TY - JOUR
A1 - Hartmann, Yannic
A1 - El Abbassi, Abdelouahad
A1 - Mayer, Bernhard
A1 - Resch-Genger, Ute
A1 - Müller, Thomas J. J.
T1 - Ester‐Aroyl‐S,N‐Ketene Acetals with Solid‐State Luminescence: AIEgens from Sequential Three‐Component Desymmetrization
N2 - AbstractDi(hetero)aroyl dichlorides are desymmetrized upon sequential reaction with alcohols and 2‐methyl N‐benzyl thiazolium salts within the course of a one‐pot three‐component reaction yielding ester‐substituted aroyl‐S,N‐ketene acetals under mild conditions in good yields. A prerequisite for the concise one‐pot process is the different nucleophilicity of the alcohols and in situ generated S,N‐ketene acetals. The resulting compounds are merocyanines with dominant charge‐transfer absorption bands which are fluorescent in the solid state, but not in solution. In water/ethanol solvent mixtures of increasing water content, the water‐insoluble dyes display typical aggregation‐induced emission (AIE) characteristics. The water fraction inducing AIE as well as the emission color, and fluorescence quantum yield (Φf) of the aggregated dyes can be controlled by the alcohol part of the ester moiety. Encapsulation into polystyrene nanoparticles can lead to a considerable increase of the fluorescence quantum yield Φf to 30% as shown for a representatively chosen dye revealing the highest Φf of 11% within the dye series in the water/ethanol mixtures and enabling the usage of these dyes as fluorescent reporters in aqueous environments.
KW - Dye
KW - Fluorescence
KW - Aggregation
KW - Mechanism
KW - Signal enhancement
KW - Nano
KW - Particle
KW - Characterization
KW - Quantum yield
KW - Photophysics
KW - Probe
KW - Sensor
KW - Lifetime
KW - Polarity
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-642400
DO - https://doi.org/10.1002/chem.202502071
SN - 0947-6539
SP - 1
EP - 10
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-64240
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Reichenauer, F.
A1 - Wang, Cui
A1 - Förster, C.
A1 - Boden, P.
A1 - Ugur, N.
A1 - Báez-Cruz, R.
A1 - Kalmbach, J.
A1 - Carrella, L. M.
A1 - Rentschler, E.
A1 - Ramanan, C.
A1 - Niedner-Schatteburg, G.
A1 - Gerhards, M.
A1 - Seitz, M.
A1 - Resch-Genger, Ute
A1 - Heinze, K.
T1 - Strongly Red-Emissive Molecular Ruby [Cr(bpmp)2]3+ Surpasses [Ru(bpy)3]2+
N2 - Gaining chemical control over the thermodynamics and kinetics of photoexcited states is paramount to an efficient and sustainable utilization of photoactive transition metal complexes in a plethora of technologies. In contrast to energies of charge Transfer states described by spatially separated orbitals, the energies of spinflip states cannot straightforwardly be predicted as Pauli Repulsion and the nephelauxetic effect play key roles. Guided by multireference quantum chemical calculations, we report a novel highly luminescent spin-flip emitter with a quantum chemically predicted blue-shifted luminescence. The spin-flip emission band of the chromium complex [Cr(bpmp)2]3+ (bpmp = 2,6-bis(2-pyridylmethyl) pyridine) shifted to higher energy from ca. 780 nm observed for known highly emissive chromium(III) complexes to 709 nm. The photoluminescence quantum yields climb to 20%, and very long excited state lifetimes in the millisecond range are achieved at room temperature in acidic D2O solution. Partial ligand deuteration increases the quantum yield to 25%. The high excited state energy of [Cr(bpmp)2]3+ and its facile reduction to [Cr(bpmp)2]2+ result in a high excited state redox potential. The ligand’s methylene bridge acts as a Brønsted acid quenching the luminescence at high pH. Combined with a pH-insensitive chromium(III) emitter, ratiometric optical pH sensing is achieved with single wavelength excitation. The photophysical and Ground state properties (quantum yield, lifetime, redox potential, and acid/base) of this spin-flip complex incorporating an earth-abundant metal surpass those of the classical precious metal [Ru(α-diimine)3]2+ charge transfer complexes, which are commonly employed in optical sensing and photo(redox) catalysis, underlining the bright future of these molecular ruby analogues.
KW - Fluorescence
KW - Optical probe
KW - Sensor
KW - PH
KW - Quantum yield
KW - Quality assurance
KW - Complex
KW - Cr(III)
KW - Lifetime
KW - Ligand
KW - Theory
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530548
DO - https://doi.org/10.1021/jacs.1c05971
VL - 143
IS - 30
SP - 11843
EP - 11855
PB - ACS Publications
AN - OPUS4-53054
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Auxillos, J.
A1 - Crouigneau, R.
A1 - Li, Y.-F.
A1 - Dai, Y.
A1 - Stigliani, A.
A1 - Tavernaro, Isabella
A1 - Resch-Genger, Ute
A1 - Sandelin, A.
A1 - Marie, R.
A1 - Pedersen, S. F.
T1 - Spatially resolved analysis of microenvironmental gradient impact on cancer cell phenotypes
N2 - Despite the physiological and pathophysiological significance of microenvironmental gradients, e.g., for diseases such as cancer, tools for generating such gradients and analyzing their impact are lacking. Here, we present an integrated microfluidic-based workflow that mimics extracellular pH gradients characteristic of solid tumors while enabling high-resolution live imaging of, e.g., cell motility and chemotaxis, and preserving the capacity to capture the spatial transcriptome. Our microfluidic device generates a pH gradient that can be rapidly controlled to mimic spatiotemporal microenvironmental changes over cancer cells embedded in a 3D matrix. The device can be reopened allowing immunofluorescence analysis of selected phenotypes, as well as the transfer of cells and matrix to a Visium slide for spatially resolved analysis of transcriptional changes across the pH gradient. This workflow is easily adaptable to other gradients and multiple cell types and can therefore prove invaluable for integrated analysis of roles of microenvironmental gradients in biology.
KW - Bioimaging
KW - Fluorescence
KW - Cell
KW - Cancer
KW - Method
KW - Microfluids
KW - Model
KW - Calibration
KW - Sensor
KW - Ph
KW - Probe
KW - Workflow
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-604631
DO - https://doi.org/10.1126/sciadv.adn3448
VL - 19
IS - 18
SP - 1
EP - 17
AN - OPUS4-60463
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Nirmalananthan-Budau, Nithiya
A1 - Budau, J. H.
A1 - Moldenhauer, Daniel
A1 - Hermann, G.
A1 - Kraus, Werner
A1 - Hoffmann, Katrin
A1 - Paulus, Beate
A1 - Resch-Genger, Ute
T1 - Substitution pattern controlled aggregation-induced emission in donor-acceptor-donor dyes with one and two propeller-like triphenylamine donors
N2 - We present a comparative study of the spectroscopic properties of the donor–acceptor–donor substituted dyes triphenylamine-allylidenemalononitrile-julolidine (TMJ) and triphenylamine-allylidenemalononitriletriphenylamine (TMT), bearing one and two propeller-like triphenylamine donor moieties, in solvents of varying polarity and viscosity and in the aggregated and solid state. Our results reveal control of the aggregation-induced spectroscopic changes and the packing motifs of the dye molecules in the solid state by the chemical nature and structure of the second nitrogen-containing donor, i.e., a planar and a rigid julolidine or a twisted triphenyl group. Assuming that the TMT and TMJ aggregates show a comparable arrangement of the molecules to the respective crystals, these different molecular interactions in the solid state are responsible for aggregation induced emission (AIE) in the case of TMT and its absence for TMJ. Moreover, a versatile strategy for the fluorescence enhancement of only weakly emissive AIE dyes is shown, turning these dyes into bright nanoscale fluorescent reporters by using them as stains for preformed polymer particles.
KW - Nano
KW - Nanoparticle
KW - Photoluminescence
KW - Fluorescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - Dye
KW - Enhancement
KW - Particle
KW - Polarity
KW - AIE
KW - Aggregation
KW - Aggregation-induced emission
KW - Solid state emission
PY - 2020
DO - https://doi.org/10.1039/d0cp00413h
VL - 22
IS - 25
SP - 14142
EP - 14154
AN - OPUS4-50967
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wang, Cui
A1 - Kitzmann, W.R.
A1 - Weigert, Florian
A1 - Förster, Ch.
A1 - Wang, X.
A1 - Heintze, K.
A1 - Resch-Genger, Ute
T1 - Matrix Effects on Photoluminescence and Oxygen Sensitivity of a Molecular Ruby
N2 - The molecular ruby analogue [Cr(ddpd)2]3+ (ddpd=N,N’-dimethyl-N,N’-dipyridine-2-ylpyridine-2,6-diamine) exhibits near infrared (NIR) emission with a high photoluminescence (PL) quantum yield ΦPL of 11 % and a lifetime of 898 μs in deaerated water at room temperature. While ligand-based control of the photophysical properties has received much attention, influences of the counter anions and microenvironment are still underexplored. In this study, the luminescence properties of the molecular ruby were systematically examined for the counter anions Cl−, Br−, [BF4]−, [PF6]−, [BPh4]−, and [BArF24]− in acetonitrile (MeCN) solution, in crystals, and embedded into polystyrene nanoparticles (PSNP). Stern-Volmer analyses of the oxygen quenching studies in the intensity and lifetime domain showed the highest oxygen sensitivity of the complexes with the counter anions of [BF4]− and [BArF24]−, which also revealed the longest luminescence lifetimes. Embedding [Cr(ddpd)2][PF6]3 in PSNPs and shielding with poly(vinyl alcohol) yields a strongly NIR-emissive oxygen-insensitive material with a record ΦPL of 15.2 % under ambient conditions.
KW - Fluorescence
KW - Sensor
KW - Oxygen
KW - Quantum yield
KW - Quality assurance
KW - Complex
KW - Cr(III)
KW - Lifetime
KW - Ligand
KW - Solid state
KW - X-Ray analysis
KW - Structure-property relationship
KW - Nano
KW - Polymer
KW - Particle
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-546057
DO - https://doi.org/10.1002/cptc.202100296
SN - 2367-0932
VL - 6
IS - 6
SP - 1
EP - 9
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-54605
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Witte, F.
A1 - Rietsch, P.
A1 - Nirmalananthan-Budau, Nithiya
A1 - Weigert, Florian
A1 - Götze, J. P.
A1 - Resch-Genger, Ute
A1 - Eigler, S.
A1 - Paulus, B.
T1 - Aggregation-induced emission leading to two distinct emissive species in the solid-state structure of high-dipole organic chromophores
N2 - The concept of aggregation-induced emission represents a means to rationalise photoluminescence of usually nonfluorescent excimers in solid-state materials. In this publication, we study the photophysical properties of selected diaminodicyanoquinone (DADQ) derivatives in the solid state using a combined approach of experiment and theory. DADQs are a class of high-dipole organic chromophores promising for applications in non-linear optics and light-harvesting devices. Among the compounds investigated, we find both aggregation-induced emission and aggregation-caused quenching effects rationalised by calculated energy transfer rates. Analysis of fluorescence spectra and lifetime measurements provide the interesting result that (at least) two emissive species seem to contribute to the photophysical properties of DADQs. The main emission peak is notably broadened in the long-wavelength limit and exhibits a blue-shifted shoulder. We employ high-level quantum-chemical methods to validate a molecular approach to a solid-state problem and show that the complex emission features of DADQs can be attributed to a combination of H-type aggregates, monomers, and crystal structure defects.
KW - Fluorescence
KW - Optical probe
KW - Dye
KW - Photophysics
KW - Theory
KW - Quantum yield
KW - Mechanism
KW - Quantum chemistry
KW - Modelling
KW - Aggregation
KW - Lifetime
KW - Single particle
KW - Microscopy
KW - Solid
KW - Crystal
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-531138
DO - https://doi.org/10.1039/d1cp02534a
SP - 1
EP - 9
PB - Royal Society of Chemistry
AN - OPUS4-53113
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - López-Puertollano, Daniel
A1 - Tobias, Charlie
A1 - Bell, Jérémy
A1 - Abad-Somovilla, A.
A1 - Abad-Fuentes, A.
A1 - Rurack, Knut
T1 - Superparamagnetic Bead-Based Microfluidic Fluoroimmunoassay Platform for Rapid Ochratoxin A Detection in Flour
N2 - Simplification and reduction of time and costs are the primary goals in the development and use of onsite methods in diagnostics and food safety. To facilitate the transition from laboratory techniques to simple, miniaturized devices, we have developed a modular microfluidic platform. This platform integrates a competitive fluorescence immunoassay on the surface of superparamagnetic beads, serving as a complementary technique to traditional cytometry assays. In the first chip module, a fast competitive reaction (5 min) occurs, after which the particles are retained in the second module. This module consists of a PDMS chip and a permanent magnet, allowing only the fluorescent competitor to reach the detection module. Ochratoxin A (OTA) was chosen as the model analyte for device development, using fluorescein-labeled OTA as a competitor. The system efficiently separates particles, with OTA concentration directly correlated to the amount of fluorescent competitor remaining in solution after the competitive reaction. This innovative setup allows to perform rapid measurements with small sample volumes in a short time (10 min), achieving a limit of detection for OTA of 1.2 μg L–1. The system was successfully applied to the accurate determination of OTA in wheat flour spiked at regulatorily relevant concentrations. Using this device, conventional cytometry immunoassays can be seamlessly transformed into user-friendly, miniaturized analytical methods at reduced cost for applications outside of a laboratory directly at the point of need.
KW - Bead-based assay
KW - Fluorescence
KW - Immunoassay
KW - Microfluidics
KW - mycotoxins
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-638472
DO - https://doi.org/10.1021/acssensors.5c01119
SN - 2379-3694
SP - 1
EP - 10
PB - American Chemical Society
CY - Washington, D.C.
AN - OPUS4-63847
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sun, Yijuan
A1 - Gawlitza, Kornelia
A1 - Valderrey, Virginia
A1 - Bell, Jérémy
A1 - Rurack, Knut
T1 - Polymerizable BODIPY probe crosslinker for the molecularly imprinted polymer-based detection of organic carboxylates via fluorescence
N2 - This contribution reports the development of a polymerizable BODIPY-type fluorescent probe targeting small-molecule carboxylates for incorporation into molecularly imprinted polymers (MIPs). The design of the probe crosslinker includes a urea recognition site p-conjugated to the 3-position of the BODIPY core and two methacrylate moieties. Titration experiments with a carboxylate-expressing antibiotic, levofloxacin (LEVO), showed a blue shift of the absorption band as well as a broadening and decrease in emission, attributed to hydrogen bonding between the probe’s urea group and the carboxylate group of the antibiotic. Using this probe crosslinker, core–shell particles with a silica core and a thin MIP shell were prepared for the detection of LEVO. The MIP exhibited highly selective recognition of LEVO, with an imprinting factor of 18.1 compared to the non-imprinted polymer. Transmission electron microscopy confirmed the core–shell structure and spectroscopic studies revealed that the receptor’s positioning leads to a unique perturbation of the polymethinic character of the BODIPY chromophore, entailing the favourable responses. These features are fully preserved in the MIP, whereas no such response was observed for competitors such as ampicillin. The sensory particles allowed to detect LEVO down to submicromolar concentrations in dioxane. We have developed here for the first time a BODIPY probe for organic carboxylates and incorporated it into polymers using the imprinting technique, paving the way for BODIPY-type fluorescent MIP sensors.
KW - Fluorescence
KW - BODIPY probe
KW - Molecularly Imprinted Polymers
KW - Sensor Materials
KW - Dyes
KW - Water analysis
KW - Advanced materials
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-598629
DO - https://doi.org/10.1039/D3MA00476G
SP - 1
EP - 11
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-59862
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Rurack, Knut
T1 - PFAS Sensors
N2 - This contribution provides an introduction to the development of sensors for PFAS analysis, presents the most common approaches, and describes the opto-microfluidic strategy in combination with polymerizable indicators and detection matrices currently being pursued by the Chemical and Optical Sensing Division at BAM.
T2 - Advancements of Analytical Techniques for Per- and Polyfluoroalkyl Substances (PFAS) – Second Workshop 2023
CY - Berlin, Germany
DA - 19.09.2023
KW - PFAS
KW - Sensors
KW - Molecularly imprinted polymers
KW - Microfluidics
KW - Fluorescence
PY - 2023
AN - OPUS4-58533
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Biyikal, Mustafa
A1 - Rurack, Knut
T1 - Development of a Lab-on-a-Chip for the Detection of Nerve Agents with a Handheld Device
N2 - The development of a Lab-on-a-Chip (LoC) is presented, which can detect reactive phosphorous compounds in the gas phase in combination with an optochemical hand-held sensor. The LoC prototype contains three pairs of sensing materials containing fluorescent indicator dyes in various carrier materials. By measuring the fluorescence response to phosphoryl chloride, a surrogate compound, the detection of chemical warfare agents (CWAs) in gas phase becomes possible within seconds, introducing a novel approach to CWA detection.
T2 - 2023 IEEE SENSORS Conference
CY - Vienna, Austria
DA - 29.10.2023
KW - Lab-on-a-Chip
KW - Nerve agents
KW - Hand-held
KW - Fluorescence
KW - Toxic industrial chemicals
PY - 2023
UR - https://ieeexplore.ieee.org/document/10325263
SN - 979-8-3503-0387-2
DO - https://doi.org/10.1109/SENSORS56945.2023.10325263
SP - 1
EP - 4
PB - IEEE
CY - New York
AN - OPUS4-59367
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Mansurova, Maria
A1 - Gotor, Raúl
A1 - Johann, Sergej
A1 - Neumann, Patrick P.
A1 - Bartholmai, Matthias
A1 - Rurack, Knut
A1 - Bell, Jérémy
T1 - Fluorescent Hydrophobic Test Strips with Sterically Integrated Molecular Rotors for the Detection of Hydrocarbons in Water and Soil with an Embedded Optical Read-Out
N2 - Contamination of natural bodies of water or soil with oils and lubricants (or generally, hydrocarbon derivatives such as petrol, fuels, and others) is a commonly found phenomenon around the world due to the extensive production, transfer, and use of fossil fuels. In this work, we develop a simple system for the on-field detection of total petroleum hydrocarbons (TPHs) in water and soil. The test is based on the measurement of the fluorescence signal emitted by the molecular rotor 2-[ethyl[4-[2-(4-nitrophenyl)ethenyl]phenyl]amino]ethanol (4-DNS-OH). This dye is embedded in a hydrophobic polymeric matrix (polyvinylidene fluoride), avoiding interactions with water and providing a robust support for use in a test strip fashion. Together with the strips, an embedded optical system was designed for fluorescence signal read-out, featuring a Bluetooth low-energy connection to a commercial tablet device for data processing and analysis. This system works for the detection and quantification of TPHs in water and soil through a simple extraction protocol using a cycloalkane solvent with a limit of detection of 6 ppm. Assays in surface and sea waters were conclusive, proving the feasibility of the method for in-the-field operation.
KW - Test strip
KW - Sensor
KW - Smartphone
KW - Fluorescence
KW - Test Streifen
KW - Sensoren
KW - Fluoreszenz
KW - Petrol
KW - Öl
PY - 2023
DO - https://doi.org/10.1021/acs.energyfuels.3c01175
SN - 0887-0624
SP - 1
EP - 6
PB - American Chemical Society
CY - Washington, United States
AN - OPUS4-57892
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Rurack, Knut
T1 - Sensitive and multiplexed assays for point-of-need applications: innovations for robust, reliable, and user-friendly diagnostics
N2 - The development of portable analytical assays, particularly during the SARS-CoV-2 pandemic, has revolutionized diagnostics and expanded their use to areas such as food safety, environmental monitoring and forensics. These assays offer the advantage of rapid on-site decision making without the need for laboratory facilities. The omnipresence of mobile devices with advanced cameras and processing power further increases their usability. However, most current assays are limited to detecting single parameters. The challenge now is to develop robust multiplexed assays that can simultaneously detect multiple parameters with high sensitivity. This lecture will present generic approaches developed at BAM with a focus on supramolecular chemistry, luminescence detection, nanomaterials and miniaturization of devices. Examples include mesoporous nanomaterials, gated indicator systems, imprinted polymers, microfluidic devices, test strips and smartphone-based analysis.
T2 - Kolloquium Optische Technologien der FH Münster
CY - Steinfurt, Germany
DA - 18.12.2024
KW - Rapid testing
KW - Fluorescence
KW - Explosives
KW - Environmental contaminants
KW - Multiplexing
PY - 2024
AN - OPUS4-62322
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Rurack, Knut
T1 - Development of a Lab-on-a-Chip for the Detection of Nerve Agents with a Handheld Device
N2 - The development of a Lab-on-a-Chip (LoC) is presented, which can detect reactive phosphorous compounds in the gas phase in combination with an optochemical hand-held sensor. The LoC prototype contains three pairs of sensing materials containing fluorescent indicator dyes in various carrier materials. By measuring the fluorescence response to phosphoryl chloride, a surrogate compound, the detection of chemical warfare agents (CWAs) in gas phase becomes possible within seconds, introducing a novel approach to CWA detection.
T2 - IEEE Sensors Conference
CY - Vienna, Austria
DA - 29.10.2023
KW - Chemical warfare agents
KW - Lab-on-a-chip
KW - Handheld sensors
KW - Toxic industrial chemicals
KW - Fluorescence
PY - 2023
AN - OPUS4-58815
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Yanbaeva, M.
A1 - Soyka, J.
A1 - Holthoff, J. M.
A1 - Rietsch, P.
A1 - Engelage, E.
A1 - Ruff, A.
A1 - Resch-Genger, Ute
A1 - Weiss, R.
A1 - Eigler, S.
A1 - Huber, S. M.
T1 - Dimethylene-Cyclopropanide Units as Building Blocks for Fluorescence Dyes
N2 - Many organic dyes are fluorescent in solution. In the solid state, however, quenching processes often dominate, hampering material science applications such as light filters, light-emitting devices, or coding tags. We show that the dimethylene-cyclopropanides caffold can be used to form two structurally different types of chromophores, which feature fluorescence quantum yields up to 0.66 in dimethyl sulfoxide and 0.53 in
solids. The increased fluorescence in the solid state for compounds bearing malonate substituents instead of dicyanomethide ones is rationalized by the induced twist between the planes of the cyclopropanide core and a pyridine ligand.
KW - Fluorescence
KW - Dye
KW - Sensor
KW - Quantum yield
KW - Spectroscopy
KW - Photophysics
KW - Synthesis
KW - Solvatochromism
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614931
DO - https://doi.org/10.1002/chem.202402476
VL - 30
IS - 56
SP - 1
EP - 7
PB - Chemistry - A European Journal
AN - OPUS4-61493
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - From molecular and nanoscale chromophores with UV/VIS/NIR/SWIR luminescence to multi method characterization of surface coatings
N2 - An overview of the research activities of division Biophotonics is presented covering examples for photophysical studies of different types of molecular and nanocrystalline luminophores, luminescent particles, and sensor systems in solution, in dispersion, and in the solid state and multi-method charactreization workflow for the characterization of surface-functionalized engineered nanomaterials. In addition, the importance of reliable optical measurements, particularly standardized workflows for the determination of the key performance parameter luminescence quantum yield of transparent and scattering luminescent samples with fluorescence and integrating sphere spectroscopy, and validated methods for quantifying surface functional groups and ligands on nanomaterials is highlighted. Thereby, also ongoing standardization activities are presented as well as certified reference materials and reference materials from division Biophotonics.
T2 - Chinese-German Chemical Association - Annual Meeting
CY - Berlin, Germany
DA - 22.08.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Quantum yield
KW - Characterization
KW - Advanced material
KW - Surface
KW - Lifetime
KW - Sensor
KW - Oxygen
KW - Ph
KW - Standardization
KW - Fluorescent probe
KW - Reference material
PY - 2025
AN - OPUS4-64181
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scholtz, Lena
A1 - Eckert, J. G.
A1 - Elahi, T.
A1 - Lübkemann, F.
A1 - Hübner, Oskar
A1 - Bigall, N. C.
A1 - Resch-Genger, Ute
T1 - Luminescence encoding of polymer microbeads with organic dyes and semiconductor quantum dots during polymerization
N2 - Luminescence-encoded microbeads are important tools for many applications in the life and material sciences that utilize luminescence detection as well as multiplexing and barcoding strategies. The preparation of such beads often involves the staining of premanufactured beads with molecular luminophores using simple swelling procedures or surface functionalization with layer-by-layer (LbL) techniques. Alternatively, these luminophores are sterically incorporated during the polymerization reaction yielding the polymer beads. The favorable optical properties of semiconductor quantum dots (QDs), which present broadly excitable, size-tunable, narrow emission bands and low photobleaching sensitivity, triggered the preparation of beads stained with QDs. However, the colloidal nature and the surface chemistry of these QDs, which largely controls their luminescence properties, introduce new challenges to bead encoding that have been barely systematically assessed. To establish a straightforward approach for the bead encoding with QDs with minimized loss in luminescence, we systematically assessed the incorporation of oleic acid/oleylamine-stabilized CdSe/CdS-core/shell-QDs into 0.5–2.5 μm-sized polystyrene (PS) microspheres by a simple dispersion polymerization synthesis that was first optimized with the organic dye Nile Red. Parameters addressed for the preparation of luminophore-encoded beads include the use of a polymer-compatible ligand such as benzyldimethyloctadecylammonium chloride (OBDAC) for the QDs, and crosslinking to prevent luminophore leakage. The physico-chemical and optical properties of the resulting beads were investigated with electron microscopy, dynamic light scattering, optical spectroscopy, and fluorescence microscopy. Particle size distribution, fluorescence quantum yield of the encapsulated QDs, and QD leaking stability were used as measures for bead quality. The derived optimized bead encoding procedure enables the reproducible preparation of bright PS microbeads encoded with organic dyes as well as with CdSe/CdS-QDs. Although these beads show a reduced photoluminescence quantum yield compared to the initially very strongly luminescent QDs, with values of about 35%, their photoluminescence quantum yield is nevertheless still moderate.
KW - Polymerization
KW - Quantum dots
KW - Microbeads
KW - Fluorescence
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-553430
DO - https://doi.org/10.1038/s41598-022-16065-x
SN - 2045-2322
VL - 12
SP - 1
EP - 16
PB - Nature Publishing Group
CY - London
AN - OPUS4-55343
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kromer, C.
A1 - Schwibbert, Karin
A1 - Gadicherla, A. K.
A1 - Thiele, Dorothea
A1 - Nirmalananthan-Budau, Nithiya
A1 - Laux, P.
A1 - Resch-Genger, Ute
A1 - Luch, A.
A1 - Tschiche, H. R.
T1 - Monitoring and imaging pH in biofilms utilizing a fluorescent polymeric nanosensor
N2 - Biofilms are ubiquitous in nature and in the man-made environment. Given their harmful effects on human health, an in-depth understanding of biofilms and the monitoring of their formation and growth are important. Particularly relevant for many metabolic processes and survival strategies of biofilms is their extracellular pH. However, most conventional techniques are not suited for minimally invasive pH measurements of living biofilms. Here, a fluorescent nanosensor is presented for ratiometric measurements of pH in biofilms in the range of pH 4.5–9.5 using confocal laser scanning microscopy. The nanosensor consists of biocompatible polystyrene nanoparticles loaded with pH-inert dye Nile Red and is surface functionalized with a pH-responsive fluorescein dye. Its performance was validated by fluorometrically monitoring the time-dependent changes in pH in E. coli biofilms after glucose inoculation at 37 °C and 4 °C. This revealed a temperature-dependent decrease in pH over a 4-h period caused by the acidifying glucose metabolism of E. coli. These studies demonstrate the applicability of this nanosensor to characterize the chemical microenvironment in biofilms with fluorescence methods.
KW - Dye
KW - Fluorescence
KW - Signal enhancement
KW - Sensor
KW - Quantum yield
KW - Synthesis
KW - Nanoparticle
KW - Nano
KW - Polymer
KW - Ph
KW - Biofilm
KW - MIC
KW - Corrosion
KW - Microorganism
KW - Bacteria
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550751
DO - https://doi.org/10.1038/s41598-022-13518-1
SN - 2045-2322
VL - 12
IS - 1
SP - 1
EP - 10
PB - Nature Publishing Group
CY - London
AN - OPUS4-55075
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Stein, L.
A1 - Wang, Cui
A1 - Förster, C.
A1 - Resch-Genger, Ute
A1 - Heinze, K.
T1 - Bulky ligands protect molecular ruby from oxygen quenching
N2 - Chromium(III) complexes can show phosphorescence from the spin-flip excited doublet states 2E/2T1 in the near-infrared with high photoluminescence quantum yields and extremely long lifetimes in the absence of dioxygen. The prototype molecular ruby, [Cr(ddpd)2]3+ (ddpd = N,N’-dimethyl-N,N’-dipyridine-2-ylpyridine-2,6-diamine), has a photoluminescence quantum yield and a luminescence lifetime of 13.7% and 1.1 ms in deaerated acetonitrile, respectively. However, its luminescence is strongly quenched by 3O2 via an efficient Dexter-type energy transfer process. To enable luminescence applications of molecular rubies in solution under aerobic conditions, we explored the potential of sterically demanding ddpd ligands to shield the chromium(III) center from O2 using steady state and time-resolved photoluminescence spectroscopy. The structures of the novel complexes with sterically demanding ligands were investigated by single crystal X-ray diffraction and quantum chemically by density functional theory calculations. The O2 sensitivity of the photoluminescence was derived from absolutely measured photoluminescence quantum yields and excited state lifetimes under inert and aerobic conditions and by Stern–Volmer analyses of these data. Optimal sterically shielded chromium(III) complexes revealed photoluminescence quantum yields of up to 5.1% and excited state lifetimes of 518 μs in air-saturated acetonitrile, underlining the large potential of this ligand design approach to broaden the applicability of highly emissive chromium(III) complexes.
KW - Fluorescence
KW - Synthesis
KW - Production
KW - Optical spectroscopy
KW - Ligand
KW - Photophysics
KW - Cr(III)
KW - Mechanism
KW - NIR
KW - Sensor
KW - Oxygen
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570807
DO - https://doi.org/10.1039/d2dt02950b
VL - 51
IS - 46
SP - 17664
EP - 17670
PB - The Royal Society of Chemistry
CY - Berlin
AN - OPUS4-57080
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Scholtz, Lena
A1 - Tavernaro, Isabella
A1 - Eckert, J. G.
A1 - Lutowski, Marc
A1 - Geißler, Daniel
A1 - Hertwig, Andreas
A1 - Hidde, Gundula
A1 - Bigall, N. C.
A1 - Resch-Genger, Ute
T1 - Influence of nanoparticle encapsulation and encoding on the surface chemistry of polymer carrier beads
N2 - Surface-functionalized polymer beads encoded with molecular luminophores and nanocrystalline emitters such as semiconductor nanocrystals, often referred to as quantum dots (QDs), or magnetic nanoparticles are broadly used in the life sciences as reporters and carrier beads. Many of these applications require a profound knowledge of the chemical nature and total number of their surface functional groups (FGs), that control bead charge, colloidal stability, hydrophobicity, and the interaction with the environment and biological systems. For bioanalytical applications, also the number of groups accessible for the subsequent functionalization with, e.g., biomolecules or targeting ligands is relevant. In this study, we explore the influence of QD encoding on the amount of carboxylic acid (COOH) surface FGs of 2 μm polystyrene microparticles (PSMPs). This is done for frequently employed oleic acid and oleylamine stabilized, luminescent core/shell CdSe QDs and two commonly used encoding procedures. This included QD addition during bead formation by a thermally induced polymerization reaction and a post synthetic swelling procedure. The accessible number of COOH groups on the surface of QD-encoded and pristine beads was quantified by two colorimetric assays, utilizing differently sized reporters and electrostatic and covalent interactions. The results were compared to the total number of FGs obtained by a conductometric titration and Fourier transform infrared spectroscopy (FTIR). In addition, a comparison of the impact of QD and dye encoding on the bead surface chemistry was performed. Our results demonstrate the influence of QD encoding and the QD-encoding strategy on the number of surface FG that is ascribed to an interaction of the QDs with the carboxylic acid groups on the bead surface. These findings are of considerable relevance for applications of nanoparticle-encoded beads and safe-by-design concepts for nanomaterials.
KW - Optical spectroscopy
KW - Particle
KW - Optical assay
KW - IR spectroscopy
KW - Fluorescence
KW - Quantum yield
KW - Quality assurance
KW - Nano
KW - Synthesis
KW - Surface chemistry
KW - Quantification
KW - Method
KW - Conductometry
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-581502
DO - https://doi.org/10.1038/s41598-023-38518-7
SN - 2045-2322
VL - 13
IS - 1
SP - 1
EP - 15
PB - Springer Nature
CY - London
AN - OPUS4-58150
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Reiber, T.
A1 - Hübner, Oskar
A1 - Dose, C.
A1 - Yushchenko, D. A.
A1 - Resch-Genger, Ute
T1 - Fluorophore multimerization on a PEG backbone as a concept for signal amplification and lifetime modulation
N2 - Fluorescent labels have strongly contributed to many advancements in bioanalysis, molecular biology, molecular imaging, and medical diagnostics. Despite a large toolbox of molecular and nanoscale fluorophores to choose from, there is still a need for brighter labels, e.g., for flow cytometry and fluorescence microscopy, that are preferably of molecular nature. This requires versatile concepts for fluorophore multimerization, which involves the shielding of dyes from other chromophores and possible quenchers in their neighborhood. In addition, to increase the number of readout parameters for fluorescence microscopy and eventually also flow cytometry, control and tuning of the labels’ fluorescence lifetimes is desired. Searching for bright multi-chromophoric or multimeric labels, we developed PEGylated dyes bearing functional groups for their bioconjugation and explored their spectroscopic properties and photostability in comparison to those of the respective monomeric dyes for two exemplarily chosen fluorophores excitable at 488 nm. Subsequently, these dyes were conjugated with anti-CD4 and anti-CD8 immunoglobulins to obtain fluorescent conjugates suitable for the labeling of cells and beads. Finally, the suitability of these novel labels for fluorescence lifetime imaging and target discrimination based upon lifetime measurements was assessed. Based upon the results of our spectroscopic studies including measurements of fluorescence quantum yields (QY) and fluorescence decay kinetics we could demonstrate the absence of significant dye-dye interactions and self-quenching in these multimeric labels. Moreover, in a first fluorescence lifetime imaging (FLIM) study, we could show the future potential of this multimerization concept for lifetime discrimination and multiplexing.
KW - Imaging
KW - Quantum yield
KW - Quality assurance
KW - Antibody
KW - Conjugate
KW - Cell
KW - FLIM
KW - PEG
KW - Flow cytometry
KW - Lifetime
KW - Energy transfer
KW - Quantitative spectroscopy
KW - Nano
KW - Particle
KW - Fluorescence
KW - Dye
KW - Amplification
KW - Microscopy
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-602197
DO - https://doi.org/10.1038/s41598-024-62548-4
SN - 2045-2322
VL - 14
IS - 1
SP - 1
EP - 11
AN - OPUS4-60219
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wang, Cui
A1 - Ebel, Kenny
A1 - Heinze, Katja
A1 - Resch-Genger, Ute
A1 - Bald, Ilko
T1 - Quantum Yield of DNA Strand Breaks under Photoexcitation of a Molecular Ruby
N2 - Photodynamic therapy (PDT) used for treating cancer relies on the generation of highly reactive oxygen species, for example, singlet oxygen 1O2, by light-induced excitation of a photosensitizer (PS) in the presence of molecular oxygen, inducing DNA damage in close proximity of the PS. Although many precious metal complexes have been explored as PS for PDT and received clinical approval, only recently, the potential of photoactive complexes of nonnoble metals as PS has been discovered. Using the DNA origami technology that can absolutely quantify DNA strand break cross sections, we assessed the potential of the luminescent transition metal complex [Cr(ddpd)2]3+ (ddpd=N,N’-dimethyl-N,N’-dipyridine-2-ylpyridine-2,6-diamine) to damage DNA in an air-saturated aqueous environment upon UV/Vis illumination. The quantum yield for strand breakage, that is, the ratio of DNA strand breaks to the number of absorbed photons, was determined to 1–4%, indicating efficient transformation of photons into DNA strand breaks by [Cr(ddpd)2]3+.
KW - Fluorescence
KW - Synthesis
KW - Production
KW - Optical spectroscopy
KW - Ligand
KW - Photophysics
KW - Cr(III)
KW - Mechanism
KW - NIR
KW - PDT
KW - Singlet oxygen
KW - DNA
KW - Origami
KW - Quantum yield
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-573631
DO - https://doi.org/10.1002/chem.202203719
SP - 1
EP - 7
AN - OPUS4-57363
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tavernaro, Isabella
A1 - Sander, P. C.
A1 - Andresen, Elina
A1 - Schedler, U.
A1 - Resch-Genger, Ute
T1 - Expanding the Toolbox of Simple, Cost-Efficient, and Automatable Methods for Quantifying Surface Functional Groups on Nanoparticles� Potentiometric Titration
N2 - Measuring surface functional groups (FGs) on nanomaterials (NMs) is essential for designing dispersible and stable NMs with tailored and predictable functionality. FG screening and quantification also plays a critical role for subsequent processing steps, NM long-term stability, quality control of NM production, and risk assessment studies and enables the implementation of sustainable and safe(r)-by-design concepts. This calls for simple and cost-efficient methods for broadly utilized FGs that can be ideally automated to speed up FG screening, monitoring, and quantification. To expand our NM surface analysis toolbox, focusing on simple methods and broadly available, cost-efficient instrumentation, we explored a NM-adapted pH titration method with potentiometric and optical readout for measuring the total number of (de)protonable FGs on representatively chosen commercial and custom-made aminated silica nanoparticles (SiO2 NPs). The accuracy and robustness of our stepwise optimized workflows was assessed by several operators in two laboratories and method validation was done by cross-comparison with two analytical methods relying on different signal generation principles. This included traceable, chemo-selective quantitative nuclear magnetic resonance spectroscopy (qNMR) and thermogravimetric analysis (TGA), providing the amounts of amino silanes released by particle dissolution and the total mass of the surface coatings. A comparison of the potentiometric titration results with the reporter-specific amounts of surface amino FGs determined with the previously automated fluorescamine (Fluram) assay highlights the importance of determining both quantities for surface-functionalized NMs. In the future, combined NM surface analysis with optical assays and pH titration will simplify quality control of NM production processes and stability studies and can yield large data sets for NM grouping that facilitates further developments in regulation and standardization.
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Characterization
KW - Advanced material
KW - Surface
KW - Standardization
KW - Reference material
KW - Functional group
KW - Quantification
KW - Coating
KW - Automation
KW - Potentiometry
KW - Method
KW - Validation
KW - Optical assay
KW - Fluram
KW - Fluorescamine
KW - qNMR
KW - Comparison
KW - ILC
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-642371
DO - https://doi.org/10.1021/acsmeasuresciau.5c00062
SN - 2694-250X
SP - 1
EP - 13
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-64237
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Richter, Maria
A1 - Güttler, Arne
A1 - Pauli, Jutta
A1 - Vogel, K.
A1 - Homann, Christian
A1 - Würth, Christian
A1 - Resch-Genger, Ute
T1 - Extending certified spectral fluorescence standards for the calibration and performance validation of fluorescence instruments to the NIR—closing the gap from 750 to 940 nm with two novel NIR dyes
N2 - Fluorescence techniques such as fluorescence spectroscopy, microfluorometry, and fluorescence microscopy, providing spectral, intensity, polarization, and lifetime information, are amongst the most broadly utilized analytical methods in the life and materials sciences. However, the measured fluorescence data contain sample- and instrument-specific contributions, which hamper their comparability across instruments and laboratories. Comparable, instrument-independent fluorescence data require the determination of the fluorescence instrument’s wavelength-dependent spectral responsivity, also termed emission correction curve, for the same instrument settings as those used for the fluorescence measurements as a prerequisite for the subsequent correction of the measured instrument-specific data. Such a spectral correction is essential for the performance comparison of different fluorescent labels and reporters, quantitative fluorescence measurements, the determination of the fluorescence quantum yield, and the spectroscopic measure for the fluorescence efficiency of a fluorophore. Simple-to-use tools for obtaining emission correction curves are chromophore-based reference materials (RMs), referred to as fluorescence standards, with precisely known, preferably certified instrument-independent fluorescence spectra. However, for the increasingly used near-infrared (NIR) wavelength region >700 nm, at present, no spectral fluorescence standards are available. To close this gap, we developed two novel spectral fluorescence standards, BAM F007 and BAM-F009, with broad emission bands from about 580 to 940 nm in ethanolic solution. These liquid fluorescence standards currently under certification, which will be released in 2025, will expand the wavelength range of the already available certified Calibration Kit BAM F001b-F005b from about 300–730 to 940 nm. In this research article, we will detail the criteria utilized for dye and matrix selection and the homogeneity and stability tests accompanying dye certification as well as the calculation of the wavelength-dependent uncertainty budgets of the emission spectra BAM F007 and BAM-F009, determined with the traceably calibrated BAM reference spectrofluorometer. These fluorescence standards can provide the basis for comparable fluorescence measurements in the ultraviolet, visible, and NIR for the fluorescence community.
KW - Quality assurance
KW - Reference material
KW - Fluorescence
KW - Dye
KW - Traceability
KW - Metrology
KW - Calibration
KW - Reference data
KW - Reference product
KW - Digital certificate
KW - NIR
KW - Instrument performance validation
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626317
DO - https://doi.org/10.1007/s00216-024-05723-w
SN - 1618-2650
SP - 1
EP - 15
PB - Springer
AN - OPUS4-62631
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Deumer, J.
A1 - Andresen, Elina
A1 - Gollwitzer, C.
A1 - Schürmann, R.
A1 - Resch-Genger, Ute
T1 - Adding More Shape to Nanoscale Reference Materials-LiYF4:Yb,Tm Bipyramids as Standards for Sizing Methods and Particle Number Concentration
N2 - The increasing industrial use of nanomaterials calls for the reliable characterization of their physicochemical key properties like size, size distribution, shape, and surface chemistry, and test and reference materials (RMs) with sizes and shapes, closely matching real-world nonspheric nano-objects. An efficient strategy to minimize efforts in producing nanoscale RMs (nanoRMs) for establishing, validating, and standardizing methods for characterizing nanomaterials are multimethod nanoRMs.
Ideal candidates are lanthanide-based, multicolor luminescent, and chemically inert nanoparticles (NPs) like upconversion nanoparticles (UCNPs), which can be prepared in different sizes, shapes, and chemical composition with various surface coatings. This makes UCNPs interesting candidates as standards not only for sizing methods, but also for element-analytical methods like laser ablation-inductively coupled plasma mass spectrometry (LA-ICP-MS), quantitative bioimaging methods like X-ray fluorescence computed tomography (XFCT), and luminescence methods and correlative measurements.
Here, we explore the potential of two monodisperse LiYF4:Yb,Tm bipyramids with peak-to-peak distances of (43 ± 2) nm and (29 ± 2) nm as size standards for small-angle X-ray scattering (SAXS) and tools for establishing and validating the sophisticated simulations required for the analysis of SAXS data derived from dispersions of nonspheric nano-objects. These SAXS studies are supplemented by two-dimensional (2D)-transmission electron microscopy measurements of the UCNP bipyramids. Additionally, the particle number concentration of cyclohexane dispersions of these UCNP bipyramids is determined by absolute SAXS measurements, complemented by gravimetry, thermogravimetric analysis (TGA), and inductively coupled plasma optical emission spectrometry (ICP-OES). This approach enables traceable particle number concentration measurements of ligand-capped nonspheric particles with unknown chemical composition.
KW - Fluorescence
KW - Upconversion nanoparticles
KW - SAXS
KW - Particle number concentration
KW - Reference material
KW - Traceability
KW - Quality assurance
KW - Quantum yield
KW - Spectroscopy
KW - Synthesis
KW - Quantification
KW - NanoRM
KW - Nano
KW - Particle
KW - Bipyramid
KW - Reference data
KW - Simulation
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-617940
DO - https://doi.org/10.1021/acs.analchem.4c03641
SP - 1
EP - 8
PB - ACS Publications
AN - OPUS4-61794
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
A1 - Carl, F.
A1 - Grauel, Bettina
A1 - Pons, Monica
A1 - Würth, Christian
A1 - Haase, M.
T1 - LiYF4:Yb/LiYF4 and LiYF4:Yb,Er/LiYF4 core/shell nanocrystals with luminescence decay times similar to YLF laser crystals and the upconversion quantum yield of the Yb,Er doped nanocrystals
N2 - We developed a procedure to prepare luminescent LiYF4:Yb/LiYF4 and LiYF4:Yb,Er/LiYF4 core/shell nanocrystals with a size of approximately 40 nm revealing luminescence decay times of the dopant ions that approach those of high-quality laser crystals of LiYF4:Yb (Yb:YLF) and LiYF4:Yb,Er (Yb,Er:YLF) with identical doping concentrations. As the luminescence decay times of Yb3+ and Er3+ are known to be very sensitive to the presence of quenchers, the long decay times of the core/shell nanocrystals indicate a very low number of defects in the core particles and at the core/shell interfaces. This improvement in the performance was achieved by introducing two important modifications in the commonly used oleic acid based synthesis. First, the shell was prepared via anewly developed method characterized by a very low nucleation rate for particles of pure LiYF4 shell material. Second, anhydrous acetates were used as precursors and additional drying steps were applied to reduce the incorporation of OH− in the crystal lattice, known to quench the emission of Yb3+ ions. Excitation power density (P)-dependent absolute measurements of the upconversion luminescence quantum yield (Φ,UC) of LiYF4:Yb,Er/LiYF4 core/shell particles reveal a maximum value of 1.25% at P of 180 W·cm−2.
Although lower than the values reported for NaYF4:18%Yb,2%Er core/shell nanocrystals with comparable sizes, these Φ, UC values are the highest reported so far for LiYF4:18%Yb,2%Er/LiYF4 nanocrystals without additional dopants. Further improvements May nevertheless be possible by optimizing the dopant concentrations in the LiYF4 nanocrystals.
KW - Nano
KW - Crystal
KW - Quantum yield
KW - LiYF4
KW - Synthesis
KW - Lifetime
KW - Fluorescence
KW - NIR
KW - Photoluminescence
KW - Lanthanide
KW - Upconversion nanoparticle
KW - Nanomaterial
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-515395
DO - https://doi.org/10.1007/s12274-020-3116-y
SN - 1998-0124
VL - 14
IS - 3
SP - 797
EP - 806
PB - Springer
AN - OPUS4-51539
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Quantifying functional groups and coatings on nanoobjects
N2 - Engineered nanomaterials (NM) of different size, shape, chemical composition, and surface chemistry are increasingly used for many key technologies of the 21st century and consumer products. This includes polymer and silica or silica-coated nanoparticles (NP) with covalently bound surface groups, semiconductor quantum dots (QD), metal and metal oxide NP, and lanthanide NP with coordinatively or electrostatically bound ligands, as well as surface-coated nanostructures like micellar encapsulated NP. Decisive for most applications of NMs are their specific surface properties, which are largely determined by the chemical nature and amounts of ligands and functional groups (FGs) on the NM surface. The surface chemistry can strongly affect the physicochemical properties of NM, their charge, hydrophilicity/hydrophobicity, reactivity, function, stability, and processability and thereby their impact on human health and environment. Knowledge of NM surface chemistry plays an important role for NM functionality and performance in (bio)applications and the fate, exposure, dissolution, transformation, and accumulation of NM, and thus, the potential risks for human health and the environment. This highlights the importance of reliable, validated, and eventually standardized analytical methods for analyzing and quantifying NM surface chemistry for process and quality control of NM production, safe use of NMs, design of novel NM, and sustainable concepts for NM fabrication.[1-3] In this context, interlaboratory comparisons (ILCs) are needed to assess method reliability and reference materials with known surface chemistries for establishing surface analytical methods and their performance validation.[2,4] Also, to respond to the increasing number of samples to be analyzed, cost-efficient automation concepts for surface analysis are needed that can be realized with affordable and preferably commercial instrumentation.[5] Here, we provide an overview of analytical methods for FG analysis and quantification used by us for quantifying broadly utilized FGs and ligands on different types of NMs with electrochemical titration methods, optical assays, nuclear magnetic resonance (NMR) and vibrational (IR) spectroscopy, and X-ray based and thermal analysis methods.[1,2] Thereby, method- and material-related challenges are addressed, and the importance of multi-method characterization approaches easing method validation by method cross-validation. Special emphasis is dedicated to simple, versatile, and cost-efficient methods such as optical assays and electrochemical titration methods.
T2 - eMRS Fall Meeting 2025
CY - Warsaw, Poland
DA - 15.09.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Characterization
KW - Advanced material
KW - Surface
KW - Standardization
KW - Reference material
KW - Functional group
KW - Quantification
KW - Coating
KW - Interlaboratory comparison
KW - Uncertainty
PY - 2025
AN - OPUS4-64183
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Assessing different types of silica networks for the complete protection of nir luminescent molecular rubies from oxygen quenching in air
N2 - The application of emerging luminophores such as near-infrared (NIR) emissive earth-abundant chromium(III) (CrIII) complexes and triplet-triplet annihilation upconversion (TTA-UC) systems in air as optical reporters for bioimaging or photonic materials for energy conversion requires simple and efficient strategies for their complete protection from luminescence quenching by oxygen. Therefore, we explored the influence of sol-gel synthesis routes on the oxygen protection efficiency of the resulting core and core/shell silica nanoparticles (SiO2 NPs), utilizing the molecular ruby-type luminophores CrPF6 ([Cr(ddpd)2](PF6)3; ddpd = N,N’-dimethyl- N,N’-dipyridin-2-ylpyridin-2,6-diamine) and CrBF4 ([Cr(ddpd)2](BF4)3) with their oxygen-dependent, but polarity-, proticity-, viscosity-, and concentration-independent luminescence as optical probes for oxygen permeability. The sol-gel chemistry routes we assessed include the classical Stöber method and the underexplored larginine approach, which relies on the controlled hydrolysis of tetraethoxysilane (TEOS) in a biphasic cyclohexane/water system with the catalyst l-arginine. As demonstrated by luminescence measurements of air- and argon-saturated dispersions of CrPF6- and CrBF4-stained SiO2 NPs of different size and particle architecture, utilizing the luminescence decay kinetics of argon-saturated solutions of CrPF6 and CrBF4 in acetonitrile (ACN) as benchmarks, only SiO2 NPs or shells synthesized by the l-arginine approach provided complete oxygen protection of the CrIII complexes under ambient conditions. We ascribe the different oxygen shielding efficiencies of the silica networks explored to differences in density and surface chemistry of the resulting nanomaterials and coatings, leading to different oxygen permeabilities. Our l-arginine based silica encapsulation strategy can open the door for the efficient usage of oxygen-sensitive luminophores and TTA-UC systems as optical reporters and spectral shifters in air in the future.
T2 - eMRS Strasbourg
CY - Strasbourg, France
DA - 26.05.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Quantum yield
KW - NIR
KW - Mechanism
KW - Characterization
KW - Electron microscopy
KW - Silica
KW - Oxygen sensing
KW - Surface
KW - Doping
KW - Lifetime
KW - Cr(III) complex
PY - 2025
AN - OPUS4-63300
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Getting it right with photoluminescence quantum yields of molecular and nanoscale luminophores and luminescent particles
N2 - Photophysical and mechanistic studies, the comparison of different emitter classes, and the rational design of the next generation of molecular and nanoscale reporters require quantitative photoluminescence measurements and the reliable determination of the key performance parameter photoluminescence quantum yield (QY), i.e., the number of emitted per absorbed photons. This is of special importance for all photoluminescence applications in the life and material sciences in the UV/vis/NIR/SWIR. To improve the reliability and comparability of photoluminescence and QY measurements across laboratories, pitfalls, achievable uncertainties, and material-specific effects related to certain emitter classes must be explored. Also, suitable protocols and reference materials are needed which have been validated in interlaboratory comparisons for different wavelength regions and transparent and scattering luminophores.[1] Based on absolute and relative photoluminescence measurements of functional dyes and nanomaterials like semiconductor quantum dots and rods, spectrally shifting lanthanide upconversion nanocrystals, perovskites, and YAG:Cer converter materials, reliable methods for determining QY of transparent and scattering luminophores, nonlinear emitters, and solid luminescent nanomaterials have been developed.[2,3] Thereby, material- and method-related uncertainties of relative and absolute QY measurements and achievable uncertainties could be quantified for linear and nonlinear UV/vis/NIR/SWIR emitters and lately for also luminescent and scattering materials and solid phoshors, here in an interlaboratory comparison of three labs utilizing integrating sphere spectroscopy.[4,5] In addition, to provide simple tools for a better comparability of QY measurements, recently, a first set of UV/vis/NIR quantum yield standards has been developed and certified with complete uncertainty budgets.[6] In the following, the outcome of these studies will be presented, thereby addressing common pitfalls and providing recommendations on the performance of reliable QY measurements of linear and non-linear emitters in transparent, scattering, and solid samples.
T2 - 29th Lecture Conference on Photochemistry (LCP 2024) GDCh
CY - Mainz, Germany
DA - 16.09.2024
KW - Nanoparticle
KW - Nano
KW - Luminescence
KW - Quality assurance
KW - Synthesis
KW - Standardization
KW - Reference material
KW - Quantum yield
KW - Fluorescence
KW - Reference data
KW - Integrating sphere spectroscopy
KW - ILC
KW - Converter material
KW - YAG:Ce
KW - Optoceramic
PY - 2024
AN - OPUS4-61075
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Biesen, L.
A1 - Nirmalananthan-Budau, Nithiya
A1 - Hoffmann, Katrin
A1 - Resch-Genger, Ute
A1 - Müller, T. J. J.
T1 - Solid-State Emissive Aroyl-S,N-Ketene Acetals with Tunable
N2 - N-Benzyl aroyl-S,N-ketene acetals can be readily synthesized by condensation of aroyl chlorides and N-Benzyl 2-methyl benzothiazolium salts in good to excellent yields, yielding a library of 35 chromophores with bright solid-state emission and aggregation-induced emission characteristics.
Varying the substituent from electron-donating to electronwithdrawing enables the tuning of the solid-state emission Color from deep blue to red.
KW - Nano
KW - Nanoparticle
KW - Photoluminescence
KW - Fluorescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - dye
KW - Enhancement
KW - Particle
KW - Polarity
KW - AIE
KW - Aggregation
KW - Aggregation-induced emission
KW - Solid state emission
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509072
DO - https://doi.org/10.1002/anie.201916396
VL - 59
IS - 25
SP - 10037
EP - 10041
PB - Wiley Online Libary
AN - OPUS4-50907
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Denißen, M.
A1 - Hannen, R.
A1 - Itskalov, D.
A1 - Biesen, L.
A1 - Nirmalananthan-Budau, Nithiya
A1 - Hoffmann, Katrin
A1 - Reiss, G. J.
A1 - Resch-Genger, Ute
A1 - Müller, T. J. J.
T1 - One-pot synthesis of a white-light emissive bichromophore operated by aggregation-induced dual emission (AIDE) and partial energy transfer
N2 - Merocyanine–triarylamine bichromophores are readily synthesized by sequentially Pd-catalyzed insertion alkynylation–Michael–Suzuki four-component reactions. White-light emissive systems form upon aggregation in 1 : 99 and 0.1 : 99.9 vol% CH2Cl2–cyclohexane mixtures, ascribed to aggregation-induced dual emission (AIDE) in combination with partial energy transfer between both chromophore units as supported by spectroscopic studies.
KW - Energy transfer
KW - Nano
KW - Nanoparticle
KW - Photoluminescence
KW - Fluorescence
KW - Quantum yield
KW - Photophysics
KW - Lifetime
KW - Sensor
KW - Dye
KW - Enhancement
KW - Particle
KW - Polarity
KW - AIE
KW - Aggregation
KW - Aggregation-induced emission
KW - Solid state emission
KW - Merocyanine
PY - 2020
DO - https://doi.org/10.1039/d0cc03451g
VL - 56
IS - 54
SP - 7407
PB - Royal Society of Chemistry
AN - OPUS4-50936
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Biesen, L.
A1 - May, L.
A1 - Nirmalananthan-Budau, Nithiya
A1 - Hoffmann, Katrin
A1 - Resch-Genger, Ute
A1 - Müller, T. J. J.
T1 - Communication of Bichromophore Emission upon Aggregation – Aroyl-S,N-ketene Acetals as Multifunctional Sensor Merocyanines
N2 - Aroyl-S,N-ketene acetal-based bichromophores can be readily synthesized in a consecutive three-component synthesis in good to excellent yields by condensation of aroyl chlorides and an N-(p-bromobenzyl) 2-methyl benzothiazolium salt followed by a Suzuki coupling, yielding a library of 31 bichromophoric fluorophores with substitution patterntunable emission properties. Varying both chromophores enables different communication pathways between the chromophores, exploiting aggregation-induced emission (AIE) and energy transfer (ET) properties, and thus, furnishing aggregation-based fluorescence switches. Possible applications range from fluorometric analysis of alcoholic beverages to pH sensors.
KW - Dye
KW - Fluorescence
KW - Aggregation induced emission
KW - Signal enhancement
KW - Energy transfer
KW - Switch
KW - Sensor
KW - Quantum yield
KW - Lifetime
KW - Photophysics
KW - Synthesis
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-531123
DO - https://doi.org/10.1002/chem.202102052
VL - 27
IS - 53
SP - 13426
EP - 13434
PB - Wiley-VCH
AN - OPUS4-53112
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Frenzel, F.
A1 - Fiedler, S.
A1 - Bardan, A.
A1 - Güttler, Arne
A1 - Würth, Christian
A1 - Resch-Genger, Ute
T1 - Influence of Measurement Geometry and Blank on Absolute Measurements of Photoluminescence Quantum Yields of Scattering Luminescent Films
N2 - For a series of 500 μm-thick polyurethane films containing different concentrations of luminescent and scattering YAG:Ce microparticles, we systematically explored and quantified pitfalls of absolute measurements of photoluminescence quantum yields (Φf) for often employed integrating sphere (IS) geometries, where the sample is placed either on a sample holder at the bottom of the IS surface or mounted in the IS center. Thereby, the influence of detection and illumination geometry and sample position was examined using blanks with various scattering properties for measuring the number of photons absorbed by the sample. Our results reveal that (i) setup configurations where the scattering sample is mounted in the IS center and (ii) transparent blanks can introduce systematic errors in absolute Φf measurements.
For strongly scattering, luminescent samples, this can result in either an under- or overestimation of the absorbed photon flux and hence an under- or overestimation of Φf. The size of these uncertainties depends on the scattering properties of the sample and instrument parameters, such as sample position, IS size, wavelength-dependent reflectivity of the IS surface coating, and port configuration. For accurate and reliable absolute Φf measurements, we recommend (i) a blank with scattering properties closely matching those of the sample to realize similar distributions of the diffusely scattered excitation photons within the IS, and (ii) a sufficiently high sample absorption at the excitation wavelength. For IS setups with center-mounted samples, measurement geometries should be utilized that prevent the loss of excitation photons by reflections from the sample out of the IS.
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Quantum yield
KW - Characterization
KW - Silica
KW - Scattering
KW - Uncertainty
KW - Film
KW - Pphosphor
KW - YAG:Ce
KW - LED
KW - Converter material
KW - Solid material
KW - Polymer
KW - Composite material
KW - Advanced material
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-638304
DO - https://doi.org/10.1021/acs.analchem.4c06726
SN - 1520-6882
SP - 1
EP - 8
PB - ACS Publications
AN - OPUS4-63830
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Güttler, Arne
T1 - Certified Reference Materials for the Quantification and Standardization of Fluorescence-based Measurements
N2 - The size and shape of photoluminescence signals is affected by wavelength-, polarization-, and time-dependent instrumentspecific contributions and the compound- and environment-specific photoluminescence quantum yield. The former hamper the comparability of fluorescence measurements performed on different measuring devices. The commonly relatively done determination of the performance parameter requires suitable quantum yield standards with well-known. The performance of such measurements is, e.g., described in the written standard IEC 62607 currently revised.
T2 - Colloquium für Optische Spektrometrie 2025
CY - Jena, Germany
DA - 24.09.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Advanced material
KW - Calibration
KW - Characterization
KW - Fluorescence quantum yield
KW - Phosphor
KW - Absolute
KW - Integrating sphere spectroscopy
KW - Dye
KW - Standardization
KW - Reference material
KW - Interlaboratory comparison
KW - Uncertainty
PY - 2025
AN - OPUS4-64213
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Xu, R.
A1 - Teich, W.
A1 - Frenzel, Florian
A1 - Hoffmann, Katrin
A1 - Radke, J.
A1 - Rösler, J.
A1 - Faust, K.
A1 - Blank, A.
A1 - Brandenburg, S.
A1 - Misch, M.
A1 - Vajkoczy, P.
A1 - Onken, J. S.
A1 - Resch-Genger, Ute
T1 - Optical characterization of sodium fluorescein in vitro and ex vivo
N2 - Objective: The utilization of fluorescein-guided biopsies and resection has been recently discussed as a suitable strategy to improve and expedite operative techniques for the resection of central nervous system (CNS) tumors. However, little is known about the optical properties of sodium fluorescein (NaFl) in human tumor tissue and their potential impact on ex vivo analyses involving fluorescence-based methods.
Methods: Tumor tissue was obtained from a study cohort of an observational study on the utilization of fluorescein-guided biopsy and resection (n=5). The optical properties of fluorescein-stained tissue were compared to the optical features of the dye in vitro and in control samples consisting of tumor tissue of high-grade glioma patients (n=3) without intravenous (i.v.) application of NaFl. The dye-exposed tumor tissues were used for optical measurements to confirm the detectability of NaFl emission ex vivo. The tissue samples were fixed in 4%PFA, immersed in 30% sucrose, embedded in Tissue-Tek OCT compound, and cut to 10 mm cryosections. Spatially resolved emission spectra from tumor samples were recorded on representative slides with a Confocal Laser Scanning Microscope FV1000 (Olympus GmbH, Hamburg, Germany) upon excitation with lexc = 488 nm.
Results: Optical measurements of fluorescein in 0.9% sodium chloride (NaCl) under in vitro conditions showed an absorption maximum of lmax abs = 479 nm as detected with spectrophotometer Specord 200 and an emission peak at lmax em = 538 nm recorded with the emCCD detection system of a custom-made microscope-based single particle setup using a 500 nm long-pass filter. Further measurements revealed pH- and concentration-dependent emission spectra of NaFl. Under ex vivo conditions, confocal laser scanning microscopy of fluorescein tumor samples revealed a slight bathochromic shift and a broadening of the emission band.
Conclusion: Tumor uptake of NaFl leads to changes in the optical properties – a bathochromic shift and broadening of the emission band – possibly caused by the dye’s high pH sensitivity and concentration-dependent reabsorption acting as an innerfilter of the dye’s emission, particularly in the short wavelength region of the Emission spectrum where absorption and fluorescence overlap. Understanding the ex vivo optical properties of fluorescein is crucial for testing and validating its further applicability as an optical probe for intravital microscopy, immunofluorescence localization studies, and flow cytometry analysis.
KW - Fluorescence
KW - Optical probe
KW - Sensor
KW - Fluorescein
KW - PH
KW - Imaging
KW - Tissue
KW - Cancer
KW - Medical diagnostics
KW - Tumor
KW - In vivo
KW - Ex vivo
KW - Quantum yield
KW - Dye
KW - Quality assurance
KW - Microscopy
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527843
DO - https://doi.org/10.3389/fonc.2021.654300
SN - 2234-943X
VL - 11
SP - 1
EP - 8
PB - Frontiers Media
CY - Lausanne
AN - OPUS4-52784
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Quantifying the total and accessible amount of surface functionalities and ligands on nanomaterials
N2 - Engineered nanomaterials (NMs) of various chemical composition and surface functionalization are routinely fabricated for industrial applications such as medical diagnostics, drug delivery, sensing, catalysis, energy conversion and storage, opto-electronics, and information storage. NM dispersibility, stability, processability, and function as well as the interaction with biological species and environmental fate are largely determined by NM surface functionalities, i.e., functional groups (FGs) and ligands. Therefore, reliable, reproducible, and eventually standardized surface characterization methods are vital for quality control of NMs, and mandatory to meet increasing concerns regarding their safety.
Suitable methods for determining surface functionalities on ligand-stabilized core and core/shell NPs include advanced techniques such as traceable quantitative nuclear magnetic resonance (qNMR) as well as X-ray electron spectroscopy (XPS) and time of flight secondary ion mass spectrometry (ToF-SIMS), and simpler optical and electrochemical methods.[1] The latter less costly and fast methods, which can be automated, are often used by NM producers for process and quality control.[1,2] To validate methods, establish measurement uncertain-ties, test reference materials, and produce reference data, multi-method characterization studies are needed.[3,4] as well as interlaboratory comparisons (ILC) on determining NM surface chemistry and well characterized test and reference NMs providing benchmark values.[5,6] Here, we present examples for quantifying common surface FGs such as amino and carboxyl groups on functional NMs of different chemical composition such as silica, polymer, iron oxide, and lanthanide-based upconversion nanoparticles with optical assays, electrochemical titration methods, qNMR, and chromatographic separation techniques. In addition, ongoing interlaboratory comparisons will be presented.
T2 - Yucomat 2025
CY - Herec Novi, Montenegro
DA - 01.09.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Characterization
KW - Advanced material
KW - Surface
KW - Standardization
KW - Reference material
KW - Functional group
KW - Quantification
KW - Coating
KW - Interlaboratory comparison
KW - Uncertainty
PY - 2025
AN - OPUS4-64182
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Measurements of Photoluminescence Quantum Yields of Scattering LED Converter Materials
N2 - How to Get it Right with the Absolute Measurement of Photoluminescence Quantum Yields of Scattering LED Converter Materials Saskia Fiedler+,a, Florian Frenzel+,a, Christian Würth a, Isabella Tavernaro a, Michelle Grüne c, Stefan Schweizer c,d, Axel Engel e, and Ute Resch-Genger a* a Division Biophotonics, Federal Institute for Materials Research and Testing (BAM), Richard-Willstaetter-Strasse 11, D-12489 Berlin, Germany; email: ute.resch@bam.de b Present address: Photonic Materials, NWO-Institute AMOLF, Science Park 104, 1098 XG Amsterdam, The Netherlands c Faculty of Electrical Engineering, South Westphalia University of Applied Sciences, Lübecker Ring 2, 59494, Soest, Germany d Fraunhofer Application Center for Inorganic Phosphors, Branch Lab of Fraunhofer Institute for Microstructure of Materials and Systems IMWS, Lübecker Ring 2, 59494, Soest, Germany e Schott AG Technical Services, Hattenbergstrasse 10, D-55122 Mainz, Germany Optical measurements of scattering materials such as luminescent nano- and microparticles and phosphors dispersed in liquid and solid matrices play an important role in energy conversion, solid-state lighting, medical diagnostics, and security barcoding. A key performance parameter is the photoluminescence quantum yield QY, i.e., the number of emitted per number of absorbed photons. QY of transparent luminophore solutions can be obtained relative to a fluorescence QY standard of known QY, meanwhile available as certified reference materials.[1] The determination of QY of scattering liquid and solid samples like nanoparticle dispersions, phosphors, and optoceramics requires, however, absolute measurements with an integrating sphere setup. Despite the need for reliable absolute QY measurements, no interlaboratory comparison (ILCs) on measurement uncertainties has been performed and scattering standards with known QY are not available. We present the results of an ILC of 3 labs from academia and industry on measurements of transparent and scattering dye solutions and solid phosphors and converter materials like YAG:Ce optoceramics with commercial stand-alone integrating sphere setups of different illumination and detection geometries. Special emphasis was dedicated to the influence of measurement geometry, optical properties of the blank for determining the number of incident photons absorbed by the sample, and sample-specific surface roughness. Matching QY values could be obtained for transparent dye solutions and scattering dispersions with a blank with scattering properties closely matching those of the sample, QY measurements of optoceramic samples with different blanks revealed substantial differences of more than 20 %. Based on our data, we recommend non-absorbing blank materials with a high reflectivity (>95 %) such as a 2 mm-thick PTFE target placed on the sample holder as blanks.
T2 - eMRS
CY - Strasbourg, France
DA - 26.05.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Quantum yield
KW - NIR
KW - Characterization
KW - Electron microscopy
KW - Film
KW - Integrating sphere spectroscopy
KW - Calibration
KW - Lifetime
KW - Advanced materials
KW - LED converter
KW - YAG:Ce
KW - ILC
KW - Measurement uncertainty
KW - Absolute quantum yield
PY - 2025
AN - OPUS4-63327
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Forschung in einer Bundesoberbehörde wie der BAM
N2 - Die Bundesanstalt für Materialforschung und -prüfung (BAM) ist eine forschende Bundesoberbehörde und Einrichtung der Ressortforschung der Bundesrepublik Deutschland. Unter ihrer Leitlinie „Sicherheit in Technik und Chemie“ ist sie zuständig für die öffentliche technische Sicherheit und für metrologische Aufgaben in der Chemie. Das Aufgabenspektrum der BAM, das sich an aktuellen Fragestellungen aus Wissenschaft, Wirtschaft, Politik und Normung orientiert, bietet sehr viele interessante Tätigkeitsfelder für Naturwissenschaftler*Innen und Ingenieur*Innen.
T2 - WIFO Leipzig 2023
CY - Leipzig, Germany
DA - 05.09.2023
KW - Quality assurance
KW - Optical spectroscopy
KW - Certification
KW - Reference product
KW - Integrating sphere spectroscopy
KW - Fluorescence
KW - Quantum yield
KW - Reference material
KW - Reference data
KW - Traceability
KW - Nano
KW - Particle
KW - Analytical chemistry
KW - Sensor
KW - Safety
PY - 2023
AN - OPUS4-58397
LA - mul
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tavernaro, Isabella
T1 - pH- and O2-Responsive Nanoparticles – The MiGraGen Project
N2 - In recent years, the demand for reliable, versatile, fluorescent pH and oxygen sensors has increased rapidly in many biomedical applications since these analytes are important indicators of cell function or certain diseases. Therefore, sensor particles are needed that are small enough to penetrate cells, non-toxic, and allow for close-up optical monitoring. When developing such sensor systems, one must consider the pH and oxygen range detectable by the sensor dye and the matrix material of the used carrier particles. Here, we present the development of pH- and oxygen-responsive polymeric beads functionalized with fluorescent dyad molecules that consist of an analyte-responsive fluorophore and an analyte-inert dye.
T2 - MiGraGen Project Meeting 09.08.2023
CY - Online Meeting
DA - 09.08.2023
KW - Nano- and microsensors
KW - Functionalized silica and polymeric particles
KW - pH sensing
KW - Oxygen sensing
KW - Fluorescence
PY - 2023
AN - OPUS4-58071
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescence Encoding of Polymer Microbeads during Polymerization
N2 - Differently sized, luminescent polymer beads encoded with QDs were prepared with a simple, optimized procedure. The optical properties of the resulting particles were studied to ensure sufficient fluorescence and to evaluate the influence of the polymerization on QD fluorescence.
T2 - 84th Prague Meeting on Macromolecules - Frontiers of Polymer Colloids
CY - Prague, Czech Republic
DA - 24.07.2022
KW - Polymerization
KW - Fluorescence
KW - Quantum dots
KW - Microbeads
PY - 2022
AN - OPUS4-55447
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kage, Daniel
A1 - Hoffmann, Katrin
A1 - Borcherding, H.
A1 - Schedler, U.
A1 - Resch-Genger, Ute
T1 - Lifetime encoding in flow cytometry for bead‑based sensing of biomolecular interaction
N2 - To demonstrate the potential of time-resolved flow cytometry (FCM) for bioanalysis, clinical diagnostics, and optically encoded bead-based assays, we performed a proof-of-principle study to detect biomolecular interactions utilizing fluorescence lifetime (LT)-encoded micron-sized polymer beads bearing target-specific bioligands and a recently developed prototype lifetime flow cytometer (LT-FCM setup). This instrument is equipped with a single excitation light source and different fluorescence detectors, one operated in the photon-counting mode for time-resolved measurements of fluorescence decays and three detectors for conventional intensity measurements in different spectral windows. First, discrimination of bead-bound biomolecules was demonstrated in the time domain exemplarily for two targets, Streptavidin (SAv) and the tumor marker human chorionic gonadotropin (HCG). In a second step, the determination of biomolecule concentration levels was addressed representatively for the inflammation-related biomarker tumor necrosis factor (TNF-α) utilizing fluorescence intensity measurements in a second channel of the LT-FCM instrument. Our results underline the applicability of LT-FCM in the time domain for measurements of biomolecular interactions in suspension assays. In the future, the combination of spectral and LT encoding and multiplexing and the expansion of the time scale from the lower nanosecond range to the longer nanosecond and the microsecond region is expected to provide many distinguishable codes. This enables an increasing degree of multiplexing which could be attractive for high throughput screening applications.
KW - Fluorescence
KW - Sensor
KW - Assay
KW - Protein
KW - Multiplexing
KW - Flow cytometry
KW - Barcoding
KW - Lifetime
KW - Dye
KW - Bead
KW - Bead-based assay
KW - Method
KW - Quantification
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-516007
DO - https://doi.org/10.1038/s41598-020-76150-x
VL - 10
IS - 1
SP - 19477
PB - Nature
AN - OPUS4-51600
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Srivastava, Priyanka
A1 - Fürstenwerth, Paul Christian
A1 - Witte, J. F.
A1 - Resch-Genger, Ute
T1 - Synthesis and spectroscopic characterization of a fluorescent phenanthrene-rhodamine dyad for ratiometric measurements of acid pH values
N2 - We present the rational design, synthesis and spectroscopic characterization of a novel dual excitation, three color emitting, pH-responsive fluorescent probe consisting of two phenanthrene and one rhodamine B units linked by click chemistry. The rhodamine moiety, excitable at λEx = 315 nm and at λEx = 560 nm in its ring-opened form, provides the pH-responsive fluorophore, while the pH-insensitive phenanthrene, excited at λEx = 315 nm, serves as inert internal reference, The presence of two phenanthrene moieties enables a blue monomer and a blueish green excimer emission at 351 nm and 500 nm, respectively. Opening of the rhodamine B spirolactam ring at an acidic pH below 5.0 (pKa = 2.59 ± 0.04) switches on its emission at 580 nm. Simultaneously, the phenanthrene excimer emission decreases caused by a change in orientation of the phenanthrene units, while the monomer emission is barely affected. This sensor design enables ratiometric measurements in the low acidic pH range utilizing the intensity ratios of the rhodamine B and phenanthrene excimer emission at 580 nm and 500 nm. Alternatively, also the intensity ratios of the rhodamine B and the phenanthrene monomer emission could be exploited or the sum of the phenanthrene monomer and excimer fluorescence. To the best of our knowledge, this is the first report of ratiometric sensing utilizing such a versatile type of tricolor emissive dyad probe bearing phenanthrene moieties and showing phenanthrene monomer and excimer emission.
KW - Fluorescence
KW - Optical probe
KW - Sensor
KW - Dye
KW - Rhodamine
KW - Synthesis
KW - Photophysics
KW - PH
KW - Quantum yield
KW - Quality assurance
KW - Mechanism
KW - Chemodosimeter
KW - Phenanthrene
KW - Ratiometric
KW - Dyad
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530554
DO - https://doi.org/10.1039/d1nj01573g
SN - 1144-0546
VL - 45
IS - 31
SP - 13755
EP - 13762
PB - Royal Society of Chemistry
AN - OPUS4-53055
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - GEN
A1 - Resch-Genger, Ute
A1 - Richter, Maria
A1 - Güttler, Arne
A1 - Pauli, Jutta
A1 - Vogel, K.
A1 - Homann, Christian
A1 - Würth, Christian
T1 - Extending Certified Spectral Fluorescence Standards for the Calibration and Performance Validation of Fluorescence Instruments to the NIR – Closing the Gap from 750 nm to 940 nm with Two Novel NIR Dyes
N2 - Fluorescence methods provide spectral, intensity, polarization, and lifetime information, which contain sample- and instrument-specific contributions. Fluorescence data, comparable across instruments and laboratories, require validated calibration procedures and certified fluorescence standards.
KW - Quality assurance
KW - Reference material
KW - Fluorescence
KW - Dye
KW - Traceability
KW - Metrology
KW - Calibration
KW - Reference data
KW - Reference product
KW - Digital certificate
KW - NIR
KW - Instrument performance validation
PY - 2025
SP - 1
EP - 4
PB - Springer Nature
CY - London
AN - OPUS4-62739
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wasternack, J.
A1 - Schröder, H. V.
A1 - Witte, J. F.
A1 - Ilisson, M.
A1 - Hupatz, H.
A1 - Hille, J. F.
A1 - Gaedke, M.
A1 - Valkonen, A. M.
A1 - Sobottka, S.
A1 - Krappe, A.
A1 - Schubert, M.
A1 - Paulus, B.
A1 - Rissanen, K.
A1 - Sarkar, B.
A1 - Eigler, S.
A1 - Resch-Genger, Ute
A1 - Schalley, C. A.
T1 - Switchable protection and exposure of a sensitive squaraine dye within a redox active rotaxane
N2 - In nature,molecular environments in proteins can sterically protect and stabilize reactive species such as organic radicals through non-covalent interactions.Here, wereport a near-infrared fluorescent rotaxane in which the stabilization of a chemically labile squaraine fluorophore by the coordination of a tetralactam macrocycle can be controlled chemically and electrochemically. The rotaxane can be switched between two co-conformations inwhich thewheel either stabilizes or exposes the fluorophore. Coordination by the wheel affects the squaraine’s stability across four redox states and renders the radical anion significantly more stable—by a factor of 6.7—than without protection by a mechanically bonded wheel. Furthermore, the fluorescence properties can be tuned by the redox reactions in a stepwise manner. Mechanically interlockedmolecules provide an excellent scaffold to stabilize and selectively expose reactive species in a co-conformational switching process controlled by external stimuli.
KW - Fluorescence
KW - Dye
KW - Sensor
KW - Quantum yield
KW - Spectroscopy
KW - Photophysics
KW - Synthesis
KW - Squaraine
KW - Switch
KW - Redox-active
KW - Rotaxane
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-614959
DO - https://doi.org/10.1038/s42004-024-01312-1
VL - 7
SP - 1
EP - 11
AN - OPUS4-61495
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Ramirez, Alejandra
A1 - Pauli, Jutta
A1 - Crasselt, C.
A1 - Simon, S.
A1 - Schmidt, W.
A1 - Resch-Genger, Ute
T1 - The effect of a polycarboxylate ether on C3A / CaSO4.2H2O passivation monitored by optical spectroscopy
N2 - Polycarboxylate ethers (PCEs) are widely used in construction, but the exact nature of their interaction with cement is still debated. Aiming at a better understanding of the role of tricalcium Aluminate (C3A) in cement hydration, we assessed the potential of optical spectroscopy in combination with a water-soluble fluorescent organic reporter dye (S0586) to monitor the early hydration of C3A in the presence of 26 wt% CaSO4.2H2O (C3A26G-S) with and without PCE. As optical methods, steady-state fluorescence and diffuse reflectance (UV–VisDR) spectroscopy were employed. Phase characterization and particle size distribution were performed with in-situ X-ray diffraction (in-situ XRD) and dynamic light scattering (DLS). Our results show that fluorescence and UV–VisDR spectroscopy can be used to monitor the formation of metastable phases by the disaggregation of the dye S0586 in a cement paste as well as changes in ettringite formation. Addition of PCE slowed down the disaggregation of the dye as reflected by the corresponding changes of the dyes absorption and fluorescence. This prolonged induction period is a well-known side effect of PCEs and agrees with previous reported calorimetric studies and the Inhibition of gypsum dissolution observed by in-situ XRD. This demonstrates that fluorescence and UV–VisDR spectroscopy together with a suitable optical probe can provide deeper insights into the influence of PCE on C3A-gypsum hydration which could be e.g., utilized as screening method for comparing the influences
of different types of PCEs.
KW - Fluorescence
KW - Cement
KW - Nano
KW - Particle
KW - Optical spectroscopy
KW - PCE
KW - XRD
KW - Calorimetry
KW - Monitoring
KW - Diffuse
KW - Reflection
KW - Phase
KW - Dye
KW - Optical probe
KW - Cyanine
KW - Sensor
KW - Method
KW - Analysis
PY - 2020
DO - https://doi.org/10.1016/j.conbuildmat.2020.121856
VL - 270
SP - 121856
PB - Elsevier Ltd.
AN - OPUS4-52118
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hudson, A.D.
A1 - Jamieson, O.
A1 - Crapnell, R.D.
A1 - Rurack, Knut
A1 - Soares, T.C.C.
A1 - Mecozzi, F.
A1 - Laude, A.
A1 - Gruber, J.
A1 - Novakovic, K.
A1 - Peeters, M.
T1 - Dual detection of nafcillin using a molecularly imprinted polymer-based platform coupled to thermal and fluorescence read-out
N2 - Reported here is the production of molecularly imprinted polymer (MIP) films, integrating a fluorescent moiety that serves as both an element for template interaction and signalling, for the thermal and optical detection of the beta-lactam antibiotic nafcillin. Fluorescein methacrylate (FluMa) was synthesized and introduced during the molecular imprinting process as the sole monomer and in a 1 : 1 mixture with methacrylic acid (MAA), allowing to draw first conclusions on the MIP formation potential of such a rather large and rigid monomer. At first, MIP microparticles containing FluMa were prepared by free radical polymerisation. Optical batch rebinding experiments revealed that FluMa can act as a functional monomer for selective detection of nafcillin; however, the addition of MAA as co-monomer significantly improved performance. Subsequently, thin MIP films containing FluMa were deposited onto functionalised glass slides and the influence of porogen, drying time, and monomer composition was studied. These MIP-functionalised glass electrodes were mounted into a customised 3D-printed flow cell, where changes in the liquid were either evaluated with a thermal device or using fluorescence bright field microscopy. Thermal analysis demonstrated that multiple MIP layers enhanced sensor specificity, with detection in the environmentally relevant range. The fluorescence bright field microscope investigations validated these results, showing an increase in the fluorescence intensity upon exposure of the MIP-functionalised glass slides to nafcillin solutions. These are promising results for developing a portable sensor device that can be deployed for antibiotics outside of a dedicated laboratory environment, especially if sensor design and fluorophore architecture are optimised.
KW - Molecularly Imprinted Polymers
KW - Fluorescence
KW - Antibiotics
KW - Heat-transfer Measurements
KW - Thin films
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-540044
DO - https://doi.org/10.1039/D1MA00192B
VL - 2
IS - 15
SP - 5105
EP - 5115
PB - Royal Society of Chemistry
CY - Cambridge
AN - OPUS4-54004
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Prakash, Swayam
T1 - Development of a Rapid and Sensitive Fluorometric Detection Method for Urobilin Analysis for On-site Water Quality Assessment
N2 - The W.H.O. estimated that globally at least 2 billion people use drinking water sources contaminated with faeces and according to UNICEF, most of these faecal contaminants detection methods are expensive, time-consuming (18–24 h time to result), and, with few exceptions, not suited for on-site analysis. Hence, there is an urgent need for the development of rapid analytical methods that allow to unequivocally assess drinking water quality directly on-site. Our approach exploits the weak fluorescence of faecal biomarkers such as urobilin (UB), which is enhanced through complexation with Zn2+ in alcoholic media and is the basis of their detection/estimation, known as Schlesinger’s test.3 However, this method is associated with limitations, as the fluorescence of Zn2+ complexes of UB in water is weak, shows time dependent loss of emission intensity and has strong interference from humic substances that naturally present in surface waters. ,
To circumvent these issues and achieve the rapid and sensitive on-site detection of FPs, silane-functionalized glass fibre paper test strips were developed following the ‘drop-&-detect’ concept. Drop casting of water samples containing faecal contaminants like UB on specifically functionalized test strips allowed the sensitive detection with a smartphone coupled to a 3D printed optical setup. A series of silanes were used to functionalize glass fibre paper and tune its hydrophobicity, exploiting the influence of matrix tailoring to enhance binding of the Zn2+ salt used as co-reagent to bind UB for optimal fluorometric response. A detection spot was designed by the combination of hydrophilic and hydrophobic silanes with ZnCl2-impregnated test strips. This developed analytical method showed sensitive (nano- and sub-nanomolar concentration) response for UB detection. Furthermore, it can be successfully applied to the analysis of real water samples, allowing for the first time to test for faecal contamination in fresh water directly on-site using a smartphone in only a few minutes, instead of >10 h required for the current standard, i.e., lab-based bacterial tests.
T2 - 14th International Conference on Instrumental Methods of Analysis: Modern Trends and Applications
CY - Kefalonia, Greece
DA - 14.09.2025
KW - Faecal contamination
KW - Fluorescence
KW - Metal complexes
KW - Water analysis
KW - Optical and chemical sensing
KW - Spectroscopy
KW - Onsite analysis
KW - Rapid testing
PY - 2025
AN - OPUS4-64270
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Gawlitza, Kornelia
T1 - Using Dual Fluorescent Molecularly Imprinted Particles Coupled with a Miniaturized Opto-Microfluidic Platform for On-Site Detection of Perfluoroalkyl Carboxylic Acids
N2 - Per- and polyfluoroalkyl substances (PFAS) are a group of synthetic organofluorine chemicals widely used in the production of various materials, including firefighting foams, adhesives, and coatings that resist stains and oil. In recent years, PFAS have gained attention as emerging environmental contaminants, with particular emphasis on perfluoroalkyl carboxylic acids (PFCAs), the most common type of PFAS. PFCAs are defined by a fully fluorinated carbon chain and a charged carboxylic acid group. They have been classified as Substances of Very High Concern and included in the REACH Candidate List due to their persistence, resistance to biodegradation, and toxicological impacts.
Traditional methods for analyzing PFCAs, like GC-MS, HRMS, and HPLC-based techniques, are time-consuming, non-portable, expensive, and require specialized expertise. On the other hand, fluorescence assays offer a user-friendly, portable, and cost-effective alternative with high sensitivity and quick results, particularly when the binding of the analyte causes a specific increase in the probe’s fluorescence. Combining these probes with a carrier platform and a miniaturized optofluidic device presents a promising approach for PFCA monitoring.
In this study, a new guanidine BODIPY fluorescent indicator monomer was synthesized, characterized, and incorporated into a molecularly imprinted polymer (MIP) designed for the specific detection of perfluorooctanoic acid (PFOA). The MIP layer was formed on silica core nanoparticles doped with tris(bipyridine)ruthenium(II) chloride, serving as an optical internal reference for calibration-free assays. In combination with an extraction step prior to sample analysis, this system enables selective and reliable detection of PFCAs in surface water samples, minimizing interference from competing substances, matrix effects, and other factors. When integrated into an opto-microfluidic setup, the assay provided a compact, user-friendly detection system capable of detecting micromolar levels of PFOA in under 15 minutes from surface water samples.
T2 - ANAKON2025
CY - Leipzig, Germany
DA - 10.03.2025
KW - Perfluorooctanoic Acid (PFOA)
KW - On-site detection
KW - Fluorescence
KW - Microfluidics
KW - Molecularly Imprinted Polymers
PY - 2025
AN - OPUS4-62712
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Prakash, Swayam
T1 - Fluorescence Spectroscopy as an Analytical Tool for Rapid and Sensitive Faecal Pigments Detection: From Fundamentals to Onsite Applications
N2 - W.H.O estimated that globally at least 2 billion people use drinking water sources contaminated with faeces [1] and according to UNICEF, most of these faecal detection methods are expensive, time-consuming (18–24 h time to result),[2] and, with few exceptions, not suited for on-site analysis.[3] Hence, there is an urgent need for the development of analytical methods that allow to unequivocally test for drinking water quality directly on-site.
Today, microbial detection methods primarily targeting E. coli, the major faecal indicator bacteria, are still the prevalent methods for detecting faecal contamination of drinking and recreational waters. As an alternative, Schlesinger proposed the detection of urobilin (UB), a metabolic degradation product of haemoglobin occurring in all mammals, as faecal indicator pigment (FIP) through enhancement of its weak fluorescence by complexation with Zn2+ in alcoholic media already 120 years ago.[4] However, the major limitation of this method is the only weak enhancement of the intrinsically very weak UB fluorescence in aqueous media, requiring either the use of organic solvents or very sensitive instrumentation to reach the relevant detection limits, hampering the method’s use outside of a laboratory environment.[3]
In the present work, we addressed the shortcomings relying on interfacial and supramolecular chemistry as well as materials functionalization, transforming Schlesinger’s approach into a fluorometric ‘drop and detect’ assay using a smartphone coupled to a 3D-printed optical setup as a simple and portable device. A series of silanes were used to functionalize glass fibre paper and tune its hydrophobicity, exploiting the influence of matrix tailoring to enhance binding of the Zn salt used as co-reagent to UB for optimal fluorescence response. Combination of bis(2-hydroxyethyl)-3-aminopropyltriethoxysilane and N-octyltrimethoxysilane with ZnCl2-impregnated test strips showed the best response for sensitive (nano- and sub-nanomolar concentration) smartphone-based FIP detection. The obtained fluorescence sensing results were validated with a benchtop fluorometer. Furthermore, the developed analytical method was successfully applied to the analysis of real water samples, allowing for the first time to test for faecal water contamination directly on site in a very short time of few minutes.
T2 - Anakon 2025
CY - Leipzig, Germany
DA - 10.03.2025
KW - Faecal contamination
KW - Fluorescence
KW - Metal complexes
KW - Water analysis
KW - Optical and chemical sensing
PY - 2025
AN - OPUS4-62795
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Prakash, Swayam
T1 - Photophysical Understanding of Urobilin and its Zinc Complexes for Water Quality Testing
N2 - Faecal contaminants in water are considered serious threats for human health, due to the presence of viruses, bacteria and other harmful microorganisms.1 Urobilin (UB) is a well-known faecal pigment and can be used as a marker for faecal matter in water.2 UB is commonly present in the urine of all mammals as the catabolic end product of bilirubin degradation.2 As the only simple chemical approach to its detection, Schlesinger’s test is usually used to enhance the weak fluorescence of UB in alcoholic media by complexation with Zinc.2, 3 The major limitation of this method is the only weak enhancement of the intrinsically weak UB fluorescence in aqueous media.3 This work presents an approach to introduce different Zn salts for improved fluorescence response, where we found a clear dependence of the fluorescence yield of UB-Zn(II) complexes on the counterion of the salt in water. By employing a combination of fluorescence parameters like transition energy, fluorescence intensity, and fluorescence lifetime, a photophysical understanding of the structure and conformation of the UB-Zn(II) complexes responsible for the fluorescence enhancement in water could be gained. The possibilities of developing a sensitive analytical method based on the acquired understanding are also discussed.
T2 - Central European Conference on Photochemistry CECP 2024
CY - Bad Hofgastein, Austria
DA - 18.02.2024
KW - Water analysis
KW - Faecal contamination
KW - Metal complexes
KW - Fluorescence
PY - 2024
AN - OPUS4-59874
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Biyikal, Mustafa
T1 - Development of a handheld device for the trace detection of explosives
N2 - This presentation introduces a new explosives trace detector (ETD), a handheld device developed by True Detection Systems (TDS). Addressing the limitations of current handheld detectors—such as unreliable measurements and cumbersome operation— the new ETD XT-1 integrates advanced sensor technology, including a Lab-on-a-Chip, to deliver high sensitivity and accuracy. Capable of detecting trace levels of substances like TNT, TATP, and ammonium nitrate, the device offers rapid, user-friendly detection through AI/ML-enhanced algorithms. These algorithms enable precise substance identification by analyzing absorption and desorption rates, significantly reducing false positives. The XT-1 has broad applications in security, hazardous material detection, and environmental monitoring.
T2 - Photonics Days Berlin Brandenburg
CY - Berlin, Germany
DA - 09.10.2024
KW - Explosives
KW - Trace detection
KW - Handheld device
KW - Lab-on-a-chip
KW - Fluorescence
PY - 2024
AN - OPUS4-61433
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Homann, Christian
A1 - Peeters, Régis
A1 - Mirmajidi, Hana
A1 - Berg, Jessica
A1 - Fay, Michael
A1 - Rodrigues, Lucas Carvalho Veloso
A1 - Radicchi, Eros
A1 - Jain, Akhil
A1 - Speghini, Adolfo
A1 - Hemmer, Eva
T1 - Rapid microwave-assisted synthesis of morphology-controlled luminescent lanthanide-doped Gd2O2S nanostructures
N2 - Gadolinium oxysulfide (Gd2O2S) is an attractive material of demonstrated suitability for a variety of imaging applications, leveraging its magnetic, scintillating, and luminescent properties, particularly when doped with optically active lanthanide ions (Ln3+). For many of these applications, control over size and morphology at the nanoscale is crucial. This study demonstrates the rapid microwave-assisted Synthesis of colloidal Ln2O2S (Ln = Gd and dopants Yb, Er, Tb) nanostructures in as little as 20 min. Structural characterization using X-ray diffraction analysis (XRD), Raman spectroscopy, as well as Transmission electron microscopy (TEM), including elemental mapping via energy dispersive X-ray spectroscopy (EDS), unveiled the key role of elemental sulphur (S8) in the reaction mixtures for materials growth. By systematically varying the Ln-to-S ratio from 1 : 0.5 to 1 : 15, controlled morphologies ranging from triangular nanoplatelets to berry- and flower-like shapes were achieved. Doping with Er3+/Yb3+ endowed the nano-triangles with upconverting and near-infrared emitting properties. Tb3+-doped Gd2O2S exhibited the characteristic green Tb3+ emission under UV excitation, while also showing X-ray excited optical luminescence (XEOL), rendering the material interesting as a potential nano-scintillator.
KW - Upconversion
KW - Microwave-assisted synthesis
KW - Synthesis
KW - Fluorescence
KW - Nano
KW - Particle
KW - NIR
KW - XRD
KW - X-ray fluoressence
KW - Morphology control
KW - Raman
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-647907
DO - https://doi.org/10.1039/D5TC01646K
SN - 2050-7526
VL - 13
IS - 35
SP - 18492
EP - 18507
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-64790
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Rurack, Knut
T1 - Reaction-based BODIPY dyes as powerful tools in fluorescence sensing applications
N2 - The reversible analyte-induced switching between a colourless leuco form of a dye and its coloured all-π-conjugated form is one of the oldest concepts in probe- or indicator-based optical analysis,1 constituting so-called “one-color indicators”.2 In contrast to colour changes in the visible region, for which usually a bond-forming or a non-covalent interaction between a functional group on an indicator and an analyte is responsible, the extraordinarily large shifts of 150–250 nm seen for leuco-to-all-π-conjugated transformation are only possible when the reaction takes place directly at a site that is an intrinsic part of a dye’s π-system; the classic case are triphenylmethane dyes.3 Despite its obvious potential, this approach has not been a very popular area of scientific research for decades, perhaps because it is much more difficult to implement selectivity than by modifying terminal functional groups. However, in recent years, reaction-based fluorescence probes have attracted increasing attention by virtue of their superior sensitivity.4,5
Nowadays, rhodamines and fluoresceins are by far the most prominent groups of reaction-based indicators.5 They are usually switched between a colourless and non-fluorescent and a greenish-yellowish absorbing and yellowish-reddish emitting form. Typically, the coloured and fluorescent form is ionic, while the colourless form is neutral, reactions having mainly be designed to occur at the end groups of the xanthenoid π-system. BODIPY dyes, with their favourable spectroscopic and chemical properties as well as facile wavelength tunability features have only very recently been explored into this direction.6,7 Reaction at the core dipyrrin framework of these dyes led to strong colour and fluorescence modulations with potential applications in materials sciences6 and cell imaging.7 The present contribution will highlight the mechanisms at play and the sensing performance realized so far, and will compare core-reactive approaches to reaction-based signalling that involves π-extension of BODIPYs.8,9
T2 - 11th International Conference on Porphyrins and Phthalocyanines (ICPP-11)
CY - Online meeting
DA - 26.06.2021
KW - Indicators
KW - Fluorescence
KW - Sensing
KW - BODIPY Dyes
PY - 2021
AN - OPUS4-54001
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Jiang, Shan
A1 - Gawlitza, Kornelia
A1 - Rurack, Knut
T1 - Dual-Fluorescent Nanoparticle Probes Consisting of a Carbon Nanodot Core and a Molecularly Imprinted Polymer Shell
N2 - Dual-fluorescent molecularly imprinted nanoparticles with a red-emissive carbon nanodot-doped silica core and a chlorogenic acid-imprinted fluorescent polymer layer are prepared and their use in ratiometric fluorometric analysis is described. Nanoparticle probes consisting of a shielded and stably emitting core and a shell with embedded binding sites that indicates the presence of an analyte with a change in emission allow for internally referenced measurements potentially accounting for detrimental influences from instrument drifts, light source fluctuations or sensor materials-related inhomogeneities.
KW - Molecular imprinting
KW - Fluorescence
KW - Core-shell particles
KW - Chlorogenic acid
KW - Ratiometric measurement
PY - 2021
DO - https://doi.org/10.1007/978-1-0716-1629-1_17
VL - 2359
SP - 195
EP - 208
PB - Springer
CY - Humana, New York, NY
AN - OPUS4-53336
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tobias, Charlie
T1 - Dip-stick coated with Polystyrene-Silica Core-Shell particles for the detection of microbiological fuel contamination
N2 - The microbial contamination of fuels by fungi or bacteria presents risks such as corrosion and fuel system fouling, which can produce critical problems in refineries and distribution systems and has a significant economic impact at every phase of the process. Many factors have been cited as responsible for microbial growth, like the presence of water in the storage tanks. Indeed, only 1 % water in a storage system is enough for the growth of microorganisms like bacteria or yeasts, as well as for the development of fungal biomass at the oil/water interface.1
In this work, a rapid test for the accurate determination of genomic DNA from aqueous fuel extracts is presented. The detection is based on the employment of polystyrene-mesoporous silica core-shell particles, on which modified fluorescent molecular beacons are covalently grafted. Those beacons incorporate in the hairpin loop a target sequence highly conserved in all bacteria, corresponding to a fragment of the 16S ribosomal RNA subunit. The designed single-stranded molecular beacon contained fluorescein as an internal indicator and a quencher in its proximity when not hybridized. Upon hybridization in presence of the target sequence, the indicator and the quencher are spatially separated, resulting in fluorescence enhancement. To perform the assay the designed particles were disposed on different glass fiber strips to try to achieve a portable and sensitive rapid test. Assays showed that presence of genomic DNA extracts from bacteria down to 50–70 μg L-1 induces a fluorescence response. The optical read-out was adapted for on-site monitoring by adapting a 3D-printed case on a conventional smartphone, taking advantages of the CMOS detector sensitivity.2 Such embedded assembly allowed to detect genomic DNA in aqueous extracts down to the mg L-1 range and presents an interesting step toward on-site monitoring of fuel contamination.
T2 - Europtrode 2021
CY - Warsaw, Poland
DA - 28.11.2021
KW - Bacgteria
KW - Fungi
KW - Rapid test
KW - Fluorescence
KW - Smartphone
KW - Biofouling
PY - 2021
AN - OPUS4-53867
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescent, nanoparticle-loaded polymer microparticles - comparing synthesis routes
N2 - Our comparison showed that the route used for the synthesis of luminescent, NP-loaded PSMPs can play a significant role for the luminescence properties, as well as the number of accessible SFGs, and hence subsequent functionalization. This should be considered for future applications.
T2 - Bunsen-Tagung 2023
CY - Berlin, Germany
DA - 05.06.2023
KW - Fluorescence
KW - Polymerization
KW - Microbeads
KW - Quantum dots
KW - Comparison
PY - 2023
AN - OPUS4-57628
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Srivastava, Priyanka
A1 - Tavernaro, Isabella
A1 - Genger, C.
A1 - Welker, P.
A1 - Huebner, Oskar
A1 - Resch-Genger, Ute
T1 - Multicolor Polystyrene Nanosensors for the Monitoring of Acidic, Neutral, and Basic pH Values and Cellular Uptake Studies
N2 - A first tricolor fluorescent pH nanosensor is presented, which was rationally designed from biocompatible carboxylated polystyrene nanoparticles and two analyte-responsive molecular fluorophores. Its fabrication involved particle staining with a blue-red-emissive dyad, consisting of a rhodamine moiety responsive to acidic pH values and a pH-inert quinoline fluorophore, followed by the covalent attachment of a fluorescein dye to the particle surface that signals neutral and basic pH values with a green fluorescence. These sensor particles change their fluorescence from blue to red and green, depending on the pH and excitation wavelength, and enable ratiometric pH measurements in the pH range of 3.0−9.0. The localization of the different sensor dyes in the particle core and at the particle surface was confirmed with fluorescence microscopy utilizing analogously prepared polystyrene microparticles. To show the application potential of these polystyrene-based multicolor sensor particles, fluorescence microscopy studies with a human A549 cell line were performed, which revealed the cellular uptake of the pH nanosensor and the differently colored emissions in different cell organelles, that is, compartments of the endosomal-lysosomal pathway. Our results demonstrate the underexplored potential of biocompatible polystyrene particles for multicolor and multianalyte sensing and bioimaging utilizing hydrophobic and/or hydrophilic stimuli-responsive luminophores.
KW - Microparticle
KW - Fluorescence
KW - Sensor
KW - pH
KW - Quantum yield
KW - Multiplexing
KW - Imaging
KW - Cell
KW - Quality assurance
KW - Nano
KW - Polymer
KW - Bioimaging
KW - Particle
KW - Application
PY - 2022
DO - https://doi.org/10.1021/acs.analchem.2c00944
VL - 94
IS - 27
SP - 9656
EP - 9664
PB - ACS
AN - OPUS4-55365
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Engineered Nanomaterials- Novel Approaches for Risk Assessment and Safe-by-Design
N2 - The overall interest in nanotoxicity, triggered by the increasing use of nanomaterials in the material and life sciences, and the synthesis of an ever increasing number of new functional nanoparticles calls not only for standardized test procedures1,2 and for efficient approaches to screen the potential genotoxicity of these materials, but also for standardized and validated methods for surface analysis.
4,5 The analysis and quantification of surface chemistry is hence in the focus of an increasing number of standardization organizations and interlaboratory comparisons with different analytical methods are being done.5 For the monitoring of nanomaterial synthesis and the fast assessment of the number of functional groups such as carboxyl and amino functionalities, which are very commonly used functionalities in the life sciences, simple and validated methods are needed that can be performed with common laboratory instrumentation. 5,6 Here we provide a brief overview of the ongoing research in division Biophotonics employing quantitative NMR (qNMR), conductometry, and colorimetric and fluorometric optical assays for the determination of the total and the accessible number of carboxyl and amino groups on differently sized polymer and silica nano- and microparticles.5-7
T2 - Workshop NanoRiskSD project
CY - Berlin, Germany
DA - 09.06.2022
KW - Nanoparticle
KW - Surface analysis
KW - Standardization
KW - Quality assurance
KW - Validation
KW - qNMR
KW - Silica
KW - Polymer
KW - Fluorescence
KW - Assay
KW - Conductometry
KW - Method comparison
KW - Analytical sciences
PY - 2022
AN - OPUS4-54999
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Design and Quantitative Characterization of Functional Molecular Chromophores and Nanomaterials with UV/vis/NIR/IR Emission – An Overview of Research Activities in Division Biophotonics
N2 - In the focus of division Biophotonics are the design, preparation, analytical and spectroscopic characterization, and application of molecular and nanoscale
functional materials, particularly materials with a photoluminescence in the visible, near infrared (NIR) and short-wave infrared (SWIR). This includes optical reporters for bioimaging and sensing, security and authentication barcodes, and materials for solid state lighting, energy conversion, and photovoltaics. For the identification of optimum particle structures quantitative spectroscopic studies are performed under application-relevant conditions, focusing on the key performance parameter photoluminescence quantum yield. In addition, simple, cost-efficient, and standardizable strategies for quantifying functional groups on the surface of nano- and microparticles are developed, here with a focus on optical assays and electrochemical titration methods, cross-validated by more advanced methods such as quantitative NMR. In addition, reference materials and reference products are developed for optical methods, particularly luminescence techniques, and for analytical methods utilized for the characterization of nanomaterials.
T2 - Projekttreffen Nile-Chrome 2.0
CY - Mainz, Germany
DA - 11.12.2023
KW - Fluorescence
KW - Quantum yield
KW - Optical spectroscopy
KW - Reference material
KW - Reference data
KW - Quality assurance
KW - Dye
KW - Reference product
KW - NIR
KW - SWIR
KW - Nano
KW - Particle
KW - Silica
KW - Polymer
KW - Surface group analysis
KW - Sensor molecules
PY - 2023
AN - OPUS4-59123
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tavernaro, Isabella
T1 - Design of Fluorescent, Amorphous Silica-NPs and their Versatile Use in Sensing Applications
N2 - Surface functionalized silica nanoparticles (SiO2-NP) gained great interest in the life and material sciences, as they can be used e.g. as drug carriers, fluorescent sensors, and multimodal labels in bioanalytical assays and imaging applications. They are highly stable, are easily produced and modified on a large scale at low cost and can be labeled or stained with a multitude of sensor dyes. These dye modified particle conjugates have several advantages as compared to conventional molecular probes like enhanced brightness, ease of designing ratiometric systems by combining analyte-sensitive and inert reference dyes, and increased photostability. Moreover, stained nanoparticles can enable the use of hydrophobic dyes in aqueous environments.
Here we present our work on multicolored sensors for the measurement of pH, oxygen and saccharides utilizing amorphous SiO2 NPs.
T2 - Focus Area Day Analytical Sciences 2023
CY - Berlin, Germany
DA - 20.04.2023
KW - Amorphous silica particles
KW - Particle Synthesis
KW - Nano
KW - Ratiometric Sensors
KW - Fluorescence
KW - pH probe
KW - Dye
PY - 2023
AN - OPUS4-59151
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Wegner, Karl David
T1 - Advancing Short-Wave Infrared (SWIR) Emission
N2 - There is a growing interest in the exploitation of the short-wave infrared (SWIR), which refers to the wavelength band of light between 900 nm and 2500 nm. Luminophores that emit in the SWIR are used in various areas of telecommunications, photovoltaics, security systems (night vision), and in biomedicine. In particular for biomedical applications, the SWIR range is highly promising because light scattering, absorption, and autofluorescence of tissue and biological compounds are strongly reduced compared to the visible (400–700 nm) and NIR (~700–900 nm). The benefits of SWIR-emissive QDs have been demonstrated for a variety of applications, such as in thermal sensing, as photoelectrochemical biosensor, in in vivo vascular imaging, and for fluorescence-guided surgery.[1]
Full exploitation of SWIR photoluminescence (PL) imaging and sensing is currently hampered by i.) a lack of suitable advanced nanomaterials with a high PL quantum yield (PL QY) and a high brightness, that can be used safely in vivo and ii.) a lack of quantitative and reliable data on the optical properties of many SWIR emitters. Promising nanomaterials for the SWIR are heavy metal-free Ag2S quantum dots (QDs).
Aiming for the development of SWIR advanced nanomaterials with optimum performance, we have dived deeper into the photophysical processes occurring in these nanomaterials, thereby exploring in depth how the environment such as temperature, surface ligand composition, and the incorporation of transition metals influence the optical properties Ag2S QDs. We observed a strong enhancement of the SWIR emission of upon addition of metal ions such as Zn2+, yielding PL quantum yields of about 10% and thus making them highly suitable for non-invasive deep imaging of vascular networks and 3D fluid flow mapping.
T2 - Anakon 2025
CY - Leipzig, Germany
DA - 10.03.2025
KW - Quantum dots
KW - Nano
KW - Particle
KW - SWIR
KW - Fluorescence
KW - Temperature
KW - Ag2S
KW - Quality assuarance
KW - Ligand
KW - Sensor
PY - 2025
AN - OPUS4-62769
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Witte, F.
A1 - Rietsch, P.
A1 - Sinha, S.
A1 - Krappe, A.
A1 - Joswig, J.-O.
A1 - Götze, J. P.
A1 - Nirmalananthan-Budau, Nithiya
A1 - Resch-Genger, Ute
A1 - Eigler, S.
A1 - Paulus, B.
T1 - Fluorescence Quenching in J‑Aggregates through the Formation of Unusual Metastable Dimers
N2 - Molecular aggregation alters the optical properties of a system as fluorescence may be activated or quenched. This is usually described within the well-established framework of H- and J-aggregates. While H-aggregates show nonfluorescent blueshifted absorption bands with respect to the isolated monomer, Jaggregates are fluorescent displaying a redshifted peak. In this publication, we employ a combined approach of experiment and theory to study the complex aggregation features and photophysical properties of diaminodicyanoquinone derivatives, which show unusual and puzzling nonfluorescent redshifted Absorption bands upon aggregation. Our theoretical analysis demonstrates that stable aggregates do not account for the experimental observations.
Instead, we propose an unprecedented mechanism involving metastable dimeric species formed from stable dimers to generate nonfluorescent J-aggregates. These results represent a novel kind of aggregation-induced optical effect and may have Broad implications for the photophysics of dye aggregates.
KW - Fluorescence
KW - Llifetime
KW - Dye
KW - Quantum yield
KW - Label
KW - Reporter
KW - Aggregation
KW - Monomer
KW - Heory
KW - Mechanism
KW - photophysics
PY - 2021
DO - https://doi.org/10.1021/acs.jpcb.1c01600
SN - 1520-5207
VL - 125
IS - 17
SP - 4438
EP - 4446
PB - ACS Publikations
AN - OPUS4-52619
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Introduction to Fluorescence Spectroscopy
N2 - A brief introduction to fluorescence spectroscopy will be provided, ranging from typically measured fluorescence quantities over instrument-specific contributions to measured fluorescence signals to selected applications. In this context, an overview of the photoluminescence properties of molecular and nanoscale luminescence reporters will be given including a brief insight into their photophysics and fluorescence standards designed by division Biophotonics for the calibration and instrument performance validation of fluorescence measuring devices will be presented.
T2 - Analytical Academy BAM
CY - Online meeting
DA - 17.11.2020
KW - Fluorescence
KW - Quality assurance
KW - Quantification
KW - Linearity
KW - Measurement uncertainty
KW - Method
KW - Nano particle
KW - Dye
PY - 2020
AN - OPUS4-51619
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescence encoding of polymer microbeads with nanocrystals during polymerization
N2 - The Goal & Motivation
- Spherical polymer beads
- Controlled size in the low µm range
- Narrow size distribution
- Homogeneous encoding with molecular and nanoscale luminophores (dyes , QDs, platelets etc.)
- Sufficient fluorescence
- Easy, accessible procedure
T2 - GrK Nanohybrid Conference
CY - Hamburg, Germany
DA - 04.10.2022
KW - Polymerization
KW - Nanocrystals
KW - Fluorescence
KW - Microbeads
PY - 2022
AN - OPUS4-56028
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Billimoria, K.
A1 - Diaz Fernandez, Y. A.
A1 - Andresen, Elina
A1 - Sorzabal-Bellido, I.
A1 - Huelga-Suarez, G.
A1 - Bartczak, D.
A1 - Ortiz de Solórzano, C.
A1 - Resch-Genger, Ute
A1 - Goenaga Infante, H.
T1 - The potential of bioprinting for preparation of nanoparticle-based calibration standards for LA-ICP-ToF-MS quantitative imaging
N2 - This paper discusses the feasibility of a novel strategy based on the combination of bioprinting nano-doping technology and laser ablation-inductively coupled plasma time-of-flight mass spectrometry analysis for the preparation and characterization of gelatin- based multi-element calibration standards suitable for quantitative imaging. To achieve this, lanthanide up-conversion nanoparticles were added to a gelatin matrix to produce the bioprinted calibration standards. The features of this bioprinting approach were com- pared with manual cryosectioning standard preparation, in terms of throughput, between batch repeatability and elemental signal homogeneity at 5 μm spatial resolution. By using bioprinting, the between batch variability for three independent standards of the same concentration of 89 Y (range 0–600 mg/kg) was reduced to 5% compared to up to 27% for cryosectioning. On this basis, the relative standard deviation ( RSD ) obtained between three independent calibration slopes measured within 1 day also reduced from 16% (using cryosectioning ) to 5% (using bioprinting), supporting the use of a single standard preparation replicate for each of the concentrations to achieve good calibration performance using bioprinting. This helped reduce the analysis time by approximately 3-fold. With cryosectioning each standard was prepared and sectioned individually, whereas using bio-printing it was possible to have up to six different standards printed simultaneously, reducing the preparation time from approximately 2 h to under 20 min (by approxi- mately 6-fold). The bio-printed calibration standards were found stable for a period of 2 months when stored at ambient temperature and in the dark.
KW - Environmental analysis
KW - LA-ICP-MS
KW - Lanthanide
KW - Tag
KW - Fluorescence
KW - Nanoparticles
KW - Reference material
KW - Quality assurance
KW - 3D-printing
KW - Synthesis
KW - Production
KW - Multimodal
PY - 2022
DO - https://doi.org/10.1093/mtomcs/mfac088
SN - 1756-591X
VL - 14
IS - 12
SP - 1
EP - 9
PB - Oxford University Press
CY - Oxford
AN - OPUS4-57018
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescent, Semiconductor Nanoparticle-loaded Polymer Microbeads - Comparing Particle Architectures
N2 - The synthesis of luminescent polymer microparticles stained with different, including non-spherical, semiconductor nanoparticles (NPs) was developed and optimized while ensuring a good preservation of the particle photoluminescence. The aplicability of the different semiconductor NPs was determined to depend on their surface chemistry and shape. Thus, a first correlation of semiconductor NP architecture and applicability could be deduced, which has not been reported before.
T2 - 821. WE-Heraeus-Seminar
CY - Bad Honnef, Germany
DA - 12.11.2024
KW - Nanoparticle
KW - Surface chemistry
KW - Synthesis
KW - Fluorescence
KW - Luminescence
PY - 2024
AN - OPUS4-61732
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Wegner, Karl David
T1 - Luminescent Quantum dots – the next-generation nano light bulbs
N2 - Fluorescent semiconductor nanocrystals, also known as quantum dots (QDs), enabled many advancements in biotechnology, photovoltaics, photocatalysis, quantum computing and display devices. The high versatility of this nanomaterial is based on their unique size-tunable photoluminescence properties, which can be adjusted from the visible to the near-infrared range. In contrast to other nanomaterials, QDs made the transition from a laboratory curiosity to the utilization in commercial products, like the QLED television screen or in smartphone displays. The best investigated QDs are composed of heavy metals like cadmium or lead, which is not the best choice in terms of toxicity and environmental pollution. A more promising material is Indium Phosphide (InP), which is also currently used by Samsung, Sony and co. in the QLED displays.
In this contribution, I would like to give you a sneak peek behind the curtains of nanomaterial synthesis and show how this material is produced, how to stabilize their structural properties, and assess their toxicity in environmentally relevant conditions. Furthermore, I would like to present a synthesis method to accomplish the last open challenge in display technology of a blue luminescent LED based on QDs by introducing a new element to the InP QDs.
T2 - The Berlin Postdoc Day
CY - Berlin, Germany
DA - 03.11.2022
KW - InP
KW - Quantum dots
KW - Fluorescence
KW - Aging
KW - Doping
KW - Nanomaterial
KW - Cytotoxicity
PY - 2022
AN - OPUS4-56194
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Photoluminescence quantum yields of molecular & nanoscale luminophores in the UV/VIS/NIR/SWIR in dispersion and in the solid state
N2 - Photophysical and mechanistic studies, the comparison of different emitter classes, and the rational design of the next generation of molecular and nanoscale reporters require quantitative photoluminescence measurements and the reliable determination of the key performance parameter photoluminescence quantum yield (QY), i.e., the number of emitted per absorbed photons. This is of special importance for all photoluminescence applications in the life and material sciences in the UV/vis/NIR/SWIR.
T2 - MAF 2024 Conference
CY - Valencia, Spain
DA - 08.09.2024
KW - Nanoparticle
KW - Nano
KW - Luminescence
KW - Quality assurance
KW - Synthesis
KW - Standardization
KW - Reference material
KW - Quantum yield
KW - Fluorescence
KW - Reference data
KW - Integrating sphere spectroscopy
KW - ILC
KW - Converter material
PY - 2024
AN - OPUS4-61072
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Pauli, J.
A1 - Güttler, Arne
A1 - Schneider, T.
A1 - Würth, Christian
A1 - Resch-Genger, Ute
T1 - Fluorescence Quantum Yield Standards for the UV/Visible/NIR: Development, Traceable Characterization, and Certification
N2 - The rational design of next generation molecular and nanoscale reporters and the comparison of different emitter classes require the determination of the fluorometric key performance parameter fluorescence quantum yield (Φf), i.e., the number of emitted photons per number of absorbed photons. Main prerequisites for reliable Φf measurements, which are for transparent luminophore solutions commonly done relative to a reference, i.e., a fluorescence quantum yield standard of known Φf, are reliable and validated instrument calibration procedures to consider wavelength-, polarization-, and time-dependent instrument specific signal contributions, and sufficiently well characterized fluorescence quantum yield standards. As the standard’s Φf value directly contributes to the calculation of the sample’s Φf, its accuracy presents one of the main sources of uncertainty of relative Φf measurements. To close this gap, we developed a first set of 12 fluorescence quantum yield standards, which absorb and emit in the wavelength region of 330−1000 nm and absolutely determined their Φf values with two independently calibrated integrating sphere setups.
Criteria for standard selection and the configuration of these novel fluorescence reference materials are given, and the certification procedure is presented including homogeneity and stability studies and the calculation of complete uncertainty budgets for the certified Φf values. The ultimate goal is to provide the community of fluorescence users with available reference materials as a basis for an improved comparability and reliability of quantum yield data since the measurement of this spectroscopic key property is an essential part of the characterization of any new emitter.
KW - Optical spectroscopy
KW - Traceability
KW - Reference product
KW - Dye
KW - Fluorescence
KW - Quantum yield
KW - Reference material
KW - Reference data
KW - Certification
KW - Quality assurance
PY - 2023
DO - https://doi.org/10.1021/acs.analchem.2c05530
VL - 95
SP - 5671
EP - 5677
PB - American Chemical Society
AN - OPUS4-58151
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tavernaro, Isabella
T1 - Development of amorphous silica particle based reference materials for surface functional group quantification
N2 - Functionalized nanomaterials (NM) with their unique size-dependent properties are of increasing relevance for current and future developments in various fields such as medical and pharmaceutical industry, computing, electronics or food and consumer products. The performance and safety of NM are determined by the sum of their intrinsic physicochemical properties.1 Besides other key parameters, the particle surface chemistry, which is largely controlled by the chemical nature and density of functional groups and ligands, must be considered for a better performance, stability, and processibility of NM, as well as their interaction with the environment. Thus, particle standards with well-designed surfaces and methods for functional group quantification can foster the sustainable development of functional and safe(r) NM.2 Here we provide a brief overview of the ongoing research in division Biophotonics to design tailored amorphous silica reference particles with bioanalytically relevant functional groups and ligands, for the development of standardized and validated surface functional group quantification methods.
T2 - Workshop NanoRiskSD project
CY - Berlin, Germany
DA - 09.06.2022
KW - Nanoparticle
KW - Surface analysis
KW - Silica
KW - Fluorescence
KW - Assay
PY - 2022
AN - OPUS4-55004
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tavernaro, Isabella
T1 - Rational Design of Analyte-responsive Fluorescent Particle Sensors for Life Sciences Applications
N2 - Engineered and tailor-made nanomaterials (NM) are of increasing relevance for current and future developments in the life and material sciences for applications, e.g., as drug carriers, fluorescent sensors, and multimodal labels in bioanalytical assays, and reporters for imaging applications. For instance, NM-based reporters and sensors, that are labelled or stained with a multitude of conventional or sensor dyes, have several advantages as compared to molecular probes like enhanced brightness, i.e., amplified signals, ease of designing ratiometric systems by combining analyte-sensitive and inert reference dyes, and increased photostability. Moreover, this can enable the use of hydrophobic dyes in aqueous environments. For rational NM design, choosing and tailoring the intrinsic physicochemical properties, such as particle size, size distribution, morphology, and surface chemistry of the NM application-specific considerations like biocompatibility, ease and low cost of preparation, and colloidal stability and performance in the targeted environment must be considered. In this lecture, different design concepts of inorganic, organic, and hybrid NM and microparticles with hydrophilic surface chemistries and different functionalities are presented that can be used for the targeting of lysosomes; and to monitor functional parameters of endo-lysosomal compartments, like pH or enable oxygen sensing.
T2 - Chemical Probes for Lysosomal Biology
CY - York, United Kingdom
DA - 09.09.2024
KW - Luminescence
KW - Quantification
KW - Nano
KW - Particle
KW - Quality assurance
KW - Fluorescence
KW - Method
KW - Uncertainty
KW - Reference material
KW - Sensor
KW - Synthesis
KW - Dye
KW - pH
KW - Silica
KW - Polystyrene
KW - Surface analysis
PY - 2024
AN - OPUS4-62173
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - GEN
A1 - Scholtz, Lena
A1 - Resch-Genger, Ute
T1 - Behind the Paper - Dual color pH probes made from silica and polystyrene nanoparticles and their performance in cell studies
N2 - In this contribution we highlight the importance of comparison for scientific research while developing a new, functional pH sensor system, and the valuable insights this can provide.
KW - Dye
KW - Optical Spectroscopy
KW - pH probe
KW - Silica and Polystyrene Particles
KW - Nano
KW - Surface groups
KW - Safe-by-Design
KW - Cell studies
KW - Sensors
KW - Particle Synthesis
KW - Fluorescence
PY - 2023
UR - https://communities.springernature.com/posts/dual-color-ph-probes-made-from-silica-and-polystyrene-nanoparticles-and-their-performance-in-cell-studies
SP - 1
EP - 2
PB - Springer Nature
CY - London
AN - OPUS4-59150
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
A1 - Pauli, J.
A1 - Güttler, Arne
A1 - Richter, Maria
A1 - Fiedler, Saskia
A1 - Frenzel, Florian
A1 - Wegner, Karl David
A1 - Würth, Christian
T1 - Photoluminescence Quantum Yields of Luminescent Nanocrystals and Particles in the UV/vis/NIR/SWIR
N2 - The rational design of functional luminescent materials such as semiconductor quantum dots and lanthanide-based upconversion nanoparticles, all photophysical and mechanistic studies, and the comparison of different emitters require accurate and quantitative photoluminescence measurements. Particularly the reliable determination of the key performance parameter photoluminescence quantum yield (f), the number of emitted per absorbed photons, and the brightness are of special importance for luminescence applications in the life and material sciences and nano(bio)photonics.[1] In this context, examples for absolute measurements of the photoluminescence quantum yields of UV/vis/NIR/SWIR emissive semiconductor quantum dots and rods, made from different materials, and spectrally shifting lanthanide upconversion nanocrystals with different surface chemistries in transparent matrices are presented including excitation wavelength and power density dependent studies utilizing integration sphere spectroscopy.[2,3] In addition, procedures for the absolute determination of the photoluminescence quantum yields of scattering dispersions of larger size quantum rods and differently sized inorganic particles have been developed as well as procedures for the characterization of solid luminescent nanomaterials such as different perovskites and YAG:Cer converter materials.[4] Thereby, challenges and pitfalls of f measurements in different wavelength regions including the SWIR and material-specific effects related to certain emitter classes are addressed, achievable uncertainties are quantified, and relative and absolute measurements of photoluminescence quantum yield measurements are compared to underline limitations of the former approach. Finally, a set of novel UV/vis/NIR quantum yield standards is presented including their certification with a complete uncertainty budget.[5]
T2 - NANAX 10
CY - Klosterneuburg, Austria
DA - 03.07.2023
KW - Fluorescence
KW - Optical spectroscopy
KW - Reference data
KW - Traceability
KW - NIR
KW - Scattering
KW - Reference material
KW - Certification
KW - Quality assurance
KW - Dye
KW - Reference product
KW - SWIR
KW - Nano
KW - Particle
KW - Perovskite
KW - Integrating sphere spectroscopy
KW - Quantum yield
PY - 2023
AN - OPUS4-58238
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescent Polymer Microbeads – Synthesis & Applications
N2 - Differently sized, luminescent polymer beads encoded with QDs were prepared with a simple, optimized polymerization procedure. The optical
properties of the resulting particles were studied to ensure sufficient fluorescence. In addition, possible future applications were identified.
T2 - Future WiNS: New Energies for a Sustainable World
CY - Berlin, Germany
DA - 07.12.2022
KW - Polymerization
KW - Quantum dots
KW - Fluorescence
KW - Luminescence
PY - 2022
AN - OPUS4-56560
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescent polymer microbeads - Why and how?
N2 - Pitch Talk about the synthesis and applications of polymer microbeads encoded with (luminescent) nanoparticles.
T2 - JCF Frühjahrssymposium 2023
CY - Gießen, Germany
DA - 21.03.2023
KW - Fluorescence
KW - Microbeads
KW - Nanocrystals
KW - Polymerization
PY - 2023
AN - OPUS4-57260
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Srivastava, Priyanka
T1 - Multi-color nanosensors for ratiometric measurements of acidic, neutral, and basic pH based on silica and polystyrene particles
N2 - pH presents one of the most important analytes in the life and material sciences, indicating, e.g., diseases and corrosion processes. This includes the optical monitoring of pH in living cells for studying cellular internalization pathways, such as phagocytosis, endocytosis, and receptor mediated internalization with the aid of molecular and nanoscale fluorescent sensors. Nanoparticle (NP)-based sensors, that are labelled or stained with a multitude of sensor dyes, have several advantages as compared to conventional molecular probes like enhanced brightness, i.e., amplified signals, ease of designing ratiometric systems by combining analyte-sensitive and inert reference dyes, and increased photostability. Moreover, this can enable the use of hydrophobic dyes in aqueous environments. Versatile templates and carriers for the fabrication of nanosensors by staining and/or labelling with different fluorophores and sensor molecules are surface-functionalized particles like silica (SiO2) and polystyrene (PS) particles. Here we present a platform of blue-red-green fluorescent pH nanosensors for the measurement of acidic, neutral, and basic pH utilizing both types of matrices and two spectrally distinguishable sensor dyes with an integrated reference dye and demonstrate its applicability for cellular studies.
T2 - E-MRS Spring Meeting 2022
CY - Online meeting
DA - 30.05.2022
KW - Nanosensors
KW - pH sensing
KW - Silica- and polystyrene particles
KW - Ratiometric sensors
KW - Fluorescence
PY - 2022
AN - OPUS4-55597
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Wen, Keqing
A1 - Gorbushina, Anna
A1 - Schwibbert, Karin
A1 - Bell, Jérémy
T1 - Microfluidic platform with precisely controlled hydrodynamic parameters and integrated features for generation of microvortices to accurately form and monitor biofilms in flow
N2 - Microorganisms often live in habitats characterized by fluid flow, and their adhesion to surfaces in industrial systems or clinical settings may lead to pipe clogging, microbially influenced corrosion, material deterioration, food spoilage, infections, and human illness. Here, a novel microfluidic platform was developed to investigate biofilm formation under precisely controlled (i) cell concentration, (ii) temperature, and (iii) flow conditions. The developed platform central unit is a single-channel microfluidic flow cell designed to ensure ultrahomogeneous flow and condition in its central area, where features, e.g., with trapping properties, can be incorporated. In comparison to static and macroflow chamber assays for biofilm studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes and have better environment control and smaller sample requirements. Flow simulations and experiments with fluorescent particles were used to simulate bacteria flow in the platform cell for calculating flow velocity and direction at the microscale level. The combination of flow analysis and fluorescent strain injection in the cell showed that microtraps placed at the center of the channel were efficient in capturing bacteria at determined positions and to study how flow conditions, especially microvortices, can affect biofilm formation. The microfluidic platform exhibited improved performances in terms of homogeneity and robustness for in vitro biofilm formation. We anticipate the presented platform to be suitable for broad, versatile, and high-throughput biofilm studies at the microscale level.
KW - Topographical pattern
KW - E. coli
KW - Fluorescence
KW - Bacteria trapping
KW - Particle velocimetry
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-610450
DO - https://doi.org/10.1021/acsbiomaterials.4c00101
SN - 2373-9878
VL - 10
IS - 7
SP - 4626
EP - 4634
PB - ACS Publ.
CY - Washington, DC
AN - OPUS4-61045
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sun, Yijuan
A1 - Pérez-Padilla, Víctor
A1 - Valderrey, Virginia
A1 - Bell, Jérémy
A1 - Gawlitza, Kornelia
A1 - Rurack, Knut
T1 - Ratiometric detection of perfluoroalkyl carboxylic acids using dual fluorescent nanoparticles and a miniaturised microfluidic platform
N2 - The widespread contamination of soil and water with perfluoroalkyl substances (PFAS) has caused considerable societal and scientific concern. Legislative measures and an increased need for remediation require effective on-site analytical methods for PFAS management. Here we report on the development of a green-fluorescent guanidine-BODIPY indicator monomer incorporated into a molecularly imprinted polymer (MIP) for the selective detection of perfluorooctanoic acid (PFOA). Complexation of PFOA by the indicator, which is mediated by concerted protonation-induced ion pairing-assisted hydrogen bonding, significantly enhances fluorescence in polar organic solvents. The MIP forms as a thin layer on silica nanoparticles doped with tris(bipyridine)ruthenium(II) chloride, which provides an orange emission signal as internal reference, resulting in low measurement uncertainties. Using a liquid-liquid extraction protocol, this assay enables the direct detection of PFOA in environmental water samples and achieves a detection limit of 0.11 µM. Integration into an opto-microfluidic system enables a compact and user-friendly system for detecting PFOA in less than 15 minutes.
KW - PFAS
KW - Molecular imprinting
KW - Microfluidics
KW - Fluorescence
KW - Onsite assay
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-650270
DO - https://doi.org/10.1038/s41467-025-66872-9
SN - 2041-1723
VL - 16
IS - 1
SP - 1
EP - 16
PB - Springer Science and Business Media LLC
AN - OPUS4-65027
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Oskoei, Párástu
A1 - Afonso, Rúben
A1 - Bastos, Verónica
A1 - Nogueira, João
A1 - Keller, Lisa-Marie
A1 - Andresen, Elina
A1 - Saleh, Maysoon I.
A1 - Rühle, Bastian
A1 - Resch-Genger, Ute
A1 - Daniel-da-Silva, Ana L.
A1 - Oliveira, Helena
T1 - Upconversion Nanoparticles with Mesoporous Silica Coatings for Doxorubicin Targeted Delivery to Melanoma Cells
N2 - Melanoma is one of the most aggressive skin cancers and requires innovative therapeutic strategies to overcome the limitations of conventional therapies. In this work, upconversion nanoparticles coated with mesoporous silica and functionalized with folic acid (UCNP@mSiO2-FA) were developed as a targeted nanocarrier system for the delivery of doxorubicin (DOX). The UCNPs were synthesized via thermal decomposition, coated with mesoporous silica shells, and functionalized with folic acid (FA) to enable receptor-mediated targeting. DOX was then loaded into the mesoporous silica coating by adsorption, yielding UCNP@mSiO2-FA-DOX. The different UCNPs were characterized for size, composition, colloidal stability, and loading and release of DOX. This comprehensive physicochemical characterization confirmed a high DOX loading efficiency and a slightly increased drug release under acidic conditions, mimicking the tumour microenvironment. In vitro assays using four melanoma cell lines (A375, B16-F10, MNT-1, and SK-MEL-28) revealed an excellent biocompatibility of UCNP@mSiO2-FA and a significantly higher cytotoxicity of UCNP@mSiO2-FA-DOX compared to unloaded UCNPs, in a dose-dependent manner. Cell cycle analysis demonstrated G2/M phase arrest after treatment with UCNP@mSiO2-FA-DOX, confirming its antiproliferative effect. Overall, UCNP@mSiO2-FA-DOX represents a promising nanoplatform for targeted melanoma therapy, combining active tumour targeting and enhanced anticancer efficacy.
KW - Fluorescence
KW - Synthesis
KW - Nano
KW - Particle
KW - Silica
KW - Cell
KW - Uptake
KW - Drug
KW - Characterization
KW - DOX
KW - Imaging
KW - Toxicity
KW - Release
KW - pH
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653596
DO - https://doi.org/10.3390/molecules31010074
SN - 1420-3049
VL - 31
IS - 1
SP - 1
EP - 18
PB - MDPI AG
AN - OPUS4-65359
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Wen, Keqing
A1 - Gorbushina, Anna
A1 - Schwibbert, Karin
A1 - Bell, Jérémy
T1 - A microfluidic platform for monitoring biofilm formation in flow under defined hydrodynamic conditions
N2 - Bacterial adhesion on surfaces of medical, water and food applications may lead to infections, water or food spoilage and human illness. In comparison to traditional static and macro flow chamber assays for biofilm formation studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes, have better environment control and smaller sample requirements.
In this work, a novel microfluidic platform is developed to investigate biofilm adhesion under precisely controlled bacteria concentration, temperature, and flow conditions. This platform central unit is a single-inlet microfluidic flow cell with a 5 mm wide chamber designed and tested to achieve ultra-homogenous flow in the central area of chamber. Within this area, defined microstructures are integrated that will disturb the homogeneity of the flow, thus changing bacterial adhesion pattern.
Here we present the monitoring of bacterial biofilm formation in a microfluidic chip equipped with a microstructure known as micro-trap. This feature is based on a 3D bacteria trap designed by Di Giacomo et al. and successfully used to sequester motile bacteria.
At first, fluorescent particles similar in size to Escherichia coli (E. coli) are used to simulate bacteria flow inside the flow cell and at the micro-trap. The turbulences induced by the trap are analyzed by imaging and particle tracking velocimetry (PTV). Secondly, the model strain E. coli TG1, ideal and well described for biofilm studies, is used to analyze biofilm formation in the micro-trap. Therefore, a stable fluorescent strain E. coli TG1-MRE-Tn7-141 is constructed by using Tn7 transposon mutagenesis according to the method described by Schlechter et al. Sequestering of E. coli cells within the micro-trap was followed using epifluorescence microscopy.
The novel microfluidic platform shows great potential for assessment of bacterial adhesion under various flow regimes. The performance of structural feature with respect to the generation of turbulences that promote or reduce bacterial adhesion can be systematically examined.
The combination of flow analysis and fluorescent strain injection into the microfluidic chip shows that the micro-trap is useful for capturing bacteria at defined positions and to study how flow conditions, especially micro-turbulences, can affect biofilm formation. It represents a powerful and versatile tool for studying the relation between topography and bacteria adhesion.
T2 - International Conference on Miniaturized Systems for Chemistry and Life Sciences
CY - Katowice, Poland
DA - 15.10.2023
KW - Biofilm
KW - E. coli
KW - Microfluidics
KW - Velocimetry
KW - Fluorescence
PY - 2023
AN - OPUS4-59593
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Prakash, Swayam
A1 - Mishra, Ashok Kumar
T1 - Facile Fluorometric Detection of Faecal Pigments: Challenges and Solutions Concerning Water Quality Testing
N2 - AbstractDetection and monitoring of faecal contaminants in water is an important component of water quality testing protocol worldwide. However, a systematic overview of the faecal indicator paradigm, including its fundamentals and challenges in analytical applications, is missing. In particular, with respect to the advantages of using faecal indication pigments (FIP) over faecal indication bacteria (FIB). This discussion is based on two FIPs, Urobilin (UB) and Stercobilin (SB), which can enable rapid and real‐time indication of faecal contaminants in ground/surface water. Novel strategies for enhancing sensitive fluorescence‐based techniques for trace concentration detection have been discussed in detail, with specific reference to understanding their physicochemical properties, photophysics, metal‐ligand complexation, molecular aggregations, thermodynamics, fluorescence response and matrix interferences in aqueous media or environmental samples. The insights provided in this perspective article could inspire procedures by avoiding ambiguities and misinterpretations.
KW - Faecal contamination
KW - Fluorescence
KW - Metal complexes
KW - Water analysis
KW - Optical and chemical sensing
KW - Spectroscopy
PY - 2025
DO - https://doi.org/10.1002/asia.202401750
SN - 1861-471X
SP - 1
EP - 8
PB - Wiley VHC-Verlag
AN - OPUS4-63082
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Rurack, Knut
T1 - Advanced Onsite Analysis for Point-of-Need Applications: Innovations for Robust, Reliable, and User-Friendly Detection
N2 - The advancement of portable analytical assays has transformed onsite analysis in several areas, including food safety, environmental monitoring and forensics. The SARS-CoV-2 pandemic has fueled a need for rapid, onsite solutions that enable immediate decision making without the need for and use of laboratory infrastructure. The integration of mobile devices with advanced cameras and significant computing power improves the accessibility and usability of these tests. However, many current methods are limited to the detection of single parameters. The next challenge is to develop robust multiplexed assays that can analyze multiple parameters simultaneously with high sensitivity. In this lecture, innovative approaches developed at BAM will be presented with a focus on supramolecular chemistry, luminescence detection, nanomaterials and miniaturization of devices. Examples will include mesoporous nanomaterials, gated indicator systems, imprinted polymers, microfluidic devices, test strips and smartphone-based analytical tools, focusing on two use cases, i.e., the detection of contaminants in surface waters and immunoanalytical explosives detection.
T2 - International Conference on Emergin Trends in Materials Chemistry
CY - Coimbatore, India
DA - 03.04.2025
KW - Onsite analysis
KW - Rapid tests
KW - Mobile devices
KW - Supramolecular chemistry
KW - Fluorescence
PY - 2025
AN - OPUS4-65434
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Scholtz, Lena
T1 - Luminescent, Semiconductor Nanoparticle-Loadedpolymer Microbeads–Comparingparticlearchitectures
N2 - Luminescent polymer microparticles (PMPs) are applied in various (bio)analytical and diagnostic processes.[1] The staining of these beads is important for the realization of optically distinguishable barcodes that can be read out, e.g., by a flow cytometer or fluorescence microscope. Typically, luminescent semiconductor nanoparticles (NPs) absorb in a broad wavelength range and show narrow emission bands, which enables simultaneous excitation of differently colored luminophores and facilitates a spectral discrimination.[1] This makes them ideal candidates for this purpose and encouraged us to explore and develop a simple, effective approach to luminescent semiconductor NP encoding of polystyrene PMPs and identify suitable synthesis conditions.[2]
Until now, mainly semiconductor quantum dots (QDs) have been used for the synthesis of luminescent PMPs, although NPs with different shapes could introduce beneficial new features. Aiming for the application of our developed procedure to non-spherical NPs, we systematically investigated the luminescence properties of the resulting NP-stained beads using fluorescence and integrating sphere spectroscopy as well as fluorescence and electron microscopy. These studies showed that the suitability of semiconductor NPs for the synthesis of luminescent PMPs depends not only on their shape, but also heavily on their surface chemistry.[3] The successful incorporation of nonspherical NPs opens the path to include even more NPs, and the results can help to deduce future applications for the beads which best suit their specific properties.
T2 - E-MRS Fall Meeting 2025
CY - Warsaw, Poland
DA - 15.09.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Quantum dot
KW - Quantum rod
KW - Platelet
KW - Quantum yield
KW - Polymer particle
KW - Encoding
KW - Surface chemistry
KW - Mechanism
KW - Characterization
KW - Lifetime
KW - Barcode
KW - Polymerization
KW - Method
PY - 2025
AN - OPUS4-64242
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Andresen, Elina
A1 - Resch-Genger, Ute
A1 - Michaelis, Matthias
A1 - Prinz, Carsten
A1 - Würth, Christian
T1 - Time-resolved luminescence spectroscopy for monitoring the stability and dissolution behaviour of upconverting nanocrystals with different surface coatings†
N2 - We demonstrate the potential of time-resolved luminescence spectroscopy for the straightforward assessment and in situ monitoring of the stability of upconversion nanocrystals (UCNPs). Therefore, we prepared hexagonal NaYF4:Yb3+,Er3+ UCNPs with various coatings with a focus on phosphonate ligands of different valency, using different ligand exchange procedures, and studied their dissolution behaviour in phosphate-buffered saline (PBS) dispersions at 20 °C and 37 °C with various analytical methods. The amount of the released UCNPs constituting fluoride ions was quantified by potentiometry using a Fluoride ion-sensitive electrode and particle disintegration was confirmed by transmission electron microscopy studies of the differently aged UCNPs. In parallel, the luminescence features of the UCNPs were measured with special emphasis on the lifetime of the sensitizer emission to demonstrate its suitability as Screening parameter for UCNP stability and changes in particle composition. The excellent correlation between the changes in luminescence lifetime and fluoride concentration highlights the potential of our luminescence lifetime method for UCNP stability screening and thereby indirect monitoring of the release of potentially hazardous fluoride ions during uptake and dissolution in biological systems. Additionally, the developed in situ optical method was used to distinguish the dissolution dynamics of differently sized and differently coated UCNPs.
KW - Fluorescence
KW - Lifetime
KW - Method
KW - Quantification
KW - Stability
KW - Coating
KW - Surface chemistry
KW - Lanthanide
KW - Fluoride
KW - Electrochemistry
KW - ICP-OES
KW - Upconversion
KW - Nano
KW - Particle
KW - Aging
KW - Quality assurance
KW - TEM
PY - 2020
DO - https://doi.org/10.1039/d0nr02931a
VL - 12
IS - 23
SP - 12589
EP - 12601
PB - Royal Society od Chemistry
AN - OPUS4-52088
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Shovo, Redoy Gazi
A1 - Thünemann, Andreas
A1 - Katcharava, Zviadi
A1 - Marinvo, Anja
A1 - Hoppe, Richard
A1 - Woltersdorf, Georg
A1 - Du, Mengxue
A1 - Androsch, Rene
A1 - de Souza e Silva, Juliana Martins
A1 - Busse, Karste
A1 - Binder, Wolfgang H.
T1 - Generating Tagged Micro- and Nanoparticles of Poly(ethylene furanoate) and Poly(ethylene terephthalate) as Reference Materials
N2 - Detecting nanoplastic particles in environmental samples and biological tissues remains a significant challenge, especially in view of newly emerging polymers, not yet commercially exploited. Fluorescent labeling provides a tagging strategy to overcome this limitation by reducing the detection limit of individual particles, especially for small-sized particles. We present a method for producing labeled nanoparticles (NP/MP) of poly(ethylene terephthalate) (PET) and poly(ethylene furanoate) (PEF), tagged with Alexa Fluor 633 or Alexa Fluor 647. Our preparations used mechanical grinding or solvent-based approaches (confined impinging jet mixing, ((CIJ, precipitation), generating particles with hydrodynamic diameters of 200–700 nm, displaying long-term stability in water of up to 57 days. Stable suspensions with concentrations of the particles ranging from 10 µg/mL (surfactant-free, by solvent mixing) to 5.88 mg/mL (precipitation, containing surfactant) were generated with zeta-potentials from −5 to −50 mV. Characterization of the nanoparticles by SEC, DSC, and XRD showed no significant changes in molecular weight, thermal behavior, or crystallinity via the solvent-based methods, compared to the pristine polymer, highlighting their suitability for producing standardized nanoparticle dispersions. Fluorescence spectroscopy of the Alexa-dye-labeled particles confirmed the successful incorporation of the Alexa dyes, so improving monitoring of their biological profiles of the PEF-MP/NPs. s-SNOM (near field imaging) could identify individual PEF-particles sized ∼200 nm by direct imaging.
KW - Reference Materials
KW - Nanoplastics
KW - Microplastics
KW - Polymer
KW - Fluorescence
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655531
DO - https://doi.org/10.1002/marc.202500839
SN - 1521-3927
VL - 47
IS - 4
SP - 1
EP - 11
PB - Wiley VHC-Verlag
CY - Weinheim
AN - OPUS4-65553
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Prakash, Swayam
A1 - Bell, Jérémy
A1 - Rurack, Knut
T1 - Rapid Onsite Detection of Fecal Contamination in Water Using a Portable Fluorometric Assay
N2 - Fecal pollution in water poses significant health risks, especially when contaminated sources are used for drinking and food production. Traditional water quality testing methods are expensive, slow, and require skilled personnel, limiting their accessibility. This work addresses these issues by developing a portable fluorometric assay for the detection of the fecal indicator pigment urobilin (UB). The assay uses silane-functionalized glass fiber strips impregnated with zinc chloride, providing a ‘drop-&-detect’ approach with enhanced fluorescence response mediated by the unique complexation properties of ZnCl2 and UB. This approach allows for the detection of UB at sub-nanomolar concentrations in less than 1 min using a 3D-printed setup with miniaturized optical components powered by a smartphone with its camera as a detector. The results validated with a benchtop fluorometer show the effectiveness of this method. The successful application of this userfriendly, rapid, and sensitive assay to real water samples from three rivers and the influx and efflux of a wastewater treatment plant advances field-based water quality monitoring, meets the WHO’s ASSURED criteria, and supports progress toward the global clean water and sanitation goals.
KW - Fecal pigment
KW - Fluorescence
KW - Signal amplification
KW - Surface chemistry
KW - Water quality testing
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655543
DO - https://doi.org/10.1021/acssensors.5c03922
SN - 2379-3694
VL - 11
SP - 1
EP - 9
PB - American Chemical Society
CY - Washington, D.C.
AN - OPUS4-65554
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Hernández-García, María Amparo
A1 - Rurack, Knut
A1 - Bell, Jérémy
T1 - Rapid fabrication of optical elements for sensing applications using a standard SLA printer
N2 - The demand for compact, high-performance optical components has driven the development of increasingly sophisticated and miniaturized optical elements, often requiring complex and costly fabrication methods. In this study, we propose a cost-effective and accessible methodology for the fabrication of lenses and free-form optics using a commercially available stereolithography (SLA) 3D printer. A systematic characterisation of six transparent photopolymer resins was conducted in terms of their spectroscopic, optical, and morphological properties, i.e., surface and dimensional properties. The evaluation encompassed parameters such as transmittance, autofluorescence, refractive index,
and surface roughness. A straightforward yet resilient printing and post-treatment protocol was formulated, facilitating the fabrication of optical components with over 80% transmittance, minimal intrinsic fluorescence, and surface quality that is compatible with exacting optical applications. The fabricated components demonstrated excellent dimensional fidelity to digital designs and high reproducibility. To demonstrate the versatility of this approach, aspherical, miniaturized, and freeform lenses were designed and integrated into three fluorogenic sensing systems, including oil (strip-based) and chlorine (microfluidic-based) detection platforms, as well as a smartphone-based SARS-CoV-2 biosensor. The integration of customized 3D-printed optics has been demonstrated to enhance signal collection and readout performance, thereby highlighting the potential of this approach to
democratize the rapid prototyping and deployment of miniaturized optical systems. This work
represents a significant advancement in the field of additive manufacturing, particularly in relation to the development of functional photonic devices. Furthermore, it opens new prospects for sensor applications in biosensing, microfluidics, imaging, and integrated optics.
KW - 3D-printing
KW - Free-form
KW - Prototyping
KW - Optical resin
KW - Surface finishing
KW - Fluorescence
KW - Sensor
PY - 2026
DO - https://doi.org/10.37188/lam.2026.024
VL - 7
SP - 1
EP - 19
PB - Light Publishing Group
CY - Changchun
AN - OPUS4-65555
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Influence of Surface Chemistry and Size on the Stability of β-NaYF4:Yb,Er Nanocrystals in Various Environments
N2 - The use of inorganic lanthanide-doped upconversion nanoparticles (UCNP) in bioimaging and cellular studies requires biocompatible particles. One possible cause of UCNP toxicity is the release of potentially harmful fluoride and lanthanide ions as revealed by dilution studies in aqueous environments, particularly under high dilution conditions. To address this issue, suitable surface coatings preventing such effects in combination with fast screening methods suited for online monitoring and in situ analyses are desired.
Here we present systematic studies of differently sized β-NaYF4:Yb,Er UCNP stabilized with different surface coatings and hydrophilic ligands varying in binding strength to the particle surface in various aqueous environments at different temperatures and UCNP concentrations. The concentration of the fluoride and lanthanide ions released upon particle dissolution was quantified electrochemically with a fluoride ion-sensitive electrode and inductively coupled plasma optical emission spectrometry (ICP-OES) and monitored fluorometrically, thereby exploiting the sensitivity of the upconversion luminescence to changes in size and surface chemistry. Moreover, changes in surface chemistry were determined with X-Ray photoelectron spectroscopy (XPS). Based upon our results, we could derive optimum screening parameters for UCNP stability studies and determine conditions and coating procedures and ligands for enhancing UCNP stability in aqueous environments.
T2 - UPCON2021
CY - Online meeting
DA - 06.04.2021
KW - Fluorescence
KW - Lifetime
KW - Method
KW - Quantification
KW - Stability
KW - Coating
KW - Surface chemistry
KW - Lanthanide
KW - Fluoride
KW - Electrochemistry
KW - ICP-OES
KW - Upconversion
KW - Nano
KW - Particle
KW - Aging
KW - Quality assurance
KW - Mass spectrometry
KW - XPS
PY - 2021
AN - OPUS4-52411
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kossatz, Philipp
A1 - Mezhov, Alexander
A1 - Andresen, Elina
A1 - Prinz, Carsten
A1 - Schmidt, Wolfram
A1 - Resch-Genger, Ute
T1 - Assessing the Applicability of Lanthanide-Based Upconverting Nanoparticles for Optically Monitoring Cement Hydration and Tagging Building Materials
N2 - Chemically stable, lanthanide-based photon upconversion micro- and nanoparticles (UCNPs) with their characteristic multicolor emission bands in the ultraviolet (UV), visible (vis), near-infrared (NIR), and short-wave infrared (SWIR) arepromising optical reporters and barcoding tags. To assess the applicability of UCNPs for the monitoring of early stage cement hydration processes and as authentication tags for cementitious materials, we screened the evolution of the luminescence of Selfmade core-only NaYF4:Yb,Er UCNPs and commercial μm-sized Y2O2S:Yb,Er particles during the first stages of cement hydration, which largely determines the future properties of the hardened material. Parameters explored from the UCNP side included particle size, morphology, surface chemistry or coating, luminescence properties, and concentration in different cement mixtures. From the cement side, the influence of the mineral composition of the cement matrix was representatively examined for ordinary Portland cement (OPC) and its constituents tricalcium aluminate (C3A), tricalcium silicate (C3S), and gypsum at different water to cement ratios. Based on reflection and luminescence measurements, enabling online monitoring, which were complemented by XRD and isothermal heat-flow calorimetric measurements to determine whether the incorporation of these particles could impair cement hydration processes, well suited lanthanide particle reporters could be identified as well as application conditions. In addition, thereby the reporter influence on cement hydration kinetics could be minimized while still preserving a high level of information content. The best performance for the luminescence probing of changes during early stage cement hydration processes was observed for 25 nm-sized oleate (OA)-coated UCNPs added in a concentration of 0.1 wt %. Higher UCNP amounts of 1.0 wt % delayed cement hydration processes size- and surface coatingspecifically in the first 24 h. Subsequent luminescence stability screening studies performed over a period of about one year support the applicability of UCNPs as optical authentication tags for construction materials.
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Quantum yield
KW - NIR
KW - Mechanism
KW - Characterization
KW - XRD
KW - Calorimetry
KW - Advanced material
KW - Cement
KW - Monitoring
KW - Surface
KW - Size
KW - Lifetime
KW - Barcode
KW - Lanthanide
KW - Upconversion
KW - Encoding
KW - Method
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-638318
DO - https://doi.org/10.1021/acsomega.5c02236
SN - 2470-1343
VL - 10
IS - 29
SP - 31587
EP - 31599
PB - ACS Publications
CY - Washington, DC
AN - OPUS4-63831
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Saleh, Maysoon I.
A1 - Rühle, Bastian
A1 - Wang, Shu
A1 - Radnik, Jörg
A1 - You, Yi
A1 - Resch-Genger, Ute
T1 - Assessing the protective effects of different surface coatings on NaYF4:YB3+, Er3+, upconverting nanoparticles in buffer and DMEM
N2 - We studied the dissolution behavior of β NaYF4:Yb(20%), Er(2%) UCNP of two different sizes in biologically relevant media i.e., water (neutral pH), phosphate buffered saline (PBS), and Dulbecco’s modified Eagle medium (DMEM) at different temperatures and particle concentrations. Special emphasis was dedicated to assess the influence of different surface functionalizations, particularly the potential of mesoporous and microporous silica shells of different thicknesses for UCNP stabilization and protection. Dissolution was quantified electrochemically using a fluoride ion selective electrode (ISE) and by inductively coupled plasma optical emission spectrometry (ICP OES). In addition, dissolution was monitored fluorometrically. These experiments revealed that a thick microporous silica shell drastically decreased dissolution. Our results also underline the critical influence of the chemical composition of the aqueous environment on UCNP dissolution. In DMEM, we observed the formation of a layer of adsorbed molecules on the UCNP surface that protected the UCNP from dissolution and enhanced their fluorescence. Examination of this layer by X ray photoelectron spectroscopy (XPS) and mass spectrometry (MS) suggested that mainly phenylalanine, lysine, and glucose are adsorbed from DMEM. These findings should be considered in the future for cellular toxicity studies with UCNP and other nanoparticles and the design of new biocompatible surface coatings.
KW - Fluorescence
KW - Lifetime
KW - Method
KW - Quantification
KW - Stability
KW - Coating
KW - Surface chemistry
KW - Lanthanide
KW - Fluoride
KW - Electrochemistry
KW - ICP-OES
KW - Upconversion
KW - Nano
KW - Particle
KW - Aging
KW - Quality assurance
KW - Mass spectrometry
KW - XPS
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-515984
DO - https://doi.org/10.1038/s41598-020-76116-z
SN - 2045-2322
VL - 10
IS - 1
SP - 19318-1
EP - 19318-11
PB - Springer Nature
CY - London
AN - OPUS4-51598
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Tavernaro, Isabella
A1 - Rajotte, Isabelle
A1 - Thibeault, Marie-Pier
A1 - Sander, Philipp C.
A1 - Kodra, Oltion
A1 - Lopinski, Gregory
A1 - Radnik, Jörg
A1 - Johnston, Linda J.
A1 - Brinkmann, Andreas
A1 - Resch-Genger, Ute
T1 - Quantifying surface groups on aminated silica nanoparticles of different size, surface chemistry, and porosity with solution NMR, XPS, optical assays, and potentiometric titration
N2 - We assessed the quantification of surface amino functional groups (FGs) for a large set of commercial and custom-made aminated silica nanoparticles (SiO2 NPs) with sizes of 20–100 nm, prepared with different sol–gel routes, different amounts of surface amino FGs, and different porosity with four methods providing different, yet connected measurands in a bilateral study of two laboratories, BAM and NRC, with the overall aim to develop standardizable measurements for surface FG quantification. Special emphasis was dedicated to traceable quantitative magnetic resonance spectroscopy (qNMR) performed with dissolved SiO2 NPs. For the cost efficient and automatable screening of the amount of surface amino FGs done in a first step of this study, the optical fluorescamine assay and a potentiometric titration method were utilized by one partner, i.e., BAM, yielding the amount of primary amino FGs accessible for the reaction with a dye precursor and the total amount of (de)protonatable FGs. These measurements, which give estimates of the minimum and maximum number of surface amino FGs, laid the basis for quantifying the amount of amino silane molecules with chemo-selective qNMR with stepwise fine-tuned workflows, involving centrifugation, drying, weighting, dissolution, measurement, and data evaluation steps jointly performed by BAM and NRC. Data comparability and relative standard deviations (RSDs) obtained by both labs were used as quality measures for method optimization and as prerequisites to identify method-inherent limitations to be later considered for standardized measurement protocols. Additionally, the nitrogen (N) to silicon (Si) ratio in the near-surface region of the SiO2 NPs was determined by both labs using X-ray photoelectron spectroscopy (XPS), a well established surface sensitive analytical method increasingly utilized for microparticles and nano-objects which is currently also in the focus of international standardization activities. Overall, our results underline the importance of multi-method characterization studies for quantifying FGs on NMs involving at least two expert laboratories for effectively identifying sources of uncertainty, validating analytical methods, and deriving NM structure–property relationships.
KW - Advanced Materials
KW - Amino Groups
KW - Calibration
KW - Characterization
KW - Functional groups
KW - Method Comparison
KW - Nano Particle
KW - Validation
KW - XPS
KW - Optical Assay
KW - Quantification
KW - Surface Analysis
KW - Reference Materials
KW - Synthesis
KW - Fluorescence
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-649992
DO - https://doi.org/10.1039/d5na00794a
VL - 7
IS - 21
SP - 6888
EP - 6900
PB - Royal Society of Chemistry
AN - OPUS4-64999
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - The emp project smurfnano – Standardizing the quantification of surface functionalities, ligands, and coatings on nanomaterials
N2 - For industrial applications such as medical diagnostics, drug delivery, sensing, catalysis, energy conversion and storage, opto-electronics, and information storage, meanwhile engineered nanoparticles (NPs) with various chemical compositions and surface functionalities are routinely fabricated. NP function, interaction with biological species, and environmental fate are largely determined by surface functionalities. Reliable, reproducible, and standardized surface characterization methods are therefore vital for quality control of NPs, and mandatory to meet increasing concerns regarding their safety. Also, industry, international standardization organizations, regulatory agencies, and policymakers need validated and standardized measurement methods and reference materials.
These needs are addressed by the recently started European metrology project SMURFnano involving 12 partners from different National Metrology Institutes, designated institutes, and research institutes, two university groups as well as one large company and one SME producing NPs. This project as well as first results derived from the development of test and reference materials with a well characterized surface chemistry and ongoing interlaboratory comparisons will be presented.
T2 - LNE Workshop
CY - Paris, France
DA - 04.11.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Characterization
KW - Advanced material
KW - Surface
KW - Standardization
KW - Reference material
KW - Functional group
KW - Quantification
KW - Coating
KW - Automation
KW - Potentiometry
KW - Method
KW - Validation
KW - Optical assay
KW - Fluram
KW - qNMR
KW - Comparison
KW - ILC
PY - 2025
AN - OPUS4-64725
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Tavernaro, Isabella
A1 - Abram, Sarah-Luise
A1 - Homann, Christian
A1 - Scholtz, Lena
A1 - Radnik, Jörg
A1 - Resch-Genger, Ute
T1 - Validated and standardized measurements and quantification of surface functionalities on nanoparticles
N2 - Surface-functionalized organic and inorganic engineered nanomaterials (NMs) are widely applied in the life and materials sciences. NM performance depends on key factors such as particle size and shape, crystal phase, morphology, chemical composition, and surface chemistry, i.e., surface coatings, functional groups (FGs), and ligands.1 The latter controls their processability and interaction with the environment and largely their possible toxicity. Thus, methods for FG quantification are important tools for quality control of NM production processes and can foster the sustainable development of functional and safe(r) NMs. This underlines the importance of validated and standardized analytical methods for surface analysis and reference materials.2 This encouraged us to explore simple and versatile tools for quantifying common bioanalytically relevant FGs such as optical assays, electrochemical titration methods, quantitative nuclear magnetic resonance spectroscopy (qNMR), and X-Ray photoelectron spectroscopy (XPS) and to perform a first interlaboratory comparison (ILC) on surface FG quantification.3,4 In a follow-up ILC, BAM and NRC explored qNMR sample preparation, measurement, and data evaluation protocols for commercial and custom-made aminated SiO2 NPs with sizes of 20-100 nm, different amounts of surface amino FGs, and different porosity.5,6 First, the number of amino FGs accessible for a dye reporter was determined with a cost-efficient, automated optical fluorescamine assay. Then, qNMR workflows and protocols were stepwise fine-tuned. The qNMR ILC was complemented by joint XPS measurements. BAM also examined the applicability of fast and automatable potentiometric titrations to screen the total amount of (de)protonable FGs on aminated SiO2 NPs. Our results underline the need to evaluate protocols for FG quantification in ILCs and the advantages of multi-method characterization strategies for efficient method cross validation.
T2 - Surface and Micro/Nano Analysis Working Group
CY - Paris, France
DA - 08.04.2025
KW - Quality assurance
KW - Reference material
KW - Fluorescence
KW - Nano
KW - Particle
KW - Surface analysis
KW - XPS
KW - Traceability
KW - Metrology
KW - Calibration
KW - Reference data
KW - Reference product
KW - Digital certificate
KW - QNMR
KW - Potentiometry
PY - 2025
AN - OPUS4-62969
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Quantifying the total and accessible amount of surface functionalities and ligands on nano-materials: Overview and recommended methods
N2 - Engineered nanoparticles (NPs) with various chemical compositions and surface functionalities are routinely fabricated for industrial applications such as medical diagnostics, drug delivery, sensing, catalysis, energy conversion and storage, opto-electronics, and information storage. NP function, interaction with biological species, and environmental fate are largely determined by surface functionalities. This calls for reliable, reproducible, and standardized surface characterization methods, which are vital for quality control of NPs, and mandatory to meet increasing concerns regarding their safety. Validated and standardized workflows for surface analysis are also increasingly requested by industry, international standardization organizations, regulatory agencies, and policymakers. To establish comparable measurements of surface functionalities across different labs and ease instrument performance validation, reference test materials and reference materials of known surface chemistry as well as reference data are needed.
In the following, different methods for determining surface functionalities on ligand-stabilized core and core/shell NPs include advanced techniques are presented and discussed regarding method-inherent advantages and limitations. Special emphasis is dedicated to traceable quantitative nuclear magnetic resonance (qNMR), X-ray electron spectroscopy (XPS) and time of flight secondary ion mass spectrometry (ToF-SIMS), and simpler optical and electrochemical methods.
T2 - LNE Workshop
CY - Paris, France
DA - 04.11.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Characterization
KW - Advanced material
KW - Surface
KW - Standardization
KW - Reference material
KW - Functional group
KW - Quantification
KW - Coating
KW - Automation
KW - Potentiometry
KW - Method
KW - Validation
KW - Optical assay
KW - Fluram
KW - Fluorescamine
KW - qNMR
KW - Comparison
KW - ILC
PY - 2025
AN - OPUS4-64726
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Resch-Genger, Ute
T1 - Standardized Measurements of Surface - Functionalities on Nanoparticles
N2 - Engineered nanoparticles (NPs) with various chemical compositions and surface functionalities are routinely fabricated for industrial applications such as medical diagnostics, drug delivery, sensing, catalysis, energy conversion and storage, optoelectronics, and information storage. NP function, interaction with biological species, and environmental fate are largely determined by surface functionalities. Reliable, reproducible, and standardized surface characterization methods are therefore vital for quality control of NPs, and mandatory to meet increasing concerns regarding their safety. Also, industry, international standardization organizations, regulatory agencies, and policymakers need validated and standardized measurement methods and reference materials. However, methodologies for determining NP surface properties, including the amount, chemical composition, and homogeneity of surface functionalities and coatings are largely non-standardized. Suitable methods for determining surface functionalities on ligand-stabilized core and core/shell NPs include advanced techniques such as traceable quantitative nuclear magnetic resonance (qNMR) as well as X-ray electron spectroscopy (XPS) and time of flight secondary ion mass spectrometry (ToF-SIMS), and simpler optical and electrochemical methods. The latter less costly methods are often used by SMEs, e.g., for quality control. To validate methods, establish measurement uncertainties, test reference materials, and produce reference data, international interlaboratory comparisons (ILC) on NP surface functionalization measurements are required and well characterized test and reference nanomaterials providing benchmark values.[1] These needs are addressed by the recently started European metrology project SMURFnano involving 12 partners from different National Metrology Institutes, designated institutes, and research institutes, two university groups as well as one large company and one SME producing NPs. This project as well as first results derived from the development of test and reference materials with a well characterized surface chemistry and ongoing interlaboratory comparisons will be presented.
T2 - eMRS
CY - Strasbourg, France
DA - 27.05.2025
KW - Quality assurance
KW - Fluorescence
KW - Nano
KW - Particle
KW - Synthesis
KW - Silica
KW - Upconversion nanoparticles
KW - Optical assay
KW - qNMR
KW - Surface analysis
KW - Ligand
KW - Quantification
KW - Functional group
KW - XPS
KW - ToF-SIMS
KW - Polymer particle
KW - Surface modification
KW - Potentiometry
KW - Metrology
KW - Method
KW - Validation
KW - ILC
PY - 2025
AN - OPUS4-63339
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Costa, Elena
A1 - Climent Terol, Estela
A1 - Ast, S.
A1 - Weller, Michael G.
A1 - Canning, J.
A1 - Rurack, Knut
T1 - Development of a lateral flow test for rapid pyrethroid detection using antibody-gated indicator-releasing hybrid materials
N2 - The employment of type-I pyrethroids for airplane disinfection in recent years underlines the necessity to develop sensing schemes for the rapid detection of these pesticides directly at the point-of-use. Antibody-gated indicator-releasing materials were thus developed and implemented with test strips for lateral-flow assay-based analysis employing a smartphone for readout. Besides a proper matching of pore sizes and gating macromolecules, the functionalization of both the material's outer surface as well as the strips with PEG chains enhanced system performance. This simple assay allowed for the detection of permethrin as a target molecule at concentrations down to the lower ppb level in less than 5 minutes.
KW - Lateral flow test
KW - Gated hybrid material
KW - Fluorescence
KW - Smartphone readout device
KW - Pyrethroid
KW - Pesticide
KW - Insecticide
KW - SBA-15
KW - Permethrin
PY - 2020
DO - https://doi.org/10.1039/d0an00319k
SN - 0003-2654
SN - 1364-5528
VL - 145
IS - 10
SP - 3490
EP - 3494
PB - Royal Society of Chemistry
CY - Cambridge
AN - OPUS4-50756
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
ED - Resch-Genger, Ute
ED - Koch, Matthias
ED - Meermann, Björn
ED - Weller, Michael G.
T1 - Topical collection: Analytical methods and applications in the materials and life sciences
N2 - Current trends in materials and life sciences are flanked by the need to push detection limits to single molecules or single cells, enable the characterization of increasingly complex matrices or sophisticated nanostructures, speed up the time of analysis, reduce instrument complexity and costs, and improve the reliability of data. This requires suitable analytical tools such as spectroscopic, separation and imaging techniques, mass spectrometry, and hyphenated techniques as well as sensors and their adaptation to application-specific challenges in the environmental, food, consumer product, health sector, nanotechnology, and bioanalysis. Increasing concerns about health threatening known or emerging pollutants in drinking water, consumer products, and food and about the safety of nanomaterials led to a new awareness of the importance of analytical sciences. Another important driver in this direction is the increasing demand by legislation, particularly in view of the 17 sustainable development goals by the United Nations addressing clean energy, industry, and innovation, sustainable cities, clean water, and responsible consumption and production. In this respect, also the development of analytical methods that enable the characterization of material flows in production processes and support recycling concepts of precious raw materials becomes more and more relevant. In the future, this will provide the basis for greener production in the chemical industry utilizing recycled or sustainable starting materials.
This makes analytical chemistry an essential player in terms of the circular economy helping to increase the sustainability of production processes. In the life sciences sector, products based on proteins, such as therapeutic and diagnostic antibodies, increase in importance. These increasingly biotechnologically produced functional biomolecules pose a high level of complexity of matrix and structural features that can be met only by highly advanced methods for separation, characterization, and detection. In addition, metrological traceability and target definition are still significant challenges for the future, particularly in the life sciences.
However, innovative reference materials as required for the health and food sector and the characterization of advanced materials can only be developed when suitable analytical protocols are available. The so-called reproducibility crisis in sciences underlines the importance of improved measures of quality control for all kinds of measurements and material characterization. This calls for thorough method validation concepts, suitable reference materials, and regular interlaboratory comparisons of measurements as well as better training of scientists in analytical sciences.
The important contribution of analytical sciences to these developments is highlighted by a broad collection of research papers, trend articles, and critical reviews from these different application fields. Special emphasis is dedicated to often-overlooked quality assurance and reference materials.
T2 - 150 years BAM: Science with impact
CY - Berlin, Germany
DA - 01.01.2021
KW - 150th anniversary
KW - ABC
KW - Analysis
KW - Analytical sciences
KW - BAM
KW - Collection
KW - Environment
KW - Fluorescence
KW - Life sciences
KW - Limit of detection
KW - Material sciences
KW - Method
KW - Nanoparticle
KW - Pollutant
KW - Quality assurance
KW - Reference material
KW - Sensor
KW - Special issue
KW - Bundesanstalt für Materialforschung und -prüfung
KW - Jahrestag
PY - 2022
UR - https://link.springer.com/journal/216/topicalCollection/AC_16a2ef9b81853377e321ef84d9c4a431
SN - 1618-2642
SN - 1618-2650
VL - 414
SP - 4267
EP - 4529
PB - Springer
CY - Berlin
AN - OPUS4-55670
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Resch-Genger, Ute
A1 - Meermann, Björn
A1 - Koch, Matthias
A1 - Weller, Michael G.
T1 - Editorial: Analytical methods and applications in materials and life sciences
N2 - Current trends in materials and life sciences are flanked by the need to push detection limits to single molecules or single cells, enable the characterization of increasingly complex matrices or sophisticated nanostructures, speed up the time of analysis, reduce instrument complexity and costs, and improve the reliability of data. This requires suitable analytical tools such as spectroscopic, separation and imaging techniques, mass spectrometry, and hyphenated techniques as well as sensors and their adaptation to application-specific challenges in the environmental, food, consumer product, health sector, nanotechnology, and bioanalysis. Increasing concerns about health threatening known or emerging pollutants in drinking water, consumer products, and food and about the safety of nanomaterials led to a new awareness of the importance of analytical sciences. Another important driver in this direction is the increasing demand by legislation, particularly in view of the 17 sustainable development goals by the United Nations addressing clean energy, industry, and innovation, sustainable cities, clean water, and responsible consumption and production. In this respect, also the development of analytical methods that enable the characterization of material flows in production processes and support recycling concepts of precious raw materials becomes more and more relevant. In the future, this will provide the basis for greener production in the chemical industry utilizing recycled or sustainable starting materials.
This makes analytical chemistry an essential player in terms of the circular economy helping to increase the sustainability of production processes. In the life sciences sector, products based on proteins, such as therapeutic and diagnostic antibodies, increase in importance. These increasingly biotechnologically produced functional biomolecules pose a high level of complexity of matrix and structural features that can be met only by highly advanced methods for separation, characterization, and detection. In addition, metrological traceability and target definition are still significant challenges for the future, particularly in the life sciences.
However, innovative reference materials as required for the health and food sector and the characterization of advanced materials can only be developed when suitable analytical protocols are available. The so-called reproducibility crisis in sciences underlines the importance of improved measures of quality control for all kinds of measurements and material characterization. This calls for thorough method validation concepts, suitable reference materials, and regular interlaboratory comparisons of measurements as well as better training of scientists in analytical sciences.
The important contribution of analytical sciences to these developments is highlighted by a broad collection of research papers, trend articles, and critical reviews from these different application fields. Special emphasis is dedicated to often-overlooked quality assurance and reference materials.
T2 - 150 years BAM: Science with impact
CY - Berlin, Germany
DA - 01.01.2021
KW - Analysis
KW - Life sciences
KW - Analytical sciences
KW - Quality assurance
KW - Reference material
KW - Fluorescence
KW - Nanoparticle
KW - Sensor
KW - Material sciences
KW - Pollutant
KW - Environment
KW - Method
KW - Limit of detection
KW - 150th anniversary
KW - ABC
KW - BAM
KW - Collection
KW - Editorial
KW - Special issue
KW - Bundesanstalt für Materialforschung und -prüfung
KW - Jahrestag
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550720
DO - https://doi.org/10.1007/s00216-022-04082-8
SN - 1618-2642
SN - 1618-2650
VL - 414
IS - Topical collection: Analytical methods and applications in the materials and life sciences
SP - 4267
EP - 4268
PB - Springer
CY - Berlin
AN - OPUS4-55072
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Hernández García, María Amparo
T1 - SAF-based optical biosensor with 3D-printed free-form optics for targeted explosives immuno-detection
N2 - Guaranteeing safety and security of citizens requires a significant effort and innovative tools from national and international agencies and governments, especially when it comes to the field of explosives detection. The need to detect Improvised Explosive Devices (IEDs) and Home-made Explosives (HMEs) at a point of suspicion, has grown rapidly due to the ease with which the precursors can be obtained and the reagents synthesised. The limited availability of immunoanalytical tools for HME detection presents an opportunity for the development of new devices, which enable a rapid detection and recognise the target analyte with high specificity and sensitivity. In this work, we introduce an optical biosensor for highly specific and sensitive HME detection. The immunoassay system is placed in a hydrogel environment permeable to the analyte and transparent to light interrogating the fluorescently labelled antibodies. The readout of the immunoanalytical system is realized with Supercritical Angle Fluorescence (SAF), an advanced microscopy technique. To accomplish this, we made use of recent, commercial high resolution (< 22 µm) Liquid Crystal Display 3D printers to fabricate a parabolic optical element with high refractive index (RI>1.5) and transmission values (>90%) from photo-resin. Aiming at a new generation of sensors, which not only can meet the requirements of trace detection, but can also be used for substance identification, the combination of immunoanalytical recognition with SAF detection offers a modularity and versatility that is principally well suitable for the measurements of target analytes at trace levels.
T2 - 8th International conference in Biosensing Technology
CY - Seville, Spain
DA - 12.05.2024
KW - 3D printing
KW - Biosensor
KW - Fluorescence
KW - Explosives
PY - 2024
AN - OPUS4-60561
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Paul, Martin
T1 - Fast Detection of TNT at ppt Level by an Immunofluorometric Biosensor
N2 - The mechanism of this system is based on kinetic competition. This biosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. If the explosive 2,4,6-trinitrotoluene (TNT) is introduced some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein. The fluorescence is detected by highly sensitive laser-induced fluorescence with a conventional CMOS camera. The system achieved limits of detection of approx.1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of TNT. The total assay time is less than 8 minutes. A cross-reactivity test with 5000 pM solutions of pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) showed no cross reactivity.
T2 - Doktorandenseminar 2020 des Arbeitskreis-Prozessanalytik
CY - Online meeting
DA - 21.09.2020
KW - TNT
KW - Explosive
KW - Antibody
KW - Fluorescence
KW - Biosensor
KW - Affinity
PY - 2020
AN - OPUS4-51314
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Paul, Martin
A1 - Weller, Michael G.
T1 - Antibody screening by microarray technology - Direct identification of selective high-affinity clones
N2 - The primary screening of hybridoma cells is a time-critical and laborious step during the development of monoclonal antibodies. Often, critical errors occur in this phase, which supports the notion that the generation of monoclonal antibodies with hybridoma technology is difficult to control and hence, a risky venture. We think that it is crucial to improve the screening process to eliminate most of the critical deficits of the conventional approach. With this new microarray-based procedure, several advances could be achieved: Selectivity for excellent binders, high-throughput, reproducible signals, avoidance of misleading avidity (multivalency) effects, and performance of simultaneous competition experiments. The latter can also be used to select clones of desired cross-reactivity properties. In this paper, a model system with two excellent clones against carbamazepine, two weak clones, and blank supernatant containing fetal bovine serum was designed to examine the effectiveness of the new system. The excellent clones could be detected largely independent of the immunoglobulin G (IgG) concentration, which is usually unknown during the clone screening since the determination and subsequent adjustment of the antibody concentration are not feasible in most cases. Furthermore, in this approach, the enrichment, isolation, and purification of IgG for characterization is not necessary. Raw cell culture supernatant can be used directly, even when fetal calf serum (FCS) or other complex media is used. In addition, an improved method for the oriented antibody-immobilization on epoxy-silanized slides is presented. Based on the results of this model system with simulated hybridoma supernatants, we conclude that this approach should be preferable to most other protocols leading to many false positives, causing expensive and lengthy elimination steps to weed out the poor clones.
KW - ELISA
KW - Immunoassay
KW - Microarray
KW - Lab-on-a-chip
KW - Miniaturization
KW - Aautomatisation
KW - HTS
KW - High-throughput
KW - Screening
KW - Fluorescence
KW - Label
KW - Hybridoma
KW - Inhibition
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-503361
DO - https://doi.org/10.3390/antib9010001
SN - 2073-4468
VL - 9
IS - 1
SP - 1
EP - 16
PB - MDPI
CY - Basel
AN - OPUS4-50336
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -