TY - CONF A1 - Wöhlecke, Andreas T1 - Aktuelles aus dem BAM-Fachbeirat N2 - Die Anforderungen an Geokunststoffprodukte und deren Qualitätssicherung unterliegen einem stetigen Wandel, der sowohl durch technische Veränderungen als auch durch normative und organisatorische Entwicklungen geprägt ist. Insbesondere der Fachbeirat der BAM gemäß Deponieverordnung (DepV) spielt hier im Bereich der Deponietechnik eine wichtige Rolle. An dieser Stelle sollen aktuelle Themen aus dem Fachbeirat der BAM vorgestellt werden, die wesentliche Änderungen in der Zulassungs- und Anwendungspraxis betreffen. Der Beitrag beleuchtet unter anderem Veränderungen innerhalb der BAM, die Modernisierung der Publikationsformate sowie die fachliche Weiterentwicklung der Zulassungsrichtlinien. T2 - 22. Leipziger Deponiefachtagung CY - Leipzig, Germany DA - 10.03.2026 KW - Deponie KW - Geotextil KW - Abdichtungssystem PY - 2026 AN - OPUS4-65665 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Diehn, S. A1 - Zimmermann, B. A1 - Tafintseva, V. A1 - Seifert, S. A1 - Bagcioglu, M. A1 - Ohlson, M. A1 - Weidner, Steffen A1 - Fjellheim, S. A1 - Kohler, A. A1 - Kneipp, Janina T1 - Combining Chemical Information From Grass Pollen in Multimodal Characterization N2 - The analysis of pollen chemical composition is important to many fields, including agriculture, plant physiology, ecology, allergology, and climate studies. Here, the potential of a combination of different spectroscopic and spectrometric methods regarding the characterization of small biochemical differences between pollen samples was evaluated using multivariate statistical approaches. Pollen samples, collected from three populations of the grass Poa alpina, were analyzed using Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, surface enhanced Raman scattering (SERS), and matrix assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS). The variation in the sample set can be described in a hierarchical framework comprising three populations of the same grass species and four different growth conditions of the parent plants for each of the populations. Therefore, the data set can work here as a model system to evaluate the classification and characterization ability of the different spectroscopic and spectrometric methods. ANOVA Simultaneous Component Analysis (ASCA) was applied to achieve a separation of different sources of variance in the complex sample set. Since the chosen methods and sample preparations probe different parts and/or molecular constituents of the pollen grains, complementary information about the chemical composition of the pollen can be obtained. By using consensus principal component analysis (CPCA), data from the different methods are linked together. This enables an investigation of the underlying global information, since complementary chemical data are combined. The molecular information from four spectroscopies was combined with phenotypical information gathered from the parent plants, thereby helping to potentially link pollen chemistry to other biotic and abiotic parameters. KW - Pollen KW - MALDI-TOF MS KW - FTIR KW - Raman KW - Multivariate analyses PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-504822 DO - https://doi.org/10.3389/fpls.2019.01788 VL - 10 SP - 1788 AN - OPUS4-50482 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H. R. A1 - Weidner, Steffen T1 - Polymerization of L-lactide with SnCl2: A Low Toxic and Eco-friendly Catalyst N2 - Polymerizations of L-lactide catalyzed either by neat SnCl2 or by SnCl2 + difunctional cocatalysts were conducted in bulk at 180, 160 and 140 °C with variation of the Lac/Cat ratio and time. With neat SnCl2 poly(L-lactide) having weight average molecular weights (uncorrected Mw’s) up to 190 000 g mol−1 were obtained mainly consisting of linear chains. Addition of salicylic acid or 1,1-bisphenol yielded a higher fraction of cyclic polylactides but lower molecular weights. Furthermore, SnCl2 was compared with Bu2SnCl2 and various other metal chlorides and the best results were obtained with SnCl2. With ethyl L-lactate as initiator SnCl2-catalyzed ROPs were performed at 120 °C and the lac/initiator ratio was varied. All these experiments were conducted under conditions allowing for comparison with ROPs catalyzed with neat Sn(II)-2-ethyhexanoate. Such a comparison was also performed with ε-caprolactone as monomer. KW - Catalyst KW - Polylactide KW - MALDI-TOF MS KW - Polycondensation PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-520517 DO - https://doi.org/10.1007/s10924-020-02042-w SN - 1566-2543 SP - 1 EP - 13 PB - Springer Nature AN - OPUS4-52051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dudziak, Mateusz A1 - Bhatia, Riya A1 - Dey, R. A1 - Falkenhagen, Jana A1 - Ullrich, M. S. A1 - Thomsen, C. A1 - Schartel, Bernhard T1 - Wastewater phosphorus enriched algae as a sustainable flame retardant in polylactide N2 - Revolutionizing our polymer industry for adaption to a sustainable carbon circular economy has become one of today’s most demanding challenges. Exploiting renewable resources to replace fossil-fuel—based plastics with biopolymers such as poly(lactic acid) (PLA) is inevitable while using waste streams as a raw material resource at least is promising. When it comes to using PLA as technical polymer, its high flammability must be addressed by flame retardants compatible with the thermoplastic processing of PLA and its compostability. This study proposes microalgae enriched with phosphorus from wastewater (P-Algae) as an elegant way towards a kind of sustainable organophosphorus flame retardant. The concept is demonstrated by investigating the processing, pyrolysis, flammability, and fire behavior of PLA/P-Algae, while varying the P-Algae content and comparing P-Algae with four alternative bio-fillers (phosphorylated lignin, biochar, thermally treated sewage sludge, and metal phytate) with different P-contents as meaningful benchmarks. KW - PLA KW - Flame Retardancy KW - Phosphorylated Algae KW - Wastewater flame retardants KW - Zink phytate KW - Phosphorylated lignin KW - Thermally treated sludge PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-604150 DO - https://doi.org/10.1016/j.polymdegradstab.2024.110885 SN - 1873-2321 SN - 0141-3910 VL - 227 SP - 1 EP - 11 PB - Elsevier Ltd. AN - OPUS4-60415 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cherbib, S. A1 - Jlalia, I. A1 - Chabbah, T. A1 - Chatti, S. A1 - Marestin, C. A1 - Mercier, R. A1 - Weidner, Steffen A1 - Casabianca, H. A1 - Jaffrezic-Renault, N. A1 - Abderrazak, H. T1 - Design of New Partially Bio-Based Polyguanamines for the Reversible Adsorption of Phenolic Molecules from Olive Mill Wastes N2 - Olive mill wastewater produces a variety of potent antioxidants, including hydroxytyrosol, oleuropein, and tyrosol, that have been widely used in agriculture, pharmacy, and cosmetics. This study aims to design new poly(guanamine)s phases by polycondensation of modified triazine monomers with both petro-based and biosourced diamines, to act as stationary phases for the uptake of these phenolic molecules. Obtained polymers were characterized by NMR spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The adsorption results showed that the newly synthesized polymers can effectively uptake the less polar phenolic compounds, ferulic acid, and caffeic acid. The isosorbide-based polymer (P6) presented the highest sorption efficiency, due to the hydrophilic properties of isosorbide associated with the proton affinity of the triazine groups. All the phenolic compounds were successfully desorbed from the P6 polymer using a minimal amount of a methanol/acetonitrile mixture. P6 polymer could be used for four successive adsorption processes without loss of efficiency. KW - Olive mill wastewater KW - Triazine KW - Isosorbide KW - Adsorption KW - Phenolic compounds PY - 2024 DO - https://doi.org/10.1007/s42250-024-01081-3 SN - 2522-5758 SP - 1 EP - 11 PB - Springer Science and Business Media LLC AN - OPUS4-61348 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Falkenhagen, Jana T1 - Combined impact of UV radiation and nitric acid on high‐density polyethylene containers as a laboratory test N2 - In a laboratory test, transparent high‐density polyethylene (HDPE) jerrycans have been exposed to both UV radiation and 55 wt‐% nitric acid solution at (41 ± 2)°C, for up to 20 days. For comparison, UV radiant exposure (21 days) and nitric acid exposure (up to 6 weeks) were performed separately, at nearly equal temperatures. The damages are compared with FTIR spectroscopy in ATR and HT‐gel permeation chromatography(GPC) on a molecular level and with hydraulic internal pressure testing as a component test. For the used jerrycans, relevant oxidation can only be found after the combined exposure. This is caused by the decomposition of nitric acid into nitrous gases by UV radiation, which is also observed at lower concentrations (28 wt‐%). After 6 days of laboratory exposure, this is rated as critical, which corresponds to about 1/10 year in Central Europe, according to the UV radiant exposure. The gradual increase in oxidative damage shows the reproducibility of the test. KW - Molecular mass distribution KW - High-density polyethylene KW - Nitric acid KW - UV radiation PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550141 DO - https://doi.org/10.1002/pts.2673 SN - 0894-3214 VL - 35 IS - 10 SP - 729 EP - 735 PB - Wiley CY - New York, NY AN - OPUS4-55014 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, Hans. R. A1 - Weidner, Steffen T1 - About the Toxicity of Polymerization Catalysts and Polymer Additives Based on Tin(II) Salts and Tin(IV) Compounds N2 - This article reviews and discusses information on the toxicity of numerous tin-based catalysts used in academic research and industrial production for the synthesis of various polymers, such as polyesters, polyurethanes, and polysiloxanes. Tin(IV) compounds used as additives and as PVC stabilizers are also considered. Emphasis is put on the differentiation between tin(II) salts on the one hand and tin(IV) compounds on the other hand. In the first chapter, historical facts about human contact with stannous ions are discussed, along with toxicity studies of canned foods and beverages. In the second part, toxicity tests based on cell cultures and medical applications of tin(II)-containing films or implants are described. The third part focuses on alkyl and aryl tin(IV) compounds. KW - Tin KW - Toxicity KW - Environment KW - Polymer catalysts KW - Polymer additives PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-642877 DO - https://doi.org/10.1021/acs.chas.5c00105 SN - 1871-5532 SP - 1 EP - 13 PB - American Chemical Society (ACS) AN - OPUS4-64287 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fink, Friedrich A1 - Stawski, Tomasz M. A1 - Emmerling, Franziska A1 - Falkenhagen, Jana T1 - A novel machine-learning approach to unlock technical lignin classification by NIR spectroscopy - bench to handheld N2 - In this research, the utilization of near-infrared (NIR) spectroscopy in conjunction with advanced machine learning methods is investigated for categorizing technical lignins obtained from different biomass sources and industrial procedures. Technical lignins, such as kraft, organosolv and lignosulfonates, have different chemical compositions, which continue to make uniform characterization and application in sustainable sectors extremely difficult. Fast, universally accessible analytics combined with data analysis is still an open question. For the first time three distinct NIR spectrometers—a high-performance benchtop system, a mid-priced compact device, and an economical handheld unit—were utilized to record NIR spectra of 31 unique lignin samples. The spectra underwent pre-processing through standard normal variate (SNV) transformation and Savitzky-Golay derivatives to amplify spectral features and decrease noise. Principal component analysis (PCA) was employed to reduce data complexity and extract crucial characteristics for classification purposes. Subsequently, four machine learning algorithms—Support Vector Machines (SVM), Gaussian Naive Bayes (GNB), Gaussian Process Classification (GPC), and Decision Tree Classification (DTC)—were implemented for the classification of the lignin samples. The DTC model exhibited the highest accuracy among them across different spectrometers. Although the benchtop spectrometer produced the most precise outcomes, the compact NeoSpectra system also displayed potential as a cost-efficient option. Nonetheless, the restricted spectral coverage of the handheld NIRONE spectrometer resulted in reduced classification accuracy. Our discoveries highlight the capability of NIR spectroscopy, combined with robust data analysis techniques, for the swift and non-destructive classification of technical lignins, facilitating their improved utilization in sustainable fields. KW - Technical lignins KW - NIR spectroscopy KW - Classification KW - Machine-learning KW - PCA PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634518 DO - https://doi.org/10.1016/j.chemolab.2025.105467 SN - 0169-7439 VL - 264 SP - 1 EP - 10 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-63451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stolar, Tomislav A1 - Bayram, Dilara A1 - May, Anastasia A1 - Sundermann, Remie A1 - Prinz, Carsten A1 - Meyer, Klas A1 - Myxa, Anett A1 - Falkenhagen, Jana A1 - Emmerling, Franziska T1 - Selective mechanochemical conversion of post-consumer polyethylene terephthalate waste into hcp and fcu UiO-66 metal–organic frameworks N2 - Single-use plastics strongly contribute to plastic pollution, and less than 10% of plastic waste is recycled globally. Here, we present a selective mechanochemical protocol for converting post-consumer polyethylene terephthalate (PET) transparent bottles and coloured textile waste into the porous metal–organic framework (MOF) UiO-66 materials. We used time-resolved in situ (TRIS) synchrotron powder X-ray diffraction and Raman spectroscopy to monitor the depolymerization of PET during ball milling. To convert disodium terephthalate to UiO-66, we developed base and base-free synthetic routes that lead to fcu and hcp UiO-66 phases, respectively, including the first ever synthesis of hcp UiO-66 by mechanochemistry. Our results demonstrate the potential of mechanochemistry to selectively access fcu and hcp UiO-66 phases using post-consumer PET waste. KW - Mechanochemistry PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653958 DO - https://doi.org/10.1039/D4MR00126E SN - 2976-8683 SP - 1 EP - 8 PB - Royal Society of Chemistry (RSC) AN - OPUS4-65395 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Falkenhagen, Jana A1 - Beskers, Timo. F. A1 - Myxa, Anett A1 - Pursch, Matthias T1 - Round-robin test for size exclusion chromatography – Data summary N2 - Size exclusion chromatography (SEC or GPC) is one critical component of polymer analysis to meet the increasing requirements in regulatory context – namely, determination of Mn, as well as oligomers of less than 500 g mol-1 and 1000 g mol-1. The underlying test methods (OECD 118/119 and DIN EN ISO 13885 1 to 3) provide a framework for SEC measurements; however, they lack sufficient specificity to obtain accurate results. Previous SEC round robin tests were mostly performed on homopolymers and did not collect data on oligomer contents. A new round robin test was initiated and conceptualized within the Task force “Method Evaluation for Polymer REACh (MeEP)”, an initiative of “Industrieforum Analytik” within the German Chemical Society (GDCh). Samples for this study were selected to represent both easy benchmark polymers as well as real-life, industry-relevant polymer materials. Data collection focused on the regulatory requirements. Distribution of samples, gathering of individual results and evaluation were carried out by BAM. A data summary as initial result is reported here. Further evaluation and interpretation are a part of ongoing research. KW - Size exclusion chromatography KW - Polymers KW - Oligomer content KW - Round-robin test PY - 2026 DO - https://doi.org/10.26272/opus4-65587 SP - 1 EP - 84 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-65587 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stolar, Tomislav T1 - Mechanochemical conversion of polyethylene terephthalate into valuable metal-organic frameworks N2 - Single-use plastics are causing plastic pollution, and less than 10% of plastic waste is recycled globally. Here, we present a sustainable mechanochemical1 protocol for converting post-consumer polyethylene terephthalate (PET) textile and bottles into the porous metal-organic framework (MOF) UiO-66. We used time-resolved in situ synchrotron powder X-ray diffraction and Raman spectroscopy to monitor the depolymerization of PET during ball milling with sodium and potassium hydroxide and water as a liquid additive (Figure 1). For synthesizing UiO-66, we focused on the better performing sodium hydroxide and optimized two distinct synthetic routes to produce high-quality UiO-66. Our results demonstrate the potential of mechanochemistry to enable more circular MOF synthesis using post-consumer PET waste. T2 - The International Symposium on Mechanochemistry (Mech’cheM) 2025: New forces in Mechanochemistry CY - Montpellier, France DA - 04.06.2025 KW - Mechanochemistry KW - Plastic recycling KW - Circular economy PY - 2025 AN - OPUS4-63943 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Challenges of SEC and the necessity of round robin tests N2 - Size exclusion chromatography (SEC) is still the method of choice for determining the molar mass and molar mass distribution of macromolecules. It is a liquid chromatographic technique that separates molecules based on their size, respectively their hydrodynamic volume using a porous stationary phase that allows smaller molecules to pass through the pores while excluding larger molecules. The chromatogram from the size separation can be calibrated using polymers of known molar mass resulting in a relative molar mass distribution curve. From this distribution curve molar mass averages and the oligomer content (percentage of peak area smaller than 1000 g/mol and 500 g/mol) of polymers can be derived. The determination of oligomer content is important, because it is often used in regulatory contexts as a measure of small, mobile and potentially more toxic parts of the polymer. Polymer regulations are of increasing political and societal importance. Regulations often strive for narrow limits. But SEC has rather large error margins of 10-20% for the molar mass determination performed in different laboratories or on different instruments. These variances are well known to all experts and users and have been investigated in several round robin tests in the past. These resulted in DIN and ISO standards which, in our opinion, no longer meet today's requirements. Gaps have been identified that require further harmonization. Different polymer types or classes require different methods. On the other hand, as far as we know, the margins of error in determining oligomer content have not yet been investigated. It is expected that the variation will be rather high. This is because it depends on many factors related to the experimental conditions (column sets used, solvent, temperatures, sample preparation) on the one hand, and the data evaluation mechanisms (choice of baseline and peak limits) on the other. In order to actually measure the error margins and to support this with actual data a round robin test has been performed from June to November 2024 with approx. 40 participating laboratories. Three different solvents were selected, namely THF, DMAc or DMF and water. The samples were selected taking into account a wide range of practical aspects far from narrowly distributed standards: e.g higher distribution range, reduced solubility, included side components, copolymers and dispersions with gel content. In this contribution we will present the detailed concept of this round robin test and first impressions. T2 - 11th International Symposium on the Separation and Characterization of Natural and Synthetic Macromolecules CY - Amsterdam, Netherlands DA - 21.01.2025 KW - Size exclusion chromatography KW - Round robin tests PY - 2025 AN - OPUS4-62533 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Error margins in the Determination of Molar Mass and Oligomer Content of Polymers N2 - Size exclusion chromatography (SEC) is still the method of choice for determining the molar mass and molar mass distribution of macromolecules. It is a liquid chromatographic technique that separates molecules based on their size, respectively their hydrodynamic volume using a porous stationary phase that allows smaller molecules to pass through the pores while excluding larger molecules. The chromatogram from the size separation can be calibrated using polymers of known molar mass resulting in a relative molar mass distribution curve. From this distribution curve molar mass averages and the oligomer content (percentage of peak area smaller than 1000 g/mol and 500 g/mol) of polymers can be derived. The determination of oligomer content is important, because it is often used in regulatory contexts as a measure of small, mobile and potentially more toxic parts of the polymer. Polymer regulations are of increasing political and social importance. Regulations often set very narrow limits. SEC has rather large error margins of 10-20% for the molar mass determination performed in different laboratories or on different instruments. These variances are well known to all experts and users and have been investigated in several round robin tests in the past. These resulted in DIN and ISO standards which, in our opinion, no longer meet today's requirements. As far as we know, the margins of error in determining oligomer content have not yet been investigated. It is expected that the variation will be rather high. This is because it depends on many factors related to the experimental conditions (column sets used, solvent, temperatures, sample preparation) on the one hand, and the data evaluation mechanisms (choice of baseline and peak limits) on the other. In order to actually measure the error margins and to support this with actual data a round robin test has been performed from June to November 2024 with approx. 40 participating laboratories. Three different solvents were selected, namely THF, DMAc or DMF and water. The samples were selected together with all the experts, taking into account a wide range of practical aspects far from narrowly distributed standards: e.g higher distribution range, reduced solubility, included side components, copolymers and dispersions with gel content. In this contribution we will present the detailed concept of this round robin test and first results. T2 - SETAC Europe 35th Annual Meeting CY - Vienna, Austria DA - 11.05.2025 KW - Size exclusion chromatography KW - REACH KW - Polymers KW - Round Robin Tests PY - 2025 AN - OPUS4-63307 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falkenhagen, Jana T1 - Limitations of SEC: Strategies for Improved Regulatory Polymer Analysis N2 - Polymers, composed of repeating units called monomers, exhibit a diverse range of properties, with molecular weight distribution (MWD) being particularly important for regulatory risk assessments. Size exclusion chromatography (SEC), or gel permeation chromatography (GPC), is the primary technique for MWD characterization, as detailed in OECD guidelines 118 and 119, along with DIN and ISO standards. However, SEC faces significant shortcomings that complicate the accurate determination of MWD and oligomer content. These limitations include the insolubility of certain polymers, crosslinking, and ultra-high molecular weight characteristics, which can exceed SEC's separation capabilities. The presence of salts or modifiers can further interfere with oligomer content determination, and the availability of appropriate SEC columns and calibration standards limits comparability across laboratories. To enhance SEC's reliability and applicability within regulatory frameworks, innovative methods and strategies are essential. Proposed solutions involve new sample preparation techniques, advanced data interpretation methods, and the establishment of standardized methodologies to promote harmonization. This is especially crucial in light of the expected Polymer REACh (PREACh) legislation, which aims to regulate polymer registration and risk assessment within the European market. Given the anticipated complexity of the registration process, which requires extensive data generation, proactive strategies are needed to address SEC's challenges. Currently, there are no viable alternatives for oligomer content determination, and the unique properties of polymers often necessitate tailored analytical approaches. Without new methodologies and guidelines, the polymer registration process could become burdensome and costly, jeopardizing important products and markets in the EU. Key areas for improvement include extending existing norms to cover a broader range of solvents, addressing high error margins in oligomer content determination, establishing harmonized approaches for dealing with side components, and providing clarity on measuring partially soluble polymers. In conclusion, addressing SEC's limitations through the development of comprehensive guidelines and harmonization is critical for ensuring accurate and efficient polymer analysis, ultimately facilitating smoother registration processes. T2 - SETAC Europe 35th Annual Meeting CY - Vienna, Austria DA - 11.05.2025 KW - Size exclusion chromatography KW - Polymers KW - REACH PY - 2025 AN - OPUS4-63309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stolar, Tomislav T1 - Upcycling waste PET bottles to porous UiO-66 by mechanochemistry N2 - Single-use plastics are causing plastic pollution, and less than 10% of plastic waste gets recycled globally. Most of it ends up in landfills or gets incinerated in a highly unsustainable manner. Here, I will present a sustainable mechanochemical protocol for the chemical upcycling of polyethylene terephthalate (PET) to porous UiO-66 metal-organic framework (MOF). In the first step, PET is ball-milled with sodium hydroxide and undergoes alkaline hydrolysis to disodium terephthalate (Na2TP). Time-resolved in situ monitoring of ball milling reaction by synchrotron powder X-ray diffraction shows the appearance of crystalline Na2TP after 20 min of milling. However, ex-situ analysis at different milling times by gel permeation chromatography reveals that the depolymerisation step needs more milling for completion. After two hours of ball milling, there are only trace amounts of leftover PET. For upcycling to UiO-66, a zirconium acetate cluster is added to Na2TP together with liquid additives and after milling for T2 - International Conference on Resource Chemistry 2024 CY - Alzenau, Germany DA - 13.03.2024 KW - Mechanochemistry KW - Plastic recycling KW - Circular economy PY - 2024 AN - OPUS4-62105 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fink, Friedrich A1 - Falkenhagen, Jana T1 - From bench to mini – Classification of technical lignins with NIR N2 - Lignin, a by-product of the pulp and paper industry, is the second most abundant biopolymer but remains underutilized due to its complex structure and variability in biomass origin. Classification based on biomass source is crucial for quality assurance and application predictability. This study employs near-infrared (NIR) spectroscopy to classify technical lignins from softwoods, hardwoods, straw, and grasses. Machine learning models (ML), including Support Vector Machines (SVM), Gaussian Process Classification (GPC), Gaussian Naive Bayes (GNB), and Decision Tree Classification (DTC), were developed using spectral preprocessing and principle component analysis (PCA). The models were compared with spectra from handheld and compact spectrometers. Results highlight the potential of NIR spectroscopy and machine learning to enable rapid, reliable lignin classification, paving the way for improved industrial utilization of this abundant resource. T2 - 11th International Symposium on the Separation and Characterization of Natural and Synthetic Macromolecules CY - Amsterdam, The Netherlands DA - 21.01.2025 KW - Lignin KW - Classification KW - Near infrared spectroscopy PY - 2025 AN - OPUS4-62531 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stolar, Tomislav T1 - Waste to value: upcycling PET bottles into MOFs using mechanochemistry N2 - Single-use plastics are causing plastic pollution, and less than 10% of plastic waste gets recycled globally. Most of it ends up in landfills or gets incinerated in a highly unsustainable manner. Here, I will present a sustainable mechanochemical protocol for the chemical upcycling of waste polyethylene terephthalate (PET) bottles to porous UiO-66 metal-organic framework (MOF). We used in situ and ex situ characterization to gain a deep understanding of the underlying mechanochemical process leading to high crystallinity and -porosity UiO-66. Our results show the potential of mechanochemistry for the sustainable production of high-quality value-added materials such as UiO-66 from waste PET bottles. T2 - 2024 Green Chemistry Gordon Research Conference CY - Barcelona, Spain DA - 31.07.2024 KW - Mechanochemistry KW - Plastic recycling KW - Circular economy PY - 2024 AN - OPUS4-62107 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Unlocking black fungi: from genomes to material conservation and biotechnological innovation N2 - Black fungi are a polyphyletic group of melanized ascomycetes adapted to extreme environments such as deserts, rocks, and human-made surfaces. Their slow compact growth, and thick melanized cell walls confer exceptional stress tolerance but have long hindered molecular studies and genetic engineering. Consequently, the biology and biotechnological potential of these organisms remained largely unexplored. To overcome these limitations, we selected the rock-inhabiting black fungus Knufia petricola as a model. Its genome sequence (12 contigs, ~10,000 genes) enabled the development of a versatile genetic toolbox based on CRISPR/Cas9-mediated editing, achieving up to 100% homologous recombination and supporting multiplex editing of at least six genomic regions. Color-based selection systems targeting pigment genes enable rapid identification of strains with correctly integrated expression cassettes, including simultaneous insertion of optimized genes coding for blue, green, and red fluorescent proteins for co-localization and protein interaction studies. These tools enable functional analyses of traits central to extremotolerance, such as the role of melanin in stress protection, biofilm formation, and material interactions. Furthermore, K. petricola has been established as a eukaryotic expression platform: heterologous genes from bacteria, fungi, and plants can be expressed under constitutive or inducible promoters, including the Tet-on system for tunable gene regulation. Pigment-free strains provide access to metabolic precursors, enabling high-level synthesis of alternative secondary metabolites. Importantly, the optimized transformation protocols were successfully transferred to the Antarctic black fungus Cryomyces antarcticus, a cryptoendolithic extremophile and astrobiology model, demonstrating that even the most stress-tolerant fungi can be genetically engineered. Together, the genome sequence and advanced genetic engineering strategies have transformed K. petricola from a challenging extremotolerant organism into a tractable model for studying stress adaptation, material interactions and a promising host for biotechnology and synthetic biology approaches. These achievements, combined with emerging black fungal genomes, inform sustainable material protection strategies to mitigate colonization and biodeterioration of exposed surfaces, linking fundamental research with applied solutions for material conservation and industrial biotechnology. T2 - Annual Conference of the Association for General and Applied Microbiology (VAAM) 2026 CY - Berlin, Germany DA - 22.03.2026 KW - Functional genetics KW - Material colonizer KW - Pigments PY - 2026 AN - OPUS4-65752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Biodiversity on Materials: Black Fungi Colonizing Solar Panels N2 - Sun-exposed surfaces are extreme environments characterized by intense UV radiation, temperature fluctuations, desiccation, and nutrient scarcity. These habitats are colonized by extremotolerant microorganisms that often form multispecies biofilms. Among them, black fungi (Ascomycota) stand out for their unique morphophysiological traits: slow growth, small compact colonies, reproduction by budding or meristematic growth, and continuous deposition of 1,8-dihydroxynaphthalene (DHN) melanin on thickened cell walls. This melanin is thought to provide protection against abiotic stress, for both the fungi and their microbial partners. Originally associated with natural substrates such as rocks in hot, cold, or saline deserts, black fungi have recently been detected on human-made surfaces, including solar panels, where they may reduce system efficiency. Despite their simple morphology, black fungi represent a vast and underestimated genetic diversity with representatives in Eurotiomycetes, Dothideomycetes, and Arthoniomycetes. They exhibit diverse lifestyles, including lichen symbioses, opportunistic pathogenicity, and saprobic growth. However, only a few genomes of black fungi have been sequenced to date. Initial analyses indicate haploid or diploid states, occasional genome duplications, and gene loss, reflecting adaptation to extreme conditions. For even fewer species, genetic engineering tools are available. To address this gap, we develop genetic tools for functional studies and compare genome sequences. The STRES Community Science Program, funded by the Joint Genome Institute (JGI), aims to sequence up to 600 black fungal genomes from diverse extreme environments (https://stresblackfungi.org/). Our contribution includes black fungi isolated from solar panels in Germany and the United States – among some several new species. Annotated genomes are now becoming available, enabling comparative analyses to discover novel genes for enzymes and secondary metabolites. These efforts also support strategies to mitigate undesired biofilm formation on man-made surfaces such as facades and solar panels. T2 - Annual Conference of the Association for General and Applied Microbiology (VAAM) 2026 CY - Berlin, Germany DA - 22.03.2026 KW - Biodiversity KW - Fungi KW - Melanin PY - 2026 AN - OPUS4-65750 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erdmann, Eileen A. T1 - In-vivo Transposon Mutagenesis in the Black Fungus Knufia petricola N2 - Microcolonial black fungi, commonly found on sun-exposed natural and man-made surfaces worldwide, belong to different classes within the Ascomycota but convergently evolved similar morpho-physiological adaptations to colonize extreme low-competitive environments. Genetic studies of these organisms have long been hampered by slow growth, lack of sexual cycles and difficulties in transformation. To overcome these limitations, CRISPR/Cas9-based genome editing was implemented in the rock-inhabiting fungus Knufia petricola (Eurotiomycetes, Chaetothyriales). This enables efficient generation of deletion mutants and overexpression strains for functional analyses, and thus hypothesis-driven targeted mutagenesis. However, the unique ability of black fungi to colonize oligotrophic extreme environments remains poorly understood, and genes involved are unknown. To address this, a hypothesis-generating tool for functional assessment of new species- and/or trait-specific genes was implemented in K. petricola. Specifically, we adapted the two-component Activator/Dissociation (Ac/Ds) transposon system from maize for generating insertional mutants by in vivo mutagenesis. For controlling the transposition of a Ds transposon carrying a resistance cassette, the inducible and metabolism-independent Tet-on promoter system was combined with the Ac transposase (AcTPase) coding sequence fused to a functional nuclear localization signal. In total, six auxotrophic Ac/Ds starter strains were generated, each harboring the Ds transposon at different positions within ade2, ura3 or ppt1. Induction of TET::AcTPase with doxycycline followed by selection on ADE/URA/LYS-lacking media resulted in prototrophic revertants for most Ac/Ds strains. Sequencing of excision sites revealed characteristic footprints. Mapping of Ds re-insertion sites demonstrated transpositions both within the same chromosome and across different chromosomes, identifying 30 genes as non-essential. Current efforts include scaling up mutant generation, as the generation and sequencing of saturated mutant libraries combined with mutation mapping will enable the systematic identification of essential genes under diverse culture conditions. T2 - Annual Conference of the Association for General and Applied Microbiology (VAAM) 2026 CY - Berlin, Germany DA - 22.03.2026 KW - Genetics KW - Material colonizer KW - Melanin PY - 2026 AN - OPUS4-65749 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schumacher, Julia T1 - Iron Acquisition in Black Fungi: Genomic Insights & Mitigation N2 - Iron is an essential micronutrient for all organisms, driving intense competition for its acquisition. This competition is particularly evident in parasitic interactions, where hosts actively restrict iron availability to inhibit the growth of fungal invaders (nutritional immunity). Saprobic fungi, on the other hand, acquire iron by digesting dead organic material and may protect their nutrient sources from competitors through efficient iron uptake, rapid growth, and the production of toxic secondary metabolites. Rock-inhabiting black fungi colonize – alone or within microbial communities (subaerial biofilms) – oligotrophic, exposed surfaces such as rocks, stone monuments, and photovoltaic panels, where competition from fast-growing saprobes is minimal. To understand how these fungi acquire iron, we combined comparative genomics with targeted gene deletions in the model species Knufia petricola. Genome analysis revealed a reduced repertoire of iron acquisition-related genes compared to those of pathogenic relatives: a single reductive iron assimilation (RIA) complex, one non-ribosomal peptide synthetase (NRPS) for siderophore biosynthesis, and absence of vacuolar iron transporters. Functional assays demonstrated that K. petricola primarily relies on RIA, mediated by FTR1–FET1, and secondarily on siderophore-mediated iron acquisition (SIA) via NPS1. Mutants lacking both systems were nearly non-viable under iron limitation, confirming that RIA and SIA are the only relevant uptake routes under laboratory conditions, that simulate the free-living lifestyle. Cross-feeding and chemotropism assays indicated secretion of an extracellular siderophore enabling growth toward the iron-containing mineral olivine. This siderophore, however, failed to mobilize iron from strong chelators such as BPS and EDTA, and its chemical nature remains unknown. Although melanin adsorbs and reduces iron, results on deletion mutants showed that melanin does not contribute to iron uptake or chelator resistance, functioning instead as a passive iron sink. Sensitivity assays revealed unusually low minimal inhibitory concentrations (MICs) for these chelators in K. petricola and other rock-inhabiting fungi, suggesting limited iron acquisition and storage capacity. These findings highlight the vulnerability of rock-inhabiting fungi to iron depletion and suggest that strong iron chelators could serve as an effective strategy to inhibit fungal colonization of human-made surfaces. T2 - Annual Conference of the Association for General and Applied Microbiology (VAAM) 2026 CY - Berlin, Germany DA - 22.03.2026 KW - Material colonization KW - Knufia petricola KW - Iron chelation PY - 2026 AN - OPUS4-65751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -