TY - CONF A1 - Soruco Aloisio, Ricardo T1 - Digitale Abbildung von Assets - Dateninfrastruktur für Industrie 4.0 N2 - Im Rahmen der von der BAM und anderen Partnern ins Leben gerufenen Initiative „Digitale Qualitätsinfrastruktur“ liegt der Fokus u.a. auf der Entwicklung von neuen Zertifizierungsworkflows. Dabei ist eine besondere Bedeutung dem Zusammenführen von Operational Technology (OT) und Informationstechnik (IT) beizumessen. Zur Datenintegration aus der Sensor-Feldebene einer Versuchs-Wasserstofftankstelle wurde eine solche Infrastruktur aufgebaut. Zudem wurde der von der Plattform Industrie 4.0 empfohlene standardisierte Zwilling „Verwaltungsschale“ für einige Assets der Wasserstofftankstelle implementiert. T2 - QI-Forum 2024 CY - Berlin, Germany DA - 09.10.2024 KW - Datenintregration KW - IT KW - Infrastruktur KW - OT KW - Open Source KW - Software KW - VPN KW - Verwaltungsschale PY - 2024 AN - OPUS4-63493 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klaus, Christian T1 - QI Digital: Cross-Location IT Infrastructure and Asset Administration Shell as a Digital Twin N2 - Im Rahmen der von der BAM und anderen Partnern ins Leben gerufenen Initiative „Digitale Qualitätsinfrastruktur“ liegt der Fokus u.a. auf der Entwicklung von neuen Zertifizierungsworkflows. Dabei ist eine besondere Bedeutung dem Zusammenführen von Operational Technology (OT) und Informationstechnik (IT) beizumessen. Zur Datenintegration aus der Sensor-Feldebene einer Versuchs-Wasserstofftankstelle wurde eine solche Infrastruktur zunächst in einer Laborumgebung aufgebaut. Dieser Vortrag beschreibt die Implementierung des standardisierten und von der Plattform Industrie 4.0 empfohlenen digitalen Zwillings "Verwaltungsschale" an dieser Wasserstofftankstelle. Außerdem wird die Implementierung einer standortübergreifenden IT-Infrastruktur über VPN/5G beschrieben. T2 - BAM Kolloquium Abteilung 1 CY - Berlin, Germany DA - 10.06.2025 KW - Datenintregration KW - IT KW - Infrastruktur KW - OT KW - Open Source KW - Software KW - VPN KW - Verwaltungsschale PY - 2025 AN - OPUS4-63495 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krentel, Daniel T1 - Einsatz von Körpermnodellen bei der Auswirkungsbetrachtung auf das "System Mensch" N2 - In diesem Vortrag werden aktuelle Arbeiten der BAM zu Auswirkungsbetrachtungen bei Stoff- und Energiefreisetzungen mit Zielstellung der Erfassung und Beurteilung der Einwirkungen auf den Menschen vorgestellt. T2 - 3. DUMMY.CRASHTEST.KONFERENZ. CY - Münster, Germany DA - 20.06.2023 KW - Auswirkungsbetrachtung KW - Dummy KW - Körpermodell PY - 2023 AN - OPUS4-57747 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Investigation of Shock Wave Propagation in Soft Tissue Simulants: An Analysis of Organic Gelatin and Synthetic Gel N2 - This study investigates the effects of shock waves on soft tissue simulants, focusing on organic gelatin and a synthetic gel. Although extensive research has focused on the mechanical properties of soft tissue simulants, their behavior under shock wave conditions, such as those caused by blasts, is less understood. As explosives are increasingly used in modern combat scenarios, it is essential to study how shock waves interact with soft tissue. This knowledge is crucial for improving protective equipment and evaluating blast effects on the human body. A two-phase methodology was applied: First, organic gelatin production and synthetic gel composition were analyzed, identifying uncertainties and measuring sound speeds at varying temperatures to align with human tissue properties. Second, simulants were subjected to free-field shock waves, and embedded pressure sensors captured wave propagation, peak overpressures, and propagation velocity. Findings provide comparative insights into shock wave responses of simulants, offering a foundation for future experimental setups. KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Druckwelle PY - 2025 SN - 9781605956978 VL - 34 SP - 63 EP - 79 PB - DEStech Publications Inc. CY - USA AN - OPUS4-63320 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik A1 - Grobert, Steffen A1 - Krentel, Daniel T1 - Description of a measurement setup for the combined measurement of LLB exposures in dynamic situations using high-resolution measurement technology N2 - In order to gain an understanding of the Low Level Blast (LLB) exposure of soldiers when using weapon systems, it is necessary to characterize these weapon systems with regard to their overpressure effect [1]. Carrying out static measurements of weapon systems in the rough terrain of firing ranges and training areas poses a challenge for sensitive measurement technology. Furthermore, soldiers are often exposed to LLB in dynamic situations [2]. Therefore, commercially available blast gauges are often used, which, however, are not sufficient for high-resolution measurement of overpressure exposures with academic requirements due to their intended use [3]. Static measurement setups, such as with penile probes, must be used to characterize weapon systems, but they cannot make valid statements about the real load on dynamically behaving soldiers. However, this real load on the soldier is essential in order to be able to adequately assess the potential resulting medical effects. As part of this challenging measurement task, a prototype of a self-sufficient, high-resolution measurement system is presented, which can be used by an operator in dynamic situations without interference. The complete measuring chain was realized as a self-sufficient unit. The system is based on a 20-liter backpack system, which contains the power supply, the measuring amplifier and the measuring card. The measuring computer is attached to the front of the backpack to allow quick access. The measuring system is capable of recording four channels with a sampling rate of up to 2 MHz. Piezoelectric integrated charge pressure sensors are used as a high-resolution pressure sensor (type: PCB138B32). The pressure sensor is placed on a XX- carrier plates with the dimensions XY × YY. The pressure sensors are attached at the typical positions for Blast-Gauges measurements, like on the left shoulder, on the upper chest and on the back of the head. At the same time, commercial blast gauges are placed at the positions of the pressure sensors to qualify the blast gauges (type: B3 Blast Gauges Gen 6). The measuring system is referred to as a “Sensor Carrier Operator (StEk)”. As part of the functional testing of the measurement system, tests are carried out with hand weapons. For this purpose, a soldier is equipped with the StEk and blast gauges. The handguns used are the pistole P8 (caliber 9 mm) and the long rifle G36 (caliber 5.56 mm). The firing position is standing freehand. In addition, the soldier carried out an examination of the carrying comfort of the StEk as part of the training. Furthermore, it was evaluated whether the measuring chain was adequately integrated into the measuring system. The quality of the pressure measurement was also examined, whereby a direct comparison was made with the blast gauges. The measurement system presented here enables the combined (static and dynamic) scientific characterization of weapon systems, particularly with regard to overpressure loading. T2 - Research Specialist Meeting HFM 371 (NATO STO) CY - Toronto, Canada DA - 09.04.2025 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Low Level Blast PY - 2025 SP - 1 EP - 8 AN - OPUS4-63322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Use of the shockwave generator for research on low-level blast effects - Monitoring vs. measurement tools N2 - In order to contribute to the research efforts on primary explosion effects, an experimental setup was created to generate realistic overpressure load cases under the most reproducible conditions and with short setup times. One focus of the project is now the applicability of this test setup for Low Level Blast (LLB) testing [1-3]. The basis of our experimental setup is the Shockwave Generator (SWG), which has already been presented in detail [4]. In addition, a stand-alone measurement system has been developed that can be worn by the operators who are exposed to LLB. The measuring system is referred to as the ´Sensor Carrier for Operator´ (StEk; German abbr.: Sensortraeger Einsatzkraft). With the StEk, it is possible to record LLB exposures in training scenarios with a measuring accuracy satisfying scientific requirements and thus to classify the corresponding LLB load case of the respective weapon system or training scenario. In the test series presented here, the StEk was attached to an operator dummy and exposed to an overpressure load case. The results of the StEk were compared with a pencil probe (PP), which was positioned symmetrically to the StEk in the undisturbed blast propagation area of the SWG. The aim of the test series was to compare the accuracy of the self-sufficient measurement setup StEk with the conventional pressure measurement method (PP). Conventional, market-available blast exposure monitoring device (BEMD) (type: B3 Blast Gauges Gen.6) were used in parallel to check their accuracy. Setup & Method The experimental setup is shown in Figure 1 (left). The StEk system was attached to a dummy placed at a 45° angle to the SWG pressure outlet at a distance of 1 m. A PP was placed axially mirrored. The sensors of the StEk were placed in the typical positions for BEMD. With reference to the incident shockwave, one sensor was placed on the chest (face-on) and one on the shoulder (side-on). The BEMDs were also placed in the same positions. The standalone StEk measurement system is described in the following. The complete measuring chain was realized as one stand-alone, self-sufficient unit. The system is based on a 20-liter backpack system, which contains the power supply, the measuring amplifier and the data acquisition system (DAQ) (Figure 1 (right)). The amplifier has four channels, an integrated 50 kHz low pass filter and is suitable for use with integrated charge piezoelectric (ICP) pressure sensors. A sampling rate of up to 2 MHz can be used Data is stored in a buffer of 64 MS. The computer, a Tablet PC, is attached to the front of the backpack to allow quick access. The pressure sensors are connected to the BNC interfaces on the outside of the housing using coiled BNC cables. The coiled BNC cables allow maximum freedom of movement and reduce mechanical stress on the couplings. In the current configuration, up to four ICP pressure sensors can be mounted on the operator (type: PCB132B38). The pressure sensors are flush-mounted in a 30 mm × 30 mm carrier plate. Results & Discussion Figure 2 (a) shows the overpressure generated by the SWG measured with the PP. The idealized pressure curve can be seen. The second peak is a reflection that occurs within the SWG. Figure 2 (b) shows the pressure measured by the BEMDs. It can be seen that both pressure curves correspond approximately to the idealized pressure curve. This is remarkable because the chest sensor was facing forward and should have a dynamic pressure component caused by the movement of the gas [5]. However, the pressure curves in Figure 2 (b) show the idealized pressure curve that should occur with a side-on overpressure measurement in the undisturbed free field. Therefore, it can be assumed that software modeling is used to generate an idealized pressure curve from the blended pressure curve that is intended to represent the overpressure that will occur. Figure 2 (c) shows the pressure curves of the ICP pressure sensors of the StEk system. It can be seen that the characteristics of the pressure curves were affected by the dynamic pressure component. The shoulder sensor, which, due to the nature of the dummy posture and position, was not exposed perfectly side-on, also showed a dynamic component. Calculations based on the peak overpressures of the PP confirm, that the reflected pressure was visible on the face-on chest sensor [5]. A limiting factor is that the sensor mounts and the dummy itself are subject to mechanical excitation, which probably explains the interference frequency seen in the pressure signal. The test results show the limitations of BEMDs for scientific investigations of weapon systems, as it is assumed that a high degree of modeling of the pressure curves takes place during post-processing. However, as the comparison of the BEMDs with the PP pressure curves shows, the pressure curve fit matches the PP pressure curve sufficiently well. This shows that a scientific measurement system such as StEk should be used initially to investigate and assess the load case from weapon systems or training scenarios in order to capture the real and complete characteristics of the load case. T2 - 8th International Forum on Blast Injury Countermeasures CY - Tokio, Japan DA - 07.05.2025 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Low Level Blast PY - 2025 AN - OPUS4-63318 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Description of a measurement setup for LLB exposures in dynamic situations using high-resolution measurement technology N2 - In order to gain an understanding of the Low Level Blast (LLB) exposure of soldiers when using weapon systems, it is necessary to characterize these weapon systems with regard to their overpressure effect [1]. Carrying out static measurements of weapon systems in the rough terrain of firing ranges and training areas poses a challenge for sensitive measurement technology. Furthermore, soldiers are often exposed to LLB in dynamic situations [2]. Therefore, commercially available blast gauges are often used, which, however, are not sufficient for high-resolution measurement of overpressure exposures with academic requirements due to their intended use [3]. Static measurement setups, such as with penile probes, must be used to characterize weapon systems, but they cannot make valid statements about the real load on dynamically behaving soldiers. However, this real load on the soldier is essential in order to be able to adequately assess the potential resulting medical effects. As part of this challenging measurement task, a prototype of a self-sufficient, high-resolution measurement system is presented, which can be used by an operator in dynamic situations without interference. The complete measuring chain was realized as a self-sufficient unit. The system is based on a 20-liter backpack system, which contains the power supply, the measuring amplifier and the measuring card (see Fig. 1, left). The measuring computer is attached to the front of the backpack to allow quick access. The measuring system is capable of recording four channels with a sampling rate of up to 2 MHz. Piezoelectric integrated charge pressure sensors are used as a high-resolution pressure sensor (type: PCB138B32). The pressure sensor is placed on a XX- carrier plates with the dimensions XY × YY. The pressure sensors are attached at the typical positions for Blast-Gauges measurements, like on the left shoulder, on the upper chest and on the back of the head. At the same time, commercial blast gauges are placed at the positions of the pressure sensors to qualify the blast gauges (type: B3 Blast Gauges Gen 6). The measuring system is referred to as a “Sensor Carrier Operator (StEk)”. As part of the functional testing of the measurement system, tests are carried out with hand weapons. For this purpose, a soldier is equipped with the StEk and blast gauges. The handguns used are the pistole P8 (caliber 9 mm) and the long rifle G36 (caliber 5.56 mm). The firing position is standing freehand. In addition, the soldier carried out an examination of the carrying comfort of the StEk as part of the training. Furthermore, it was evaluated whether the measuring chain was adequately integrated into the measuring system. The quality of the pressure measurement was also examined, whereby a direct comparison was made with the blast gauges (see Fig. 1 right). The measurement system presented here enables the combined (static and dynamic) scientific characterization of weapon systems, particularly with regard to overpressure loading. T2 - Research Specialist Meeting HFM 371 (NATO STO) CY - Toronto, Canada DA - 09.04.2025 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Low Level Blast PY - 2025 AN - OPUS4-63323 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik T1 - Investigation of Shock Wave Propagation in Soft Tissue Simulants: An Analysis of Organic Gelatin and Synthetic Gel N2 - This study investigates the effects of shock waves on soft tissue simulants, focusing on organic gelatin and a synthetic gel. Although extensive research has focused on the mechanical properties of soft tissue simulants, their behavior under shock wave conditions, such as those caused by blasts, is less understood. As explosives are increasingly used in modern combat scenarios, it is essential to study how shock waves interact with soft tissue. This knowledge is crucial for improving protective equipment and evaluating blast effects on the human body. A two-phase methodology was applied: First, organic gelatin production and synthetic gel composition were analyzed, identifying uncertainties and measuring sound speeds at varying temperatures to align with human tissue properties. Second, simulants were subjected to free-field shock waves, and embedded pressure sensors captured wave propagation, peak overpressures, and propagation velocity. Findings provide comparative insights into shock wave responses of simulants, offering a foundation for future experimental setups. T2 - 34th International Symposium on Ballistics CY - Jacksonville, FL, USA DA - 19.05.2025 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Druckwelle PY - 2025 AN - OPUS4-63321 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krentel, Daniel A1 - Grasse, Dennis A1 - Seeber, H. T1 - Mild Traumatic Brain Injury - Current Research Works in the Field of Primary Blast Injury N2 - In this presentation, the team security research of division 2.1 informs about current research efforts in the field of traumatic brain injury. The focus lies on the consequences of low-level blast on the human brain. Also the general research approaches of the team for the investigation of the behaviour of shock waves within human tissues are presented. T2 - ATLAS ENTRY Seminar CY - Göppingen, Germany DA - 21.08.2023 KW - LLB KW - Blast KW - mTBI KW - Primary blast injury KW - Traumatic brain injury PY - 2023 AN - OPUS4-58130 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeber, Henrik A1 - Grobert, Steffen T1 - Investigation of intracorporeal shock wave propagation using a simplified torso model and a shock wave generator N2 - Blast injuries are among the most common injuries in military operations. Also, in civilian environments, more explosive threats are expected in the future due to emerging conflicts and threats. While the effect of fragments, which is classified as secondary blast injury, could be minimized by police and military personnel’s modern ballistic body protection systems, the effects of shock wave propagation in the body as part of the primary explosion trauma still remain a serious threat needing further research. The detonation-physical processes of highly dynamic pressure changes within the human body, the reflection-related amplification of shock waves at organ-dermis interfaces, and the consequences of injury mechanisms have become more prominent in international research. Various approaches have been used to investigate these aspects. Animal experiments on free field test sites or shock tube setups combined with a subsequent biological evaluation and numerical simulations provided promising results and allowed the discussion of different biomechanical aspects. However, due to poor reproducibility and a lack of short-term dynamic material properties, most research approaches have significant limitations. Laboratory test setups do not represent real-scale high explosive detonation parameters with regards to pressure characteristics, impulse duration and blockage problems. Measured values are interpreted with partly outdated, selective and not validated limit values for overpressures from field tests with animals. This is due to the lack of a validated and comprehensive data set covering a variation of the crucial parameter. Injury mechanisms and their effects have not yet been sufficiently elucidated for the torso and extremities. In order to contribute to the research efforts on the primary explosion effects, the German Federal Armed Forces established an interdisciplinary military medical research project in cooperation of the Bundeswehr Hospital Berlin and the German Federal Institute for Materials Research and Testing (BAM). The aim of the planned investigation is the development of a multidisciplinary method to investigate shock wave behavior in various generic tissue simulants under the most reproducible conditions possible with realistic loads in an experimental test series with short set-up times. T2 - 7th International Forum on Blast Injury Countermeasures CY - Tokio, Japan DA - 17.05.2023 KW - Shock wave generator KW - Blast injury KW - Primäre Explosionswirkung KW - Experimental setup PY - 2023 AN - OPUS4-60045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grobert, S. T1 - Development of a body model and a shock wave generator for the analysis of intracorporeal shock wave propagations after explosions N2 - Im Rahmen dieses Vortrags wurden die ersten Ergebnisse des Sonderforschungsprojektes " Entwicklung und Validierung eines Körpermodells und eines Stoßwellengenerators zur Simulation der intrakorporalen Stoßwellenausbreitung nach Explosionen", welches in Zusammenarbeit zwischen dem Bundeswehrkrankenhaus Berlin und der BAM durchgeführt wird, vorgestellt. Der Versuchsaufbau (Stoßwellengenerator) und die verwendete Sensorik werden dargestelt, sowie eine vergeichende Studie zu den Protypen der Körpermodellen und Simulanzien. T2 - Kick-off-Workshops der NATO-Gruppe HFM 338 "Development of military loading exposure guidelines for prevention of chronic traumatic encephalopathy" CY - Online meeting DA - 18.05.2021 KW - Auswirkungsbetrachtungen KW - Blast KW - Explosionsverletzung PY - 2021 AN - OPUS4-53540 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schubert, Thomas A1 - Máca, Petr A1 - Hering, Marcus A1 - Fiedler, Georg A1 - Beckmann, Birgit T1 - Impact Experiments on Reinforced Concrete Specimens - Investigation of Repeatability and Scaling N2 - Nowadays, the impact resistance of concrete structures has become a prominent concern for critical infrastructure operators, particularly amidst escalating geopolitical tensions. Regulators and design engineers know that reinforced concrete structures can only be developed with high efficiency by considering nonlinear structural and highly nonlinear material behavior. Therefore, specific guidelines on impact design provide instructions for design and analysis of structures required to resist impact loading. These instructions are usually based on published results and evaluated data of impact experiments carried out in laboratories. To widen the knowledge and increase the scientific data the Institute of Concrete Structures (IMB) at TUD Dresden University of Technology (TUD) has carried out many impact experiments on reinforced concrete specimens in recent years. A specially designed drop tower is available for this purpose on the premises of the Otto Mohr Laboratory, TUD. In the framework of the past research at TUD some important issues, such as influence of rebar arrangement, structural thickness, scalability of specimen and repeatability, with regard to experimental impact testing were investigated. This article presents the drop tower facility and research results of impact experiments on reinforced concrete slabs. First, the scalability of impact experiments will be discussed in conjunction with already known theoretical scaling parameters provided by researchers in the past, e.g. Rüdiger et al. [1]. Scalability of experimental data is of huge importance since protective structures made of reinforced concrete differ usually in size in comparison to experimental specimens. The second important research focus is on repeatably of impact experiments. Since impact experiments are usually time consuming and expensive, a certain impact scenario is mostly carried out only once. It is intended to show the range of deviation of impact tests on some already carried out experiments on reinforced concrete slabs. A possible standard deviation is estimated for the applied test setup. T2 - 15th International Conference on Shock & Impact Loads on Structures CY - Gothenburg, Sweden DA - 12.06.2025 KW - Reinforced concrete KW - Drop-weight impact KW - Scaling KW - Repeatability KW - Digital image correlation PY - 2025 SP - 80 EP - 91 AN - OPUS4-63627 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bell, Jérémy T1 - Embedded sensor for the detection of TNT in surface and marine waters N2 - In 1945, the Potsdam Conference led to the decision to destroy a significant amount of ammunition from the warring parties of WWII. Dumping was considered the cheapest, quickest, and safest solution to dispose of unused ammunition. However, thin barrels or containers often leak after 50 years, allowing explosives to escape into the marine environment. As the effects of weapons chemicals on ecosystems are well-documented, it is becoming increasingly important to detect, recover and dispose of old ammunition. Physical techniques such as magnetometry and sonar are used to detect ammunition in the sea, but they do not provide chemical information. Detecting leaking organic contaminants like TNT or other explosives in water or soil requires high-end laboratory equipment like HPLC or GC-MS, making remote water testing virtually impossible. As an alternative, a miniaturized method for the selective and sensitive indication of TNT using fluorescence light-up sensing was developed. The visual identification of TNT with a nucleophile that forms a strongly absorbing charge transfer complex (CTC) is a well-known method. This CTC is formed by the attraction of an electron from the donor molecule by the electron-deficient aromatic ring. In this work, a TNT-based CTC was selectively formed by the addition of tetraoctylammonium acetate in N,N-diethylformamide and, as expected, showed strong absorption. Surprisingly, at room temperature, the CTC can be converted into a fluorescent product with an emission band centred at 577 nm. For the detection of TNT in water, a microfluidic chip made of polydimethylsiloxane (PDMS) is used for both the extraction and reaction steps. In addition to miniaturising the experimental steps, the optical system (fluorometer) has been integrated into an autonomous smartphone assembly capable of catalysing the photoreaction and analysing the fluorescence response. Taking advantage of the light-up response, TNT was still easily detectable down to 9.4 ng with the CMOS camera. Further evaluation of this analytical tool consisted of analyses of unfiltered and untreated surface water samples spiked directly with increasing concentrations of TNT to reflect different levels of contamination. LODs of 21 and 40 ng were found for samples from the Teltow Canal in Berlin (DEU) and the Baltic Sea near Greifswald (DEU). Such an analytical tool could be used to monitor water quality in the field, as the release of organic pollutants from munitions into surface and marine waters will become increasingly problematic and concentrations will continue to rise over the coming decades. T2 - ANAKON 2025 CY - Leipzig, Germany DA - 10.03.2025 KW - Explosives KW - Microfluidics KW - Smartphone KW - Sprengstoffe KW - Mikrofluidik KW - Sensor PY - 2025 AN - OPUS4-62767 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Empowering test strips for rapid, highly sensitive and multiplexed analysis of small molecule analytes at a point-of-need N2 - In particular, the rapid development of lateral flow assays as indispensable tools for everyone to contain the SARS-CoV-2 pandemic has fuelled the global demand for analytical tests that can be used outside dedicated laboratories. In addition to their use in medical diagnostics, rapid tests and assays have become increasingly important in various fields such as food safety, security, forensics, and environmental management. The advantage is obvious: taking the assay directly to the sample minimizes the time between suspicion and decision-making, allowing faster action. Especially today, when mobile communication devices with powerful computing capabilities and built-in cameras are ubiquitous, more people than ever before around the world have the basic skills to operate a powerful detector at their fingertips. This sets the stage for a much wider use of analytical measurements in terms of prognosis and prevention, enabling professional laypersons in particular. However, current strip-based systems are primarily focused on single parameter analysis, whether it is SARS-CoV-2 biomarkers, blood glucose levels, or lead concentrations in water samples. Industrial applications of such methods also often still rely on single-parameter assays, requiring multiple runs even for a limited number of key parameters. Overcoming these limitations depends on developing low-number multiplexing strategies that ensure robustness, reliability, speed, ease of use, and sensitivity. This lecture will give an overview of several generic approaches developed in recent years to address these challenges. It will highlight how the synergy of supramolecular (bio)chemistry, luminescence detection, hybrid (nano)materials and device miniaturization can result in powerful (bio)analytical assays that can be used at a point-of-need.1-5 Selected examples will introduce key aspects of such systems that include tailored signaling mechanisms and recognition elements, materials functionalization and device integration, including hybrid nanomaterials, gated indicator release systems, strip modification, and smartphone-based analysis. T2 - 15th Rapid Methods Europe Conference CY - Amsterdam, Netherlands DA - 06.11.2023 KW - Test strips KW - Lateral flow assays KW - Explosives KW - Pesticides KW - Rapid testing KW - Multiplexing PY - 2023 AN - OPUS4-58816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa A1 - Rurack, Knut T1 - Development of a Lab-on-a-Chip for the Detection of Nerve Agents with a Handheld Device N2 - The development of a Lab-on-a-Chip (LoC) is presented, which can detect reactive phosphorous compounds in the gas phase in combination with an optochemical hand-held sensor. The LoC prototype contains three pairs of sensing materials containing fluorescent indicator dyes in various carrier materials. By measuring the fluorescence response to phosphoryl chloride, a surrogate compound, the detection of chemical warfare agents (CWAs) in gas phase becomes possible within seconds, introducing a novel approach to CWA detection. T2 - 2023 IEEE SENSORS Conference CY - Vienna, Austria DA - 29.10.2023 KW - Lab-on-a-Chip KW - Nerve agents KW - Hand-held KW - Fluorescence KW - Toxic industrial chemicals PY - 2023 UR - https://ieeexplore.ieee.org/document/10325263 SN - 979-8-3503-0387-2 DO - https://doi.org/10.1109/SENSORS56945.2023.10325263 SP - 1 EP - 4 PB - IEEE CY - New York AN - OPUS4-59367 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bell, Jérémy A1 - Biyikal, Mustafa A1 - Rurack, Knut T1 - Embedded sensor based on tandem smartphone-microfluidic device for the detection of TNT in surface and sea waters N2 - The globe's seas were used as dumping ground after the world wars and those millions of ammunition, most of all containing 2,4,6-trinitrotoluene (TNT), represent a pressing danger for fishermen, dredging operations, submarine cable installations and tourism. We developed an extremely selective indication method for TNT based on a specific reaction that produces a highly fluorescent compound. The indication system was integrated into a microfluidic PDMS chip for the solid-liquid extraction of TNT from water samples, offering environmental monitoring possibilities. Combining the advantages of a light-up indicator, microfluidics and a smartphone as detector, the embedded sensor allows for the remote and rapid detection of TNT down to ng in surface and sea waters. T2 - µTAS 2020 CY - Online meeting DA - 05.10.2020 KW - Smartphone KW - Rapid test KW - TNT KW - Ammunition KW - Schnelltest KW - Munition PY - 2020 AN - OPUS4-51444 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rurack, Knut T1 - Development of a Lab-on-a-Chip for the Detection of Nerve Agents with a Handheld Device N2 - The development of a Lab-on-a-Chip (LoC) is presented, which can detect reactive phosphorous compounds in the gas phase in combination with an optochemical hand-held sensor. The LoC prototype contains three pairs of sensing materials containing fluorescent indicator dyes in various carrier materials. By measuring the fluorescence response to phosphoryl chloride, a surrogate compound, the detection of chemical warfare agents (CWAs) in gas phase becomes possible within seconds, introducing a novel approach to CWA detection. T2 - IEEE Sensors Conference CY - Vienna, Austria DA - 29.10.2023 KW - Chemical warfare agents KW - Lab-on-a-chip KW - Handheld sensors KW - Toxic industrial chemicals KW - Fluorescence PY - 2023 AN - OPUS4-58815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pauli, Jutta A1 - Ramírez, A. A1 - Crasselt, C. A1 - Schmidt, W. A1 - Resch-Genger, Ute T1 - Utilizing optical spectroscopy and 2',7'-difluorofluorescein to characterize the early stages of cement hydration N2 - The increasingly sophisticated nature of modern, more environmentally friendly cementitious binders requires a better understanding and control particularly of the complex, dynamic processes involved in the early phase of cement hydration. In-situ monitoring of properties of a constantly changing system over a defined period of time calls for simple, sensitive, fast, and preferably also non-invasive methods like optical spectroscopy KW - Flourescence KW - Optical probe KW - Sensor KW - Dye KW - Flourescin KW - Photophysics KW - PH KW - Quantum yield KW - Quality assurance KW - Mechanism KW - Cement KW - Concrete KW - Building material KW - Hydration KW - Process monitoring PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537176 DO - https://doi.org/10.1088/2050-6120/ac2da0 SN - 2050-6120 VL - 10 IS - 1 SP - 2 EP - 13 PB - IOP Science AN - OPUS4-53717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit T1 - Assessment of the Application of Scaling Concepts for Blast Effects Analysis N2 - Blast testing finds its implementation in several applications, e.g. for the purpose of investigation into accidental or intentional explosions, or for an assessment of the level of protection provided by a certain structural configuration. Analytical and/or semi-empirical methods are generally limited to preliminary assessments prior to blast testing. Applications of numerical simulations with hydrocodes coupled with finite element methods (FEM) can only reduce the amount of blast testing required, as these necessitate fulfillment of the fundamental prerequisites of model verification and that of model validation. Field tests are implemented for contact detonations as well as near-field blast scenarios and shock tube tests for far-field blast scenarios. However, these can be extremely resource intensive. Reliable small-scale experiments are a promising alternative. The concepts of dimensional analysis and similarity based on Buckingham’s Π-theorem (1914) have been applied in different fields. For applications to the phenomenon of shock wave propagation, Hopkinson-Cranz or cube-root scaling is a well-established concept. When it comes to scaling the structural response, research has predominantly focused on structures made of metallic materials. Scaled investigations with concrete or reinforced concrete (RC) structures remain limited. The lack of even the most basic guidelines (far from any ‘standardized scaling methods’ for blast tests) show that scaling as a method is not yet established in blast effects analysis. In this preliminary study, we present a systematic approach and evaluation of scaling of blast effects analysis for RC slabs in order to develop guidelines for resource efficient testing methods. We study the blast scenario at two different scales. The focus of these investigations has been on evaluation of scaling of dynamics using pressure sensors, acceleration sensors and fiber optic sensing cables for distributed acoustic sensing (DAS). Further, the resulting plastic behavior upon blast is characterized by distributed strain sensing (DSS) along the same cables. T2 - 27th International Symposium on Military Aspects of Blast and Shock (MABS27) CY - Colmar, France DA - 06.10.2025 KW - Blast KW - RC-slabs KW - Similarity and scaling PY - 2025 AN - OPUS4-64616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit A1 - Costard, Rene A1 - Hering, Marcus A1 - Chruscicki, Sebastian A1 - Hicke, Konstantin A1 - Hüsken, Götz T1 - Assessment of the Application of Scaling Concepts for Blast Effects Analysis N2 - Blast testing finds its implementation in several applications, e.g. for the purpose of investigation into accidental or intentional explosions, or for an assessment of the level of protection provided by a certain structural configuration. Analytical and/or semi-empirical methods are generally limited to preliminary assessments prior to blast testing. Applications of numerical simulations with hydrocodes coupled with finite element methods (FEM) can only reduce the amount of blast testing required, as these necessitate fulfillment of the fundamental prerequisites of model verification and that of model validation. Field tests are implemented for contact detonations as well as near-field blast scenarios and shock tube tests for far-field blast scenarios. However, these can be extremely resource intensive. Reliable small-scale experiments are a promising alternative. The concepts of dimensional analysis and similarity based on Buckingham’s Π-theorem (1914) have been applied in different fields. For applications to the phenomenon of shock wave propagation, Hopkinson-Cranz or cube-root scaling is a well-established concept. When it comes to scaling the structural response, research has predominantly focused on structures made of metallic materials. Scaled investigations with concrete or reinforced concrete (RC) structures remain limited. The lack of even the most basic guidelines (far from any ‘standardized scaling methods’ for blast tests) show that scaling as a method is not yet established in blast effects analysis. In this preliminary study, we present a systematic approach and evaluation of scaling of blast effects analysis for RC slabs in order to develop guidelines for resource efficient testing methods. We study the blast scenario at two different scales. The focus of these investigations has been on evaluation of scaling of dynamics using pressure sensors, acceleration sensors and fiber optic sensing cables for distributed acoustic sensing (DAS). Further, the resulting plastic behavior upon blast is characterized by distributed strain sensing (DSS) along the same cables. T2 - 27th International Symposium on Military Aspects of Blast and Shock (MABS27) CY - Colmar, France DA - 06.10.2025 KW - Similarity and scaling KW - Blast KW - RC-slabs PY - 2025 SP - 1 EP - 11 AN - OPUS4-64617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krenek, S. A1 - Eisermann, R. A1 - Failleau, G. A1 - Lu, Xin A1 - Thomas, P. A1 - Kjeldsen, H. A1 - Anhalt, K. T1 - Fibre-optic thermometry to support the clean energy transition N2 - The measurement and control of temperature plays a key role in achieving the European Green Deal targets for a low carbon energy system. Fibre-optic thermometry is an emerging technology that can improve temperature measurement in extreme environments for energy providers and industry due to its distributed sensing and immunity to electromagnetic fields. Various applications for optimisation and monitoring in the energy sector are described, covering the whole range from energy generation to transmission and consumption. However, fibre-optic thermometers have cross sensitivities to other quantities (e.g., strain and humidity) and ageing effects that need to be investigated, quantified and minimised to obtain traceable and reliable measurements. This is particularly important so that applications in critical infrastructure can benefit from future measurements that are not possible with conventional sensors. The European INFOTherm project aims to overcome the limitations that currently prevent the widespread use of fibre-optic thermometry by creating a dedicated European metrology infrastructure for research, development and calibration. First results on measurement uncertainty, improvement of measurement techniques and practical field tests are presented. KW - Industrial processes optimisation KW - Fibre-optic thermometry KW - Distributed temperature sensing KW - Traceability KW - Thermal energy storage KW - Electrical grid resilience PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-640075 DO - https://doi.org/10.1515/teme-2025-0044 SN - 2196-7113 VL - 92 IS - 9-10 SP - 392 EP - 405 PB - De Gruyter Brill AN - OPUS4-64007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liao, Chun-Man T1 - Assessment of prestress loss in a large-scale concrete bridge model under outdoor condition N2 - The presentation shows that subtle variations in coda wave velocity can capture minor temperature effects, offering a good understanding of how a outdoor prestressed concrete structure responds to environmental conditions over time. Ultimately, this work contributes to development of more comprehensive and resilient structural health monitoring strategies for prestressed concrete infrastructure. T2 - EVACES 2025 CY - Porto, Portugal DA - 02.07.2025 KW - Coda wave interferometry KW - Damage detection KW - Prestress loss KW - Seismic interferometry KW - Structural health monitoring PY - 2025 AN - OPUS4-64211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa T1 - Development of a Handheld Device for the Trace Detection of Explosives N2 - With the help of the EXIST research transfer the startup True Detection System (TDS) will develop a portable and easy-to-use handheld device based on chemical-optical sensors that can detect the smallest traces of various explosives and markers (e.g. TNT, C4, ANFO, TATP, DMDNB, etc.) and pure salts (e.g. potassium nitrate) reliably and without major cross-sensitivities. The device has been developed over the last 10 years at the Federal Institute for Material Research and Testing (BAM) in cooperation with an SME. Within the next 18 months, a laboratory prototype will now be converted into a commercial device. T2 - Photonics Days Berlin Brandenburg CY - Berlin, Germany DA - 09.10.2023 KW - Explosives KW - Trace detection KW - Handheld device KW - Lab-on-a-chip KW - Start-up PY - 2023 AN - OPUS4-58541 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -