,9
T2 - 11th International Conference on Porphyrins and Phthalocyanines (ICPP-11)
CY - Online meeting
DA - 26.06.2021
KW - Indicators
KW - Fluorescence
KW - Sensing
KW - BODIPY Dyes
PY - 2021
AN - OPUS4-54001
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Jiang, Shan
A1 - Gawlitza, Kornelia
A1 - Rurack, Knut
T1 - Dual-Fluorescent Nanoparticle Probes Consisting of a Carbon Nanodot Core and a Molecularly Imprinted Polymer Shell
N2 - Dual-fluorescent molecularly imprinted nanoparticles with a red-emissive carbon nanodot-doped silica core and a chlorogenic acid-imprinted fluorescent polymer layer are prepared and their use in ratiometric fluorometric analysis is described. Nanoparticle probes consisting of a shielded and stably emitting core and a shell with embedded binding sites that indicates the presence of an analyte with a change in emission allow for internally referenced measurements potentially accounting for detrimental influences from instrument drifts, light source fluctuations or sensor materials-related inhomogeneities.
KW - Molecular imprinting
KW - Fluorescence
KW - Core-shell particles
KW - Chlorogenic acid
KW - Ratiometric measurement
PY - 2021
DO - https://doi.org/10.1007/978-1-0716-1629-1_17
VL - 2359
SP - 195
EP - 208
PB - Springer
CY - Humana, New York, NY
AN - OPUS4-53336
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tobias, Charlie
T1 - Dip-stick coated with Polystyrene-Silica Core-Shell particles for the detection of microbiological fuel contamination
N2 - The microbial contamination of fuels by fungi or bacteria presents risks such as corrosion and fuel system fouling, which can produce critical problems in refineries and distribution systems and has a significant economic impact at every phase of the process. Many factors have been cited as responsible for microbial growth, like the presence of water in the storage tanks. Indeed, only 1 % water in a storage system is enough for the growth of microorganisms like bacteria or yeasts, as well as for the development of fungal biomass at the oil/water interface.1
In this work, a rapid test for the accurate determination of genomic DNA from aqueous fuel extracts is presented. The detection is based on the employment of polystyrene-mesoporous silica core-shell particles, on which modified fluorescent molecular beacons are covalently grafted. Those beacons incorporate in the hairpin loop a target sequence highly conserved in all bacteria, corresponding to a fragment of the 16S ribosomal RNA subunit. The designed single-stranded molecular beacon contained fluorescein as an internal indicator and a quencher in its proximity when not hybridized. Upon hybridization in presence of the target sequence, the indicator and the quencher are spatially separated, resulting in fluorescence enhancement. To perform the assay the designed particles were disposed on different glass fiber strips to try to achieve a portable and sensitive rapid test. Assays showed that presence of genomic DNA extracts from bacteria down to 50–70 μg L-1 induces a fluorescence response. The optical read-out was adapted for on-site monitoring by adapting a 3D-printed case on a conventional smartphone, taking advantages of the CMOS detector sensitivity.2 Such embedded assembly allowed to detect genomic DNA in aqueous extracts down to the mg L-1 range and presents an interesting step toward on-site monitoring of fuel contamination.
T2 - Europtrode 2021
CY - Warsaw, Poland
DA - 28.11.2021
KW - Bacgteria
KW - Fungi
KW - Rapid test
KW - Fluorescence
KW - Smartphone
KW - Biofouling
PY - 2021
AN - OPUS4-53867
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescent, nanoparticle-loaded polymer microparticles - comparing synthesis routes
N2 - Our comparison showed that the route used for the synthesis of luminescent, NP-loaded PSMPs can play a significant role for the luminescence properties, as well as the number of accessible SFGs, and hence subsequent functionalization. This should be considered for future applications.
T2 - Bunsen-Tagung 2023
CY - Berlin, Germany
DA - 05.06.2023
KW - Fluorescence
KW - Polymerization
KW - Microbeads
KW - Quantum dots
KW - Comparison
PY - 2023
AN - OPUS4-57628
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Srivastava, Priyanka
A1 - Tavernaro, Isabella
A1 - Genger, C.
A1 - Welker, P.
A1 - Huebner, Oskar
A1 - Resch-Genger, Ute
T1 - Multicolor Polystyrene Nanosensors for the Monitoring of Acidic, Neutral, and Basic pH Values and Cellular Uptake Studies
N2 - A first tricolor fluorescent pH nanosensor is presented, which was rationally designed from biocompatible carboxylated polystyrene nanoparticles and two analyte-responsive molecular fluorophores. Its fabrication involved particle staining with a blue-red-emissive dyad, consisting of a rhodamine moiety responsive to acidic pH values and a pH-inert quinoline fluorophore, followed by the covalent attachment of a fluorescein dye to the particle surface that signals neutral and basic pH values with a green fluorescence. These sensor particles change their fluorescence from blue to red and green, depending on the pH and excitation wavelength, and enable ratiometric pH measurements in the pH range of 3.0−9.0. The localization of the different sensor dyes in the particle core and at the particle surface was confirmed with fluorescence microscopy utilizing analogously prepared polystyrene microparticles. To show the application potential of these polystyrene-based multicolor sensor particles, fluorescence microscopy studies with a human A549 cell line were performed, which revealed the cellular uptake of the pH nanosensor and the differently colored emissions in different cell organelles, that is, compartments of the endosomal-lysosomal pathway. Our results demonstrate the underexplored potential of biocompatible polystyrene particles for multicolor and multianalyte sensing and bioimaging utilizing hydrophobic and/or hydrophilic stimuli-responsive luminophores.
KW - Microparticle
KW - Fluorescence
KW - Sensor
KW - pH
KW - Quantum yield
KW - Multiplexing
KW - Imaging
KW - Cell
KW - Quality assurance
KW - Nano
KW - Polymer
KW - Bioimaging
KW - Particle
KW - Application
PY - 2022
DO - https://doi.org/10.1021/acs.analchem.2c00944
VL - 94
IS - 27
SP - 9656
EP - 9664
PB - ACS
AN - OPUS4-55365
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Engineered Nanomaterials- Novel Approaches for Risk Assessment and Safe-by-Design
N2 - The overall interest in nanotoxicity, triggered by the increasing use of nanomaterials in the material and life sciences, and the synthesis of an ever increasing number of new functional nanoparticles calls not only for standardized test procedures1,2 and for efficient approaches to screen the potential genotoxicity of these materials, but also for standardized and validated methods for surface analysis.
4,5 The analysis and quantification of surface chemistry is hence in the focus of an increasing number of standardization organizations and interlaboratory comparisons with different analytical methods are being done.5 For the monitoring of nanomaterial synthesis and the fast assessment of the number of functional groups such as carboxyl and amino functionalities, which are very commonly used functionalities in the life sciences, simple and validated methods are needed that can be performed with common laboratory instrumentation. 5,6 Here we provide a brief overview of the ongoing research in division Biophotonics employing quantitative NMR (qNMR), conductometry, and colorimetric and fluorometric optical assays for the determination of the total and the accessible number of carboxyl and amino groups on differently sized polymer and silica nano- and microparticles.5-7
T2 - Workshop NanoRiskSD project
CY - Berlin, Germany
DA - 09.06.2022
KW - Nanoparticle
KW - Surface analysis
KW - Standardization
KW - Quality assurance
KW - Validation
KW - qNMR
KW - Silica
KW - Polymer
KW - Fluorescence
KW - Assay
KW - Conductometry
KW - Method comparison
KW - Analytical sciences
PY - 2022
AN - OPUS4-54999
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Design and Quantitative Characterization of Functional Molecular Chromophores and Nanomaterials with UV/vis/NIR/IR Emission – An Overview of Research Activities in Division Biophotonics
N2 - In the focus of division Biophotonics are the design, preparation, analytical and spectroscopic characterization, and application of molecular and nanoscale
functional materials, particularly materials with a photoluminescence in the visible, near infrared (NIR) and short-wave infrared (SWIR). This includes optical reporters for bioimaging and sensing, security and authentication barcodes, and materials for solid state lighting, energy conversion, and photovoltaics. For the identification of optimum particle structures quantitative spectroscopic studies are performed under application-relevant conditions, focusing on the key performance parameter photoluminescence quantum yield. In addition, simple, cost-efficient, and standardizable strategies for quantifying functional groups on the surface of nano- and microparticles are developed, here with a focus on optical assays and electrochemical titration methods, cross-validated by more advanced methods such as quantitative NMR. In addition, reference materials and reference products are developed for optical methods, particularly luminescence techniques, and for analytical methods utilized for the characterization of nanomaterials.
T2 - Projekttreffen Nile-Chrome 2.0
CY - Mainz, Germany
DA - 11.12.2023
KW - Fluorescence
KW - Quantum yield
KW - Optical spectroscopy
KW - Reference material
KW - Reference data
KW - Quality assurance
KW - Dye
KW - Reference product
KW - NIR
KW - SWIR
KW - Nano
KW - Particle
KW - Silica
KW - Polymer
KW - Surface group analysis
KW - Sensor molecules
PY - 2023
AN - OPUS4-59123
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tavernaro, Isabella
T1 - Design of Fluorescent, Amorphous Silica-NPs and their Versatile Use in Sensing Applications
N2 - Surface functionalized silica nanoparticles (SiO2-NP) gained great interest in the life and material sciences, as they can be used e.g. as drug carriers, fluorescent sensors, and multimodal labels in bioanalytical assays and imaging applications. They are highly stable, are easily produced and modified on a large scale at low cost and can be labeled or stained with a multitude of sensor dyes. These dye modified particle conjugates have several advantages as compared to conventional molecular probes like enhanced brightness, ease of designing ratiometric systems by combining analyte-sensitive and inert reference dyes, and increased photostability. Moreover, stained nanoparticles can enable the use of hydrophobic dyes in aqueous environments.
Here we present our work on multicolored sensors for the measurement of pH, oxygen and saccharides utilizing amorphous SiO2 NPs.
T2 - Focus Area Day Analytical Sciences 2023
CY - Berlin, Germany
DA - 20.04.2023
KW - Amorphous silica particles
KW - Particle Synthesis
KW - Nano
KW - Ratiometric Sensors
KW - Fluorescence
KW - pH probe
KW - Dye
PY - 2023
AN - OPUS4-59151
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Wegner, Karl David
T1 - Advancing Short-Wave Infrared (SWIR) Emission
N2 - There is a growing interest in the exploitation of the short-wave infrared (SWIR), which refers to the wavelength band of light between 900 nm and 2500 nm. Luminophores that emit in the SWIR are used in various areas of telecommunications, photovoltaics, security systems (night vision), and in biomedicine. In particular for biomedical applications, the SWIR range is highly promising because light scattering, absorption, and autofluorescence of tissue and biological compounds are strongly reduced compared to the visible (400–700 nm) and NIR (~700–900 nm). The benefits of SWIR-emissive QDs have been demonstrated for a variety of applications, such as in thermal sensing, as photoelectrochemical biosensor, in in vivo vascular imaging, and for fluorescence-guided surgery.[1]
Full exploitation of SWIR photoluminescence (PL) imaging and sensing is currently hampered by i.) a lack of suitable advanced nanomaterials with a high PL quantum yield (PL QY) and a high brightness, that can be used safely in vivo and ii.) a lack of quantitative and reliable data on the optical properties of many SWIR emitters. Promising nanomaterials for the SWIR are heavy metal-free Ag2S quantum dots (QDs).
Aiming for the development of SWIR advanced nanomaterials with optimum performance, we have dived deeper into the photophysical processes occurring in these nanomaterials, thereby exploring in depth how the environment such as temperature, surface ligand composition, and the incorporation of transition metals influence the optical properties Ag2S QDs. We observed a strong enhancement of the SWIR emission of upon addition of metal ions such as Zn2+, yielding PL quantum yields of about 10% and thus making them highly suitable for non-invasive deep imaging of vascular networks and 3D fluid flow mapping.
T2 - Anakon 2025
CY - Leipzig, Germany
DA - 10.03.2025
KW - Quantum dots
KW - Nano
KW - Particle
KW - SWIR
KW - Fluorescence
KW - Temperature
KW - Ag2S
KW - Quality assuarance
KW - Ligand
KW - Sensor
PY - 2025
AN - OPUS4-62769
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Witte, F.
A1 - Rietsch, P.
A1 - Sinha, S.
A1 - Krappe, A.
A1 - Joswig, J.-O.
A1 - Götze, J. P.
A1 - Nirmalananthan-Budau, Nithiya
A1 - Resch-Genger, Ute
A1 - Eigler, S.
A1 - Paulus, B.
T1 - Fluorescence Quenching in J‑Aggregates through the Formation of Unusual Metastable Dimers
N2 - Molecular aggregation alters the optical properties of a system as fluorescence may be activated or quenched. This is usually described within the well-established framework of H- and J-aggregates. While H-aggregates show nonfluorescent blueshifted absorption bands with respect to the isolated monomer, Jaggregates are fluorescent displaying a redshifted peak. In this publication, we employ a combined approach of experiment and theory to study the complex aggregation features and photophysical properties of diaminodicyanoquinone derivatives, which show unusual and puzzling nonfluorescent redshifted Absorption bands upon aggregation. Our theoretical analysis demonstrates that stable aggregates do not account for the experimental observations.
Instead, we propose an unprecedented mechanism involving metastable dimeric species formed from stable dimers to generate nonfluorescent J-aggregates. These results represent a novel kind of aggregation-induced optical effect and may have Broad implications for the photophysics of dye aggregates.
KW - Fluorescence
KW - Llifetime
KW - Dye
KW - Quantum yield
KW - Label
KW - Reporter
KW - Aggregation
KW - Monomer
KW - Heory
KW - Mechanism
KW - photophysics
PY - 2021
DO - https://doi.org/10.1021/acs.jpcb.1c01600
SN - 1520-5207
VL - 125
IS - 17
SP - 4438
EP - 4446
PB - ACS Publikations
AN - OPUS4-52619
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Introduction to Fluorescence Spectroscopy
N2 - A brief introduction to fluorescence spectroscopy will be provided, ranging from typically measured fluorescence quantities over instrument-specific contributions to measured fluorescence signals to selected applications. In this context, an overview of the photoluminescence properties of molecular and nanoscale luminescence reporters will be given including a brief insight into their photophysics and fluorescence standards designed by division Biophotonics for the calibration and instrument performance validation of fluorescence measuring devices will be presented.
T2 - Analytical Academy BAM
CY - Online meeting
DA - 17.11.2020
KW - Fluorescence
KW - Quality assurance
KW - Quantification
KW - Linearity
KW - Measurement uncertainty
KW - Method
KW - Nano particle
KW - Dye
PY - 2020
AN - OPUS4-51619
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescence encoding of polymer microbeads with nanocrystals during polymerization
N2 - The Goal & Motivation
- Spherical polymer beads
- Controlled size in the low µm range
- Narrow size distribution
- Homogeneous encoding with molecular and nanoscale luminophores (dyes , QDs, platelets etc.)
- Sufficient fluorescence
- Easy, accessible procedure
T2 - GrK Nanohybrid Conference
CY - Hamburg, Germany
DA - 04.10.2022
KW - Polymerization
KW - Nanocrystals
KW - Fluorescence
KW - Microbeads
PY - 2022
AN - OPUS4-56028
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Billimoria, K.
A1 - Diaz Fernandez, Y. A.
A1 - Andresen, Elina
A1 - Sorzabal-Bellido, I.
A1 - Huelga-Suarez, G.
A1 - Bartczak, D.
A1 - Ortiz de Solórzano, C.
A1 - Resch-Genger, Ute
A1 - Goenaga Infante, H.
T1 - The potential of bioprinting for preparation of nanoparticle-based calibration standards for LA-ICP-ToF-MS quantitative imaging
N2 - This paper discusses the feasibility of a novel strategy based on the combination of bioprinting nano-doping technology and laser ablation-inductively coupled plasma time-of-flight mass spectrometry analysis for the preparation and characterization of gelatin- based multi-element calibration standards suitable for quantitative imaging. To achieve this, lanthanide up-conversion nanoparticles were added to a gelatin matrix to produce the bioprinted calibration standards. The features of this bioprinting approach were com- pared with manual cryosectioning standard preparation, in terms of throughput, between batch repeatability and elemental signal homogeneity at 5 μm spatial resolution. By using bioprinting, the between batch variability for three independent standards of the same concentration of 89 Y (range 0–600 mg/kg) was reduced to 5% compared to up to 27% for cryosectioning. On this basis, the relative standard deviation ( RSD ) obtained between three independent calibration slopes measured within 1 day also reduced from 16% (using cryosectioning ) to 5% (using bioprinting), supporting the use of a single standard preparation replicate for each of the concentrations to achieve good calibration performance using bioprinting. This helped reduce the analysis time by approximately 3-fold. With cryosectioning each standard was prepared and sectioned individually, whereas using bio-printing it was possible to have up to six different standards printed simultaneously, reducing the preparation time from approximately 2 h to under 20 min (by approxi- mately 6-fold). The bio-printed calibration standards were found stable for a period of 2 months when stored at ambient temperature and in the dark.
KW - Environmental analysis
KW - LA-ICP-MS
KW - Lanthanide
KW - Tag
KW - Fluorescence
KW - Nanoparticles
KW - Reference material
KW - Quality assurance
KW - 3D-printing
KW - Synthesis
KW - Production
KW - Multimodal
PY - 2022
DO - https://doi.org/10.1093/mtomcs/mfac088
SN - 1756-591X
VL - 14
IS - 12
SP - 1
EP - 9
PB - Oxford University Press
CY - Oxford
AN - OPUS4-57018
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescent, Semiconductor Nanoparticle-loaded Polymer Microbeads - Comparing Particle Architectures
N2 - The synthesis of luminescent polymer microparticles stained with different, including non-spherical, semiconductor nanoparticles (NPs) was developed and optimized while ensuring a good preservation of the particle photoluminescence. The aplicability of the different semiconductor NPs was determined to depend on their surface chemistry and shape. Thus, a first correlation of semiconductor NP architecture and applicability could be deduced, which has not been reported before.
T2 - 821. WE-Heraeus-Seminar
CY - Bad Honnef, Germany
DA - 12.11.2024
KW - Nanoparticle
KW - Surface chemistry
KW - Synthesis
KW - Fluorescence
KW - Luminescence
PY - 2024
AN - OPUS4-61732
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Wegner, Karl David
T1 - Luminescent Quantum dots – the next-generation nano light bulbs
N2 - Fluorescent semiconductor nanocrystals, also known as quantum dots (QDs), enabled many advancements in biotechnology, photovoltaics, photocatalysis, quantum computing and display devices. The high versatility of this nanomaterial is based on their unique size-tunable photoluminescence properties, which can be adjusted from the visible to the near-infrared range. In contrast to other nanomaterials, QDs made the transition from a laboratory curiosity to the utilization in commercial products, like the QLED television screen or in smartphone displays. The best investigated QDs are composed of heavy metals like cadmium or lead, which is not the best choice in terms of toxicity and environmental pollution. A more promising material is Indium Phosphide (InP), which is also currently used by Samsung, Sony and co. in the QLED displays.
In this contribution, I would like to give you a sneak peek behind the curtains of nanomaterial synthesis and show how this material is produced, how to stabilize their structural properties, and assess their toxicity in environmentally relevant conditions. Furthermore, I would like to present a synthesis method to accomplish the last open challenge in display technology of a blue luminescent LED based on QDs by introducing a new element to the InP QDs.
T2 - The Berlin Postdoc Day
CY - Berlin, Germany
DA - 03.11.2022
KW - InP
KW - Quantum dots
KW - Fluorescence
KW - Aging
KW - Doping
KW - Nanomaterial
KW - Cytotoxicity
PY - 2022
AN - OPUS4-56194
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Photoluminescence quantum yields of molecular & nanoscale luminophores in the UV/VIS/NIR/SWIR in dispersion and in the solid state
N2 - Photophysical and mechanistic studies, the comparison of different emitter classes, and the rational design of the next generation of molecular and nanoscale reporters require quantitative photoluminescence measurements and the reliable determination of the key performance parameter photoluminescence quantum yield (QY), i.e., the number of emitted per absorbed photons. This is of special importance for all photoluminescence applications in the life and material sciences in the UV/vis/NIR/SWIR.
T2 - MAF 2024 Conference
CY - Valencia, Spain
DA - 08.09.2024
KW - Nanoparticle
KW - Nano
KW - Luminescence
KW - Quality assurance
KW - Synthesis
KW - Standardization
KW - Reference material
KW - Quantum yield
KW - Fluorescence
KW - Reference data
KW - Integrating sphere spectroscopy
KW - ILC
KW - Converter material
PY - 2024
AN - OPUS4-61072
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Pauli, J.
A1 - Güttler, Arne
A1 - Schneider, T.
A1 - Würth, Christian
A1 - Resch-Genger, Ute
T1 - Fluorescence Quantum Yield Standards for the UV/Visible/NIR: Development, Traceable Characterization, and Certification
N2 - The rational design of next generation molecular and nanoscale reporters and the comparison of different emitter classes require the determination of the fluorometric key performance parameter fluorescence quantum yield (Φf), i.e., the number of emitted photons per number of absorbed photons. Main prerequisites for reliable Φf measurements, which are for transparent luminophore solutions commonly done relative to a reference, i.e., a fluorescence quantum yield standard of known Φf, are reliable and validated instrument calibration procedures to consider wavelength-, polarization-, and time-dependent instrument specific signal contributions, and sufficiently well characterized fluorescence quantum yield standards. As the standard’s Φf value directly contributes to the calculation of the sample’s Φf, its accuracy presents one of the main sources of uncertainty of relative Φf measurements. To close this gap, we developed a first set of 12 fluorescence quantum yield standards, which absorb and emit in the wavelength region of 330−1000 nm and absolutely determined their Φf values with two independently calibrated integrating sphere setups.
Criteria for standard selection and the configuration of these novel fluorescence reference materials are given, and the certification procedure is presented including homogeneity and stability studies and the calculation of complete uncertainty budgets for the certified Φf values. The ultimate goal is to provide the community of fluorescence users with available reference materials as a basis for an improved comparability and reliability of quantum yield data since the measurement of this spectroscopic key property is an essential part of the characterization of any new emitter.
KW - Optical spectroscopy
KW - Traceability
KW - Reference product
KW - Dye
KW - Fluorescence
KW - Quantum yield
KW - Reference material
KW - Reference data
KW - Certification
KW - Quality assurance
PY - 2023
DO - https://doi.org/10.1021/acs.analchem.2c05530
VL - 95
SP - 5671
EP - 5677
PB - American Chemical Society
AN - OPUS4-58151
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tavernaro, Isabella
T1 - Development of amorphous silica particle based reference materials for surface functional group quantification
N2 - Functionalized nanomaterials (NM) with their unique size-dependent properties are of increasing relevance for current and future developments in various fields such as medical and pharmaceutical industry, computing, electronics or food and consumer products. The performance and safety of NM are determined by the sum of their intrinsic physicochemical properties.1 Besides other key parameters, the particle surface chemistry, which is largely controlled by the chemical nature and density of functional groups and ligands, must be considered for a better performance, stability, and processibility of NM, as well as their interaction with the environment. Thus, particle standards with well-designed surfaces and methods for functional group quantification can foster the sustainable development of functional and safe(r) NM.2 Here we provide a brief overview of the ongoing research in division Biophotonics to design tailored amorphous silica reference particles with bioanalytically relevant functional groups and ligands, for the development of standardized and validated surface functional group quantification methods.
T2 - Workshop NanoRiskSD project
CY - Berlin, Germany
DA - 09.06.2022
KW - Nanoparticle
KW - Surface analysis
KW - Silica
KW - Fluorescence
KW - Assay
PY - 2022
AN - OPUS4-55004
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tavernaro, Isabella
T1 - Rational Design of Analyte-responsive Fluorescent Particle Sensors for Life Sciences Applications
N2 - Engineered and tailor-made nanomaterials (NM) are of increasing relevance for current and future developments in the life and material sciences for applications, e.g., as drug carriers, fluorescent sensors, and multimodal labels in bioanalytical assays, and reporters for imaging applications. For instance, NM-based reporters and sensors, that are labelled or stained with a multitude of conventional or sensor dyes, have several advantages as compared to molecular probes like enhanced brightness, i.e., amplified signals, ease of designing ratiometric systems by combining analyte-sensitive and inert reference dyes, and increased photostability. Moreover, this can enable the use of hydrophobic dyes in aqueous environments. For rational NM design, choosing and tailoring the intrinsic physicochemical properties, such as particle size, size distribution, morphology, and surface chemistry of the NM application-specific considerations like biocompatibility, ease and low cost of preparation, and colloidal stability and performance in the targeted environment must be considered. In this lecture, different design concepts of inorganic, organic, and hybrid NM and microparticles with hydrophilic surface chemistries and different functionalities are presented that can be used for the targeting of lysosomes; and to monitor functional parameters of endo-lysosomal compartments, like pH or enable oxygen sensing.
T2 - Chemical Probes for Lysosomal Biology
CY - York, United Kingdom
DA - 09.09.2024
KW - Luminescence
KW - Quantification
KW - Nano
KW - Particle
KW - Quality assurance
KW - Fluorescence
KW - Method
KW - Uncertainty
KW - Reference material
KW - Sensor
KW - Synthesis
KW - Dye
KW - pH
KW - Silica
KW - Polystyrene
KW - Surface analysis
PY - 2024
AN - OPUS4-62173
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - GEN
A1 - Scholtz, Lena
A1 - Resch-Genger, Ute
T1 - Behind the Paper - Dual color pH probes made from silica and polystyrene nanoparticles and their performance in cell studies
N2 - In this contribution we highlight the importance of comparison for scientific research while developing a new, functional pH sensor system, and the valuable insights this can provide.
KW - Dye
KW - Optical Spectroscopy
KW - pH probe
KW - Silica and Polystyrene Particles
KW - Nano
KW - Surface groups
KW - Safe-by-Design
KW - Cell studies
KW - Sensors
KW - Particle Synthesis
KW - Fluorescence
PY - 2023
UR - https://communities.springernature.com/posts/dual-color-ph-probes-made-from-silica-and-polystyrene-nanoparticles-and-their-performance-in-cell-studies
SP - 1
EP - 2
PB - Springer Nature
CY - London
AN - OPUS4-59150
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
A1 - Pauli, J.
A1 - Güttler, Arne
A1 - Richter, Maria
A1 - Fiedler, Saskia
A1 - Frenzel, Florian
A1 - Wegner, Karl David
A1 - Würth, Christian
T1 - Photoluminescence Quantum Yields of Luminescent Nanocrystals and Particles in the UV/vis/NIR/SWIR
N2 - The rational design of functional luminescent materials such as semiconductor quantum dots and lanthanide-based upconversion nanoparticles, all photophysical and mechanistic studies, and the comparison of different emitters require accurate and quantitative photoluminescence measurements. Particularly the reliable determination of the key performance parameter photoluminescence quantum yield (f), the number of emitted per absorbed photons, and the brightness are of special importance for luminescence applications in the life and material sciences and nano(bio)photonics.[1] In this context, examples for absolute measurements of the photoluminescence quantum yields of UV/vis/NIR/SWIR emissive semiconductor quantum dots and rods, made from different materials, and spectrally shifting lanthanide upconversion nanocrystals with different surface chemistries in transparent matrices are presented including excitation wavelength and power density dependent studies utilizing integration sphere spectroscopy.[2,3] In addition, procedures for the absolute determination of the photoluminescence quantum yields of scattering dispersions of larger size quantum rods and differently sized inorganic particles have been developed as well as procedures for the characterization of solid luminescent nanomaterials such as different perovskites and YAG:Cer converter materials.[4] Thereby, challenges and pitfalls of f measurements in different wavelength regions including the SWIR and material-specific effects related to certain emitter classes are addressed, achievable uncertainties are quantified, and relative and absolute measurements of photoluminescence quantum yield measurements are compared to underline limitations of the former approach. Finally, a set of novel UV/vis/NIR quantum yield standards is presented including their certification with a complete uncertainty budget.[5]
T2 - NANAX 10
CY - Klosterneuburg, Austria
DA - 03.07.2023
KW - Fluorescence
KW - Optical spectroscopy
KW - Reference data
KW - Traceability
KW - NIR
KW - Scattering
KW - Reference material
KW - Certification
KW - Quality assurance
KW - Dye
KW - Reference product
KW - SWIR
KW - Nano
KW - Particle
KW - Perovskite
KW - Integrating sphere spectroscopy
KW - Quantum yield
PY - 2023
AN - OPUS4-58238
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescent Polymer Microbeads – Synthesis & Applications
N2 - Differently sized, luminescent polymer beads encoded with QDs were prepared with a simple, optimized polymerization procedure. The optical
properties of the resulting particles were studied to ensure sufficient fluorescence. In addition, possible future applications were identified.
T2 - Future WiNS: New Energies for a Sustainable World
CY - Berlin, Germany
DA - 07.12.2022
KW - Polymerization
KW - Quantum dots
KW - Fluorescence
KW - Luminescence
PY - 2022
AN - OPUS4-56560
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescent polymer microbeads - Why and how?
N2 - Pitch Talk about the synthesis and applications of polymer microbeads encoded with (luminescent) nanoparticles.
T2 - JCF Frühjahrssymposium 2023
CY - Gießen, Germany
DA - 21.03.2023
KW - Fluorescence
KW - Microbeads
KW - Nanocrystals
KW - Polymerization
PY - 2023
AN - OPUS4-57260
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Srivastava, Priyanka
T1 - Multi-color nanosensors for ratiometric measurements of acidic, neutral, and basic pH based on silica and polystyrene particles
N2 - pH presents one of the most important analytes in the life and material sciences, indicating, e.g., diseases and corrosion processes. This includes the optical monitoring of pH in living cells for studying cellular internalization pathways, such as phagocytosis, endocytosis, and receptor mediated internalization with the aid of molecular and nanoscale fluorescent sensors. Nanoparticle (NP)-based sensors, that are labelled or stained with a multitude of sensor dyes, have several advantages as compared to conventional molecular probes like enhanced brightness, i.e., amplified signals, ease of designing ratiometric systems by combining analyte-sensitive and inert reference dyes, and increased photostability. Moreover, this can enable the use of hydrophobic dyes in aqueous environments. Versatile templates and carriers for the fabrication of nanosensors by staining and/or labelling with different fluorophores and sensor molecules are surface-functionalized particles like silica (SiO2) and polystyrene (PS) particles. Here we present a platform of blue-red-green fluorescent pH nanosensors for the measurement of acidic, neutral, and basic pH utilizing both types of matrices and two spectrally distinguishable sensor dyes with an integrated reference dye and demonstrate its applicability for cellular studies.
T2 - E-MRS Spring Meeting 2022
CY - Online meeting
DA - 30.05.2022
KW - Nanosensors
KW - pH sensing
KW - Silica- and polystyrene particles
KW - Ratiometric sensors
KW - Fluorescence
PY - 2022
AN - OPUS4-55597
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wen, Keqing
A1 - Gorbushina, Anna
A1 - Schwibbert, Karin
A1 - Bell, Jérémy
T1 - Microfluidic platform with precisely controlled hydrodynamic parameters and integrated features for generation of microvortices to accurately form and monitor biofilms in flow
N2 - Microorganisms often live in habitats characterized by fluid flow, and their adhesion to surfaces in industrial systems or clinical settings may lead to pipe clogging, microbially influenced corrosion, material deterioration, food spoilage, infections, and human illness. Here, a novel microfluidic platform was developed to investigate biofilm formation under precisely controlled (i) cell concentration, (ii) temperature, and (iii) flow conditions. The developed platform central unit is a single-channel microfluidic flow cell designed to ensure ultrahomogeneous flow and condition in its central area, where features, e.g., with trapping properties, can be incorporated. In comparison to static and macroflow chamber assays for biofilm studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes and have better environment control and smaller sample requirements. Flow simulations and experiments with fluorescent particles were used to simulate bacteria flow in the platform cell for calculating flow velocity and direction at the microscale level. The combination of flow analysis and fluorescent strain injection in the cell showed that microtraps placed at the center of the channel were efficient in capturing bacteria at determined positions and to study how flow conditions, especially microvortices, can affect biofilm formation. The microfluidic platform exhibited improved performances in terms of homogeneity and robustness for in vitro biofilm formation. We anticipate the presented platform to be suitable for broad, versatile, and high-throughput biofilm studies at the microscale level.
KW - Topographical pattern
KW - E. coli
KW - Fluorescence
KW - Bacteria trapping
KW - Particle velocimetry
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-610450
DO - https://doi.org/10.1021/acsbiomaterials.4c00101
SN - 2373-9878
VL - 10
IS - 7
SP - 4626
EP - 4634
PB - ACS Publ.
CY - Washington, DC
AN - OPUS4-61045
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sun, Yijuan
A1 - Pérez-Padilla, Víctor
A1 - Valderrey, Virginia
A1 - Bell, Jérémy
A1 - Gawlitza, Kornelia
A1 - Rurack, Knut
T1 - Ratiometric detection of perfluoroalkyl carboxylic acids using dual fluorescent nanoparticles and a miniaturised microfluidic platform
N2 - The widespread contamination of soil and water with perfluoroalkyl substances (PFAS) has caused considerable societal and scientific concern. Legislative measures and an increased need for remediation require effective on-site analytical methods for PFAS management. Here we report on the development of a green-fluorescent guanidine-BODIPY indicator monomer incorporated into a molecularly imprinted polymer (MIP) for the selective detection of perfluorooctanoic acid (PFOA). Complexation of PFOA by the indicator, which is mediated by concerted protonation-induced ion pairing-assisted hydrogen bonding, significantly enhances fluorescence in polar organic solvents. The MIP forms as a thin layer on silica nanoparticles doped with tris(bipyridine)ruthenium(II) chloride, which provides an orange emission signal as internal reference, resulting in low measurement uncertainties. Using a liquid-liquid extraction protocol, this assay enables the direct detection of PFOA in environmental water samples and achieves a detection limit of 0.11 µM. Integration into an opto-microfluidic system enables a compact and user-friendly system for detecting PFOA in less than 15 minutes.
KW - PFAS
KW - Molecular imprinting
KW - Microfluidics
KW - Fluorescence
KW - Onsite assay
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650270
DO - https://doi.org/10.1038/s41467-025-66872-9
SN - 2041-1723
VL - 16
IS - 1
SP - 1
EP - 16
PB - Springer Science and Business Media LLC
AN - OPUS4-65027
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Oskoei, Párástu
A1 - Afonso, Rúben
A1 - Bastos, Verónica
A1 - Nogueira, João
A1 - Keller, Lisa-Marie
A1 - Andresen, Elina
A1 - Saleh, Maysoon I.
A1 - Rühle, Bastian
A1 - Resch-Genger, Ute
A1 - Daniel-da-Silva, Ana L.
A1 - Oliveira, Helena
T1 - Upconversion Nanoparticles with Mesoporous Silica Coatings for Doxorubicin Targeted Delivery to Melanoma Cells
N2 - Melanoma is one of the most aggressive skin cancers and requires innovative therapeutic strategies to overcome the limitations of conventional therapies. In this work, upconversion nanoparticles coated with mesoporous silica and functionalized with folic acid (UCNP@mSiO2-FA) were developed as a targeted nanocarrier system for the delivery of doxorubicin (DOX). The UCNPs were synthesized via thermal decomposition, coated with mesoporous silica shells, and functionalized with folic acid (FA) to enable receptor-mediated targeting. DOX was then loaded into the mesoporous silica coating by adsorption, yielding UCNP@mSiO2-FA-DOX. The different UCNPs were characterized for size, composition, colloidal stability, and loading and release of DOX. This comprehensive physicochemical characterization confirmed a high DOX loading efficiency and a slightly increased drug release under acidic conditions, mimicking the tumour microenvironment. In vitro assays using four melanoma cell lines (A375, B16-F10, MNT-1, and SK-MEL-28) revealed an excellent biocompatibility of UCNP@mSiO2-FA and a significantly higher cytotoxicity of UCNP@mSiO2-FA-DOX compared to unloaded UCNPs, in a dose-dependent manner. Cell cycle analysis demonstrated G2/M phase arrest after treatment with UCNP@mSiO2-FA-DOX, confirming its antiproliferative effect. Overall, UCNP@mSiO2-FA-DOX represents a promising nanoplatform for targeted melanoma therapy, combining active tumour targeting and enhanced anticancer efficacy.
KW - Fluorescence
KW - Synthesis
KW - Nano
KW - Particle
KW - Silica
KW - Cell
KW - Uptake
KW - Drug
KW - Characterization
KW - DOX
KW - Imaging
KW - Toxicity
KW - Release
KW - pH
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653596
DO - https://doi.org/10.3390/molecules31010074
SN - 1420-3049
VL - 31
IS - 1
SP - 1
EP - 18
PB - MDPI AG
AN - OPUS4-65359
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Wen, Keqing
A1 - Gorbushina, Anna
A1 - Schwibbert, Karin
A1 - Bell, Jérémy
T1 - A microfluidic platform for monitoring biofilm formation in flow under defined hydrodynamic conditions
N2 - Bacterial adhesion on surfaces of medical, water and food applications may lead to infections, water or food spoilage and human illness. In comparison to traditional static and macro flow chamber assays for biofilm formation studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes, have better environment control and smaller sample requirements.
In this work, a novel microfluidic platform is developed to investigate biofilm adhesion under precisely controlled bacteria concentration, temperature, and flow conditions. This platform central unit is a single-inlet microfluidic flow cell with a 5 mm wide chamber designed and tested to achieve ultra-homogenous flow in the central area of chamber. Within this area, defined microstructures are integrated that will disturb the homogeneity of the flow, thus changing bacterial adhesion pattern.
Here we present the monitoring of bacterial biofilm formation in a microfluidic chip equipped with a microstructure known as micro-trap. This feature is based on a 3D bacteria trap designed by Di Giacomo et al. and successfully used to sequester motile bacteria.
At first, fluorescent particles similar in size to Escherichia coli (E. coli) are used to simulate bacteria flow inside the flow cell and at the micro-trap. The turbulences induced by the trap are analyzed by imaging and particle tracking velocimetry (PTV). Secondly, the model strain E. coli TG1, ideal and well described for biofilm studies, is used to analyze biofilm formation in the micro-trap. Therefore, a stable fluorescent strain E. coli TG1-MRE-Tn7-141 is constructed by using Tn7 transposon mutagenesis according to the method described by Schlechter et al. Sequestering of E. coli cells within the micro-trap was followed using epifluorescence microscopy.
The novel microfluidic platform shows great potential for assessment of bacterial adhesion under various flow regimes. The performance of structural feature with respect to the generation of turbulences that promote or reduce bacterial adhesion can be systematically examined.
The combination of flow analysis and fluorescent strain injection into the microfluidic chip shows that the micro-trap is useful for capturing bacteria at defined positions and to study how flow conditions, especially micro-turbulences, can affect biofilm formation. It represents a powerful and versatile tool for studying the relation between topography and bacteria adhesion.
T2 - International Conference on Miniaturized Systems for Chemistry and Life Sciences
CY - Katowice, Poland
DA - 15.10.2023
KW - Biofilm
KW - E. coli
KW - Microfluidics
KW - Velocimetry
KW - Fluorescence
PY - 2023
AN - OPUS4-59593
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -