TY - CONF A1 - Agasty, Amit A1 - Costard, Rene A1 - Hering, Marcus A1 - Chruscicki, Sebastian A1 - Hicke, Konstantin A1 - Hüsken, Götz T1 - Assessment of the Application of Scaling Concepts for Blast Effects Analysis N2 - Blast testing finds its implementation in several applications, e.g. for the purpose of investigation into accidental or intentional explosions, or for an assessment of the level of protection provided by a certain structural configuration. Analytical and/or semi-empirical methods are generally limited to preliminary assessments prior to blast testing. Applications of numerical simulations with hydrocodes coupled with finite element methods (FEM) can only reduce the amount of blast testing required, as these necessitate fulfillment of the fundamental prerequisites of model verification and that of model validation. Field tests are implemented for contact detonations as well as near-field blast scenarios and shock tube tests for far-field blast scenarios. However, these can be extremely resource intensive. Reliable small-scale experiments are a promising alternative. The concepts of dimensional analysis and similarity based on Buckingham’s Π-theorem (1914) have been applied in different fields. For applications to the phenomenon of shock wave propagation, Hopkinson-Cranz or cube-root scaling is a well-established concept. When it comes to scaling the structural response, research has predominantly focused on structures made of metallic materials. Scaled investigations with concrete or reinforced concrete (RC) structures remain limited. The lack of even the most basic guidelines (far from any ‘standardized scaling methods’ for blast tests) show that scaling as a method is not yet established in blast effects analysis. In this preliminary study, we present a systematic approach and evaluation of scaling of blast effects analysis for RC slabs in order to develop guidelines for resource efficient testing methods. We study the blast scenario at two different scales. The focus of these investigations has been on evaluation of scaling of dynamics using pressure sensors, acceleration sensors and fiber optic sensing cables for distributed acoustic sensing (DAS). Further, the resulting plastic behavior upon blast is characterized by distributed strain sensing (DSS) along the same cables. T2 - 27th International Symposium on Military Aspects of Blast and Shock (MABS27) CY - Colmar, France DA - 06.10.2025 KW - Similarity and scaling KW - Blast KW - RC-slabs PY - 2025 SP - 1 EP - 11 AN - OPUS4-64617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krenek, S. A1 - Eisermann, R. A1 - Failleau, G. A1 - Lu, Xin A1 - Thomas, P. A1 - Kjeldsen, H. A1 - Anhalt, K. T1 - Fibre-optic thermometry to support the clean energy transition N2 - The measurement and control of temperature plays a key role in achieving the European Green Deal targets for a low carbon energy system. Fibre-optic thermometry is an emerging technology that can improve temperature measurement in extreme environments for energy providers and industry due to its distributed sensing and immunity to electromagnetic fields. Various applications for optimisation and monitoring in the energy sector are described, covering the whole range from energy generation to transmission and consumption. However, fibre-optic thermometers have cross sensitivities to other quantities (e.g., strain and humidity) and ageing effects that need to be investigated, quantified and minimised to obtain traceable and reliable measurements. This is particularly important so that applications in critical infrastructure can benefit from future measurements that are not possible with conventional sensors. The European INFOTherm project aims to overcome the limitations that currently prevent the widespread use of fibre-optic thermometry by creating a dedicated European metrology infrastructure for research, development and calibration. First results on measurement uncertainty, improvement of measurement techniques and practical field tests are presented. KW - Industrial processes optimisation KW - Fibre-optic thermometry KW - Distributed temperature sensing KW - Traceability KW - Thermal energy storage KW - Electrical grid resilience PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-640075 DO - https://doi.org/10.1515/teme-2025-0044 SN - 2196-7113 VL - 92 IS - 9-10 SP - 392 EP - 405 PB - De Gruyter Brill AN - OPUS4-64007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liao, Chun-Man T1 - Assessment of prestress loss in a large-scale concrete bridge model under outdoor condition N2 - The presentation shows that subtle variations in coda wave velocity can capture minor temperature effects, offering a good understanding of how a outdoor prestressed concrete structure responds to environmental conditions over time. Ultimately, this work contributes to development of more comprehensive and resilient structural health monitoring strategies for prestressed concrete infrastructure. T2 - EVACES 2025 CY - Porto, Portugal DA - 02.07.2025 KW - Coda wave interferometry KW - Damage detection KW - Prestress loss KW - Seismic interferometry KW - Structural health monitoring PY - 2025 AN - OPUS4-64211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa T1 - Development of a Handheld Device for the Trace Detection of Explosives N2 - With the help of the EXIST research transfer the startup True Detection System (TDS) will develop a portable and easy-to-use handheld device based on chemical-optical sensors that can detect the smallest traces of various explosives and markers (e.g. TNT, C4, ANFO, TATP, DMDNB, etc.) and pure salts (e.g. potassium nitrate) reliably and without major cross-sensitivities. The device has been developed over the last 10 years at the Federal Institute for Material Research and Testing (BAM) in cooperation with an SME. Within the next 18 months, a laboratory prototype will now be converted into a commercial device. T2 - Photonics Days Berlin Brandenburg CY - Berlin, Germany DA - 09.10.2023 KW - Explosives KW - Trace detection KW - Handheld device KW - Lab-on-a-chip KW - Start-up PY - 2023 AN - OPUS4-58541 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa T1 - Development of a handheld device for the trace detection of explosives N2 - This presentation introduces a new explosives trace detector (ETD), a handheld device developed by True Detection Systems (TDS). Addressing the limitations of current handheld detectors—such as unreliable measurements and cumbersome operation— the new ETD XT-1 integrates advanced sensor technology, including a Lab-on-a-Chip, to deliver high sensitivity and accuracy. Capable of detecting trace levels of substances like TNT, TATP, and ammonium nitrate, the device offers rapid, user-friendly detection through AI/ML-enhanced algorithms. These algorithms enable precise substance identification by analyzing absorption and desorption rates, significantly reducing false positives. The XT-1 has broad applications in security, hazardous material detection, and environmental monitoring. T2 - Photonics Days Berlin Brandenburg CY - Berlin, Germany DA - 09.10.2024 KW - Explosives KW - Trace detection KW - Handheld device KW - Lab-on-a-chip KW - Fluorescence PY - 2024 AN - OPUS4-61433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosenbusch, Sjard Mathis T1 - Gradient-enhanced models in blast simulations of concrete structures N2 - Blast experiments on reinforced concrete structures are often limited to small structures and therefore simple shock waves. Such experiments are carried out at the Bundesanstalt für Materialforschung und -prüfung (BAM) and the structural response is investigated using several measuring methods. Complex load scenarios that occur as a result of reflection of the shock wave in larger structures are harder to realize in practice. Numerical simulations for the propagation of the shock wave and the structural response can therefore be an alternative method for the investigation of blast loads on complex structures. For the simulation of concrete under impact and blast loads, several local constitutive models exist that are formulated as plasticity models with softening taken into account by introducing a scalar damage field. Local damage models however often lead to mesh-dependent results which do not converge with mesh refinement. In order to achieve meaningful predictions from numerical experiments, independence from the mesh is needed. In this contribution, the Johnson-Holmquist model (JH2) for brittle damage [2] has been implemented for the free open source software FEniCSx and is investigated in a high strain rate benchmark simulation. Mesh-convergence analyses show that displacements as well as the dissipated plastic energy do not converge with mesh-refinement. Following the gradient-enhancement approach by [1], a gradient-enhanced JH2 model which can be efficiently solved with explicit solvers is introduced and its advantages over the local models are discussed. Since many damage models for concrete share the damage mechanism of the JH2 model, the application of the regularization methods to more complex material models, like the RHT model [3], is also discussed. Advantages of a gradient-enhanced formulation to simulate dynamic strength increase of concrete, as suggested in [1], is discussed as well. T2 - ECCOMAS CONGRESS 2024 CY - Lisbon, Portugal DA - 03.06.2024 KW - Concrete Modeling KW - Explicit Dynamics KW - Gradient-Damage KW - Mesh Convergence PY - 2024 AN - OPUS4-64613 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosenbusch, Sjard Mathis T1 - Gradient-Enhanced Plasticity In Explicit Dynamics N2 - The simulation of concrete under impact and blast loads often relies on local constitutive models, typically formulated as plasticity models that incorporate softening through a scalar damage field. However, these local damage models frequently exhibit mesh-dependent results that fail to converge with mesh refinement. In earlier work, the mesh-dependency of a modified Johnson-Holmquist (JH2) model was effectively mitigated through a gradient-enhanced plasticity formulation in explicit dynamics [1]. The gradient-enhancement method for explicit dynamics, originally introduced in [3], involves modifying Peerlings' additional partial differential equation [2] for nonlocal equivalent plastic strain by incorporating inertia. This modification enables the use of explicit solvers, such as the central difference method. Despite these advancements, the model continues to face challenges, particularly slow convergence rates with mesh refinement, which are difficult to analyze due to the JH2 model's complexity. To address these challenges, this study investigates simpler plasticity models, such as von Mises plasticity and Drucker-Prager plasticity, combined with a nonlocal softening term. By systematically incorporating key characteristics of the JH2 model—namely, pressure-dependent yield surfaces, softening, residual yield strength at full damage and a nonlinear volumetric stress responses via an equation of state (EOS)—this work aims to further refine the gradient-enhanced JH2 model and extend these improvements to more complex plasticity models like the RHT model. T2 - GACM 2025 CY - Braunschweig, Germany DA - 21.09.2025 KW - Gradient-enhancement KW - Plasticity KW - Concrete modeling KW - Mesh Convergence PY - 2025 AN - OPUS4-64615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosenbusch, Sjard Mathis T1 - A gradient-enhanced JH2 model for dynamic simulations of concrete structures N2 - Concrete structures subjected to impact and blast loads experience complex failure mechanisms that are challenging to simulate accurately. Local constitutive models formulated using plasticity with softening are commonly used for this purpose. The softening behavior is typically represented by a scalar damage field, which scales the yield surface to capture the degradation of material strength. However, these local models often exhibit meshdependent results with localization of damage into a few cells. To address this limitation, this study combines a modified version of the Johnson-Holmquist (JH2) model with a gradientenhancement approach. The introduction of an inertia term into the additional PDE for the determination of the nonlocal equivalent plastic strain transforms it into a hyperbolic equation, enabling an efficient solution with an explicit dynamics solver. A one-dimensional benchmark simulation demonstrates the differences between the local and gradient-enhanced models. The local model shows severe damage localization and diminishing plastic energy dissipation with finer meshes. In contrast, the gradient-enhanced model distributes damage over multiple elements, though the plastic strain still localizes within a single element. Introducing strain hardening with respect to the local equivalent plastic strain resolves this issue, ensuring convergence of plastic energy and non-localizing plastic strain. These findings are extended and validated with two-dimensional simulations, showcasing the model’s practical relevance. Additionally, the impact of the added inertia term is analyzed in the context of dynamic strength enhancement, a critical characteristic of concrete under high strain rates. The proposed gradient-enhancement approach demonstrates improved numerical stability and mesh-independence compared to local models, making it a suitable tool for simulating concrete behavior under extreme loading conditions. T2 - GAMM 2025 CY - Posen, Poland DA - 07.04.2025 KW - Gradient-enhancement KW - Explicit dynamics KW - High strain rate KW - Concrete modelling PY - 2025 AN - OPUS4-64614 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian T1 - Abschätzung des Anschlagspotentials von Anzündern aus Fahrzeugen N2 - Untersuchung des Auslöseverhaltens von zwei Anzündern aus dem Bereich der Fahrzeugpyrotechnik an sekundären Explosivstoffen im Rahmen der Konformitätsbewertung von Pyrotechnik. T2 - 25. Internationalen Symposium des Bundeskriminalamtes für Sprengstoffermittelnde und Entschärfende unkonventioneller Spreng- und Brandvorrichtungen CY - Magdeburg, Germany DA - 01.12.2025 KW - Anzünder KW - Fahrzeugpyrotechnik KW - Sekundäre Explosivstoffe PY - 2025 AN - OPUS4-65008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klaus, Christian A1 - Soruco Aloisio, Ricardo A1 - Koch, Claudia A1 - Prellwitz, Matthias T1 - Towards Safety and Accuracy of Hydrogen Refuelling Stations through Digital Twins N2 - This paper presents digital quality infrastructure methods for hydrogen refueling stations using the Asset Administration Shell as a standardized digital twin. Implemented at BAM’s test platform, it integrates real-time sensor data, calibration certificates, and compliance documents to support traceable, interoperable asset management. In combination with AI and semantic tools, the system will enable predictive maintenance, remote audits, and improved safety. This approach reduces downtime, enhances transparency, and offers a scalable model demonstrating the potential of digital twins in advancing metrological traceability and operational efficiency in hydrogen technologies. T2 - IMEKO TC-6 International Conference on Metrology and Digital Transformation - M4DConf 2025 CY - Benevento, Italy DA - 03.09.2025 KW - Datenintregration KW - IT KW - Verwaltungsschale KW - Infrastruktur KW - OT KW - Open Source KW - Software PY - 2025 UR - https://www.m4dconf.org/ UR - https://www.sciencedirect.com/journal/measurement-digitalization SP - 1 EP - 6 AN - OPUS4-64951 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunert, Wiebke T1 - EU Projekt ODYSSEUS – Home-made explosives and Precursor N2 - Fighting terrorism requires an arsenal of tools. One of these is knowledge about explosive precursors – chemical substances that can be used for legitimate purposes, but can also be misused for the illicit manufacture of home-made explosives. In this context, the EU-funded ODYSSEUS project will develop effective and efficient prognostic, detection and forensic tools to improve prevention, countering and investigation of terrorist incidents involving home-made explosives. The knowledge will help in the development of tools for monitoring the chemical supply chain and sensing in (near) real-time explosive precursors. The tools will be field-tested in three operational use cases. T2 - 46. Informationstagung Sprengtechnik CY - Siegen, Germany DA - 25.04.2026 KW - Home-made explosives KW - Terror attacks KW - Precursor PY - 2025 AN - OPUS4-62999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grunert, Wiebke T1 - EU project ODYSSEUS – year 3 Final presentation N2 - Presentation of main results of the R&D project ODYSSEUS regarding home-made explosives. T2 - 24. Internationales Symposium des Bundeskriminalamtes für Sprengstoffermittelnde und Entschärfende unkonventioneller Spreng- und Brandvorrichtungen CY - Magdeburg, Germany DA - 25.11.2024 KW - Home-made explosives KW - Precurers KW - Terrorist attacks PY - 2024 AN - OPUS4-61837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Agasty, Amit T1 - Skalierung von Sprengversuchen N2 - Eine Machbarkeitsstudie zur ressourceneffizienten sicherheitstechnischen Bewertung. T2 - 25. Internationalen Symposium des Bundeskriminalamtes für Sprengstoffermittelnde und Entschärfende unkonventioneller Spreng- und Brandvorrichtungen CY - Magdeburg, Germany DA - 01.12.2025 KW - Sicherheitstechnische Bewertung KW - Sprengversuche KW - Skalierung KW - Numerische Simulationen PY - 2025 AN - OPUS4-65019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa T1 - Handgerät für den mobilen Einsatz zur Detektion von Sprengstoffspuren N2 - Mithilfe des EXIST-Forschungstransfers wird ein tragbares und leicht zu bedienendes Handgerät auf der Basis von chemisch-optischen Sensoren entwickelt, welches kleinste Spuren von verschiedensten Sprengstoffen und Markern (z.B. TNT, C4, ANFO, TATP, DMDNB etc.) und reine Salze (z. B. Kaliumnitrat) sicher und ohne größere Querempfindlichkeiten detektieren kann. Das Gerät wurde in den letzten 10 Jahren bei der Bundesanstalt für Materialforschung und -prüfung (BAM) entwickelt und wird von der 2024 ausgegründeten Firma Noxoon GmbH in ein kommerzielles Gerät überführt. Die Vorteile des Handgeräts sind die hohe Selektivität, die hohe Sensitivität, die schnelle Detektion in wenigen Sekunden bis zur Ergebnisanzeige sowie der schnelle und das geringe Gewicht des Gerätes von 900 g. Neben den Vorteilen findet sich auch zahlreiche Alleinstellungsmerkmale in der Benutzung des Gerätes. So können z.B. - reine Salze - Sprengstoffe in Gegenwart von Wasser - Sprengstoffe und Drogen in versiegelten Briefumschlägen detektiert werden. Ein besonderes Alleinstellungsmerkmal ist, dass eine Reinigung des Handgeräts nach Messungen von stark kontaminierten Proben nicht notwendig ist. Für den deutschsprachigen bzw. europäischen Raum existiert noch kein vergleichbares Gerät. Das kommerzielle Gerät soll ab 2025 auf den Markt gebracht werden und wird einen wichtigen Beitrag zur öffentlichen Sicherheit und zum Umweltschutz leisten. T2 - BBK Fachkongress "Forschung für den Bevölkerungsschutz" CY - Bonn, Germany DA - 05.02.2025 KW - Explosivstoffe KW - Detektion KW - Handgerät PY - 2025 AN - OPUS4-65031 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Biyikal, Mustafa T1 - Handgeräte zur Detektion von Sprengstoffspuren N2 - Der Übersichtsvortrag stellt den aktuellen Stand zu Handgeräten zur Detektion von Sprengstoffspuren vor. T2 - Symposium Anlagensicherheit 2025 CY - Hamburg, Germany DA - 04.02.2025 KW - Explosivstoffe KW - Detektion KW - Handgerät PY - 2025 AN - OPUS4-65029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thöns, Sebastian A1 - Stewart, M. G. T1 - On the cost-efficiency, significance and effectiveness of terrorism risk reduction strategies for buildings N2 - We analyse the performance of risk reduction strategies for Terrorist attacks with Improvised Explosive Devices (IEDs) for large governmental building structures in terms of cost-efficiency, significance and effectiveness Accounting for life safety in conjunction with societal preferences and capabilities. The approach builds upon an extended Bayesian pre-posterior decision analysis and the principles of the marginal lifesaving costs based on the Life Quality Index (LQI). The decision scenario is formulated for a decision maker responsible for the safety of governmental or large commercial buildings and consequently the direct risks, the indirect risks due to fatalities and economical importance of the building beside the expected cost for the individual risk reduction strategies are modelled, aggregated and optimised. The considered risk reduction strategies encompass an explicit consideration and distinction of information and actions such as (i) threat surveillance may trigger the temporary evacuation of the building, (ii) the implementation of protection provisions provided by codes and guidelines, (iii) a detailed progressive collapse assessment and specific protection measures and (iv) the combination of protection and surveillance. All considered strategies are found to contribute to risk reduction and can be costefficient, especially for higher threat probabilities. The risk reduction strategies comply with societal macroeconomic and demographical characteristics and societal preferences according to the LQI. The progressive collapse assessment with targeted protection measures is found to be the most cost-efficient, significant and effective counter-terrorism strategy. This finding points to the necessity for a comprehensive utilisation of scientific methods and sophisticated engineering for progressive collapse assessment to determine targeted protection measures. KW - Significance and effectiveness KW - Risk mitigation strategies KW - Terrorist attacks KW - Value of information KW - Bayesian probability KW - Reliability KW - Risk and decision analysis KW - Decision optimality PY - 2020 DO - https://doi.org/10.1016/j.strusafe.2020.101957 VL - 85 SP - 10195 PB - Elsevier Ltd. AN - OPUS4-50794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Camplese, Davide A1 - Cozzolino, Chiara A1 - Scarponi, Giordano Emrys A1 - Eberwein, Robert A1 - Otremba, Frank A1 - Cozzani, Valerio T1 - Safety Assessment of MLI Super-Insulation Systems for Cryogenic Liquid-Hydrogen Tanks in Fire Scenarios N2 - In the context of green energy transition, cryogenic tanks insulated by MLI and vacuum are emerging as a leading solution to store hydrogen in heavy-duty vehicles. However, the integrity of such tanks can be jeopardized by fire. In such a scenario, MLI materials degradation can occur, leaving the tank unprotected from the fire heat flux, with consequent rapid pressurization and a high risk of failure. This study presents a safety assessment of non-combustible MLI under fire exposure based on the estimation of the time to mechanical failure of the equipment. This is calculated through an innovative model that simulates the thermomechanical response of the tank, including the MLI thermal degradation and the pressure-relief valve (PRV) operation. The application to several case studies that consider a typical LH2 tank featuring a wide range of MLI configurations demonstrated the likelihood of failure in case of exposure to a hydrocarbon pool fire, providing also comprehensive insights into the impact of the insulation characteristics and operating conditions on the time to failure. T2 - Loss Prevention 2025 CY - Bologna, Italien DA - 09.06.2025 KW - LH2 KW - LNG KW - Fire KW - Insulation KW - Safety KW - Tank PY - 2025 DO - https://doi.org/10.3303/CET25116036 SN - 2283-9216 IS - 116 SP - 211 EP - 216 PB - AIDIC AN - OPUS4-63739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Scharff, Erik T1 - Untersuchungen zur Ausbreitung brennbarer Schwergase in längsdurchströmten Straßentunneln N2 - In combination with new types of drive technologies, more and more flammable gases could be introduced into the traffic area “road tunnel” in future. If these vehicles have an accident and the gases are subsequently released, there is the possibility that the mentioned substances show a heavy gas behavior due to their storage conditions. From a safety point of view, this scenario has to be assessed with regard to its effects on the tunnel structure and the people involved. The aim of the experimental investigations carried out in this work is to create the basis for such an analysis by investigating the spreading behavior of the gases after they have been released in the tunnel and determining the influence of individual geometric and operational parameters on this behavior. Specifically, this work is based on the scenario of a continuous, momentum-free release of propane within a vaulted road tunnel with active longitudinal ventilation. The tunnel-specific boundary conditions that are relevant to this scenario are first worked out by a theoretical analysis. The basis of the subsequent experimental part is formed by two test rigs built as part of the work, which are similar in their essential features, but differ in scale. In both facilities, the aforementioned release scenario was simulated under various boundary conditions based on an idealized tunnel segment. The dispersion behavior is primarily assessed by the averaged concentration distribution near the ground, which results from a large number of detectors arranged in the experimental area. The detectors operate on the principle of weakening infrared light in the presence of hydrocarbons. Measurements of the flow field properties accompany the concentration measurements. The conception of the test rig on a scale of 1:12 is based on dimensional analysis. The actual release campaign comprises a large number of individual experiments in which selected parameters were varied over the tunnel-relevant range. The predicted heavy gas behavior for propane emerged clearly in the experiments. In cases in which the cloud laterally reaches the tunnel walls, the gases are channeled, which is accompanied by reduced longitudinal dilution. It was possible to identify the release rate and the flow velocity as the factors that have the greatest influence. The former basically increased the concentration, while the latter decreased it. All other tested parameters resulted in more complex propagation situations, which force a differentiated consideration of the influence. Lifting the source from the ground also reduced the concentration. In the case of an eccentrically arranged source and a transverse slope of the roadway, the influence is largely limited to the lateral concentration distribution in the immediate vicinity of the source. Nevertheless, both parameters plus a possible longitudinal slope of the roadway only showed a slight effect on the area far-downstream from the source. In addition, the phenomenon of backlayering, which is known from the spreading of fire smoke in the tunnel, could be demonstrated with a steep longitudinal slope. Obstacles increased the complexity of the situation. While globally the dilution of the cloud is partly invariant to obstacles, locally an increase as well as a decrease in concentration can be observed under certain conditions. For the unobstructed tunnel, it was finally possible to define a dimensionless parameter that describes the curve of the longitudinal dilution on the ground within the heavy gas cloud. From this, a simple graphical nomogram is derived for the continuous release of heavy gases in an unobstructed tunnel environment, which can be used to estimate the concentration in relation of a dimensionless source distance. For exploring the real, undistorted behavior experiments were also carried out in original scale. Due to the similarity of both test rigs in terms of scale, the test results can also be used to check the scalability of the spreading situations. For that, two configurations that have already been examined in small scale were selected. The main limitation for test execution and regarding the scalability comparison was the dependence of the flow conditions within the test rig from external wind conditions which occurred despite of taken countermeasures. The large-scale release was associated with pronounced fog formation. The near-ground spreading corresponding to the heavy gas behavior could be confirmed. However, in detail the spread was far more unsteady. Looking at the time-averaged concentrations, the processes already known from the small-scale test were qualitatively well approximated. Remaining quantitative differences, however, require critical consideration. This discrepancy is more likely a consequence of the experimental compromises have to be made in the specific case. From the observed gas behavior, the development of a surface fire initiated by ignition of the re-leased gases is considered to be the most likely subsequent scenario for the release of heavy, flam-mable gases in tunnel-like enclosures. The thesis concludes with recommendations on the methodological approach to be favored in the future. KW - LNG KW - Schwergas KW - Stoffausbreitung KW - Propan PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:gbv:ma9:1-1981185920-1206411 DO - https://doi.org/10.25673/118683 VL - 2025 SP - 1 EP - 225 PB - Otto-von-Guericke-Universität Magdeburg, Fakultät für Verfahrens- und Systemtechnik CY - Magdeburg AN - OPUS4-65012 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hajhariri, Aliasghar T1 - Experimental and Numerical Investigation on Multi-layer Insulation Thermal Deterioration N2 - To reduce carbon dioxide emissions, energy carries such as hydrogen consider to be a solution. Consumption of hydrogen as a fuel meets several restrictions such as its low volumetric energy density in gas phase. To tackle this problem, storage as well as transportation in liquid phase is recommended. To be able to handle this component in liquid phase, an efficient thermal insulation e.g., MLI insulation is required. Some studies have been revealed vulnerability of this type of insulation against high heat flux, for instance a fire accident. Some investigations have been depicted the importance of consideration of the MLI thermal degradation in terms of its reflective layer. However, limited number of studies have been focused on the thermal degradation of spacer material and its effect on the overall heat flux. In this study, through systematic experimental measurements, the effect of thermal loads on glass fleece, glass paper as well as polyester spacers are investigated. The results are reported in various temperature and heat flux profiles. Interpreting the temperature profiles revealed as the number of spacers in the medium increases, the peak temperature detectable by the temperature sensor on the measurement plate decreases. Moreover, the contribution of each individual spacer in all cases regarding the experimental temperature range is assessed to be around 8%. This value may increase to around 50% for glass paper and polyester spacers, and to around 25% for glass fleece spacers as the number of spacer layers increases up to six layers. To utilize the outcomes of the experiment later and integrate the results into numerical and CFD simulations, a model is proposed for the mentioned experimental temperature range up to 300°C to predict a heat flux attenuation factor. The model proposes a fitting factor that can reproduce the least square fitted line to the experimental data. T2 - 15th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions Naples (ISHPMIE) CY - Naples, Italy DA - 10.06.2024 KW - Multi-Layer Insulation KW - Cryogenic KW - Liquid Hydrogen KW - Heat Transfer KW - Hydrogen Storage PY - 2024 AN - OPUS4-60457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberwein, Robert A1 - Hajhariri, Aliasghar A1 - Davide, Camplese A1 - Giordano, Emrys Scarponi A1 - Valerio, Cozzani A1 - Frank, Otremba T1 - Experimental investigation on the behavior of thermal super insulation materials for cryogenic storage tanks in fire incidents N2 - The number of vehicles using or transporting cryogenic fuels such as Liquefied Hydrogen (LH2) or Liquefied Natural Gas (LNG) increases fast in the land transportation sector. Does this also entail new risks? The storage of cryogenic fuels requires tanks with Thermal Super Insulations (TSI) to keep the fluid cold and limit the formation of boil-off gas. TSI has proven itself in some applications since the middle of the 20th century, but in the land transport sector they are still quite new, where accidents involving fires, collisions, and their combination are to be expected. This work focuses on investigating the behavior of different types of TSI while exposed to a heat source representing a fire. To this aim, a High-Temperature Thermal Vacuum Chamber (HTTVC) was applied, which allows the thermal loading of a thermal insulation material in a vacuum and measuring the heat flow transported through the TSI in parallel. In this study, the results of 6 samples are presented regarding 3 types of MLI, rock wool, perlites, and microspheres. The thermal exposure caused different effects on the samples. In practice, this can be connected to the rapid release of flammable gases as well as to a Boiling Liquid Expanding Vapour Explosion (BLEVE). These results are relevant for reducing the risks to people and infrastructures in the progressive establishment of tanks for cryogenic fluids in our industry and society. The data presented in the study can be used to improve the design of tanks and TSIs, the assessment of accident scenarios, and the development of measures for first responders. KW - Liquefied hydrogen KW - Liquefied natural gas KW - Tanks KW - Fire KW - Insulation KW - MLI KW - Perlite KW - Rock wool KW - Microspheres PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-599947 DO - https://doi.org/10.1016/j.psep.2024.04.131 SN - 0957-5820 VL - 187 SP - 240 EP - 248 PB - Elsevier AN - OPUS4-59994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberwein, Robert T1 - Cryogenic Storage Tanks In Fire Incidents N2 - The ongoing geo-political conflicts and the increasing need for the implementation of measures to improve the energetic system sustainability are increasing the importance of tanks for storing cryogenic fluids in the energy industry. The most common example of cryogenic tank applications is the transport of natural gas and hydrogen in their liquid form (LNG and LH2 respectively) for which, considering the same transport volume cryogenic storage ensures significantly higher transport capacities with respect storage based solely on overpressure. A common feature of all cryogenic transported fluids is that their condition must be maintained minimizing heat leaks from the environment as much as possible. This is achieved by the implementation of thermal super Insulations (TSI) systems based on e. g. rock wool, perlites, microspheres, multilayer insulations (MLI), and vacuum which have proven to be effective in applications. However, due to the relatively short period of use in some applications, the small number of documented incidents, and the still few investigations carried out in the field, the exploitation of such systems in the cryogenic fluids transport sector still suffers from insufficient knowledge about the course and consequences of incidents. Accidents involving collisions, fires, and their combination are quite common in the transportation sector and may generate extraordinary loads on the tank and its insulation system, eventually leading to tank failure. The present study focuses on the behavior of TSI systems in tanks when it is exposed to an external heat source representative of a hydrocarbon fire scenario. This may cause an increase of the heat flux into a tank by several orders of magnitude with respect to normal design conditions, thus inducing severe and in the TSI, causing the rapid release of flammable gas and even resulting in a Boiling Liquide Expanding Vapour Explosion (BLEVE). To study such scenarios a test rig was developed at BAM that allows testing of TSI at industrial conditions and enables subsequent analysis of TSI samples. This test rig considers the typical double-walled design of tanks for cryogenic fluids with vacuum and an additional insulating material in the interspace. Adjustable electrical heating elements simulate the fire on one side of the double wall. This process allows the implementation of repeatable heat loads of up to 100 kW/m². The other side of the double wall is represented by a fluid-supported heat exchanger, which allows the simulation of cold or cryogenic conditions in the test rig, and to determine the heat flux transmitted through the double wall. Thus, the test rig allows thermal loading and performance analysis of TSI samples at the same time. In the presentation, the results of diverse tested TSI systems will be presented and discussed. As a result of this study, the list of advantages and disadvantages for the choice of tested TSI expands. Within the test, all samples degraded as a consequence of a hydrocarbon fire-orientated thermal load. Strong differences in the behavior of the tested TSI systems over temperature, location, and time were observed. Additionally, the tested MLI insulations were significantly more resistant to their base materials. These results are relevant for the design, the definition of national and international regulations, the Risk assessment, and the development of safety concepts for cryogenic tanks. T2 - Cryogenic Storage Tanks CY - Munich, Germany DA - 18.04.2024 KW - LH2 KW - LNG KW - Fire KW - Insulation PY - 2024 AN - OPUS4-59921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -